Explicitly pass wxART_BUTTON to wxArtProvider to ensure that all the icons are
returned in the same size, otherwise they didn't look well and could result in
an assert too, see #12909.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@67200 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Demonstrate the use of styles such as wxNB_FIXEDWIDTH or wxTBK_HORZ_LAYOUT
specific to particular controls and not only the ones common to all of them.
Closes#13036.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@67192 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
It wasn't immediately obvious that this dialog could be used for multiline
text entry too so mention it explicitly in the documentation.
Also show this in action in the dialogs sample.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@67179 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The rubber banding selection message box was shown even after a simple click,
i.e. when nothing was actually selected which was quite annoying, so don't do
this.
Also remove unnecessary casts and use wxLogMessage() instead of
wxString::Printf() + wxMessageBox().
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@67160 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Instead of passing them by value, use const reference. This change
is safe to do, because these methods' signatures were different in 2.8
anyhow.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@67099 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Use recently added wxMarkupText to implement support for markup in wxMSW
wxButton.
Update the button page of the widgets sample to show markup support.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@67065 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Make it possible to disable all the new markup-related code by setting
wxUSE_MARKUP to 0 in setup.h or using configure --disable-markup option.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@67062 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This is an incompatible change which removes the wxStaticText-specific
wxST_MARKUP style and adds wxControl::SetLabelMarkup() replacing it.
It doesn't actually change anything yet but it simplifies wxStaticText code a
lot by getting rid of many markup-related functions in it which had to behave
differently depending on whether wxST_MARKUP was used or not and also paves
way for adding markup support for the other controls in the future.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@67055 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This fixes an assert which could happen when showing the rich text editor.
Also show the colour in a more readable form if possible.
Closes#12950.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66960 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
PNG images are used by the main wxWidgets library itself now and so linking
with the monolithic wx library introduces dependencies on PNG as well, even
for the console applications. Link them with linpng to avoid linker errors.
Closes#12889.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66848 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This parameter was never needed nor properly documented. Simply remove it from
SetTickFreq() and keep the overload still taking it for backwards
compatibility only.
Closes#12907.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66844 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Update configure and bakefile.m4 for the new version too.
Also add the missing makefiles and projects for the XTI sample.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66836 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Instead of constructs such as if "( s.length() )" and "if (s.length() > 0)" use "if ( !s.empty() )" instead. Similarly for "if (s.length() == 0)" or "if ( s.IsNull() )", use "if ( s.empty() )".
No code changes intended except for a few instances where a construct like "if ( s.length() && wxFileExists(s) )" was changed to not check the length of the string and let wxFileExists handle such cases.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66728 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Add validators for integer and floating point numbers.
Add an example of their use to the validate sample as well as a new unit test
and documentation for them.
Use the new classes instead of wxTextValidator in wxGrid code.
Closes#12166.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66714 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
wxRTC functions now operate on the currently focused object, which by default is the whole buffer.
Up to three property commands are now shown on the context menu, depending on
available objects in the current hierarchy.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66680 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
VC8+ give tons of deprecation warnings for the standard functions which are
usually suppressed by wx headers but they need to be included first for the
suppression to be effective. In the MFC sample they were not resulting in many
useless warnings.
Fix this by pre-defining _CRT_SECURE_NO_WARNINGS to suppress them in the
sample itself.
Also suppress a warning about WINVER being undefined.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66668 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
MFC needs the entry point to be wWinMainCRTStartup() in Unicode builds but the
bakefile-generated projects use the default WinMain() so the sample didn't
link in Unicode.
Fix this by providing WinMain() which simply forwards to wWinMainCRTStartup()
as this seems to work for all MSVC/CRT versions.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66667 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This eliminates a linking dependency that would drag in the printing
code for any program that used wxColourDialog or wxFontDialog (which
is currently all of them, due to more link dependencies...)
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66615 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Add wxRibbonBar::{Show,Hide}Panels() and ArePanelsShown() accessor.
Also add a toggle button to the sample to test the new functionality
(unfortunately it couldn't be done by a control in the ribbon itself as there
would be no way to show the panels back then).
Closes#12707.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66612 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
There are no real changes, just make it easier to understand that the sample
code overrides the base class virtual methods by reusing the virtual keyword
in the derived class.
See #12819.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66548 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This is especially useful under Mac where wxSound can play files other than
.wav too (e.g. .aiff files which can be found under /System/Library/Sounds).
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66536 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
It is definitely not necessary to call SetTopWindow() when there is only a
single top level window and it is arguable whether it's useful to do it even
when there are many of them so don't encourage its use in the documentation
and also remove all its occurrences from the samples.
Closes#12816.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66528 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
These icons will be used in the upcoming new implementation of the print
preview frame and as they are also natively supported by GTK+ it makes sense
to have support for them in wx itself.
Notice that the existing bookmark add/remove icons are already mapped to the
icons which look like plus and minus signs respectively in wxGTK but we need
plus/minus in print preview in the other ports too so add these icons under
explicit names.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66504 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
These strings don't need to be wide and, as elsewhere, prefer the
compatibility with 2.8 ANSI build to compatibility with Unicode build.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66503 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The button icons have a different size from all the other clients in wxGTK so
it may be interesting to see them in the sample, add wxART_BUTTON to the list
of art clients that can be chosen in it.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66501 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This not only removes some unnecessary code from the sample but also fixes a
problem due to the use of a 0 id under wxOSX (which is unsupported there).
Closes#12788.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66428 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Add new wxDataViewModel::IsEnabled() and wxDataViewListStore::IsEnabledByRow()
methods and implement support for actually disabling the items in wxOSX/Cocoa
native implementation of wxDataViewCtrl and limited support for it in the
generic version.
We need to implement this in wxGTK using GtkCellRenderer "sensitive" propriety
later.
Closes#12686.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66403 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
When getting an instance of an OLE automation object, it is often useful to
connect to the existing instance if any or start a new one otherwise. Make
GetInstance() behave like this by default while still allowing to use the
wxAutomationInstance_UseExistingOnly flag to reestablish the old behaviour.
Also improve the error reporting in wxAutomationObject.
See #12489.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66262 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Add simple wxVersionInfo class holding the version information.
Also add GetLibraryVersionInfo() static method to wx{JPEG,PNG,TIFF}Handler,
wxStyledTextCtrl and wxXmlDocument classes and wxGetZlibVersionInfo() and
wxGetLibraryVersionInfo() global functions using it.
Closes#12690.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66259 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Some tests in the "Menu" menu of the menu sample worked with the "Test" menu
while others used the last one ("Help" initially but possibly something else
if the test commands from "Menubar" menu were used).
Harmonize all menu commands to use the "Test" menu now.
See #12668.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66138 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Use Connect() for compatibility (notably with VC6 which doesn't support
Bind()). Also connect the event handlers on loading the dialog instead of
waiting until the relevant page is selected, this makes the code slightly
simpler as we don't need to remember whether we connected them or not any
longer.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66062 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Allow to declare ranges of consecutive IDs in XRC by using the "id[n]" syntax.
Show this functionality in the xrc sample and test it in the new unit test.
Also show and test the "object reference" XRC functionality.
Closes#11431.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66059 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The mouse event handler for the frame was never executed because the frame is
entirely covered by other windows in this sample. Not sure what was meant here
but this handler is useless so just remove it.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66009 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The sample contained a lot of unnecessary checks for m_log, remove them to
make the code shorter and simpler to understand.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@66008 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Replace wxLogDebug() with wxLogTrace() as was probably intended. This fixes
the assert which happened when running the sample because of the wrong number
of parameters passed to wxLogDebug().
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65908 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This makes it more convenient to run the sample repeatedly as the directory to
watch can be specified only once instead of having to choose it interactively
after the sample startup every time.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65907 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The generic wxTreeCtrl version only sends this event when the mouse is right
clicked on a valid item so do the same in wxMSW version too for consistency.
This is also consistent with wxEVT_COMMAND_TREE_ITEM_RIGHT_CLICK event and
avoids strange problems with unexpected wxEVT_COMMAND_TREE_ITEM_MENU events
generated on right double click.
Finally, replace the checks for item validity in the event handler in the
sample with asserts which should loudly complain if it happens to be invalid.
Closes#11226.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65903 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Add an optional wxExecuteEnv parameter to wxExecute() which allows to specify
the initial working directory and custom environment for the child process.
Closes#12163.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65896 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
wxNotebook was unusable with so many pages under all platforms and completely
unusable under Mac. Replace it with wxChoicebook which allows to select any
page quickly instead of having to do it sequentially (or not being able to do
it at all under Mac).
Another possibility could be to use wxTreebook and organize the pages in
categories, similarly to how it is done in the widgets sample.
Closes#3699.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65891 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Several new pages were added in random positions, rearrange them to be in
alphabetical order.
Also remove wxToolBar from "The Rest" page as it is shown in one of the other
pages now.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65890 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
appicon.xpm was removed so use another icon in the controls demo in the sample
instead, it doesn't matter which one we use anyhow.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65886 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
There are already way too many pages in the "Controls Example" in the sample,
combine wxBitmapButton and wxButton ones to save some space and make it more
usable.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65855 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
No real changes, just remove a check for pointer passed to wxDELETE() bot
being NULL as wxDELETE() already checks for this anyhow.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65781 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
so that objects can stream themselves; added a wxXmlDocument-based method
of writing XML, though this turned out to be much slower than writing directly
so the direct approach is retained and is the default (can be changed with wxRICHTEXT_USE_XMLDOCUMENT_OUTPUT).
Loading and saving new attributes implemented. Added custom properties to objects.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65779 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
There are no real changes in this commit but it removes all trailing white
space from our source files. This avoids problems when applying patches and
making diffs and it would be nice to prevent it from reappearing.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65680 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Added floating images and image property dialog to wxRichTextCtrl, by Mingquan
Yang as part of GSOC 2010. Also changed image block creation to use a memory
stream instead of creating a temporary file.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65676 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Only show the mnemonics if they need to be shown, i.e. use the same logic as
the standard controls use, to avoid showing mnemonics in wxStaticBox with
custom label colour even when other wxStaticBoxes don't show it.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65580 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The default handling for Alt key press in the standard control is to redraw
the label to account for showing of the keyboard queues (i.e. if the mnemonics
were initially hidden, they are shown when Alt is pressed) but it doesn't
redraw it in the correct colour resulting in any custom label colour being
lost whenever Alt is pressed anywhere in the window containing the box.
Fix this by forcing the box refresh which will result in repainting it using
our code which does use the correct colour.
Also update the static page of the widgets sample to allow changing the
colours of all static controls on this page, including the wxStaticBox, and
not just the main wxStaticText.
Closes#12497.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65579 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Add missing svn:eol-style property to all .cpp files. Also set svn:keywords for .cpp files which don't have that property yet to Id, including src/osx/core/glgrab.cpp for consistency (it doesn't make use of the property).
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65561 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The linking optimization this macro protects against can't happen when using
DLL and so using it is at best useless and actually harmful (because it
doesn't contain the correct DLL export declarations) in the latter case.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65558 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Add missing elements of wxKeyCode enum ("Windows" and "Command" keys) to the
GetVirtualKeyCodeName() function in the sample.
Also output "unknown" and not blank for WXK_NONE.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65524 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Only set Unicode key code if the event corresponds to a character key and set
it to (newly added) WXK_NONE for the other ones to avoid nonsensical values in
it for e.g. "Home" key presses.
Also set non-Unicode key to WXK_NONE for the characters that can't be
represented in the current locale. This is consistent with wxGTK and avoids
conflicts between special key values and Unicode keys.
Clearly document the above behaviour.
Notice that implementing the correct behaviour in wxMSW involved untangling
previously interwoven WM_KEY{DOWN,UP} and WM_CHAR messages handlers. Clearly
separate them now as they get different input (key codes for the former,
characters for the latter) and especially don't try to convert from both kinds
of input using a single wxCharCodeMSWToWX() function. As this function doesn't
need to distinguish between keys and characters any more it can simply return
the converted value in all cases instead of returning 0 sometimes to indicate
a character value instead of a key. Simplify the code using this function
accordingly.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65522 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Add a command line option to the dialogs sample to allow testing of different
wxProgressDialog styles more easily. This also tests for showing them before
the main event loop is started (see r65499).
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65502 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This prevented the sample from building when using MinGW-64 and also probably
prevented it from working correctly on other 64-bit systems.
Closes#12453.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65495 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Remember the PID entered in the dialog and also remember the last used signal
number. This makes these dialogs slightly less painful to use when testing
even though ideally we'd have a single dialog for choosing both values instead
of two consecutive modal dialogs.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65492 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Force the linker to include all the backends in the sample executable instead
of discarding them because they are not used directly to allow testing all of
them in the sample.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65485 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Add a lot of tests for many wx GUI classes.
Add tests using the new wxUIActionSimulator class but disable them under OS X
as too many of them currently fail there.
Refactor the test suite to make organizing the existing tests and adding the
new ones easier.
Improve documentation using the information gathered while testing the
classes. Also update the documentation of the testing system itself.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65386 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Correct a lot of problems with the initial implementation, notably make the
API consistent across all platforms, e.g. all keyboard-related methods now
take just a wxKeyCode.
Add some useful higher-level helpers such as Text() and MouseDragDrop().
Improve documentation.
wxUIActionSimulator now works under MSW, GTK and OS X and is enabled by
default.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65385 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
If available, the task dialog is now used for the wxProgressDialog under
Windows. This provides a much more native looking dialog which doesn't look
out of place under modern Windows versions, unlike the generic implementation.
The internals of the code had to be significantly changed as the task dialog
can only be shown modally so, to emulate wxProgressDialog modeless nature, a
separate thread is used for the progress dialog management.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65352 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This is a generalization of wxMessageDialog based on the native task dialog
under recent (Vista and later) Windows versions and implemented generically
for the other ports for now.
It provides the possibility to use additional controls in the message boxes
(checkbox useful for the "Don't ask me again" kind of dialogs and collapsible
detailed explanations field) and better look and feel under Windows.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65349 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
A command link button wraps a native MSW control under recent Windows versions
and is implemented generically as a simple bitmap button elsewhere.
In the future, GTK implementation should allow using a different font for the
button label and its note.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65327 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Follow our own advice about never creating controls directly on the frame and
using an intermediate wxPanel in our own sample. This is better style and
makes it look better under Windows.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65239 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
With MSWSetTransparentBackground() hack only the panel which was the immediate
child of wxNotebook (i.e. its page) inherited the notebook background but not
its children. This resulted in jarring background discontinuities when nested
panels were used.
Fix this by inheriting notebook background in all child panels by testing for
the return value of the parents MSWHasInheritableBackground() method in
wxPanel::HasTransparentBackground() recursively.
Closes#12317.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65238 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The bitmap must be deselected from wxMemoryDC before being used in any other
way but the sample didn't do this. Fix this by simply destroying the DC as
soon as we don't need it, this makes bitmap available for other use as well.
Closes#12310.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65232 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Current item is the same as the selected item in single selection mode but in
multiple selection mode there was no way to neither get this item nor change
it before so add the new functions to allow doing this now.
The new methods are implemented for the generic, GTK and OS X/Cocoa versions
but only stubs are provided for OS X/Carbon.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65228 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
In English, this work (K. 525) is always referred to with its indefinite
article included and its appearance without it is jarring.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65113 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This code is broken as it doesn't always show the selection correctly and
doesn't handle rows-or-columns selection mode at all. Until we can fix it
properly it's better to not have it at all so that at least people avoid
copying the wrong code into their own programs.
Closes#12195.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65075 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Allow wxAUI to change the toolbar orientation depending on where is it docked.
It is also now possible to specify wxAUI_TB_VERTICAL or HORIZONTAL to force
the toolbar to be always oriented in the given sense and to prevent it from
being docked at the sides incompatible with it.
Closes#11712.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65061 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The result of calling NewControlId() must be assigned to wxWindowIDRef to be
accounted for correctly, otherwise the id was marked as free while a reference
to it still existed resulting in asserts in id management code when we
attempted to reuse it.
Closes#11604.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65059 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Native wxMSW wxDC::DrawText() implementation doesn't support multi-line
strings so use the generic wxDC::DrawLabel() code instead. Drawing multi-line
strings now works at least in wxGTK and wxMSW, to be tested for the other
platforms.
Closes#12239.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@65058 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The last commit used incorrect property name, remove the erroneous property
and set the correct svn:eol-style one.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64996 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Forward wxEVT_CHAR events from wxDataViewMainWindow to the parent window so
that they could be processed at wxDataViewCtrl level.
Call DisableKeyboardScrolling() to ensure that cursor movement keys are not
always eaten by the parent window but can be used for the navigation in the
control if they're not processed by user.
Add a test keyboard handler to the dataview sample to check that handling keys
in wxDataViewCtrl does work.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64957 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
ID_DELETE_MUSIC button deleted selected items so use ID_DELETE_SEL and
OnDeleteSelected() handler for it instead.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64956 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Use "wxWindows licence" and not "wxWidgets licence" (the latter doesn't
exist) and consistently spell "licence" using British spelling.
See #12165.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64940 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Also update the tech note listing the places that need to be changed when a
new version is released and the script which updates them automatically.
Finally update a couple of copyright years.
Closes#12185.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64913 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
In practice names are not often used so typically whenever you want to make a
window settings persistent you also need to set its name and the it's
convenient to let a single function do both tasks, so add an overload taking
the name string (this is a separate function instead of optional parameter to
avoid compilation errors if this is ever used with non-wxWindow-derived
objects which don't have SetName() method).
Also expand the documentation slightly and add @since tags.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64887 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
It's more convenient to have the string to search for directly in the event
object than to retrieve it from wxSearchCtrl itself as it had to be done
before.
Closes#4665.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64886 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This sample already included sample.xpm even before the recent changes
replacing mondrian.xpm (which it also included) inclusion with sample.xpm so
now it included it twice.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64726 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The variables are always initialized but for some reason (at least the Apple
version of) g++ gives warnings for them.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64665 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Use wxDELETE[A]() functions which automatically NULL out their arguments after
deleting them instead of doing it manually.
Closes#9685.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64656 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The old code which simply used PBM_SETPOS after setting PBS_MARQUEE style
often worked but sometimes apparently didn't, so switch to the officially
sanctioned PBM_SETMARQUEE to implement this.
Also make wxGauge::SetDeterminateMode() and SetIndeterminateMode() methods
private as they are not part of the public class API.
Closes#11357.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64648 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Standardize on using sample.rc and sample icon in all the samples, it was
confusing that some of them used it and other didn't, without any apparent
logic.
Remove the now unnecessary icon files, including the dialogs sample icon which
seemed to be corrupted (this closes#11146).
Also replace multiple OS/2 resource files with a single one in the sample
directory. The OS/2 projects/makefiles would need to be updated to use them.
Remove dialogs sample icon.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64645 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Under MSW the timer appeared to be flooding the message queue with timer
events faster than we could process them (which seems incredible for the timer
interval of 1 second but still seems to happen), so the idle events were never
generated and the sample didn't work at all.
Now stop the timer once we get a last notification from it to let the program
become idle and run the test function scheduled from the timer handler.
See #11528.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64566 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Fix FileNameTestCase::TestGetHumanReadable to check the result against expected strings using the correct decimal point for the locale used on the test machine.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64512 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
- wxLog already has a better cppunit test class
- wxLocale test in the console sample didn't work on Windows and wasn't very useful
move some tests from the console sample to CppUnit tests:
- wxPathList => PathListTestCase
- wxModule => ModuleTestCase
remove some tests about removed functions of wxMimeTypesManager
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64511 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Remove wxRegKey tests from console sample: on newer Windows they only work when run with admin privileges; also we can expect wx[Reg]ConfigTestCase to already check a good number of wxRegKey features.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64466 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
We must offset the coordinate system before scaling it, otherwise incorrect
offset is used.
Add a test for drawing translated/scaled bitmaps to the drawing sample.
See #11097.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64463 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Hardcoding position to 50,50 is inconvenient, let the window manager position
the window as configured by user. Also, the vertical size of the sample was
too small to see the contents of most pages, increase it.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64462 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Parse "style" attributes of the HTML tags and honour those of them that can be
mapped to the HTML 3 attributes.
Also add a handler for <span> tag.
Closes#10631.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64443 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Use a sizer for the frame to make sure its initial and minimal size correspond
to the best size of the panel inside it. Also add a Layout() call on the panel
which was somehow not done initially. And finally don't centre the frame, this
is unnecessary.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64380 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Check for the transparency of the window background in MSWGetBgBrush() itself
and let MSWGetBgBrushForChild() just return the brush to be used.
This required adding a MSW-specific hack to wxPanel to allow inheriting
background of wxNotebook by its children which is slightly ugly but is exactly
what we need to do in this case and makes the rest of the code much simpler.
Also add a possibility to set the background of the page containing the
control being tested to the widgets sample to test for background inheritance.
This shows problems with wxSlider and wxRadioBox backgrounds but they're not
new with this patch.
Closes#12057.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64372 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Test using icons and bitmaps in it. Also show the native/default
implementation of this method and not only our overridden version.
See #12047.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64307 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Add a function which can be overridden to return an arbitrary number of
widgets instead of having just GetWidget() and GetWidget2(): spin control page
already uses 3 widgets (and defines GetWidget3() which is never called) and we
could have even more in the future. Just use a generic solution which will
always work.
The practical consequence of this is that the "Enable/Disable" menu item now
also enables and disables the wxSpinCtrlDouble in the spin page, see #12045.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64301 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Remove unnecessary, never used methods.
Don't use pointers when objects or references can be used more safely.
Don't name classes which are not part of wx with "wx" prefix to avoid
confusing people.
Don't define empty unnecessary event tables.
Prefer wxScrolledWindow::SetVirtualSize() to SetScrollbars().
Stop using "protected" when "private" should be used.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64300 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Painting on both wxPaintDC and wxClientDC simultaneously doesn't work well,
e.g. under Windows the client DC can be actually erased after we finished
painting the window contents, overwriting it.
Simply use wxDC::Clear() instead of wxWindow::ClearBackground() to avoid this
and document the danger of using ClearBackground() from EVT_PAINT handler.
Closes#10700.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64277 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Add ProcessWindowEventLocally() which wraps ProcessEventLocally() in the same
way as ProcessWindowEvent() wraps ProcessEvent(). I.e. it allows to process
the event in this window only, without propagating it upwards, but taking into
account any event handlers associated with it.
Use the new method in wxMDIParentFrame code in wxMSW to ensure that event
handlers pushed on MDI children frames are taken into account. Add a test for
this to the MDI sample.
Closes#11225.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@64262 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This doesn't affect Unicode builds, only the legacy ANSI one.
PO files are now always converted to the appropriate charset according
to current locale. This was the default behavior for long time; not
doing the conversion was always a fragile hack that didn't work well.
Removing this flag simplifies wxLocale code.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@63993 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
wxWidgets requires wchar_t for some time now; wx/chartype.h has a check
to fail complation without it. Simplify code by removing now-dead code
for the !wxUSE_WCHAR_T case.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@63991 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Fix a warning about unused parameters and another about signed/unsigned
comparison during samples and tests compilation.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@63873 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Allow specifying a set of gradient stops instead of just the beginning and
ending colours. Add the new wxGraphicsGradientStop(s) classes and new
wxGraphicsContext::Create{Linear,Radial}GradientBrush() overloads. Also change
the same methods of wxGraphicsRenderer to take wxGraphicsGradientStops instead
of a pair of colours.
Implement the new API for MSW and Cairo. OS X still uses just the two colours
for now.
Closes#11897.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@63857 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
wxDocument::Revert() method existed but didn't do anything, provide a
default implementation for it. Also document it and show it in the sample.
Closes#11849.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@63748 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
There is no way to exclude the sample from the build under Windows so make it
compile and link even if wxUSE_UIACTIONSIMULATOR==0 but just give an error
message on startup in this case instead of working as expected.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@63741 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Setting wxChoice height to its default value didn't change the height even if
the current height was different from the default. This resulted in problems
when a wxChoice was used inside a wxAuiToolBar because AUI temporarily reduces
the toolbar size to (1, 1) when docking it (thus ensuring that the height of
wxChoice is changed too) and generally didn't make sense.
Fix this by resetting the height to the default value if the value passed to
wxChoice::SetSize() is what it considers to be its default height.
Add a unit test for this bug and also add a wxChoice to AUI sample to allow
testing for wxChoice behaviour inside a wxAuiToolBar being [un]docked.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@63708 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The sample allowed to test the behaviour with all wxICON_XXX including
wxICON_NONE but not without any icon styles at all. Do allow it now.
Also use symbolic names for the radiobox indices for clarity.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@63681 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This should fix VC6 build broken by addition of this sample as VC6 doesn't
support Bind(). Luckily, there is no need to use it here anyhow.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@63680 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The selection was 0 in a notebook without any pages which was wrong as it must
always be less than the page count.
Fix this in wxAuiNotebook itself and add an assert checking for this invariant
to the sample.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@63642 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
We need to update the lfags first before deciding whether we should create or
destroy the header.
Also add a test for toggling the header to the listctrl sample.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@63637 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The code used bitwise XOR which was rather difficult to read and also resulted
in g++ 4 warnings about suggested parentheses.
Fix both issues by using bitwise AND and OR in two separate statements instead.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@63633 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Ctrl-5 was used both for the treebook in the "Type" menu and default
orientation choice in the "Orientation" menu.
Use Alt-[0..4] for the "Orientation" menu entries.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@63631 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Add a checkbox for toggling wxTE_PROCESS_ENTER to the text page and use this
style by default. This makes it easier to check that this style works as
intended, including that it generates the correct events.
See #11691.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@63379 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This was apparently unintentionally added in r15050 to all files of the
widgets sample and somehow survived in this one only until now.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@63241 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Notice that currently only stretchable spacers are supported via
separator-like "space" XRC element. If we ever add support for fixed spacers
in the toolbar we should do it via its fixed sub-element, e.g. they would be
specified with <fixed>1</fixed> in XRC file.
Also use spacers instead of separator in the XRC sample and ensure that the
toolbars in it are resized.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@63172 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Show the result of wxDC::GetChar{Width,Height}() and the font size in pixels
in addition to the font size in points.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@63168 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The code in wxFrameBase::SetToolBar() didn't work correctly when toolbar was
unset using SetToolBar(NULL) because the frame toolbar pointer was reset
before layout was done resulting in the frame not recognizing its (still
existing) toolbar child as one of its bars and so nothing was done at all when
the frame had a single child, as in the toolbar sample.
Correct this by carefully ensuring that the toolbar pointer is still set at
the moment of the layout but hide the toolbar to ensure that no place is
allocated for it.
Also mention that it is not necessary to call SetToolBar(NULL) at all if the
toolbar is being deleted anyhow in the sample as toolbar does this itself in
its destructor.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@63007 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Handling erase background events for toolbars never worked for the ports other
than wxMSW and now it doesn't work for MSW neither as we need to skip erasing
the background in WM_ERASEBKGND handler to avoid flicker which would result
from erasing the background twice, from there and from WM_PAINT handler which
must do it. So don't even try to test if it works, it's unlikely to be very
useful anyhow.
This reverts the change to this file in r62805.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62972 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Test using 'Ctrl-A', just 'A' and 'Esc' as accelerators as all of them except
the first one were reported not to work in some cases.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62914 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Stretchable spaces consume all extra toolbar space not allocated to the fixed
size items. They can in particular be used to right-align (some) toolbar tools.
Add and document the new API, change the sample to show it and implement it
for MSW, GTK and OS X/Cocoa.
Also refactor MSW background erasing/repainting code to avoid duplicated calls
to DrawThemeBackground(), call it from a new helper MSWEraseRect() function.
Note that we may want to add support for "invisible" separators, IOW
non-stretchable spaces. This could be easily done for MSW after the changes in
this commit and is supported natively by GTK+ and Cocoa so implementing this
would be trivial if there is any interest.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62850 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Don't call wxTrap() when an assert in a non-main thread fails. As asserts are
now always enabled by default, this is not a good idea. Instead just show the
full details about the assert failure using wxMessageOutputDebug under the
platforms without MT-safe message box function (i.e. everything but MSW
currently).
Add a possibility to test an assert happening in non-main thread to the except
sample.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62842 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
These tests are unnecessary now because asserts are almost always enabled. We
could test for wxDEBUG_LEVEL but the code still compiles even if it's defined
as 0 so there doesn't seem to be any need for it.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62841 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
As this sample uses GUI Windows functions, it requires this library.
Not sure why it isn't added by bakefile automatically for app-type==gui
target.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62837 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Remove the test which prevented the generation of erase background events from
wxMSW::wxWindow::HandleEraseBkgnd(). Although it is true that native controls
mostly erase background on their own, there are exceptions: we must erase the
background of wxToolBar ourselves, for example. More importantly, there is no
reason to prevent the user code from defining wxEVT_ERASE_BACKGROUND handlers
for the native controls as this works just fine under MSW (although it doesn't
under GTK nor probably other ports...). So also add a test erase background
handler to the toolbar sample to verify that this does work.
Closes#11514.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62805 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The best default behaviour seems to be to use white background for multiline
text controls even when they're read-only, as in previous wx versions.
Also see #11521 which could be implemented to make this configurable.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62804 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This is necessary to properly define MY_DLL_DECL as either WXIMPORT or
WXEXPORT depending on whether my_dll.h is included from DLL itself or from
outside it. Without this, MSVC generated warnings about inconsistent dll
linkage.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62802 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Rename old private wxGetModuleHandle() function to wxDynamicLibrary::
MSWGetModuleHandle() to allow its use in the dll sample.
This fixes the sample compilation with VC6 which lacks GetModuleHandleEx()-
related declarations.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62801 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Using __stdcall before the return type results in a warning with VC6 and an
error with VC9, place it after the return type.
Also use wxSTDCALL instead of just __stdcall for potentially better
compatibility with other compilers.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62800 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Don't fail loudly if the image file is not found (which can happen under Unix
if the image sample wasn't built yet or if we're not running the sample from
its own directory) but just don't create the bitmap.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62770 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
wxGridCellAttr didn't provide any way to query its alignment attributes
without falling back to the (always defined) default alignment so the code in
wxGridCellNumberRenderer and similar classes simply always used right
alignment,
Add a new wxGridCellAttr::GetNonDefaultAlignment() function which allows to
retrieve the alignment defined in the attribute and use it to use right
alignment by default but allow overriding it.
Add a test to the sample showing a non right-aligned numeric cell.
Incidentally fix a long-standing bug in wxGridCell{DateTime,Enum}Renderers
which used wxRIGHT instead of wxALIGN_RIGHT and so were not aligned properly
even by default.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62728 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This makes it have nicer colour (white instead of grey by default) under MSW
and wxTE_RICH was already in the code, just commented out -- it seems it's
better to enable it (as it also allows more text to be shown in the control
under old Windows versions) than to remove it.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62719 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Wrong width was returned for the icon or label rectangle when querying the
first column. Fix this and add a test to the sample allowing to check this.
GetSubItemRect() still returns wrong results for second and subsequent
columns, see #11355.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62706 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Support wxSL_{LEFT,TOP,RIGHT,BOTTOM} in wxGTL version of wxSlider.
Make the display of the orientations in the slider page of the widgets sample
more clear.
Also document wxSL_<DIR> meaning better.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62655 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
wxGTK doesn't currently take wxSL_{LEFT,RIGHT,TOP,BOTTOM} styles into account
but at least make it change the slider orientation correctly depending on them.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62618 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Also use this flag with the tree control in the sample to test it and also
because it doesn't make much sense to have a single column without title
anyhow.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62601 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Add a column using custom renderer to the example using a list model with
attributes to test attributes support -- currently they are ignored, but this
will be fixed soon.
Also make the custom renderer display somewhat more clear as previously it
didn't depend at all on its value.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62588 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Using Col_EditableText, Col_IconText and Col_TextWithAttr instead of 0, 1 and
2 makes the sample code a bit easier to read.
Also use switch on the column value instead of nested ifs everywhere to give
compiler a chance to warn us if we forget to update some function when a new
column is added.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62587 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
As with other ANSI/Unicode unification changes, we choose to preserve
compatibility with the existing code using wxLongLongFmtSpec in ANSI build
and require people using it in Unicode build to change their code.
Closes#11372.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62562 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This is an incompatible change but having to use a non-const model pointer to
call a clearly logically const version was simply too ugly so change it while
we still can.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62500 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
There doesn't seem to be any reason to not use them and having different
appearance under OS X and elsewhere is just confusing and looks like a bug.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62491 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Unfortunately 0.2.7 release contained a bug in msvc backend which resulted in
warnings generated for each file compiled. Apply the fix from bakefile svn to
fix this (and test if no other problems are found).
Also update all makefile.unx after changes of r62477.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62488 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Currently wxEventLoopSource can't be created directly and can only be used to
monitor file descriptors so reduce the API to just wxEventLoop::AddSourceForFD()
and remove AddSource(), RemoveSource() and RemoveAllSources() which couldn't
be implemented for all ports. This makes the code much simpler without any
loss of functionality.
Make wxEventLoopSource responsible for removing itself from the event loop
when it is deleted. This allows to remove IsOk() and Invalidate() methods
making the code simpler and gets rid of various sets/maps which were used
before.
This also allows to support event loop sources in Carbon as well: wxOSX/Carbon
now compiles and works with wxUSE_FSWATCHER==1.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62475 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Merges everything from the branch with only some minor changes, mostly renamed
wxUSE_FSWATCHER_{INOTIFY,KQUEUE} to wxHAS_{INOTIFY,KQUEUE}.
Add wxFileSystemWatcher and related classes.
Also introduces wxEventLoopSource.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62474 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Remove VC9-only solution files from a couple of tests/utils/demos (there is
no reason at all to have only VC9 solutions: either we have all of [789] or
none of them) and also remove all solutions files for the ribbon sample which
were probably added mistakenly in the first place (as no other sample has
them).
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62469 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Comment and document the (non obvious) requirement for the PNG image handler
to be enabled when using this function under OS X. In fact, document the
entire function itself which was forgotten previously.
Do enable PNG image handler when using DrawTitleBarBitmap() in the sample.
Closes#11345.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62455 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Implemented ellipsization in the generic, GTK and both OS X Carbon and Cocoa
versions but it currently doesn't work well in GTK as it changes the item
alignment unconditionally, this will need to be fixed later.
The behaviour for the columns is currently inconsistent between ports too:
under MSW they (natively) use wxELLIPSIZE_END, under GTK -- wxELLIPSIZE_NONE
and under OS X the same ellipsization mode as the column contents, i.e.
wxELLIPSIZE_MIDDLE by default.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62433 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This has a possible advantage of a more native look and feel (although it's
hard to tell the difference between drawing the icon ourselves and how the
default GTK+ renderer does it to be honest) and a very real advantage of
allowing to edit in place cells with icons. It also reduces code duplication
in GTK implementation.
Modify the sample to make the icon-text column in the list model editable to
show that it works. This required storing the values of the second column as
well, so do it in its own array and to avoid calling it "m_array2", rename the
existing m_array to m_textColValues (which accounts for most of the diff in
the sample) and call the new one m_iconColValues.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62423 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
SetBellOnError() erroneously inversed the value of its parameter. Fixing it to
behave correctly could silently break the existing code which might work
around this bug already because it always behaved like this (ever since it was
added 10.5 years ago). So instead simply deprecate this function and add a new
SuppressBellOnError() one which behaves as expected.
Closes#11318.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62414 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The attribute used for the last item was reused for the next item in the same
column unless it was overridden in the attribute of this item, fix this by
remembering the original attribute and using it if no attributes are
explicitly specified.
Also change the sample to show the items without attributes in a column with
attributes and make the label correspond to the attribute of the item.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62390 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Make the colours of the items in the "attributes" column blue/green/red in
order instead of making all odd items blue and all even and divisible by 3
ones green while making the rest of them red -- it was a bit difficult to
figure out how it worked before.
Also correct wxDataViewItemAttr::SetItalic() check: comparing the remainder of
the division by 2 with 5 didn't risk to work.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62385 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
There is no reason to have a separate class for rendering the text honouring
the attributes defined for it, wxDataViewTextRenderer itself already does this
perfectly well.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62383 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Finding the closest info bar to copy the background colour from only worked
for very simple layouts and failed for more complicated ones with nested
sizers so don't try to change the colour automatically, it's easy enough to do
it manually as shown in the updated dialogs sample.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62301 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This is currently only implemented for wxMSW as there is no advantage to use a
generic implementation compared to using wxArtProvider directly under the
other ports. But for MSW this allows to have perfectly natively looking
titlebar-like buttons.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62295 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The implementation of DrawHeaderButton() in MyRenderer should restore the
text foreground colour and brush to avoid messing up drawing done after it.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62289 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Also add an example of handling info bar buttons events to the sample and
mention that this must be done using Connect() or by deriving from wxInfoBar
in the documentation.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62279 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Also change the GTK implementation to use a separate wxInfoBarGTKImpl to store
its data, this object won't be even allocated if a generic implementation is
used under GTK.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62277 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Calling Show/HideWithEffect() with this effect is the same as calling just the normal Show/Hide().
This is convenient as it allows to use the same API, whether with effects or without them.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62267 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Simplify the code by not transferring font and colours between canvas and
wxTheApp but use canvas font and colours directly instead.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62265 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
wxDataViewMainWindow::OnPaint() always used the white brush to erase the
control background which was wrong, change it to use the background colour of
the control.
Also add tests for setting wxDataViewCtrl foreground and background colours to
the dataview sample.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62153 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
As this class has only inline methods it doesn't need to be exported from the
DLL and actually exporting it results in linking problems when using
wxScrolled<wxWindow> (which, unlike wxScrolled<wxPanel>, is not used in wx
itself and so doesn't seem to be instantiated) in DLL client even with VC > 6.
An alternative solution would be to change WXDLLIMPEXP_TEMPLATE_INSTANCE_CORE
macro to explicitly instantiate the template in the DLL even for VC > 6 but
this wouldn't solve the problem for wxScrolled<CustomClass> while removing the
DLL export declaration should.
Also use wxScrolled<wxWindow> in addition to wxScrolled<wxPanel> in the scroll
sample to test that it links correctly.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@62036 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Modify the status bar sample to use two fields of just the right size for
their contents to confirm that this doesn't work correctly under at least MSW
currently (see #10696).
Notice that we need two fields because the behaviour/problem is different for
the last field and all the other ones.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@61991 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
The sample code was complicated by having USE_STATIC_BITMAP and using
wxStaticBitmap or wxBitmapButton depending on it. Neither important for
a wxStatusBar sample so just use wxStaticBitmap always and make the code
simpler and more readable.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@61990 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
No real changes, just:
- Fix code which couldn't compile in USE_MDI_PARENT_FRAME case
- Use wxMenu::AppendCheckItem() instead of Append(..., true)
- Remove unnecessary #ifdef __WXMAC__
- Wrap excessively long lines
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@61988 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
0.2.5 versions of some makefiles were checked in, regenerate them using 0.2.6.
Also regenerate configure after autoconf_inc.m4 was updated.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@61946 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
These methods can be used to load objects from anywhere in the XRC resource
tree and not just from the top level.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@61934 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
Make it possible to customize the appearance of wxGrid corner window and its
row and column headers by defining custom renderers for them.
Add demonstration of this new feature to the grid sample and update the
documentation.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@61919 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
This should have been committed together with the changes to the debug flags
handling in build/bakefiles in r61887.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@61893 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
and wxPG_EX_TOOLBAR_SEPARATOR styles for finer control over borders.
Borders around property grid are now native for consistency.
Some strange VC6 compiler errors fixed, plus size assertion in
sample.
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@61880 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
