v8/src/atomicops.h
jkummerow@chromium.org c255fba681 Merge two lines into one for V8_TARGET_ARCH_${arch} and V8_HOST_ARCH_${arch}
R=jkummerow@chromium.org

Review URL: https://codereview.chromium.org/18575003

Patch from Haitao Feng <haitao.feng@intel.com>.

git-svn-id: http://v8.googlecode.com/svn/branches/bleeding_edge@15500 ce2b1a6d-e550-0410-aec6-3dcde31c8c00
2013-07-05 08:15:32 +00:00

171 lines
7.6 KiB
C++

// Copyright 2010 the V8 project authors. All rights reserved.
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
// * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following
// disclaimer in the documentation and/or other materials provided
// with the distribution.
// * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// The routines exported by this module are subtle. If you use them, even if
// you get the code right, it will depend on careful reasoning about atomicity
// and memory ordering; it will be less readable, and harder to maintain. If
// you plan to use these routines, you should have a good reason, such as solid
// evidence that performance would otherwise suffer, or there being no
// alternative. You should assume only properties explicitly guaranteed by the
// specifications in this file. You are almost certainly _not_ writing code
// just for the x86; if you assume x86 semantics, x86 hardware bugs and
// implementations on other archtectures will cause your code to break. If you
// do not know what you are doing, avoid these routines, and use a Mutex.
//
// It is incorrect to make direct assignments to/from an atomic variable.
// You should use one of the Load or Store routines. The NoBarrier
// versions are provided when no barriers are needed:
// NoBarrier_Store()
// NoBarrier_Load()
// Although there are currently no compiler enforcement, you are encouraged
// to use these.
//
#ifndef V8_ATOMICOPS_H_
#define V8_ATOMICOPS_H_
#include "../include/v8.h"
#include "globals.h"
namespace v8 {
namespace internal {
typedef int32_t Atomic32;
#ifdef V8_HOST_ARCH_64_BIT
// We need to be able to go between Atomic64 and AtomicWord implicitly. This
// means Atomic64 and AtomicWord should be the same type on 64-bit.
#if defined(__ILP32__) || defined(__APPLE__)
// MacOS is an exception to the implicit conversion rule above,
// because it uses long for intptr_t.
typedef int64_t Atomic64;
#else
typedef intptr_t Atomic64;
#endif
#endif
// Use AtomicWord for a machine-sized pointer. It will use the Atomic32 or
// Atomic64 routines below, depending on your architecture.
#if defined(__OpenBSD__) && defined(__i386__)
typedef Atomic32 AtomicWord;
#else
typedef intptr_t AtomicWord;
#endif
// Atomically execute:
// result = *ptr;
// if (*ptr == old_value)
// *ptr = new_value;
// return result;
//
// I.e., replace "*ptr" with "new_value" if "*ptr" used to be "old_value".
// Always return the old value of "*ptr"
//
// This routine implies no memory barriers.
Atomic32 NoBarrier_CompareAndSwap(volatile Atomic32* ptr,
Atomic32 old_value,
Atomic32 new_value);
// Atomically store new_value into *ptr, returning the previous value held in
// *ptr. This routine implies no memory barriers.
Atomic32 NoBarrier_AtomicExchange(volatile Atomic32* ptr, Atomic32 new_value);
// Atomically increment *ptr by "increment". Returns the new value of
// *ptr with the increment applied. This routine implies no memory barriers.
Atomic32 NoBarrier_AtomicIncrement(volatile Atomic32* ptr, Atomic32 increment);
Atomic32 Barrier_AtomicIncrement(volatile Atomic32* ptr,
Atomic32 increment);
// These following lower-level operations are typically useful only to people
// implementing higher-level synchronization operations like spinlocks,
// mutexes, and condition-variables. They combine CompareAndSwap(), a load, or
// a store with appropriate memory-ordering instructions. "Acquire" operations
// ensure that no later memory access can be reordered ahead of the operation.
// "Release" operations ensure that no previous memory access can be reordered
// after the operation. "Barrier" operations have both "Acquire" and "Release"
// semantics. A MemoryBarrier() has "Barrier" semantics, but does no memory
// access.
Atomic32 Acquire_CompareAndSwap(volatile Atomic32* ptr,
Atomic32 old_value,
Atomic32 new_value);
Atomic32 Release_CompareAndSwap(volatile Atomic32* ptr,
Atomic32 old_value,
Atomic32 new_value);
void MemoryBarrier();
void NoBarrier_Store(volatile Atomic32* ptr, Atomic32 value);
void Acquire_Store(volatile Atomic32* ptr, Atomic32 value);
void Release_Store(volatile Atomic32* ptr, Atomic32 value);
Atomic32 NoBarrier_Load(volatile const Atomic32* ptr);
Atomic32 Acquire_Load(volatile const Atomic32* ptr);
Atomic32 Release_Load(volatile const Atomic32* ptr);
// 64-bit atomic operations (only available on 64-bit processors).
#ifdef V8_HOST_ARCH_64_BIT
Atomic64 NoBarrier_CompareAndSwap(volatile Atomic64* ptr,
Atomic64 old_value,
Atomic64 new_value);
Atomic64 NoBarrier_AtomicExchange(volatile Atomic64* ptr, Atomic64 new_value);
Atomic64 NoBarrier_AtomicIncrement(volatile Atomic64* ptr, Atomic64 increment);
Atomic64 Barrier_AtomicIncrement(volatile Atomic64* ptr, Atomic64 increment);
Atomic64 Acquire_CompareAndSwap(volatile Atomic64* ptr,
Atomic64 old_value,
Atomic64 new_value);
Atomic64 Release_CompareAndSwap(volatile Atomic64* ptr,
Atomic64 old_value,
Atomic64 new_value);
void NoBarrier_Store(volatile Atomic64* ptr, Atomic64 value);
void Acquire_Store(volatile Atomic64* ptr, Atomic64 value);
void Release_Store(volatile Atomic64* ptr, Atomic64 value);
Atomic64 NoBarrier_Load(volatile const Atomic64* ptr);
Atomic64 Acquire_Load(volatile const Atomic64* ptr);
Atomic64 Release_Load(volatile const Atomic64* ptr);
#endif // V8_HOST_ARCH_64_BIT
} } // namespace v8::internal
// Include our platform specific implementation.
#if defined(THREAD_SANITIZER)
#include "atomicops_internals_tsan.h"
#elif defined(_MSC_VER) && (V8_HOST_ARCH_IA32 || V8_HOST_ARCH_X64)
#include "atomicops_internals_x86_msvc.h"
#elif defined(__APPLE__) && (V8_HOST_ARCH_IA32 || V8_HOST_ARCH_X64)
#include "atomicops_internals_x86_macosx.h"
#elif defined(__GNUC__) && (V8_HOST_ARCH_IA32 || V8_HOST_ARCH_X64)
#include "atomicops_internals_x86_gcc.h"
#elif defined(__GNUC__) && V8_HOST_ARCH_ARM
#include "atomicops_internals_arm_gcc.h"
#elif defined(__GNUC__) && V8_HOST_ARCH_MIPS
#include "atomicops_internals_mips_gcc.h"
#else
#error "Atomic operations are not supported on your platform"
#endif
#endif // V8_ATOMICOPS_H_