Add wxUSE_NATIVE_DATAVIEWCTRL build option

It defaults to 1, but can be set to 0 to force using the generic version
of the control even under GTK or Mac, where the native version is used
by default.

This can, unfortunately, be useful to work around various but multiple
native control limitations.

build/cmake/setup.h.in

@@ -411,6 +411,8 @@
 #cmakedefine01 wxUSE_TREECTRL
 #cmakedefine01 wxUSE_TREELISTCTRL
 
+#cmakedefine01 wxUSE_NATIVE_DATAVIEWCTRL
+
 #cmakedefine01 wxUSE_STATUSBAR
 
 #cmakedefine01 wxUSE_NATIVE_STATUSBAR

configure

@@ -1249,6 +1249,7 @@ enable_combobox
 enable_comboctrl
 enable_commandlinkbutton
 enable_dataviewctrl
+enable_nativedvc
 enable_datepick
 enable_detect_sm
 enable_dirpicker
@@ -2203,6 +2204,7 @@ Optional Features:
   --enable-comboctrl      use wxComboCtrl class
   --enable-commandlinkbutton      use wxCommmandLinkButton class
   --enable-dataviewctrl   use wxDataViewCtrl class
+  --disable-nativedvc     disable use of native wxDataViewCtrl even if available
   --enable-datepick       use wxDatePickerCtrl class
   --enable-detect_sm      use code to detect X11 session manager
   --enable-dirpicker      use wxDirPickerCtrl class
@@ -9719,6 +9721,35 @@ fi
           eval "$wx_cv_use_dataviewctrl"
 
 
+          enablestring=disable
+          defaultval=
+          if test -z "$defaultval"; then
+              if test x"$enablestring" = xdisable; then
+                  defaultval=yes
+              else
+                  defaultval=no
+              fi
+          fi
+
+          # Check whether --enable-nativedvc was given.
+if test "${enable_nativedvc+set}" = set; then :
+  enableval=$enable_nativedvc;
+                          if test "$enableval" = yes; then
+                            wx_cv_use_nativedvc='wxUSE_NATIVE_DATAVIEWCTRL=yes'
+                          else
+                            wx_cv_use_nativedvc='wxUSE_NATIVE_DATAVIEWCTRL=no'
+                          fi
+
+else
+
+                          wx_cv_use_nativedvc='wxUSE_NATIVE_DATAVIEWCTRL=${'DEFAULT_wxUSE_NATIVE_DATAVIEWCTRL":-$defaultval}"
+
+fi
+
+
+          eval "$wx_cv_use_nativedvc"
+
+
           enablestring=
           defaultval=$wxUSE_ALL_FEATURES
           if test -z "$defaultval"; then
@@ -35900,6 +35931,11 @@ if test "$wxUSE_DATAVIEWCTRL" = "yes"; then
 
   USES_CONTROLS=1
   SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS dataview"
+
+  if test "$wxUSE_NATIVE_DATAVIEWCTRL" = "yes"; then
+    $as_echo "#define wxUSE_NATIVE_DATAVIEWCTRL 1" >>confdefs.h
+
+  fi
 fi
 
 if test "$wxUSE_IMAGLIST" = "yes"; then

configure.in

@@ -922,6 +922,7 @@ WX_ARG_FEATURE(combobox,    [  --enable-combobox       use wxComboBox class], wx
 WX_ARG_FEATURE(comboctrl,   [  --enable-comboctrl      use wxComboCtrl class], wxUSE_COMBOCTRL)
 WX_ARG_FEATURE(commandlinkbutton, [  --enable-commandlinkbutton      use wxCommmandLinkButton class], wxUSE_COMMANDLINKBUTTON)
 WX_ARG_FEATURE(dataviewctrl,[  --enable-dataviewctrl   use wxDataViewCtrl class], wxUSE_DATAVIEWCTRL)
+WX_ARG_DISABLE(nativedvc,   [  --disable-nativedvc     disable use of native wxDataViewCtrl even if available], wxUSE_NATIVE_DATAVIEWCTRL)
 WX_ARG_FEATURE(datepick,    [  --enable-datepick       use wxDatePickerCtrl class], wxUSE_DATEPICKCTRL)
 WX_ARG_FEATURE(detect_sm,   [  --enable-detect_sm      use code to detect X11 session manager], wxUSE_DETECT_SM)
 WX_ARG_FEATURE(dirpicker,   [  --enable-dirpicker      use wxDirPickerCtrl class], wxUSE_DIRPICKERCTRL)
@@ -6834,6 +6835,10 @@ if test "$wxUSE_DATAVIEWCTRL" = "yes"; then
   AC_DEFINE(wxUSE_DATAVIEWCTRL)
   USES_CONTROLS=1
   SAMPLES_SUBDIRS="$SAMPLES_SUBDIRS dataview"
+
+  if test "$wxUSE_NATIVE_DATAVIEWCTRL" = "yes"; then
+    AC_DEFINE(wxUSE_NATIVE_DATAVIEWCTRL)
+  fi
 fi
 
 if test "$wxUSE_IMAGLIST" = "yes"; then

docs/doxygen/mainpages/const_cpp.h

@@ -185,6 +185,7 @@ Currently the following symbols exist:
     decide whether some function should be overloaded for both
     <code>long</code> and <code>long long</code> types.}
 @itemdef{wxHAS_MULTIPLE_FILEDLG_FILTERS, Defined if wxFileDialog supports multiple ('|'-separated) filters.}
+@itemdef{wxHAS_NATIVE_DATAVIEWCTRL, Defined if native wxDataViewCtrl class is being used (this symbol only exists in wxWidgets 3.1.4 and later).}
 @itemdef{wxHAS_NATIVE_WINDOW, Defined if wxNativeWindow class is available.}
 @itemdef{wxHAS_IMAGES_IN_RESOURCES, Defined if <a href="http://en.wikipedia.org/wiki/Resource_(Windows)">
     Windows resource files</a> or OS/2 resource files are available on the current platform.}

docs/doxygen/mainpages/const_wxusedef.h

@@ -175,6 +175,7 @@ library:
 @itemdef{wxUSE_MINIFRAME, Use wxMiniFrame class.}
 @itemdef{wxUSE_MOUSEWHEEL, Support mouse wheel events.}
 @itemdef{wxUSE_MSGDLG, Use wxMessageDialog class and wxMessageBox function.}
+@itemdef{wxUSE_NATIVE_DATAVIEWCTRL, Use native wxDataViewCtrl class (this option is new since wxWidgets 3.1.4).}
 @itemdef{wxUSE_NATIVE_STATUSBAR, Use native wxStatusBar class.}
 @itemdef{wxUSE_NOTEBOOK, Use wxNotebook and related classes.}
 @itemdef{wxUSE_NUMBERDLG, Use wxNumberEntryDialog class.}

include/wx/android/setup.h

@@ -907,6 +907,14 @@
 #define wxUSE_TREECTRL      1   // wxTreeCtrl
 #define wxUSE_TREELISTCTRL  1   // wxTreeListCtrl
 
+// Use generic version of wxDataViewCtrl even if a native one is available?
+//
+// Default is 0.
+//
+// Recommended setting: 0, but can be set to 1 if your program is affected by
+// the native control limitations.
+#define wxUSE_NATIVE_DATAVIEWCTRL 1
+
 // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
 // below either wxStatusBar95 or a generic wxStatusBar will be used.
 //

include/wx/chkconf.h

@@ -649,6 +649,14 @@
 #   endif
 #endif /* !defined(wxUSE_DATAVIEWCTRL) */
 
+#ifndef wxUSE_NATIVE_DATAVIEWCTRL
+#   ifdef wxABORT_ON_CONFIG_ERROR
+#       error "wxUSE_NATIVE_DATAVIEWCTRL must be defined, please read comment near the top of this file."
+#   else
+#       define wxUSE_NATIVE_DATAVIEWCTRL 1
+#   endif
+#endif /* !defined(wxUSE_NATIVE_DATAVIEWCTRL) */
+
 #ifndef wxUSE_DATEPICKCTRL
 #   ifdef wxABORT_ON_CONFIG_ERROR
 #       error "wxUSE_DATEPICKCTRL must be defined, please read comment near the top of this file."

include/wx/dataview.h

@@ -33,8 +33,13 @@ class WXDLLIMPEXP_FWD_CORE wxImageList;
 class wxItemAttr;
 class WXDLLIMPEXP_FWD_CORE wxHeaderCtrl;
 
-#if !(defined(__WXGTK20__) || defined(__WXOSX__) ) || defined(__WXUNIVERSAL__)
+#if wxUSE_NATIVE_DATAVIEWCTRL && !defined(__WXUNIVERSAL__)
-// #if !(defined(__WXOSX__)) || defined(__WXUNIVERSAL__)
+    #if defined(__WXGTK20__) || defined(__WXOSX__)
+        #define wxHAS_NATIVE_DATAVIEWCTRL
+    #endif
+#endif
+
+#ifndef wxHAS_NATIVE_DATAVIEWCTRL
     #define wxHAS_GENERIC_DATAVIEWCTRL
 #endif
 

include/wx/gtk/setup0.h

@@ -908,6 +908,14 @@
 #define wxUSE_TREECTRL      1   // wxTreeCtrl
 #define wxUSE_TREELISTCTRL  1   // wxTreeListCtrl
 
+// Use generic version of wxDataViewCtrl even if a native one is available?
+//
+// Default is 0.
+//
+// Recommended setting: 0, but can be set to 1 if your program is affected by
+// the native control limitations.
+#define wxUSE_NATIVE_DATAVIEWCTRL 1
+
 // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
 // below either wxStatusBar95 or a generic wxStatusBar will be used.
 //

include/wx/motif/setup0.h

@@ -908,6 +908,14 @@
 #define wxUSE_TREECTRL      1   // wxTreeCtrl
 #define wxUSE_TREELISTCTRL  1   // wxTreeListCtrl
 
+// Use generic version of wxDataViewCtrl even if a native one is available?
+//
+// Default is 0.
+//
+// Recommended setting: 0, but can be set to 1 if your program is affected by
+// the native control limitations.
+#define wxUSE_NATIVE_DATAVIEWCTRL 1
+
 // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
 // below either wxStatusBar95 or a generic wxStatusBar will be used.
 //

include/wx/msw/setup0.h

@@ -908,6 +908,14 @@
 #define wxUSE_TREECTRL      1   // wxTreeCtrl
 #define wxUSE_TREELISTCTRL  1   // wxTreeListCtrl
 
+// Use generic version of wxDataViewCtrl even if a native one is available?
+//
+// Default is 0.
+//
+// Recommended setting: 0, but can be set to 1 if your program is affected by
+// the native control limitations.
+#define wxUSE_NATIVE_DATAVIEWCTRL 1
+
 // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
 // below either wxStatusBar95 or a generic wxStatusBar will be used.
 //

include/wx/osx/setup0.h

@@ -914,6 +914,14 @@
 #define wxUSE_TREECTRL      1   // wxTreeCtrl
 #define wxUSE_TREELISTCTRL  1   // wxTreeListCtrl
 
+// Use generic version of wxDataViewCtrl even if a native one is available?
+//
+// Default is 0.
+//
+// Recommended setting: 0, but can be set to 1 if your program is affected by
+// the native control limitations.
+#define wxUSE_NATIVE_DATAVIEWCTRL 1
+
 // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
 // below either wxStatusBar95 or a generic wxStatusBar will be used.
 //

include/wx/setup_inc.h

@@ -904,6 +904,14 @@
 #define wxUSE_TREECTRL      1   // wxTreeCtrl
 #define wxUSE_TREELISTCTRL  1   // wxTreeListCtrl
 
+// Use generic version of wxDataViewCtrl even if a native one is available?
+//
+// Default is 0.
+//
+// Recommended setting: 0, but can be set to 1 if your program is affected by
+// the native control limitations.
+#define wxUSE_NATIVE_DATAVIEWCTRL 1
+
 // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
 // below either wxStatusBar95 or a generic wxStatusBar will be used.
 //

include/wx/univ/setup0.h

@@ -907,6 +907,14 @@
 #define wxUSE_TREECTRL      1   // wxTreeCtrl
 #define wxUSE_TREELISTCTRL  1   // wxTreeListCtrl
 
+// Use generic version of wxDataViewCtrl even if a native one is available?
+//
+// Default is 0.
+//
+// Recommended setting: 0, but can be set to 1 if your program is affected by
+// the native control limitations.
+#define wxUSE_NATIVE_DATAVIEWCTRL 1
+
 // Use a status bar class? Depending on the value of wxUSE_NATIVE_STATUSBAR
 // below either wxStatusBar95 or a generic wxStatusBar will be used.
 //

setup.h.in

@@ -411,6 +411,8 @@
 #define wxUSE_TREECTRL      0
 #define wxUSE_TREELISTCTRL  0
 
+#define wxUSE_NATIVE_DATAVIEWCTRL 0
+
 #define wxUSE_STATUSBAR    0
 
 #define wxUSE_NATIVE_STATUSBAR        0