fast-mode code generator.
AST expression nodes are annotated with a location when doing the
initial syntactic check of the AST. In the current implementation,
expression locations are 'temporary' (ie, allocated to the stack) or
'nowhere' (ie, the expression's value is not needed though it must be
evaluated for side effects).
For the assignment '.result = true' on IA32, we had before (with the
true value already on top of the stack):
32 mov eax,[esp]
35 mov [ebp+0xf4],eax
38 pop eax
Now:
32 pop [ebp+0xf4]
======== On x64, before:
37 movq rax,[rsp]
41 movq [rbp-0x18],rax
45 pop rax
Now:
37 pop [rbp-0x18]
======== On ARM, before (with the true value in register ip):
36 str ip, [sp, #-4]!
40 ldr ip, [sp, #+0]
44 str ip, [fp, #-12]
48 add sp, sp, #4
Now:
36 str ip, [fp, #-12]
Review URL: http://codereview.chromium.org/267118
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3076 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Turned on with '--log-producers' flag, also needs '--noinline-new' (this is temporarily), '--log-code', '--log-gc'. Not all allocations are traced (I'm investigating.)
Stacks are stored using weak handles. Thus, when an object is collected, its allocation stack is deleted.
Review URL: http://codereview.chromium.org/267077
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3069 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
fast code generator is optimized for compilation time and code size.
Currently it is only implemented on IA32. It is potentially triggered
for any code in the global scope (including code eval'd in the global
scope). It performs a syntactic check and chooses to compile in fast
mode if the AST contains only supported constructs and matches some
other constraints.
Initially supported constructs are
* ExpressionStatement,
* ReturnStatement,
* VariableProxy (variable references) to parameters and
stack-allocated locals,
* Assignment with lhs a parameter or stack-allocated local, and
* Literal
This allows compilation of literals at the top level and not much
else.
All intermediate values are allocated to temporaries and the stack is
used for all temporaries. The extra memory traffic is a known issue.
The code generated for 'true' is:
0 push ebp
1 mov ebp,esp
3 push esi
4 push edi
5 push 0xf5cca135 ;; object: 0xf5cca135 <undefined>
10 cmp esp,[0x8277efc]
16 jnc 27 (0xf5cbbb1b)
22 call 0xf5cac960 ;; code: STUB, StackCheck, minor: 0
27 push 0xf5cca161 ;; object: 0xf5cca161 <true>
32 mov eax,[esp]
35 mov [ebp+0xf4],eax
38 pop eax
39 mov eax,[ebp+0xf4]
42 mov esp,ebp ;; js return
44 pop ebp
45 ret 0x4
48 mov eax,0xf5cca135 ;; object: 0xf5cca135 <undefined>
53 mov esp,ebp ;; js return
55 pop ebp
56 ret 0x4
Review URL: http://codereview.chromium.org/273050
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@3067 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The profile is taken together with constructors profile. In theory, it
should represent a complete heap graph. However, this takes a lot of memory,
so it is reduced to a more compact, but still useful form. Namely:
- objects are aggregated by their constructors, except for Array and Object
instances, that are too hetereogeneous;
- for Arrays and Objects, initially every instance is concerned, but then
they are grouped together based on their retainer graph paths similarity (e.g.
if two objects has the same retainer, they are considered equal);
Review URL: http://codereview.chromium.org/200132
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2903 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The SCons build now has the options profilingsupport and debuggersupport for controlling the setting of the defines ENABLE_LOGGIGN_AND_PROFILING and ENABLE_DEBUGGER_SUPPORT. By default both are set to true.
The changes to the XCode project have not been tested.
Review URL: http://codereview.chromium.org/195061
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2875 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
-fstrict-aliasing is enabled by mainline gcc at -O2 and higher, but in Apple
gcc, it must be enabled explicitly. This results in a 1.5% improvement in V8
benchmark scores.
This also removes the -fno-exceptions and -fno-rtti settings from v8.gyp for
the Mac, and removes -fno-rtti from v8.gyp for Linux, because these settings
have become part of Chromium's common.gypi, included here, as of r23304 at the
latest. The settings in v8.gyp have become redundant.
Review URL: http://codereview.chromium.org/174154
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2734 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
system can't currently process stacks produced by gcc -fomit-frame-pointer
properly. The drawback outweighs the 2% performance improvement. Once
the crash reporting system is able to handle this optimization, it should be
revisited.
Review URL: http://codereview.chromium.org/173123
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2733 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
These files will make it possible to start working with the 64-bit version on Windows.
The GUID's of the x64 project files are the same as their ia32 counterparts, but that does not matter as they will never be used in the same solution.
Added a temporary #error when building 64-bit version on Windows.
Review URL: http://codereview.chromium.org/171111
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2711 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
MSVS names '.map' file using only module's name, so both 'a.exe' and 'a.dll' will have 'a.map' file. To distinguish an originating module, we're now checking for image base which is always 00400000 for .exe files, and not 00400000 for .dlls.
Verified that windows-tick-processor can now process logs from Chromium using .map file generated for 'chrome.dll', an that it still works for V8's 'shell.exe'.
Review URL: http://codereview.chromium.org/172044
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2699 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
generated in one-pass from the source AST, code is generated from the
CFG. Enabled by the flag --multipass and disabled by default.
Rudimentary and currently only supports literal expressions and return
statements. There are some other known limitations (e.g., missing
support for tracing).
Review URL: http://codereview.chromium.org/159695
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2596 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
It is activated with '--log-gc' flag.
JS object size is calculated as its size + size of 'properties' and 'elements' arrays, if they are non-empty. This doesn't take maps, strings, heap numbers, and other shared objects into account.
As Soeren suggested, I've moved ZoneSplayTree from jsregexp to zone, and removed now empty jsregexp-inl header file.
Review URL: http://codereview.chromium.org/159504
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2570 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Also, add user time into heap sample begin events to make '--log-gc' flag alone sufficient for producing heap logs (previously, samples times were extracted from scavenge events which are only logged with '--log' flag).
Review URL: http://codereview.chromium.org/149611
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2461 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
'nm' is now called with an option to report function code sizes. Static code entries are restricted to the sizes reported, and the remaining unnamed code is attributed to a library as a whole. This makes reports more accurate, as some functions are tiny, but has chunks of unnamed code behind them.
This change doesn't affect reporting on Windows, as in .map files function code sizes aren't specified.
Review URL: http://codereview.chromium.org/149513
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@2455 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
