Reason:
Regressions in various benchmarks.
Revert "Revert of Revert of [strong] Implement strong mode restrictions on property access (patchset #1 id:1 of https://codereview.chromium.org/1189153002/)"
This reverts commit 41405c0470.
Revert "X87: Revert of Revert of [strong] Implement strong mode restrictions on property access."
This reverts commit 48de5f4d6b.
Revert "Fix overlapping KeyedLoadIC bitfield."
This reverts commit 4e6c956abf.
Revert "MIPS64: Fix 'Revert of Revert of [strong] Implement strong mode restrictions on property access'."
This reverts commit 74f97b0d2a.
BUG=
Review URL: https://codereview.chromium.org/1199493002
Cr-Commit-Position: refs/heads/master@{#29166}
The three different concerns that the ControlReducer used to deal with
are now properly separated into
a.) DeadCodeElimination, which is a regular AdvancedReducer, that
propagates Dead via control edges,
b.) CommonOperatorReducer, which does strength reduction on common
operators (i.e. Branch, Phi, and friends), and
c.) GraphTrimming, which removes dead->live edges from the graph.
This will make it possible to run the DeadCodeElimination together with
other passes that actually introduce Dead nodes, i.e. typed lowering;
and it opens the door for general inlining without two stage fix point
iteration.
To make the DeadCodeElimination easier and more uniform, we basically
reverted the introduction of DeadValue and DeadEffect, and changed the
Dead operator to produce control, value and effect. Note however that
this is not a requirement, but merely a way to make dead propagation
easier and more uniform. We could always go back and decide to have
different Dead operators if some other change requires that.
Note that there are several additional opportunities for cleanup now,
i.e. OSR deconstruction could be a regular reducer now, and we don't
need to use TheHole as dead value marker in the GraphReducer. And we can
actually run the dead code elimination together with the other passes
instead of using separate passes over the graph. We will do this in
follow up CLs.
R=jarin@chromium.org, mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1193833002
Cr-Commit-Position: refs/heads/master@{#29146}
Implements the strong mode proposal's restrictions on property access.
To be fully explored in a followup: proxies, interceptors, access checks, load from super
BUG=v8:3956
LOG=N
Review URL: https://codereview.chromium.org/1168093002
Cr-Commit-Position: refs/heads/master@{#29109}
This turns the CommonOperatorReducer into an AdvancedReducer and makes
it independent of JSGraph (which was used only because it was convienent),
and let's the CommonOperatorReducer run together with the ControlReducer.
The ControlReducer is still not able to run together with other reducers,
but we're getting closer. The plan is to split the ControlReducer into
two parts: The dead code elimination part and the common operator
reduction part. This separation will help to avoid tricky bugs in the
future and should make testing a *lot* easier.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1192063002
Cr-Commit-Position: refs/heads/master@{#29105}
We never hit the phi case for DecideCondition in practice, since a more
general optimization is already performed by typing and constant
propagation.
R=jarin@chromium.org,mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1186973005
Cr-Commit-Position: refs/heads/master@{#29102}
Delayed tasks can be used to perform non-urgent clean up work.
BUG=chromium:490559
LOG=NO
Review URL: https://codereview.chromium.org/1179153002
Cr-Commit-Position: refs/heads/master@{#29084}
Up until now that was still mixed with control reduction in the
ControlReducer. This separation allows us to remove the horrible
Reducer::Finish hack and also do graph trimming at more appropriate
places in the pipeline (i.e. trim dead nodes after generic lowering,
which can also make nodes dead).
R=jarin@chromium.org,mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1188433010
Cr-Commit-Position: refs/heads/master@{#29077}
This optimization just duplicates part of the ToBoolean rule in the
Typer, and it doesn't make sense to have adhoc partial typing rules in
the ControlReducer anyway.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1189963002
Cr-Commit-Position: refs/heads/master@{#29064}
This ensures there is a lazy bailout point at the entry of every
exception handler so that deoptimized code is not re-entered through
caught exceptions.
R=jarin@chromium.org
TEST=cctest/test-run-deopt/DeoptExceptionHandler
Review URL: https://codereview.chromium.org/1173253004
Cr-Commit-Position: refs/heads/master@{#29061}
This patch implements %_IsTypedArray in fullcodegen, Hydrogen and
Turbofan in order to implement fast type checks to enable ES6
TypedArray features and semantics efficiently.
R=adamk,titzer
LOG=Y
BUG=v8:4085
Review URL: https://codereview.chromium.org/1183213002
Cr-Commit-Position: refs/heads/master@{#29033}
Up until now we used int32_t for NodeId, but that was not ideal because
negative values are invalid for NodeId and we use it as an array index
for example in the NodeMarker class, where C++ compilers on x64 have to
generate code that does proper sign extension for the indices, which is
completely unnecessary.
R=svenpanne@chromium.org
Review URL: https://codereview.chromium.org/1178403004
Cr-Commit-Position: refs/heads/master@{#28997}
With this patch, we can generate simple immediate-shift instructions for
immediates outside the range "0 <= imm < width". Several related
instruction selectors have also been updated accordingly.
Example of generated code:
---- Before --- ---- After ----
movz w0, #33 lsr w0, w1, #1
lsr w0, w1, w0
BUG=
Review URL: https://codereview.chromium.org/1179893003
Cr-Commit-Position: refs/heads/master@{#28977}
Before selecting multiply-accumulate for a multiplication with add operation,
check that the multiply can't be reduced to add-with-shift. This prevents
simple multiplications by 3, 5, etc turning into register moves and madd
instructions.
Review URL: https://codereview.chromium.org/1180863002
Cr-Commit-Position: refs/heads/master@{#28976}
Merge a following arithmetic or logical right shift into the existing shift
of ARM64's Int32MulHigh or Uint32MulHigh code.
BUG=
Review URL: https://codereview.chromium.org/1179503003
Cr-Commit-Position: refs/heads/master@{#28945}
Reason for revert:
Breaks InstructionSelectorTest.Word64ShrWithWord64AndWithImmediate on debug builds (but not optdebug builds). I'll investigate.
Original issue's description:
> [arm64][turbofan]: Handle any immediate shift.
>
> With this patch, we can generate simple immediate-shift instructions for
> immediates outside the range "0 <= imm < width". Several related
> instruction selectors have also been updated accordingly.
>
> Example of generated code:
>
> ---- Before --- ---- After ----
> movz w0, #33 lsr w0, w1, #1
> lsr w0, w1, w0
>
> BUG=
>
> Committed: https://crrev.com/36d771bbfa4af5efcc1c1dcf5b234445cb7ee722
> Cr-Commit-Position: refs/heads/master@{#28943}
TBR=bmeurer@chromium.org,ulan@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1176393002
Cr-Commit-Position: refs/heads/master@{#28944}
With this patch, we can generate simple immediate-shift instructions for
immediates outside the range "0 <= imm < width". Several related
instruction selectors have also been updated accordingly.
Example of generated code:
---- Before --- ---- After ----
movz w0, #33 lsr w0, w1, #1
lsr w0, w1, w0
BUG=
Review URL: https://codereview.chromium.org/1179733004
Cr-Commit-Position: refs/heads/master@{#28943}
This is needed in order to allow expansion of a throwing node into a
set of nodes that produce different effects for the successful and the
exceptional continuation.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1179543002
Cr-Commit-Position: refs/heads/master@{#28918}
This deprecates the aforementioned mutator in favor of a simpler
NodeProperties::ReplaceUses that doesn't perform any relaxation.
Preparation for enabling support for try-catch statements.
R=bmeurer@chromium.org
TEST=unittests/NodePropertiesTest
Review URL: https://codereview.chromium.org/1172773003
Cr-Commit-Position: refs/heads/master@{#28897}
This adds handling of JSLoadDynamicContext nodes to JSTypedLowering to
perform extension checks and an inline fast path. The fast path is a
context slot load targeting a specific context.
R=bmeurer@chromium.org
BUG=v8:4131
LOG=N
Review URL: https://codereview.chromium.org/1155543003
Cr-Commit-Position: refs/heads/master@{#28823}
This in turn allows usage of AdvancedReducer::ReplaceWithValue which
has access to the underlying graph reducer. It will allow us to deal
with exception continuations correctly.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1158273011
Cr-Commit-Position: refs/heads/master@{#28813}
This allows any AdvancedReducer to remove exception projections from
graphs. This is the common case when JS-operators are being replaced
with pure values. The old NodeProperties::ReplaceWithValue is being
deprecated in favor of AdvancedReducer::ReplaceWithValue.
R=titzer@chromium.org
TEST=unittests/AdvancedReducerTest
Review URL: https://codereview.chromium.org/1168693002
Cr-Commit-Position: refs/heads/master@{#28810}
In typed lowering we can use the ReferenceEqual simplified operator
instead of ObjectIsSmi to check for context extensions. This generates
the desired code.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1163963003
Cr-Commit-Position: refs/heads/master@{#28776}
Select ubfiz for (x & mask) << imm where mask is contiguous and imm is non-zero.
BUG=
Review URL: https://codereview.chromium.org/1161643003
Cr-Commit-Position: refs/heads/master@{#28755}
This adds handling of JSLoadDynamicGlobal nodes to JSTypedLowering to
perform extension checks and an inline fast path. The fast path is a
global variable load from the global object.
R=bmeurer@chromium.org
BUG=v8:4131
LOG=N
Review URL: https://codereview.chromium.org/1150723005
Cr-Commit-Position: refs/heads/master@{#28750}
Unfortunately StringAdd is not pure in V8 because we might throw an
exception if the resulting string length is outside the valid bounds, so
there's no point in having a simplified StringAdd operator.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1164743002
Cr-Commit-Position: refs/heads/master@{#28747}
This introduces a conservative prediction for each exception handler
whether it will locally catch an exception or re-throw it to outside
the code bondaries. It will allow for a more intuitive prediction of
whether an exception is considered "caught" or "uncaught".
R=bmeurer@chromium.org,yangguo@chromium.org
BUG=chromium:492522
LOG=N
Review URL: https://codereview.chromium.org/1158563008
Cr-Commit-Position: refs/heads/master@{#28681}
The control flow optimization should work independent of the JSGraph. We
used the JSGraph there because it was convinient, not because it was
necessary.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1160863003
Cr-Commit-Position: refs/heads/master@{#28674}
The SimplifiedOperatorReducer is (mostly) unused, except for the very
rough store elimination, and just eats compilation time.
R=jarin@chromium.org
Review URL: https://codereview.chromium.org/1162563002
Cr-Commit-Position: refs/heads/master@{#28673}
If both inputs to JSStrictEqual/JSStrictNotEqual are unique values (i.e.
values with a canonical representation), we can lower the comparison to
ReferenceEqual instead of StringEqual or CompareIC.
Review URL: https://codereview.chromium.org/1154303002
Cr-Commit-Position: refs/heads/master@{#28646}
This way we don't need to connect (potentially) non-terminating loops
later during control reduction, which saves one forward pass over the
control graph. Long term we will move the trimming functionality of
the control reducer to the GraphReducer, and get rid of the Finish
method again.
As a bonus, this change also properly rewires Terminate, Throw and
Deoptimize during inlining.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1155683004
Cr-Commit-Position: refs/heads/master@{#28625}
This simplifies the handling of the End node. Based on this CL we will
finally fix terminating every loop from the beginning (via Terminate
nodes) and fix inlining of Throw, Deoptimize and Terminate.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1157023002
Cr-Commit-Position: refs/heads/master@{#28620}
This reduces the storage per-Node storage from 7 words to 6 and per-edge
storage from 6 words to 4.
On average this is about 10%-15% space savings over the whole graph.
Remove the use of std::deque as the out-of-line storage for inputs.
Reduce size of Use links and use pointer arithmetic to find Node
from Use.
R=mstarzinger@chromium.org,jarin@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1150923003
Cr-Commit-Position: refs/heads/master@{#28583}
