Fixed a bug in VisitForInAssignment. After visiting the object the value
to be stored was not loaded back to the accumulator. Also added two tests
to check this case.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1571753002
Cr-Commit-Position: refs/heads/master@{#33188}
Adds support for the CallRuntimeForPair bytecode to the Bytecode Graph
Builder. Modifies the FrameState support to allow updating of output
registers.
Also adds Eval tests to test-run-bytecode-graph-builder since these are
enabled by CallRuntimeForPair support.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1570623007
Cr-Commit-Position: refs/heads/master@{#33186}
The sloppy block-scoped function declaration placeholder statements
are held in parser_zone_-allocated hashtables. These hashtables are
not updated when local_zone_s are removed. Therefore, the
NewSloppyBlockFunctionStatement method should allocate
SloppyBlockScopeFunctionStatements in the parser_zone_ to avoid a
use-after-free. Scope fixup code may end up updating something which
is thrown away, but this is a small cost and much simpler than
removing dead hashtable entries later.
R=adamk
LOG=Y
BUG=chromium:537816
Review URL: https://codereview.chromium.org/1564923007
Cr-Commit-Position: refs/heads/master@{#33185}
Adds support for calling eval to the interpreter.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1508293003
Cr-Commit-Position: refs/heads/master@{#33184}
The reason is same as the CL #31808 (issue 1430943002, X87: Change the test case for X87 float operations), please refer: https://codereview.chromium.org/1430943002/
Here is the key comments from CL #31808
Some new test cases use CheckFloatEq(...) and CheckDoubleEq(...) function for result check. When GCC compiling the CheckFloatEq() and CheckDoubleEq() function, those inlined functions has different behavior comparing with GCC ia32 build and x87 build.
The major difference is sse float register still has single precision rounding semantic. While X87 register has no such rounding precsion semantic when directly use register value.
The V8 turbofan JITTed has exactly same result in both X87 and IA32 port.
So we add the following sentence to do type case to keep the same precision for Run_WasmCall_Float32Sub.
Such as: volatile float expect = *i +/- *j; // *i +/- *j, etc.
BUG=
Review URL: https://codereview.chromium.org/1561023002
Cr-Commit-Position: refs/heads/master@{#33143}
Several ports to enable r6 compact branch optimizations on MIPS64
Port 3573d3cb58
Original commit message:
MIPS: r6 compact branch optimization.
Port bddf8c9e08
Original commit message:
MIPS: Fix trampoline pool handling in MacroAssembler::BranchShort()
Port 6993cd0de5
Original commit message:
MIPS: Fix 'MIPS:r6 compact branch optimization.'
Jic and jialc compact branch ops are fixed as they does
not have 'forbidden slot' restriction. Also COP1 branches
(CTI instructions) added to IsForbiddenAfterBranchInstr().
Port bb332195d3
Original commit message:
MIPS: Fix trampoline pool handling in MacroAssembler::BranchShort()
Port c91bcf7192
Original commit message:
MIPS: Fix trampoline pool handling in MacroAssembler::BranchShort()
for r6.
BUG=
Review URL: https://codereview.chromium.org/1534183002
Cr-Commit-Position: refs/heads/master@{#33136}
Work around ppc assembler use of Mul, Div macros.
Disable several tests that fail for nosse4.
Disable several tests that fail for msan.
BUG=
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1562513002
Cr-Commit-Position: refs/heads/master@{#33126}
This increases the size of addressable constant pool entries for jumps
to match other bytecodes using operands indexing the constant pool.
This change also introduces reservations for constant pool entries.
Reservations are used for forward jumps to ensure a constant pool entry
will be available when the jump target (label) is bound and the jump is
patched up in the bytecode array.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1546683002
Cr-Commit-Position: refs/heads/master@{#33125}
New bytecodes for making registers with indicies wider than 1-byte
accessible.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1555713002
Cr-Commit-Position: refs/heads/master@{#33091}
After this change (https://codereview.chromium.org/1507903004) to type feedback
vector, wide bytecodes for global/keyed/named load-stores were not generated due
to a change in the number of type feedback vector slots. This cl fixes tests to
generate wide bytecodes.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1546923002
Cr-Commit-Position: refs/heads/master@{#33076}
Adds support for loads and stores to lookup slots to BytecodeGraphBuilder.
Also adds tests for them.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1541143003
Cr-Commit-Position: refs/heads/master@{#33075}
Use the same mechanism that is already available for Crankshaft to not
leak all kinds of things in TurboFan generated code. Long-term we will
support weakness in a better way, but for now, just use the
infrastructure that is already in place to avoid memory leaks via
TurboFan generated code.
R=jarin@chromium.org, ulan@chromium.org
Review URL: https://codereview.chromium.org/1555743003
Cr-Commit-Position: refs/heads/master@{#33073}
According to the ES2015 specification, bound functions are exotic
objects, and thus don't need to be implemented as JSFunctions. So
we introduce a new JSBoundFunction type to represent bound functions
and make them optimizable. This already improves the performance of
calling or constructing bound functions by 10-100x depending on the
use case because we avoid the crazy dance between JavaScript and C++
that was implemented in v8natives.js previously.
There's still room for improvement in the performance of actually
creating bound functions, which is also relevant in practice, but
we already have a plan how to accomplish that later.
The mips/mips64 ports were contributed by akos.palfi@imgtec.com.
CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
BUG=chromium:535408, chromium:571299, v8:4629
LOG=n
Committed: https://crrev.com/ca8623eaa468cba65a5adafcdfb4615966f43ce2
Cr-Commit-Position: refs/heads/master@{#33042}
Review URL: https://codereview.chromium.org/1542963002
Cr-Commit-Position: refs/heads/master@{#33044}
Reason for revert:
Breaks arm64 sim nosnap: https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20arm64%20-%20sim%20-%20nosnap%20-%20debug/builds/805/steps/Check/logs/function-bind
Original issue's description:
> [runtime] Introduce dedicated JSBoundFunction to represent bound functions.
>
> According to the ES2015 specification, bound functions are exotic
> objects, and thus don't need to be implemented as JSFunctions. So
> we introduce a new JSBoundFunction type to represent bound functions
> and make them optimizable. This already improves the performance of
> calling or constructing bound functions by 10-100x depending on the
> use case because we avoid the crazy dance between JavaScript and C++
> that was implemented in v8natives.js previously.
>
> There's still room for improvement in the performance of actually
> creating bound functions, which is also relevant in practice, but
> we already have a plan how to accomplish that later.
>
> The mips/mips64 ports were contributed by akos.palfi@imgtec.com.
>
> CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
> BUG=chromium:535408, chromium:571299, v8:4629
> LOG=n
>
> Committed: https://crrev.com/ca8623eaa468cba65a5adafcdfb4615966f43ce2
> Cr-Commit-Position: refs/heads/master@{#33042}
TBR=cbruni@chromium.org,hpayer@chromium.org,yangguo@chromium.org,akos.palfi@imgtec.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:535408, chromium:571299, v8:4629
Review URL: https://codereview.chromium.org/1552473002
Cr-Commit-Position: refs/heads/master@{#33043}
According to the ES2015 specification, bound functions are exotic
objects, and thus don't need to be implemented as JSFunctions. So
we introduce a new JSBoundFunction type to represent bound functions
and make them optimizable. This already improves the performance of
calling or constructing bound functions by 10-100x depending on the
use case because we avoid the crazy dance between JavaScript and C++
that was implemented in v8natives.js previously.
There's still room for improvement in the performance of actually
creating bound functions, which is also relevant in practice, but
we already have a plan how to accomplish that later.
The mips/mips64 ports were contributed by akos.palfi@imgtec.com.
CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
BUG=chromium:535408, chromium:571299, v8:4629
LOG=n
Review URL: https://codereview.chromium.org/1542963002
Cr-Commit-Position: refs/heads/master@{#33042}
Per request in https://codereview.chromium.org/1047213002/
These files will continue to have a lot of churn in next two months
as we finish support for MIPS r6 instruction set. When things settle
down, we will do a clang-format --full to clean them up. For now,
we'd prefer to be able to do easy diffs, and will do incremental
re-formats as we make changes.
BUG=
Review URL: https://codereview.chromium.org/1546973003
Cr-Commit-Position: refs/heads/master@{#33038}
We'll be able to optimize rest parameters in TurboFan similarly to the arguments array. This CL restores the previous behavior, and a follow-on will enable TurboFan optimization.
(TBR for rossberg since we discussed the revert beforehand. The only changes are a few lines related to tests and rebasing.)
TBR=rossberg@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1537683002
Cr-Commit-Position: refs/heads/master@{#33024}
Changes LoadGlobal, StoreGlobal, LoadNamedProperty, and StoreNamedProperty to accept
the name of variable instead of index into the constant pool entry. Also made
GetConstantPoolEntry as a private function since it is no longer used outside of
BytecodeArrayBuilder.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1546643002
Cr-Commit-Position: refs/heads/master@{#33020}
Adds support for deleting a variable in a lookup slot. Adds a new bytecode,
its implementation and tests. Also adds support for this bytecode to the
bytecode graph builder.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1542083002
Cr-Commit-Position: refs/heads/master@{#33019}
Add API-accessors for [[ProxyTarget]], [[ProxyHandler]]. Additionally
create new proxies and revoke proxies via the API.
BUG=v8:1543
LOG=n
Review URL: https://codereview.chromium.org/1542943002
Cr-Commit-Position: refs/heads/master@{#33013}
Consecutive registers are allocated in two passes. First we "reserve"
a set of registers and these get allocated when we actually use them.
If we request for a temporary register before we use all the consecutive
registers, the earlier implementation does not gaurantee that it allocates
outside the reservation for consecutive registers. This could cause problems
for example, in call_func(a, b++, c). This cl fixes
TemporaryRegisterScope::NewRegister, to return a new temporary register
outside the reservation for consecutive registers.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1531273002
Cr-Commit-Position: refs/heads/master@{#33005}
Adds implementation and tests for CreateMappedArguments and
CreateUnmappedArguments to bytecode graph builder.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1490283003
Cr-Commit-Position: refs/heads/master@{#33004}
Unexpectedly, websites depend on doing feature testing with
RegExp.prototype.sticky and browser testing with RegExp.prototype.toString().
ES2015 newly throws exceptions for both of these. In order to enable shipping
new ES2015 semantics, this patch puts in narrow workarounds for those two
cases, keeping their old behavior. UseCounters are added for how often
those particular cases come up, so we can see if it can be deprecated.
This reland replaces problematic legacy const usage with var, to
avoid issues with nosnap builds.
R=yangguo
CC=bmeurer
BUG=v8:4637,v8:4617
LOG=Y
CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
Review URL: https://codereview.chromium.org/1545633002
Cr-Commit-Position: refs/heads/master@{#33002}
Reason for revert:
Breaks nosnap: http://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20nosnap/builds/5883
Original issue's description:
> Add web compat workarounds for ES2015 RegExp semantics
>
> Unexpectedly, websites depend on doing feature testing with
> RegExp.prototype.sticky and browser testing with RegExp.prototype.toString().
> ES2015 newly throws exceptions for both of these. In order to enable shipping
> new ES2015 semantics, this patch puts in narrow workarounds for those two
> cases, keeping their old behavior. UseCounters are added for how often
> those particular cases come up, so we can see if it can be deprecated.
>
> R=yangguo
> BUG=v8:4637,v8:4617
> LOG=Y
> CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
>
> Committed: https://crrev.com/98f819c3e0c92d54a306cdacadda73cf96d21b52
> Cr-Commit-Position: refs/heads/master@{#32997}
TBR=yangguo@google.com,yangguo@chromium.org,littledan@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4637,v8:4617
Review URL: https://codereview.chromium.org/1546493003
Cr-Commit-Position: refs/heads/master@{#32999}
Unexpectedly, websites depend on doing feature testing with
RegExp.prototype.sticky and browser testing with RegExp.prototype.toString().
ES2015 newly throws exceptions for both of these. In order to enable shipping
new ES2015 semantics, this patch puts in narrow workarounds for those two
cases, keeping their old behavior. UseCounters are added for how often
those particular cases come up, so we can see if it can be deprecated.
R=yangguo
BUG=v8:4637,v8:4617
LOG=Y
CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
Review URL: https://codereview.chromium.org/1543723002
Cr-Commit-Position: refs/heads/master@{#32997}
The CL #32908 (https://codereview.chromium.org/1526293002) updated the Float64 test data and cause the RunFloat64Add and RunFloat64Sub test cases failed.
The reason is same as the CL #31808 (issue 1430943002, X87: Change the test case for X87 float operations), please refer: https://codereview.chromium.org/1430943002/
Here is the key comments from CL #31808
Some new test cases use CheckFloatEq(...) and CheckDoubleEq(...) function for result check. When GCC compiling the CheckFloatEq() and CheckDoubleEq() function,
those inlined functions has different behavior comparing with GCC ia32 build and x87 build.
The major difference is sse float register still has single precision rounding semantic. While X87 register has no such rounding precsion semantic when directly use register value.
The V8 turbofan JITTed has exactly same result in both X87 and IA32 port.
So we add the following sentence to do type case to keep the same precision for RunFloat64Add and RunFloat64Sub.
Such as: volatile double expect = *i +/- *j; // *i +/- *j, etc.
BUG=
Review URL: https://codereview.chromium.org/1533593003
Cr-Commit-Position: refs/heads/master@{#32988}
A pre-requisite for this change was changing the interpreter to use
Runtime::ForInStep to bring the interpreter implementation closer
to the turbofan implementation. Also required to flatten out the
cache parameters into the interpreter frame for de-opt.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1531693002
Cr-Commit-Position: refs/heads/master@{#32986}
The new implementation detects if the input value is outside i32 range
and traps it that case.
The range check is done as follows:
The input value is converted to int32 and then back to float. If the
result is the same as the truncated input value, then the input value
is within int32 range.
R=bmeurer@chromium.org
Review URL: https://codereview.chromium.org/1537393003
Cr-Commit-Position: refs/heads/master@{#32984}
After Cvt_d_uw macro, upper 32 bits of the output remain
unitnitialized which caused flaky failures on some tests on
MIPS32R6
TEST=cctest/test-assembler-mips/MIPS13,mjsunit/asm/int32-umod
BUG=
Review URL: https://codereview.chromium.org/1537973002
Cr-Commit-Position: refs/heads/master@{#32983}
This CL prepare newspace evacuation for parallel execution wrt. to actual
allocations. The priority for allocations is:
* Try to allocate from LAB if objects are below kMaxLabObjectSize
* Allocate directly (synchronized) from newspace for larger objects.
* Fall back to old space allocation (which will be backed by a local compaction
space in future).
Semantical change: Previously we did fall back to regular new space promotion if
we are OOM in old space. With this CL we fall back to new space promotion, which
could fail because of fragmentation, again leading to an old space allocation
that finally bails into OOM.
Newspace evacuation is still single threaded and requires further changes to
allocation site tracking.
BUG=chromium:524425
LOG=N
Review URL: https://codereview.chromium.org/1487853002
Cr-Commit-Position: refs/heads/master@{#32970}
Adds FrameState nodes to graphs built by the Bytecode Graph Builder, in
preparation for adding deopt support. Also adds a new
FrameStateType::kInterpretedFunction to allow for specialized deopt
stack translation for interpreted frames. Finally adds support for
disabling typed lowering of binary ops, since the current approach
relies on a FrameState hack which does not apply to interpreted frames
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1514413002
Cr-Commit-Position: refs/heads/master@{#32964}
This is based on the Skia Implementation.
More on the project can be found here:
https://docs.google.com/a/chromium.org/document/d/1_4LAnInOB8tM_DLjptWiszRwa4qwiSsDzMkO4tU-Qes/edit#heading=h.p97rw6yt8o2j
The V8 Tracing platform will replace the isolate->event_logger().
But since the current embedders (namely chromium) currently use the isolate->event_logger, I made the default implementation (event-tracer) call into isolate->event_logger if an event_logger was set.
Once the embedders properly implement the interface (for example in chromium it would look like this: https://codereview.chromium.org/707273005/), the default implementation will be doing nothing.
Once the embedders side is fixed, we will change how V8 uses the tracing framework beyond the call from Logger:CallEventLogger. (which would also include a d8 implementation)
BUG=v8:4560
LOG=N
Review URL: https://codereview.chromium.org/988893003
Cr-Commit-Position: refs/heads/master@{#32959}
Make WasmModule free it's own memory, avoid mixing stack and
heap allocations in tests. This fixes several memory leaks.
Fix several signed compare issues.
Fix several floating point warnings.
Don't setup heap as external, as then the GC can't collect it.
Disable some tests that fail under ASAN.
R=ahaas@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1538543002
Cr-Commit-Position: refs/heads/master@{#32948}
Introduce a new Apply builtin that forms a correct and optimizable
foundation for the Function.prototype.apply, Reflect.construct and
Reflect.apply builtins (which properly does the PrepareForTailCall
as required by the ES2015 spec).
The new Apply builtin avoids going to the runtime if it is safe to
just access the backing store elements of the argArray, i.e. if you
pass a JSArray with no holes, or an unmapped, unmodified sloppy or
strict arguments object.
mips/mips64 ports by Balazs Kilvady <balazs.kilvady@imgtec.com>
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux64_tsan_rel
BUG=v8:4413, v8:4430
LOG=n
R=yangguo@chromium.org
Committed: e4d2538911
Review URL: https://codereview.chromium.org/1523753002 .
Cr-Commit-Position: refs/heads/master@{#32929}
Reason for revert:
Breaks TSAN somewhow: http://build.chromium.org/p/client.v8/builders/V8%20Linux64%20TSAN/builds/7000
Original issue's description:
> [es6] Correct Function.prototype.apply, Reflect.construct and Reflect.apply.
>
> Introduce a new Apply builtin that forms a correct and optimizable
> foundation for the Function.prototype.apply, Reflect.construct and
> Reflect.apply builtins (which properly does the PrepareForTailCall
> as required by the ES2015 spec).
>
> The new Apply builtin avoids going to the runtime if it is safe to
> just access the backing store elements of the argArray, i.e. if you
> pass a JSArray with no holes, or an unmapped, unmodified sloppy or
> strict arguments object.
>
> mips/mips64 ports by Balazs Kilvady <balazs.kilvady@imgtec.com>
>
> CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
> BUG=v8:4413, v8:4430
> LOG=n
> R=yangguo@chromium.org
>
> Committed: e4d2538911TBR=yangguo@chromium.org,paul.lind@imgtec.com
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4413, v8:4430
Review URL: https://codereview.chromium.org/1533803002 .
Cr-Commit-Position: refs/heads/master@{#32928}
Introduce a new Apply builtin that forms a correct and optimizable
foundation for the Function.prototype.apply, Reflect.construct and
Reflect.apply builtins (which properly does the PrepareForTailCall
as required by the ES2015 spec).
The new Apply builtin avoids going to the runtime if it is safe to
just access the backing store elements of the argArray, i.e. if you
pass a JSArray with no holes, or an unmapped, unmodified sloppy or
strict arguments object.
mips/mips64 ports by Balazs Kilvady <balazs.kilvady@imgtec.com>
CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
BUG=v8:4413, v8:4430
LOG=n
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1523753002 .
Cr-Commit-Position: refs/heads/master@{#32927}
The FIRST-LAST_NONCALLABLE_SPEC_OBJECT_TYPE range was accidentially used
in field type tracking, where we should check for JSReceiver instead
(there's no need to exclude JSProxy or JSFunction from tracking).
And the use in %_ClassOf was actually wrong and didn't match the C++
implementation in JSReceiver::class_name() anymore. Now it's consistent
again.
R=yangguo@chromium.org
BUG=chromium:535408
LOG=n
Review URL: https://codereview.chromium.org/1535523003 .
Cr-Commit-Position: refs/heads/master@{#32926}
Adds support for loading and storing lookup variables.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1524803003
Cr-Commit-Position: refs/heads/master@{#32913}
This change adds support for local control flow when building graphs
from bytecode. The change ensures loop emitted from the bytecode
generator are in natural order so the only back branches are for loops.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1502243002
Cr-Commit-Position: refs/heads/master@{#32911}
If many threads use the same Isolate (or many Isolates) and then
terminate, their PerIsolateThreadData objects are never cleaned
up, resulting in a slow memory leak and, worse, the
PerIsolateThreadData chain getting larger and larger, adversely
affecting performance.
In this situation, embedders will now be encouraged to apply
DiscardThreadSpecificMetadata against any Isolate a thread is
done with, especially if the thread is about to terminate.
Note that it is harmless to run DiscardThreadSpecificMetadata
against an Isolate for which a thread has no thread data and
per-Isolate thread data can be reestablished if a thread starts
using an Isolate again after running DiscardThreadSpecificMetadata
against it.
It is, however, an embedder error to run
DiscardThreadSpecificMetadata against an Isolate in thread with a
Locker for the Isolate in the stack or against an Entered Isolate.
This change cannot cause any change in behavior in existing apps
as the only added coded can only be reached via the new
DiscardThreadSpecificMetadata method.
R=Jakob, jochen
BUG=
Review URL: https://codereview.chromium.org/1522703002
Cr-Commit-Position: refs/heads/master@{#32909}
Tests for
* aborting a full page.
* partially aborting a page.
* partially aborting a page with pointers between aborted pages.
* partially aborting a page with store buffer entries.
Also introduces force_oom() which prohibits a old space to
expand
BUG=chromium:524425
LOG=N
CQ_EXTRA_TRYBOTS=tryserver.v8:v8_linux_nosnap_rel,v8_linux_nosnap_dbg,v8_win_nosnap_shared_rel,v8_win_nosnap_shared_compile_rel
Review URL: https://codereview.chromium.org/1518803005
Cr-Commit-Position: refs/heads/master@{#32899}
The code generation for pushing call parameters on the stack does not
distinguish between float32 and float64 parameters because both are
stored in the same registers. Therefore float32 parameters require two
words on the stack. The wasm linkage, however, only considered one word
on the stack for float32 parameters, which caused the problem that
float32 parameters were not located correctly on the stack. I fixed the
problem by considering two words for float32 parameters on the stack.
R=bradnelson@chromium.org
Review URL: https://codereview.chromium.org/1529773003
Cr-Commit-Position: refs/heads/master@{#32893}
The TypeOfStub didn't test the undetectable bit properly if the instance
was also callable, and therefore returned "object" for document.all
(which is both undetectable and callable).
CQ_INCLUDE_TRYBOTS=tryserver.chromium.linux:linux_chromium_rel_ng;tryserver.blink:linux_blink_rel
R=yangguo@chromium.org
BUG=chromium:567998
LOG=n
Committed: https://crrev.com/02cc310370df7e51ac4f705038820066fdfd0cdc
Cr-Commit-Position: refs/heads/master@{#32852}
Review URL: https://codereview.chromium.org/1527863003
Cr-Commit-Position: refs/heads/master@{#32883}
The third argument optionally specifies the frame from which to step.
This feature is not used and not well tested.
R=jkummerow@chromium.org
BUG=chromium:569835
LOG=N
Review URL: https://codereview.chromium.org/1525993002
Cr-Commit-Position: refs/heads/master@{#32865}
The TypeOfStub didn't test the undetectable bit properly if the instance
was also callable, and therefore returned "object" for document.all
(which is both undetectable and callable).
R=yangguo@chromium.org
BUG=chromium:567998
LOG=n
Review URL: https://codereview.chromium.org/1527863003
Cr-Commit-Position: refs/heads/master@{#32852}
The test Run_Wasm_StoreMem_offset_oob contained an I64STORE instruction,
which is not yet implemented on 32 bit platforms. I turned off those
parts of the test on 32 bit platforms which contain I64 instructions.
R=bradnelson@chromium.org
Review URL: https://codereview.chromium.org/1526573002
Cr-Commit-Position: refs/heads/master@{#32842}
Debug-evaluate used to resolve stack variables that shadow
context variables incorrectly, since the stack variable is
not visible in the context chain.
To fix this, we limit local variables accessible by debug-
evaluate to the ones directly referenced inside the function.
What is not referenced by the function itself, is considered
optimized out and not accessible by debug-evaluate.
To achieve this, we duplicate the entire context chain up to
the native context, and write back changes after debug-
evaluate. Changes to the original context chain will however
be overwritten. This already happens for catch and block
scopes though.
Also fix a crash caused by declaring variables inside debug-
evaluate.
R=mstarzinger@chromium.org
BUG=v8:4593
LOG=N
Review URL: https://codereview.chromium.org/1500933002
Cr-Commit-Position: refs/heads/master@{#32828}
This is necessary to guarantee that the whole descriptor would be marked, otherwise DescriptorArray pretenuring would cause crashes.
Review URL: https://codereview.chromium.org/1520613006
Cr-Commit-Position: refs/heads/master@{#32812}
Before this change traps always returned a 32 bit word in tests. With this
change traps return either a 32 bit word or a64 bit word, depending on the size
of the actual return value of the test.
Additionally this CL implements the wasm instructions I64SCONVERTF32,
I64UCONVERTF32, I64SCONVERTF64, and I64UCONVERTF64.
R=titzer@chromium.org
Review URL: https://codereview.chromium.org/1519013003
Cr-Commit-Position: refs/heads/master@{#32800}
TryTruncateFloat32ToUint64 converts a float32 to a uint64. Additionally it
provides an optional second return value which indicates whether the conversion
succeeded (i.e. float32 value was within uint64 range) or not.
I implemented the new operator on x64, arm64, and mips64. @v8-ppc-ports, can you
please take care of the ppc64 implementation of the second output?
Additionally I fixed a bug on x64 and mips64 in the implementation of
TryTruncateFloat64ToUint64. Cases where the input value was between -1 and 0
were handled incorrectly.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com, v8-mips-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1512023002
Cr-Commit-Position: refs/heads/master@{#32796}
As discussed in person, this adds the code from v8-native-prototype into
V8 proper, guarded by GYP flags that do not build the code by default.
Passing wasm=on to 'make' or setting v8_wasm as a GYP flag activates
building of this code.
An additional header file is added to and exported from the compiler
directory, src/compiler/wasm-compiler.h. This exposes a limited interface
with opaque Node and Graph types to the decoder to build TF graphs, as
well as functions to compile WASM graphs.
The mjsunit tests added are blacklisted because they fail without the
WASM object exposed to JS, which is also disabled by the build config
option.
This corresponds closely to 5981e06ebc, with some formatting fixes and moving some files into src/compiler.
R=mstarzinger@chromium.org, bradnelson@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1504713014
Cr-Commit-Position: refs/heads/master@{#32794}
Reason for revert:
Need to figure out a better solution for this.
Original issue's description:
> Removes the Callee parameter from FunctionCallbackInfo.
>
> This will help us to instantiate AccessorPair's getters and setters only when they are needed.
>
> BUG=
>
> Committed: https://crrev.com/2fe34ebdcdee0f21b88daa4098a7918e91abb8fb
> Cr-Commit-Position: refs/heads/master@{#32759}
TBR=jochen@chromium.org,verwaest@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1520843002
Cr-Commit-Position: refs/heads/master@{#32787}
Reason for revert:
Failing on Win 32bit nosnap:
https://chromegw.corp.google.com/i/client.v8/builders/V8%20Win32%20-%20nosnap%20-%20shared/builds/10602
Original issue's description:
> [cctest] Add tests for aborting compaction of pages
>
> Tests for
> * aborting a full page.
> * partially aborting a page.
> * partially aborting a page with pointers between aborted pages.
> * partially aborting a page with store buffer entries.
>
> Also introduces force_oom() which prohibits a old space to
> expand
>
> BUG=chromium:524425
> LOG=N
TBR=ulan@chromium.org,hpayer@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:524425
Review URL: https://codereview.chromium.org/1514603008
Cr-Commit-Position: refs/heads/master@{#32785}
Tests for
* aborting a full page.
* partially aborting a page.
* partially aborting a page with pointers between aborted pages.
* partially aborting a page with store buffer entries.
Also introduces ShouldForceOOM() which prohibits a PagedSpace from expanding.
Compaction spaces refer to the corresponding actual space.
BUG=chromium:524425
LOG=N
Review URL: https://codereview.chromium.org/1511933002
Cr-Commit-Position: refs/heads/master@{#32783}
This will help us to instantiate AccessorPair's getters and setters only when they are needed.
BUG=
Review URL: https://codereview.chromium.org/1510483002
Cr-Commit-Position: refs/heads/master@{#32759}
Reason for revert:
Meeh. Now "V8 Linux - gcmole" bot has issues; apparently due to a somewhat exotic builder configuration.
Original issue's description:
> Re-land FastAccessorBuilder.
>
> ... using the RawMachineAssembler and the work in crrev.com/1407313004.
>
> The original change collided with crrev.com/1513543003.
>
> BUG=chromium:508898
> LOG=Y
>
> Committed: https://crrev.com/515d9ccd8e6df7bf2ca01e2a55aaad30226399e1
> Cr-Commit-Position: refs/heads/master@{#32742}
>
> patch from issue 1474543004 at patchset 260001 (http://crrev.com/1474543004#ps260001)
>
> Committed: https://crrev.com/ee5c38d7db907ff86dd4049721c0cb4bc90a6c4d
> Cr-Commit-Position: refs/heads/master@{#32753}
TBR=epertoso@chromium.org,mstarzinger@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=chromium:508898
Review URL: https://codereview.chromium.org/1517683002
Cr-Commit-Position: refs/heads/master@{#32754}
... using the RawMachineAssembler and the work in cl/1407313004
BUG=chromium:508898
LOG=Y
Review URL: https://codereview.chromium.org/1474543004
Cr-Commit-Position: refs/heads/master@{#32742}
MachineType is now a class with two enum fields:
- MachineRepresentation
- MachineSemantic
Both enums are usable on their own, and this change switches some places from using MachineType to use just MachineRepresentation. Most notably:
- register allocator now uses just the representation.
- Phi and Select nodes only refer to representations.
Review URL: https://codereview.chromium.org/1513543003
Cr-Commit-Position: refs/heads/master@{#32738}
This operator now provides a second output which indicates whether the
conversion from float32 to int64 was successful or not. The second output
returns 0 if the conversion fails, or something else if the conversion succeeds.
The second output can be ignored, which means that the operator can be used the
same as the original operator.
I implement the new operator on x64, arm64, and mips64. @v8-ppc-ports, can you
please take care of the ppc64 implementation of the second output?
R=titzer@chromium.org, v8-arm-ports@googlegroups.com, v8-mips-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1504363002
Cr-Commit-Position: refs/heads/master@{#32737}
This is in preparation for turning the flag off by default.
BUG=chromium:552100
LOG=n
Review URL: https://codereview.chromium.org/1511293002
Cr-Commit-Position: refs/heads/master@{#32729}
Compaction of the array with maps happens lazily upon adding new maps.
BUG=
Review URL: https://codereview.chromium.org/1481953002
Cr-Commit-Position: refs/heads/master@{#32717}
- Except 2x applications of ForceSet, where I still need to debug
why the expected replacement doesn't work as expected.
- Ca. 3/4 of the file is covered.
R=jochen@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1516483002
Cr-Commit-Position: refs/heads/master@{#32714}
Adds implementation and tests for CreateObjectLiteral, CreateArrayLiteral and CreateRegExpLiteral
to bytecode graph builder. Also changes these bytecodes to expect three operands instead of using
accumulator to pass one of the operands. This is done to avoid looking into the earlier nodes to
fetch operands in the bytecode graph builder. Also adds support for wide variant of these
bytecodes to bytecode generator and bytecode graph builder.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1503963002
Cr-Commit-Position: refs/heads/master@{#32710}
This operator now provides a second output which indicates whether the conversion from float64 to uint64 was successful or not. The second output returns 0 if the conversion fails, or something else if the conversion succeeds.
The second output can be ignored, which means that the operator can be used the same as the original operator.
I implement the new operator on x64 and arm64. @v8-mips-ports and @v8-ppc-ports, can you please take care of the mips64 and ppc64 implementation of the second output?
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1507703002
Cr-Commit-Position: refs/heads/master@{#32705}
It's expensive to walk all shared function infos during the gc atomic
pause. Instead, use WeakCells to implement this structure without
manual clearing.
Reland due to a bug when reusing entries in the optimized code map.
BUG=
Review URL: https://codereview.chromium.org/1508703002
Cr-Commit-Position: refs/heads/master@{#32696}
It's cumbersome to maintain IC profiler statistics all the time.
Let's just do it as needed.
BUG=
Review URL: https://codereview.chromium.org/1507903004
Cr-Commit-Position: refs/heads/master@{#32693}
Reconstructing which stdlib object is used within an asm.js
module seems wasteful, given the typer has already checked this.
Preserving this information in a form that can be queried in
the asm-wasm-builder which generating code.
BUG= https://code.google.com/p/v8/issues/detail?id=4203
TEST=test-asm-validator, test-parsing
R=titzer@chromium.org,marja@chromium.org,aseemgarg@chromium.org
LOG=N
Review URL: https://codereview.chromium.org/1508003002
Cr-Commit-Position: refs/heads/master@{#32687}
The new operator provides a second output which indicates whether the
conversion from float64 to int64 was successful or not. The second
output returns 0 if the conversion fails. If the conversion succeeds,
then the second output is differs from 0.
The second output can be ignored, which means that the operator can be
used the same way as the original operator.
I implemented the new operator on x64 and arm64. @v8-mips-ports and
@v8-ppc-ports, can you please take care of the mips64 and ppc64
implementation of the second output?
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1495213003
Cr-Commit-Position: refs/heads/master@{#32653}
The test expectations should fail consistently in both release and debug
builds. DCHECK is only meant for debug-only checks in production code.
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1506753002
Cr-Commit-Position: refs/heads/master@{#32639}
Attempt #<really big number>
Parses, and lazily rewrites Destructuring Assignment expressions. The rewriting strategy involves inserting a placeholder RewritableAssignmentExpression into the AST, whose content expression can be completely rewritten at a later time.
Lazy rewriting ensures that errors do not occur due to eagerly rewriting nodes which form part of a binding pattern, thus breaking the meaning of the pattern --- or by eagerly rewriting ambiguous constructs that are not immediately known
BUG=v8:811
LOG=Y
R=adamk@chromium.org, bmeurer@chromium.org, rossberg@chromium.org
Review URL: https://codereview.chromium.org/1309813007
Cr-Commit-Position: refs/heads/master@{#32623}
Having beefed up GetKeys() to support everything, use it for everything now.
This fixes Object.getOwnPropertyNames and Object.getOwnPropertySymbols for
Proxies, and gets rid of a bunch of code duplication.
BUG=v8:1543
LOG=n
Review URL: https://codereview.chromium.org/1498593006
Cr-Commit-Position: refs/heads/master@{#32620}
Fixing warnings which cause compilation to fail when compiling
using CLANG for MIPS
BUG=
Review URL: https://codereview.chromium.org/1493793002
Cr-Commit-Position: refs/heads/master@{#32619}
Reason for revert:
Seems to be (mostly) responsible for the most recent Speedometer regression, not 100% sure. Let's see what the bots have to say.
Original issue's description:
> Provide call counts for constructor calls, surface them as a vector IC.
>
> CallIC and CallConstructStub look so alike, at least in the feedback they gather even if the implementation differs...and CallIC has such a nice way of surfacing the feedback (CallICNexus), that there is a request to make CallConstructStub look analogous. Enter ConstructICStub.
>
> BUG=
>
> Committed: https://crrev.com/66d5a9df62da458a51e8c7ed1811dc9660f4f418
> Cr-Commit-Position: refs/heads/master@{#32452}
TBR=mvstanton@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=
Review URL: https://codereview.chromium.org/1489413006
Cr-Commit-Position: refs/heads/master@{#32599}
Fix several operations in the parser that rewrite constant expressions
to preserve knowledge regarding whether a value originally contained a ".".
This information is required to accurately validate Asm.js typing.
Making the assumption that if either side of a binary operation contains
a dot, that the rewritten expression should be treated as a double for
Asm.js purposes. This is a slight deviation from the spec (which
would forbid mix type operations).
BUG= https://code.google.com/p/v8/issues/detail?id=4203
TEST=test-asm-validator, test-parsing
R=titzer@chromium.org,marja@chromium.org,aseemgarg@chromium.org
LOG=N
Review URL: https://codereview.chromium.org/1492123002
Cr-Commit-Position: refs/heads/master@{#32581}
I added a flag to the CallDescriptor which indicates that the native
stack should be used for a CallObject instead of the js stack on arm64.
Additionally I removed the use of EmitPrepareArguments because the
current implementation does not work when float and int parameters are
mixed. I plan to fix it in a future CL, because currently I have a
problem figuring out the type of a parameter.
R=titzer@chromium.org, v8-arm-ports@googlegroups.com
Review URL: https://codereview.chromium.org/1494123002
Cr-Commit-Position: refs/heads/master@{#32577}
Adds implementation and tests for Inc and Dec to bytecode graph builder.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1499593002
Cr-Commit-Position: refs/heads/master@{#32562}
It didn't support subclassing case at all and in non-subclassing case the runtime
allocation didn't do the slack tracking step.
BUG=chromium:563339
LOG=Y
Review URL: https://codereview.chromium.org/1488023002
Cr-Commit-Position: refs/heads/master@{#32547}
These bits were relevant back when we had nested lexical modules, but
I don't think they'll be of any use for ES2015 modules.
Review URL: https://codereview.chromium.org/1485053002
Cr-Commit-Position: refs/heads/master@{#32534}
Split out of PropertyAttributes, and used for all filtering purposes.
Also moved PropertyAttributes into the v8::internal:: namespace.
No change in behavior intended.
Review URL: https://codereview.chromium.org/1492653004
Cr-Commit-Position: refs/heads/master@{#32525}
* Add a sibling interface to InterpreterAssembler called
CodeStubAssembler which provides a wrapper around the
RawMachineAssembler and is intented to make it easy to build
efficient cross-platform code stubs. Much of the implementation
of CodeStubAssembler is shamelessly stolen from the
InterpreterAssembler, and the idea is to eventually merge the
two interfaces somehow, probably moving the
InterpreterAssembler interface over to use the
CodeStubAssembler. Short-term, however, the two interfaces
shall remain decoupled to increase our velocity developing the
two systems in parallel.
* Implement the StringLength stub in TurboFan with the new
CodeStubAssembler. Replace and remove the old Hydrogen-stub
version.
* Remove a whole slew of machinery to support JavaScript-style
code stub generation, since it ultimately proved unwieldy,
brittle and baroque. This cleanup includes removing the shared
code stub context, several example stubs and a tangle of build
file changes.
BUG=v8:4587
LOG=n
Review URL: https://codereview.chromium.org/1475953002
Cr-Commit-Position: refs/heads/master@{#32508}
