/////////////////////////////////////////////////////////////////////////////
// Name: sizer.h
// Purpose: interface of wxStdDialogButtonSizer
// Author: wxWidgets team
// RCS-ID: $Id$
// Licence: wxWindows license
/////////////////////////////////////////////////////////////////////////////
/**
A generic orientation value.
*/
enum wxOrientation
{
/* don't change the values of these elements, they are used elsewhere */
wxHORIZONTAL = 0x0004,
wxVERTICAL = 0x0008,
wxBOTH = wxVERTICAL | wxHORIZONTAL,
/* a mask to extract orientation from the combination of flags */
wxORIENTATION_MASK = wxBOTH
};
/**
@class wxStdDialogButtonSizer
This class creates button layouts which conform to the standard button spacing
and ordering defined by the platform or toolkit's user interface guidelines
(if such things exist). By using this class, you can ensure that all your
standard dialogs look correct on all major platforms. Currently it conforms to
the Windows, GTK+ and Mac OS X human interface guidelines.
When there aren't interface guidelines defined for a particular platform or
toolkit, wxStdDialogButtonSizer reverts to the Windows implementation.
To use this class, first add buttons to the sizer by calling
wxStdDialogButtonSizer::AddButton (or wxStdDialogButtonSizer::SetAffirmativeButton,
wxStdDialogButtonSizer::SetNegativeButton or wxStdDialogButtonSizer::SetCancelButton)
and then call Realize in order to create the actual button layout used.
Other than these special operations, this sizer works like any other sizer.
If you add a button with wxID_SAVE, on Mac OS X the button will be renamed to
"Save" and the wxID_NO button will be renamed to "Don't Save" in accordance
with the Mac OS X Human Interface Guidelines.
@library{wxcore}
@category{winlayout}
@see wxSizer, @ref overview_sizer, wxDialog::CreateButtonSizer
*/
class wxStdDialogButtonSizer : public wxBoxSizer
{
public:
/**
Constructor for a wxStdDialogButtonSizer.
*/
wxStdDialogButtonSizer();
/**
Adds a button to the wxStdDialogButtonSizer. The @a button must have
one of the following identifiers:
- wxID_OK
- wxID_YES
- wxID_SAVE
- wxID_APPLY
- wxID_CLOSE
- wxID_NO
- wxID_CANCEL
- wxID_HELP
- wxID_CONTEXT_HELP
*/
void AddButton(wxButton* button);
/**
Rearranges the buttons and applies proper spacing between buttons to make
them match the platform or toolkit's interface guidelines.
*/
void Realize();
/**
Sets the affirmative button for the sizer.
This allows you to use identifiers other than the standard identifiers
outlined above.
*/
void SetAffirmativeButton(wxButton* button);
/**
Sets the cancel button for the sizer.
This allows you to use identifiers other than the standard identifiers
outlined above.
*/
void SetCancelButton(wxButton* button);
/**
Sets the negative button for the sizer.
This allows you to use identifiers other than the standard identifiers
outlined above.
*/
void SetNegativeButton(wxButton* button);
};
/**
@class wxSizerItem
The wxSizerItem class is used to track the position, size and other
attributes of each item managed by a wxSizer.
It is not usually necessary to use this class because the sizer elements can
also be identified by their positions or window or sizer pointers but sometimes
it may be more convenient to use it directly.
@library{wxcore}
@category{winlayout}
*/
class wxSizerItem : public wxObject
{
public:
/**
Construct a sizer item for tracking a spacer.
*/
wxSizerItem(int width, int height, int proportion, int flag,
int border, wxObject* userData);
//@{
/**
Construct a sizer item for tracking a window.
*/
wxSizerItem(wxWindow* window, const wxSizerFlags& flags);
wxSizerItem(wxWindow* window, int proportion, int flag,
int border,
wxObject* userData);
//@}
//@{
/**
Construct a sizer item for tracking a subsizer.
*/
wxSizerItem(wxSizer* window, const wxSizerFlags& flags);
wxSizerItem(wxSizer* sizer, int proportion, int flag,
int border,
wxObject* userData);
//@}
/**
Deletes the user data and subsizer, if any.
*/
virtual ~wxSizerItem();
/**
Calculates the minimum desired size for the item, including any space
needed by borders.
*/
virtual wxSize CalcMin();
/**
Destroy the window or the windows in a subsizer, depending on the type
of item.
*/
virtual void DeleteWindows();
/**
Enable deleting the SizerItem without destroying the contained sizer.
*/
void DetachSizer();
/**
Return the border attribute.
*/
int GetBorder() const;
/**
Return the flags attribute.
See @ref wxsizer_flags "wxSizer flags list" for details.
*/
int GetFlag() const;
/**
Return the numeric id of wxSizerItem, or @c wxID_NONE if the id has
not been set.
*/
int GetId() const;
/**
Get the minimum size needed for the item.
*/
wxSize GetMinSize() const;
/**
Sets the minimum size to be allocated for this item.
If this item is a window, the @a size is also passed to
wxWindow::SetMinSize().
*/
void SetMinSize(const wxSize& size);
/**
@overload
*/
void SetMinSize(int x, int y);
/**
What is the current position of the item, as set in the last Layout.
*/
wxPoint GetPosition() const;
/**
Get the proportion item attribute.
*/
int GetProportion() const;
/**
Get the ration item attribute.
*/
float GetRatio() const;
/**
Get the rectangle of the item on the parent window, excluding borders.
*/
virtual wxRect GetRect();
/**
Get the current size of the item, as set in the last Layout.
*/
virtual wxSize GetSize() const;
/**
If this item is tracking a sizer, return it. @NULL otherwise.
*/
wxSizer* GetSizer() const;
/**
If this item is tracking a spacer, return its size.
*/
const wxSize GetSpacer() const;
/**
Get the userData item attribute.
*/
wxObject* GetUserData() const;
/**
If this item is tracking a window then return it. @NULL otherwise.
*/
wxWindow* GetWindow() const;
/**
Returns @true if this item is a window or a spacer and it is shown or
if this item is a sizer and not all of its elements are hidden.
In other words, for sizer items, all of the child elements must be
hidden for the sizer itself to be considered hidden.
As an exception, if the @c wxRESERVE_SPACE_EVEN_IF_HIDDEN flag was
used for this sizer item, then IsShown() always returns @true for it
(see wxSizerFlags::ReserveSpaceEvenIfHidden()).
*/
bool IsShown() const;
/**
Is this item a sizer?
*/
bool IsSizer() const;
/**
Is this item a spacer?
*/
bool IsSpacer() const;
/**
Is this item a window?
*/
bool IsWindow() const;
/**
Set the border item attribute.
*/
void SetBorder(int border);
/**
Set the position and size of the space allocated to the sizer, and
adjust the position and size of the item to be within that space
taking alignment and borders into account.
*/
virtual void SetDimension(const wxPoint& pos, const wxSize& size);
/**
Set the flag item attribute.
*/
void SetFlag(int flag);
/**
Sets the numeric id of the wxSizerItem to @e id.
*/
void SetId(int id);
/**
@todo docme.
*/
void SetInitSize(int x, int y);
/**
Set the proportion item attribute.
*/
void SetProportion(int proportion);
//@{
/**
Set the ratio item attribute.
*/
void SetRatio(int width, int height);
void SetRatio(wxSize size);
void SetRatio(float ratio);
//@}
/**
Set the sizer tracked by this item.
@deprecated @todo provide deprecation description
*/
void SetSizer(wxSizer* sizer);
/**
Set the size of the spacer tracked by this item.
@deprecated @todo provide deprecation description
*/
void SetSpacer(const wxSize& size);
/**
Set the window to be tracked by this item.
@deprecated @todo provide deprecation description
*/
void SetWindow(wxWindow* window);
/**
Set the show item attribute, which sizers use to determine if the item
is to be made part of the layout or not. If the item is tracking a
window then it is shown or hidden as needed.
*/
void Show(bool show);
};
/**
@class wxSizerFlags
Container for sizer items flags providing readable names for them.
Normally, when you add an item to a sizer via wxSizer::Add, you have to
specify a lot of flags and parameters which can be unwieldy. This is where
wxSizerFlags comes in: it allows you to specify all parameters using the
named methods instead. For example, instead of
@code
sizer->Add(ctrl, 0, wxEXPAND | wxALL, 10);
@endcode
you can now write
@code
sizer->Add(ctrl, wxSizerFlags().Expand().Border(wxALL, 10));
@endcode
This is more readable and also allows you to create wxSizerFlags objects which
can be reused for several sizer items.
@code
wxSizerFlags flagsExpand(1);
flagsExpand.Expand().Border(wxALL, 10);
sizer->Add(ctrl1, flagsExpand);
sizer->Add(ctrl2, flagsExpand);
@endcode
Note that by specification, all methods of wxSizerFlags return the wxSizerFlags
object itself to allowing chaining multiple methods calls like in the examples
above.
@library{wxcore}
@category{winlayout}
@see wxSizer
*/
class wxSizerFlags
{
public:
/**
Creates the wxSizer with the proportion specified by @a proportion.
*/
wxSizerFlags(int proportion = 0);
/**
Sets the alignment of this wxSizerFlags to @a align.
This method replaces the previously set alignment with the specified one.
@param align
Combination of @c wxALIGN_XXX bit masks.
@see Top(), Left(), Right(), Bottom(), Centre()
*/
wxSizerFlags& Align(int align = 0);
/**
Sets the wxSizerFlags to have a border of a number of pixels specified
by @a borderinpixels with the directions specified by @a direction.
*/
wxSizerFlags& Border(int direction, int borderinpixels);
/**
Sets the wxSizerFlags to have a border with size as returned by
GetDefaultBorder().
@param direction
Direction(s) to apply the border in.
*/
wxSizerFlags& Border(int direction = wxALL);
/**
Aligns the object to the bottom, similar for @c Align(wxALIGN_BOTTOM).
Unlike Align(), this method doesn't change the horizontal alignment of
the item.
*/
wxSizerFlags& Bottom();
/**
Sets the object of the wxSizerFlags to center itself in the area it is
given.
*/
wxSizerFlags& Center();
/**
Center() for people with the other dialect of English.
*/
wxSizerFlags& Centre();
/**
Sets the border in the given @a direction having twice the default
border size.
*/
wxSizerFlags& DoubleBorder(int direction = wxALL);
/**
Sets the border in left and right directions having twice the default
border size.
*/
wxSizerFlags& DoubleHorzBorder();
/**
Sets the object of the wxSizerFlags to expand to fill as much area as
it can.
*/
wxSizerFlags& Expand();
/**
Set the @c wxFIXED_MINSIZE flag which indicates that the initial size
of the window should be also set as its minimal size.
*/
wxSizerFlags& FixedMinSize();
/**
Set the @c wxRESERVE_SPACE_EVEN_IF_HIDDEN flag. Normally wxSizers
don't allocate space for hidden windows or other items. This flag
overrides this behavior so that sufficient space is allocated for the
window even if it isn't visible. This makes it possible to dynamically
show and hide controls without resizing parent dialog, for example.
@since 2.8.8
*/
wxSizerFlags& ReserveSpaceEvenIfHidden();
/**
Returns the border used by default in Border() method.
*/
static int GetDefaultBorder();
/**
Aligns the object to the left, similar for @c Align(wxALIGN_LEFT).
Unlike Align(), this method doesn't change the vertical alignment of
the item.
*/
wxSizerFlags& Left();
/**
Sets the proportion of this wxSizerFlags to @e proportion
*/
wxSizerFlags& Proportion(int proportion = 0);
/**
Aligns the object to the right, similar for @c Align(wxALIGN_RIGHT).
Unlike Align(), this method doesn't change the vertical alignment of
the item.
*/
wxSizerFlags& Right();
/**
Set the @c wx_SHAPED flag which indicates that the elements should
always keep the fixed width to height ratio equal to its original value.
*/
wxSizerFlags& Shaped();
/**
Aligns the object to the top, similar for @c Align(wxALIGN_TOP).
Unlike Align(), this method doesn't change the horizontal alignment of
the item.
*/
wxSizerFlags& Top();
/**
Sets the border in the given @a direction having thrice the default
border size.
*/
wxSizerFlags& TripleBorder(int direction = wxALL);
};
/**
@class wxNotebookSizer
@deprecated
This class is deprecated and should not be used in new code! It is no
longer needed, wxNotebook control can be inserted
into any sizer class and its minimal size will be determined correctly.
wxNotebookSizer is a specialized sizer to make sizers work in connection
with using notebooks. This sizer is different from any other sizer as you
must not add any children to it - instead, it queries the notebook class
itself. The only thing this sizer does is to determine the size of the
biggest page of the notebook and report an adjusted minimal size to a more
toplevel sizer.
@library{wxbase}
@category{winlayout}
@see wxSizer, wxNotebook,
@ref overview_sizer "Sizers overview"
*/
class wxNotebookSizer : public wxSizer
{
public:
/**
Constructor. It takes an associated notebook as its only parameter.
*/
wxNotebookSizer(wxNotebook* notebook);
/**
Returns the notebook associated with the sizer.
*/
wxNotebook* GetNotebook();
};
/**
@class wxFlexGridSizer
A flex grid sizer is a sizer which lays out its children in a two-dimensional
table with all table fields in one row having the same height and all fields
in one column having the same width, but all rows or all columns are not
necessarily the same height or width as in the wxGridSizer.
Since wxWidgets 2.5.0, wxFlexGridSizer can also size items equally in one
direction but unequally ("flexibly") in the other. If the sizer is only
flexible in one direction (this can be changed using wxFlexGridSizer::SetFlexibleDirection),
it needs to be decided how the sizer should grow in the other ("non-flexible")
direction in order to fill the available space.
The wxFlexGridSizer::SetNonFlexibleGrowMode() method serves this purpose.
@library{wxcore}
@category{winlayout}
@see wxSizer, @ref overview_sizer
*/
class wxFlexGridSizer : public wxGridSizer
{
public:
//@{
/**
Constructor for a wxFlexGridSizer.
@a rows and @a cols determine the number of columns and rows in the sizer -
if either of the parameters is zero, it will be calculated to form the
total number of children in the sizer, thus making the sizer grow
dynamically.
@a vgap and @a hgap define extra space between all children.
*/
wxFlexGridSizer(int rows, int cols, int vgap, int hgap);
wxFlexGridSizer(int cols, int vgap = 0, int hgap = 0);
//@}
/**
Specifies that column @a idx (starting from zero) should be grown if
there is extra space available to the sizer.
The @a proportion parameter has the same meaning as the stretch factor
for the sizers() except that if all proportions are 0, then all columns
are resized equally (instead of not being resized at all).
Notice that the row must not be already growable, if you need to change
the proportion you must call RemoveGrowableCol() first and then make it
growable (with a different proportion) again. You can use IsColGrowable()
to check whether a column is already growable.
*/
void AddGrowableCol(size_t idx, int proportion = 0);
/**
Specifies that row idx (starting from zero) should be grown if there
is extra space available to the sizer.
This is identical to AddGrowableCol() except that it works with rows
and not columns.
*/
void AddGrowableRow(size_t idx, int proportion = 0);
/**
Returns a wxOrientation value that specifies whether the sizer flexibly
resizes its columns, rows, or both (default).
@return
One of the following values:
- wxVERTICAL: Rows are flexibly sized.
- wxHORIZONTAL: Columns are flexibly sized.
- wxBOTH: Both rows and columns are flexibly sized (this is the default value).
@see SetFlexibleDirection()
*/
int GetFlexibleDirection() const;
/**
Returns the value that specifies how the sizer grows in the "non-flexible"
direction if there is one.
@return
One of the following values:
- wxFLEX_GROWMODE_NONE: Sizer doesn't grow in the non-flexible direction.
- wxFLEX_GROWMODE_SPECIFIED: Sizer honors growable columns/rows set with
AddGrowableCol() and AddGrowableRow(). In this case equal sizing applies
to minimum sizes of columns or rows (this is the default value).
- wxFLEX_GROWMODE_ALL: Sizer equally stretches all columns or rows in
the non-flexible direction, whether they are growable or not in the
flexible direction.
@see SetFlexibleDirection(), SetNonFlexibleGrowMode()
*/
int GetNonFlexibleGrowMode() const;
/**
Returns @true if column @a idx is growable.
@since 2.9.0
*/
bool IsColGrowable(size_t idx);
/**
Returns @true if row @a idx is growable.
@since 2.9.0
*/
bool IsRowGrowable(size_t idx);
/**
Specifies that column idx is no longer growable.
*/
void RemoveGrowableCol(size_t idx);
/**
Specifies that row idx is no longer growable.
*/
void RemoveGrowableRow(size_t idx);
/**
Specifies whether the sizer should flexibly resize its columns, rows, or both.
Argument @a direction can be @c wxVERTICAL, @c wxHORIZONTAL or @c wxBOTH
(which is the default value). Any other value is ignored.
See GetFlexibleDirection() for the explanation of these values.
Note that this method does not trigger relayout.
*/
void SetFlexibleDirection(int direction);
/**
Specifies how the sizer should grow in the non-flexible direction if
there is one (so SetFlexibleDirection() must have been called previously).
Argument @a mode can be one of those documented in GetNonFlexibleGrowMode(),
please see there for their explanation.
Note that this method does not trigger relayout.
*/
void SetNonFlexibleGrowMode(wxFlexSizerGrowMode mode);
};
/**
@class wxSizer
wxSizer is the abstract base class used for laying out subwindows in a window.
You cannot use wxSizer directly; instead, you will have to use one of the sizer
classes derived from it. Currently there are wxBoxSizer, wxStaticBoxSizer,
wxGridSizer, wxFlexGridSizer, wxWrapSizer and wxGridBagSizer.
The layout algorithm used by sizers in wxWidgets is closely related to layout
in other GUI toolkits, such as Java's AWT, the GTK toolkit or the Qt toolkit.
It is based upon the idea of the individual subwindows reporting their minimal
required size and their ability to get stretched if the size of the parent window
has changed.
This will most often mean that the programmer does not set the original size of
a dialog in the beginning, rather the dialog will be assigned a sizer and this
sizer will be queried about the recommended size. The sizer in turn will query
its children, which can be normal windows, empty space or other sizers, so that
a hierarchy of sizers can be constructed. Note that wxSizer does not derive
from wxWindow and thus does not interfere with tab ordering and requires very little
resources compared to a real window on screen.
What makes sizers so well fitted for use in wxWidgets is the fact that every
control reports its own minimal size and the algorithm can handle differences in
font sizes or different window (dialog item) sizes on different platforms without
problems. If e.g. the standard font as well as the overall design of Motif widgets
requires more space than on Windows, the initial dialog size will automatically
be bigger on Motif than on Windows.
Sizers may also be used to control the layout of custom drawn items on the
window. The wxSizer::Add(), wxSizer::Insert(), and wxSizer::Prepend() functions
return a pointer to the newly added wxSizerItem.
Just add empty space of the desired size and attributes, and then use the
wxSizerItem::GetRect() method to determine where the drawing operations
should take place.
Please notice that sizers, like child windows, are owned by the library and
will be deleted by it which implies that they must be allocated on the heap.
However if you create a sizer and do not add it to another sizer or
window, the library wouldn't be able to delete such an orphan sizer and in
this, and only this, case it should be deleted explicitly.
@beginWxPythonOnly
If you wish to create a sizer class in wxPython you should
derive the class from @c wxPySizer in order to get Python-aware
capabilities for the various virtual methods.
@endWxPythonOnly
@anchor wxsizer_flags
@par wxSizer flags
The "flag" argument accepted by wxSizeItem constructors and other
functions, e.g. wxSizer::Add(), is OR-combination of the following flags.
Two main behaviours are defined using these flags. One is the border around
a window: the border parameter determines the border width whereas the
flags given here determine which side(s) of the item that the border will
be added. The other flags determine how the sizer item behaves when the
space allotted to the sizer changes, and is somewhat dependent on the
specific kind of sizer used.
@beginDefList
@itemdef{wxTOP
wxBOTTOM
wxLEFT
wxRIGHT
wxALL,
These flags are used to specify which side(s) of the sizer item
the border width will apply to.}
@itemdef{wxEXPAND,
The item will be expanded to fill the space assigned to the item.}
@itemdef{wxSHAPED,
The item will be expanded as much as possible while also
maintaining its aspect ratio.}
@itemdef{wxFIXED_MINSIZE,
Normally wxSizers will use GetAdjustedBestSize() to determine what
the minimal size of window items should be, and will use that size
to calculate the layout. This allows layouts to adjust when an
item changes and its best size becomes different. If you would
rather have a window item stay the size it started with then use
wxFIXED_MINSIZE.}
@itemdef{wxRESERVE_SPACE_EVEN_IF_HIDDEN,
Normally wxSizers don't allocate space for hidden windows or other
items. This flag overrides this behavior so that sufficient space
is allocated for the window even if it isn't visible. This makes
it possible to dynamically show and hide controls without resizing
parent dialog, for example. (Available since 2.8.8.)
}
@itemdef{wxALIGN_CENTER
wxALIGN_CENTRE
wxALIGN_LEFT
wxALIGN_RIGHT
wxALIGN_TOP
wxALIGN_BOTTOM
wxALIGN_CENTER_VERTICAL
wxALIGN_CENTRE_VERTICAL
wxALIGN_CENTER_HORIZONTAL
wxALIGN_CENTRE_HORIZONTAL,
The wxALIGN flags allow you to specify the alignment of the item
within the space allotted to it by the sizer, adjusted for the
border if any.}
@endDefList
@library{wxcore}
@category{winlayout}
@see @ref overview_sizer
*/
class wxSizer : public wxObject
{
public:
/**
The constructor.
Note that wxSizer is an abstract base class and may not be instantiated.
*/
wxSizer();
/**
The destructor.
*/
virtual ~wxSizer();
/**
Appends a child to the sizer.
wxSizer itself is an abstract class, but the parameters are equivalent
in the derived classes that you will instantiate to use it so they are
described here:
@param window
The window to be added to the sizer. Its initial size (either set
explicitly by the user or calculated internally when using
wxDefaultSize) is interpreted as the minimal and in many cases also
the initial size.
@param flags
A wxSizerFlags object that enables you to specify most of the above
parameters more conveniently.
*/
wxSizerItem* Add(wxWindow* window, const wxSizerFlags& flags);
/**
Appends a child to the sizer.
wxSizer itself is an abstract class, but the parameters are equivalent
in the derived classes that you will instantiate to use it so they are
described here:
@param window
The window to be added to the sizer. Its initial size (either set
explicitly by the user or calculated internally when using
wxDefaultSize) is interpreted as the minimal and in many cases also
the initial size.
@param proportion
Although the meaning of this parameter is undefined in wxSizer, it
is used in wxBoxSizer to indicate if a child of a sizer can change
its size in the main orientation of the wxBoxSizer - where 0 stands
for not changeable and a value of more than zero is interpreted
relative to the value of other children of the same wxBoxSizer. For
example, you might have a horizontal wxBoxSizer with three
children, two of which are supposed to change their size with the
sizer. Then the two stretchable windows would get a value of 1 each
to make them grow and shrink equally with the sizer's horizontal
dimension.
@param flag
OR-combination of flags affecting sizer's behavior. See
@ref wxsizer_flags "wxSizer flags list" for details.
@param border
Determines the border width, if the flag parameter is set to
include any border flag.
@param userData
Allows an extra object to be attached to the sizer item, for use in
derived classes when sizing information is more complex than the
proportion and flag will allow for.
*/
wxSizerItem* Add(wxWindow* window,
int proportion = 0,
int flag = 0,
int border = 0,
wxObject* userData = NULL);
/**
Appends a child to the sizer.
wxSizer itself is an abstract class, but the parameters are equivalent
in the derived classes that you will instantiate to use it so they are
described here:
@param sizer
The (child-)sizer to be added to the sizer. This allows placing a
child sizer in a sizer and thus to create hierarchies of sizers
(typically a vertical box as the top sizer and several horizontal
boxes on the level beneath).
@param flags
A wxSizerFlags object that enables you to specify most of the above
parameters more conveniently.
*/
wxSizerItem* Add(wxSizer* sizer, const wxSizerFlags& flags);
/**
Appends a child to the sizer.
wxSizer itself is an abstract class, but the parameters are equivalent
in the derived classes that you will instantiate to use it so they are
described here:
@param sizer
The (child-)sizer to be added to the sizer. This allows placing a
child sizer in a sizer and thus to create hierarchies of sizers
(typically a vertical box as the top sizer and several horizontal
boxes on the level beneath).
@param proportion
Although the meaning of this parameter is undefined in wxSizer, it
is used in wxBoxSizer to indicate if a child of a sizer can change
its size in the main orientation of the wxBoxSizer - where 0 stands
for not changeable and a value of more than zero is interpreted
relative to the value of other children of the same wxBoxSizer. For
example, you might have a horizontal wxBoxSizer with three
children, two of which are supposed to change their size with the
sizer. Then the two stretchable windows would get a value of 1 each
to make them grow and shrink equally with the sizer's horizontal
dimension.
@param flag
OR-combination of flags affecting sizer's behavior. See
@ref wxsizer_flags "wxSizer flags list" for details.
@param border
Determines the border width, if the flag parameter is set to
include any border flag.
@param userData
Allows an extra object to be attached to the sizer item, for use in
derived classes when sizing information is more complex than the
proportion and flag will allow for.
*/
wxSizerItem* Add(wxSizer* sizer,
int proportion = 0,
int flag = 0,
int border = 0,
wxObject* userData = NULL);
/**
Appends a spacer child to the sizer.
wxSizer itself is an abstract class, but the parameters are equivalent
in the derived classes that you will instantiate to use it so they are
described here.
@a width and @a height specify the dimension of a spacer to be added to
the sizer. Adding spacers to sizers gives more flexibility in the
design of dialogs; imagine for example a horizontal box with two
buttons at the bottom of a dialog: you might want to insert a space
between the two buttons and make that space stretchable using the
proportion flag and the result will be that the left button will be
aligned with the left side of the dialog and the right button with the
right side - the space in between will shrink and grow with the dialog.
@param width
Width of the spacer.
@param height
Height of the spacer.
@param proportion
Although the meaning of this parameter is undefined in wxSizer, it
is used in wxBoxSizer to indicate if a child of a sizer can change
its size in the main orientation of the wxBoxSizer - where 0 stands
for not changeable and a value of more than zero is interpreted
relative to the value of other children of the same wxBoxSizer. For
example, you might have a horizontal wxBoxSizer with three
children, two of which are supposed to change their size with the
sizer. Then the two stretchable windows would get a value of 1 each
to make them grow and shrink equally with the sizer's horizontal
dimension.
@param flag
OR-combination of flags affecting sizer's behavior. See
@ref wxsizer_flags "wxSizer flags list" for details.
@param border
Determines the border width, if the flag parameter is set to
include any border flag.
@param userData
Allows an extra object to be attached to the sizer item, for use in
derived classes when sizing information is more complex than the
proportion and flag will allow for.
*/
wxSizerItem* Add(int width, int height,
int proportion = 0,
int flag = 0,
int border = 0,
wxObject* userData = NULL);
/**
Adds non-stretchable space to the sizer.
More readable way of calling:
@code
wxSizer::Add(size, size, 0).
@endcode
*/
wxSizerItem* AddSpacer(int size);
/**
Adds stretchable space to the sizer.
More readable way of calling:
@code
wxSizer::Add(0, 0, prop).
@endcode
*/
wxSizerItem* AddStretchSpacer(int prop = 1);
/**
This method is abstract and has to be overwritten by any derived class.
Here, the sizer will do the actual calculation of its children's minimal sizes.
*/
virtual wxSize CalcMin();
/**
Detaches all children from the sizer.
If @a delete_windows is @true then child windows will also be deleted.
*/
virtual void Clear(bool delete_windows = false);
/**
Computes client area size for @a window so that it matches the sizer's
minimal size. Unlike GetMinSize(), this method accounts for other
constraints imposed on @e window, namely display's size (returned size
will never be too large for the display) and maximum window size if
previously set by wxWindow::SetMaxSize().
The returned value is suitable for passing to wxWindow::SetClientSize() or
wxWindow::SetMinClientSize().
@since 2.8.8
@see ComputeFittingWindowSize(), Fit()
*/
wxSize ComputeFittingClientSize(wxWindow* window);
/**
Like ComputeFittingClientSize(), but converts the result into window
size. The returned value is suitable for passing to wxWindow::SetSize()
or wxWindow::SetMinSize().
@since 2.8.8
@see ComputeFittingClientSize(), Fit()
*/
wxSize ComputeFittingWindowSize(wxWindow* window);
/**
Detach the child @a window from the sizer without destroying it.
This method does not cause any layout or resizing to take place, call Layout()
to update the layout "on screen" after detaching a child from the sizer.
Returns @true if the child item was found and detached, @false otherwise.
@see Remove()
*/
virtual bool Detach(wxWindow* window);
/**
Detach the child @a sizer from the sizer without destroying it.
This method does not cause any layout or resizing to take place, call Layout()
to update the layout "on screen" after detaching a child from the sizer.
Returns @true if the child item was found and detached, @false otherwise.
@see Remove()
*/
virtual bool Detach(wxSizer* sizer);
/**
Detach a item at position @a index from the sizer without destroying it.
This method does not cause any layout or resizing to take place, call Layout()
to update the layout "on screen" after detaching a child from the sizer.
Returns @true if the child item was found and detached, @false otherwise.
@see Remove()
*/
bool Detach(size_t index);
/**
Tell the sizer to resize the @a window so that its client area matches the
sizer's minimal size (ComputeFittingClientSize() is called to determine it).
This is commonly done in the constructor of the window itself, see sample
in the description of wxBoxSizer.
@return The new window size.
@see ComputeFittingClientSize(), ComputeFittingWindowSize()
*/
wxSize Fit(wxWindow* window);
/**
Tell the sizer to resize the virtual size of the @a window to match the sizer's
minimal size. This will not alter the on screen size of the window, but may
cause the addition/removal/alteration of scrollbars required to view the virtual
area in windows which manage it.
@see wxScrolled::SetScrollbars(), SetVirtualSizeHints()
*/
void FitInside(wxWindow* window);
//@{
/**
Returns the list of the items in this sizer.
The elements of type-safe wxList @c wxSizerItemList are pointers to
objects of type wxSizerItem.
*/
wxSizerItemList& GetChildren();
const wxSizerItemList& GetChildren() const;
//@}
/**
Returns the window this sizer is used in or @NULL if none.
*/
wxWindow* GetContainingWindow() const;
/**
Finds wxSizerItem which holds the given @a window.
Use parameter @a recursive to search in subsizers too.
Returns pointer to item or @NULL.
*/
wxSizerItem* GetItem(wxWindow* window, bool recursive = false);
/**
Finds wxSizerItem which holds the given @a sizer.
Use parameter @a recursive to search in subsizers too.
Returns pointer to item or @NULL.
*/
wxSizerItem* GetItem(wxSizer* sizer, bool recursive = false);
/**
Finds wxSizerItem which is located in the sizer at position @a index.
Use parameter @a recursive to search in subsizers too.
Returns pointer to item or @NULL.
*/
wxSizerItem* GetItem(size_t index);
/**
Finds item of the sizer which has the given @e id.
This @a id is not the window id but the id of the wxSizerItem itself.
This is mainly useful for retrieving the sizers created from XRC resources.
Use parameter @a recursive to search in subsizers too.
Returns pointer to item or @NULL.
*/
wxSizerItem* GetItemById(int id, bool recursive = false);
/**
Returns the minimal size of the sizer.
This is either the combined minimal size of all the children and their
borders or the minimal size set by SetMinSize(), depending on which is bigger.
Note that the returned value is client size, not window size.
In particular, if you use the value to set toplevel window's minimal or
actual size, use wxWindow::SetMinClientSize() or wxWindow::SetClientSize(),
not wxWindow::SetMinSize() or wxWindow::SetSize().
*/
wxSize GetMinSize();
/**
Returns the current position of the sizer.
*/
wxPoint GetPosition() const;
/**
Returns the current size of the sizer.
*/
wxSize GetSize() const;
/**
Hides the child @a window.
To make a sizer item disappear, use Hide() followed by Layout().
Use parameter @a recursive to hide elements found in subsizers.
Returns @true if the child item was found, @false otherwise.
@see IsShown(), Show()
*/
bool Hide(wxWindow* window, bool recursive = false);
/**
Hides the child @a sizer.
To make a sizer item disappear, use Hide() followed by Layout().
Use parameter @a recursive to hide elements found in subsizers.
Returns @true if the child item was found, @false otherwise.
@see IsShown(), Show()
*/
bool Hide(wxSizer* sizer, bool recursive = false);
/**
Hides the item at position @a index.
To make a sizer item disappear, use Hide() followed by Layout().
Use parameter @a recursive to hide elements found in subsizers.
Returns @true if the child item was found, @false otherwise.
@see IsShown(), Show()
*/
bool Hide(size_t index);
/**
Insert a child into the sizer before any existing item at @a index.
See Add() for the meaning of the other parameters.
*/
wxSizerItem* Insert(size_t index, wxWindow* window,
const wxSizerFlags& flags);
/**
Insert a child into the sizer before any existing item at @a index.
See Add() for the meaning of the other parameters.
*/
wxSizerItem* Insert(size_t index, wxWindow* window,
int proportion = 0,
int flag = 0,
int border = 0,
wxObject* userData = NULL);
/**
Insert a child into the sizer before any existing item at @a index.
See Add() for the meaning of the other parameters.
*/
wxSizerItem* Insert(size_t index, wxSizer* sizer,
const wxSizerFlags& flags);
/**
Insert a child into the sizer before any existing item at @a index.
See Add() for the meaning of the other parameters.
*/
wxSizerItem* Insert(size_t index, wxSizer* sizer,
int proportion = 0,
int flag = 0,
int border = 0,
wxObject* userData = NULL);
/**
Insert a child into the sizer before any existing item at @a index.
See Add() for the meaning of the other parameters.
*/
wxSizerItem* Insert(size_t index, int width, int height,
int proportion = 0,
int flag = 0,
int border = 0,
wxObject* userData = NULL);
/**
Inserts non-stretchable space to the sizer.
More readable way of calling wxSizer::Insert(size, size, 0).
*/
wxSizerItem* InsertSpacer(size_t index, int size);
/**
Inserts stretchable space to the sizer.
More readable way of calling wxSizer::Insert(0, 0, prop).
*/
wxSizerItem* InsertStretchSpacer(size_t index, int prop = 1);
/**
Returns @true if the @a window is shown.
@see Hide(), Show(), wxSizerItem::IsShown()
*/
bool IsShown(wxWindow* window) const;
/**
Returns @true if the @a sizer is shown.
@see Hide(), Show(), wxSizerItem::IsShown()
*/
bool IsShown(wxSizer* sizer) const;
/**
Returns @true if the item at @a index is shown.
@see Hide(), Show(), wxSizerItem::IsShown()
*/
bool IsShown(size_t index) const;
/**
Call this to force layout of the children anew, e.g. after having added a child
to or removed a child (window, other sizer or space) from the sizer while
keeping the current dimension.
*/
virtual void Layout();
/**
Same as Add(), but prepends the items to the beginning of the
list of items (windows, subsizers or spaces) owned by this sizer.
*/
wxSizerItem* Prepend(wxWindow* window, const wxSizerFlags& flags);
/**
Same as Add(), but prepends the items to the beginning of the
list of items (windows, subsizers or spaces) owned by this sizer.
*/
wxSizerItem* Prepend(wxWindow* window, int proportion = 0,
int flag = 0,
int border = 0,
wxObject* userData = NULL);
/**
Same as Add(), but prepends the items to the beginning of the
list of items (windows, subsizers or spaces) owned by this sizer.
*/
wxSizerItem* Prepend(wxSizer* sizer,
const wxSizerFlags& flags);
/**
Same as Add(), but prepends the items to the beginning of the
list of items (windows, subsizers or spaces) owned by this sizer.
*/
wxSizerItem* Prepend(wxSizer* sizer, int proportion = 0,
int flag = 0,
int border = 0,
wxObject* userData = NULL);
/**
Same as Add(), but prepends the items to the beginning of the
list of items (windows, subsizers or spaces) owned by this sizer.
*/
wxSizerItem* Prepend(int width, int height,
int proportion = 0,
int flag = 0,
int border = 0,
wxObject* userData = NULL);
/**
Prepends non-stretchable space to the sizer.
More readable way of calling wxSizer::Prepend(size, size, 0).
*/
wxSizerItem* PrependSpacer(int size);
/**
Prepends stretchable space to the sizer.
More readable way of calling wxSizer::Prepend(0, 0, prop).
*/
wxSizerItem* PrependStretchSpacer(int prop = 1);
/**
This method is abstract and has to be overwritten by any derived class.
Here, the sizer will do the actual calculation of its children's
positions and sizes.
*/
virtual void RecalcSizes();
/**
Removes a child window from the sizer, but does @b not destroy it
(because windows are owned by their parent window, not the sizer).
@deprecated
The overload of this method taking a wxWindow* parameter
is deprecated as it does not destroy the window as would usually be
expected from Remove(). You should use Detach() in new code instead.
There is currently no wxSizer method that will both detach and destroy
a wxWindow item.
@note This method does not cause any layout or resizing to take
place, call Layout() to update the layout "on screen" after
removing a child from the sizer.
@return @true if the child item was found and removed, @false otherwise.
*/
bool Remove(wxWindow* window);
/**
Removes a sizer child from the sizer and destroys it.
@note This method does not cause any layout or resizing to take
place, call Layout() to update the layout "on screen" after
removing a child from the sizer.
@param sizer The wxSizer to be removed.
@return @true if the child item was found and removed, @false otherwise.
*/
virtual bool Remove(wxSizer* sizer);
/**
Removes a child from the sizer and destroys it if it is a sizer or a
spacer, but not if it is a window (because windows are owned by their
parent window, not the sizer).
@note This method does not cause any layout or resizing to take
place, call Layout() to update the layout "on screen" after
removing a child from the sizer.
@param index
The position of the child in the sizer, e.g. 0 for the first item.
@return @true if the child item was found and removed, @false otherwise.
*/
bool Remove(size_t index);
/**
Detaches the given @a oldwin from the sizer and replaces it with the
given @a newwin. The detached child window is @b not deleted (because
windows are owned by their parent window, not the sizer).
Use parameter @a recursive to search the given element recursively in subsizers.
This method does not cause any layout or resizing to take place,
call Layout() to update the layout "on screen" after replacing a
child from the sizer.
Returns @true if the child item was found and removed, @false otherwise.
*/
bool Replace(wxWindow* oldwin, wxWindow* newwin,
bool recursive = false);
/**
Detaches the given @a oldsz from the sizer and replaces it with the
given @a newsz. The detached child sizer is deleted.
Use parameter @a recursive to search the given element recursively in subsizers.
This method does not cause any layout or resizing to take place,
call Layout() to update the layout "on screen" after replacing a
child from the sizer.
Returns @true if the child item was found and removed, @false otherwise.
*/
bool Replace(wxSizer* oldsz, wxSizer* newsz,
bool recursive = false);
/**
Detaches the given item at position @a index from the sizer and
replaces it with the given wxSizerItem @a newitem.
The detached child is deleted @b only if it is a sizer or a spacer
(but not if it is a wxWindow because windows are owned by their
parent window, not the sizer).
This method does not cause any layout or resizing to take place,
call Layout() to update the layout "on screen" after replacing a
child from the sizer.
Returns @true if the child item was found and removed, @false otherwise.
*/
virtual bool Replace(size_t index, wxSizerItem* newitem);
/**
Call this to force the sizer to take the given dimension and thus force
the items owned by the sizer to resize themselves according to the
rules defined by the parameter in the Add() and Prepend() methods.
*/
void SetDimension(int x, int y, int width, int height);
/**
@overload
*/
void SetDimension(const wxPoint& pos, const wxSize& size);
/**
Set an item's minimum size by window, sizer, or position.
The item will be found recursively in the sizer's descendants.
This function enables an application to set the size of an item after
initial creation.
@see wxSizerItem::SetMinSize()
*/
void SetItemMinSize(wxWindow* window, int width, int height);
/**
Set an item's minimum size by window, sizer, or position.
The item will be found recursively in the sizer's descendants.
This function enables an application to set the size of an item after
initial creation.
@see wxSizerItem::SetMinSize()
*/
void SetItemMinSize(wxSizer* sizer, int width, int height);
/**
Set an item's minimum size by window, sizer, or position.
The item will be found recursively in the sizer's descendants.
This function enables an application to set the size of an item after
initial creation.
@see wxSizerItem::SetMinSize()
*/
void SetItemMinSize(size_t index, int width, int height);
/**
Call this to give the sizer a minimal size.
Normally, the sizer will calculate its minimal size based purely on how
much space its children need. After calling this method GetMinSize()
will return either the minimal size as requested by its children or the
minimal size set here, depending on which is bigger.
*/
void SetMinSize(const wxSize& size);
/**
@overload
*/
void SetMinSize(int width, int height);
/**
This method first calls Fit() and then wxTopLevelWindow::SetSizeHints()
on the @a window passed to it.
This only makes sense when @a window is actually a wxTopLevelWindow such
as a wxFrame or a wxDialog, since SetSizeHints only has any effect in these classes.
It does nothing in normal windows or controls.
This method is implicitly used by wxWindow::SetSizerAndFit() which is
commonly invoked in the constructor of a toplevel window itself (see
the sample in the description of wxBoxSizer) if the toplevel window is
resizable.
*/
void SetSizeHints(wxWindow* window);
/**
Tell the sizer to set the minimal size of the @a window virtual area to match
the sizer's minimal size. For windows with managed scrollbars this will set them
appropriately.
@deprecated @todo provide deprecation description
@see wxScrolled::SetScrollbars()
*/
void SetVirtualSizeHints(wxWindow* window);
/**
Shows or hides the @a window.
To make a sizer item disappear or reappear, use Show() followed by Layout().
Use parameter @a recursive to show or hide elements found in subsizers.
Returns @true if the child item was found, @false otherwise.
@see Hide(), IsShown()
*/
bool Show(wxWindow* window, bool show = true,
bool recursive = false);
/**
Shows or hides @a sizer.
To make a sizer item disappear or reappear, use Show() followed by Layout().
Use parameter @a recursive to show or hide elements found in subsizers.
Returns @true if the child item was found, @false otherwise.
@see Hide(), IsShown()
*/
bool Show(wxSizer* sizer, bool show = true,
bool recursive = false);
/**
Shows the item at @a index.
To make a sizer item disappear or reappear, use Show() followed by Layout().
Returns @true if the child item was found, @false otherwise.
@see Hide(), IsShown()
*/
bool Show(size_t index, bool show = true);
};
/**
@class wxGridSizer
A grid sizer is a sizer which lays out its children in a two-dimensional
table with all table fields having the same size, i.e. the width of each
field is the width of the widest child, the height of each field is the
height of the tallest child.
@library{wxcore}
@category{winlayout}
@see wxSizer, @ref overview_sizer
*/
class wxGridSizer : public wxSizer
{
public:
//@{
/**
Constructor for a wxGridSizer.
@a rows and @a cols determine the number of columns and rows in the sizer -
if either of the parameters is zero, it will be calculated to form the
total number of children in the sizer, thus making the sizer grow dynamically.
@a vgap and @a hgap define extra space between all children.
*/
wxGridSizer(int rows, int cols, int vgap, int hgap);
wxGridSizer(int cols, int vgap = 0, int hgap = 0);
//@}
/**
Returns the number of columns in the sizer.
*/
int GetCols() const;
/**
Returns the horizontal gap (in pixels) between cells in the sizer.
*/
int GetHGap() const;
/**
Returns the number of rows in the sizer.
*/
int GetRows() const;
/**
Returns the vertical gap (in pixels) between the cells in the sizer.
*/
int GetVGap() const;
/**
Sets the number of columns in the sizer.
*/
void SetCols(int cols);
/**
Sets the horizontal gap (in pixels) between cells in the sizer.
*/
void SetHGap(int gap);
/**
Sets the number of rows in the sizer.
*/
void SetRows(int rows);
/**
Sets the vertical gap (in pixels) between the cells in the sizer.
*/
void SetVGap(int gap);
};
/**
@class wxStaticBoxSizer
wxStaticBoxSizer is a sizer derived from wxBoxSizer but adds a static
box around the sizer.
This static box may be either created independently or the sizer may create
it itself as a convenience. In any case, the sizer owns the wxStaticBox control
and will delete it, if it is deleted.
@library{wxcore}
@category{winlayout}
@see wxSizer, wxStaticBox, wxBoxSizer, @ref overview_sizer
*/
class wxStaticBoxSizer : public wxBoxSizer
{
public:
/**
This constructor uses an already existing static box.
It takes the associated static box and the orientation @a orient, which
can be either @c wxVERTICAL or @c wxHORIZONTAL as parameters.
*/
wxStaticBoxSizer(wxStaticBox* box, int orient);
/**
This constructor creates a new static box with the given label and parent window.
*/
wxStaticBoxSizer(int orient, wxWindow parent,
const wxString& label = wxEmptyString);
/**
Returns the static box associated with the sizer.
*/
wxStaticBox* GetStaticBox() const;
};
/**
@class wxBoxSizer
The basic idea behind a box sizer is that windows will most often be laid out
in rather simple basic geometry, typically in a row or a column or several
hierarchies of either.
For more information, please see @ref overview_sizer_box.
@library{wxcore}
@category{winlayout}
@see wxSizer, @ref overview_sizer
*/
class wxBoxSizer : public wxSizer
{
public:
/**
Constructor for a wxBoxSizer. @a orient may be either of wxVERTICAL
or wxHORIZONTAL for creating either a column sizer or a row sizer.
*/
wxBoxSizer(int orient);
/**
Implements the calculation of a box sizer's minimal.
It is used internally only and must not be called by the user.
Documented for information.
*/
virtual wxSize CalcMin();
/**
Returns the orientation of the box sizer, either wxVERTICAL
or wxHORIZONTAL.
*/
int GetOrientation() const;
/**
Implements the calculation of a box sizer's dimensions and then sets
the size of its children (calling wxWindow::SetSize if the child is a window).
It is used internally only and must not be called by the user
(call Layout() if you want to resize). Documented for information.
*/
void RecalcSizes();
};