diff --git a/include/wx/gtk/menu.h b/include/wx/gtk/menu.h index 38da6ec98f..2c9db7bb52 100644 --- a/include/wx/gtk/menu.h +++ b/include/wx/gtk/menu.h @@ -49,13 +49,17 @@ public: int FindMenuItem( const wxString &menuString, const wxString &itemString ) const; wxMenuItem* FindMenuItemById( int id ) const; + + void Check( int id, bool check ); + bool Checked( int id ) const; + void Enable( int id, bool enable ); + bool Enabled( int id ) const; + inline bool IsEnabled(int Id) const { return Enabled(Id); }; + inline bool IsChecked(int Id) const { return Checked(Id); }; int GetMenuCount() const { return m_menus.Number(); } wxMenu *GetMenu(int n) const { return (wxMenu *)m_menus.Nth(n)->Data(); } - bool IsChecked( int id ) const; - bool IsEnabled( int id ) const; - wxList m_menus; GtkWidget *m_menubar; }; diff --git a/include/wx/gtk1/menu.h b/include/wx/gtk1/menu.h index 38da6ec98f..2c9db7bb52 100644 --- a/include/wx/gtk1/menu.h +++ b/include/wx/gtk1/menu.h @@ -49,13 +49,17 @@ public: int FindMenuItem( const wxString &menuString, const wxString &itemString ) const; wxMenuItem* FindMenuItemById( int id ) const; + + void Check( int id, bool check ); + bool Checked( int id ) const; + void Enable( int id, bool enable ); + bool Enabled( int id ) const; + inline bool IsEnabled(int Id) const { return Enabled(Id); }; + inline bool IsChecked(int Id) const { return Checked(Id); }; int GetMenuCount() const { return m_menus.Number(); } wxMenu *GetMenu(int n) const { return (wxMenu *)m_menus.Nth(n)->Data(); } - bool IsChecked( int id ) const; - bool IsEnabled( int id ) const; - wxList m_menus; GtkWidget *m_menubar; }; diff --git a/install/gtk/INSTALL b/install/gtk/INSTALL index f9376902d4..a5df0b5827 100644 --- a/install/gtk/INSTALL +++ b/install/gtk/INSTALL @@ -209,7 +209,7 @@ distribution is: make distrib NOTE: If you are in the base directory of wxGTK it will create -distribution packages for wxxt as well as for all packages in the +distribution packages for wxGTK as well as for all packages in the user directory. So if you want to create only packages for the files in user, then go to the directory other and type: @@ -221,7 +221,7 @@ enter the specific directory and type there: make distrib All the distribution files will be put in the directory -distrib at the base of the wxxt-tree (where also configure +distrib at the base of the wxGTK-tree (where also configure and template.mak can be found). ** Something about Makefile.in diff --git a/install/gtk/configure b/install/gtk/configure deleted file mode 100755 index 9f094a0f57..0000000000 --- a/install/gtk/configure +++ /dev/null @@ -1,6886 +0,0 @@ -#! /bin/sh - -# Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12 -# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. -# -# This configure script is free software; the Free Software Foundation -# gives unlimited permission to copy, distribute and modify it. - -# Defaults: -ac_help= -ac_default_prefix=/usr/local -# Any additions from configure.in: -ac_help="$ac_help - --with-x use the X Window System" -ac_help="$ac_help - --without-threads Force disabling threads " -ac_help="$ac_help -**--with-shared create shared libraries" -ac_help="$ac_help -**--with-optimise create optimised code" -ac_help="$ac_help -**--with-debug_flag create code with WXDEBUG define set to 1" -ac_help="$ac_help -**--with-debug_info create code with debuging information included" -ac_help="$ac_help -**--with-mem_traing create code with memory tracing" -ac_help="$ac_help -**--with-profile create code with profiling information included" -ac_help="$ac_help -**--with-zlib use zlib (LZW comression)" -ac_help="$ac_help -**--with-gdk_imlib use Raster's gdk_imlib (Image library)" -ac_help="$ac_help -**--with-libpng use libpng (PNG image format)" -ac_help="$ac_help -**--with-opengl use opengl (OpenGL or Mesa)" -ac_help="$ac_help -**--with_apple_ieee use the Apple IEEE codec" -ac_help="$ac_help -**--with-storable use storable classes" -ac_help="$ac_help -**--with-autotrans use gettext automatic translation" -ac_help="$ac_help -**--with-afmfonts use Adobe Font Metric Font table" -ac_help="$ac_help -**--with-PS-normalized use normalized PS fonts" -ac_help="$ac_help -**--with-rpc use RPC" -ac_help="$ac_help -**--with-wxresources use wxresources" -ac_help="$ac_help -**--with-prologio use prologio" -ac_help="$ac_help -**--with-postscript use postscript-device-context" -ac_help="$ac_help -**--with-wxconfig use wxconfig" -ac_help="$ac_help -**--with-metafile use metafile" -ac_help="$ac_help -**--with-form use form" -ac_help="$ac_help -**--with-help use help" -ac_help="$ac_help -**--with-ipc use ipc" -ac_help="$ac_help -**--with-enhanceddialog use enhanced dialog" -ac_help="$ac_help -**--with-resources use resources" -ac_help="$ac_help -**--with-clipboard use clipboard" -ac_help="$ac_help -**--with-timedate use timedate" -ac_help="$ac_help -**--with-fraction use fraction" -ac_help="$ac_help -**--with-constraints use constraints" -ac_help="$ac_help -**--with-toolbar use toolbar" -ac_help="$ac_help -**--with-gauge use gauge" -ac_help="$ac_help -**--with-vlbox use virtual list box" -ac_help="$ac_help -**--with-scrollbar use scrollbar" -ac_help="$ac_help -**--with-docview use document view architecture" -ac_help="$ac_help -**--with-printarch use printing architecture" -ac_help="$ac_help -**--with-typetree use typetree" -ac_help="$ac_help -**--with-wxgraph use wxgraph" -ac_help="$ac_help -**--with-wxtree use wxtree" -ac_help="$ac_help - --with-gtk-prefix=PFX Prefix where GTK is installed (optional)" -ac_help="$ac_help - --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)" - -# Initialize some variables set by options. -# The variables have the same names as the options, with -# dashes changed to underlines. -build=NONE -cache_file=./config.cache -exec_prefix=NONE -host=NONE -no_create= -nonopt=NONE -no_recursion= -prefix=NONE -program_prefix=NONE -program_suffix=NONE -program_transform_name=s,x,x, -silent= -site= -srcdir= -target=NONE -verbose= -x_includes=NONE -x_libraries=NONE -bindir='${exec_prefix}/bin' -sbindir='${exec_prefix}/sbin' -libexecdir='${exec_prefix}/libexec' -datadir='${prefix}/share' -sysconfdir='${prefix}/etc' -sharedstatedir='${prefix}/com' -localstatedir='${prefix}/var' -libdir='${exec_prefix}/lib' -includedir='${prefix}/include' -oldincludedir='/usr/include' -infodir='${prefix}/info' -mandir='${prefix}/man' - -# Initialize some other variables. -subdirs= -MFLAGS= MAKEFLAGS= -# Maximum number of lines to put in a shell here document. -ac_max_here_lines=12 - -ac_prev= -for ac_option -do - - # If the previous option needs an argument, assign it. - if test -n "$ac_prev"; then - eval "$ac_prev=\$ac_option" - ac_prev= - continue - fi - - case "$ac_option" in - -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;; - *) ac_optarg= ;; - esac - - # Accept the important Cygnus configure options, so we can diagnose typos. - - case "$ac_option" in - - -bindir | --bindir | --bindi | --bind | --bin | --bi) - ac_prev=bindir ;; - -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) - bindir="$ac_optarg" ;; - - -build | --build | --buil | --bui | --bu) - ac_prev=build ;; - -build=* | --build=* | --buil=* | --bui=* | --bu=*) - build="$ac_optarg" ;; - - -cache-file | --cache-file | --cache-fil | --cache-fi \ - | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) - ac_prev=cache_file ;; - -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ - | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) - cache_file="$ac_optarg" ;; - - -datadir | --datadir | --datadi | --datad | --data | --dat | --da) - ac_prev=datadir ;; - -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ - | --da=*) - datadir="$ac_optarg" ;; - - -disable-* | --disable-*) - ac_feature=`echo $ac_option|sed -e 's/-*disable-//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - eval "enable_${ac_feature}=no" ;; - - -enable-* | --enable-*) - ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; } - fi - ac_feature=`echo $ac_feature| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; - *) ac_optarg=yes ;; - esac - eval "enable_${ac_feature}='$ac_optarg'" ;; - - -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ - | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ - | --exec | --exe | --ex) - ac_prev=exec_prefix ;; - -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ - | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ - | --exec=* | --exe=* | --ex=*) - exec_prefix="$ac_optarg" ;; - - -gas | --gas | --ga | --g) - # Obsolete; use --with-gas. - with_gas=yes ;; - - -help | --help | --hel | --he) - # Omit some internal or obsolete options to make the list less imposing. - # This message is too long to be a string in the A/UX 3.1 sh. - cat << EOF -Usage: configure [options] [host] -Options: [defaults in brackets after descriptions] -Configuration: - --cache-file=FILE cache test results in FILE - --help print this message - --no-create do not create output files - --quiet, --silent do not print \`checking...' messages - --version print the version of autoconf that created configure -Directory and file names: - --prefix=PREFIX install architecture-independent files in PREFIX - [$ac_default_prefix] - --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX - [same as prefix] - --bindir=DIR user executables in DIR [EPREFIX/bin] - --sbindir=DIR system admin executables in DIR [EPREFIX/sbin] - --libexecdir=DIR program executables in DIR [EPREFIX/libexec] - --datadir=DIR read-only architecture-independent data in DIR - [PREFIX/share] - --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc] - --sharedstatedir=DIR modifiable architecture-independent data in DIR - [PREFIX/com] - --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var] - --libdir=DIR object code libraries in DIR [EPREFIX/lib] - --includedir=DIR C header files in DIR [PREFIX/include] - --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include] - --infodir=DIR info documentation in DIR [PREFIX/info] - --mandir=DIR man documentation in DIR [PREFIX/man] - --srcdir=DIR find the sources in DIR [configure dir or ..] - --program-prefix=PREFIX prepend PREFIX to installed program names - --program-suffix=SUFFIX append SUFFIX to installed program names - --program-transform-name=PROGRAM - run sed PROGRAM on installed program names -EOF - cat << EOF -Host type: - --build=BUILD configure for building on BUILD [BUILD=HOST] - --host=HOST configure for HOST [guessed] - --target=TARGET configure for TARGET [TARGET=HOST] -Features and packages: - --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) - --enable-FEATURE[=ARG] include FEATURE [ARG=yes] - --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] - --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) - --x-includes=DIR X include files are in DIR - --x-libraries=DIR X library files are in DIR -EOF - if test -n "$ac_help"; then - echo "--enable and --with options recognized:$ac_help" - fi - exit 0 ;; - - -host | --host | --hos | --ho) - ac_prev=host ;; - -host=* | --host=* | --hos=* | --ho=*) - host="$ac_optarg" ;; - - -includedir | --includedir | --includedi | --included | --include \ - | --includ | --inclu | --incl | --inc) - ac_prev=includedir ;; - -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ - | --includ=* | --inclu=* | --incl=* | --inc=*) - includedir="$ac_optarg" ;; - - -infodir | --infodir | --infodi | --infod | --info | --inf) - ac_prev=infodir ;; - -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) - infodir="$ac_optarg" ;; - - -libdir | --libdir | --libdi | --libd) - ac_prev=libdir ;; - -libdir=* | --libdir=* | --libdi=* | --libd=*) - libdir="$ac_optarg" ;; - - -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ - | --libexe | --libex | --libe) - ac_prev=libexecdir ;; - -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ - | --libexe=* | --libex=* | --libe=*) - libexecdir="$ac_optarg" ;; - - -localstatedir | --localstatedir | --localstatedi | --localstated \ - | --localstate | --localstat | --localsta | --localst \ - | --locals | --local | --loca | --loc | --lo) - ac_prev=localstatedir ;; - -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ - | --localstate=* | --localstat=* | --localsta=* | --localst=* \ - | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) - localstatedir="$ac_optarg" ;; - - -mandir | --mandir | --mandi | --mand | --man | --ma | --m) - ac_prev=mandir ;; - -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) - mandir="$ac_optarg" ;; - - -nfp | --nfp | --nf) - # Obsolete; use --without-fp. - with_fp=no ;; - - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) - no_create=yes ;; - - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) - no_recursion=yes ;; - - -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ - | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ - | --oldin | --oldi | --old | --ol | --o) - ac_prev=oldincludedir ;; - -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ - | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ - | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) - oldincludedir="$ac_optarg" ;; - - -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) - ac_prev=prefix ;; - -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) - prefix="$ac_optarg" ;; - - -program-prefix | --program-prefix | --program-prefi | --program-pref \ - | --program-pre | --program-pr | --program-p) - ac_prev=program_prefix ;; - -program-prefix=* | --program-prefix=* | --program-prefi=* \ - | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) - program_prefix="$ac_optarg" ;; - - -program-suffix | --program-suffix | --program-suffi | --program-suff \ - | --program-suf | --program-su | --program-s) - ac_prev=program_suffix ;; - -program-suffix=* | --program-suffix=* | --program-suffi=* \ - | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) - program_suffix="$ac_optarg" ;; - - -program-transform-name | --program-transform-name \ - | --program-transform-nam | --program-transform-na \ - | --program-transform-n | --program-transform- \ - | --program-transform | --program-transfor \ - | --program-transfo | --program-transf \ - | --program-trans | --program-tran \ - | --progr-tra | --program-tr | --program-t) - ac_prev=program_transform_name ;; - -program-transform-name=* | --program-transform-name=* \ - | --program-transform-nam=* | --program-transform-na=* \ - | --program-transform-n=* | --program-transform-=* \ - | --program-transform=* | --program-transfor=* \ - | --program-transfo=* | --program-transf=* \ - | --program-trans=* | --program-tran=* \ - | --progr-tra=* | --program-tr=* | --program-t=*) - program_transform_name="$ac_optarg" ;; - - -q | -quiet | --quiet | --quie | --qui | --qu | --q \ - | -silent | --silent | --silen | --sile | --sil) - silent=yes ;; - - -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) - ac_prev=sbindir ;; - -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ - | --sbi=* | --sb=*) - sbindir="$ac_optarg" ;; - - -sharedstatedir | --sharedstatedir | --sharedstatedi \ - | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ - | --sharedst | --shareds | --shared | --share | --shar \ - | --sha | --sh) - ac_prev=sharedstatedir ;; - -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ - | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ - | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ - | --sha=* | --sh=*) - sharedstatedir="$ac_optarg" ;; - - -site | --site | --sit) - ac_prev=site ;; - -site=* | --site=* | --sit=*) - site="$ac_optarg" ;; - - -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) - ac_prev=srcdir ;; - -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) - srcdir="$ac_optarg" ;; - - -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ - | --syscon | --sysco | --sysc | --sys | --sy) - ac_prev=sysconfdir ;; - -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ - | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) - sysconfdir="$ac_optarg" ;; - - -target | --target | --targe | --targ | --tar | --ta | --t) - ac_prev=target ;; - -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) - target="$ac_optarg" ;; - - -v | -verbose | --verbose | --verbos | --verbo | --verb) - verbose=yes ;; - - -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12" - exit 0 ;; - - -with-* | --with-*) - ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - case "$ac_option" in - *=*) ;; - *) ac_optarg=yes ;; - esac - eval "with_${ac_package}='$ac_optarg'" ;; - - -without-* | --without-*) - ac_package=`echo $ac_option|sed -e 's/-*without-//'` - # Reject names that are not valid shell variable names. - if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then - { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; } - fi - ac_package=`echo $ac_package| sed 's/-/_/g'` - eval "with_${ac_package}=no" ;; - - --x) - # Obsolete; use --with-x. - with_x=yes ;; - - -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ - | --x-incl | --x-inc | --x-in | --x-i) - ac_prev=x_includes ;; - -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ - | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) - x_includes="$ac_optarg" ;; - - -x-libraries | --x-libraries | --x-librarie | --x-librari \ - | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) - ac_prev=x_libraries ;; - -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ - | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) - x_libraries="$ac_optarg" ;; - - -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; } - ;; - - *) - if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then - echo "configure: warning: $ac_option: invalid host type" 1>&2 - fi - if test "x$nonopt" != xNONE; then - { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } - fi - nonopt="$ac_option" - ;; - - esac -done - -if test -n "$ac_prev"; then - { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; } -fi - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -# File descriptor usage: -# 0 standard input -# 1 file creation -# 2 errors and warnings -# 3 some systems may open it to /dev/tty -# 4 used on the Kubota Titan -# 6 checking for... messages and results -# 5 compiler messages saved in config.log -if test "$silent" = yes; then - exec 6>/dev/null -else - exec 6>&1 -fi -exec 5>./config.log - -echo "\ -This file contains any messages produced by compilers while -running configure, to aid debugging if configure makes a mistake. -" 1>&5 - -# Strip out --no-create and --no-recursion so they do not pile up. -# Also quote any args containing shell metacharacters. -ac_configure_args= -for ac_arg -do - case "$ac_arg" in - -no-create | --no-create | --no-creat | --no-crea | --no-cre \ - | --no-cr | --no-c) ;; - -no-recursion | --no-recursion | --no-recursio | --no-recursi \ - | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;; - *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*) - ac_configure_args="$ac_configure_args '$ac_arg'" ;; - *) ac_configure_args="$ac_configure_args $ac_arg" ;; - esac -done - -# NLS nuisances. -# Only set these to C if already set. These must not be set unconditionally -# because not all systems understand e.g. LANG=C (notably SCO). -# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'! -# Non-C LC_CTYPE values break the ctype check. -if test "${LANG+set}" = set; then LANG=C; export LANG; fi -if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi -if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi -if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi - -# confdefs.h avoids OS command line length limits that DEFS can exceed. -rm -rf conftest* confdefs.h -# AIX cpp loses on an empty file, so make sure it contains at least a newline. -echo > confdefs.h - -# A filename unique to this package, relative to the directory that -# configure is in, which we can look for to find out if srcdir is correct. -ac_unique_file=configure.in - -# Find the source files, if location was not specified. -if test -z "$srcdir"; then - ac_srcdir_defaulted=yes - # Try the directory containing this script, then its parent. - ac_prog=$0 - ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'` - test "x$ac_confdir" = "x$ac_prog" && ac_confdir=. - srcdir=$ac_confdir - if test ! -r $srcdir/$ac_unique_file; then - srcdir=.. - fi -else - ac_srcdir_defaulted=no -fi -if test ! -r $srcdir/$ac_unique_file; then - if test "$ac_srcdir_defaulted" = yes; then - { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; } - else - { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; } - fi -fi -srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'` - -# Prefer explicitly selected file to automatically selected ones. -if test -z "$CONFIG_SITE"; then - if test "x$prefix" != xNONE; then - CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" - else - CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" - fi -fi -for ac_site_file in $CONFIG_SITE; do - if test -r "$ac_site_file"; then - echo "loading site script $ac_site_file" - . "$ac_site_file" - fi -done - -if test -r "$cache_file"; then - echo "loading cache $cache_file" - . $cache_file -else - echo "creating cache $cache_file" - > $cache_file -fi - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then - # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. - if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then - ac_n= ac_c=' -' ac_t=' ' - else - ac_n=-n ac_c= ac_t= - fi -else - ac_n= ac_c='\c' ac_t= -fi - - - - -OS="${OSTYPE}" - -if test "x$OS" = "x"; then - UNAME=`uname` - { echo "configure: error: "The system variable OS has not been set" - "please set is everytime befor compiling on this system" - "A good example for this system would be:" - "setenv OSTYPE $UNAME for csh as a SHELL" - "EXPORT OSTYPE=$UNAME for sh as SHELL" - "please set this and restart again." - " 1>&2; exit 1; } -fi - - -cd ../.. -WXBASEDIR=`pwd` -cd install/gtk - - - -SEARCH_INCLUDE="\ - /usr/Motif1.2/include \ - \ - /usr/X11R6/include \ - /usr/X11R5/include \ - /usr/X11R4/include \ - \ - /usr/include/X11R6 \ - /usr/include/X11R5 \ - /usr/include/X11R4 \ - \ - /usr/local/X11R6/include \ - /usr/local/X11R5/include \ - /usr/local/X11R4/include \ - \ - /usr/local/include/X11R6 \ - /usr/local/include/X11R5 \ - /usr/local/include/X11R4 \ - \ - /usr/X11/include \ - /usr/include/X11 \ - /usr/local/X11/include \ - /usr/local/include/X11 \ - \ - /usr/X386/include \ - /usr/x386/include \ - /usr/XFree86/include/X11 \ - \ - /usr/include \ - /usr/local/include \ - /usr/local/include/gtk \ - /usr/unsupported/include \ - /usr/athena/include \ - /usr/local/x11r5/include \ - /usr/lpp/Xamples/include \ - \ - /usr/openwin/include \ - /usr/openwin/share/include \ - " - -SEARCH_LIB="`echo "$SEARCH_INCLUDE" | sed s/include/lib/g` \ - " - - - -# Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:678: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:707: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - ac_prog_rejected=no - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" - break - fi - done - IFS="$ac_save_ifs" -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - set dummy "$ac_dir/$ac_word" "$@" - shift - ac_cv_prog_CC="$@" - fi -fi -fi -fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } -fi - -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:755: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no -fi -rm -fr conftest* - -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:789: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross - -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:794: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes -else - ac_cv_prog_gcc=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 - -if test $ac_cv_prog_gcc = yes; then - GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:818: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes -else - ac_cv_prog_cc_g=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-O2" - fi -else - GCC= - test "${CFLAGS+set}" = set || CFLAGS="-g" -fi - - -CFLAGS=`echo "$CFLAGS" | sed 's/-g//g'` - -if test "x$CC" != xcc; then - echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6 -echo "configure:850: checking whether $CC and cc understand -c and -o together" >&5 -else - echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6 -echo "configure:853: checking whether cc understands -c and -o together" >&5 -fi -set dummy $CC; ac_cc="`echo $2 | - sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`" -if eval "test \"`echo '$''{'ac_cv_prog_cc_${ac_cc}_c_o'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'foo(){}' > conftest.c -# Make sure it works both with $CC and with simple cc. -# We do the test twice because some compilers refuse to overwrite an -# existing .o file with -o, though they will create one. -ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5' -if { (eval echo configure:865: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } && - test -f conftest.o && { (eval echo configure:866: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; -then - eval ac_cv_prog_cc_${ac_cc}_c_o=yes - if test "x$CC" != xcc; then - # Test first that cc exists at all. - if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:871: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then - ac_try='cc -c conftest.c -o conftest.o 1>&5' - if { (eval echo configure:873: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } && - test -f conftest.o && { (eval echo configure:874: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; - then - # cc works too. - : - else - # cc exists but doesn't like -o. - eval ac_cv_prog_cc_${ac_cc}_c_o=no - fi - fi - fi -else - eval ac_cv_prog_cc_${ac_cc}_c_o=no -fi -rm -f conftest* - -fi -if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = yes"; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 - cat >> confdefs.h <<\EOF -#define NO_MINUS_C_MINUS_O 1 -EOF - -fi - -echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:901: checking how to run the C preprocessor" >&5 -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then -if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - # This must be in double quotes, not single quotes, because CPP may get - # substituted into the Makefile and "${CC-cc}" will confuse make. - CPP="${CC-cc} -E" - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. - cat > conftest.$ac_ext < -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:922: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP="${CC-cc} -E -traditional-cpp" - cat > conftest.$ac_ext < -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:939: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP=/lib/cpp -fi -rm -f conftest* -fi -rm -f conftest* - ac_cv_prog_CPP="$CPP" -fi - CPP="$ac_cv_prog_CPP" -else - ac_cv_prog_CPP="$CPP" -fi -echo "$ac_t""$CPP" 1>&6 - -if test $ac_cv_prog_gcc = yes; then - echo $ac_n "checking whether ${CC-cc} needs -traditional""... $ac_c" 1>&6 -echo "configure:963: checking whether ${CC-cc} needs -traditional" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc_traditional'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_pattern="Autoconf.*'x'" - cat > conftest.$ac_ext < -Autoconf TIOCGETP -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "$ac_pattern" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_prog_gcc_traditional=yes -else - rm -rf conftest* - ac_cv_prog_gcc_traditional=no -fi -rm -f conftest* - - - if test $ac_cv_prog_gcc_traditional = no; then - cat > conftest.$ac_ext < -Autoconf TCGETA -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "$ac_pattern" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_prog_gcc_traditional=yes -fi -rm -f conftest* - - fi -fi - -echo "$ac_t""$ac_cv_prog_gcc_traditional" 1>&6 - if test $ac_cv_prog_gcc_traditional = yes; then - CC="$CC -traditional" - fi -fi - - - - -for ac_prog in $CCC c++ g++ gcc CC cxx cc++ -do -# Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1016: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CXX"; then - ac_cv_prog_CXX="$CXX" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CXX="$ac_prog" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CXX="$ac_cv_prog_CXX" -if test -n "$CXX"; then - echo "$ac_t""$CXX" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -test -n "$CXX" && break -done -test -n "$CXX" || CXX="gcc" - - -echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1047: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) works" >&5 - -ac_ext=C -# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CXX-g++} -o conftest $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cxx_cross - -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - ac_cv_prog_cxx_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cxx_cross=no - else - ac_cv_prog_cxx_cross=yes - fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cxx_works=no -fi -rm -fr conftest* -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross - -echo "$ac_t""$ac_cv_prog_cxx_works" 1>&6 -if test $ac_cv_prog_cxx_works = no; then - { echo "configure: error: installation or configuration problem: C++ compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1087: checking whether the C++ compiler ($CXX $CXXFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cxx_cross" 1>&6 -cross_compiling=$ac_cv_prog_cxx_cross - -echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6 -echo "configure:1092: checking whether we are using GNU C++" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.C <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gxx=yes -else - ac_cv_prog_gxx=no -fi -fi - -echo "$ac_t""$ac_cv_prog_gxx" 1>&6 - -if test $ac_cv_prog_gxx = yes; then - GXX=yes - ac_test_CXXFLAGS="${CXXFLAGS+set}" - ac_save_CXXFLAGS="$CXXFLAGS" - CXXFLAGS= - echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6 -echo "configure:1116: checking whether ${CXX-g++} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - echo 'void f(){}' > conftest.cc -if test -z "`${CXX-g++} -g -c conftest.cc 2>&1`"; then - ac_cv_prog_cxx_g=yes -else - ac_cv_prog_cxx_g=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_prog_cxx_g" 1>&6 - if test "$ac_test_CXXFLAGS" = set; then - CXXFLAGS="$ac_save_CXXFLAGS" - elif test $ac_cv_prog_cxx_g = yes; then - CXXFLAGS="-g -O2" - else - CXXFLAGS="-O2" - fi -else - GXX= - test "${CXXFLAGS+set}" = set || CXXFLAGS="-g" -fi - -echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6 -echo "configure:1144: checking how to run the C++ preprocessor" >&5 -if test -z "$CXXCPP"; then -if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_ext=C -# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CXXCPP $CPPFLAGS' -ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CXX-g++} -o conftest $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cxx_cross - CXXCPP="${CXX-g++} -E" - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1162: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CXXCPP=/lib/cpp -fi -rm -f conftest* - ac_cv_prog_CXXCPP="$CXXCPP" -ac_ext=c -# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. -ac_cpp='$CPP $CPPFLAGS' -ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' -cross_compiling=$ac_cv_prog_cc_cross -fi -fi -CXXCPP="$ac_cv_prog_CXXCPP" -echo "$ac_t""$CXXCPP" 1>&6 - - -CXXFLAGS=`echo "$CXXFLAGS" | sed 's/-g//g'` - - - -# Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1194: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_RANLIB="ranlib" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" -fi -fi -RANLIB="$ac_cv_prog_RANLIB" -if test -n "$RANLIB"; then - echo "$ac_t""$RANLIB" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - -# Extract the first word of "ar", so it can be a program name with args. -set dummy ar; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1224: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$AR"; then - ac_cv_prog_AR="$AR" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_AR="ar" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar" -fi -fi -AR="$ac_cv_prog_AR" -if test -n "$AR"; then - echo "$ac_t""$AR" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - -ac_aux_dir= -for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do - if test -f $ac_dir/install-sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install-sh -c" - break - elif test -f $ac_dir/install.sh; then - ac_aux_dir=$ac_dir - ac_install_sh="$ac_aux_dir/install.sh -c" - break - fi -done -if test -z "$ac_aux_dir"; then - { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; } -fi -ac_config_guess=$ac_aux_dir/config.guess -ac_config_sub=$ac_aux_dir/config.sub -ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. - -# Find a good install program. We prefer a C program (faster), -# so one script is as good as another. But avoid the broken or -# incompatible versions: -# SysV /etc/install, /usr/sbin/install -# SunOS /usr/etc/install -# IRIX /sbin/install -# AIX /bin/install -# AFS /usr/afsws/bin/install, which mishandles nonexistent args -# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" -# ./install, which can be erroneously created by make from ./install.sh. -echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1281: checking for a BSD compatible install" >&5 -if test -z "$INSTALL"; then -if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - # Account for people who put trailing slashes in PATH elements. - case "$ac_dir/" in - /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; - *) - # OSF1 and SCO ODT 3.0 have their own names for install. - for ac_prog in ginstall installbsd scoinst install; do - if test -f $ac_dir/$ac_prog; then - if test $ac_prog = install && - grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then - # AIX install. It has an incompatible calling convention. - # OSF/1 installbsd also uses dspmsg, but is usable. - : - else - ac_cv_path_install="$ac_dir/$ac_prog -c" - break 2 - fi - fi - done - ;; - esac - done - IFS="$ac_save_IFS" - -fi - if test "${ac_cv_path_install+set}" = set; then - INSTALL="$ac_cv_path_install" - else - # As a last resort, use the slow shell script. We don't cache a - # path for INSTALL within a source directory, because that will - # break other packages using the cache if that directory is - # removed, or if the path is relative. - INSTALL="$ac_install_sh" - fi -fi -echo "$ac_t""$INSTALL" 1>&6 - -# Use test -z because SunOS4 sh mishandles braces in ${var-val}. -# It thinks the first close brace ends the variable substitution. -test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' - -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - - -echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:1332: checking whether ln -s works" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - rm -f conftestdata -if ln -s X conftestdata 2>/dev/null -then - rm -f conftestdata - ac_cv_prog_LN_S="ln -s" -else - ac_cv_prog_LN_S=ln -fi -fi -LN_S="$ac_cv_prog_LN_S" -if test "$ac_cv_prog_LN_S" = "ln -s"; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - -for ac_prog in mawk gawk nawk awk -do -# Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1358: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$AWK"; then - ac_cv_prog_AWK="$AWK" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_AWK="$ac_prog" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -AWK="$ac_cv_prog_AWK" -if test -n "$AWK"; then - echo "$ac_t""$AWK" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -test -n "$AWK" && break -done - - -echo $ac_n "checking "make for VPATH support"""... $ac_c" 1>&6 -echo "configure:1388: checking "make for VPATH support"" >&5 -cat - << EOF > confMake -check : file - cp \$? \$@ - cp \$? final_file -EOF - -if test ! -d sub ; then - mkdir sub -fi -echo dummy > sub/file -${MAKE-make} -f confMake VPATH=sub 2> config.log > /dev/null -RESULT=$? -rm -f sub/file check final_file config.log confMake -rmdir sub -if test "$RESULT" = 0; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 - { echo "configure: error: You need a make-utility that is able to use the variable -VPATH correctly. -If your version of make does not support VPATH correctly" 1>&2; exit 1; } -fi - - -# If we find X, set shell vars x_includes and x_libraries to the -# paths, otherwise set no_x=yes. -# Uses ac_ vars as temps to allow command line to override cache and checks. -# --without-x overrides everything else, but does not touch the cache. -echo $ac_n "checking for X""... $ac_c" 1>&6 -echo "configure:1418: checking for X" >&5 - -# Check whether --with-x or --without-x was given. -if test "${with_x+set}" = set; then - withval="$with_x" - : -fi - -# $have_x is `yes', `no', `disabled', or empty when we do not yet know. -if test "x$with_x" = xno; then - # The user explicitly disabled X. - have_x=disabled -else - if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then - # Both variables are already set. - have_x=yes - else -if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - # One or both of the vars are not set, and there is no cached value. -ac_x_includes=NO ac_x_libraries=NO -rm -fr conftestdir -if mkdir conftestdir; then - cd conftestdir - # Make sure to not put "make" in the Imakefile rules, since we grep it out. - cat > Imakefile <<'EOF' -acfindx: - @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"' -EOF - if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then - # GNU make sometimes prints "make[1]: Entering...", which would confuse us. - eval `${MAKE-make} acfindx 2>/dev/null | grep -v make` - # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR. - for ac_extension in a so sl; do - if test ! -f $ac_im_usrlibdir/libX11.$ac_extension && - test -f $ac_im_libdir/libX11.$ac_extension; then - ac_im_usrlibdir=$ac_im_libdir; break - fi - done - # Screen out bogus values from the imake configuration. They are - # bogus both because they are the default anyway, and because - # using them would break gcc on systems where it needs fixed includes. - case "$ac_im_incroot" in - /usr/include) ;; - *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;; - esac - case "$ac_im_usrlibdir" in - /usr/lib | /lib) ;; - *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;; - esac - fi - cd .. - rm -fr conftestdir -fi - -if test "$ac_x_includes" = NO; then - # Guess where to find include files, by looking for this one X11 .h file. - test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h - - # First, try using that file with no special directory specified. -cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1485: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - # We can compile using X headers with no special include directory. -ac_x_includes= -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - # Look for the header file in a standard set of common directories. -# Check X11 before X11Rn because it is often a symlink to the current release. - for ac_dir in \ - /usr/X11/include \ - /usr/X11R6/include \ - /usr/X11R5/include \ - /usr/X11R4/include \ - \ - /usr/include/X11 \ - /usr/include/X11R6 \ - /usr/include/X11R5 \ - /usr/include/X11R4 \ - \ - /usr/local/X11/include \ - /usr/local/X11R6/include \ - /usr/local/X11R5/include \ - /usr/local/X11R4/include \ - \ - /usr/local/include/X11 \ - /usr/local/include/X11R6 \ - /usr/local/include/X11R5 \ - /usr/local/include/X11R4 \ - \ - /usr/X386/include \ - /usr/x386/include \ - /usr/XFree86/include/X11 \ - \ - /usr/include \ - /usr/local/include \ - /usr/unsupported/include \ - /usr/athena/include \ - /usr/local/x11r5/include \ - /usr/lpp/Xamples/include \ - \ - /usr/openwin/include \ - /usr/openwin/share/include \ - ; \ - do - if test -r "$ac_dir/$x_direct_test_include"; then - ac_x_includes=$ac_dir - break - fi - done -fi -rm -f conftest* -fi # $ac_x_includes = NO - -if test "$ac_x_libraries" = NO; then - # Check for the libraries. - - test -z "$x_direct_test_library" && x_direct_test_library=Xt - test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc - - # See if we find them without any special options. - # Don't add to $LIBS permanently. - ac_save_LIBS="$LIBS" - LIBS="-l$x_direct_test_library $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - LIBS="$ac_save_LIBS" -# We can link X programs with no special library path. -ac_x_libraries= -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - LIBS="$ac_save_LIBS" -# First see if replacing the include by lib works. -# Check X11 before X11Rn because it is often a symlink to the current release. -for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \ - /usr/X11/lib \ - /usr/X11R6/lib \ - /usr/X11R5/lib \ - /usr/X11R4/lib \ - \ - /usr/lib/X11 \ - /usr/lib/X11R6 \ - /usr/lib/X11R5 \ - /usr/lib/X11R4 \ - \ - /usr/local/X11/lib \ - /usr/local/X11R6/lib \ - /usr/local/X11R5/lib \ - /usr/local/X11R4/lib \ - \ - /usr/local/lib/X11 \ - /usr/local/lib/X11R6 \ - /usr/local/lib/X11R5 \ - /usr/local/lib/X11R4 \ - \ - /usr/X386/lib \ - /usr/x386/lib \ - /usr/XFree86/lib/X11 \ - \ - /usr/lib \ - /usr/local/lib \ - /usr/unsupported/lib \ - /usr/athena/lib \ - /usr/local/x11r5/lib \ - /usr/lpp/Xamples/lib \ - /lib/usr/lib/X11 \ - \ - /usr/openwin/lib \ - /usr/openwin/share/lib \ - ; \ -do - for ac_extension in a so sl; do - if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then - ac_x_libraries=$ac_dir - break 2 - fi - done -done -fi -rm -f conftest* -fi # $ac_x_libraries = NO - -if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then - # Didn't find X anywhere. Cache the known absence of X. - ac_cv_have_x="have_x=no" -else - # Record where we found X for the cache. - ac_cv_have_x="have_x=yes \ - ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries" -fi -fi - fi - eval "$ac_cv_have_x" -fi # $with_x != no - -if test "$have_x" != yes; then - echo "$ac_t""$have_x" 1>&6 - no_x=yes -else - # If each of the values was on the command line, it overrides each guess. - test "x$x_includes" = xNONE && x_includes=$ac_x_includes - test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries - # Update the cache value to reflect the command line values. - ac_cv_have_x="have_x=yes \ - ac_x_includes=$x_includes ac_x_libraries=$x_libraries" - echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6 -fi - -if test "$no_x" = yes; then - # Not all programs may use this symbol, but it does not hurt to define it. - cat >> confdefs.h <<\EOF -#define X_DISPLAY_MISSING 1 -EOF - - X_CFLAGS= X_PRE_LIBS= X_LIBS= X_EXTRA_LIBS= -else - if test -n "$x_includes"; then - X_CFLAGS="$X_CFLAGS -I$x_includes" - fi - - # It would also be nice to do this for all -L options, not just this one. - if test -n "$x_libraries"; then - X_LIBS="$X_LIBS -L$x_libraries" - # For Solaris; some versions of Sun CC require a space after -R and - # others require no space. Words are not sufficient . . . . - case "`(uname -sr) 2>/dev/null`" in - "SunOS 5"*) - echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6 -echo "configure:1667: checking whether -R must be followed by a space" >&5 - ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries" - cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - ac_R_nospace=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_R_nospace=no -fi -rm -f conftest* - if test $ac_R_nospace = yes; then - echo "$ac_t""no" 1>&6 - X_LIBS="$X_LIBS -R$x_libraries" - else - LIBS="$ac_xsave_LIBS -R $x_libraries" - cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - ac_R_space=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_R_space=no -fi -rm -f conftest* - if test $ac_R_space = yes; then - echo "$ac_t""yes" 1>&6 - X_LIBS="$X_LIBS -R $x_libraries" - else - echo "$ac_t""neither works" 1>&6 - fi - fi - LIBS="$ac_xsave_LIBS" - esac - fi - - # Check for system-dependent libraries X programs must link with. - # Do this before checking for the system-independent R6 libraries - # (-lICE), since we may need -lsocket or whatever for X linking. - - if test "$ISC" = yes; then - X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl_s -linet" - else - # Martyn.Johnson@cl.cam.ac.uk says this is needed for Ultrix, if the X - # libraries were built with DECnet support. And karl@cs.umb.edu says - # the Alpha needs dnet_stub (dnet does not exist). - echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6 -echo "configure:1732: checking for dnet_ntoa in -ldnet" >&5 -ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-ldnet $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet" -else - echo "$ac_t""no" 1>&6 -fi - - if test $ac_cv_lib_dnet_dnet_ntoa = no; then - echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6 -echo "configure:1773: checking for dnet_ntoa in -ldnet_stub" >&5 -ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-ldnet_stub $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub" -else - echo "$ac_t""no" 1>&6 -fi - - fi - - # msh@cis.ufl.edu says -lnsl (and -lsocket) are needed for his 386/AT, - # to get the SysV transport functions. - # chad@anasazi.com says the Pyramis MIS-ES running DC/OSx (SVR4) - # needs -lnsl. - # The nsl library prevents programs from opening the X display - # on Irix 5.2, according to dickey@clark.net. - echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6 -echo "configure:1821: checking for gethostbyname" >&5 -if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char gethostbyname(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname) -choke me -#else -gethostbyname(); -#endif - -; return 0; } -EOF -if { (eval echo configure:1849: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_func_gethostbyname=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_gethostbyname=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then - echo "$ac_t""yes" 1>&6 - : -else - echo "$ac_t""no" 1>&6 -fi - - if test $ac_cv_func_gethostbyname = no; then - echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6 -echo "configure:1870: checking for gethostbyname in -lnsl" >&5 -ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lnsl $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl" -else - echo "$ac_t""no" 1>&6 -fi - - fi - - # lieder@skyler.mavd.honeywell.com says without -lsocket, - # socket/setsockopt and other routines are undefined under SCO ODT - # 2.0. But -lsocket is broken on IRIX 5.2 (and is not necessary - # on later versions), says simon@lia.di.epfl.ch: it contains - # gethostby* variants that don't use the nameserver (or something). - # -lsocket must be given before -lnsl if both are needed. - # We assume that if connect needs -lnsl, so does gethostbyname. - echo $ac_n "checking for connect""... $ac_c" 1>&6 -echo "configure:1919: checking for connect" >&5 -if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char connect(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_connect) || defined (__stub___connect) -choke me -#else -connect(); -#endif - -; return 0; } -EOF -if { (eval echo configure:1947: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_func_connect=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_connect=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then - echo "$ac_t""yes" 1>&6 - : -else - echo "$ac_t""no" 1>&6 -fi - - if test $ac_cv_func_connect = no; then - echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6 -echo "configure:1968: checking for connect in -lsocket" >&5 -ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lsocket $X_EXTRA_LIBS $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS" -else - echo "$ac_t""no" 1>&6 -fi - - fi - - # gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX. - echo $ac_n "checking for remove""... $ac_c" 1>&6 -echo "configure:2011: checking for remove" >&5 -if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char remove(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_remove) || defined (__stub___remove) -choke me -#else -remove(); -#endif - -; return 0; } -EOF -if { (eval echo configure:2039: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_func_remove=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_remove=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'remove`\" = yes"; then - echo "$ac_t""yes" 1>&6 - : -else - echo "$ac_t""no" 1>&6 -fi - - if test $ac_cv_func_remove = no; then - echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6 -echo "configure:2060: checking for remove in -lposix" >&5 -ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lposix $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix" -else - echo "$ac_t""no" 1>&6 -fi - - fi - - # BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay. - echo $ac_n "checking for shmat""... $ac_c" 1>&6 -echo "configure:2103: checking for shmat" >&5 -if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char shmat(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_shmat) || defined (__stub___shmat) -choke me -#else -shmat(); -#endif - -; return 0; } -EOF -if { (eval echo configure:2131: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_func_shmat=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_shmat=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'shmat`\" = yes"; then - echo "$ac_t""yes" 1>&6 - : -else - echo "$ac_t""no" 1>&6 -fi - - if test $ac_cv_func_shmat = no; then - echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6 -echo "configure:2152: checking for shmat in -lipc" >&5 -ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lipc $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc" -else - echo "$ac_t""no" 1>&6 -fi - - fi - fi - - # Check for libraries that X11R6 Xt/Xaw programs need. - ac_save_LDFLAGS="$LDFLAGS" - test -n "$x_libraries" && LDFLAGS="$LDFLAGS -L$x_libraries" - # SM needs ICE to (dynamically) link under SunOS 4.x (so we have to - # check for ICE first), but we must link in the order -lSM -lICE or - # we get undefined symbols. So assume we have SM if we have ICE. - # These have to be linked with before -lX11, unlike the other - # libraries we check for below, so use a different variable. - # --interran@uluru.Stanford.EDU, kb@cs.umb.edu. - echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6 -echo "configure:2204: checking for IceConnectionNumber in -lICE" >&5 -ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lICE $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - X_PRE_LIBS="$X_PRE_LIBS -lSM -lICE" -else - echo "$ac_t""no" 1>&6 -fi - - LDFLAGS="$ac_save_LDFLAGS" - -fi - - -ac_header_dirent=no -for ac_hdr in dirent.h sys/ndir.h sys/dir.h ndir.h -do -ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for $ac_hdr that defines DIR""... $ac_c" 1>&6 -echo "configure:2253: checking for $ac_hdr that defines DIR" >&5 -if eval "test \"`echo '$''{'ac_cv_header_dirent_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include <$ac_hdr> -int main() { -DIR *dirp = 0; -; return 0; } -EOF -if { (eval echo configure:2266: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - eval "ac_cv_header_dirent_$ac_safe=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_dirent_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_dirent_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` - cat >> confdefs.h <&6 -fi -done -# Two versions of opendir et al. are in -ldir and -lx on SCO Xenix. -if test $ac_header_dirent = dirent.h; then -echo $ac_n "checking for opendir in -ldir""... $ac_c" 1>&6 -echo "configure:2291: checking for opendir in -ldir" >&5 -ac_lib_var=`echo dir'_'opendir | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-ldir $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - LIBS="$LIBS -ldir" -else - echo "$ac_t""no" 1>&6 -fi - -else -echo $ac_n "checking for opendir in -lx""... $ac_c" 1>&6 -echo "configure:2332: checking for opendir in -lx" >&5 -ac_lib_var=`echo x'_'opendir | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lx $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - LIBS="$LIBS -lx" -else - echo "$ac_t""no" 1>&6 -fi - -fi - -echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:2374: checking for ANSI C header files" >&5 -if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include -#include -#include -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2387: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - ac_cv_header_stdc=yes -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_header_stdc=no -fi -rm -f conftest* - -if test $ac_cv_header_stdc = yes; then - # SunOS 4.x string.h does not declare mem*, contrary to ANSI. -cat > conftest.$ac_ext < -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "memchr" >/dev/null 2>&1; then - : -else - rm -rf conftest* - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. -cat > conftest.$ac_ext < -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "free" >/dev/null 2>&1; then - : -else - rm -rf conftest* - ac_cv_header_stdc=no -fi -rm -f conftest* - -fi - -if test $ac_cv_header_stdc = yes; then - # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. -if test "$cross_compiling" = yes; then - : -else - cat > conftest.$ac_ext < -#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') -#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) -#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) -int main () { int i; for (i = 0; i < 256; i++) -if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); -exit (0); } - -EOF -if { (eval echo configure:2454: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - : -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_header_stdc=no -fi -rm -fr conftest* -fi - -fi -fi - -echo "$ac_t""$ac_cv_header_stdc" 1>&6 -if test $ac_cv_header_stdc = yes; then - cat >> confdefs.h <<\EOF -#define STDC_HEADERS 1 -EOF - -fi - -echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6 -echo "configure:2478: checking for sys/wait.h that is POSIX.1 compatible" >&5 -if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include -#ifndef WEXITSTATUS -#define WEXITSTATUS(stat_val) ((unsigned)(stat_val) >> 8) -#endif -#ifndef WIFEXITED -#define WIFEXITED(stat_val) (((stat_val) & 255) == 0) -#endif -int main() { -int s; -wait (&s); -s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; -; return 0; } -EOF -if { (eval echo configure:2499: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_header_sys_wait_h=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_header_sys_wait_h=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_header_sys_wait_h" 1>&6 -if test $ac_cv_header_sys_wait_h = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_SYS_WAIT_H 1 -EOF - -fi - -ac_safe=`echo "fcntl.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for fcntl.h""... $ac_c" 1>&6 -echo "configure:2521: checking for fcntl.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2531: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - : -else - echo "$ac_t""no" 1>&6 -fi - -ac_safe=`echo "limits.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for limits.h""... $ac_c" 1>&6 -echo "configure:2554: checking for limits.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2564: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - : -else - echo "$ac_t""no" 1>&6 -fi - -ac_safe=`echo "sys/file.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for sys/file.h""... $ac_c" 1>&6 -echo "configure:2587: checking for sys/file.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2597: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - : -else - echo "$ac_t""no" 1>&6 -fi - -ac_safe=`echo "sys/time.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for sys/time.h""... $ac_c" 1>&6 -echo "configure:2620: checking for sys/time.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2630: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - : -else - echo "$ac_t""no" 1>&6 -fi - -ac_safe=`echo "unistd.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for unistd.h""... $ac_c" 1>&6 -echo "configure:2653: checking for unistd.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2663: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - : -else - echo "$ac_t""no" 1>&6 -fi - -ac_safe=`echo "linux/joystick.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for linux/joystick.h""... $ac_c" 1>&6 -echo "configure:2686: checking for linux/joystick.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2696: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - : -else - echo "$ac_t""no" 1>&6 -fi - -GTK_JOYSTICK="" -if test "$ac_cv_header_linux_joystick_h" = "yes"; then - GTK_JOYSTICK="gtk/joystick.cpp" -fi - - -echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6 -echo "configure:2724: checking for uid_t in sys/types.h" >&5 -if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "uid_t" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_type_uid_t=yes -else - rm -rf conftest* - ac_cv_type_uid_t=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_type_uid_t" 1>&6 -if test $ac_cv_type_uid_t = no; then - cat >> confdefs.h <<\EOF -#define uid_t int -EOF - - cat >> confdefs.h <<\EOF -#define gid_t int -EOF - -fi - -echo $ac_n "checking type of array argument to getgroups""... $ac_c" 1>&6 -echo "configure:2758: checking type of array argument to getgroups" >&5 -if eval "test \"`echo '$''{'ac_cv_type_getgroups'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$cross_compiling" = yes; then - ac_cv_type_getgroups=cross -else - cat > conftest.$ac_ext < -#define NGID 256 -#undef MAX -#define MAX(x, y) ((x) > (y) ? (x) : (y)) -main() -{ - gid_t gidset[NGID]; - int i, n; - union { gid_t gval; long lval; } val; - - val.lval = -1; - for (i = 0; i < NGID; i++) - gidset[i] = val.gval; - n = getgroups (sizeof (gidset) / MAX (sizeof (int), sizeof (gid_t)) - 1, - gidset); - /* Exit non-zero if getgroups seems to require an array of ints. This - happens when gid_t is short but getgroups modifies an array of ints. */ - exit ((n > 0 && gidset[n] != val.gval) ? 1 : 0); -} - -EOF -if { (eval echo configure:2791: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - ac_cv_type_getgroups=gid_t -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_type_getgroups=int -fi -rm -fr conftest* -fi - -if test $ac_cv_type_getgroups = cross; then - cat > conftest.$ac_ext < -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "getgroups.*int.*gid_t" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_type_getgroups=gid_t -else - rm -rf conftest* - ac_cv_type_getgroups=int -fi -rm -f conftest* - -fi -fi - -echo "$ac_t""$ac_cv_type_getgroups" 1>&6 -cat >> confdefs.h <&6 -echo "configure:2829: checking for mode_t" >&5 -if eval "test \"`echo '$''{'ac_cv_type_mode_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#if STDC_HEADERS -#include -#include -#endif -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "mode_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_type_mode_t=yes -else - rm -rf conftest* - ac_cv_type_mode_t=no -fi -rm -f conftest* - -fi -echo "$ac_t""$ac_cv_type_mode_t" 1>&6 -if test $ac_cv_type_mode_t = no; then - cat >> confdefs.h <<\EOF -#define mode_t int -EOF - -fi - -echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:2862: checking for off_t" >&5 -if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#if STDC_HEADERS -#include -#include -#endif -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_type_off_t=yes -else - rm -rf conftest* - ac_cv_type_off_t=no -fi -rm -f conftest* - -fi -echo "$ac_t""$ac_cv_type_off_t" 1>&6 -if test $ac_cv_type_off_t = no; then - cat >> confdefs.h <<\EOF -#define off_t long -EOF - -fi - -echo $ac_n "checking for pid_t""... $ac_c" 1>&6 -echo "configure:2895: checking for pid_t" >&5 -if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#if STDC_HEADERS -#include -#include -#endif -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_type_pid_t=yes -else - rm -rf conftest* - ac_cv_type_pid_t=no -fi -rm -f conftest* - -fi -echo "$ac_t""$ac_cv_type_pid_t" 1>&6 -if test $ac_cv_type_pid_t = no; then - cat >> confdefs.h <<\EOF -#define pid_t int -EOF - -fi - -echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:2928: checking return type of signal handlers" >&5 -if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include -#ifdef signal -#undef signal -#endif -#ifdef __cplusplus -extern "C" void (*signal (int, void (*)(int)))(int); -#else -void (*signal ()) (); -#endif - -int main() { -int i; -; return 0; } -EOF -if { (eval echo configure:2950: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_type_signal=void -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_type_signal=int -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_type_signal" 1>&6 -cat >> confdefs.h <&6 -echo "configure:2969: checking for size_t" >&5 -if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#if STDC_HEADERS -#include -#include -#endif -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_type_size_t=yes -else - rm -rf conftest* - ac_cv_type_size_t=no -fi -rm -f conftest* - -fi -echo "$ac_t""$ac_cv_type_size_t" 1>&6 -if test $ac_cv_type_size_t = no; then - cat >> confdefs.h <<\EOF -#define size_t unsigned -EOF - -fi - -echo $ac_n "checking for uid_t in sys/types.h""... $ac_c" 1>&6 -echo "configure:3002: checking for uid_t in sys/types.h" >&5 -if eval "test \"`echo '$''{'ac_cv_type_uid_t'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "uid_t" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_type_uid_t=yes -else - rm -rf conftest* - ac_cv_type_uid_t=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_type_uid_t" 1>&6 -if test $ac_cv_type_uid_t = no; then - cat >> confdefs.h <<\EOF -#define uid_t int -EOF - - cat >> confdefs.h <<\EOF -#define gid_t int -EOF - -fi - - - -echo $ac_n "checking whether stat file-mode macros are broken""... $ac_c" 1>&6 -echo "configure:3038: checking whether stat file-mode macros are broken" >&5 -if eval "test \"`echo '$''{'ac_cv_header_stat_broken'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include - -#if defined(S_ISBLK) && defined(S_IFDIR) -# if S_ISBLK (S_IFDIR) -You lose. -# endif -#endif - -#if defined(S_ISBLK) && defined(S_IFCHR) -# if S_ISBLK (S_IFCHR) -You lose. -# endif -#endif - -#if defined(S_ISLNK) && defined(S_IFREG) -# if S_ISLNK (S_IFREG) -You lose. -# endif -#endif - -#if defined(S_ISSOCK) && defined(S_IFREG) -# if S_ISSOCK (S_IFREG) -You lose. -# endif -#endif - -EOF -if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "You lose" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_header_stat_broken=yes -else - rm -rf conftest* - ac_cv_header_stat_broken=no -fi -rm -f conftest* - -fi - -echo "$ac_t""$ac_cv_header_stat_broken" 1>&6 -if test $ac_cv_header_stat_broken = yes; then - cat >> confdefs.h <<\EOF -#define STAT_MACROS_BROKEN 1 -EOF - -fi - -echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6 -echo "configure:3094: checking whether time.h and sys/time.h may both be included" >&5 -if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include -#include -int main() { -struct tm *tp; -; return 0; } -EOF -if { (eval echo configure:3108: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_header_time=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_header_time=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_header_time" 1>&6 -if test $ac_cv_header_time = yes; then - cat >> confdefs.h <<\EOF -#define TIME_WITH_SYS_TIME 1 -EOF - -fi - -echo $ac_n "checking for st_blksize in struct stat""... $ac_c" 1>&6 -echo "configure:3129: checking for st_blksize in struct stat" >&5 -if eval "test \"`echo '$''{'ac_cv_struct_st_blksize'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include -int main() { -struct stat s; s.st_blksize; -; return 0; } -EOF -if { (eval echo configure:3142: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_struct_st_blksize=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_struct_st_blksize=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_struct_st_blksize" 1>&6 -if test $ac_cv_struct_st_blksize = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_ST_BLKSIZE 1 -EOF - -fi - -echo $ac_n "checking for st_blocks in struct stat""... $ac_c" 1>&6 -echo "configure:3163: checking for st_blocks in struct stat" >&5 -if eval "test \"`echo '$''{'ac_cv_struct_st_blocks'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include -int main() { -struct stat s; s.st_blocks; -; return 0; } -EOF -if { (eval echo configure:3176: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_struct_st_blocks=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_struct_st_blocks=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_struct_st_blocks" 1>&6 -if test $ac_cv_struct_st_blocks = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_ST_BLOCKS 1 -EOF - -else - LIBOBJS="$LIBOBJS fileblocks.o" -fi - -echo $ac_n "checking for st_rdev in struct stat""... $ac_c" 1>&6 -echo "configure:3199: checking for st_rdev in struct stat" >&5 -if eval "test \"`echo '$''{'ac_cv_struct_st_rdev'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include -int main() { -struct stat s; s.st_rdev; -; return 0; } -EOF -if { (eval echo configure:3212: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_struct_st_rdev=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_struct_st_rdev=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_struct_st_rdev" 1>&6 -if test $ac_cv_struct_st_rdev = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_ST_RDEV 1 -EOF - -fi - -echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6 -echo "configure:3233: checking whether struct tm is in sys/time.h or time.h" >&5 -if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include -int main() { -struct tm *tp; tp->tm_sec; -; return 0; } -EOF -if { (eval echo configure:3246: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_struct_tm=time.h -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_struct_tm=sys/time.h -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_struct_tm" 1>&6 -if test $ac_cv_struct_tm = sys/time.h; then - cat >> confdefs.h <<\EOF -#define TM_IN_SYS_TIME 1 -EOF - -fi - -echo $ac_n "checking for tm_zone in struct tm""... $ac_c" 1>&6 -echo "configure:3267: checking for tm_zone in struct tm" >&5 -if eval "test \"`echo '$''{'ac_cv_struct_tm_zone'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#include <$ac_cv_struct_tm> -int main() { -struct tm tm; tm.tm_zone; -; return 0; } -EOF -if { (eval echo configure:3280: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_struct_tm_zone=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_struct_tm_zone=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_struct_tm_zone" 1>&6 -if test "$ac_cv_struct_tm_zone" = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_TM_ZONE 1 -EOF - -else - echo $ac_n "checking for tzname""... $ac_c" 1>&6 -echo "configure:3300: checking for tzname" >&5 -if eval "test \"`echo '$''{'ac_cv_var_tzname'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -#ifndef tzname /* For SGI. */ -extern char *tzname[]; /* RS6000 and others reject char **tzname. */ -#endif -int main() { -atoi(*tzname); -; return 0; } -EOF -if { (eval echo configure:3315: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - ac_cv_var_tzname=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_var_tzname=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_var_tzname" 1>&6 - if test $ac_cv_var_tzname = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_TZNAME 1 -EOF - - fi -fi - - - -echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:3339: checking for working const" >&5 -if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <j = 5; -} -{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ - const int foo = 10; -} - -; return 0; } -EOF -if { (eval echo configure:3393: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_c_const=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_c_const=no -fi -rm -f conftest* -fi - -echo "$ac_t""$ac_cv_c_const" 1>&6 -if test $ac_cv_c_const = no; then - cat >> confdefs.h <<\EOF -#define const -EOF - -fi - -echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:3414: checking for inline" >&5 -if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_cv_c_inline=no -for ac_kw in inline __inline__ __inline; do - cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_c_inline=$ac_kw; break -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 -fi -rm -f conftest* -done - -fi - -echo "$ac_t""$ac_cv_c_inline" 1>&6 -case "$ac_cv_c_inline" in - inline | yes) ;; - no) cat >> confdefs.h <<\EOF -#define inline -EOF - ;; - *) cat >> confdefs.h <&6 -echo "configure:3454: checking whether char is unsigned" >&5 -if eval "test \"`echo '$''{'ac_cv_c_char_unsigned'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$GCC" = yes; then - # GCC predefines this symbol on systems where it applies. -cat > conftest.$ac_ext <&5 | - egrep "yes" >/dev/null 2>&1; then - rm -rf conftest* - ac_cv_c_char_unsigned=yes -else - rm -rf conftest* - ac_cv_c_char_unsigned=no -fi -rm -f conftest* - -else -if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else - cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - ac_cv_c_char_unsigned=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_c_char_unsigned=no -fi -rm -fr conftest* -fi - -fi -fi - -echo "$ac_t""$ac_cv_c_char_unsigned" 1>&6 -if test $ac_cv_c_char_unsigned = yes && test "$GCC" != yes; then - cat >> confdefs.h <<\EOF -#define __CHAR_UNSIGNED__ 1 -EOF - -fi - -echo $ac_n "checking for long double""... $ac_c" 1>&6 -echo "configure:3517: checking for long double" >&5 -if eval "test \"`echo '$''{'ac_cv_c_long_double'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$GCC" = yes; then - ac_cv_c_long_double=yes -else -if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else - cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - ac_cv_c_long_double=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_c_long_double=no -fi -rm -fr conftest* -fi - -fi -fi - -echo "$ac_t""$ac_cv_c_long_double" 1>&6 -if test $ac_cv_c_long_double = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_LONG_DOUBLE 1 -EOF - -fi - - -echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 -echo "configure:3561: checking whether byte ordering is bigendian" >&5 -if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_cv_c_bigendian=unknown -# See if sys/param.h defines the BYTE_ORDER macro. -cat > conftest.$ac_ext < -#include -int main() { - -#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN - bogus endian macros -#endif -; return 0; } -EOF -if { (eval echo configure:3579: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - # It does; now see whether it defined to BIG_ENDIAN or not. -cat > conftest.$ac_ext < -#include -int main() { - -#if BYTE_ORDER != BIG_ENDIAN - not big endian -#endif -; return 0; } -EOF -if { (eval echo configure:3594: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - ac_cv_c_bigendian=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - ac_cv_c_bigendian=no -fi -rm -f conftest* -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 -fi -rm -f conftest* -if test $ac_cv_c_bigendian = unknown; then -if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else - cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - ac_cv_c_bigendian=no -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_c_bigendian=yes -fi -rm -fr conftest* -fi - -fi -fi - -echo "$ac_t""$ac_cv_c_bigendian" 1>&6 -if test $ac_cv_c_bigendian = yes; then - cat >> confdefs.h <<\EOF -#define WORDS_BIGENDIAN 1 -EOF - -fi - - -echo $ac_n "checking size of int *""... $ac_c" 1>&6 -echo "configure:3652: checking size of int *" >&5 -if eval "test \"`echo '$''{'ac_cv_sizeof_int_p'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else - cat > conftest.$ac_ext < -main() -{ - FILE *f=fopen("conftestval", "w"); - if (!f) exit(1); - fprintf(f, "%d\n", sizeof(int *)); - exit(0); -} -EOF -if { (eval echo configure:3671: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - ac_cv_sizeof_int_p=`cat conftestval` -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_sizeof_int_p=0 -fi -rm -fr conftest* -fi - -fi -echo "$ac_t""$ac_cv_sizeof_int_p" 1>&6 -cat >> confdefs.h <&6 -echo "configure:3691: checking size of int" >&5 -if eval "test \"`echo '$''{'ac_cv_sizeof_int'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else - cat > conftest.$ac_ext < -main() -{ - FILE *f=fopen("conftestval", "w"); - if (!f) exit(1); - fprintf(f, "%d\n", sizeof(int)); - exit(0); -} -EOF -if { (eval echo configure:3710: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - ac_cv_sizeof_int=`cat conftestval` -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_sizeof_int=0 -fi -rm -fr conftest* -fi - -fi -echo "$ac_t""$ac_cv_sizeof_int" 1>&6 -cat >> confdefs.h <&6 -echo "configure:3730: checking size of long" >&5 -if eval "test \"`echo '$''{'ac_cv_sizeof_long'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$cross_compiling" = yes; then - { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } -else - cat > conftest.$ac_ext < -main() -{ - FILE *f=fopen("conftestval", "w"); - if (!f) exit(1); - fprintf(f, "%d\n", sizeof(long)); - exit(0); -} -EOF -if { (eval echo configure:3749: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - ac_cv_sizeof_long=`cat conftestval` -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - ac_cv_sizeof_long=0 -fi -rm -fr conftest* -fi - -fi -echo "$ac_t""$ac_cv_sizeof_long" 1>&6 -cat >> confdefs.h <&6 -echo "configure:3786: checking for pthread_create in -lpthread-0.7" >&5 -ac_lib_var=`echo pthread-0.7'_'pthread_create | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lpthread-0.7 $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - - UNIX_THREAD="gtk/threadpsx.cpp" - THREADS_LINK="-lpthread-0.7" - cat >> confdefs.h <<\EOF -#define USE_THREADS 1 -EOF - - -else - echo "$ac_t""no" 1>&6 - - echo $ac_n "checking for pthread_create in -lpthread""... $ac_c" 1>&6 -echo "configure:3832: checking for pthread_create in -lpthread" >&5 -ac_lib_var=`echo pthread'_'pthread_create | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lpthread $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - - UNIX_THREAD="gtk/threadpsx.cpp" - THREADS_LINK="-lpthread" - cat >> confdefs.h <<\EOF -#define USE_THREADS 1 -EOF - - -else - echo "$ac_t""no" 1>&6 -fi - - -fi - - echo $ac_n "checking for pthread_create in -lpthreads""... $ac_c" 1>&6 -echo "configure:3882: checking for pthread_create in -lpthreads" >&5 -ac_lib_var=`echo pthreads'_'pthread_create | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lpthreads $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - - UNIX_THREAD="gtk/threadpsx.cpp" - THREADS_LINK="-lpthreads" - cat >> confdefs.h <<\EOF -#define USE_THREADS 1 -EOF - - -else - echo "$ac_t""no" 1>&6 -fi - - echo $ac_n "checking for sproc""... $ac_c" 1>&6 -echo "configure:3929: checking for sproc" >&5 -if eval "test \"`echo '$''{'ac_cv_func_sproc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char sproc(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_sproc) || defined (__stub___sproc) -choke me -#else -sproc(); -#endif - -; return 0; } -EOF -if { (eval echo configure:3957: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_func_sproc=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_sproc=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'sproc`\" = yes"; then - echo "$ac_t""yes" 1>&6 - - ac_safe=`echo "sys/prctl.h" | sed 'y%./+-%__p_%'` -echo $ac_n "checking for sys/prctl.h""... $ac_c" 1>&6 -echo "configure:3974: checking for sys/prctl.h" >&5 -if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext < -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3984: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - rm -rf conftest* - eval "ac_cv_header_$ac_safe=yes" -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_header_$ac_safe=no" -fi -rm -f conftest* -fi -if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then - echo "$ac_t""yes" 1>&6 - - UNIX_THREAD="gtk/threadsgi.cpp" - cat >> confdefs.h <<\EOF -#define USE_THREADS 1 -EOF - - -else - echo "$ac_t""no" 1>&6 -fi - - -else - echo "$ac_t""no" 1>&6 -fi - -fi - - - - -echo $ac_n "checking for long file names""... $ac_c" 1>&6 -echo "configure:4022: checking for long file names" >&5 -if eval "test \"`echo '$''{'ac_cv_sys_long_file_names'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_cv_sys_long_file_names=yes -# Test for long file names in all the places we know might matter: -# . the current directory, where building will happen -# $prefix/lib where we will be installing things -# $exec_prefix/lib likewise -# eval it to expand exec_prefix. -# $TMPDIR if set, where it might want to write temporary files -# if $TMPDIR is not set: -# /tmp where it might want to write temporary files -# /var/tmp likewise -# /usr/tmp likewise -if test -n "$TMPDIR" && test -d "$TMPDIR" && test -w "$TMPDIR"; then - ac_tmpdirs="$TMPDIR" -else - ac_tmpdirs='/tmp /var/tmp /usr/tmp' -fi -for ac_dir in . $ac_tmpdirs `eval echo $prefix/lib $exec_prefix/lib` ; do - test -d $ac_dir || continue - test -w $ac_dir || continue # It is less confusing to not echo anything here. - (echo 1 > $ac_dir/conftest9012345) 2>/dev/null - (echo 2 > $ac_dir/conftest9012346) 2>/dev/null - val=`cat $ac_dir/conftest9012345 2>/dev/null` - if test ! -f $ac_dir/conftest9012345 || test "$val" != 1; then - ac_cv_sys_long_file_names=no - rm -f $ac_dir/conftest9012345 $ac_dir/conftest9012346 2>/dev/null - break - fi - rm -f $ac_dir/conftest9012345 $ac_dir/conftest9012346 2>/dev/null -done -fi - -echo "$ac_t""$ac_cv_sys_long_file_names" 1>&6 -if test $ac_cv_sys_long_file_names = yes; then - cat >> confdefs.h <<\EOF -#define HAVE_LONG_FILE_NAMES 1 -EOF - -fi - - - - -for ac_prog in 'bison -y' byacc -do -# Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4073: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$YACC"; then - ac_cv_prog_YACC="$YACC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_YACC="$ac_prog" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -YACC="$ac_cv_prog_YACC" -if test -n "$YACC"; then - echo "$ac_t""$YACC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -test -n "$YACC" && break -done -test -n "$YACC" || YACC="yacc" - - -# Extract the first word of "flex", so it can be a program name with args. -set dummy flex; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4106: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$LEX"; then - ac_cv_prog_LEX="$LEX" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_LEX="flex" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex" -fi -fi -LEX="$ac_cv_prog_LEX" -if test -n "$LEX"; then - echo "$ac_t""$LEX" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -if test -z "$LEXLIB" -then - case "$LEX" in - flex*) ac_lib=fl ;; - *) ac_lib=l ;; - esac - echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6 -echo "configure:4139: checking for yywrap in -l$ac_lib" >&5 -ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-l$ac_lib $LIBS" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - LEXLIB="-l$ac_lib" -else - echo "$ac_t""no" 1>&6 -fi - -fi - -echo $ac_n "checking lex output file root""... $ac_c" 1>&6 -echo "configure:4181: checking lex output file root" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - # The minimal lex program is just a single line: %%. But some broken lexes -# (Solaris, I think it was) want two %% lines, so accommodate them. -echo '%% -%%' | $LEX -if test -f lex.yy.c; then - ac_cv_prog_lex_root=lex.yy -elif test -f lexyy.c; then - ac_cv_prog_lex_root=lexyy -else - { echo "configure: error: cannot find output from $LEX; giving up" 1>&2; exit 1; } -fi -fi - -echo "$ac_t""$ac_cv_prog_lex_root" 1>&6 -LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root - -echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6 -echo "configure:4202: checking whether yytext is a pointer" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - # POSIX says lex can declare yytext either as a pointer or an array; the -# default is implementation-dependent. Figure out which it is, since -# not all implementations provide the %pointer and %array declarations. -ac_cv_prog_lex_yytext_pointer=no -echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c -ac_save_LIBS="$LIBS" -LIBS="$LIBS $LEXLIB" -cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - rm -rf conftest* - ac_cv_prog_lex_yytext_pointer=yes -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 -fi -rm -f conftest* -LIBS="$ac_save_LIBS" -rm -f "${LEX_OUTPUT_ROOT}.c" - -fi - -echo "$ac_t""$ac_cv_prog_lex_yytext_pointer" 1>&6 -if test $ac_cv_prog_lex_yytext_pointer = yes; then - cat >> confdefs.h <<\EOF -#define YYTEXT_POINTER 1 -EOF - -fi - - - -CHECK_INCLUDE="-I/usr/include $X_CFLAGS" -CHECK_LIB="-L/lib -L/usr/lib $X_LIBS" - - - -# Make sure we can run config.sub. -if $ac_config_sub sun4 >/dev/null 2>&1; then : -else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } -fi - -echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:4255: checking host system type" >&5 - -host_alias=$host -case "$host_alias" in -NONE) - case $nonopt in - NONE) - if host_alias=`$ac_config_guess`; then : - else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } - fi ;; - *) host_alias=$nonopt ;; - esac ;; -esac - -host=`$ac_config_sub $host_alias` -host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` -host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` -host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` -echo "$ac_t""$host" 1>&6 - -canonical=$host -configuration=$host_alias - - -USE_GTK=1 -USE_UNIX=1 - -TOOLKIT=GTK -TOOLKIT_DEF=__WXGTK__ - -USE_LINUX= -USE_SGI= -USE_HPUX= -USE_SYSV= -USE_SVR4= -USE_AIX= -USE_SUN= -USE_SOLARIS= -USE_SUNOS= -USE_ALPHA= -USE_OSF= -USE_BSD= -USE_FREEBSD= -USE_VMS= -USE_ULTRIX= -USE_DATA_GENERAL= - -case "${canonical}" in - *-hp-hpux* ) - USE_HPUX=1 - cat >> confdefs.h <<\EOF -#define __HPUX__ 1 -EOF - - ;; - *-*-linux* ) - USE_LINUX=1 - cat >> confdefs.h <<\EOF -#define __LINUX__ 1 -EOF - - ;; - *-*-irix5* | *-*-irix6* ) - USE_SGI=1 - USE_SVR4=1 - cat >> confdefs.h <<\EOF -#define __SGI__ 1 -EOF - - cat >> confdefs.h <<\EOF -#define __SVR4__ 1 -EOF - - ;; - *-*-solaris2* ) - USE_SUN=1 - USE_SOLARIS=1 - USE_SVR4=1 - cat >> confdefs.h <<\EOF -#define __SUN__ 1 -EOF - - cat >> confdefs.h <<\EOF -#define __SOLARIS__ 1 -EOF - - cat >> confdefs.h <<\EOF -#define __SVR4__ 1 -EOF - - ;; - *-*-sunos4* ) - USE_SUN=1 - USE_SUNOS=1 - USE_BSD=1 - cat >> confdefs.h <<\EOF -#define __SUN__ 1 -EOF - - cat >> confdefs.h <<\EOF -#define __SUNOS__ 1 -EOF - - cat >> confdefs.h <<\EOF -#define __BSD__ 1 -EOF - - ;; - *-*-freebsd* | *-*-netbsd*) - USE_BSD=1 - USE_FREEBSD=1 - cat >> confdefs.h <<\EOF -#define __FREEBSD__ 1 -EOF - - cat >> confdefs.h <<\EOF -#define __BSD__ 1 -EOF - - ;; - *-*-osf* ) - USE_ALPHA=1 - USE_OSF=1 - cat >> confdefs.h <<\EOF -#define __ALPHA__ 1 -EOF - - cat >> confdefs.h <<\EOF -#define __OSF__ 1 -EOF - - ;; - *-*-dgux5* ) - USE_ALPHA=1 - USE_SVR4=1 - cat >> confdefs.h <<\EOF -#define __ALPHA__ 1 -EOF - - cat >> confdefs.h <<\EOF -#define __SVR4__ 1 -EOF - - ;; - *-*-sysv5* ) - USE_SYSV=1 - USE_SVR4=1 - cat >> confdefs.h <<\EOF -#define __SYSV__ 1 -EOF - - cat >> confdefs.h <<\EOF -#define __SVR4__ 1 -EOF - - ;; - *-*-aix* ) - USE_AIX=1 - USE_SYSV=1 - USE_SVR4=1 - cat >> confdefs.h <<\EOF -#define __AIX__ 1 -EOF - - cat >> confdefs.h <<\EOF -#define __SYSV__ 1 -EOF - - cat >> confdefs.h <<\EOF -#define __SVR4__ 1 -EOF - - ;; - *) - { echo "configure: error: I don't know your system type." 1>&2; exit 1; } -esac - - - -rm -f ${OSTYPE}.system.cache.tmp -touch ${OSTYPE}.system.cache.tmp -touch ${OSTYPE}.system.cache - - -DEFAULT_USE_SHARED=0 -DEFAULT_USE_OPTIMISE=1 -DEFAULT_USE_PROFILE=0 -DEFAULT_USE_DEBUG_FLAG=0 -DEFAULT_USE_DEBUG_INFO=0 -DEFAULT_USE_MEM_TRACING=0 - -DEFAULT_USE_ZLIB=1 -DEFAULT_USE_GDK_IMLIB=1 -DEFAULT_USE_LIBPNG=1 - -DEFAULT_USE_APPLE_IEEE=1 -DEFAULT_USE_STORABLE_CLASSES=1 -DEFAULT_USE_AUTOTRANS=1 -DEFAULT_USE_AFM_FOR_POSTSCRIPT=1 -DEFAULT_WX_NORMALIZED_PS_FONTS=1 - -DEFAULT_USE_IOSTREAMH=1 - -DEFAULT_USE_OPENGL=0 - -DEFAULT_USE_WXCONFIG=1 -DEFAULT_USE_POSTSCRIPT=1 -DEFAULT_USE_IPC=1 -DEFAULT_USE_RESOURCES=1 -DEFAULT_USE_TIMEDATE=1 -DEFAULT_USE_FRACTION=1 -DEFAULT_USE_CONSTRAINTS=1 -DEFAULT_USE_TOOLBAR=1 -DEFAULT_USE_GAUGE=1 -DEFAULT_USE_SCROLLBAR=1 -DEFAULT_USE_DOC_VIEW_ARCHITECTURE=1 -DEFAULT_USE_PRINTING_ARCHITECTURE=1 - -DEFAULT_USE_METAFILE=0 -DEFAULT_USE_HELP=0 -DEFAULT_USE_CLIPBOARD=0 -DEFAULT_USE_VLBOX=0 -DEFAULT_USE_WXGRAPH=0 -DEFAULT_USE_WXTREE=0 -DEFAULT_USE_ENHANCED_DIALOG=0 - -DEFAULT_USE_FORM=0 -DEFAULT_USE_PROLOGIO=1 -DEFAULT_USE_RPC=0 -DEFAULT_USE_WX_RESOURCES=1 - - - -echo $ac_n "checking "for shared"""... $ac_c" 1>&6 -echo "configure:4489: checking "for shared"" >&5 -# Check whether --with-shared or --without-shared was given. -if test "${with_shared+set}" = set; then - withval="$with_shared" - if test "x$with_shared" = xyes; then - ac_cv_use_shared='USE_SHARED="1"' -else - ac_cv_use_shared='USE_SHARED="0"' -fi -else - - LINE=`grep "USE_SHARED" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_shared='USE_SHARED='$DEFAULT_USE_SHARED - -fi - -eval "$ac_cv_use_shared" -echo $ac_cv_use_shared >> ${OSTYPE}.system.cache.tmp -if test "$USE_SHARED" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for optimise"""... $ac_c" 1>&6 -echo "configure:4519: checking "for optimise"" >&5 -# Check whether --with-optimise or --without-optimise was given. -if test "${with_optimise+set}" = set; then - withval="$with_optimise" - if test "x$with_optimise" = xyes; then - ac_cv_use_optimise='USE_OPTIMISE="1"' -else - ac_cv_use_optimise='USE_OPTIMISE="0"' -fi -else - - LINE=`grep "USE_OPTIMISE" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_optimise='USE_OPTIMISE='$DEFAULT_USE_OPTIMISE - -fi - -eval "$ac_cv_use_optimise" -echo $ac_cv_use_optimise >> ${OSTYPE}.system.cache.tmp -if test "$USE_OPTIMISE" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for debug_flag"""... $ac_c" 1>&6 -echo "configure:4549: checking "for debug_flag"" >&5 -# Check whether --with-debug_flag or --without-debug_flag was given. -if test "${with_debug_flag+set}" = set; then - withval="$with_debug_flag" - if test "x$with_debug_flag" = xyes; then - ac_cv_use_debug_flag='USE_DEBUG_FLAG="1"' -else - ac_cv_use_debug_flag='USE_DEBUG_FLAG="0"' -fi -else - - LINE=`grep "USE_DEBUG_FLAG" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_debug_flag='USE_DEBUG_FLAG='$DEFAULT_USE_DEBUG_FLAG - -fi - -eval "$ac_cv_use_debug_flag" -echo $ac_cv_use_debug_flag >> ${OSTYPE}.system.cache.tmp -if test "$USE_DEBUG_FLAG" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for debug_info"""... $ac_c" 1>&6 -echo "configure:4579: checking "for debug_info"" >&5 -# Check whether --with-debug_info or --without-debug_info was given. -if test "${with_debug_info+set}" = set; then - withval="$with_debug_info" - if test "x$with_debug_info" = xyes; then - ac_cv_use_debug_info='USE_DEBUG_INFO="1"' -else - ac_cv_use_debug_info='USE_DEBUG_INFO="0"' -fi -else - - LINE=`grep "USE_DEBUG_INFO" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_debug_info='USE_DEBUG_INFO='$DEFAULT_USE_DEBUG_INFO - -fi - -eval "$ac_cv_use_debug_info" -echo $ac_cv_use_debug_info >> ${OSTYPE}.system.cache.tmp -if test "$USE_DEBUG_INFO" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for mem_tracing"""... $ac_c" 1>&6 -echo "configure:4609: checking "for mem_tracing"" >&5 -# Check whether --with-mem_tracing or --without-mem_tracing was given. -if test "${with_mem_tracing+set}" = set; then - withval="$with_mem_tracing" - if test "x$with_mem_tracing" = xyes; then - ac_cv_use_mem_tracing='USE_MEM_TRACING="1"' -else - ac_cv_use_mem_tracing='USE_MEM_TRACING="0"' -fi -else - - LINE=`grep "USE_MEM_TRACING" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_mem_tracing='USE_MEM_TRACING='$DEFAULT_USE_MEM_TRACING - -fi - -eval "$ac_cv_use_mem_tracing" -echo $ac_cv_use_mem_tracing >> ${OSTYPE}.system.cache.tmp -if test "$USE_MEM_TRACING" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for profile"""... $ac_c" 1>&6 -echo "configure:4639: checking "for profile"" >&5 -# Check whether --with-profile or --without-profile was given. -if test "${with_profile+set}" = set; then - withval="$with_profile" - if test "x$with_profile" = xyes; then - ac_cv_use_profile='USE_PROFILE="1"' -else - ac_cv_use_profile='USE_PROFILE="0"' -fi -else - - LINE=`grep "USE_PROFILE" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_profile='USE_PROFILE='$DEFAULT_USE_PROFILE - -fi - -eval "$ac_cv_use_profile" -echo $ac_cv_use_profile >> ${OSTYPE}.system.cache.tmp -if test "$USE_PROFILE" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - - -echo $ac_n "checking "for zlib"""... $ac_c" 1>&6 -echo "configure:4670: checking "for zlib"" >&5 -# Check whether --with-zlib or --without-zlib was given. -if test "${with_zlib+set}" = set; then - withval="$with_zlib" - if test "x$with_zlib" = xyes; then - ac_cv_use_zlib='USE_ZLIB="1"' -else - ac_cv_use_zlib='USE_ZLIB="0"' -fi -else - - LINE=`grep "USE_ZLIB" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_zlib='USE_ZLIB='$DEFAULT_USE_ZLIB - -fi - -eval "$ac_cv_use_zlib" -echo $ac_cv_use_zlib >> ${OSTYPE}.system.cache.tmp -if test "$USE_ZLIB" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for gdk_imlib"""... $ac_c" 1>&6 -echo "configure:4700: checking "for gdk_imlib"" >&5 -# Check whether --with-gdk_imlib or --without-gdk_imlib was given. -if test "${with_gdk_imlib+set}" = set; then - withval="$with_gdk_imlib" - if test "x$with_gdk_imlib" = xyes; then - ac_cv_use_gdk_imlib='USE_GDK_IMLIB="1"' -else - ac_cv_use_gdk_imlib='USE_GDK_IMLIB="0"' -fi -else - - LINE=`grep "USE_GDK_IMLIB" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_gdk_imlib='USE_GDK_IMLIB='$DEFAULT_USE_GDK_IMLIB - -fi - -eval "$ac_cv_use_gdk_imlib" -echo $ac_cv_use_gdk_imlib >> ${OSTYPE}.system.cache.tmp -if test "$USE_GDK_IMLIB" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for libpng"""... $ac_c" 1>&6 -echo "configure:4730: checking "for libpng"" >&5 -# Check whether --with-libpng or --without-libpng was given. -if test "${with_libpng+set}" = set; then - withval="$with_libpng" - if test "x$with_libpng" = xyes; then - ac_cv_use_libpng='USE_LIBPNG="1"' -else - ac_cv_use_libpng='USE_LIBPNG="0"' -fi -else - - LINE=`grep "USE_LIBPNG" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_libpng='USE_LIBPNG='$DEFAULT_USE_LIBPNG - -fi - -eval "$ac_cv_use_libpng" -echo $ac_cv_use_libpng >> ${OSTYPE}.system.cache.tmp -if test "$USE_LIBPNG" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for opengl"""... $ac_c" 1>&6 -echo "configure:4760: checking "for opengl"" >&5 -# Check whether --with-opengl or --without-opengl was given. -if test "${with_opengl+set}" = set; then - withval="$with_opengl" - if test "x$with_opengl" = xyes; then - ac_cv_use_opengl='USE_OPENGL="1"' -else - ac_cv_use_opengl='USE_OPENGL="0"' -fi -else - - LINE=`grep "USE_OPENGL" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_opengl='USE_OPENGL='$DEFAULT_USE_OPENGL - -fi - -eval "$ac_cv_use_opengl" -echo $ac_cv_use_opengl >> ${OSTYPE}.system.cache.tmp -if test "$USE_OPENGL" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - - -echo $ac_n "checking "for apple_ieee"""... $ac_c" 1>&6 -echo "configure:4791: checking "for apple_ieee"" >&5 -# Check whether --with-apple_ieee or --without-apple_ieee was given. -if test "${with_apple_ieee+set}" = set; then - withval="$with_apple_ieee" - if test "x$with_apple_ieee" = xyes; then - ac_cv_use_apple_ieee='USE_APPLE_IEEE="1"' -else - ac_cv_use_apple_ieee='USE_APPLE_IEEE="0"' -fi -else - - LINE=`grep "USE_APPLE_IEEE" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_apple_ieee='USE_APPLE_IEEE='$DEFAULT_USE_APPLE_IEEE - -fi - -eval "$ac_cv_use_apple_ieee" -echo $ac_cv_use_apple_ieee >> ${OSTYPE}.system.cache.tmp -if test "$USE_APPLE_IEEE" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for storable"""... $ac_c" 1>&6 -echo "configure:4821: checking "for storable"" >&5 -# Check whether --with-storable or --without-storable was given. -if test "${with_storable+set}" = set; then - withval="$with_storable" - if test "x$with_storable" = xyes; then - ac_cv_use_storable='USE_STORABLE_CLASSES="1"' -else - ac_cv_use_storable='USE_STORABLE_CLASSES="0"' -fi -else - - LINE=`grep "USE_STORABLE_CLASSES" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_storable='USE_STORABLE_CLASSES='$DEFAULT_USE_STORABLE_CLASSES - -fi - -eval "$ac_cv_use_storable" -echo $ac_cv_use_storable >> ${OSTYPE}.system.cache.tmp -if test "$USE_STORABLE_CLASSES" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for autotrans"""... $ac_c" 1>&6 -echo "configure:4851: checking "for autotrans"" >&5 -# Check whether --with-autotrans or --without-autotrans was given. -if test "${with_autotrans+set}" = set; then - withval="$with_autotrans" - if test "x$with_autotrans" = xyes; then - ac_cv_use_autotrans='USE_AUTOTRANS="1"' -else - ac_cv_use_autotrans='USE_AUTOTRANS="0"' -fi -else - - LINE=`grep "USE_AUTOTRANS" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_autotrans='USE_AUTOTRANS='$DEFAULT_USE_AUTOTRANS - -fi - -eval "$ac_cv_use_autotrans" -echo $ac_cv_use_autotrans >> ${OSTYPE}.system.cache.tmp -if test "$USE_AUTOTRANS" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for afmfonts"""... $ac_c" 1>&6 -echo "configure:4881: checking "for afmfonts"" >&5 -# Check whether --with-afmfonts or --without-afmfonts was given. -if test "${with_afmfonts+set}" = set; then - withval="$with_afmfonts" - if test "x$with_afmfonts" = xyes; then - ac_cv_use_afmfonts='USE_AFM_FOR_POSTSCRIPT="1"' -else - ac_cv_use_afmfonts='USE_AFM_FOR_POSTSCRIPT="0"' -fi -else - - LINE=`grep "USE_AFM_FOR_POSTSCRIPT" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_afmfonts='USE_AFM_FOR_POSTSCRIPT='$DEFAULT_USE_AFM_FOR_POSTSCRIPT - -fi - -eval "$ac_cv_use_afmfonts" -echo $ac_cv_use_afmfonts >> ${OSTYPE}.system.cache.tmp -if test "$USE_AFM_FOR_POSTSCRIPT" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for normalized"""... $ac_c" 1>&6 -echo "configure:4911: checking "for normalized"" >&5 -# Check whether --with-normalized or --without-normalized was given. -if test "${with_normalized+set}" = set; then - withval="$with_normalized" - if test "x$with_normalized" = xyes; then - ac_cv_use_normalized='WX_NORMALIZED_PS_FONTS="1"' -else - ac_cv_use_normalized='WX_NORMALIZED_PS_FONTS="0"' -fi -else - - LINE=`grep "WX_NORMALIZED_PS_FONTS" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_normalized='WX_NORMALIZED_PS_FONTS='$DEFAULT_WX_NORMALIZED_PS_FONTS - -fi - -eval "$ac_cv_use_normalized" -echo $ac_cv_use_normalized >> ${OSTYPE}.system.cache.tmp -if test "$WX_NORMALIZED_PS_FONTS" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for RPC"""... $ac_c" 1>&6 -echo "configure:4941: checking "for RPC"" >&5 -# Check whether --with-rpc or --without-rpc was given. -if test "${with_rpc+set}" = set; then - withval="$with_rpc" - if test "x$with_rpc" = xyes; then - ac_cv_use_rpc='USE_RPC="1"' -else - ac_cv_use_rpc='USE_RPC="0"' -fi -else - - LINE=`grep "USE_RPC" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_rpc='USE_RPC='$DEFAULT_USE_RPC - -fi - -eval "$ac_cv_use_rpc" -echo $ac_cv_use_rpc >> ${OSTYPE}.system.cache.tmp -if test "$USE_RPC" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for wxresources"""... $ac_c" 1>&6 -echo "configure:4971: checking "for wxresources"" >&5 -# Check whether --with-wxresources or --without-wxresources was given. -if test "${with_wxresources+set}" = set; then - withval="$with_wxresources" - if test "x$with_wxresources" = xyes; then - ac_cv_use_wxresources='USE_WX_RESOURCES="1"' -else - ac_cv_use_wxresources='USE_WX_RESOURCES="0"' -fi -else - - LINE=`grep "USE_WX_RESOURCES" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_wxresources='USE_WX_RESOURCES='$DEFAULT_USE_WX_RESOURCES - -fi - -eval "$ac_cv_use_wxresources" -echo $ac_cv_use_wxresources >> ${OSTYPE}.system.cache.tmp -if test "$USE_WX_RESOURCES" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for prologio"""... $ac_c" 1>&6 -echo "configure:5001: checking "for prologio"" >&5 -# Check whether --with-prologio or --without-prologio was given. -if test "${with_prologio+set}" = set; then - withval="$with_prologio" - if test "x$with_prologio" = xyes; then - ac_cv_use_prologio='USE_PROLOGIO="1"' -else - ac_cv_use_prologio='USE_PROLOGIO="0"' -fi -else - - LINE=`grep "USE_PROLOGIO" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_prologio='USE_PROLOGIO='$DEFAULT_USE_PROLOGIO - -fi - -eval "$ac_cv_use_prologio" -echo $ac_cv_use_prologio >> ${OSTYPE}.system.cache.tmp -if test "$USE_PROLOGIO" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for postscript"""... $ac_c" 1>&6 -echo "configure:5031: checking "for postscript"" >&5 -# Check whether --with-postscript or --without-postscript was given. -if test "${with_postscript+set}" = set; then - withval="$with_postscript" - if test "x$with_postscript" = xyes; then - ac_cv_use_postscript='USE_POSTSCRIPT="1"' -else - ac_cv_use_postscript='USE_POSTSCRIPT="0"' -fi -else - - LINE=`grep "USE_POSTSCRIPT" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_postscript='USE_POSTSCRIPT='$DEFAULT_USE_POSTSCRIPT - -fi - -eval "$ac_cv_use_postscript" -echo $ac_cv_use_postscript >> ${OSTYPE}.system.cache.tmp -if test "$USE_POSTSCRIPT" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for wxconfig"""... $ac_c" 1>&6 -echo "configure:5061: checking "for wxconfig"" >&5 -# Check whether --with-wxconfig or --without-wxconfig was given. -if test "${with_wxconfig+set}" = set; then - withval="$with_wxconfig" - if test "x$with_wxconfig" = xyes; then - ac_cv_use_wxconfig='USE_WXCONFIG="1"' -else - ac_cv_use_wxconfig='USE_WXCONFIG="0"' -fi -else - - LINE=`grep "USE_WXCONFIG" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_wxconfig='USE_WXCONFIG='$DEFAULT_USE_WXCONFIG - -fi - -eval "$ac_cv_use_wxconfig" -echo $ac_cv_use_wxconfig >> ${OSTYPE}.system.cache.tmp -if test "$USE_WXCONFIG" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for metafile"""... $ac_c" 1>&6 -echo "configure:5091: checking "for metafile"" >&5 -# Check whether --with-metafile or --without-metafile was given. -if test "${with_metafile+set}" = set; then - withval="$with_metafile" - if test "x$with_metafile" = xyes; then - ac_cv_use_metafile='USE_METAFILE="1"' -else - ac_cv_use_metafile='USE_METAFILE="0"' -fi -else - - LINE=`grep "USE_METAFILE" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_metafile='USE_METAFILE='$DEFAULT_USE_METAFILE - -fi - -eval "$ac_cv_use_metafile" -echo $ac_cv_use_metafile >> ${OSTYPE}.system.cache.tmp -if test "$USE_METAFILE" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for form"""... $ac_c" 1>&6 -echo "configure:5121: checking "for form"" >&5 -# Check whether --with-form or --without-form was given. -if test "${with_form+set}" = set; then - withval="$with_form" - if test "x$with_form" = xyes; then - ac_cv_use_form='USE_FORM="1"' -else - ac_cv_use_form='USE_FORM="0"' -fi -else - - LINE=`grep "USE_FORM" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_form='USE_FORM='$DEFAULT_USE_FORM - -fi - -eval "$ac_cv_use_form" -echo $ac_cv_use_form >> ${OSTYPE}.system.cache.tmp -if test "$USE_FORM" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for help"""... $ac_c" 1>&6 -echo "configure:5151: checking "for help"" >&5 -# Check whether --with-help or --without-help was given. -if test "${with_help+set}" = set; then - withval="$with_help" - if test "x$with_help" = xyes; then - ac_cv_use_help='USE_HELP="1"' -else - ac_cv_use_help='USE_HELP="0"' -fi -else - - LINE=`grep "USE_HELP" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_help='USE_HELP='$DEFAULT_USE_HELP - -fi - -eval "$ac_cv_use_help" -echo $ac_cv_use_help >> ${OSTYPE}.system.cache.tmp -if test "$USE_HELP" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for IPC"""... $ac_c" 1>&6 -echo "configure:5181: checking "for IPC"" >&5 -# Check whether --with-ipc or --without-ipc was given. -if test "${with_ipc+set}" = set; then - withval="$with_ipc" - if test "x$with_ipc" = xyes; then - ac_cv_use_ipc='USE_IPC="1"' -else - ac_cv_use_ipc='USE_IPC="0"' -fi -else - - LINE=`grep "USE_IPC" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_ipc='USE_IPC='$DEFAULT_USE_IPC - -fi - -eval "$ac_cv_use_ipc" -echo $ac_cv_use_ipc >> ${OSTYPE}.system.cache.tmp -if test "$USE_IPC" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for enhanced dialog"""... $ac_c" 1>&6 -echo "configure:5211: checking "for enhanced dialog"" >&5 -# Check whether --with-enhanceddialog or --without-enhanceddialog was given. -if test "${with_enhanceddialog+set}" = set; then - withval="$with_enhanceddialog" - if test "x$with_enhanceddialog" = xyes; then - ac_cv_use_enhanceddialog='USE_ENHANCED_DIALOG="1"' -else - ac_cv_use_enhanceddialog='USE_ENHANCED_DIALOG="0"' -fi -else - - LINE=`grep "USE_ENHANCED_DIALOG" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_enhanceddialog='USE_ENHANCED_DIALOG='$DEFAULT_USE_ENHANCED_DIALOG - -fi - -eval "$ac_cv_use_enhanceddialog" -echo $ac_cv_use_enhanceddialog >> ${OSTYPE}.system.cache.tmp -if test "$USE_ENHANCED_DIALOG" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for resources"""... $ac_c" 1>&6 -echo "configure:5241: checking "for resources"" >&5 -# Check whether --with-resources or --without-resources was given. -if test "${with_resources+set}" = set; then - withval="$with_resources" - if test "x$with_resources" = xyes; then - ac_cv_use_resources='USE_RESOURCES="1"' -else - ac_cv_use_resources='USE_RESOURCES="0"' -fi -else - - LINE=`grep "USE_RESOURCES" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_resources='USE_RESOURCES='$DEFAULT_USE_RESOURCES - -fi - -eval "$ac_cv_use_resources" -echo $ac_cv_use_resources >> ${OSTYPE}.system.cache.tmp -if test "$USE_RESOURCES" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for clipboard"""... $ac_c" 1>&6 -echo "configure:5271: checking "for clipboard"" >&5 -# Check whether --with-clipboard or --without-clipboard was given. -if test "${with_clipboard+set}" = set; then - withval="$with_clipboard" - if test "x$with_clipboard" = xyes; then - ac_cv_use_clipboard='USE_CLIPBOARD="1"' -else - ac_cv_use_clipboard='USE_CLIPBOARD="0"' -fi -else - - LINE=`grep "USE_CLIPBOARD" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_clipboard='USE_CLIPBOARD='$DEFAULT_USE_CLIPBOARD - -fi - -eval "$ac_cv_use_clipboard" -echo $ac_cv_use_clipboard >> ${OSTYPE}.system.cache.tmp -if test "$USE_CLIPBOARD" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for timedate"""... $ac_c" 1>&6 -echo "configure:5301: checking "for timedate"" >&5 -# Check whether --with-timedate or --without-timedate was given. -if test "${with_timedate+set}" = set; then - withval="$with_timedate" - if test "x$with_timedate" = xyes; then - ac_cv_use_timedate='USE_TIMEDATE="1"' -else - ac_cv_use_timedate='USE_TIMEDATE="0"' -fi -else - - LINE=`grep "USE_TIMEDATE" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_timedate='USE_TIMEDATE='$DEFAULT_USE_TIMEDATE - -fi - -eval "$ac_cv_use_timedate" -echo $ac_cv_use_timedate >> ${OSTYPE}.system.cache.tmp -if test "$USE_TIMEDATE" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for fraction"""... $ac_c" 1>&6 -echo "configure:5331: checking "for fraction"" >&5 -# Check whether --with-fraction or --without-fraction was given. -if test "${with_fraction+set}" = set; then - withval="$with_fraction" - if test "x$with_fraction" = xyes; then - ac_cv_use_fraction='USE_FRACTION="1"' -else - ac_cv_use_fraction='USE_FRACTION="0"' -fi -else - - LINE=`grep "USE_FRACTION" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_fraction='USE_FRACTION='$DEFAULT_USE_FRACTION - -fi - -eval "$ac_cv_use_fraction" -echo $ac_cv_use_fraction >> ${OSTYPE}.system.cache.tmp -if test "$USE_FRACTION" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for constrains"""... $ac_c" 1>&6 -echo "configure:5361: checking "for constrains"" >&5 -# Check whether --with-constraints or --without-constraints was given. -if test "${with_constraints+set}" = set; then - withval="$with_constraints" - if test "x$with_constraints" = xyes; then - ac_cv_use_constraints='USE_CONSTRAINTS="1"' -else - ac_cv_use_constraints='USE_CONSTRAINTS="0"' -fi -else - - LINE=`grep "USE_CONSTRAINTS" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_constraints='USE_CONSTRAINTS='$DEFAULT_USE_CONSTRAINTS - -fi - -eval "$ac_cv_use_constraints" -echo $ac_cv_use_constraints >> ${OSTYPE}.system.cache.tmp -if test "$USE_CONSTRAINTS" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for toolbar"""... $ac_c" 1>&6 -echo "configure:5391: checking "for toolbar"" >&5 -# Check whether --with-toolbar or --without-toolbar was given. -if test "${with_toolbar+set}" = set; then - withval="$with_toolbar" - if test "x$with_toolbar" = xyes; then - ac_cv_use_toolbar='USE_TOOLBAR="1"' -else - ac_cv_use_toolbar='USE_TOOLBAR="0"' -fi -else - - LINE=`grep "USE_TOOLBAR" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_toolbar='USE_TOOLBAR='$DEFAULT_USE_TOOLBAR - -fi - -eval "$ac_cv_use_toolbar" -echo $ac_cv_use_toolbar >> ${OSTYPE}.system.cache.tmp -if test "$USE_TOOLBAR" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for gauge"""... $ac_c" 1>&6 -echo "configure:5421: checking "for gauge"" >&5 -# Check whether --with-gauge or --without-gauge was given. -if test "${with_gauge+set}" = set; then - withval="$with_gauge" - if test "x$with_gauge" = xyes; then - ac_cv_use_gauge='USE_GAUGE="1"' -else - ac_cv_use_gauge='USE_GAUGE="0"' -fi -else - - LINE=`grep "USE_GAUGE" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_gauge='USE_GAUGE='$DEFAULT_USE_GAUGE - -fi - -eval "$ac_cv_use_gauge" -echo $ac_cv_use_gauge >> ${OSTYPE}.system.cache.tmp -if test "$USE_GAUGE" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for vllist"""... $ac_c" 1>&6 -echo "configure:5451: checking "for vllist"" >&5 -# Check whether --with-vllist or --without-vllist was given. -if test "${with_vllist+set}" = set; then - withval="$with_vllist" - if test "x$with_vllist" = xyes; then - ac_cv_use_vllist='USE_VLBOX="1"' -else - ac_cv_use_vllist='USE_VLBOX="0"' -fi -else - - LINE=`grep "USE_VLBOX" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_vllist='USE_VLBOX='$DEFAULT_USE_VLBOX - -fi - -eval "$ac_cv_use_vllist" -echo $ac_cv_use_vllist >> ${OSTYPE}.system.cache.tmp -if test "$USE_VLBOX" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for scrollbar"""... $ac_c" 1>&6 -echo "configure:5481: checking "for scrollbar"" >&5 -# Check whether --with-scrollbar or --without-scrollbar was given. -if test "${with_scrollbar+set}" = set; then - withval="$with_scrollbar" - if test "x$with_scrollbar" = xyes; then - ac_cv_use_scrollbar='USE_SCROLLBAR="1"' -else - ac_cv_use_scrollbar='USE_SCROLLBAR="0"' -fi -else - - LINE=`grep "USE_SCROLLBAR" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_scrollbar='USE_SCROLLBAR='$DEFAULT_USE_SCROLLBAR - -fi - -eval "$ac_cv_use_scrollbar" -echo $ac_cv_use_scrollbar >> ${OSTYPE}.system.cache.tmp -if test "$USE_SCROLLBAR" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for docview"""... $ac_c" 1>&6 -echo "configure:5511: checking "for docview"" >&5 -# Check whether --with-docview or --without-docview was given. -if test "${with_docview+set}" = set; then - withval="$with_docview" - if test "x$with_docview" = xyes; then - ac_cv_use_docview='USE_DOC_VIEW_ARCHITECTURE="1"' -else - ac_cv_use_docview='USE_DOC_VIEW_ARCHITECTURE="0"' -fi -else - - LINE=`grep "USE_DOC_VIEW_ARCHITECTURE" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_docview='USE_DOC_VIEW_ARCHITECTURE='$DEFAULT_USE_DOC_VIEW_ARCHITECTURE - -fi - -eval "$ac_cv_use_docview" -echo $ac_cv_use_docview >> ${OSTYPE}.system.cache.tmp -if test "$USE_DOC_VIEW_ARCHITECTURE" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for printarch"""... $ac_c" 1>&6 -echo "configure:5541: checking "for printarch"" >&5 -# Check whether --with-printarch or --without-printarch was given. -if test "${with_printarch+set}" = set; then - withval="$with_printarch" - if test "x$with_printarch" = xyes; then - ac_cv_use_printarch='USE_PRINTING_ARCHITECTURE="1"' -else - ac_cv_use_printarch='USE_PRINTING_ARCHITECTURE="0"' -fi -else - - LINE=`grep "USE_PRINTING_ARCHITECTURE" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_printarch='USE_PRINTING_ARCHITECTURE='$DEFAULT_USE_PRINTING_ARCHITECTURE - -fi - -eval "$ac_cv_use_printarch" -echo $ac_cv_use_printarch >> ${OSTYPE}.system.cache.tmp -if test "$USE_PRINTING_ARCHITECTURE" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for typetree"""... $ac_c" 1>&6 -echo "configure:5571: checking "for typetree"" >&5 -# Check whether --with-typetree or --without-typetree was given. -if test "${with_typetree+set}" = set; then - withval="$with_typetree" - if test "x$with_typetree" = xyes; then - ac_cv_use_typetree='USE_TYPETREE="1"' -else - ac_cv_use_typetree='USE_TYPETREE="0"' -fi -else - - LINE=`grep "USE_TYPETREE" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_typetree='USE_TYPETREE='$DEFAULT_USE_TYPETREE - -fi - -eval "$ac_cv_use_typetree" -echo $ac_cv_use_typetree >> ${OSTYPE}.system.cache.tmp -if test "$USE_TYPETREE" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for wxgraph"""... $ac_c" 1>&6 -echo "configure:5601: checking "for wxgraph"" >&5 -# Check whether --with-wxgraph or --without-wxgraph was given. -if test "${with_wxgraph+set}" = set; then - withval="$with_wxgraph" - if test "x$with_wxgraph" = xyes; then - ac_cv_use_wxgraph='USE_WXGRAPH="1"' -else - ac_cv_use_wxgraph='USE_WXGRAPH="0"' -fi -else - - LINE=`grep "USE_WXGRAPH" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_wxgraph='USE_WXGRAPH='$DEFAULT_USE_WXGRAPH - -fi - -eval "$ac_cv_use_wxgraph" -echo $ac_cv_use_wxgraph >> ${OSTYPE}.system.cache.tmp -if test "$USE_WXGRAPH" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - -echo $ac_n "checking "for wxtree"""... $ac_c" 1>&6 -echo "configure:5631: checking "for wxtree"" >&5 -# Check whether --with-wxtree or --without-wxtree was given. -if test "${with_wxtree+set}" = set; then - withval="$with_wxtree" - if test "x$with_wxtree" = xyes; then - ac_cv_use_wxtree='USE_WXTREE="1"' -else - ac_cv_use_wxtree='USE_WXTREE="0"' -fi -else - - LINE=`grep "USE_WXTREE" ${OSTYPE}.system.cache` - if test "x$LINE" != x ; then - eval "DEFAULT_$LINE" - fi - ac_cv_use_wxtree='USE_WXTREE='$DEFAULT_USE_WXTREE - -fi - -eval "$ac_cv_use_wxtree" -echo $ac_cv_use_wxtree >> ${OSTYPE}.system.cache.tmp -if test "$USE_WXTREE" = 1; then - echo "$ac_t""yes" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - - - -ZLIB=NONE -if test "$USE_ZLIB" = 1 ; then - ZLIB="ZLIB" -fi - -GDK_IMLIB=NONE -if test "$USE_GDK_IMLIB" = 1 ; then - GDK_IMLIB="GDK_IMLIB" -fi - -LIBPNG=NONE -if test "$USE_LIBPNG" = 1 ; then - LIBPNG="LIBPNG" -fi - -APPLE_IEEE=NONE -if test "$USE_APPLE_IEEE" = 1 ; then - APPLE_IEEE="APPLE_IEEE" - cat >> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <<\EOF -#define __UNIX__ 1 -EOF - -fi - - -GUI_TK_INCLUDE= -GUI_TK_LIBRARY= -GUI_TK_LINK= - -if test "$USE_GTK" = 1; then - # Check whether --with-gtk-prefix or --without-gtk-prefix was given. -if test "${with_gtk_prefix+set}" = set; then - withval="$with_gtk_prefix" - gtk_config_prefix="$withval" -else - gtk_config_prefix="" -fi - -# Check whether --with-gtk-exec-prefix or --without-gtk-exec-prefix was given. -if test "${with_gtk_exec_prefix+set}" = set; then - withval="$with_gtk_exec_prefix" - gtk_config_exec_prefix="$withval" -else - gtk_config_exec_prefix="" -fi - - - if test x$gtk_config_exec_prefix != x ; then - gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix" - if test x${GTK_CONFIG+set} != xset ; then - GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config - fi - fi - if test x$gtk_config_prefix != x ; then - gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix" - if test x${GTK_CONFIG+set} != xset ; then - GTK_CONFIG=$gtk_config_prefix/bin/gtk-config - fi - fi - - # Extract the first word of "gtk-config", so it can be a program name with args. -set dummy gtk-config; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:6065: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_path_GTK_CONFIG'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - case "$GTK_CONFIG" in - /*) - ac_cv_path_GTK_CONFIG="$GTK_CONFIG" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_path_GTK_CONFIG="$ac_dir/$ac_word" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_GTK_CONFIG" && ac_cv_path_GTK_CONFIG="no" - ;; -esac -fi -GTK_CONFIG="$ac_cv_path_GTK_CONFIG" -if test -n "$GTK_CONFIG"; then - echo "$ac_t""$GTK_CONFIG" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - min_gtk_version=0.99.7 - echo $ac_n "checking for GTK - version >= $min_gtk_version""... $ac_c" 1>&6 -echo "configure:6096: checking for GTK - version >= $min_gtk_version" >&5 - no_gtk="" - if test "$GTK_CONFIG" != "no" ; then - GTK_CFLAGS=`$GTK_CONFIG --cflags` - GTK_LIBS=`$GTK_CONFIG --libs` - ac_save_CFLAGS="$CFLAGS" - ac_save_LIBS="$LIBS" - CFLAGS="$CFLAGS $GTK_CFLAGS" - LIBS="$LIBS $GTK_LIBS" - if test "$cross_compiling" = yes; then - echo $ac_n "cross compiling; assumed OK... $ac_c" -else - cat > conftest.$ac_ext < -#include - -int -main () -{ - int major, minor, micro; - - if (sscanf("$min_gtk_version", "%d.%d.%d", &major, &minor, µ) != 3) { - printf("%s, bad version string\n", "$min_gtk_version"); - exit(1); - } - - return !((gtk_major_version > major) || - ((gtk_major_version == major) && (gtk_minor_version > minor)) || - ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro))); -} - -EOF -if { (eval echo configure:6131: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null -then - : -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -fr conftest* - no_gtk=yes -fi -rm -fr conftest* -fi - - CFLAGS="$ac_save_CFLAGS" - LIBS="$ac_save_LIBS" - else - no_gtk=yes - fi - if test "x$no_gtk" = x ; then - echo "$ac_t""yes" 1>&6 - - GUI_TK_INCLUDE="$GTK_CFLAGS" - GUI_TK_LIBRARY="$GTK_LIBS" - - else - echo "$ac_t""no" 1>&6 - GTK_CFLAGS="" - GTK_LIBS="" - { echo "configure: error: Are gtk-config and the GTK in path and up-to-date?" 1>&2; exit 1; } - fi - - - - cat >> confdefs.h <<\EOF -#define __WXGTK__ 1 -EOF - -fi - - - - - - - - -OPENGL_INCLUDE= -OPENGL_LIBRARY= -OPENGL_LINK= - -if test "$USE_OPENGL" = 1; then - echo $ac_n "checking for OpenGL includes""... $ac_c" 1>&6 -echo "configure:6182: checking for OpenGL includes" >&5 - -ac_find_includes= -for ac_dir in $SEARCH_INCLUDE; - do - if test -f "$ac_dir/GL/gl.h"; then - ac_find_includes=$ac_dir - break - fi - done - - if test "$ac_find_includes" != "" ; then - OPENGL_INCLUDE="-I$ac_find_includes" - echo "$ac_t""found $ac_find_includes" 1>&6 - echo $ac_n "checking for OpenGL library""... $ac_c" 1>&6 -echo "configure:6197: checking for OpenGL library" >&5 - -ac_find_libraries= -for ac_dir in $SEARCH_LIB; - do - for ac_extension in a so sl; do - if test -f "$ac_dir/libGL.$ac_extension"; then - ac_find_libraries=$ac_dir - break 2 - fi - done - done - - if test "$ac_find_libraries" != "" ; then - - ac_path_to_include=$ac_find_includes - echo "$CHECK_INCLUDE" | grep "\-I$ac_find_includes" > /dev/null - result=$? - if test $result = 0; then - ac_path_to_include="" - else - ac_path_to_include="-I$ac_find_includes" - fi - - - echo "$CHECK_LIB" | grep "\-L$ac_find_libraries" > /dev/null - result=$? - if test $result = 0; then - ac_path_to_link="" - else - ac_path_to_link="-L$ac_find_libraries" - fi - - CHECK_LINK="$CHECK_INCLUDE $ac_path_to_link" - CHECK_INCLUDE="$CHECK_INCLUDE $ac_path_to_include" - OPENGL_LIBRARY="$ac_path_to_link" - OPENGL_INCLUDE="$ac_path_to_include" - OPENGL_LINK="-lGL" - echo "$ac_t""found OpenGL at $ac_find_libraries" 1>&6 - else - -ac_find_libraries= -for ac_dir in $SEARCH_LIB; - do - for ac_extension in a so sl; do - if test -f "$ac_dir/libMesaGL.$ac_extension"; then - ac_find_libraries=$ac_dir - break 2 - fi - done - done - - if test "$ac_find_libraries" != "" ; then - - ac_path_to_include=$ac_find_includes - echo "$CHECK_INCLUDE" | grep "\-I$ac_find_includes" > /dev/null - result=$? - if test $result = 0; then - ac_path_to_include="" - else - ac_path_to_include="-I$ac_find_includes" - fi - - - echo "$CHECK_LIB" | grep "\-L$ac_find_libraries" > /dev/null - result=$? - if test $result = 0; then - ac_path_to_link="" - else - ac_path_to_link="-L$ac_find_libraries" - fi - - CHECK_LINK="$CHECK_INCLUDE $ac_path_to_link" - CHECK_INCLUDE="$CHECK_INCLUDE $ac_path_to_include" - OPENGL_LIBRARY="$ac_path_to_link" - OPENGL_INCLUDE="$ac_path_to_include" - OPENGL_LINK="-lMesaGL" - echo "$ac_t""found MESA at $ac_find_libraries" 1>&6 - else - { echo "configure: error: no" 1>&2; exit 1; } - fi - fi - else - { echo "configure: error: no" 1>&2; exit 1; } - fi -fi - - if test "$USE_GDK_IMLIB" = 1; then - cat >> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <> confdefs.h <<\EOF -#define SVR4 1 -EOF - - ;; - - *-*-solaris2* ) - if test "${CC}" != "gcc" ; then - PICFLAGS="-KPIC" - else - PICFLAGS="-fPIC" - fi - CREATE_SHARED=sharedSolaris2 - cat >> confdefs.h <<\EOF -#define SVR4 1 -EOF - - ;; - - *-*-sunos4* ) - if test "${CC}" != "gcc" ; then - PICFLAGS="-PIC" - else - PICFLAGS="-fPIC" - fi - LDFLAGS="-Wl,+s" - CREATE_SHARED=sharedSunos4 - cat >> confdefs.h <<\EOF -#define BSD 1 -EOF - - ;; - - *-*-freebsd* | *-*-netbsd*) - PICFLAGS=-fPIC - CREATE_SHARED=sharedBsd - cat >> confdefs.h <<\EOF -#define BSD 1 -EOF - - ;; - - *-*-osf* ) - PICFLAGS="-fPIC" - CREATE_SHARED=sharedOSF - ;; - - *-*-dgux5* ) - if test "${CC}" != "gcc" ; then - PICFLAGS="-K PIC" - else - PICFLAGS="-fPIC" - fi - CREATE_SHARED=sharedDgux - cat >> confdefs.h <<\EOF -#define SVR4 1 -EOF - - ;; - - *-*-sysv5* ) - if test "${CC}" != "gcc" ; then - PICFLAGS="-K PIC" - else - PICFLAGS="-fPIC" - fi - CREATE_SHARED=sharedSysV - cat >> confdefs.h <<\EOF -#define SVR4 1 -EOF - - ;; - - *-*-aix* ) - if test "${CC}" != "gcc" ; then - PICFLAGS="-bM\:SRE" - else - PICFLAGS="-fPIC" - fi - CREATE_SHARED=sharedAIX - cat >> confdefs.h <<\EOF -#define SYSV 1 -EOF - - ;; - - *) - CREATE_SHARED= - PICFLAGS= -esac - -if test "x$GCC" = xyes; then - CFLAGS="${CFLAGS} -Wall" -fi - -if test "x$GXX" = xyes; then - CXXFLAGS="${CXXFLAGS} -Wall" -fi - -if test "$USE_SHARED" != 1; then - CREATE_SHARED= - PICFLAGS= -fi - - - - - - -echo $OS >> system.list -echo $OS >> ../../system.list - - -trap '' 1 2 15 -cat > confcache <<\EOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs. It is not useful on other systems. -# If it contains results you don't want to keep, you may remove or edit it. -# -# By default, configure uses ./config.cache as the cache file, -# creating it if it does not exist already. You can give configure -# the --cache-file=FILE option to use a different cache file; that is -# what configure does when it calls configure scripts in -# subdirectories, so they share the cache. -# Giving --cache-file=/dev/null disables caching, for debugging configure. -# config.status only pays attention to the cache file if you give it the -# --recheck option to rerun configure. -# -EOF -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -(set) 2>&1 | - case `(ac_space=' '; set) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote substitution - # turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - -e "s/'/'\\\\''/g" \ - -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' - ;; - esac >> confcache -if cmp -s $cache_file confcache; then - : -else - if test -w $cache_file; then - echo "updating cache $cache_file" - cat confcache > $cache_file - else - echo "not updating unwritable cache $cache_file" - fi -fi -rm -f confcache - -trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15 - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# Any assignment to VPATH causes Sun make to only execute -# the first set of double-colon rules, so remove it if not needed. -# If there is a colon in the path, we need to keep it. -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d' -fi - -trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15 - -DEFS=-DHAVE_CONFIG_H - -# Without the "./", some shells look in PATH for config.status. -: ${CONFIG_STATUS=./config.status} - -echo creating $CONFIG_STATUS -rm -f $CONFIG_STATUS -cat > $CONFIG_STATUS </dev/null | sed 1q`: -# -# $0 $ac_configure_args -# -# Compiler output produced by configure, useful for debugging -# configure, is in ./config.log if it exists. - -ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]" -for ac_option -do - case "\$ac_option" in - -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) - echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" - exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; - -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12" - exit 0 ;; - -help | --help | --hel | --he | --h) - echo "\$ac_cs_usage"; exit 0 ;; - *) echo "\$ac_cs_usage"; exit 1 ;; - esac -done - -ac_given_srcdir=$srcdir -ac_given_INSTALL="$INSTALL" - -trap 'rm -fr `echo "../../src/gtk/setup/substit ../../include/wx/gtk/setup.h:../../src/gtk/setup/setup.hin" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 -EOF -cat >> $CONFIG_STATUS < conftest.subs <<\\CEOF -$ac_vpsub -$extrasub -s%@CFLAGS@%$CFLAGS%g -s%@CPPFLAGS@%$CPPFLAGS%g -s%@CXXFLAGS@%$CXXFLAGS%g -s%@DEFS@%$DEFS%g -s%@LDFLAGS@%$LDFLAGS%g -s%@LIBS@%$LIBS%g -s%@exec_prefix@%$exec_prefix%g -s%@prefix@%$prefix%g -s%@program_transform_name@%$program_transform_name%g -s%@bindir@%$bindir%g -s%@sbindir@%$sbindir%g -s%@libexecdir@%$libexecdir%g -s%@datadir@%$datadir%g -s%@sysconfdir@%$sysconfdir%g -s%@sharedstatedir@%$sharedstatedir%g -s%@localstatedir@%$localstatedir%g -s%@libdir@%$libdir%g -s%@includedir@%$includedir%g -s%@oldincludedir@%$oldincludedir%g -s%@infodir@%$infodir%g -s%@mandir@%$mandir%g -s%@WXBASEDIR@%$WXBASEDIR%g -s%@CC@%$CC%g -s%@CPP@%$CPP%g -s%@CXX@%$CXX%g -s%@CXXCPP@%$CXXCPP%g -s%@RANLIB@%$RANLIB%g -s%@AR@%$AR%g -s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g -s%@INSTALL_DATA@%$INSTALL_DATA%g -s%@LN_S@%$LN_S%g -s%@AWK@%$AWK%g -s%@X_CFLAGS@%$X_CFLAGS%g -s%@X_PRE_LIBS@%$X_PRE_LIBS%g -s%@X_LIBS@%$X_LIBS%g -s%@X_EXTRA_LIBS@%$X_EXTRA_LIBS%g -s%@GTK_JOYSTICK@%$GTK_JOYSTICK%g -s%@LIBOBJS@%$LIBOBJS%g -s%@UNIX_THREAD@%$UNIX_THREAD%g -s%@THREADS_LINK@%$THREADS_LINK%g -s%@YACC@%$YACC%g -s%@LEX@%$LEX%g -s%@LEXLIB@%$LEXLIB%g -s%@LEX_OUTPUT_ROOT@%$LEX_OUTPUT_ROOT%g -s%@host@%$host%g -s%@host_alias@%$host_alias%g -s%@host_cpu@%$host_cpu%g -s%@host_vendor@%$host_vendor%g -s%@host_os@%$host_os%g -s%@WXDEBUG@%$WXDEBUG%g -s%@WXDEBUG_DEFINE@%$WXDEBUG_DEFINE%g -s%@PROFILE@%$PROFILE%g -s%@OPTIMISE@%$OPTIMISE%g -s%@RPC@%$RPC%g -s%@WXRESOURCES@%$WXRESOURCES%g -s%@PROLOGIO@%$PROLOGIO%g -s%@PROLOGIOSRC@%$PROLOGIOSRC%g -s%@POSTSCRIPTDC@%$POSTSCRIPTDC%g -s%@METAFILE@%$METAFILE%g -s%@FORM@%$FORM%g -s%@HELP@%$HELP%g -s%@IPC@%$IPC%g -s%@ENHDIALOGBOX@%$ENHDIALOGBOX%g -s%@XRESOURCES@%$XRESOURCES%g -s%@CLIPBOARD@%$CLIPBOARD%g -s%@CONSTRAINTS@%$CONSTRAINTS%g -s%@TIMEDATE@%$TIMEDATE%g -s%@FRACTION@%$FRACTION%g -s%@TOOLBAR@%$TOOLBAR%g -s%@GAUGE@%$GAUGE%g -s%@VIRLISTBOX@%$VIRLISTBOX%g -s%@SCROLLBAR@%$SCROLLBAR%g -s%@DOCVIEW@%$DOCVIEW%g -s%@PRINTPREVIEW@%$PRINTPREVIEW%g -s%@TYPETREE@%$TYPETREE%g -s%@WXGRAPH@%$WXGRAPH%g -s%@WXTREE@%$WXTREE%g -s%@GTK_CONFIG@%$GTK_CONFIG%g -s%@GTK_CFLAGS@%$GTK_CFLAGS%g -s%@GTK_LIBS@%$GTK_LIBS%g -s%@GUI_TK_INCLUDE@%$GUI_TK_INCLUDE%g -s%@GUI_TK_LIBRARY@%$GUI_TK_LIBRARY%g -s%@GUI_TK_LINK@%$GUI_TK_LINK%g -s%@TOOLKIT@%$TOOLKIT%g -s%@TOOLKIT_DEF@%$TOOLKIT_DEF%g -s%@OPENGL_INCLUDE@%$OPENGL_INCLUDE%g -s%@OPENGL_LIBRARY@%$OPENGL_LIBRARY%g -s%@OPENGL_LINK@%$OPENGL_LINK%g -s%@GLCANVAS@%$GLCANVAS%g -s%@OS@%$OS%g -s%@PICFLAGS@%$PICFLAGS%g -s%@CREATE_SHARED@%$CREATE_SHARED%g - -CEOF -EOF - -cat >> $CONFIG_STATUS <<\EOF - -# Split the substitutions into bite-sized pieces for seds with -# small command number limits, like on Digital OSF/1 and HP-UX. -ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script. -ac_file=1 # Number of current file. -ac_beg=1 # First line for current file. -ac_end=$ac_max_sed_cmds # Line after last line for current file. -ac_more_lines=: -ac_sed_cmds="" -while $ac_more_lines; do - if test $ac_beg -gt 1; then - sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file - else - sed "${ac_end}q" conftest.subs > conftest.s$ac_file - fi - if test ! -s conftest.s$ac_file; then - ac_more_lines=false - rm -f conftest.s$ac_file - else - if test -z "$ac_sed_cmds"; then - ac_sed_cmds="sed -f conftest.s$ac_file" - else - ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file" - fi - ac_file=`expr $ac_file + 1` - ac_beg=$ac_end - ac_end=`expr $ac_end + $ac_max_sed_cmds` - fi -done -if test -z "$ac_sed_cmds"; then - ac_sed_cmds=cat -fi -EOF - -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; - esac - - # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories. - - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" - ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`" - # A "../" for each directory in $ac_dir_suffix. - ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'` - else - ac_dir_suffix= ac_dots= - fi - - case "$ac_given_srcdir" in - .) srcdir=. - if test -z "$ac_dots"; then top_srcdir=. - else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;; - /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;; - *) # Relative path. - srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix" - top_srcdir="$ac_dots$ac_given_srcdir" ;; - esac - - case "$ac_given_INSTALL" in - [/$]*) INSTALL="$ac_given_INSTALL" ;; - *) INSTALL="$ac_dots$ac_given_INSTALL" ;; - esac - - echo creating "$ac_file" - rm -f "$ac_file" - configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure." - case "$ac_file" in - *Makefile*) ac_comsub="1i\\ -# $configure_input" ;; - *) ac_comsub= ;; - esac - - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - sed -e "$ac_comsub -s%@configure_input@%$configure_input%g -s%@srcdir@%$srcdir%g -s%@top_srcdir@%$top_srcdir%g -s%@INSTALL@%$INSTALL%g -" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file -fi; done -rm -f conftest.s* - -# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where -# NAME is the cpp macro being defined and VALUE is the value it is being given. -# -# ac_d sets the value in "#define NAME VALUE" lines. -ac_dA='s%^\([ ]*\)#\([ ]*define[ ][ ]*\)' -ac_dB='\([ ][ ]*\)[^ ]*%\1#\2' -ac_dC='\3' -ac_dD='%g' -# ac_u turns "#undef NAME" with trailing blanks into "#define NAME VALUE". -ac_uA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_uB='\([ ]\)%\1#\2define\3' -ac_uC=' ' -ac_uD='\4%g' -# ac_e turns "#undef NAME" without trailing blanks into "#define NAME VALUE". -ac_eA='s%^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' -ac_eB='$%\1#\2define\3' -ac_eC=' ' -ac_eD='%g' - -if test "${CONFIG_HEADERS+set}" != set; then -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF -fi -for ac_file in .. $CONFIG_HEADERS; do if test "x$ac_file" != x..; then - # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". - case "$ac_file" in - *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'` - ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; - *) ac_file_in="${ac_file}.in" ;; - esac - - echo creating $ac_file - - rm -f conftest.frag conftest.in conftest.out - ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"` - cat $ac_file_inputs > conftest.in - -EOF - -# Transform confdefs.h into a sed script conftest.vals that substitutes -# the proper values into config.h.in to produce config.h. And first: -# Protect against being on the right side of a sed subst in config.status. -# Protect against being in an unquoted here document in config.status. -rm -f conftest.vals -cat > conftest.hdr <<\EOF -s/[\\&%]/\\&/g -s%[\\$`]%\\&%g -s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD}%gp -s%ac_d%ac_u%gp -s%ac_u%ac_e%gp -EOF -sed -n -f conftest.hdr confdefs.h > conftest.vals -rm -f conftest.hdr - -# This sed command replaces #undef with comments. This is necessary, for -# example, in the case of _POSIX_SOURCE, which is predefined and required -# on some systems where configure will not decide to define it. -cat >> conftest.vals <<\EOF -s%^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*%/* & */% -EOF - -# Break up conftest.vals because some shells have a limit on -# the size of here documents, and old seds have small limits too. - -rm -f conftest.tail -while : -do - ac_lines=`grep -c . conftest.vals` - # grep -c gives empty output for an empty file on some AIX systems. - if test -z "$ac_lines" || test "$ac_lines" -eq 0; then break; fi - # Write a limited-size here document to conftest.frag. - echo ' cat > conftest.frag <> $CONFIG_STATUS - sed ${ac_max_here_lines}q conftest.vals >> $CONFIG_STATUS - echo 'CEOF - sed -f conftest.frag conftest.in > conftest.out - rm -f conftest.in - mv conftest.out conftest.in -' >> $CONFIG_STATUS - sed 1,${ac_max_here_lines}d conftest.vals > conftest.tail - rm -f conftest.vals - mv conftest.tail conftest.vals -done -rm -f conftest.vals - -cat >> $CONFIG_STATUS <<\EOF - rm -f conftest.frag conftest.h - echo "/* $ac_file. Generated automatically by configure. */" > conftest.h - cat conftest.in >> conftest.h - rm -f conftest.in - if cmp -s $ac_file conftest.h 2>/dev/null; then - echo "$ac_file is unchanged" - rm -f conftest.h - else - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'` - if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then - # The file is in a subdirectory. - test ! -d "$ac_dir" && mkdir "$ac_dir" - fi - rm -f $ac_file - mv conftest.h $ac_file - fi -fi; done - -EOF -cat >> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF - -exit 0 -EOF -chmod +x $CONFIG_STATUS -rm -fr confdefs* $ac_clean_files -test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1 - - -mv ${OSTYPE}.system.cache.tmp ${OSTYPE}.system.cache - diff --git a/install/gtk/configure.in b/install/gtk/configure.in index 3d83428342..9c1dfefdba 100644 --- a/install/gtk/configure.in +++ b/install/gtk/configure.in @@ -498,50 +498,6 @@ dnl ########################## dnl # checks system services # dnl ########################## - -dnl ##### Threads ##### -USE_THREADS=1 -THREADS_LINK="" -UNIX_THREAD="gtk/threadno.cpp" - -AC_ARG_WITH(threads, -[ --without-threads Force disabling threads ], -[USE_THREADS="$withval"]) - -if test "$USE_THREADS" = "1"; then - dnl For glibc 2 users who have the old libc 5 too - - AC_CHECK_LIB(pthread-0.7, pthread_create, [ - UNIX_THREAD="gtk/threadpsx.cpp" - THREADS_LINK="-lpthread-0.7" - AC_DEFINE(USE_THREADS) - ],[ - AC_CHECK_LIB(pthread, pthread_create, [ - UNIX_THREAD="gtk/threadpsx.cpp" - THREADS_LINK="-lpthread" - AC_DEFINE(USE_THREADS) - ]) - ]) - AC_CHECK_LIB(pthreads, pthread_create, [ - UNIX_THREAD="gtk/threadpsx.cpp" - THREADS_LINK="-lpthreads" - AC_DEFINE(USE_THREADS) - ]) - dnl Two levels - AC_CHECK_FUNC(sproc, [ - AC_CHECK_HEADER(sys/prctl.h, [ - UNIX_THREAD="gtk/threadsgi.cpp" - AC_DEFINE(USE_THREADS) - ]) - ]) -fi - -AC_SUBST(UNIX_THREAD) -AC_SUBST(THREADS_LINK) -dnl defines UNIX_THREAD it contains the source file to use for threads. (GL) -dnl defines THREADS_LINK it contains the thread library to link with. (GL) -dnl defines USE_THREADS if thread support is activated. (GL) - AC_SYS_LONG_FILE_NAMES dnl defines HAVE_LONG_FILENAMES if filenames longer then dnl 14 chars are supported @@ -1192,6 +1148,60 @@ AC_SUBST(GUI_TK_LINK) AC_SUBST(TOOLKIT) AC_SUBST(TOOLKIT_DEF) +dnl ---------------------------------------------------------------- +dnl select dynamic loader (used by iODBC to load drivers) +dnl ---------------------------------------------------------------- + +DL_LIBRARY=-ldl + +AC_SUBST(DL_LIBRARY) + +dnl ---------------------------------------------------------------- +dnl thread support +dnl ---------------------------------------------------------------- + +USE_THREADS=1 +THREADS_LINK="" +UNIX_THREAD="" + +AC_ARG_WITH(threads, +[ --without-threads Force disabling threads ], +[USE_THREADS="$withval"]) + +if test "$USE_THREADS" = "1"; then + UNIX_THREAD="gtk/threadno.cpp" + + dnl For glibc 2 users who have the old libc 5 too + + AC_CHECK_LIB(pthread-0.7, pthread_create, [ + UNIX_THREAD="gtk/threadpsx.cpp" + THREADS_LINK="-lpthread-0.7" + AC_DEFINE(USE_THREADS) + ],[ + AC_CHECK_LIB(pthread, pthread_create, [ + UNIX_THREAD="gtk/threadpsx.cpp" + THREADS_LINK="-lpthread" + AC_DEFINE(USE_THREADS) + ]) + ]) + AC_CHECK_LIB(pthreads, pthread_create, [ + UNIX_THREAD="gtk/threadpsx.cpp" + THREADS_LINK="-lpthreads" + AC_DEFINE(USE_THREADS) + ]) + AC_CHECK_HEADER(sys/prctl.h, [ + UNIX_THREAD="gtk/threadsgi.cpp" + AC_DEFINE(USE_THREADS) + ]) +fi + +AC_SUBST(UNIX_THREAD) +AC_SUBST(THREADS_LINK) + +dnl defines UNIX_THREAD it contains the source file to use for threads. (GL) +dnl defines THREADS_LINK it contains the thread library to link with. (GL) +dnl defines USE_THREADS if thread support is activated. (GL) + dnl ---------------------------------------------------------------- dnl search for opengl dnl ---------------------------------------------------------------- diff --git a/samples/forty/playerdg.cpp b/samples/forty/playerdg.cpp index 93852d3e8f..c85ca72865 100644 --- a/samples/forty/playerdg.cpp +++ b/samples/forty/playerdg.cpp @@ -59,18 +59,13 @@ PlayerSelectionDialog::PlayerSelectionDialog( 0, 0, wxLB_SINGLE ); -#if 1 -// Robert Roebling - int numPlayers = 0; - wxString* players = 0; - m_scoreFile->GetPlayerList(&players, numPlayers); - for (int i = 0; i < numPlayers; i++) + wxArrayString players; + m_scoreFile->GetPlayerList(players); + for (int i = 0; i < players.Count(); i++) { list->Append(players[i]); } - delete players; -#endif m_textField = new wxTextCtrl(this, -1, "", wxDefaultPosition, wxDefaultSize, 0); diff --git a/samples/forty/scoredg.cpp b/samples/forty/scoredg.cpp index bd4d9b93b6..765fa47b5d 100644 --- a/samples/forty/scoredg.cpp +++ b/samples/forty/scoredg.cpp @@ -58,14 +58,13 @@ ScoreCanvas::ScoreCanvas(wxWindow* parent, ScoreFile* scoreFile) : m_font = wxTheFontList->FindOrCreateFont(10, wxSWISS, wxNORMAL, wxNORMAL); #endif - wxString* players = 0; - int length = 0; - scoreFile->GetPlayerList(&players, length); + wxArrayString players; + scoreFile->GetPlayerList( players); ostrstream os; os << "Player\tWins\tGames\tScore\n"; - for (int i = 0; i < length; i++) + for (int i = 0; i < players.Count(); i++) { int wins, games, score; scoreFile->ReadPlayersScore(players[i], wins, games, score); @@ -84,7 +83,6 @@ ScoreCanvas::ScoreCanvas(wxWindow* parent, ScoreFile* scoreFile) : char* str = os.str(); m_text = str; delete str; - delete players; } ScoreCanvas::~ScoreCanvas() diff --git a/samples/forty/scorefil.cpp b/samples/forty/scorefil.cpp index 9025430eab..aa53f764fe 100644 --- a/samples/forty/scorefil.cpp +++ b/samples/forty/scorefil.cpp @@ -41,8 +41,8 @@ ScoreFile::ScoreFile(const char* appName) { +#ifdef 0 wxString filename; -#ifdef __WXGTK__ m_configFilename << "/usr/local/share/" << appName << ".scores"; if (access(m_configFilename, F_OK) == 0) { @@ -67,11 +67,13 @@ ScoreFile::ScoreFile(const char* appName) close(fd); } } -#else - // Windows - m_configFilename = wxFileConfig::GetGlobalFileName(appName); #endif - m_config = new wxFileConfig(m_configFilename); + +#ifdef __UNIX__ + m_config = new wxFileConfig( appName, "" ); // only local +#else + m_config = new wxFileConfig( "",appName ); // only global +#endif } ScoreFile::~ScoreFile() @@ -85,27 +87,23 @@ ScoreFile::~ScoreFile() } -void ScoreFile::GetPlayerList(wxString** list, int& length) +void ScoreFile::GetPlayerList( wxArrayString &list ) { m_config->SetPath("/Players"); - length = m_config->GetNumberOfGroups(); + int length = m_config->GetNumberOfGroups(); - if (length <= 0) - { - *list = 0; - return; - } - - *list = new wxString[length]; + if (length <= 0) return; wxString player; long index, i = 0; if (m_config->GetFirstGroup(player, index)) { - (*list)[i++] = player; + list.Add( player ); + i++; while (m_config->GetNextGroup(player, index)) { - (*list)[i++] = player; + list.Add( player ); + i++; } } } diff --git a/samples/forty/scorefil.h b/samples/forty/scorefil.h index d38b050af6..8e41d63198 100644 --- a/samples/forty/scorefil.h +++ b/samples/forty/scorefil.h @@ -20,7 +20,7 @@ public: ScoreFile(const char* appName); virtual ~ScoreFile(); - void GetPlayerList(wxString** list, int& number); + void GetPlayerList( wxArrayString &list ); wxString GetPreviousPlayer() const; void ReadPlayersScore(const char* player, int& wins, int& games, int &score); diff --git a/src/gtk/dcclient.cpp b/src/gtk/dcclient.cpp index 0352e5eb13..520eaa7036 100644 --- a/src/gtk/dcclient.cpp +++ b/src/gtk/dcclient.cpp @@ -545,7 +545,7 @@ void wxPaintDC::Clear(void) { if (!Ok()) return; - DestroyClippingRegion(); +// DestroyClippingRegion(); if (m_isDrawable) { @@ -556,7 +556,7 @@ void wxPaintDC::Clear(void) int width = 0; int height = 0; GetSize( &width, &height ); - gdk_draw_rectangle( m_window, m_brushGC, TRUE, 0, 0, width, height ); + gdk_draw_rectangle( m_window, m_bgGC, TRUE, 0, 0, width, height ); }; }; diff --git a/src/gtk/menu.cpp b/src/gtk/menu.cpp index 752968ab3f..46a12dee68 100644 --- a/src/gtk/menu.cpp +++ b/src/gtk/menu.cpp @@ -122,19 +122,31 @@ wxMenuItem* wxMenuBar::FindMenuItemById( int id ) const return result; } -bool wxMenuBar::IsChecked( int id ) const +void wxMenuBar::Check( int id, bool check ) +{ + wxMenuItem* item = FindMenuItemById( id ); + if (item) item->Check(check); +}; + +bool wxMenuBar::Checked( int id ) const { wxMenuItem* item = FindMenuItemById( id ); if (item) return item->IsChecked(); return FALSE; -} +}; -bool wxMenuBar::IsEnabled( int id ) const +void wxMenuBar::Enable( int id, bool enable ) +{ + wxMenuItem* item = FindMenuItemById( id ); + if (item) item->Enable(enable); +}; + +bool wxMenuBar::Enabled( int id ) const { wxMenuItem* item = FindMenuItemById( id ); if (item) return item->IsEnabled(); return FALSE; -} +}; //----------------------------------------------------------------------------- // wxMenu diff --git a/src/gtk1/dcclient.cpp b/src/gtk1/dcclient.cpp index 0352e5eb13..520eaa7036 100644 --- a/src/gtk1/dcclient.cpp +++ b/src/gtk1/dcclient.cpp @@ -545,7 +545,7 @@ void wxPaintDC::Clear(void) { if (!Ok()) return; - DestroyClippingRegion(); +// DestroyClippingRegion(); if (m_isDrawable) { @@ -556,7 +556,7 @@ void wxPaintDC::Clear(void) int width = 0; int height = 0; GetSize( &width, &height ); - gdk_draw_rectangle( m_window, m_brushGC, TRUE, 0, 0, width, height ); + gdk_draw_rectangle( m_window, m_bgGC, TRUE, 0, 0, width, height ); }; }; diff --git a/src/gtk1/menu.cpp b/src/gtk1/menu.cpp index 752968ab3f..46a12dee68 100644 --- a/src/gtk1/menu.cpp +++ b/src/gtk1/menu.cpp @@ -122,19 +122,31 @@ wxMenuItem* wxMenuBar::FindMenuItemById( int id ) const return result; } -bool wxMenuBar::IsChecked( int id ) const +void wxMenuBar::Check( int id, bool check ) +{ + wxMenuItem* item = FindMenuItemById( id ); + if (item) item->Check(check); +}; + +bool wxMenuBar::Checked( int id ) const { wxMenuItem* item = FindMenuItemById( id ); if (item) return item->IsChecked(); return FALSE; -} +}; -bool wxMenuBar::IsEnabled( int id ) const +void wxMenuBar::Enable( int id, bool enable ) +{ + wxMenuItem* item = FindMenuItemById( id ); + if (item) item->Enable(enable); +}; + +bool wxMenuBar::Enabled( int id ) const { wxMenuItem* item = FindMenuItemById( id ); if (item) return item->IsEnabled(); return FALSE; -} +}; //----------------------------------------------------------------------------- // wxMenu