This CL introduces a set of configuration options implemented as
a struct of booleans that together comprise the set of enabled
or detected features. The configuration options replace command-line
flags that were checked deep in the implementation. As such, it is
necessary to plumb them through multiple levels of abstraction.
R=ahaas@chromium.orgCC=mstarzinger@chromium.org
BUG=chromium:868844
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
Change-Id: I1b82f5826e4fd263f68e8cafcd923bac5818a637
Reviewed-on: https://chromium-review.googlesource.com/1163670
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Commit-Queue: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#55018}
This adds initial support for concurrently patching jump table slots. It
is needed once different Isolates share code (for the --wasm-shared-code
feature). We need to ensure that instructions holding the target address
within a jump table slot do not cross cache-line boundaries. To do this,
the jump table has been split into consecutive pages.
Note that this also adds a stress test for multiple threads hammering at
a single slot concurrently. The test is currently limited to the ia32
and the x64 architecture, but will be extended to cover others. The test
reliably triggers tearing of the target address on almost every run of
the test and hence serves to prevent regressions.
R=clemensh@chromium.org
TEST=cctest/test-jump-table-assembler
BUG=v8:8018
Change-Id: Ife56bbb61ffcae5d8906ca7b8c604b195603707c
Reviewed-on: https://chromium-review.googlesource.com/1163664
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54942}
The wasm/ directory is inconsistent in many places, often within the
same file. For all code that exists in a v8::internal::wasm namespace,
this CL removes any wasm:: qualifiers, which is especially helpful
since most types are already Wasm-named, such as WasmCode, WasmModule,
etc. Namespace qualifiers are redundant inside the wasm:: namespace and
thus go against the main point of using namespaces. Removing the
qualifiers for non Wasm-named classes also makes the code somewhat more
future-proof, should we move some things that are not really WASM-specific
(such as ErrorThrower and Decoder) into a higher namespace.
R=clemensh@chromium.org,mstarzinger@chromium.org
Change-Id: Ibff3e1e93c64c12dcb53c46c03d1bfb2fb0b7586
Reviewed-on: https://chromium-review.googlesource.com/1160232
Commit-Queue: Ben Titzer <titzer@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54862}
The instruction got removed from the proposal.
R=titzer@chromium.org
Bug: v8:7581
Change-Id: I3e27bad923544896ebf6ab8969e5c365a397f6c9
Reviewed-on: https://chromium-review.googlesource.com/1128754
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54402}
With the introduction of multiple tables the element section is able to
initialize any of the defined tables. However, the spec says that only
tables of type AnyFunc can be initialized.
With this CL we validate that entries in the element section only
target AnyFunc tables.
R=titzer@chromium.org
Bug: v8:7581
Change-Id: Ifea383b13c91f582813b2aa4f01a5f724575cfa0
Reviewed-on: https://chromium-review.googlesource.com/1130519
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54400}
Allow the decoding of multiple tables, and allow these tables to have
any reference type. In addition, rename function-tables (in different
occurrences) to tables.
R=titzer@chromium.org
Bug: v8:7581
Change-Id: I191ea8e303b76563f9d91ae7447b373c4760d8b8
Reviewed-on: https://chromium-review.googlesource.com/1019581
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54355}
With this CL we now also support the decoding of the AnyFunc
type. I will add the type more deeply in subsequent CLs.
R=titzer@chromium.org
Bug: v8:7581
Change-Id: I9f30706a442462f915adfd8f720eb65168b80bb8
Reviewed-on: https://chromium-review.googlesource.com/1014111
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54318}
Another pair of {std::unique_ptr} and {size_t} that can be stored as
one {OwnedVector}, which allows to pass it as one thing.
R=mstarzinger@chromium.org
Bug: v8:7754
Change-Id: Ideac0dbd390ba8147b6620daa86f0d3da6c3b609
Reviewed-on: https://chromium-review.googlesource.com/1118236
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54091}
Instead of storing both the {NativeModule} and the {WasmModule} in a
{Managed} object, just store the {WasmModule} in the {NativeModule}
directly. This fixes crashes that happen if the {Managed<WasmModule>}
dies before the {Managed<NativeModule>}.
R=mstarzinger@chromium.org
Bug: chromium:854794, v8:7879, v8:7889
Change-Id: I6b11729943fe7a03d225138782655ee5dafd26a6
Reviewed-on: https://chromium-review.googlesource.com/1118171
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54090}
This CL removes the friendship between {NativeModule} and
{NativeModuleSerializer}/{NativeModuleDeserializer}.
Instead, it adds a new public method ({AddDeserializedCode}) which is
being called from the deserializer.
Drive-by: Unify the argument order to {AddCode}, {AddOwnedCode} and
{WasmCode}.
R=mstarzinger@chromium.org
Bug: chromium:856938
Change-Id: I88943c90c45650e21ae6bc17395a17f86319c046
Reviewed-on: https://chromium-review.googlesource.com/1117075
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#54084}
This changes the WebAssembly pipeline to no longer expect source
position tables for {WasmCode} to be allocated on the GC'ed heap.
R=clemensh@chromium.org
BUG=v8:7721
Change-Id: Ib2c6e3d0840e47b83809f60519c0d1b94af186af
Reviewed-on: https://chromium-review.googlesource.com/1109686
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53961}
This test was not adapted for the jump table yet.
R=mstarzinger@chromium.org
Bug: v8:7867
Change-Id: Ifd03899b0757972525dcc54f04949635d03fa493
Reviewed-on: https://chromium-review.googlesource.com/1107624
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53878}
This is a reland of 733b7c8258.
The arm64 bug was fixed in https://crrev.com/c/1105051.
Original change's description:
> [wasm] Introduce jump table
>
> This introduces the concept of a jump table for WebAssembly, which is
> used for every direct and indirect call to any WebAssembly function.
> For lazy compilation, it will initially contain code to call the
> WasmCompileLazy builtin, where it passes the function index to be
> called.
> For non-lazy-compilation, it will contain a jump to the actual code.
> The jump table allows to easily redirect functions for lazy
> compilation, tier-up, debugging and (in the future) code aging. After
> this CL, we will not need to patch existing code any more for any of
> these operations.
>
> R=mstarzinger@chromium.org, titzer@chromium.org
>
> Bug: v8:7758
> Change-Id: I45f9983c2b06ae81bf5ce9847f4542fb48844a4f
> Reviewed-on: https://chromium-review.googlesource.com/1097075
> Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
> Reviewed-by: Ben Titzer <titzer@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#53805}
TBR=titzer@chromium.org,mstarzinger@chromium.org
Bug: v8:7758
Change-Id: I68555230c6db97e70f0b8fef784188f55ee04794
Reviewed-on: https://chromium-review.googlesource.com/1105158
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53829}
This reverts commit 733b7c8258.
Reason for revert: breaks arm64 gc-stress: https://ci.chromium.org/buildbot/client.v8.ports/V8%20Linux%20-%20arm64%20-%20sim%20-%20gc%20stress/11659
Original change's description:
> [wasm] Introduce jump table
>
> This introduces the concept of a jump table for WebAssembly, which is
> used for every direct and indirect call to any WebAssembly function.
> For lazy compilation, it will initially contain code to call the
> WasmCompileLazy builtin, where it passes the function index to be
> called.
> For non-lazy-compilation, it will contain a jump to the actual code.
> The jump table allows to easily redirect functions for lazy
> compilation, tier-up, debugging and (in the future) code aging. After
> this CL, we will not need to patch existing code any more for any of
> these operations.
>
> R=mstarzinger@chromium.org, titzer@chromium.org
>
> Bug: v8:7758
> Change-Id: I45f9983c2b06ae81bf5ce9847f4542fb48844a4f
> Reviewed-on: https://chromium-review.googlesource.com/1097075
> Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
> Reviewed-by: Ben Titzer <titzer@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#53805}
TBR=mstarzinger@chromium.org,titzer@chromium.org,clemensh@chromium.org,sreten.kovacevic@mips.com
Change-Id: Iea358db2cf13656a65cf69a6d82cbbc10d3e7e1c
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:7758
Reviewed-on: https://chromium-review.googlesource.com/1105157
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53807}
This introduces the concept of a jump table for WebAssembly, which is
used for every direct and indirect call to any WebAssembly function.
For lazy compilation, it will initially contain code to call the
WasmCompileLazy builtin, where it passes the function index to be
called.
For non-lazy-compilation, it will contain a jump to the actual code.
The jump table allows to easily redirect functions for lazy
compilation, tier-up, debugging and (in the future) code aging. After
this CL, we will not need to patch existing code any more for any of
these operations.
R=mstarzinger@chromium.org, titzer@chromium.org
Bug: v8:7758
Change-Id: I45f9983c2b06ae81bf5ce9847f4542fb48844a4f
Reviewed-on: https://chromium-review.googlesource.com/1097075
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53805}
Mutable globals are now included in the wasm v1 spec.
Bug: v8:7625
Change-Id: Ib9b92d8348102f99a3b92820d0057b2c11a1e49a
Reviewed-on: https://chromium-review.googlesource.com/1095650
Commit-Queue: Ben Smith <binji@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53683}
The isolate is mainly used for accounting purposes. As such, it
doesn't need a field in the WasmCodeManager, and cannot have one
if it is to be made isolate independent. Instead, pass the isolate
explicitly in the appropriate cases.
R=mstarzinger@chromium.org
BUG=v8:7424
Change-Id: I539c2b33692e57605a280530bd704ef25269ad0f
Reviewed-on: https://chromium-review.googlesource.com/1073412
Commit-Queue: Ben Titzer <titzer@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53676}
This CL estimates the sizes of the important managed objects in WASM:
the decoded module {WasmModule}, the native module that contains code
{NativeModule}, and the natively-allocated indirect and import tables
{WasmInstanceNativeAllocations}.
Since Managed<T> updates the isolate's external allocated memory,
it is no longer necessary to do so upon committing or releasing a
native module's memory.
R=mstarzinger@chromium.orgCC=ulan@chromium.org
Bug: v8:7424
Change-Id: Iff4e07d0d328383a925febd654ccbfc95f0930e9
Reviewed-on: https://chromium-review.googlesource.com/1079067
Commit-Queue: Ben Titzer <titzer@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53675}
Since we never extract pools from a {DisjointAllocationPool}, the
{Allocate} method can just return an {AddressRange}, and also {Merge}
just needs to merge a single {AddressRange}.
Drive-by: Make {AddressRange} a proper struct, for DCHECKs and better
accessors.
R=mstarzinger@chromium.org
Bug: v8:7754
Change-Id: I19fd02b2c6d8eb5316a5e994835b89be9cfa792b
Reviewed-on: https://chromium-review.googlesource.com/1090723
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53610}
The term memory usually refers to the wasm memory. In the
{NativeModule}, we store pools for allocated and available code space.
This CL changes naming to make clear that this is code space and not
memory.
R=titzer@chromium.org
Bug: v8:7754
Change-Id: I195bf5c9227ad246af302ae1e98f9c839a02adbf
Reviewed-on: https://chromium-review.googlesource.com/1061495
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#53208}
The WasmInstanceObject stores two new arrays:
- imported_mutable_globals_buffers_: a FixedArray of all the imported
globals' array buffers.
- imported_mutable_globals: a calloc'd array of Addresses pointing to
the mutable global in its array buffer.
When accessing the global, the generated code looks up the address in
imported_mutable_globals to find where to load/store.
Bug: v8:7625
Change-Id: I60844c21a788fce28f346455f10f2283d1c152e9
Reviewed-on: https://chromium-review.googlesource.com/1020602
Commit-Queue: Ben Smith <binji@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52794}
Wasm tier-up first compiles the whole module using Liftoff, and then
using Turbofan. The idea is to achieve fast start-up times by first
running Liftoff-compiled code. In the meantime we finish compilation
with Turbofan, and replace the Liftoff-compiled code as soon
as Turbofan finished compilation, thus achieving high performance.
Tier-up is enabled through the flag FLAG_wasm_tier_up.
Bug: v8:6600
Change-Id: I70552969c53d909a591666a1e7ce1ee1419b2f34
Reviewed-on: https://chromium-review.googlesource.com/1010422
Commit-Queue: Kim-Anh Tran <kimanh@google.com>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52759}
This CL splits the definition of ValueType and its helper functions
into its own header file.
R=clemensh@chromium.org
Bug: v8:7570
Change-Id: I3aa776edb45839d7d38836e131df45732c685310
Reviewed-on: https://chromium-review.googlesource.com/1021810
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52758}
The "Address" type is V8's general-purpose type for manipulating memory
addresses. Per the C++ spec, pointer arithmetic and pointer comparisons
are undefined behavior except within the same array; since we generally
don't operate within a C++ array, our general-purpose type shouldn't be
a pointer type.
Bug: v8:3770
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng;master.tryserver.blink:linux_trusty_blink_rel
Change-Id: Ib96016c24a0f18bcdba916dabd83e3f24a1b5779
Reviewed-on: https://chromium-review.googlesource.com/988657
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52601}
Add support for decoding anyref globals, and some drive-by cleanups.
R=titzer@chromium.org
Bug: v8:7581
Change-Id: I3527f996a3fa1a890918a5924e951fbafa394cf2
Reviewed-on: https://chromium-review.googlesource.com/997655
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52391}
This moves source position tables associated with WasmCode objects to be
located outside the garbage-collected heap. There now is a clear link to
the source position table from code, making the one-to-one relationship
and its lifetime explicit.
R=ahaas@chromium.org
BUG=v8:7424
Change-Id: I9d0b332732508c302ba525059ef02559f45aa2f6
Reviewed-on: https://chromium-review.googlesource.com/975565
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52178}
The new API supersedes the old `RegisterDefaultSignalHandler` and flag
combination. Now the embedder must explicitly call
`EnableWebAssemblyTrapHandler` to activate the trap handler and optionally
install the default signal handler. The old flag is now used only by D8 to
decide whether to call this function.
Bug: v8:5277
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
Change-Id: I05fbb2138138bfc95b14361aabd712db84789b4a
Reviewed-on: https://chromium-review.googlesource.com/963179
Commit-Queue: Eric Holk <eholk@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52081}
Instead of returning nullptr, just always call FatalProcessOutOfMemory
when we cannot allocate more memory.
In a follow-up CL, this should be extended to first try to run a GC and
see if this freed enough memory.
This CL is intentionally minimal in order to make it backmergable.
The unittest for WasmCodeManager needs to be refactored into a
parameterized test, such that each individual (parameterized) test can
die with OOM without affecting other tests.
R=mstarzinger@chromium.org
Bug: chromium:822266
Change-Id: I1336aa05ed50124b77ffaa4435ec9bed70e15c18
Reviewed-on: https://chromium-review.googlesource.com/966501
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52025}
The compilation state of a native module is now extracted into its own
datastructure. It reflects which functions are left to compile, and contains
task managers to accomplish parallel and asynchronous compilation.
Bug:
Change-Id: I45308c7b32ba78e6c83f2d260990846a653bbd9c
Reviewed-on: https://chromium-review.googlesource.com/958865
Commit-Queue: Kim-Anh Tran <kimanh@google.com>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#52013}
- Rename WasmCode::owner() to WasmCode::native_module() and
- Make {shared} field of WasmCompiledModule no-longer const, since
it had a setter masquerading under the
{OnWasmModuleDeserialization()}.
- Refactor and simplify the flow of "owner" in module-compiler.cc
R=mstarzinger@chromium.org
Change-Id: If9ee371124678fbbc845fc4e93279bf14f8f7ce8
Reviewed-on: https://chromium-review.googlesource.com/964263
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Commit-Queue: Ben Titzer <titzer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51959}
Function names are optional in wasm and might not be present for most
functions. Instead of storing an empty name with each function, this
change loads names, if present, on first access of the name.
This also fixes an inconsistency with streaming compilation. Under
streaming compilation, functions are compiled before parsing the name
section. Hence, they always received an empty name. With this change,
assignment of names is typically deferred until the whole module was
parsed.
Bug: chromium:820291
Change-Id: I86d76aa40b7c45897d152725547795c8b6b9b9ba
Reviewed-on: https://chromium-review.googlesource.com/955647
Commit-Queue: Stephan Herhut <herhut@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51909}
This changes the encoding of the {HandlerTable} from an array of Smi
values to a byte array. It allows embedding of said array into the
instruction stream of {Code} objects (similar to how safepoint tables
work). For interpreted bytecode the table is attached as a {ByteArray}
to the bytecode.
The advantage of this approach is a more compact encoding and also the
ability to move such tables easily off the GC'ed heap if needed (as is
done for WebAssembly code for example).
R=jarin@chromium.org
Change-Id: I3320415dff69b3d1053825bda0d667a28232bf6d
Reviewed-on: https://chromium-review.googlesource.com/934642
Commit-Queue: Michael Starzinger <mstarzinger@chromium.org>
Reviewed-by: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51589}
Tbr: jarin@chromium.org
Change-Id: I17477e2c82398b228a366a3d1fd8eb521dd51eae
Reviewed-on: https://chromium-review.googlesource.com/922270
Commit-Queue: Adam Klein <adamk@chromium.org>
Reviewed-by: Ben Titzer <titzer@chromium.org>
Reviewed-by: Brad Nelson <bradnelson@chromium.org>
Cr-Commit-Position: refs/heads/master@{#51317}
This CL centralizes constants related to decoding from several places
into one place and makes it no longer necessary to include
wasm-opcodes.h for some simple constants.
R=clemensh@chromium.org
Bug:
Change-Id: I53aa81e34167df467bc7455b717bf67083033943
Reviewed-on: https://chromium-review.googlesource.com/859764
Commit-Queue: Ben Titzer <titzer@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50503}
The problem was that parts of Simd8x16ShuffleOperand were uninitialized.
Original message:
[wasm] Stop decoding operands after error.
When we decode operands of WebAssembly instructions, we do not use the
current pc but a pc of the instruction plus some offset. However, the
pc of the instruction + offset can become invalid in case of a decoder
error. Therefore we have to stop decoding operands explicitly in case
of an error.
R=clemensh@chromium.org
Bug: chromium:795131
Change-Id: I732bc23547dbe531019d81a4397d22165a26d46b
Reviewed-on: https://chromium-review.googlesource.com/833934
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50211}
This reverts commit 6633ad56d8.
Reason for revert:
https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20arm64%20-%20sim%20-%20MSAN/builds/18850
Original change's description:
> [wasm] Stop decoding operands after error.
>
> When we decode operands of WebAssembly instructions, we do not use the
> current pc but a pc of the instruction plus some offset. However, the
> pc of the instruction + offset can become invalid in case of a decoder
> error. Therefore we have to stop decoding operands explicitly in case
> of an error.
>
> R=clemensh@chromium.org
>
> Bug: chromium:795131
> Change-Id: I3b7b45782c71a70364adf930bee3e94a1be88fea
> Reviewed-on: https://chromium-review.googlesource.com/832867
> Commit-Queue: Andreas Haas <ahaas@chromium.org>
> Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#50196}
TBR=ahaas@chromium.org,clemensh@chromium.org
Change-Id: I5a67f77285fdedc7f4645f8efaaf0087b4046011
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: chromium:795131
Reviewed-on: https://chromium-review.googlesource.com/832650
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50199}
When we decode operands of WebAssembly instructions, we do not use the
current pc but a pc of the instruction plus some offset. However, the
pc of the instruction + offset can become invalid in case of a decoder
error. Therefore we have to stop decoding operands explicitly in case
of an error.
R=clemensh@chromium.org
Bug: chromium:795131
Change-Id: I3b7b45782c71a70364adf930bee3e94a1be88fea
Reviewed-on: https://chromium-review.googlesource.com/832867
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50196}
- Creates a memory management API in v8::internal, which corresponds
to the existing one in base::OS.
- Implements the new API in terms of the old one.
- Changes all usage of the base::OS API to the one in v8::internal. This
includes all tests, except platform and OS tests.
- Makes OS:: methods private.
- Moves all LSAN calls into the v8::internal functions.
Bug: chromium:756050
Cq-Include-Trybots: master.tryserver.chromium.linux:linux_chromium_rel_ng
Change-Id: Iaa3f022e3e12fdebf937f3c76b6c6455014beb8a
Reviewed-on: https://chromium-review.googlesource.com/794856
Commit-Queue: Bill Budge <bbudge@chromium.org>
Reviewed-by: Eric Holk <eholk@chromium.org>
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Cr-Commit-Position: refs/heads/master@{#50139}
Rename to better capture what the files contain.
Removed includes of wasm-code-manager.h from .h files to improve
build time.
Bug:
Change-Id: I0f0108cfb00b061c4433b6ff9670e9c4cae9c699
Reviewed-on: https://chromium-review.googlesource.com/807368
Reviewed-by: Ben Titzer <titzer@chromium.org>
Commit-Queue: Mircea Trofin <mtrofin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49875}
