This CL introduces the SyncStreamingDecoder to support
streaming compilation when --single-threaded is set. The
SyncStreamingDecoder buffers all bytes it receives over
{OnBytesReceived}, and compiles them synchronously upon {Finish}.
In addition to introducing SyncStreamingDecoder, this CL does
the following changes:
* Redirect streaming compilation to the new streaming decoder if
--no-wasm-async-compilation is set. This flag is set if
--single-threaded is set.
* Extend the test-streaming-compilation.cc tests to test also the new
streaming decoder.
R=thibaudm@chromium.org
Bug: v8:10548
Change-Id: I807e291a6060067c9835de4adf82bcb00321d995
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2209053
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67955}
Sometimes CSA code carefully constructs a mask to check several
bitfields at once. Thus far, such a check has been very awkward to write
in Torque. This change adds a way to do so, using the
non-short-circuiting binary `&` operator. So now you can write an
expression that depends on several bitfields from a bitfield struct,
like `x.a == 5 & x.b & !x.c & x.d == 2` (assuming b is a one-bit value),
and it will be reduced to a single mask and equality check. To
demonstrate a usage of this new reduction, this change ports the trivial
macro IsSimpleObjectMap to Torque. I manually verified that the
generated code for the builtin SetDataProperties, which uses that macro,
is unchanged.
Bug: v8:7793
Change-Id: I4a23e0005d738a6699ea0f2a63f9fd67b01e7026
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2183276
Commit-Queue: Seth Brenith <seth.brenith@microsoft.com>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67948}
The proposal uses the lane shape, e.g. i64x2.anytrue, and we were using
s1x2.anytrue in our opcodes. This was a legacy naming, because we were
trying to bitpack the booleans. Now that we aren't doing that, rename
these to be more consistent with the proposal.
This was done with a straightforward sed script, changing both cpp code
and also some comments in mjsunit test files.
Bug: v8:10506
Change-Id: If077ed805de23520d8580d6b3b1906c80f67b94f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2207915
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67945}
Currently, if d8 is run with the --turbo-profiling flag, it prints info
about every TurboFan-compiled function. This info includes the number of
times that each basic block in the function was run. It also includes
text representations of the function's schedule and code, so that the
person reading the output can associate counters with blocks of code.
The data about each function is currently stored in a
BasicBlockProfiler::Data instance, which is attached to a list owned by
the singleton BasicBlockProfiler. Each Data contains an
std::vector<uint32_t> which represents how many times each block in the
function has executed. The generated code for each block uses a raw
pointer into the storage of that vector to implement incrementing the
counter.
With this change, if you compile with v8_enable_builtins_profiling and
then run with --turbo-profiling, d8 will print that same info about
builtins too.
In order to generate code that can survive being serialized to a
snapshot and reloaded, this change uses counters in the JS heap instead
of a std::vector outside the JS heap. The steps for instrumentation are
as follows:
1. Between scheduling and instruction selection, add code to increment
the counter for each block. The counters array doesn't yet exist at
this point, and allocation is disallowed, so at this point the code
refers to a special marker value.
2. During finalization of the code, allocate a BasicBlockProfilingData
object on the JS heap containing data equivalent to what is stored in
BasicBlockProfiler::Data. This includes a ByteArray that is big
enough to store the counters for each block.
3. Patch the reference in the BuiltinsConstantsTableBuilder so that
instead of referring to the marker object, it now refers to this
ByteArray. Also add the BasicBlockProfilingData object to a list that
is attached to the heap roots so it can be easily accessed for
printing.
Because these steps include modifying the BuiltinsConstantsTableBuilder,
this procedure is only applicable to builtins. Runtime-generated code
still uses raw pointers into std::vector instances. In order to keep
divergence between these code paths to a minimum, most work is done
referring to instances of BasicBlockProfiler::Data (the C++ class), and
functions are provided to copy back and forth between that type and
BasicBlockProfilingData (the JS heap object).
This change is intended only to make --turbo-profiling work consistently
on more kinds of functions, but with some further work, this data could
form the basis for:
- code coverage info for fuzzers, and/or
- hot-path info for profile-guided optimization.
Bug: v8:10470, v8:9119
Change-Id: Ib556a5bc3abe67cdaa2e3ee62702a2a08b11cb61
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2159738
Commit-Queue: Seth Brenith <seth.brenith@microsoft.com>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67944}
Changes:
- Implement the 'let' opcode, as per
https://github.com/WebAssembly/function-references/blob/master/proposals/function-references/Overview.md#local-bindings
- Use a WasmDecoder in place of a plain decoder in OpcodeLength and
AnalyzeLoopAssignment.
- Change ControlBase to accept an additional 'locals_count' parameter.
- Implement required test infrastructure and write some simple tests.
Bug: v8:7748
Change-Id: I39d60d1f0c26016c8f89c009dc5f4119b0c73c87
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2204107
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67937}
This change updates some Torque-defined classes to include more precise
field types where possible. It also updates those classes to use
@generateCppClass. One field was removed because it's unused
(PrototypeInfo::validity_cell), and two fields in StackFrameInfo
actually became less precise because they're based on Script::name,
which is an embedder-provided untyped Local<Value>. (Automatically
generated accessors pointed out this bug easily.)
This change also includes a couple of minor fixes in Torque.
Change-Id: Ib2bc6c7165bb3612b6d344c0686a94165a568277
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2199640
Commit-Queue: Seth Brenith <seth.brenith@microsoft.com>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67907}
The codegen uses a bunch of vpmax to try and keep set bits around. The
datatype for vpmax does not need to change for each instruction, since
vpmax U32 will persist set bits just as well. This simplifies the
instruction sequences for S1x8 and S1x16 anytrue.
I added a test to check a special case when a f64x2 contains -0.0 (top
bit set). A previous attempt to optimize codegen used floating point
compare, which does not distinguish between 0.0 and -0.0. So -0.0 will
compare equals to 0.0, and incorrect return 0 for anytrue.
Change-Id: I66013796af08a666009e6b2d774ea7ee7bdfe1ad
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2203113
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Reviewed-by: Bill Budge <bbudge@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67875}
... and other unused methods.
Bug: v8:9708
Change-Id: Ie3658878024fcddcd5503c6462e5ad873eba19b0
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2206733
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Auto-Submit: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67859}
Makes it clearer what this does. Added comments to explain it.
Change-Id: I90b0686f8a607cea32c482591b924e9103f7f445
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2205693
Commit-Queue: Simon Zünd <szuend@chromium.org>
Auto-Submit: Peter Marshall <petermarshall@chromium.org>
Reviewed-by: Simon Zünd <szuend@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67846}
Changes:
Cleanup:
- Make sure read_value_type has the same interface as other
read_* functions, i.e., returns the decoded value and writes
the consumed length into a pointer.
- DecodeLocals is now an instance method.
- DecodeLocals should fail when given a wrong number of locals.
Add tests to catch that.
- Fix a buggy test.
Refactoring in preparation of introducing the 'let'
instruction as per [wasm-gc]:
- DecodeLocals does not consume any input and can start from any pc.
- DecodeLocals gives the option of not appending the decoded
locals to local_types_.
- Separate locals initialization from signature.
Bug: v8:7748
Change-Id: Iaaff87fdb9abe0ddd716484ea3fa87779d2d1a2f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2202992
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67845}
Load extends always load 64-bits. Previously, we were setting the max
alignment to be the size_log_2 of the load_type. For LoadExtends the
load_type indicates what the lane size to be extended is, *NOT* the size
to be loaded.
Bug: chromium:1082848
Change-Id: I0c4115ea6ec916211b03afdb83376ccc05c0c244
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2202721
Reviewed-by: Bill Budge <bbudge@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67815}
The devtools frontend used this to set a lower interval (100us). Now the
frontend will stop setting this category and we will always profile
with 100us (which was already the default).
Bug: chromium:1082220
Change-Id: Iaa671d9750ad4c13b95c2c1ba1e433a1077c858a
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2198989
Reviewed-by: Sigurd Schneider <sigurds@chromium.org>
Commit-Queue: Peter Marshall <petermarshall@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67805}
This CL fixes a bug in Liftoff where stack parameters for builtins were
pushed in the reversed order.
CC=bbudge@chromium.orgR=clemensb@chromium.org
Bug: v8:10281
Change-Id: I51ab4f19b0dc3835140ca3c05c98cc82dfe9cac4
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2196341
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Commit-Queue: Andreas Haas <ahaas@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67779}
This is a reland of 902f48bdda, fixed
to avoid lock inversion problems detected by TSan.
Original change's description:
> [wasm][debug] Fix tier down for multiple isolates
>
> If multiple isolates are using the same module, we need to keep it
> tiered down as long as any isolate still has a debugger open.
> Also, we cannot short-cut the {NativeModule::TierDown} method, since the
> previously triggered tier down might not have finished yet.
> For now, each isolate starts an independent tier down (i.e. a full
> recompilation). We could optimize this later by skipping functions that
> are already tiered down, or are already scheduled for tier down, but we
> still need to wait for tier-down to finish on each isolate.
>
> R=thibaudm@chromium.org
>
> Bug: v8:10359
> Change-Id: I7ea6a6f5d3977e48718ac5bc94f9831541f6173f
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2190758
> Commit-Queue: Clemens Backes <clemensb@chromium.org>
> Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67716}
Bug: v8:10359
Cq-Include-Trybots: luci.v8.try:v8_linux64_tsan_rel
Cq-Include-Trybots: luci.v8.try:v8_linux64_tsan_isolates_rel_ng
Change-Id: Ie98cf073fc79e5c6991df6d4466de7b560274070
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2194451
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67754}
Changes:
- Implement subtyping for eqref.
- (Driveby) Declare more functions as constexpr in ValueType.
- Make minor changes needed to handle ref.eq.
- Write an elementary test.
Bug: v8:7748
Change-Id: I11d54227798ce56de70f3a6f83305b2f80b2f57f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2193715
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67752}
This reverts commit 9d3cca1cd3.
Reason for revert: Only the test needs to be skipped on s390. Refer to this: https://crrev.com/c/1981505
Original change's description:
> s390: [arm] Add missing RELATIVE_CODE_TARGET iteration
>
> Port b766299d2c
> Port 9592b043ee
> Port d915b8d668
>
> Original Commit Message:
>
> Code object iteration was missing logic for RELATIVE_CODE_TARGET
> reloc entries. Garbage collection could thus miss objects that were
> referenced only as targets of pc-relative calls or jumps.
>
> RELATIVE_CODE_TARGETs are only used on arm, mips, and s390 and only
> at mksnapshot-time.
>
> This exposed another issue in that the interpreter entry trampoline
> copy we generate for profiling *did* contain relative calls in
> runtime-accessible code. This is a problem, since code space on arm is,
> by default, too large to be fully addressable through pc-relative
> calls. This CL thus also disables the related
> FLAG_interpreted_frames_native_stack feature on arm.
>
> objects.
>
> R=jgruber@chromium.org, joransiu@ca.ibm.com, jyan@ca.ibm.com, michael_dawson@ca.ibm.com
> BUG=
> LOG=N
>
> Change-Id: Ifbcaed98d90a2730f0d6a8a7d32c621dab1ff5b2
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2087693
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Reviewed-by: Junliang Yan <jyan@ca.ibm.com>
> Commit-Queue: Milad Farazmand <miladfar@ca.ibm.com>
> Cr-Commit-Position: refs/heads/master@{#66644}
TBR=michael_dawson@ca.ibm.com,mlippautz@chromium.org,jyan@ca.ibm.com,jgruber@chromium.org,joransiu@ca.ibm.com,miladfar@ca.ibm.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Change-Id: Id645a9def23d278235ff77f25249d2187e8105ca
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2196521
Reviewed-by: Milad Farazmand <miladfar@ca.ibm.com>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Milad Farazmand <miladfar@ca.ibm.com>
Cr-Commit-Position: refs/heads/master@{#67751}
This CL adds 2 new values to the EmbedderStackState enum with more
explicit names. The old values are updated as aliases to the new
values and marked as soon to be deprecated. This CL also moves the
enum to v8-platform.h so that it can be reused by cppgc.
Depracating individual values in an enum is supported by GCC only
since version 6. Thus new macros were needed for the deprecation
(which delegate to the existing macros when supported). GCC versions
older than 6 are still used by the CQ bots.
Bug: chromium:1056170
Change-Id: Id1ea73edfbbae282b0d8a3bb103dbbbf8ebd417e
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2188971
Commit-Queue: Omer Katz <omerkatz@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67744}
This is a reland of 7f29c48ef6
After fixing TSAN failures in https://crrev.com/c/2192661 and https://crrev.com/c/2193712, this CL and be relanded without changes.
Original change's description:
> [heap] Remove sweeping state in incremental marking
>
> Remove the SWEEPING state from incremental marking. Sweeping is now
> always completed when starting incremental marking. Before this change
> there needed to be a safepoint each for starting marking and completing
> sweeping. Now both happens within a single safepoint.
>
> Bug: v8:10315
> Change-Id: Iad2835554865f2de24376372affe9a98992d1fa0
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2190419
> Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
> Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67678}
Bug: v8:10315
Change-Id: Ic949d125e72c4d17fd427d08d4b6f9056721eee9
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2196182
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67741}
There's no need for them to be in NativeContext.
This CL moves the rest of the Promise-related SFIs.
Bug: v8:10482
Change-Id: I7eb926be14bf44fb3cd01cb96b4769eff1c2911b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2190752
Commit-Queue: Marja Hölttä <marja@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Michael Lippautz <mlippautz@chromium.org>
Reviewed-by: Maya Lekova <mslekova@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67732}
As discussed under https://crrev.com/c/1981505,
Test requires an executable CODE_SPACE and is thus incompatible with
jitless mode.
Change-Id: Icddad50a3484f0cfc5fb4abd7175058d50bc06d3
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2193911
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67726}
Same implementation as the one for x64 in https://crrev.com/c/2186630.
Bug: v8:10501
Change-Id: If2b6c0fdc649afba3449d9579452cf7047a55a54
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2188556
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67721}
This CL is pretty mechanical; I just iterated through some Torque
classes making the following changes:
- Use @generateCppClass if it seems easy to
- Use @generatePrint if the existing printer doesn't do anything special
- Fix up any imprecise field types
It also includes two minor changes to implementation-visitor:
- Add a new -inl.h file with the things needed for
torque-generated/class-definitions-tq.cc so we don't need to keep
changing the compiler when we add @generateCppClass.
- Avoid emitting incorrect accessors for ExternalPointers. This isn't
strictly necessary for correctness, as the accessors defined in C++
already hide the ones inherited from generated code, but it makes me
feel safer.
Change-Id: I4d5a8ba6f86ebff57a0d147619212a3993b087c0
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2185824
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Commit-Queue: Seth Brenith <seth.brenith@microsoft.com>
Cr-Commit-Position: refs/heads/master@{#67719}
With bounds checks, null checks, and a test case.
Bug: v8:7748
Change-Id: I9e7d68ecd883bd0279f22d11c1dc73cc8716a4cb
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2192659
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67714}
Passing an isolate to {RecompileNativeModule} feels wrong, since
compilation and the generated code are totally isolate-independent. In
fact, the isolate is only used for updating counters.
Instead of passing the counters instead, this CL just refactors the code
to support a nullptr for the counters everywhere (some code paths
already supported that). The few recompilation would not make a
significant difference in the histograms anyway, and even have the risk
of skewing the data.
Drive-by 1: Rename {TierUp} to {StartTierUp} and update comments.
Drive-by 2: Remove non-actionable TODO.
R=thibaudm@chromium.org
Bug: v8:10359
Change-Id: Ic027f939bbc55398b90784922130fe1fe5573b0c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2187638
Reviewed-by: Thibaud Michaud <thibaudm@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67708}
Implement the instruction ref.as_non_null, as per the wasm gc extension.
Changes:
- Add the respective wasm opcode, move some asmjs opcodes around.
- Add a new type of wasm trap, IllegalCast.
- Modify wasm decoding and compilation pipeline.
- Add a minimal test.
- In wasm-compiler, generalize Unreachable to Trap.
- Optimize struct.get and struct.set for non-null types.
Bug: v8:7748
Change-Id: If2f794306c7cbfabc06e4f64988132346085d6dd
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2187616
Commit-Queue: Manos Koukoutos <manoskouk@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67705}
This reverts commit 7f29c48ef6.
Reason for revert: Causing TSAN failures on test bots.
Original change's description:
> [heap] Remove sweeping state in incremental marking
>
> Remove the SWEEPING state from incremental marking. Sweeping is now
> always completed when starting incremental marking. Before this change
> there needed to be a safepoint each for starting marking and completing
> sweeping. Now both happens within a single safepoint.
>
> Bug: v8:10315
> Change-Id: Iad2835554865f2de24376372affe9a98992d1fa0
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2190419
> Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
> Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67678}
TBR=ulan@chromium.org,dinfuehr@chromium.org
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: v8:10315
Change-Id: I5e76990155cf7aeee3ecefe5e37f9028cb188a00
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2192658
Reviewed-by: Dominik Inführ <dinfuehr@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67699}
Also, rename the WASM_COMPILED frame type to just WASM.
R=jkummerow@chromium.org
Bug: v8:10389
Change-Id: I71f16f41a69f8b0295ba34bd7d7fad71729546f2
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2187613
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67698}
This reverts commit 8374feed55.
Reason for revert: Breaking mjsunit/global-hash under the stress_snapshot variant, e.g.
https://ci.chromium.org/p/v8/builders/ci/V8%20Linux64%20-%20debug%20-%20fyi/12560
Original change's description:
> [snapshot] rehash JSMap and JSSet during deserialization
>
> To rehash JSMap and JSSet, we simply replace the backing store
> with a new one created with the new hash.
>
> Bug: v8:9187
> Change-Id: I90c25b18b33b7bc2b6ffe1b89fe17aa5f978b517
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2143983
> Commit-Queue: Joyee Cheung <joyee@igalia.com>
> Reviewed-by: Jakob Gruber <jgruber@chromium.org>
> Reviewed-by: Camillo Bruni <cbruni@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67663}
TBR=cbruni@chromium.org,jgruber@chromium.org,verwaest@chromium.org,joyee@igalia.com
# Not skipping CQ checks because original CL landed > 1 day ago.
Bug: v8:9187
Change-Id: I4a89768c031cd3971eefd9f88528ddd52e1284c9
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2192657
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67696}
This CL adds use counters, as well as the callbacks needed to
register usage during the SIMD origin trial.
Change-Id: I35b7f48277b519b72136f86cf03508adbaa069b8
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2189334
Commit-Queue: Deepti Gandluri <gdeepti@chromium.org>
Reviewed-by: Adam Klein <adamk@chromium.org>
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67690}
All wasm code is compiled now. Hence merge the
{WasmCompiledFrameSummary} into {WasmFrameSummary} and remove the
dispatch. Also, rename {IsWasmCompiled} to {IsWasm} and {AsWasmCompiled}
to {AsWasm}.
R=jkummerow@chromium.org
Bug: v8:10389
Change-Id: I33e413c7d0fa622249563091925b29631472b40c
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2187170
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Benedikt Meurer <bmeurer@chromium.org>
Commit-Queue: Clemens Backes <clemensb@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67689}
This patch implements f32x4.pmin, f32x4.pmax, f64x2.pmin, and f64x2.pmax
for x64 and interpreter.
Pseudo-min and Pseudo-max instructions were proposed in
https://github.com/WebAssembly/simd/pull/122. These instructions
exactly match std::min and std::max in C++ STL, and thus have different
semantics from the existing min and max.
The instruction-selector for x64 switches the operands around, because
it allows for defining the dst to be same as first (really the second
input node), allowing better codegen.
For example, b = f32x4.pmin(a, b) directly maps to vminps(b, b, a) or
minps(b, a), as long as we can define dst == b, and switching the
instruction operands around allows us to do that.
Bug: v8:10501
Change-Id: I06f983fc1764caf673e600ac91d9c0ac5166e17e
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2186630
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67688}
... via a comment in the API and a CHECK in
Isolate::RunHostInitializeImportMetaObjectCallback.
Also restructure things a little bit such that
this function really just runs the callback and
doesn't deal with module internals. Memoization
now happens in the SourceTextModule class.
Bug: v8:7044
Change-Id: I5b850ae629c3638c4b30dfdeaa996642a33d14dc
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2190413
Reviewed-by: Sathya Gunasekaran <gsathya@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Toon Verwaest <verwaest@chromium.org>
Auto-Submit: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67682}
Remove the SWEEPING state from incremental marking. Sweeping is now
always completed when starting incremental marking. Before this change
there needed to be a safepoint each for starting marking and completing
sweeping. Now both happens within a single safepoint.
Bug: v8:10315
Change-Id: Iad2835554865f2de24376372affe9a98992d1fa0
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2190419
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67678}
Background threads can now start incremental marking when necessary. In
contrast to the main thread they always need to schedule a job and can't
start incremental marking right away. Background threads also use a
simpler heuristic for deciding whether to start incremental marking.
Bug: v8:10315
Change-Id: I2b94e8273c8be860157fe9670797048ed1c5c3da
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2184149
Reviewed-by: Hannes Payer <hpayer@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Commit-Queue: Dominik Inführ <dinfuehr@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67675}
This reverts commit 6204768bab.
Reason for revert: A number of Clusterfuzz reports (e.g. https://bugs.chromium.org/p/chromium/issues/detail?id=1079474)
Original change's description:
> [turbofan] Improve equality on NumberOrOddball
>
> This CL cleans up CompareOperationFeedback by replacing it with a
> composable set of flags. The interpreter is changed to collect
> more specific feedback for abstract equality, especially if oddballs
> are involved.
>
> TurboFan is changed to construct SpeculativeNumberEqual operator
> instead of the generic JSEqual in many more cases. This change has
> shown a local speedup of a factor of 3-10, because the specific
> operator is way faster than calling into the generic builtin, but
> it also enables additional optimizations, further improving
> runtime performance.
>
> Bug: v8:5660
> Change-Id: I856752caa707e9a4f742c6e7a9c75552fb431d28
> Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2162854
> Reviewed-by: Mythri Alle <mythria@chromium.org>
> Reviewed-by: Georg Neis <neis@chromium.org>
> Commit-Queue: Nico Hartmann <nicohartmann@chromium.org>
> Cr-Commit-Position: refs/heads/master@{#67645}
TBR=rmcilroy@chromium.org,neis@chromium.org,mythria@chromium.org,nicohartmann@chromium.org
Change-Id: I3410310ed2b1ff2eaee70c1b91c3151d35866108
No-Presubmit: true
No-Tree-Checks: true
No-Try: true
Bug: v8:5660
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2190414
Reviewed-by: Nico Hartmann <nicohartmann@chromium.org>
Commit-Queue: Nico Hartmann <nicohartmann@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67673}
along with WASM_ARRAY_TYPE, a WasmArray class, and a very basic
test.
Bug: v8:7748
Change-Id: I1ad4ff78e428972be52130cc179a91c76fcdbdc6
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2185136
Commit-Queue: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Ulan Degenbaev <ulan@chromium.org>
Reviewed-by: Clemens Backes <clemensb@chromium.org>
Reviewed-by: Tobias Tebbi <tebbi@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67671}
To rehash JSMap and JSSet, we simply replace the backing store
with a new one created with the new hash.
Bug: v8:9187
Change-Id: I90c25b18b33b7bc2b6ffe1b89fe17aa5f978b517
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2143983
Commit-Queue: Joyee Cheung <joyee@igalia.com>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Camillo Bruni <cbruni@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67663}
Implement conversion of an i8x16 node to a f32x4 node.
Bug: v8:10507
Change-Id: Ifefffb779dbf25b57eae278afe41c11b41c949ac
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2185472
Reviewed-by: Deepti Gandluri <gdeepti@chromium.org>
Commit-Queue: Zhi An Ng <zhin@chromium.org>
Cr-Commit-Position: refs/heads/master@{#67659}
