A pre-requisite for this change was changing the interpreter to use
Runtime::ForInStep to bring the interpreter implementation closer
to the turbofan implementation. Also required to flatten out the
cache parameters into the interpreter frame for de-opt.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1531693002
Cr-Commit-Position: refs/heads/master@{#32986}
Adds FrameState nodes to graphs built by the Bytecode Graph Builder, in
preparation for adding deopt support. Also adds a new
FrameStateType::kInterpretedFunction to allow for specialized deopt
stack translation for interpreted frames. Finally adds support for
disabling typed lowering of binary ops, since the current approach
relies on a FrameState hack which does not apply to interpreted frames
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1514413002
Cr-Commit-Position: refs/heads/master@{#32964}
Adds support for loading and storing lookup variables.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1524803003
Cr-Commit-Position: refs/heads/master@{#32913}
This change adds support for local control flow when building graphs
from bytecode. The change ensures loop emitted from the bytecode
generator are in natural order so the only back branches are for loops.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1502243002
Cr-Commit-Position: refs/heads/master@{#32911}
Adds a slot for the bytecode offset to interpreter stack frames and
saves it on calls, and restores after calls.
Also fixes RawMachineAssembler::Return() to call MergeControlToEnd.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1512543002
Cr-Commit-Position: refs/heads/master@{#32906}
Adds implementation and tests for CreateObjectLiteral, CreateArrayLiteral and CreateRegExpLiteral
to bytecode graph builder. Also changes these bytecodes to expect three operands instead of using
accumulator to pass one of the operands. This is done to avoid looking into the earlier nodes to
fetch operands in the bytecode graph builder. Also adds support for wide variant of these
bytecodes to bytecode generator and bytecode graph builder.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1503963002
Cr-Commit-Position: refs/heads/master@{#32710}
PreviousBytecodeHelper used to return Bytecode::kLast if the previous bytecode was not
in the same basicblock. Changed it to be instantiated only when the previous bytecode
is in the same basic block.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1510553002
Cr-Commit-Position: refs/heads/master@{#32702}
Attempt #<really big number>
Parses, and lazily rewrites Destructuring Assignment expressions. The rewriting strategy involves inserting a placeholder RewritableAssignmentExpression into the AST, whose content expression can be completely rewritten at a later time.
Lazy rewriting ensures that errors do not occur due to eagerly rewriting nodes which form part of a binding pattern, thus breaking the meaning of the pattern --- or by eagerly rewriting ambiguous constructs that are not immediately known
BUG=v8:811
LOG=Y
R=adamk@chromium.org, bmeurer@chromium.org, rossberg@chromium.org
Review URL: https://codereview.chromium.org/1309813007
Cr-Commit-Position: refs/heads/master@{#32623}
an optomization to remove redundant cast operations.
1. Adds an optimization to remove redundant ToBoolean and ToName operations.
2. Adds implementation and tests for cast operatorts to bytecode graph builder.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1468003002
Cr-Commit-Position: refs/heads/master@{#32408}
Previously all contexts had a link to the global object, but what is
required in most cases (except for the global load, store and delete
case) is the native context.
This also removes the second dummy global object that was still linked
to every native context. We will add a different mechanism to ensure
that builtins do not pollute the actual global object during
bootstrapping.
Drive-by-fix: Unify some MacroAssembler magic and drop obsolete stuff.
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux_nosnap_rel
R=yangguo@chromium.org,mstarzinger@chromium.org
Committed: https://crrev.com/d290f204938295bfecc5c8e645ccfcff6e80ddb8
Cr-Commit-Position: refs/heads/master@{#32375}
Review URL: https://codereview.chromium.org/1480003002
Cr-Commit-Position: refs/heads/master@{#32381}
Reason for revert:
[Sheriff] Breaks:
https://build.chromium.org/p/client.v8/builders/V8%20Linux%20-%20nosnap/builds/5472
Original issue's description:
> [runtime] Replace global object link with native context link in all contexts.
>
> Previously all contexts had a link to the global object, but what is
> required in most cases (except for the global load, store and delete
> case) is the native context.
>
> This also removes the second dummy global object that was still linked
> to every native context. We will add a different mechanism to ensure
> that builtins do not pollute the actual global object during
> bootstrapping.
>
> Drive-by-fix: Unify some MacroAssembler magic and drop obsolete stuff.
>
> R=yangguo@chromium.org
>
> Committed: https://crrev.com/d290f204938295bfecc5c8e645ccfcff6e80ddb8
> Cr-Commit-Position: refs/heads/master@{#32375}
TBR=yangguo@chromium.org,mstarzinger@chromium.org,bmeurer@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
Review URL: https://codereview.chromium.org/1478303002
Cr-Commit-Position: refs/heads/master@{#32377}
Previously all contexts had a link to the global object, but what is
required in most cases (except for the global load, store and delete
case) is the native context.
This also removes the second dummy global object that was still linked
to every native context. We will add a different mechanism to ensure
that builtins do not pollute the actual global object during
bootstrapping.
Drive-by-fix: Unify some MacroAssembler magic and drop obsolete stuff.
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1480003002
Cr-Commit-Position: refs/heads/master@{#32375}
Moves all files related to AST and scopes into ast/,
and all files related to scanner & parser to parsing/.
Also eliminates a couple of spurious dependencies.
R=mstarzinger@chromium.org
BUG=
Review URL: https://codereview.chromium.org/1481613002
Cr-Commit-Position: refs/heads/master@{#32351}
ES6 section 12.2.8.1 states that flags for regular expression literals
must be checked during parsing and invalid flags are early errors. This
change adapts the Scanner and (Pre)Parser to act according to the spec.
This is also a prerequisite to unify the handling of literal creation
(for Objects, Arrays, Regexps, and at some point Classes).
R=yangguo@chromium.org
Review URL: https://codereview.chromium.org/1472323002
Cr-Commit-Position: refs/heads/master@{#32273}
This passes the new.target value in a register instead of through a
side-channel via the construct stub. The interpreter entry trampoline
stores this value in a bytecode register so that it can be accessed
directly by the interpreter. The size of the interpreter stack frame
hence grows by one slot.
R=oth@chromium.org
BUG=v8:4544
LOG=n
Review URL: https://codereview.chromium.org/1469313002
Cr-Commit-Position: refs/heads/master@{#32264}
This is the initial step towards refactoring the regexp literation
creation code to make it less obscure and more similar to the mechanism
we use to create array and object literals. There's now a new runtime
entry %CreateRegExpLiteral with the same interface as the entries for
array and object literals, except that we still pass the flags as
string.
Instead of embedding the hand written native to clone JSRegExp instances
we now have a FastCloneRegExpStub, which behaves similar to the other
FastCloneShallowArrayStub and FastCloneShallowObjectStub that we already
had.
R=mlippautz@chromium.org, yangguo@chromium.org
Review URL: https://codereview.chromium.org/1475823003
Cr-Commit-Position: refs/heads/master@{#32255}
Adds code and tests to support CreateClosure bytecode when building
graphs.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1458603012
Cr-Commit-Position: refs/heads/master@{#32224}
Change the runtime entries and their associated code stubs for object
and array literal creation to take the closure instead of the raw
literals pointer. This is way easier to deal with (and cleaner) in
TurboFan.
R=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1469833005
Cr-Commit-Position: refs/heads/master@{#32220}
This change introduces register re-mapping to avoid assignment hazards
in binary expressions. Expressions that cause problems typically have
the form y = x + (x = 4);. The problem occurs because the lhs value
evaluates to the register holding x. The rhs updates that register and
then applying the operation would use the new value as the lhs.
By tracking loads and stores in binary expressions the generator is now
able to detect when condition occurs and uses a temporary register for
the rhs value. When the binary expression evaluation is complete the
variable is updated with the latest temporary.
A new bytecode Mov performs this update without touching the
accumulator.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1412683011
Cr-Commit-Position: refs/heads/master@{#32141}
Adds support for the New, CallRuntime and CallJSRuntime bytecodes in
BytecodeGraphBuilder. Also adds BuildLoadObjectField,
BuildLoadGlobalObject and BuildLoadNativeContextField helpers.
Landed on behalf of rmcilroy.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1456483002
Cr-Commit-Position: refs/heads/master@{#32136}
Adds support for visiting the Call bytecode to the bytecode graph builder.
This change also adds the call type feedback slot to the Call bytecode.
This is not currently used by the interpreter, but is used by the
graph builder.
Also adds a CallWide varient of the Call bytecode, and adds the kCount16
operand type.
Landed on behalf of rmcilroy.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1456453002
Cr-Commit-Position: refs/heads/master@{#32033}
Adds implementation and tests for following operators in bytecode graph builder:
-VisitLoadICSloppy
-VisitLoadICStrict
-VisitLoadICSloppyWide
-VisitLoadICStrictWide
The current implementation introduces empty frame states for frame state inputs expected by these operations.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1419373007
Cr-Commit-Position: refs/heads/master@{#32026}
Adds an optimization to omit generating Ldar/Star if the same register
is loaded or stored from the accumulator in the earlier instruction.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1435283002
Cr-Commit-Position: refs/heads/master@{#31984}
This aligns the naming of "new target" with the spec text throughout
TurboFan and the stack frame walker. The goal is to avoid unnecessary
confusion for people familiar with the spec.
R=verwaest@chromium.org
Review URL: https://codereview.chromium.org/1442643002
Cr-Commit-Position: refs/heads/master@{#31978}
On MIPS arch, all memory accesses (including halfword)
must be aligned to their native size or an alignment exception occurs.
The kernel will fix this up, but with performance penalty.
TEST=test-bytecode-generator/CallRuntime
BUG=
Review URL: https://codereview.chromium.org/1423373004
Cr-Commit-Position: refs/heads/master@{#31845}
Adds support for calling JS runtime functions. Also changes the bytecode
array builder to allow calling functions with an invalid argument
register if the call takes no arguments.
Adds the bytecode CallJSRuntime.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1410003003
Cr-Commit-Position: refs/heads/master@{#31774}
Corrects LdaGlobal to deal with TypeofMode::INSIDE_TYPEOF so that it
doesn't throw a reference error on undefined globals.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1422443006
Cr-Commit-Position: refs/heads/master@{#31757}
Existing code was assuming that 'lexical' blocks were the same as basic
blocks, therefore code which emitted jumps within a lexical block (e.g.,
logical or) would in some occassions incorrectly omit a necessary
ToBoolean.
This change removes Enter/LeaveBlock from BytecodeArrayBuilder and
instead tracks basic blocks via label bindings and jump operations. The
change also ensures we don't emit dead code at the end of a basic block,
and adds tests of the edge cases.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1406983010
Cr-Commit-Position: refs/heads/master@{#31741}
Adds an optimization to not emit unnecessary jumps and dead code in If,
For, While, and do-while statments. When the value of condition is known
at compile time, the code is emitted only for the paths that can be taken.
For example, when the condition is known to be true in an if statmenet
only then block is generated.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1414193006
Cr-Commit-Position: refs/heads/master@{#31715}
Adds an optimization to emit JumpIfToBooleanTrue/False instead
of ToBoolean followed by JumpIfTrue/False if the value in the
accumulator is not boolean.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1426913002
Cr-Commit-Position: refs/heads/master@{#31697}
Adds support for switch statments to the interpreter.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1415093006
Cr-Commit-Position: refs/heads/master@{#31687}
Most use sites of Call::GetCallType already distinguish the property
call case (i.e. formerly known as Call::PROPERTY_CALL) further. This
introduces this distinction to simplify use sites.
R=rossberg@chromium.org
Review URL: https://codereview.chromium.org/1414413004
Cr-Commit-Position: refs/heads/master@{#31663}
For..in introduces 3 new bytecodes ForInPrepare, ForInNext, and
ForInDone to start a for..in loop, get the next element, and check if
the loop is done.
For..in builds upon new LoopBuilder constructs for conditionally
breaking and continuing during iteration: BreakIf{Null|Undefined}
and ContinueIf{Null|Undefined}. New conditional jump bytecodes
support this succinctly: JumpIfNull and JumpIfUndefined.
Add missing check to BytecodeLabel that could allow multiple
forward referencess to the same label which is not supported.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1422033002
Cr-Commit-Position: refs/heads/master@{#31651}
Adds support for delete operator, it's implementation and tests.
Adds tests for the following unary operators
-BitwiseNot
-Add
-Sub
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1410953003
Cr-Commit-Position: refs/heads/master@{#31620}
Adds support for loading from and storing to outer context
variables. Also adds support for declaring functions on contexts and
locals. Finally, fixes a couple of issues with StaContextSlot where
we weren't emitting the write barrier and therefore would crash in the
GC.
Also added code so that --print-bytecode will output the
function name before the bytecodes, and replaces MachineType with StoreRepresentation in RawMachineAssembler::Store and updates tests.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1425633002
Cr-Commit-Position: refs/heads/master@{#31584}
Adds support and tests for conditional (ternary) expressions.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1417053004
Cr-Commit-Position: refs/heads/master@{#31575}
Fills out some more of the function prologue support in the
interpreter. Deals with creation of arguments objects and throwing
IllegalRedeclarations if necessary. Also adds (untested) support for
this.function and new.target variable assignment.
Also fixes a bug in Frames::is_java_script() to deal with
interpreter frames correctly.
Cleans up comments in builtins InterpreterEntryTrampoline about
missing prologue support.
Adds the following bytecodes:
- CreateArgumentsSloppy
- CreateArgumentsStrict
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1412953007
Cr-Commit-Position: refs/heads/master@{#31486}
Adds support for compound expressions for variables and named / keyed
property assignments.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1420503002
Cr-Commit-Position: refs/heads/master@{#31485}
Adds support for count operations to the interpreter. Deals with count
operations on locals, globals, context allocated variables and named and
keyed properties.
Adds the following bytecodes:
ToNumber
Inc
Dec
BUG=v8:4280
LOG=N
TBR=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1416623003
Cr-Commit-Position: refs/heads/master@{#31484}
Unifies the global and unallocated variable type accesses given that
--global_var_shortcuts is going away. Lda/StaGlobal is modified to use
Load/StoreICs on the global object. The named LoadIC and StoreIC bytecodes
are also modified so that they take a constant pool entry index for the
name rather than a register, avoiding unecessary LdaConstant bytecodes to
be emitted.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1419003002
Cr-Commit-Position: refs/heads/master@{#31482}
The plan is to implement the same idea using vector IC machinery.
Stubs implementations and scopes modifications are left untouched for now.
Review URL: https://codereview.chromium.org/1419823003
Cr-Commit-Position: refs/heads/master@{#31458}
This change adds new flavors of Visit() methods for obtaining
expression results:
- VisitForAccumulatorValue() which places result in the accumulator.
- VisitForRegisterValue() which places the result in a register.
- VisitForEffect() which evaluates the expression and discards the result.
The targets of these calls place the expression result with
result_scope()->SetResultInRegister() or
result_scope()->SetResultInAccumulator().
By being smarter about result locations, there's less temporary
register usage. However, we now have a hazard with assignments
in binary expressions that didn't exist before. This change detects and
DCHECK's when a hazard is detected. A follow on CL will address this.
There are consequential changes to test-bytecode-generator.cc and
this change also adds new bytecode macros A(x, n) and THIS(n) for
register file entries for arguments and this.
BUG=v8:4280
LOG=NO
Review URL: https://codereview.chromium.org/1392933002
Cr-Commit-Position: refs/heads/master@{#31445}
Adds support for local context loads and stores. Also adds support for
creation of new block contexts (e.g., for let variables) and initializing
const / let variables with the hole appropriately.
Also adds some checks to ensure BytecodeArrayBuilder::context_count is set
appropriately and fixes tests to do so.
Adds the bytecode StaContextSlot.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1403943004
Cr-Commit-Position: refs/heads/master@{#31343}
Adds Scope::MaxNestedContextChainLength() which calculates the maximum length
of the context chain for the given scope. This is used by the interpreter to
preallocate the approprate number of context registers when compiling the
function.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1404793004
Cr-Commit-Position: refs/heads/master@{#31309}
This change add a new bytecode for operator new and implements it using
the Construct() builtin.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1402943002
Cr-Commit-Position: refs/heads/master@{#31293}
This adds a bit of boilerplate to some AstVisitors (they now have to
declare their own zone_ member and zone() accessor), but makes it clearer
what DEFINE_AST_VISITOR_SUBCLASS_MEMBERS is for: stack limit checking.
Review URL: https://codereview.chromium.org/1394303008
Cr-Commit-Position: refs/heads/master@{#31287}
Adds support for following operators
-Logical and
-Logical or
-Comma
Adds the above bytecodes, support to BytecodeGenerator and BytecodeArrayBuilder
to enable it's use, it's implementation and tests.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1399773002
Cr-Commit-Position: refs/heads/master@{#31281}
Replaces the use of KeyedStoreICGeneric with a vector based KeyedStoreIC for
array literal computed stores now that there is a feedback vector slot for
these expressions. Removes KeyedStoreICGeneric bytecode since this is no
longer necessary.
BUG=v8:4280
LOG=N
TBR=mstarzinger@chromium.org
Review URL: https://codereview.chromium.org/1400353002
Cr-Commit-Position: refs/heads/master@{#31262}
Previously, any AstVisitor subclasses which wanted to make use of
the shared stack overflow checking code needed to depend on Isolate.
With this patch, it will be easy to create a second InitializeAstVisitor
overload taking a stack_limit directly, for use in code that has no
Isolate available (such as code running in the parser).
AstVisitor subclasses which depended upon the isolate() accessor have
been fixed to either have their own isolate_ member or get it from
somewhere else convenient.
Review URL: https://codereview.chromium.org/1387383005
Cr-Commit-Position: refs/heads/master@{#31260}
It is used by AstGraphBuilder (TF) and BytecodeGenerator (Ignition), so is no
longer a full-codegen datastructure. Removes full-codegen.h dependency from
compiler/ and interpreter/
Review URL: https://codereview.chromium.org/1393393003
Cr-Commit-Position: refs/heads/master@{#31256}
Adds Object literal support to the interpreter. Adds the following bytecodes:
- ToName
- CreateObjectLiteral.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1386313005
Cr-Commit-Position: refs/heads/master@{#31253}
Adds array literal support to the interpreter. Currently constructed
array elements don't have type feedback slots, so also adds support for
generic keyed store operations.
Adds the following bytecodes:
- CreateArrayLiteral
- KeyedStoreICGeneric
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1400753003
Cr-Commit-Position: refs/heads/master@{#31240}
Adds support for creation of new local function contexts (or script context for
top-level code). As part of this, also adds support for context push/pop
operations using a ContextScope object in BytecodeGenerator. Adds the following
bytecodes:
- PushContext
- PopContext
Support for inner contexts and loading from / storing to context allocated
variables will come in a future CL.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1379793004
Cr-Commit-Position: refs/heads/master@{#31238}
Adds function literal support and add support for OTHER_CALLS which can be
made when calling a function literal.
Adds the CreateClosure bytecode.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1396693003
Cr-Commit-Position: refs/heads/master@{#31231}
-Bitwise Or
-Bitwise Xor
-Bitwise And
Adds the above bytecodes, support to BytecodeGenerator and BytecodeArrayBuilder to enable it's use, it's implementation and tests.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1386133002
Cr-Commit-Position: refs/heads/master@{#31210}
Adds support for following operators
-Shift left
-Shift right
-Shift right logical
Adds the above bytecodes, support to BytecodeGenerator and BytecodeArrayBuilder
to enable it's use, it's implementation and tests.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1392913002
Cr-Commit-Position: refs/heads/master@{#31205}
Implements support for declaring global variables. Also adds support for loading
from and storing to both global and unallocated global variables. Adds the
following bytecodes:
- StoreGlobal
- LoadContextSlot
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1378523005
Cr-Commit-Position: refs/heads/master@{#31166}
Adds support for compiling top level code to bytecode to be run in the
interpreter.
Also moves PassesFilter to String:: so that it can be used to filter top
level script names as well as functions (used in
https://codereview.chromium.org/1379093002/)
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1372293005
Cr-Commit-Position: refs/heads/master@{#31142}
Adds support for strict mode load / store ICs and cleans up BinaryOp and
CompareOp to only trigger an UNIMPLEMENTED abort if called with STRONG
mode (which is the only language mode which has different compare/binary ops.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1385623002
Cr-Commit-Position: refs/heads/master@{#31134}
Implementations and tests for typeof, void, and logical not.
Add missing string type to Object::TypeOf.
BUG=v8:4280
LOG=NO
Review URL: https://codereview.chromium.org/1390483002
Cr-Commit-Position: refs/heads/master@{#31124}
Adds support for calling runtime functions from the interpreter. Adds the
CallRuntime bytecode which takes a Runtime::FunctionId of the function to call
and the arguments in sequential registers. Adds a InterpreterCEntry builtin
to enable the interpreter to enter C++ code based on the functionId.
Also renames Builtin::PushArgsAndCall to Builtin::InterpreterPushArgsAndCall
and groups all the interpreter builtins together.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1362383002
Cr-Commit-Position: refs/heads/master@{#31089}
Reason for revert:
Now breaking arm32 debug bot (worked locally even with --debug-code, so I'll need to figure out what's different on the bot)
Original issue's description:
> [Interpreter] Add CallRuntime support to the interpreter.
>
> Adds support for calling runtime functions from the interpreter. Adds the
> CallRuntime bytecode which takes a Runtime::FunctionId of the function to call
> and the arguments in sequential registers. Adds a InterpreterCEntry builtin
> to enable the interpreter to enter C++ code based on the functionId.
>
> Also renames Builtin::PushArgsAndCall to Builtin::InterpreterPushArgsAndCall
> and groups all the interpreter builtins together.
>
> BUG=v8:4280
> LOG=N
>
TBR=bmeurer@chromium.org,oth@chromium.org,mstarzinger@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280
Review URL: https://codereview.chromium.org/1379933003
Cr-Commit-Position: refs/heads/master@{#31078}
Adds support for calling runtime functions from the interpreter. Adds the
CallRuntime bytecode which takes a Runtime::FunctionId of the function to call
and the arguments in sequential registers. Adds a InterpreterCEntry builtin
to enable the interpreter to enter C++ code based on the functionId.
Also renames Builtin::PushArgsAndCall to Builtin::InterpreterPushArgsAndCall
and groups all the interpreter builtins together.
BUG=v8:4280
LOG=N
Committed: https://crrev.com/40e8424b744f8b6e3e1d93e20f23487419911dfc
Cr-Commit-Position: refs/heads/master@{#31064}
Review URL: https://codereview.chromium.org/1362383002
Cr-Commit-Position: refs/heads/master@{#31076}
Reason for revert:
Broke Arm64 bot (CEntry stub is trying to pop arguments off stack when argv_in_reg, so I need to fix this).
Original issue's description:
> [Interpreter] Add CallRuntime support to the interpreter.
>
> Adds support for calling runtime functions from the interpreter. Adds the
> CallRuntime bytecode which takes a Runtime::FunctionId of the function to call
> and the arguments in sequential registers. Adds a InterpreterCEntry builtin
> to enable the interpreter to enter C++ code based on the functionId.
>
> Also renames Builtin::PushArgsAndCall to Builtin::InterpreterPushArgsAndCall
> and groups all the interpreter builtins together.
>
> BUG=v8:4280
> LOG=N
>
> Committed: https://crrev.com/40e8424b744f8b6e3e1d93e20f23487419911dfc
> Cr-Commit-Position: refs/heads/master@{#31064}
TBR=bmeurer@chromium.org,oth@chromium.org,mstarzinger@chromium.org
NOPRESUBMIT=true
NOTREECHECKS=true
NOTRY=true
BUG=v8:4280
Review URL: https://codereview.chromium.org/1387543002
Cr-Commit-Position: refs/heads/master@{#31066}
Adds support for calling runtime functions from the interpreter. Adds the
CallRuntime bytecode which takes a Runtime::FunctionId of the function to call
and the arguments in sequential registers. Adds a InterpreterCEntry builtin
to enable the interpreter to enter C++ code based on the functionId.
Also renames Builtin::PushArgsAndCall to Builtin::InterpreterPushArgsAndCall
and groups all the interpreter builtins together.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1362383002
Cr-Commit-Position: refs/heads/master@{#31064}
Adds support for short operands, starting with kIdx16. Introduces
BytecodeTraits to enable compile time determination of various traits for a
bytecode, such as size, operands, etc. Reworks BytecodeIterator,
BytecodeArrayBuilder and Bytecodes::Decode to support 16 bit operands. Adds
support to Interpreter to load 16 bit operands.
Also fixes a bug with ToBoolean where it wouldn't get emitted at the start
of a block, and added a test.
BytecodeTraits template magic inspired by oth@chromium.org.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1370893002
Cr-Commit-Position: refs/heads/master@{#31058}
Improve bytecode generation for if when there's no else clause.
Display target addresses for jump instructions in
Bytecode::Disassemble().
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1373903005
Cr-Commit-Position: refs/heads/master@{#31052}
This CL also allows to use arbitrary number of feedback vector elements for particular slot kind.
Review URL: https://codereview.chromium.org/1370303004
Cr-Commit-Position: refs/heads/master@{#31050}
The comparison operators and ToBoolean are implemented by calling into
the runtime. There are new runtime methods are prefixed with Interpreter
to make use case clear.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1369123002
Cr-Commit-Position: refs/heads/master@{#30983}
+ Add bytecodes for conditional and unconditional jumps.
+ Add bytecodes for test/compare operations.
+ Expose jumps in bytecode-array-builder and add BytecodeLabel class for
identifying jump targets.
+ Add support for if..then...else in the bytecode-generator.
+ Implement jump bytecodes in the interpreter. Test/compare operations
dependent on runtime call for comparisons.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1343363002
Cr-Commit-Position: refs/heads/master@{#30918}
Adds LdaGlobal bytecode and augments BytecodeGenerator to load globals for
global variables and function calls.
Modified TestBytecodeGenerator to add the ability to specify that a bytecode
operand has an unknown value (used so we don't need to figure out the slot
index of a global). Also added a helper which checks equality of BytecodeArray
with the expected snipptets.
Modified TestInterpreter to allow it to take snippets of JS and have the
BytecodeGenerator generate the bytecode rather than having to build a
BytecodeArray manually. This is used to enable the global tests.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1361113002
Cr-Commit-Position: refs/heads/master@{#30910}
ES2015 specifies very particular semantics for functions defined in blocks.
In strict mode, it is simply a lexical binding scoped to that block. In sloppy
mode, in addition to that lexical binding, there is a var-style binding in
the outer scope, which is overwritten with the local binding when the function
declaration is evaluated, *as long as* introducing ths var binding would not
create a var/let conflict in the outer scope.
This patch implements the semantics by introducing a DelegateStatement, which
is initially filled in with the EmptyStatement and overwritten with the
assignment when the scope is closed out and it can be checked that there is
no conflict.
This patch is tested with a new mjsunit test, and I tried staging it and running
test262, finding that the tests that we have disabled due to lack of Annex B
support now pass.
R=adamk,rossberg
LOG=Y
BUG=v8:4285
Review URL: https://codereview.chromium.org/1332873003
Cr-Commit-Position: refs/heads/master@{#30842}
Adds support for JS calls to the interpreter. In order to support
calls from the interpreter, the PushArgsAndCall builtin is added
which pushes a sequence of arguments onto the stack and calls
builtin::Call.
Adds the Call bytecode.
MIPS port contributed by akos.palfi@imgtec.com in https://codereview.chromium.org/1334873002/
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1323463005
Cr-Commit-Position: refs/heads/master@{#30710}
Replace the ADD, SUB, etc. builtins with proper runtime implementations,
and expose them as runtime calls that can be used by the code stubs and
the interpreter (for now).
Also remove all the support runtime functions for ADD, SUB and friends,
namely %NumberAdd, %NumberSub, and so on.
R=mstarzinger@chromium.org
CQ_INCLUDE_TRYBOTS=tryserver.v8:v8_linux_layout_dbg,v8_linux_nosnap_dbg
Review URL: https://codereview.chromium.org/1333843002
Cr-Commit-Position: refs/heads/master@{#30680}
Adds support for property store operations via Store/KeyedStore ICs. Adds the
following bytecodes:
- StoreIC
- KeyedStoreIC
The --vector_store flag is now required for --ignition.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1319833004
Cr-Commit-Position: refs/heads/master@{#30660}
When there is no explicit return we need to generate an implicit
return undefined.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1308693014
Cr-Commit-Position: refs/heads/master@{#30639}
Add methods for converting parameter index to a register and vice-versa.
Move Register class into bytecodes.h.
Update Bytecodes::Decode to pretty print parameters.
BUG=v8:4280
LOG=NO
Review URL: https://codereview.chromium.org/1325983002
Cr-Commit-Position: refs/heads/master@{#30549}
Adds support for property load operations via Load/KeyedLoad ICs. Adds the
following bytecodes:
- LoadIC
- KeyedLoadIC
Also adds support to the interpreter assembler for loading the type feedback
vector from the function on the stack, and calling ICs.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1309843007
Cr-Commit-Position: refs/heads/master@{#30543}
The usage of Unique<T> throughout the TurboFan IR does not have any
advantage. There is no single point in time when they are initialized
and most use-sites looked through to the underlying Handle<T> anyways.
Also there already was a mixture of Handle<T> versus Unique<T> in the
graph and this unifies the situation to use Handle<T> everywhere.
R=bmeurer@chromium.org,titzer@chromium.org
Review URL: https://codereview.chromium.org/1314473007
Cr-Commit-Position: refs/heads/master@{#30458}
Adds support to the interpreter for loading literals from the constant pool.
Adds the LoadConstant bytecode and makes use of it for loading large Smis and
HeapObject literals.
Also removes unused HandleVector from utils.h.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1321663003
Cr-Commit-Position: refs/heads/master@{#30450}
Adds a (currently unused) constant_pool() field to BytecodeArray objects.
This field points to a FixedArray object which will be used to hold constants.
The BytecodeArray is now a mixed values object type, with the
kConstantPoolOffset object holding a tagged pointer, but the remainder of the
object holding raw bytes (which could look like tagged pointers but are not).
Modify the BytecodeArray GC visitors to deal with this and test that the
field is migrated properly when evacuated.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1314953004
Cr-Commit-Position: refs/heads/master@{#30404}
Adds support for parameters to the BytecodeArrayBuilder and BytecodeGenerator.
Parameters are accessed as negative interpreter registers.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1303403004
Cr-Commit-Position: refs/heads/master@{#30403}
Adds implementations and tests for the following bytecodes:
- Add
- Sub
- Mul
- Div
- Mod
Also adds the Mod bytecode and adds support to BytecodeGenerator and
BytecodeArrayBuilder to enable it's use.
The current bytecodes always call through to the JS builtins. This also adds
LoadObjectField and CallJSBuiltin operators to the InterpreterAssembler.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1300813005
Cr-Commit-Position: refs/heads/master@{#30352}
Bytecode generator for local assignment and basic binary operations.
Command-line flag for printing bytecodes.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1294543002
Cr-Commit-Position: refs/heads/master@{#30221}
Modifies the BytecodeArrayBuilder to create register operands which are
negative. This reduces the number of instructions to access registers
by the interpreter and allows us to use positive register operands to
access parameter values.
Adds a Register class to keep register usage typesafe and simplify the
convertion to bytecode operand values.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1283313003
Cr-Commit-Position: refs/heads/master@{#30151}
Moves the creation of the interpreter table early on during initialization
to ensure that even on nosnap builds it still gets allocated in the
first page.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1278413002
Cr-Commit-Position: refs/heads/master@{#30096}
Change minimum BytecodeArray frame size to zero now return value is in
the accumulator.
Fix inconsistent checks in bytecode-array-builder.cc.
Simplify bytecode disassembly by adding Bytecodes::Decode to
disassemble one bytecode and operands.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1259193004
Cr-Commit-Position: refs/heads/master@{#29988}
The BytecodeArrayBuilder has responsibility for emitting the BytecodeArray. It will be used by the AST walker.
Bytecode now uses an accumulator plus registers rather being pure register based.
Update BytecodeArray::Disassemble to print operand information.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1266713004
Cr-Commit-Position: refs/heads/master@{#29970}
Adds interpreter entry and exit trampoline builtins. Also implements the
Return bytecode handler and fixes a few bugs in InterpreterAssembler
highlighted by running on other architectures.
MIPS and MIPS64 port contributed by Paul Lind (paul.lind@imgtec.com)
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1245133002
Cr-Commit-Position: refs/heads/master@{#29929}
Changes the interpreter to use a BytecodeArray pointer and an offset to avoid
having an inner pointer to a BytecodeArray object in registers during dispatch.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1254293006
Cr-Commit-Position: refs/heads/master@{#29910}
- Ensure frame_size is always set during allocation.
- Add DCHECKs that frame_size is a valid value
- Remove locals_count, which we don't need yet (possibly every)
- Add a newline at the end of BytecodeArray::Dissassemble
for each bytecode.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1254873002
Cr-Commit-Position: refs/heads/master@{#29852}
Adds basic support for generation of interpreter bytecode handler code
snippets. The InterpreterAssembler class exposes a set of low level,
interpreter specific operations which can be used to build a Turbofan
graph. The Interpreter class generates a bytecode handler snippet for
each bytecode by assembling operations using an InterpreterAssembler.
Currently only two simple bytecodes are supported: LoadLiteral0 and Return.
BUG=v8:4280
LOG=N
Review URL: https://codereview.chromium.org/1239793002
Cr-Commit-Position: refs/heads/master@{#29814}
