Port r11010 (1daa81bc).
MIPS-specific changes:
-register codes and registers are defined using a macro to avoid redundancy
-renamed s8_fp to fp, removed the "fp" alias
-removed kSavedValueRegister (found by check-static-initializers.sh)
Original commit message:
Landing for pliard@chromium.org: Remove static initializers in v8.
This change includes two CLs by pliard@chromium.org:
1. http://codereview.chromium.org/9447052/ (Add CallOnce() and simple LazyInstance implementation):
Note that this implementation of LazyInstance does not handle global destructors (i.e. the lazy instances a
This CL was initially reviewed on codereview.appspot.com:
http://codereview.appspot.com/5687064/
2. http://codereview.chromium.org/9455088/ (Remove static initializers in v8):
This CL depends on CL 9447052 (adding CallOnce and LazyInstance).
It is based on a patch sent by Digit.
With this patch applied, we have only one static initializer left (in atomicops_internals_x86_gcc.cc). This
This CL also modifies the presubmit script to check the number of static initializers.
BUG=
TEST=
Review URL: https://chromiumcodereview.appspot.com/9689069
Patch from Daniel Kalmar <kalmard@homejinni.com>.
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@11241 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Some instructions can use >16 bit immediates if they represent a <=16 bit signed value.
However some logical instructions (andi, xori, ori, lui) should always treat the immediate value as unsigned.
This patch adds an ASSERT to these places and a minor change to MacroAssembler::li to satisfy this.
BUG=
TEST=
Review URL: https://chromiumcodereview.appspot.com/9309077
Patch from Daniel Kalmar <kalmard@homejinni.com>.
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@10644 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Highlights:
- assembler.h adds FPU definitions used for Crankshaft.
- Support optimization of mips call: jalr->jal
- includes changes to set_target_address_at(), support routines.
- Add 2nd use of Apply() to update target addresses.
- Minor debugging improvement in simulator.
BUG=
TEST=
Review URL: http://codereview.chromium.org/7888003
Patch from Paul Lind <plind44@gmail.com>.
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@9259 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The ARM and MIPS assemblers had a bug where they did not handle the last element
in the list of code positions correctly during the fixup of offsets for forward
jumps. This happened when the first instruction contained a forward jump to a
label, and that label was used in a forward jump later, too.
Unified the code for Assembler::next on ARM and MIPS while we were there.
Added test cases, even for ia32/x64, which seem to be correct, even I don't
fully understand why... %-}
BUG=v8:1644
Review URL: http://codereview.chromium.org/7786001
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@9063 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Improve the branch and branch-trampoline mechanism to automatically
use long-jumps when function size grows large. Reduce size of emitted
trampoline pools.
Now passes mozilla regress-80981.js.
BUG=
TEST=
Review URL: http://codereview.chromium.org//7239020
Patch from Paul Lind <plind44@gmail.com>.
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@8433 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
The already working watchpoint break mechanism has been extended to handle "stop" instructions, with text messages.
Explanation (also in constants-mips.h):
On MIPS Simulator breakpoints can have different codes:
- Breaks between 0 and kMaxWatchpointCode are treated as simple watchpoints, the simulator will run through them and print the registers.
- Breaks between kMaxWatchpointCode and kMaxStopCode are treated as stop() instructions (see Assembler::stop()).
- Breaks larger than kMaxStopCode are simple breaks, dropping you into the debugger.
The current values are 31 for kMaxWatchpointCode and 127 for kMaxStopCode.
From the user's point of view this works the same way as the ARM stop instruction except for the break code usage detailed above.
Ported commits: r5723 (3ba78d24)
BUG=
TEST=
Review URL: http://codereview.chromium.org//7062014
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@8069 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
This commit adds current working versions of assembler, macro-assembler,
disassembler, and simulator.
All other mips arch files are replaced with stubbed-out versions that
will build.
Arch independent files are updated as needed to support building and
running mips.
The only test is cctest/test-assembler-mips, and this passes on the
simulator and on mips hardware.
TEST=none
BUG=none
Patch by Paul Lind from MIPS.
Review URL: http://codereview.chromium.org/6730029/
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@7388 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Added support for more precise break points when debugging and stepping. To achieve that additional nop instructions are inserted where breaking would otherwise be impossible. The number of nop instructions inserted are sufficient to make place for patching with a call to a debug break code stub. On Intel that is 5 nop's for 32-bit and 13 for 64-bit. Om ARM 3 nop instructions (12 bytes) are required.
In order to avoid inserting nop's in to many places a simple ast checker have been added to check whether there are breakable code in a statement or expression. If it is possible to break in an expression no additional break enabeling code is inserted.
Added break locations to the true and false part of a conditional expression.
Added stepping tests to cover more constructs.
These changes are only in the full compiler.
Changed the default value for the option --debugger in teh d8 shell from true to false. The reason for this is that with --debugger turned on the full compiler will be used for all code in when running d8, which can be unexpeceted.
Review URL: http://codereview.chromium.org/2693002
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4820 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
Chromium build.
v8.gyp no longer sets any V8_TARGET_ARCH_* macro on the Mac. Instead, the
proper V8_TARGET_ARCH_* macro will be set by src/globals.h in the same way as
the V8_HOST_ARCH_* macro when it detects that no target macro is currently
defined. The Mac build will attempt to compile all ia32 and x86_64 .cc files.
#ifdef guards in each of these target-specific source files prevent their
compilation when the associated target is not selected. For completeness,
these #ifdef guards are also provided for the arm and mips .cc files.
BUG=706
TEST=x86_64 Mac GYP/Xcode-based Chromium build (still depends on other changes)
Review URL: http://codereview.chromium.org/2133003
git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@4666 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
