This change introduces register re-mapping to avoid assignment hazards
in binary expressions. Expressions that cause problems typically have
the form y = x + (x = 4);. The problem occurs because the lhs value
evaluates to the register holding x. The rhs updates that register and
then applying the operation would use the new value as the lhs.
By tracking loads and stores in binary expressions the generator is now
able to detect when condition occurs and uses a temporary register for
the rhs value. When the binary expression evaluation is complete the
variable is updated with the latest temporary.
A new bytecode Mov performs this update without touching the
accumulator.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1412683011
Cr-Commit-Position: refs/heads/master@{#32141}
Adds support for visiting the Call bytecode to the bytecode graph builder.
This change also adds the call type feedback slot to the Call bytecode.
This is not currently used by the interpreter, but is used by the
graph builder.
Also adds a CallWide varient of the Call bytecode, and adds the kCount16
operand type.
Landed on behalf of rmcilroy.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1456453002
Cr-Commit-Position: refs/heads/master@{#32033}
Adds a test that the receiver for sloppy mode functions is replaced with
the global proxy when called with an undefined receiever.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1410113008
Cr-Commit-Position: refs/heads/master@{#31854}
Corrects LdaGlobal to deal with TypeofMode::INSIDE_TYPEOF so that it
doesn't throw a reference error on undefined globals.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1422443006
Cr-Commit-Position: refs/heads/master@{#31757}
Existing code was assuming that 'lexical' blocks were the same as basic
blocks, therefore code which emitted jumps within a lexical block (e.g.,
logical or) would in some occassions incorrectly omit a necessary
ToBoolean.
This change removes Enter/LeaveBlock from BytecodeArrayBuilder and
instead tracks basic blocks via label bindings and jump operations. The
change also ensures we don't emit dead code at the end of a basic block,
and adds tests of the edge cases.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1406983010
Cr-Commit-Position: refs/heads/master@{#31741}
Adds an optimization to not emit unnecessary jumps and dead code in If,
For, While, and do-while statments. When the value of condition is known
at compile time, the code is emitted only for the paths that can be taken.
For example, when the condition is known to be true in an if statmenet
only then block is generated.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1414193006
Cr-Commit-Position: refs/heads/master@{#31715}
Adds an optimization to emit JumpIfToBooleanTrue/False instead
of ToBoolean followed by JumpIfTrue/False if the value in the
accumulator is not boolean.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1426913002
Cr-Commit-Position: refs/heads/master@{#31697}
Adds support for switch statments to the interpreter.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1415093006
Cr-Commit-Position: refs/heads/master@{#31687}
This moves the cctest file for the interpreter to live in the same
namespace as the components it is testing. Hence we can avoid the
forbidden using directives pulling in entire namespaces.
From the Google C++ style guide: "You may not use a using-directive to
make all names from a namespace available". This would be covered by
presubmit linter checks if build/namespaces were not blacklisted.
R=rmcilroy@chromium.org
Review URL: https://codereview.chromium.org/1410993009
Cr-Commit-Position: refs/heads/master@{#31681}
For..in introduces 3 new bytecodes ForInPrepare, ForInNext, and
ForInDone to start a for..in loop, get the next element, and check if
the loop is done.
For..in builds upon new LoopBuilder constructs for conditionally
breaking and continuing during iteration: BreakIf{Null|Undefined}
and ContinueIf{Null|Undefined}. New conditional jump bytecodes
support this succinctly: JumpIfNull and JumpIfUndefined.
Add missing check to BytecodeLabel that could allow multiple
forward referencess to the same label which is not supported.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1422033002
Cr-Commit-Position: refs/heads/master@{#31651}
Adds support for delete operator, it's implementation and tests.
Adds tests for the following unary operators
-BitwiseNot
-Add
-Sub
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1410953003
Cr-Commit-Position: refs/heads/master@{#31620}
Adds support for loading from and storing to outer context
variables. Also adds support for declaring functions on contexts and
locals. Finally, fixes a couple of issues with StaContextSlot where
we weren't emitting the write barrier and therefore would crash in the
GC.
Also added code so that --print-bytecode will output the
function name before the bytecodes, and replaces MachineType with StoreRepresentation in RawMachineAssembler::Store and updates tests.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1425633002
Cr-Commit-Position: refs/heads/master@{#31584}
Adds support and tests for conditional (ternary) expressions.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1417053004
Cr-Commit-Position: refs/heads/master@{#31575}
Fills out some more of the function prologue support in the
interpreter. Deals with creation of arguments objects and throwing
IllegalRedeclarations if necessary. Also adds (untested) support for
this.function and new.target variable assignment.
Also fixes a bug in Frames::is_java_script() to deal with
interpreter frames correctly.
Cleans up comments in builtins InterpreterEntryTrampoline about
missing prologue support.
Adds the following bytecodes:
- CreateArgumentsSloppy
- CreateArgumentsStrict
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1412953007
Cr-Commit-Position: refs/heads/master@{#31486}
Adds support for compound expressions for variables and named / keyed
property assignments.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1420503002
Cr-Commit-Position: refs/heads/master@{#31485}
Adds support for count operations to the interpreter. Deals with count
operations on locals, globals, context allocated variables and named and
keyed properties.
Adds the following bytecodes:
ToNumber
Inc
Dec
BUG=v8:4280
LOG=N
TBR=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1416623003
Cr-Commit-Position: refs/heads/master@{#31484}
Unifies the global and unallocated variable type accesses given that
--global_var_shortcuts is going away. Lda/StaGlobal is modified to use
Load/StoreICs on the global object. The named LoadIC and StoreIC bytecodes
are also modified so that they take a constant pool entry index for the
name rather than a register, avoiding unecessary LdaConstant bytecodes to
be emitted.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1419003002
Cr-Commit-Position: refs/heads/master@{#31482}
Adds support for local context loads and stores. Also adds support for
creation of new block contexts (e.g., for let variables) and initializing
const / let variables with the hole appropriately.
Also adds some checks to ensure BytecodeArrayBuilder::context_count is set
appropriately and fixes tests to do so.
Adds the bytecode StaContextSlot.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1403943004
Cr-Commit-Position: refs/heads/master@{#31343}
This change add a new bytecode for operator new and implements it using
the Construct() builtin.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1402943002
Cr-Commit-Position: refs/heads/master@{#31293}
Adds support for following operators
-Logical and
-Logical or
-Comma
Adds the above bytecodes, support to BytecodeGenerator and BytecodeArrayBuilder
to enable it's use, it's implementation and tests.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1399773002
Cr-Commit-Position: refs/heads/master@{#31281}
Adds Object literal support to the interpreter. Adds the following bytecodes:
- ToName
- CreateObjectLiteral.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1386313005
Cr-Commit-Position: refs/heads/master@{#31253}
Adds array literal support to the interpreter. Currently constructed
array elements don't have type feedback slots, so also adds support for
generic keyed store operations.
Adds the following bytecodes:
- CreateArrayLiteral
- KeyedStoreICGeneric
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1400753003
Cr-Commit-Position: refs/heads/master@{#31240}
Adds function literal support and add support for OTHER_CALLS which can be
made when calling a function literal.
Adds the CreateClosure bytecode.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1396693003
Cr-Commit-Position: refs/heads/master@{#31231}
-Bitwise Or
-Bitwise Xor
-Bitwise And
Adds the above bytecodes, support to BytecodeGenerator and BytecodeArrayBuilder to enable it's use, it's implementation and tests.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1386133002
Cr-Commit-Position: refs/heads/master@{#31210}
Adds support for following operators
-Shift left
-Shift right
-Shift right logical
Adds the above bytecodes, support to BytecodeGenerator and BytecodeArrayBuilder
to enable it's use, it's implementation and tests.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1392913002
Cr-Commit-Position: refs/heads/master@{#31205}
Implements support for declaring global variables. Also adds support for loading
from and storing to both global and unallocated global variables. Adds the
following bytecodes:
- StoreGlobal
- LoadContextSlot
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1378523005
Cr-Commit-Position: refs/heads/master@{#31166}
Thus TypeFeedbackMetadata can now be shared between different native contexts.
Review URL: https://codereview.chromium.org/1384673002
Cr-Commit-Position: refs/heads/master@{#31143}
Adds support for strict mode load / store ICs and cleans up BinaryOp and
CompareOp to only trigger an UNIMPLEMENTED abort if called with STRONG
mode (which is the only language mode which has different compare/binary ops.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1385623002
Cr-Commit-Position: refs/heads/master@{#31134}
Implementations and tests for typeof, void, and logical not.
Add missing string type to Object::TypeOf.
BUG=v8:4280
LOG=NO
Review URL: https://codereview.chromium.org/1390483002
Cr-Commit-Position: refs/heads/master@{#31124}
Adds support for calling runtime functions from the interpreter. Adds the
CallRuntime bytecode which takes a Runtime::FunctionId of the function to call
and the arguments in sequential registers. Adds a InterpreterCEntry builtin
to enable the interpreter to enter C++ code based on the functionId.
Also renames Builtin::PushArgsAndCall to Builtin::InterpreterPushArgsAndCall
and groups all the interpreter builtins together.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1362383002
Cr-Commit-Position: refs/heads/master@{#31089}
Reason for revert:
Now breaking arm32 debug bot (worked locally even with --debug-code, so I'll need to figure out what's different on the bot)
Original issue's description:
> [Interpreter] Add CallRuntime support to the interpreter.
>
> Adds support for calling runtime functions from the interpreter. Adds the
> CallRuntime bytecode which takes a Runtime::FunctionId of the function to call
> and the arguments in sequential registers. Adds a InterpreterCEntry builtin
> to enable the interpreter to enter C++ code based on the functionId.
>
> Also renames Builtin::PushArgsAndCall to Builtin::InterpreterPushArgsAndCall
> and groups all the interpreter builtins together.
>
> BUG=v8:4280
> LOG=N
>
TBR=bmeurer@chromium.org,oth@chromium.org,mstarzinger@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280
Review URL: https://codereview.chromium.org/1379933003
Cr-Commit-Position: refs/heads/master@{#31078}
Adds support for calling runtime functions from the interpreter. Adds the
CallRuntime bytecode which takes a Runtime::FunctionId of the function to call
and the arguments in sequential registers. Adds a InterpreterCEntry builtin
to enable the interpreter to enter C++ code based on the functionId.
Also renames Builtin::PushArgsAndCall to Builtin::InterpreterPushArgsAndCall
and groups all the interpreter builtins together.
BUG=v8:4280
LOG=N
Committed: https://crrev.com/40e8424b744f8b6e3e1d93e20f23487419911dfc
Cr-Commit-Position: refs/heads/master@{#31064}
Review URL: https://codereview.chromium.org/1362383002
Cr-Commit-Position: refs/heads/master@{#31076}
Reason for revert:
Broke Arm64 bot (CEntry stub is trying to pop arguments off stack when argv_in_reg, so I need to fix this).
Original issue's description:
> [Interpreter] Add CallRuntime support to the interpreter.
>
> Adds support for calling runtime functions from the interpreter. Adds the
> CallRuntime bytecode which takes a Runtime::FunctionId of the function to call
> and the arguments in sequential registers. Adds a InterpreterCEntry builtin
> to enable the interpreter to enter C++ code based on the functionId.
>
> Also renames Builtin::PushArgsAndCall to Builtin::InterpreterPushArgsAndCall
> and groups all the interpreter builtins together.
>
> BUG=v8:4280
> LOG=N
>
> Committed: https://crrev.com/40e8424b744f8b6e3e1d93e20f23487419911dfc
> Cr-Commit-Position: refs/heads/master@{#31064}
TBR=bmeurer@chromium.org,oth@chromium.org,mstarzinger@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280
Review URL: https://codereview.chromium.org/1387543002
Cr-Commit-Position: refs/heads/master@{#31066}
Adds support for calling runtime functions from the interpreter. Adds the
CallRuntime bytecode which takes a Runtime::FunctionId of the function to call
and the arguments in sequential registers. Adds a InterpreterCEntry builtin
to enable the interpreter to enter C++ code based on the functionId.
Also renames Builtin::PushArgsAndCall to Builtin::InterpreterPushArgsAndCall
and groups all the interpreter builtins together.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1362383002
Cr-Commit-Position: refs/heads/master@{#31064}
This CL also allows to use arbitrary number of feedback vector elements for particular slot kind.
Review URL: https://codereview.chromium.org/1370303004
Cr-Commit-Position: refs/heads/master@{#31050}
The comparison operators and ToBoolean are implemented by calling into
the runtime. There are new runtime methods are prefixed with Interpreter
to make use case clear.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1369123002
Cr-Commit-Position: refs/heads/master@{#30983}
This is a second step towards merging FeedbackVectorSlot and FeedbackVectorICSlot.
Review URL: https://codereview.chromium.org/1376443002
Cr-Commit-Position: refs/heads/master@{#30971}
This is a first step towards merging FeedbackVectorSlot and FeedbackVectorICSlot.
Review URL: https://codereview.chromium.org/1369973002
Cr-Commit-Position: refs/heads/master@{#30964}
