This is a first step towards a perfect world where a call interface descriptor is the only place that defines calling convention for a particular code stub.
Review-Url: https://codereview.chromium.org/2172223002
Cr-Commit-Position: refs/heads/master@{#38059}
For some bytecodes it is beneficial to always look for a Star
bytecode when dispatching to the next and inline perform it
without dispatching to the Star handler.
BUG=v8:4280
LOG=N
Review-Url: https://codereview.chromium.org/2142273003
Cr-Commit-Position: refs/heads/master@{#37904}
Make intrinsic ids a contiguous set of ids so that the switch statement can build
a table switch rather than doing a large if/else tree.
BUG=v8:4822
LOG=N
Review-Url: https://codereview.chromium.org/2084623002
Cr-Commit-Position: refs/heads/master@{#37135}
We get less "pollution" of type feedback if we have one vector per native
context, rather than one for the whole system. This CL moves the vector
appropriately.
BUG=
Review-Url: https://codereview.chromium.org/1906823002
Cr-Commit-Position: refs/heads/master@{#36539}
Previously, CodeStubAssembler macros performing FixedArray element accesses had
to compute offsets to elements explicitly with a fair amount of duplicated
code. Furthermore, any peephole optimizations that could produce better code--
like recognizing constant indices or combining array index computation with Smi
untagging--were also duplicated.
This change factors the code to compute FixedArray index offsets into a common
routine in the CodeStubAssembler that applies standard peephole optimizations to
all accesses. In order to do this, it also introduces limited introspection into
the up-until-now opaque Node* type exported from code-assembler.h, allowing
Nodes to be queried whether they are constant and extracting their constant
value in that case.
Review-Url: https://codereview.chromium.org/1989363004
Cr-Commit-Position: refs/heads/master@{#36370}
In order to support compiling to baseline on return we need to be able to
return to the actual return address. With this change this is what the
Return bytecode now does, removing the need for the
InterpreterExitTrampoline.
This change also removes the InterpreterNotifyDeoptXXX builtins and
unifies FCG and Igntion to both use NotifyDeoptXXX. As part of this
change, FullCodegenerator::State is moved to Deoptimize::BailoutState.
BUG=v8:4280
LOG=N
Committed: https://crrev.com/34c9626e2ee56fe805de549697ca5323aed7cb66
Cr-Commit-Position: refs/heads/master@{#36288}
Review-Url: https://codereview.chromium.org/1969423002
Cr-Commit-Position: refs/heads/master@{#36310}
Reason for revert:
Breaks
https://build.chromium.org/p/client.v8.ports/builders/V8%20Linux%20-%20arm%20-%20sim/builds/619
Might only affect pure release builds?
Original issue's description:
> [Interpreter] Remove InterpreterExitTrampoline and replace with returning to the entry trampoline.
>
> In order to support compiling to baseline on return we need to be able to
> return to the actual return address. With this change this is what the
> Return bytecode now does, removing the need for the
> InterpreterExitTrampoline.
>
> This change also removes the InterpreterNotifyDeoptXXX builtins and
> unifies FCG and Igntion to both use NotifyDeoptXXX. As part of this
> change, FullCodegenerator::State is moved to Deoptimize::BailoutState.
>
> BUG=v8:4280
> LOG=N
>
> Committed: https://crrev.com/34c9626e2ee56fe805de549697ca5323aed7cb66
> Cr-Commit-Position: refs/heads/master@{#36288}
TBR=mstarzinger@chromium.org,oth@chromium.org,rmcilroy@chromium.org
# Skipping CQ checks because original CL landed less than 1 days ago.
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280
Review-Url: https://codereview.chromium.org/1986353002
Cr-Commit-Position: refs/heads/master@{#36294}
In order to support compiling to baseline on return we need to be able to
return to the actual return address. With this change this is what the
Return bytecode now does, removing the need for the
InterpreterExitTrampoline.
This change also removes the InterpreterNotifyDeoptXXX builtins and
unifies FCG and Igntion to both use NotifyDeoptXXX. As part of this
change, FullCodegenerator::State is moved to Deoptimize::BailoutState.
BUG=v8:4280
LOG=N
Review-Url: https://codereview.chromium.org/1969423002
Cr-Commit-Position: refs/heads/master@{#36288}
Removes some control edges added from the RawMachineAssembler to the end of the graph.
Adds a parameter that tells the Verifier to ignore effect and control inputs.
Review URL: https://codereview.chromium.org/1912853003
Cr-Commit-Position: refs/heads/master@{#35731}
Removes the register file machine register from the interpreter and
replaces it will loads from the parent frame pointer. As part of this
change the raw operand values for register values changes to enable the
interpreter to keep using the operand value as the offset from the
parent frame pointer.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1894063002
Cr-Commit-Position: refs/heads/master@{#35618}
The current context is stored as a stack slot on the interpreter frame
and therefore we don't need to also maintain a machine register for the
context. Removes this register from bytecode handlers.
In the process modifies this frees up a register on ia32 to keep the
dispatch table pointer in a register rather than on a stack slot on
ia32.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1887493004
Cr-Commit-Position: refs/heads/master@{#35511}
Modifies Ignition to store code entry addresses in the dispatch table
rather than code objects. This allows the interpreter to avoid
calculating the code entry address from the code object on every
dispatch and provides a ~5-7% performance improvement on Octane with
Ignition.
This change adds ArchOpcode::kArchTailCallAddress to TurboFan to enable
tail call dispatch using these code addresses. It also adds a Dispatch
linkage creator (distinct from the stub linkage type used previously) to
allow targetting a code address target (which will diverge further from
the stub linkage type when we remove the context machine register in
Ignition).
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1882073002
Cr-Commit-Position: refs/heads/master@{#35480}
Anotates bytecodes with a description of how each uses the accumulator.
Validates annotations and uses of accumulator when generating bytecode
handlers.
Only prints the accumulator during tracing where used.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1852213002
Cr-Commit-Position: refs/heads/master@{#35281}
This change introduces wide prefix bytecodes to support wide (16-bit)
and extra-wide (32-bit) operands. It retires the previous
wide-bytecodes and reduces the number of operand types.
Operands are now either scalable or fixed size. Scalable operands
increase in width when a bytecode is prefixed with wide or extra-wide.
The bytecode handler table is extended to 256*3 entries. The
first 256 entries are used for bytecodes with 8-bit operands,
the second 256 entries are used for bytecodes with operands that
scale to 16-bits, and the third group of 256 entries are used for
bytecodes with operands that scale to 32-bits.
LOG=N
BUG=v8:4747,v8:4280
Review URL: https://codereview.chromium.org/1783483002
Cr-Commit-Position: refs/heads/master@{#34955}
Operations on word size data must be word sized, and not word32.
Currently this only generates worse code, but in the future, it
might even generate wrong code, so we should better get this right
from the beginning.
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1748953004
Cr-Commit-Position: refs/heads/master@{#34378}
Adds a profiling counter to each BytecodeArray object, and adds
code to Jump and Return bytecode handlers to update this
counter by the size of the jump or the distance from the return
to the start of the function. This is more accurate than fullcodegen's
approach since it takes forward jumps into account as well as back-edges.
Modifies RuntimeProfiler to track ticks for interpreted frames.
Currently we use the SharedFunctionInfo::profiler_ticks() instead
of adding another to tick field to avoid adding another field to
BytecodeArray since SharedFunctionInfo::profiler_ticks() is only
used by Crankshaft otherwise so we shouldn't need both for
BUG=v8:4689
LOG=N
Review URL: https://codereview.chromium.org/1707693003
Cr-Commit-Position: refs/heads/master@{#34166}
This CL introduces two new bytecodes TailCall and TailCallWide.
BUG=v8:4698,v8:4687
LOG=N
Review URL: https://codereview.chromium.org/1698273003
Cr-Commit-Position: refs/heads/master@{#34083}
Moves InterpreterAssembler out of the compiler directory and into the
interpreter directory. Makes InterpreterAssembler as subclass of
CodeStubAssembler.
As part of this change, the special bytecode dispatch linkage type
is removed and instead we use a InterfaceDispatchDescriptor and
a normal CodeStub linkage type.
Removes a bunch of duplicated logic in InterpreterAssembler and
instead uses the CodeStubAssembler logic. Refactors Interpreter
with these changes.
Modifies CodeStubAssembler to add the extra operations required
by the Interpreter (extra call types, raw memory access and some extra
binary ops). Also adds the ability for subclasses to add extra
prologue and epilogue operations around calls, which is required
for the Interpreter.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1673333004
Cr-Commit-Position: refs/heads/master@{#33873}
