AuroraMiddleware/v8
1
0
Fork 0
Code Issues 2 Pull Requests Releases Wiki Activity
839588d411
v8/Makefile
jochen@chromium.org 04eefb86f4 Roll ICU 239289:258359 and add support for external ICU data tables 
The only binary that supports ICU data tables is d8. The location of the
data table file has to be passed via a command line switch:

  $ out/x64.optdebug/d8 --icu-data-file=out/x64.optdebug/icudtl.dat

BUG=72633,v8:3142
R=danno@chromium.org
LOG=y

Review URL: https://codereview.chromium.org/209323014

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@20239 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
2014-03-25 12:05:33 +00:00

469 lines
16 KiB
Makefile
Raw Blame History

# Copyright 2012 the V8 project authors. All rights reserved.
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
#
# * Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# * Redistributions in binary form must reproduce the above
# copyright notice, this list of conditions and the following
# disclaimer in the documentation and/or other materials provided
# with the distribution.
# * Neither the name of Google Inc. nor the names of its
# contributors may be used to endorse or promote products derived
# from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
# Variable default definitions. Override them by exporting them in your shell.
CXX ?= g++
LINK ?= g++
OUTDIR ?= out
TESTJOBS ?=
GYPFLAGS ?=
TESTFLAGS ?=
ANDROID_NDK_ROOT ?=
ANDROID_NDK_HOST_ARCH ?=
ANDROID_TOOLCHAIN ?=
ANDROID_V8 ?= /data/local/tmp/v8
NACL_SDK_ROOT ?=
# Special build flags. Use them like this: "make library=shared"
# library=shared || component=shared_library
ifeq ($(library), shared)
GYPFLAGS += -Dcomponent=shared_library
endif
ifdef component
GYPFLAGS += -Dcomponent=$(component)
endif
# console=readline
ifdef console
GYPFLAGS += -Dconsole=$(console)
endif
# disassembler=on
ifeq ($(disassembler), on)
GYPFLAGS += -Dv8_enable_disassembler=1
endif
# objectprint=on
ifeq ($(objectprint), on)
GYPFLAGS += -Dv8_object_print=1
endif
# verifyheap=on
ifeq ($(verifyheap), on)
GYPFLAGS += -Dv8_enable_verify_heap=1
endif
# backtrace=off
ifeq ($(backtrace), off)
GYPFLAGS += -Dv8_enable_backtrace=0
else
GYPFLAGS += -Dv8_enable_backtrace=1
endif
# snapshot=off
ifeq ($(snapshot), off)
GYPFLAGS += -Dv8_use_snapshot='false'
endif
# extrachecks=on/off
ifeq ($(extrachecks), on)
GYPFLAGS += -Dv8_enable_extra_checks=1 -Dv8_enable_handle_zapping=1
endif
ifeq ($(extrachecks), off)
GYPFLAGS += -Dv8_enable_extra_checks=0 -Dv8_enable_handle_zapping=0
endif
# gdbjit=on/off
ifeq ($(gdbjit), on)
GYPFLAGS += -Dv8_enable_gdbjit=1
endif
ifeq ($(gdbjit), off)
GYPFLAGS += -Dv8_enable_gdbjit=0
endif
# vtunejit=on
ifeq ($(vtunejit), on)
GYPFLAGS += -Dv8_enable_vtunejit=1
endif
# optdebug=on
ifeq ($(optdebug), on)
GYPFLAGS += -Dv8_optimized_debug=2
endif
# debuggersupport=off
ifeq ($(debuggersupport), off)
GYPFLAGS += -Dv8_enable_debugger_support=0
endif
# unalignedaccess=on
ifeq ($(unalignedaccess), on)
GYPFLAGS += -Dv8_can_use_unaligned_accesses=true
endif
# randomseed=12345, disable random seed via randomseed=0
ifdef randomseed
GYPFLAGS += -Dv8_random_seed=$(randomseed)
endif
# soname_version=1.2.3
ifdef soname_version
GYPFLAGS += -Dsoname_version=$(soname_version)
endif
# werror=no
ifeq ($(werror), no)
GYPFLAGS += -Dwerror=''
endif
# presubmit=no
ifeq ($(presubmit), no)
TESTFLAGS += --no-presubmit
endif
# strictaliasing=off (workaround for GCC-4.5)
ifeq ($(strictaliasing), off)
GYPFLAGS += -Dv8_no_strict_aliasing=1
endif
# regexp=interpreted
ifeq ($(regexp), interpreted)
GYPFLAGS += -Dv8_interpreted_regexp=1
endif
# i18nsupport=off
ifeq ($(i18nsupport), off)
GYPFLAGS += -Dv8_enable_i18n_support=0
TESTFLAGS += --noi18n
endif
# deprecation_warnings=on
ifeq ($(deprecationwarnings), on)
GYPFLAGS += -Dv8_deprecation_warnings=1
endif
# arm specific flags.
# arm_version=<number | "default">
ifneq ($(strip $(arm_version)),)
GYPFLAGS += -Darm_version=$(arm_version)
else
# Deprecated (use arm_version instead): armv7=false/true
ifeq ($(armv7), false)
GYPFLAGS += -Darm_version=6
else
ifeq ($(armv7), true)
GYPFLAGS += -Darm_version=7
endif
endif
endif
# vfp2=off. Deprecated, use armfpu=
# vfp3=off. Deprecated, use armfpu=
ifeq ($(vfp3), off)
GYPFLAGS += -Darm_fpu=vfp
endif
# hardfp=on/off. Deprecated, use armfloatabi
ifeq ($(hardfp),on)
GYPFLAGS += -Darm_float_abi=hard
else
ifeq ($(hardfp),off)
GYPFLAGS += -Darm_float_abi=softfp
endif
endif
# armneon=on/off
ifeq ($(armneon), on)
GYPFLAGS += -Darm_neon=1
endif
# fpu: armfpu=xxx
# xxx: vfp, vfpv3-d16, vfpv3, neon.
ifeq ($(armfpu),)
ifneq ($(vfp3), off)
GYPFLAGS += -Darm_fpu=default
endif
else
GYPFLAGS += -Darm_fpu=$(armfpu)
endif
# float abi: armfloatabi=softfp/hard
ifeq ($(armfloatabi),)
ifeq ($(hardfp),)
GYPFLAGS += -Darm_float_abi=default
endif
else
GYPFLAGS += -Darm_float_abi=$(armfloatabi)
endif
# armthumb=on/off
ifeq ($(armthumb), off)
GYPFLAGS += -Darm_thumb=0
else
ifeq ($(armthumb), on)
GYPFLAGS += -Darm_thumb=1
endif
endif
# armtest=on
# With this flag set, by default v8 will only use features implied
# by the compiler (no probe). This is done by modifying the default
# values of enable_armv7, enable_vfp2, enable_vfp3 and enable_32dregs.
# Modifying these flags when launching v8 will enable the probing for
# the specified values.
# When using the simulator, this flag is implied.
ifeq ($(armtest), on)
GYPFLAGS += -Darm_test=on
endif
# ----------------- available targets: --------------------
# - "dependencies": pulls in external dependencies (currently: GYP)
# - "grokdump": rebuilds heap constants lists used by grokdump
# - any arch listed in ARCHES (see below)
# - any mode listed in MODES
# - every combination <arch>.<mode>, e.g. "ia32.release"
# - "native": current host's architecture, release mode
# - any of the above with .check appended, e.g. "ia32.release.check"
# - "android": cross-compile for Android/ARM
# - "nacl" : cross-compile for Native Client (ia32 and x64)
# - default (no target specified): build all DEFAULT_ARCHES and MODES
# - "check": build all targets and run all tests
# - "<arch>.clean" for any <arch> in ARCHES
# - "clean": clean all ARCHES
# ----------------- internal stuff ------------------------
# Architectures and modes to be compiled. Consider these to be internal
# variables, don't override them (use the targets instead).
ARCHES = ia32 x64 arm arm64 mipsel
DEFAULT_ARCHES = ia32 x64 arm
MODES = release debug optdebug
DEFAULT_MODES = release debug
ANDROID_ARCHES = android_ia32 android_arm android_arm64 android_mipsel
NACL_ARCHES = nacl_ia32 nacl_x64
# List of files that trigger Makefile regeneration:
GYPFILES = build/all.gyp build/features.gypi build/standalone.gypi \
build/toolchain.gypi samples/samples.gyp src/d8.gyp \
test/cctest/cctest.gyp tools/gyp/v8.gyp
# If vtunejit=on, the v8vtune.gyp will be appended.
ifeq ($(vtunejit), on)
GYPFILES += src/third_party/vtune/v8vtune.gyp
endif
# Generates all combinations of ARCHES and MODES, e.g. "ia32.release".
BUILDS = $(foreach mode,$(MODES),$(addsuffix .$(mode),$(ARCHES)))
ANDROID_BUILDS = $(foreach mode,$(MODES), \
$(addsuffix .$(mode),$(ANDROID_ARCHES)))
NACL_BUILDS = $(foreach mode,$(MODES), \
$(addsuffix .$(mode),$(NACL_ARCHES)))
# Generates corresponding test targets, e.g. "ia32.release.check".
CHECKS = $(addsuffix .check,$(BUILDS))
QUICKCHECKS = $(addsuffix .quickcheck,$(BUILDS))
ANDROID_CHECKS = $(addsuffix .check,$(ANDROID_BUILDS))
NACL_CHECKS = $(addsuffix .check,$(NACL_BUILDS))
# File where previously used GYPFLAGS are stored.
ENVFILE = $(OUTDIR)/environment
.PHONY: all check clean dependencies $(ENVFILE).new native \
qc quickcheck $(QUICKCHECKS) \
$(addsuffix .quickcheck,$(MODES)) $(addsuffix .quickcheck,$(ARCHES)) \
$(ARCHES) $(MODES) $(BUILDS) $(CHECKS) $(addsuffix .clean,$(ARCHES)) \
$(addsuffix .check,$(MODES)) $(addsuffix .check,$(ARCHES)) \
$(ANDROID_ARCHES) $(ANDROID_BUILDS) $(ANDROID_CHECKS) \
must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN \
$(NACL_ARCHES) $(NACL_BUILDS) $(NACL_CHECKS) \
must-set-NACL_SDK_ROOT
# Target definitions. "all" is the default.
all: $(DEFAULT_MODES)
# Special target for the buildbots to use. Depends on $(OUTDIR)/Makefile
# having been created before.
buildbot:
$(MAKE) -C "$(OUTDIR)" BUILDTYPE=$(BUILDTYPE) \
builddir="$(abspath $(OUTDIR))/$(BUILDTYPE)"
mips mips.release mips.debug:
@echo "V8 does not support big-endian MIPS builds at the moment," \
"please use little-endian builds (mipsel)."
# Compile targets. MODES and ARCHES are convenience targets.
.SECONDEXPANSION:
$(MODES): $(addsuffix .$$@,$(DEFAULT_ARCHES))
$(ARCHES): $(addprefix $$@.,$(DEFAULT_MODES))
# Defines how to build a particular target (e.g. ia32.release).
$(BUILDS): $(OUTDIR)/Makefile.$$@
@$(MAKE) -C "$(OUTDIR)" -f Makefile.$@ \
CXX="$(CXX)" LINK="$(LINK)" \
BUILDTYPE=$(shell echo $(subst .,,$(suffix $@)) | \
python -c "print \
raw_input().replace('opt', '').capitalize()") \
builddir="$(shell pwd)/$(OUTDIR)/$@"
native: $(OUTDIR)/Makefile.native
@$(MAKE) -C "$(OUTDIR)" -f Makefile.native \
CXX="$(CXX)" LINK="$(LINK)" BUILDTYPE=Release \
builddir="$(shell pwd)/$(OUTDIR)/$@"
$(ANDROID_ARCHES): $(addprefix $$@.,$(MODES))
$(ANDROID_BUILDS): $(GYPFILES) $(ENVFILE) build/android.gypi \
must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN Makefile.android
@$(MAKE) -f Makefile.android $@ \
ARCH="$(basename $@)" \
MODE="$(subst .,,$(suffix $@))" \
OUTDIR="$(OUTDIR)" \
GYPFLAGS="$(GYPFLAGS)"
$(NACL_ARCHES): $(addprefix $$@.,$(MODES))
$(NACL_BUILDS): $(GYPFILES) $(ENVFILE) \
Makefile.nacl must-set-NACL_SDK_ROOT
@$(MAKE) -f Makefile.nacl $@ \
ARCH="$(basename $@)" \
MODE="$(subst .,,$(suffix $@))" \
OUTDIR="$(OUTDIR)" \
GYPFLAGS="$(GYPFLAGS)"
# Test targets.
check: all
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch=$(shell echo $(DEFAULT_ARCHES) | sed -e 's/ /,/g') \
$(TESTFLAGS)
$(addsuffix .check,$(MODES)): $$(basename $$@)
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--mode=$(basename $@) $(TESTFLAGS)
$(addsuffix .check,$(ARCHES)): $$(basename $$@)
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch=$(basename $@) $(TESTFLAGS)
$(CHECKS): $$(basename $$@)
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch-and-mode=$(basename $@) $(TESTFLAGS)
$(addsuffix .quickcheck,$(MODES)): $$(basename $$@)
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--mode=$(basename $@) $(TESTFLAGS) --quickcheck
$(addsuffix .quickcheck,$(ARCHES)): $$(basename $$@)
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch=$(basename $@) $(TESTFLAGS) --quickcheck
$(QUICKCHECKS): $$(basename $$@)
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch-and-mode=$(basename $@) $(TESTFLAGS) --quickcheck
$(addsuffix .sync, $(ANDROID_BUILDS)): $$(basename $$@)
@tools/android-sync.sh $(basename $@) $(OUTDIR) \
$(shell pwd) $(ANDROID_V8)
$(addsuffix .check, $(ANDROID_BUILDS)): $$(basename $$@).sync
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch-and-mode=$(basename $@) \
--timeout=600 \
--command-prefix="tools/android-run.py" $(TESTFLAGS)
$(addsuffix .check, $(ANDROID_ARCHES)): \
$(addprefix $$(basename $$@).,$(MODES)).check
$(addsuffix .check, $(NACL_BUILDS)): $$(basename $$@)
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch-and-mode=$(basename $@) \
--timeout=600 --nopresubmit --noi18n \
--command-prefix="tools/nacl-run.py"
$(addsuffix .check, $(NACL_ARCHES)): \
$(addprefix $$(basename $$@).,$(MODES)).check
native.check: native
@tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR)/native \
--arch-and-mode=. $(TESTFLAGS)
SUPERFASTTESTMODES = ia32.release
FASTTESTMODES = $(SUPERFASTTESTMODES),x64.release,ia32.optdebug,x64.optdebug,arm.optdebug,arm64.release
FASTCOMPILEMODES = $(FASTTESTMODES),arm64.optdebug
COMMA = ,
EMPTY =
SPACE = $(EMPTY) $(EMPTY)
quickcheck: $(subst $(COMMA),$(SPACE),$(FASTCOMPILEMODES))
tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch-and-mode=$(SUPERFASTTESTMODES) $(TESTFLAGS) --quickcheck \
--download-data mozilla webkit
tools/run-tests.py $(TESTJOBS) --outdir=$(OUTDIR) \
--arch-and-mode=$(FASTTESTMODES) $(TESTFLAGS) --quickcheck
qc: quickcheck
# Clean targets. You can clean each architecture individually, or everything.
$(addsuffix .clean, $(ARCHES) $(ANDROID_ARCHES) $(NACL_ARCHES)):
rm -f $(OUTDIR)/Makefile.$(basename $@)*
rm -rf $(OUTDIR)/$(basename $@).release
rm -rf $(OUTDIR)/$(basename $@).debug
rm -rf $(OUTDIR)/$(basename $@).optdebug
find $(OUTDIR) -regex '.*\(host\|target\)\.$(basename $@).*\.mk' -delete
native.clean:
rm -f $(OUTDIR)/Makefile.native
rm -rf $(OUTDIR)/native
find $(OUTDIR) -regex '.*\(host\|target\)\.native\.mk' -delete
clean: $(addsuffix .clean, $(ARCHES) $(ANDROID_ARCHES) $(NACL_ARCHES)) native.clean
# GYP file generation targets.
OUT_MAKEFILES = $(addprefix $(OUTDIR)/Makefile.,$(BUILDS))
$(OUT_MAKEFILES): $(GYPFILES) $(ENVFILE)
PYTHONPATH="$(shell pwd)/tools/generate_shim_headers:$(PYTHONPATH)" \
PYTHONPATH="$(shell pwd)/build/gyp/pylib:$(PYTHONPATH)" \
GYP_GENERATORS=make \
build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \
-Ibuild/standalone.gypi --depth=. \
-Dv8_target_arch=$(subst .,,$(suffix $(basename $@))) \
$(if $(findstring optdebug,$@),-Dv8_optimized_debug=2,) \
-S$(suffix $(basename $@))$(suffix $@) $(GYPFLAGS)
$(OUTDIR)/Makefile.native: $(GYPFILES) $(ENVFILE)
PYTHONPATH="$(shell pwd)/tools/generate_shim_headers:$(PYTHONPATH)" \
PYTHONPATH="$(shell pwd)/build/gyp/pylib:$(PYTHONPATH)" \
GYP_GENERATORS=make \
build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \
-Ibuild/standalone.gypi --depth=. -S.native $(GYPFLAGS)
must-set-ANDROID_NDK_ROOT_OR_TOOLCHAIN:
ifndef ANDROID_NDK_ROOT
ifndef ANDROID_TOOLCHAIN
$(error ANDROID_NDK_ROOT or ANDROID_TOOLCHAIN must be set))
endif
endif
# Note that NACL_SDK_ROOT must be set to point to an appropriate
# Native Client SDK before using this makefile. You can download
# an SDK here:
# https://developers.google.com/native-client/sdk/download
# The path indicated by NACL_SDK_ROOT will typically end with
# a folder for a pepper version such as "pepper_25" that should
# have "tools" and "toolchain" subdirectories.
must-set-NACL_SDK_ROOT:
ifndef NACL_SDK_ROOT
$(error NACL_SDK_ROOT must be set)
endif
# Replaces the old with the new environment file if they're different, which
# will trigger GYP to regenerate Makefiles.
$(ENVFILE): $(ENVFILE).new
@if test -r $(ENVFILE) && cmp $(ENVFILE).new $(ENVFILE) > /dev/null; \
then rm $(ENVFILE).new; \
else mv $(ENVFILE).new $(ENVFILE); fi
# Stores current GYPFLAGS in a file.
$(ENVFILE).new:
@mkdir -p $(OUTDIR); echo "GYPFLAGS=$(GYPFLAGS)" > $(ENVFILE).new; \
echo "CXX=$(CXX)" >> $(ENVFILE).new
# Heap constants for grokdump.
DUMP_FILE = tools/v8heapconst.py
grokdump: ia32.release
@cat $(DUMP_FILE).tmpl > $(DUMP_FILE)
@$(OUTDIR)/ia32.release/d8 --dump-heap-constants >> $(DUMP_FILE)
# Dependencies.
# Remember to keep these in sync with the DEPS file.
dependencies:
svn checkout --force http://gyp.googlecode.com/svn/trunk build/gyp \
--revision 1831
svn checkout --force \
https://src.chromium.org/chrome/trunk/deps/third_party/icu46 \
third_party/icu --revision 258359
Reference in New Issue View Git Blame Copy Permalink