To be consistent with the all the other tiers and avoid confusion, we
rename --opt to ---turbofan, and --always-opt to --always-turbofan.
Change-Id: Ie23dc8282b3fb4cf2fbf73b6c3d5264de5d09718
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3610431
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Commit-Queue: Camillo Bruni <cbruni@chromium.org>
Reviewed-by: Jakob Linke <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/main@{#80336}
- Remove flag --block-concurrent-recompilation and its implementation,
including %UnblockConcurrentCompilation.
- Rewrite tests that used it in terms of the primitives introduced in
my previous CL:
https://chromium-review.googlesource.com/c/v8/v8/+/3071400/
- Remove "sync"/"no sync" arguments from %GetOptimizationStatus,
assertOptimized, etc. These are now always "no sync": they don't
do any magic.
- Remove "if %IsConcurrentRecompilationSupported then quit" from some
tests in favor of --concurrent-recompilation in their Flags line.
Bug: v8:12041, v8:7790
Change-Id: I966aae4fec85e6f9e7aeed2ba2c12e9198a3991f
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3077149
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Commit-Queue: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76298}
Some tests want to invalidate part of the VM state after an optimization
has consumed the old state but before the code is installed.
The existing mechanism for this is --block-concurrent-recompilation
and %UnblockConcurrentRecompilation(). The former suspends optimization
right after PrepareJob, before the background ExecuteJob phase. The
intrinsic can then be used to unblock it again.
This was good enough so far because the main "consume" work used to
happen on the main thread. With concurrent inlining this is no longer
true and we need something else.
This CL introduces three intrinsics:
%DisableOptimizationFinalization turns off automatic finalization of
background optimizations.
%FinalizeOptimization() can then be called at an appropriate time to
manually finalize (and thus install) the code and reenable automatic
finalization.
In case one wants to perform some action on the main thread after the
concurrent optimization has finished but before it is finalized, one can
do so with the help of %WaitForBackgroundOptimization() (see tests).
In a followup CL I'm removing the old mechanism since it now seems
redundant.
Bug: v8:12041, v8:7790
Change-Id: Ib7195789105922eb7e4bff86dc5bc11e96a4f97b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3071400
Commit-Queue: Georg Neis <neis@chromium.org>
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76190}
Based on a CL by mvstanton@.
Bug: v8:7790,v8:12030,v8:12031,v8:12041
Change-Id: I58b75bd96c724a99133bec7d3bd6cf4e0c9be6d4
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3059683
Reviewed-by: Jakob Kummerow <jkummerow@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Cr-Commit-Position: refs/heads/master@{#76055}
Also, copying hints can be removed from literals. Shallow
copying wasn't used for some time, because of the
way we treat mutable heap numbers.
Change-Id: Ieeba44a9f8e80c4183af8f4751f68dd3a542532e
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/3009230
Reviewed-by: Leszek Swirski <leszeks@chromium.org>
Reviewed-by: Toon Verwaest <verwaest@chromium.org>
Commit-Queue: Michael Stanton <mvstanton@chromium.org>
Cr-Commit-Position: refs/heads/master@{#75717}
Until this CL, the JSHeapBroker::GetPropertyAccessInfo (GPAI) process
was as follows:
1. GPAI is called on the main thread (MT) during the serialization
phase to create and cache PAIs.
2. GPAI is called again from the background thread (BT); only cached
PAIs from step 1 are usable.
As part of concurrent inlining, the goal is to move GPAI fully to the
background thread. This CL takes a major step in that direction by
making GPAI itself callable from the BT without resorting solely to PAIs
that were previously cached on the MT.
There are two main reasons why GPAI previously had to run on the MT:
a) Concurrent access to Maps and other heap objects.
b) Serialization and creation of ObjectRefs for objects discovered
during GPAI.
This CL addresses only reason a) and leaves b) for future work. This
is done by keeping the two-pass approach, s.t. the initial call of
GPAI on the MT discovers and serializes objects. We then clear all
cached PAIs. The second call of GPAI on the BT thus runs full logic in a
concurrent setting.
Once all relevant objects (= maps and prototypes) no longer require
MT-serialization, reason b) is also addressed and the first pass can be
removed.
The new logic is implemented behind the runtime flag
--turbo-concurrent-get-property-access-info (default true), intended
to be removed in the future.
Bug: v8:7790
Change-Id: Idbdbfe091d7316529246a686bb6d71c2a0f06f8b
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2817793
Commit-Queue: Jakob Gruber <jgruber@chromium.org>
Auto-Submit: Jakob Gruber <jgruber@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#74120}
This CL is part of a series that implements Turbofan support for
property accesses satisfying the following conditions:
1. The holder is a dictionary mode object.
2. The holder is a prototype.
3. The access is a load.
This feature will only be enabled if the build flag
v8_dict_property_const_tracking is set.
This particular CL modifies existing mjsunit tests whose assumptions
don't hold if v8_dict_property_const_tracking is enabled. This is
done by adding special handling for the case that
%IsDictPropertyConstTrackingEnabled() holds.
Bug: v8:11248
Change-Id: Ia36be73e4659a988b2471f0c8151b0442f3a98f5
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/2780292
Commit-Queue: Igor Sheludko <ishell@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Cr-Commit-Position: refs/heads/master@{#73745}
This enables constant field tracking unconditionally.
TBR=jgruber@chromium.org
Bug: v8:8361
Change-Id: I02f35827d860c3e0f18a3d55cb156c088d48bc94
Reviewed-on: https://chromium-review.googlesource.com/c/v8/v8/+/1585730
Commit-Queue: Jaroslav Sevcik <jarin@chromium.org>
Reviewed-by: Georg Neis <neis@chromium.org>
Reviewed-by: Igor Sheludko <ishell@chromium.org>
Cr-Commit-Position: refs/heads/master@{#61055}
This CL includes runtime and IC parts of the tracking. It is controlled by
compile-time flag FLAG_constant_field_tracking and currently disabled.
Transition from kConst to kMutable still involves map deprecation.
BUG=v8:5495
Review-Url: https://codereview.chromium.org/2598543003
Cr-Commit-Position: refs/heads/master@{#43081}
This CL adds --crankshaft and --no-always-opt flags to the tests that use
assertOptimized() and assertUnoptimized() respectively.
This CL also adds presubmit checks that ensure that tests have the proper
flags set.
BUG=v8:5890
Review-Url: https://codereview.chromium.org/2653753007
Cr-Commit-Position: refs/heads/master@{#42709}
The mentioned asserts did not work properly with interpreted and turbofanned functions.
To fix this issue %GetOptimizationStatus() now returns a set of flags instead of a single value.
This CL also adds more helper functions to mjsunit, like isNeverOptimize(), isAlwaysOptimize(),
isOptimized(fun), etc.
BUG=v8:5890
Review-Url: https://codereview.chromium.org/2654733004
Cr-Commit-Position: refs/heads/master@{#42703}
