The debugger can be entered from the deferred stack check in optimized code. This can cause both lazy deoptimization and debugger deoptimization (setting the first break point and inspecting the stack for optimized code respectively). This required deoptimization support from the deferred stack check.
The lazy deoptimiztion call is inserted when the deferred code is done including restoring the registers. The bailout to the full code is the begining of the loop body as that is where the stack check is sitting in the optimized code. The bailout is not to the stack check in the full code as that is sitting at the end of the loop.
R=kmillikin@chromium.org
BUG=none
TEST=none
Review URL: http://codereview.chromium.org//7212025
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@8535 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Thread class was receiving an isolate parameter by default.
This approact violates the assumption that only VM threads
can have an associated isolate, and can lead to troubles,
because accessing the same isolate from different threads
leads to race conditions.
This was found by investigating mysterious failures of the
CPU profiler layout test on Linux Chromium. As almost all
threads were associated with some isolate, the sampler was
trying to sample them.
As a side effect, we have also fixed the DebuggerAgent test.
Thanks to Vitaly for help in fixing isolates handling!
R=vitalyr@chromium.org
BUG=none
TEST=none
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@8259 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Strict mode assignment to undefined reference.
Simple assignments (x = <value>) use CODE_TARGET_CONTEXT.
StoreIC stores its own strictness in extra_ic_state.
The strcitness is propagated as further ic stubs are generated.
Details:
* ReferenceError on assignment to non-resolvable reference in strict mode.
* Fix es5conform test expectation file.
* Add es5conform test suite into .gitignore.
* Fix Xcode project.
* Change implemented in virtual frame code generator, as well as full-codegen
for all architectures.
* Fix debugger test.
* Fix comment for CODE_TARGET_CONTEXT
* Implement remaining StoreIC stubs to be strict mode aware.
* Trace extra_ic_state() for ic code stubs.
Code Review URL: http://codereview.chromium.org/6474026/
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6760 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Strict mode assignment to undefined reference.
Simple assignments (x = <value>) use CODE_TARGET_CONTEXT.
StoreIC stores its own strictness in extra_ic_state.
The strcitness is propagated as further ic stubs are generated.
Details:
* ReferenceError on assignment to non-resolvable reference in strict mode.
* Fix es5conform test expectation file.
* Add es5conform test suite into .gitignore.
* Fix Xcode project.
* Change implemented in virtual frame code generator, as well as full-codegen
for all architectures.
* Fix debugger test.
* Fix comment for CODE_TARGET_CONTEXT
* Implement remaining StoreIC stubs to be strict mode aware.
* Trace extra_ic_state() for ic code stubs.
Code Review URL: http://codereview.chromium.org/6474026/
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6756 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
1. Added gdb style debugger commands (and their shortcuts) for d8.
These include:
- s[tep] : step into the current statement.
- s[tep]i[n]: step into the current statement with the minimum step.
- n[ext] : step to the next statement.
- fin[ish] : step out of the current function.
- cond : setting conditions on breakpoints.
- d[elete] : deletes breakpoints.
- en[able]|dis[able]: enables/disables breakpoints including
exception breakpoints.
- ignore : ignores a breakpoint for a specified period.
- inf[o] ar[gs] : info on arguments of the current function.
- inf[o] lo[cals] : info on local vars of the current function.
- inf[o] br[eakpoints] : info on breakpoints.
- l[ist] : similar to source, but allows the user to continually
dump subsequent lines of source code either in the
forward or backward direction.
- quit / exit / disconnect : terminates the remote debugger
session.
NOTE: Active breakpoints will automatically be disabled when
the remote debugger detaches. This allows v8 to continue to
run without worrying about a loss of a debugger session.
2. Added support for breaking the debugger by simply typing ENTER.
The break command is now optional.
3. Once the debugger is broken, the user can now just type ENTER
to repeat the last command. This is useful to functionality that
needs to be invoked repeatedly e.g. step, list.
4. Added more verbose descriptions in d8's help.
5. Fixed a line and column number offset bug in the listing of breakpoint
line and column numbers.
6. Added a gc command to allow GCs to be requested from the debugger
interface. The plumbing for requesting different types of GCs is
there, but the underlying implementation currently only triggers a
full mark-compact GC. The command also returns the before and after
sizes of the heap.
7. Added trace json, and flags commands that are not published in help.
trace json is used for tracing the debugger packets send from and
received by d8. flags is for setting v8 flags. These are useful for
people debugging v8 itself, but not necessarily users of v8.
8. Added the ability to enable and disable break on all / uncaught
exceptions in to d8.
9. Added a fix to prevent the Debugger Agent from being re-instantiated
if one already exists.
10. Added the ability to filter results of the script command by matching
text or numbers on the results.
11. Added v8 flags to enable/disable the sending of debugger BeforeCompile,
AfterCompile, and ScriptCollected events.
12. Fixed some undefined value bugs that resulted in v8 or the debugger
failing.
13. Added a few minor WEBOS__ customizations (analogous to ANDROID
customizations).
Patch by Mark Lam from Hewlett-Packard Development Company, LP
Review URL: http://codereview.chromium.org/5980006
Review URL: http://codereview.chromium.org/6086010
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@6200 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The live registers are now only stored to the expression stack with the non pointer values being stored as smis (on the 32-bit platforms these values are assumed to be 31-bit max).
This makes the CEntryStub entry/exit code much simpler, and there is no longer any need for a mode (debug or normal) on it.
Fix a missing live register when breaking at ARM keyed load.
Review URL: http://codereview.chromium.org/3141047
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@5358 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
When removing debug_info from SharedFunctionInfo, clear all breakpoints associated with that debug_info.
This is needed because function will live in heap until next gc, and therefore can be found
by Runtime::FindSharedFunctionInfoInScript.
Review URL: http://codereview.chromium.org/2848032
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4997 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This changes the way the constants kJSObjectType, kFirstNonstringType and kProxyType are made available to the inlined part of the V8 API. This change to fixed constants resolves linker this linker error Windows
error LNK2001: unresolved external symbol "public: static int v8::internal::Internals::kJSObjectType" (?kJSObjectType@Internals@internal@v8@@2HA)
when linking against a V8 DLL.
This change also makes it possible to build all the C++ tests with ENABLE_DEBUGGER_SUPPORT not defined. Now C++ tests run ENABLE_DEBUGGER_SUPPORT not defined, and only the JavaScript tests which tests the debugger fails when ENABLE_DEBUGGER_SUPPORT is not defined.
Review URL: http://codereview.chromium.org/2820016
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4898 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Added support for more precise break points when debugging and stepping. To achieve that additional nop instructions are inserted where breaking would otherwise be impossible. The number of nop instructions inserted are sufficient to make place for patching with a call to a debug break code stub. On Intel that is 5 nop's for 32-bit and 13 for 64-bit. Om ARM 3 nop instructions (12 bytes) are required.
In order to avoid inserting nop's in to many places a simple ast checker have been added to check whether there are breakable code in a statement or expression. If it is possible to break in an expression no additional break enabeling code is inserted.
Added break locations to the true and false part of a conditional expression.
Added stepping tests to cover more constructs.
These changes are only in the full compiler.
Changed the default value for the option --debugger in teh d8 shell from true to false. The reason for this is that with --debugger turned on the full compiler will be used for all code in when running d8, which can be unexpeceted.
Review URL: http://codereview.chromium.org/2693002
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4820 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Eventually named property query callbacks will return attributes
(as an integer) or an empty handle if property is not intercepted.
To gradually migrate to this new API, USE_NEW_QUERY_CALLBACK
macro would control if old or new style API is used.
So the migration plan is:
1) introduce new API which should be explictily enabled;
2) switch to new API defining USE_NEW_QUERY_CALLBACK before
include of <v8.h> (that would require changes to client code as well)
3) remove old API from v8
4) remove #define USE_NEW_QUERY_CALLBACK from clients.
Review URL: http://codereview.chromium.org/2576003
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4797 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
1) Exposes Local<Context> v8::Debug::GetDebugContext().
Rationale: We can already get debugger context instance using various workarounds,
so exposing it explicitly in the API only makes things more clear.
2) Removes debugger.HasJavaScriptFrames() requirement for entering debugger context.
Rationale: Sometimes we'd like to call into debugger from the external native code.
3) Makes Debugger v8::Debug::Call execute on debugger context's global object.
Rationale: This is somewhat arguable, but temporary measure. We've agreed that we
should introduce a DebugAPI object that would expose necessary API in the debug-delay.
The problem is that it would take some time to define this API and it is not really
convenient to do that on the v8 land given the difference in v8 / host lifecycle.
The plan is to compose this API as a Debug.* wrapper outside v8 by means of exposing
debugger context's global object here, and once API settles down, upstream it to v8 and
start making Debug::Calls on this new DebugAPI object instead.
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4251 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Storing a JSArray in the Script object could cause an indirect reference from the compilation cache to a global object to be created. Now the line ends are only stored as a FixedArrya and when that is needed in JavaScript a JSArray copy is created. Changed some of the JavaScript code to cache the line ends in a local variable for better performance.
BUG=http://code.google.com/p/v8/issues/detail?id=528
TEST=test/test-api/Bug528
Review URL: http://codereview.chromium.org/434117
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3374 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
A callback on the debugger thread when a message is received. Allows the
embedding application to wake up the main thread in order to handle the
message. Useful when the embedding application is idle and sitting in a
select() call.
Patch by Ryan Dahl <coldredlemur@gmail.com>
Review URL: http://codereview.chromium.org/395013
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3326 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
In the generated code for function.apply there was a loop checking the stack limit for interruption. This loop would call into the runtime system to handle interuption and keep running until there was no interruption. However if the interuption was debug break the runtime system would never clear the interruption as debug break is prevented in builtins are prevented and the assumption here was that returning with the debug break flag set would move execution forward.
Renamed initial_jslimit and initial_climit to real_jslimit and real_climit. Renamed a few external references related to the stack limit as well.
Exposed the real stack limit to generated code to make the stack check when entering function.apply use the real stack limit and not the stack limit which is changed to signal interruption.
Added the real stack limit to the roots array.
BUG=http://code.google.com/p/v8/issues/detail?id=493
TEST=cctest/test-debug/DebugBreakFunctionApply
Review URL: http://codereview.chromium.org/345048
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3229 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
of individual changes:
- Added infrastructure for custom stub caching.
- Push the code object onto the stack in exit calls instead of a
debug/non-debug marker.
- Remove the DEBUG_EXIT frame type.
- Add a new exit stub generator for API getters.
Review URL: http://codereview.chromium.org/330017
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3130 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The main piece of this change was to add support for break on return for ARM. On ARM the normal js function return consist of the following code sequence.
mov sp, fp
ldmia sp!, {fp, lr}
add sp, sp, #4
bx lr
to a call to the debug break return entry code using the following code sequence
mov lr, pc
ldr pc, [pc, #-4]
<debug break return entry code entry point address>
bktp 0
The values of Assembler::kPatchReturnSequenceLength and Assembler::kPatchReturnSequenceLength are somewhat misleading, but they fit the current use in the debugger. Also Assembler::kPatchReturnSequenceLength is used in the IC code as well (for something which is not related to return sequences at all). I will change that in a separate changelist.
For the debugger to work also added recording of the return sequence in the relocation info and handling of source position recording when a function ends with a return statement.
Used the constant kInstrSize instead of sizeof(Instr).
Passes all debugger tests on both simulator and hardware (only release mode tested on hardware).
Review URL: http://codereview.chromium.org/199075
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2879 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
