The old code used a separate HToInt32 instruction which had a wrong register
constraint for the input register which caused wrong result when the stored value
is used after a typed array store. (UseRegister instead of UseTempRegister) when no
SSE3 is available.
This change fixes it by replacing HToInt32 with the corresponding HChange
instruction which has correct register contraints.
TEST=mjsunit/compiler/regress-toint32.js
Review URL: https://chromiumcodereview.appspot.com/9565007
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10891 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This CL is a step towards removing ZoneObject's new operator without a Zone
parameter, which uses Isolate::Current. For e.g. the bulletben benchmark, this
CL reduces the number of calls to this new operator by roughly 120k, but we are
still left with 780k calls from other sites...
Review URL: https://chromiumcodereview.appspot.com/9487010
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10860 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Only JSObject enumerables with enum cache (fast case properties, no interceptors, no enumerable properties on the prototype) are supported.
HLoadKeyedGeneric with keys produced by for-in enumeration are recognized and rewritten into direct property load by index. For this enum-cache was extended to store property indices in a separate array (see handles.cc).
New hydrogen instructions:
- HForInPrepareMap: checks for-in fast case preconditions and returns map that contains enum-cache;
- HForInCacheArray: extracts enum-cache array from the map;
- HCheckMapValue: map check with HValue map instead of immediate;
- HLoadFieldByIndex: load fast property by it's index, positive indexes denote in-object properties, negative - out of object properties;
Changed hydrogen instructions:
- HLoadKeyedFastElement: added hole check suppression for loads from internal FixedArrays that are knows to have no holes inside.
R=fschneider@chromium.org
BUG=
TEST=
Review URL: https://chromiumcodereview.appspot.com/9425045
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10794 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This extends the current support for nested object literals we already
have in Crankshaft, to also support nested array literals and mixed
nested literals containing arrays and objects. All three types are
generated by the unified HFastLiteral instruction.
All previous upper bounds on nested literal graphs remain unchanged,
keeping the size of generated code in check.
The main intention is to boost performance of two-dimensional array
literals containing constant elements (aka. matrices).
R=danno@chromium.org
TEST=mjsunit/compiler/literals-optimized
Review URL: https://chromiumcodereview.appspot.com/9403018
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10734 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This change enables optimization of top-level and eval-code. For this to work, it adds
support for declaring global variables in optimized code.
At the same time it disables the eager generation of deoptimization support data
in the full code generator (originally introduced in
r10040). This speeds up initial compilation and saves
memory for functions that won't be optimized. It requires
recompiling the function with deoptimization
support when we decide to optimize it.
Review URL: https://chromiumcodereview.appspot.com/9187005
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10700 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Loosen the requirement for Map equivalency on several map checks, including checks up the prototype chain, that are not sensitive to ElementsKinds. These selected map checks should also match against FAST_DOUBLE_ELEMENT and FAST_ELEMENT transitions of the original map. This specifically helps all variants of transitioned JSArrays to still efficiently call builtins like push, pop and sort.
BUG=none
TEST=none
Committed: http://code.google.com/p/v8/source/detail?r=10331
Review URL: http://codereview.chromium.org/9015020
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10356 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Loosen the requirement for Map equivalency on several map checks, including checks up the prototype chain, that are not sensitive to ElementsKinds. These selected map checks should also match against FAST_DOUBLE_ELEMENT and FAST_ELEMENT transitions of the original map. This specifically helps all variants of transitioned JSArrays to still efficiently call builtins like push, pop and sort.
BUG=none
TEST=none
Review URL: http://codereview.chromium.org/9015020
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10331 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This CL adds support for loading from and storing to context slots
belonging to harmony let or const bound variables. Checks for the
hole value are performed and the function is deoptimized if they fail.
The full-codegen generated code will take care of properly throwing
a reference error in these cases.
TEST=mjsunit/harmony/block-let-crankshaft.js
Review URL: http://codereview.chromium.org/8820015
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10220 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
So far we had two types of stack checks: one used for function entries
and one used at loop back edges which uses a deferred code object to
avoid spilling of registers in the loop.
After refactoring lazy deoptimization the first stack check can also
use deferred code. This change removes the first type of stack check
instruction in Crankshaft and uses a deferred stack check in all
places.
Review URL: http://codereview.chromium.org/8775002
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10118 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This shaves 416+ KB, just under 1% off the size of the debug d8 executable
on Linux (mostly because the CheckHelper functions for assertions were
getting separate copies for each compilation unit). The difference in
release builds is negligible---a size reduction of 0.1%.
Also, change namespace-level 'static const' variables to remove the static
storage class as it's the default.
R=danno@chromium.org
BUG=
TEST=
Review URL: http://codereview.chromium.org/8680013
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10083 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This CL introduces a third mode next to the non-strict
(henceforth called 'classic mode') and 'strict mode'
which is called 'extended mode' as in the current
ES.next specification drafts. The extended mode is based on
the 'strict mode' and adds new functionality to it. This
means that most of the semantics of these two modes
coincide.
The 'extended mode' is entered instead of the 'strict mode'
during parsing when using the 'strict mode' directive
"use strict" and when the the harmony-scoping flag is
active. This should be changed once it is fully specified how the 'extended mode' is entered.
This change introduces a new 3 valued enum LanguageMode
(see globals.h) corresponding to the modes which is mostly
used by the frontend code. This includes the following
components:
* (Pre)Parser
* Compiler
* SharedFunctionInfo, Scope and ScopeInfo
* runtime functions: StoreContextSlot,
ResolvePossiblyDirectEval, InitializeVarGlobal,
DeclareGlobals
The old enum StrictModeFlag is still used in the backend
when the distinction between the 'strict mode' and the 'extended mode' does not matter. This includes:
* SetProperty runtime function, Delete builtin
* StoreIC and KeyedStoreIC
* StubCache
Review URL: http://codereview.chromium.org/8417035
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10062 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This generates optimized code for deep-copying of nested object literal
boilerplates which are statically known. Most of the boilerplates have
already been generated at crankshaft time, so this optimization should
kick in for virtually every object literal. Only nested object literal
graphs up to a certain depth and containing up to a certain total number
of properties are considered for this optimization. This will prevent
explosion of code size due to large object literals (e.g. eval on JSON).
Improves splay performance because object literals are created often.
R=fschneider@chromium.org
Review URL: http://codereview.chromium.org/8640001
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10061 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Changes the way we do lazy deoptimization:
1. For side-effect instructions, we insert the lazy-deopt call at
the following LLazyBailout instruction.
CALL
GAP
LAZY-BAILOUT ==> lazy-deopt-call
2. For other instructions (StackCheck) we insert it right after the
instruction since the deopt targets an earlier deoptimization environment.
STACK-CHECK
GAP ==> lazy-deopt-call
The pc of the lazy-deopt call that will be patched in is recorded in the
deoptimization input data. Each Lithium instruction can have 0..n safepoints.
All safepoints get the deoptimization index of the associated LAZY-BAILOUT
instruction. On lazy deoptimization we use the return-pc to find the safepoint.
The safepoint tells us the deoptimization index, which in turn finds us the
PC where to insert the lazy-deopt-call.
Additional changes:
* RegExpLiteral marked it as having side-effects so that it
gets an explicitlazy-bailout instruction (instead of
treating it specially like stack-checks)
* Enable target recording CallFunctionStub to achieve
more inlining on optimized code.
BUG=v8:1789
TEST=jslint and uglify run without crashing, mjsunit/compiler/regress-lazy-deopt.js
Review URL: http://codereview.chromium.org/8492004
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10006 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
