cpplint rules change over time, and we change the exact rules we enable
for v8. This CL removes NOLINT annotations which are not needed
according to the currently enabled rules.
R=ahaas@chromium.org
Bug: v8:11717
Change-Id: Ica92f4ddc9c351c1c63147cbcf050086ca26cc07
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2859854
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74297}
Scopes in V8 are used to guarantee one or more properties during its
lifetimes. If a scope is not named e.g MyClassScope(args) instead of
MyClassScope scope(args) it will get created and automatically destroyed
and therefore, being useless as a scope. This CL would produce a
compiling warning when that happens to ward off this developer error.
Follow-up to ccrev.com/2552415 in which it was introduced and
implemented for Guard classes.
Change-Id: Ifa0fb89cc3d9bdcdee0fd8150a2618af5ef45cbf
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2555001
Commit-Queue: Santiago Aboy Solanes <solanes@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#71425}
Remove the runtime functionality allowing the Isolate to be allocated
4GB aligned in non-pointer-compressed builds. This was barely used in
tests, so we can remove it to give slightly stronger compile-time
guarantees about pointer-compression-only methods being used only under
pointer-compression.
Change-Id: I8eb990faa8f8499ecdcb70ca104ffad4be1437b2
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2442790
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#70262}
... that controls whether the TF graph zones should support compression.
Bug: v8:9923
Change-Id: Ifbe237b75e9c92e62eb32b69d6b3b1a818269b83
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2308347
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Reviewed-by: Ross McIlroy <rmcilroy@chromium.org>
Cr-Commit-Position: refs/heads/master@{#69036}
Change the unittests Isolate mixin to create one Isolate per test,
rather than one per test suite. We usually run these tests independently
in separate processes anyway, so this shouldn't affect normal test
execution, but it will avoid Isolate state leaking across tests when
running the unittests binary directly.
Take this opportunity to also clean up the mixins, changing counter
initialization and forcing pointer compression into template traits.
Bug: v8:10142
Change-Id: If92046f9c6f2056252d099faed04d97844ef7319
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2143818
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Auto-Submit: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67110}
String::NewFromLiteral is a templated function that takes a char[N]
argument that can be used as an alternative to String::NewFromUtf8 and
returns a Local<String> rather than a MaybeLocal<String> reducing the
number of ToLocalChecked() or other checks.
Since the string length is known at compile time, it can statically
assert that the length is less than String::kMaxLength, which means that
it can never fail at runtime.
This also converts all found uses of NewFromUtf8 taking a string literal
or a variable initialized from a string literal to use the new API. In
some cases the types of stored string literals are changed from const
char* to const char[] to ensure the size is retained.
This API does introduce a small difference compared to NewFromUtf8. For
a case like "abc\0def", NewFromUtf8 (using length -1 to infer length)
would treat this as a 3 character string, whereas the new API will treat
it as a 7 character string.
As a drive-by fix, this also fixes all redundant uses of
v8::NewStringType::kNormal when passed to any of the String::New*
functions.
Change-Id: Id96a44bc068d9c4eaa634aea688e024675a0e5b3
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2089935
Commit-Queue: Dan Elphick <delphick@chromium.org>
Reviewed-by: Mathias Bynens <mathias@chromium.org>
Reviewed-by: Mythri Alle <mythria@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#66622}
This replaces all typedefs that define types and not functions by the
equivalent "using" declaration.
This was done mostly automatically using this command:
ag -l '\btypedef\b' src test | xargs -L1 \
perl -i -p0e 's/typedef ([^*;{}]+) (\w+);/using \2 = \1;/sg'
Patchset 2 then adds some manual changes for typedefs for pointer types,
where the regular expression did not match.
R=mstarzinger@chromium.orgTBR=yangguo@chromium.org, jarin@chromium.org
Bug: v8:9183
Change-Id: I6f6ee28d1793b7ac34a58f980b94babc21874b78
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1631409
Commit-Queue: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Michael Starzinger <mstarzinger@chromium.org>
Cr-Commit-Position: refs/heads/master@{#61849}
This is a reland of 93716b9e71
Original change's description:
> [snapshot] Add support for native counters.
>
> Counters in generated code, as enabled with --native-code-counters, do not work
> in the snapshot. This adds a `v8_enable_snapshot_code_counters` build option
> enabled by defaut in debug mode that allows code from the snapshot to increment
> the current isolate's set of counters.
>
> For this to work, we need to add native code counters in the external reference
> table.
>
> To keep the no snapshot configuration similar, we've also enabled the
> --native-code-counters flag by default for debug builds.
>
> Change-Id: I4478b79858c9b04f57e06e7ec67449e9e3a76f53
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1528998
> Commit-Queue: Pierre Langlois <pierre.langlois@arm.com>
> Reviewed-by: Peter Marshall <petermarshall@chromium.org>
> Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#60495}
Change-Id: Ib6427caf068ca196a032e3f3b97d9f9219e0fe60
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1543349
Reviewed-by: Peter Marshall <petermarshall@chromium.org>
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Commit-Queue: Pierre Langlois <pierre.langlois@arm.com>
Cr-Commit-Position: refs/heads/master@{#60507}
This reverts commit 93716b9e71.
Reason for revert: Breaks asan debug:
https://ci.chromium.org/p/v8/builders/ci/V8%20Clusterfuzz%20Mac64%20ASAN%20-%20debug%20builder/7872https://ci.chromium.org/p/v8/builders/ci/V8%20Clusterfuzz%20Linux64%20ASAN%20-%20debug%20builder/7874
Original change's description:
> [snapshot] Add support for native counters.
>
> Counters in generated code, as enabled with --native-code-counters, do not work
> in the snapshot. This adds a `v8_enable_snapshot_code_counters` build option
> enabled by defaut in debug mode that allows code from the snapshot to increment
> the current isolate's set of counters.
>
> For this to work, we need to add native code counters in the external reference
> table.
>
> To keep the no snapshot configuration similar, we've also enabled the
> --native-code-counters flag by default for debug builds.
>
> Change-Id: I4478b79858c9b04f57e06e7ec67449e9e3a76f53
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1528998
> Commit-Queue: Pierre Langlois <pierre.langlois@arm.com>
> Reviewed-by: Peter Marshall <petermarshall@chromium.org>
> Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#60495}
TBR=sigurds@chromium.org,jgruber@chromium.org,petermarshall@chromium.org,pierre.langlois@arm.com
Change-Id: I93f1ed714e3dcd309f3100685e4bd282db471d46
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1543209
Reviewed-by: Michael Achenbach <machenbach@chromium.org>
Commit-Queue: Michael Achenbach <machenbach@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60500}
Counters in generated code, as enabled with --native-code-counters, do not work
in the snapshot. This adds a `v8_enable_snapshot_code_counters` build option
enabled by defaut in debug mode that allows code from the snapshot to increment
the current isolate's set of counters.
For this to work, we need to add native code counters in the external reference
table.
To keep the no snapshot configuration similar, we've also enabled the
--native-code-counters flag by default for debug builds.
Change-Id: I4478b79858c9b04f57e06e7ec67449e9e3a76f53
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1528998
Commit-Queue: Pierre Langlois <pierre.langlois@arm.com>
Reviewed-by: Peter Marshall <petermarshall@chromium.org>
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60495}
SaveFlags previously worked by re-setting the flags using the command
line. Unfortunately, this could reset flags being used by concurrent
processes, which would cause TSAN issues.
Now, SaveFlags stores a copy of the state of all flags on creation, and
only resets changed flags in its destructor. It does this by (ab)using
the flag-definitions.h pseudo-header, adding a new mode to that header
which applies an includer-defined macro to each flag definition.
Change-Id: I4c156ecb36b4b7c05402138088266465d31e33b6
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1530809
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#60350}
MicrotaskQueueTest uses Isolate's default_microtask_queue for testing,
however the instance is shared between test cases, and causes flaky
failure of MicrotaskQueueTest.BufferGrowth.
This CL adds a MicrotaskQueue instance for each test fixture, so that
each test cases use separate ones.
Also, this CL removes the DCHECK that denies non-default MicrotaskQueue
to run, which is unneeded after https://crrev.com/c/1369906.
Bug: v8:8124
Change-Id: I4ff236c327bf0be14f582b3ca8c802fd72661b42
Reviewed-on: https://chromium-review.googlesource.com/c/1417315
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Taiju Tsuiki <tzik@chromium.org>
Cr-Commit-Position: refs/heads/master@{#58901}
The two names refer to the same thing by now, so this patch is
entirely mechanical.
Bug: v8:3770
Change-Id: Ia360c06c89af6b3da27fd21bbcaeb2bdaa28ce22
Reviewed-on: https://chromium-review.googlesource.com/c/1397705
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#58615}
Explicitly disallow implicit casting of ObjectPtr to bool to match
clang's and MSVC's behavior.
Introduce a few function overloads using ObjectPtr instead of Object*.
Fix printing of ObjectPtr for objects-printer.cc and GTest.
Bug: v8:3770
Change-Id: I3c3580d363ae6d9fe8f743c6151abc11a915f05c
Reviewed-on: https://chromium-review.googlesource.com/c/1351245
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57928}
+ fixing other files which were depending on context-inl.h pulling in the
missing includes.
BUG=v8:7490,v8:8238
Change-Id: I90d37599bdfb69ac8fd7e62b8fb78d9d77c77234
Reviewed-on: https://chromium-review.googlesource.com/c/1349277
Reviewed-by: Clemens Hammacher <clemensh@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Marja Hölttä <marja@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57775}
to control how the memory for Isolate object is allocated.
This is the support for pointer-compression friendly heap layout.
Bug: v8:8182
Cq-Include-Trybots: luci.chromium.try:linux_chromium_rel_ng
Change-Id: Ida36b81ee22bd865005c394748b62d4c0897d746
Reviewed-on: https://chromium-review.googlesource.com/c/1251548
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57131}
and use Mixin pattern with linear inheritance instead. This will
allow to customize the way the Isolate is created.
Bug: v8:8238
Change-Id: Ic611df123653af3a0f2271394387492e440b5ea8
Reviewed-on: https://chromium-review.googlesource.com/c/1306433
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Cr-Commit-Position: refs/heads/master@{#57106}
Refactors the CompilerDispatcher to be able to enqueue eager inner functions
for off-thread compilation during top-level compilation of a script.
Unoptimized compile jobs are simplified to only have two phases - compile
and finalization. Only finalization requires heap access (and therefore
needs to be run on the main thread). The change also introduces a requirement
to register a SFI with a given compile job after that job is posted, this
is due to the fact that an SFI won't necessarily exist at the point the job
is posted, but is created later when top-level compile is being finalized.
Logic in the compile dispatcher is update to deal with the fact that a job
may not be able to progress if it doesn't yet have an associated SFI
registered with it.
BUG=v8:8041
Change-Id: I66cccd626136738304a7cab0e501fc65cf342514
Reviewed-on: https://chromium-review.googlesource.com/1215782
Commit-Queue: Ross McIlroy <rmcilroy@chromium.org>
Reviewed-by: Marja Hölttä <marja@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Cr-Commit-Position: refs/heads/master@{#56088}
This CL adds a very crude unittest to check that RuntimeCallStats work
correctly with api callbacks present. This currently doesn't check that
all parent timers (namely FunctionCallback) are handled properly.
Drive-by-Fix:
- Use Microseconds for all RCS timer tests
- Add TestWithContext::SetGlobalProperty helper
- Use explicit v8:: prefix in test-utils.{h,cc}
Change-Id: I054e78abca0b87a3b9e07d3b06cccdad15403bae
Reviewed-on: https://chromium-review.googlesource.com/766429
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49348}
- Update most callsites to use the new RunJS method
- Update tests to use TestWithNativeContext if possible
- Remove RunJS from test-helpers.cc
- Remove TestWithRandomNumberGenerator from test-utils.h
Change-Id: Ib2a6cc56334dc391ca6a2aeb7780fa324f44f109
Reviewed-on: https://chromium-review.googlesource.com/765373
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#49325}
When running main-thread compiler-dispatcher jobs, ensure that we enter the
correct Context. Also adds a test for compiling an extension in the compiler
dispatcher to ensure that idle tasks enter the correct context before
finalizing the compilation.
BUG=v8:5203
Review-Url: https://codereview.chromium.org/2679193004
Cr-Commit-Position: refs/heads/master@{#43111}
This adds more useful information to the v8-heap-stats tool.
BUG=v8:5489
Review-Url: https://codereview.chromium.org/2394213003
Cr-Commit-Position: refs/heads/master@{#40361}
There were once plans to generate cross-context code with TurboFan,
however that doesn't fit into the model anymore, and so all of this
is essentially dead untested code (and thus most likely already broken
in subtle ways). With this mode still in place it would also be a lot
harder to make inlining based on SharedFunctionInfo work.
BUG=v8:2206,v8:5499
R=jarin@chromium.org
Review-Url: https://codereview.chromium.org/2406803002
Cr-Commit-Position: refs/heads/master@{#40109}
This is some initial cleanup to keep /src clean. The
AccountingAllocator is actually exclusively used by zones and this
common subfolder makes that more clear.
BUG=v8:5409
Review-Url: https://codereview.chromium.org/2344143003
Cr-Commit-Position: refs/heads/master@{#39558}
We expect that the majority of malloc'd memory held by V8 is allocated
in Zone objects. Introduce an Allocator class that is used by Zones to
manage memory, and allows for querying the current usage.
BUG=none
R=titzer@chromium.org,bmeurer@chromium.org,jarin@chromium.org
LOG=n
TBR=rossberg@chromium.org
Review URL: https://codereview.chromium.org/1847543002
Cr-Commit-Position: refs/heads/master@{#35196}
We shouldn't have shared state between isolates by default. The embedder
is free to pass the same allocator to all isolates it creates.
BUG=none
R=dcarney@chromium.org
LOG=y
Review URL: https://codereview.chromium.org/1116633002
Cr-Commit-Position: refs/heads/master@{#28127}
Along the way:
- Thread isolate parameter explicitly through code that used to
rely on getting it from the zone.
- Canonicalize the parameter position of isolate and zone for
affected code
- Change Hydrogen New<> instruction templates to automatically
pass isolate
R=mstarzinger@chromium.org
LOG=N
Review URL: https://codereview.chromium.org/868883002
Cr-Commit-Position: refs/heads/master@{#26252}
