///////////////////////////////////////////////////////////////////////////// // Name: wx/msw/setup.h // Purpose: Configuration for the library // Author: Julian Smart // Modified by: // Created: 01/02/97 // RCS-ID: $Id$ // Copyright: (c) Julian Smart // Licence: wxWindows licence ///////////////////////////////////////////////////////////////////////////// #ifndef _WX_SETUP_H_ #define _WX_SETUP_H_ // ---------------------------------------------------------------------------- // global settings // ---------------------------------------------------------------------------- // define this to 0 when building wxBase library #define wxUSE_GUI 1 // ---------------------------------------------------------------------------- // compatibility settings // ---------------------------------------------------------------------------- // This setting determines the compatibility with 1.68 API: // Level 0: no backward compatibility, all new features // Level 1: some extra methods are defined for compatibility. // // Default is 0. // // Recommended setting: 0 (in fact the compatibility code is now very minimal // so there is little advantage to setting it to 1. #define WXWIN_COMPATIBILITY 0 // in wxMSW version 2.1.11 and earlier, wxIcon always derives from wxBitmap, // but this is very dangerous because you can mistakenly pass an icon instead // of a bitmap to a function taking "const wxBitmap&" - which will *not* work // because an icon is not a valid bitmap // // Starting from 2.1.12, you have the choice under this backwards compatible // behaviour (your code will still compile, but probably won't behave as // expected!) and not deriving wxIcon class from wxBitmap, but providing a // conversion ctor wxBitmap(const wxIcon&) instead. // // Recommended setting: 0 #define wxICON_IS_BITMAP 0 // ---------------------------------------------------------------------------- // non GUI features selection // ---------------------------------------------------------------------------- // Set wxUSE_LONGLONG to 1 to compile the wxLongLong class. This is a 64 bit // integer which is implemented in terms of native 64 bit integers if any or // uses emulation otherwise. // // This class is required by wxDateTime and so you should enable it if you want // to use wxDateTime. For most modern platforms, it will use the native 64 bit // integers in which case (almost) all of its functions are inline and it // almost does not take any space, so there should be no reason to switch it // off. // // Recommended setting: 1 #define wxUSE_LONGLONG 1 // Set wxUSE_TIMEDATE to 1 to compile the wxDateTime and related classes which // allow to manipulate dates, times and time intervals. wxDateTime replaces the // old wxTime and wxDate classes which are still provided for backwards // compatibility (and implemented in terms of wxDateTime). // // Note that this class is relatively new and is still officially in alpha // stage because some features are not yet (fully) implemented. It is already // quite useful though and should only be disabled if you are aiming at // absolutely minimal version of the library. // // Requires: wxUSE_LONGLONG // // Recommended setting: 1 #define wxUSE_TIMEDATE 1 // Setting wxUSE_CONFIG to 1 enables the use of wxConfig and related classes // which allow the application to store its settings in the persistent // storage. Setting this to 1 will also enable on-demand creation of the // global config object in wxApp. // // See also wxUSE_CONFIG_NATIVE below. // // Recommended setting: 1 #define wxUSE_CONFIG 1 // If wxUSE_CONFIG is 1, you may choose to use either the native config // classes under Windows (using .INI files under Win16 and the registry under // Win32) or the portable text file format used by the config classes under // Unix. // // Default is 1 to use native classes. Note that you may still use // wxFileConfig even if you set this to 1 - just the config object created by // default for the applications needs will be a wxRegConfig or wxIniConfig and // not wxFileConfig. // // Recommended setting: 1 #define wxUSE_CONFIG_NATIVE 1 // If wxUSE_DIALUP_MANAGER is 1, compile in wxDialUpManager class which allows // to connect/disconnect from the network and be notified whenever the dial-up // network connection is established/terminated. // // Default is 1. // // Recommended setting: 1 #define wxUSE_DIALUP_MANAGER 1 // ---------------------------------------------------------------------------- // Optional controls // ---------------------------------------------------------------------------- // wxToolBar related settings: if wxUSE_TOOLBAR is 0, don't compile any toolbar // classes at all. Otherwise, use the native toolbar class unless // wxUSE_TOOLBAR_NATIVE is 0. Additionally, the generic toolbar class which // supports some features which might not be supported by the native wxToolBar // class may be compiled in if wxUSE_TOOLBAR_SIMPLE is 1. // // Default is 1 for all settings. // // Recommended setting: 1 for wxUSE_TOOLBAR and wxUSE_TOOLBAR_NATIVE and 0 for // wxUSE_TOOLBAR_SIMPLE (the default is 1 mainly for backwards compatibility). #define wxUSE_TOOLBAR 1 #define wxUSE_TOOLBAR_NATIVE 1 #define wxUSE_TOOLBAR_SIMPLE 1 // wxNotebook is a control with several "tabs" located on one of its sides. It // may be used ot logically organise the data presented to the user instead of // putting everything in one huge dialog. It replaces wxTabControl and related // classes of wxWin 1.6x. // // Default is 1. // // Recommended setting: 1 #define wxUSE_NOTEBOOK 1 // The corresponding controls will be compiled in if wxUSE_ is set to // 1 and not compiled into the library otherwise. // // Default is 1 for everything. // // Recommended setting: 1 (library might fail to compile for some combinations // of disabled controls) #define wxUSE_COMBOBOX 1 #define wxUSE_CHOICE 1 #define wxUSE_RADIOBTN 1 #define wxUSE_RADIOBOX 1 #define wxUSE_SCROLLBAR 1 #define wxUSE_CHECKBOX 1 #define wxUSE_LISTBOX 1 #define wxUSE_SPINBTN 1 #define wxUSE_SPINCTRL 1 #define wxUSE_STATLINE 1 #define wxUSE_CHECKLISTBOX 1 #define wxUSE_CHOICE 1 #define wxUSE_CARET 1 #define wxUSE_SLIDER 1 // ---------------------------------------------------------------------------- // Metafiles support // ---------------------------------------------------------------------------- // Windows supports the graphics format known as metafile which is, though not // portable, is widely used under Windows and so is supported by wxWin (under // Windows only, of course). Win16 (Win3.1) used the so-called "Window // MetaFiles" or WMFs which were replaced with "Enhanced MetaFiles" or EMFs in // Win32 (Win9x, NT, 2000). Both of these are supported in wxWin and, by // default, WMFs will be used under Win16 and EMFs under Win32. This may be // changed by setting wxUSE_WIN_METAFILES_ALWAYS to 1 and/or setting // wxUSE_ENH_METAFILE to 0. You may also set wxUSE_METAFILE to 0 to not compile // in any metafile related classes at all. // // Default is 1 for wxUSE_ENH_METAFILE and 0 for wxUSE_WIN_METAFILES_ALWAYS. // // Recommended setting: default or 0 for everything for portable programs. #define wxUSE_METAFILE 1 #define wxUSE_ENH_METAFILE 1 #define wxUSE_WIN_METAFILES_ALWAYS 0 // ---------------------------------------------------------------------------- // Postscript support settings // ---------------------------------------------------------------------------- #define wxUSE_POSTSCRIPT 0 // 0 for no PostScript device context #define wxUSE_AFM_FOR_POSTSCRIPT 0 // 1 to use font metric files in GetTextExtent #define wxUSE_IPC 1 // 0 for no interprocess comms // Note: wxHELP uses IPC under X so these are interdependent! #define wxUSE_HELP 1 // 0 for no help facility #define wxUSE_RESOURCES 1 // 0 for no wxGetResource/wxWriteResource #define wxUSE_CONSTRAINTS 1 // 0 for no window layout constraint system #define wxUSE_CLIPBOARD 1 // 0 for no clipboard functions #define wxUSE_SPLINES 1 // 0 for no splines #define wxUSE_DRAG_AND_DROP 1 // 0 for no drag and drop #define wxUSE_BUTTONBAR 1 // Define 1 to use buttonbar classes (enhanced toolbar // for MS Windows) #define wxUSE_GAUGE 1 // Define 1 to use Microsoft's gauge (Windows) // or Bull's gauge (Motif) library (both in contrib). #define wxUSE_NEW_GRID 1 // Define 1 to use the new wxGrid class // (still under development, define 0 to // use existing wxGrid class) #define wxUSE_XPM_IN_MSW 1 // Define 1 to support the XPM package in wxBitmap. #define wxUSE_IMAGE_LOADING_IN_MSW 1 // Use dynamic DIB loading/saving code in utils/dib under MSW. #define wxUSE_RESOURCE_LOADING_IN_MSW 1 // Use dynamic icon/cursor loading/saving code // under MSW. #define wxUSE_WX_RESOURCES 1 // Use .wxr resource mechanism (requires PrologIO library) #define wxUSE_STARTUP_TIPS 1 // support for startup tips (wxShowTip &c) #define wxUSE_DOC_VIEW_ARCHITECTURE 1 // Set to 0 to disable document/view architecture #define wxUSE_MDI_ARCHITECTURE 1 // Set to 0 to disable MDI document/view architecture #define wxUSE_PRINTING_ARCHITECTURE 1 // Set to 0 to disable print/preview architecture code #define wxUSE_POSTSCRIPT_ARCHITECTURE_IN_MSW 1 // Set to 0 to disable PostScript print/preview architecture code // under Windows (just use Windows printing). #define wxUSE_DYNAMIC_CLASSES 1 // If 1, enables provision of run-time type information. // NOW MANDATORY: don't change. #define wxUSE_MEMORY_TRACING 1 // If 1, enables debugging versions of wxObject::new and // wxObject::delete *IF* __WXDEBUG__ is also defined. // WARNING: this code may not work with all architectures, especially // if alignment is an issue. #define wxUSE_DEBUG_CONTEXT 1 // If 1, enables wxDebugContext, for // writing error messages to file, etc. // If __WXDEBUG__ is not defined, will still use // normal memory operators. // It's recommended to set this to 1, // since you may well need to output // an error log in a production // version (or non-debugging beta) #define wxUSE_GLOBAL_MEMORY_OPERATORS 1 // In debug mode, cause new and delete to be redefined globally. // If this causes problems (e.g. link errors), set this to 0. #define wxUSE_DEBUG_NEW_ALWAYS 1 // In debug mode, causes new to be defined to // be WXDEBUG_NEW (see object.h). // If this causes problems (e.g. link errors), set this to 0. // You may need to set this to 0 if using templates (at least // for VC++). #define REMOVE_UNUSED_ARG 1 // Set this to 0 if your compiler can't cope // with omission of prototype parameters. #define wxUSE_ODBC 0 // Define 1 to use ODBC classes #define wxODBC_FWD_ONLY_CURSORS 1 // For backward compatibility reasons, this parameter now only // controls the default scrolling method used by cursors. This // default behavior can be overriden by setting the second param // of wxDB::GetDbConnection() to indicate whether the connection // (and any wxTable()s that use the connection) should support // forward only scrolling of cursors, or both forward and backward // Support for backward scrolling cursors is dependent on the // data source as well as the ODBC driver being used. #ifndef __MWERKS__ #define wxUSE_IOSTREAMH 1 #else #define wxUSE_IOSTREAMH 1 #endif // VC++ 4.2 and above allows and // but you can't mix them. Set to 1 for , // 0 for #define wxUSE_STREAMS 1 // If enabled (1), compiles wxWindows streams classes #define wxUSE_STD_IOSTREAM 0 // Use standard C++ streams if 1. If 0, use wxWin // streams implementation. #define wxUSE_WXCONFIG 1 // if enabled, compiles built-in OS independent wxConfig // class and it's file (any platform) and registry (Win) // based implementations #define wxUSE_THREADS 1 // support for multithreaded applications: if // 1, compile in thread classes (thread.h) // and make the library thread safe #define wxUSE_ZLIB 1 // Use zlib for compression in streams and PNG code #define wxUSE_LIBPNG 1 // Use PNG bitmap/image code #define wxUSE_LIBJPEG 1 // Use JPEG bitmap/image code #define wxUSE_LIBTIFF 0 // Use TIFF bitmap/image code #define wxUSE_GIF 1 // Use GIF bitmap/image code #define wxUSE_PNM 1 // Use PNM bitmap/image code #define wxUSE_PCX 1 // Use PCX bitmap/image code #define wxUSE_SERIAL 0 // Use serialization (requires utils/serialize) #define wxUSE_DYNLIB_CLASS 0 // Compile in wxLibrary class for run-time // DLL loading and function calling #define wxUSE_TOOLTIPS 1 // Define to use wxToolTip class and // wxWindow::SetToolTip() method #define wxUSE_SOCKETS 1 // Set to 1 to use socket classes #define wxUSE_HTML 1 // Set to 1 to use wxHTML sub-library #define wxUSE_FS_ZIP 1 #define wxUSE_FS_INET 1 // Set to 1 to enable virtual file systems #define wxUSE_BUSYINFO 1 // wxBusyInfo displays window with message // when app is busy. Works in same way as // wxBusyCursor #define wxUSE_ZIPSTREAM 1 // input stream for reading from zip archives /* * Finer detail * */ #define wxUSE_APPLE_IEEE 1 // if enabled, the float codec written by Apple // will be used to write, in a portable way, // float on the disk // use wxFile class - required by i18n code, wxConfig and others - recommended #define wxUSE_FILE 1 // use wxTextFile class: requires wxFile, required by wxConfig #define wxUSE_TEXTFILE 1 // i18n support: _() macro, wxLocale class. Requires wxFile #define wxUSE_INTL 1 // wxLogXXX functions - highly recommended #define wxUSE_LOG 1 // wxValidator class #define wxUSE_VALIDATORS 1 // wxAcceleratorTable/Entry classes and support for them in wxMenu(Bar) #define wxUSE_ACCEL 1 // wxSashWindow class #define wxUSE_SASH 1 // text entry dialog and wxGetTextFromUser function #define wxUSE_TEXTDLG 1 // wxStatusBar class #define wxUSE_STATUSBAR 1 // progress dialog class for lengthy operations #define wxUSE_PROGRESSDLG 1 // wxDirDlg class for getting a directory name from user #define wxUSE_DIRDLG 1 /* * MS Windows/Windows NT * */ #define wxUSE_OLE 1 // drag-and-drop, clipboard, OLE Automation #if defined(__WIN95__) #define wxUSE_CTL3D 0 #else #define wxUSE_CTL3D 1 // Define 1 to use Microsoft CTL3D library. // See note above about using FAFA and CTL3D. #endif // can we use RICHEDIT control? #if defined(__WIN95__) && !defined(__TWIN32__) && !defined(__GNUWIN32_OLD__) #define wxUSE_RICHEDIT 1 #else #define wxUSE_RICHEDIT 0 #endif #define wxUSE_COMMON_DIALOGS 1 // On rare occasions (e.g. using DJGPP) may want // to omit common dialogs // (e.g. file selector, printer dialog). // Switching this off also switches off // the printing architecture and interactive // wxPrinterDC. #define wxUSE_ITSY_BITSY 1 // Define 1 to use Microsoft's ItsyBitsy // small title bar library, for wxMiniFrame #define wxUSE_BITMAP_MESSAGE 1 // Define 1 to use bitmap messages. #define wxUSE_PORTABLE_FONTS_IN_MSW 0 // Define 1 to use new portable font scheme in Windows // (used by default under X) #define wxFONT_SIZE_COMPATIBILITY 0 // Define 1 for font size to be backward compatible // to 1.63 and earlier. 1.64 and later define point // sizes to be compatible with Windows. #define wxUSE_GENERIC_DIALOGS_IN_MSW 1 // Define 1 to use generic dialogs in Windows, even though // they duplicate native common dialog (e.g. wxColourDialog) #define wxUSE_PENWINDOWS 0 // Set to 1 to use PenWindows #define wxUSE_OWNER_DRAWN 1 // Owner-drawn menus and listboxes #define wxUSE_NATIVE_STATUSBAR 1 // Set to 0 to use cross-platform wxStatusBar /* * Any platform * */ #define wxUSE_TYPEDEFS 0 // Use typedefs not classes for wxPoint // and others, to reduce overhead and avoid // MS C7 memory bug. Bounds checker // complains about deallocating // arrays of wxPoints if wxPoint is a class. #if defined(__MINGW32__) && ((__GNUC__>2) ||((__GNUC__==2) && (__GNUC_MINOR__>=95))) #ifndef wxUSE_NORLANDER_HEADERS # define wxUSE_NORLANDER_HEADERS 1 #endif #endif #if (!defined(WIN32) && !defined(__WIN32__)) || (defined(__GNUWIN32__) && !defined(wxUSE_NORLANDER_HEADERS)) // Can't use OLE drag and drop in Windows 3.1 because we don't know how // to implement UUIDs // GnuWin32 doesn't have appropriate headers for e.g. IUnknown. #undef wxUSE_DRAG_AND_DROP #define wxUSE_DRAG_AND_DROP 0 #endif // Only WIN32 supports wxStatusBar95 #if !defined(__WIN32__) && wxUSE_NATIVE_STATUSBAR #undef wxUSE_NATIVE_STATUSBAR #define wxUSE_NATIVE_STATUSBAR 0 #endif // Salford C++ doesn't like some of the memory operator definitions #ifdef __SALFORDC__ #undef wxUSE_MEMORY_TRACING #define wxUSE_MEMORY_TRACING 0 #undef wxUSE_GLOBAL_MEMORY_OPERATORS #define wxUSE_GLOBAL_MEMORY_OPERATORS 0 #undef wxUSE_DEBUG_NEW_ALWAYS #define wxUSE_DEBUG_NEW_ALWAYS 0 #undef wxUSE_THREADS #define wxUSE_THREADS 0 #undef wxUSE_OWNER_DRAWN #define wxUSE_OWNER_DRAWN 0 #endif #ifdef __TWIN32__ #undef wxUSE_THREADS #define wxUSE_THREADS 0 #undef wxUSE_ODBC #define wxUSE_ODBC 0 #endif // BC++/Win16 can't cope with the amount of data in resource.cpp #if defined(__WIN16__) && defined(__BORLANDC__) #undef wxUSE_WX_RESOURCES #define wxUSE_WX_RESOURCES 0 #undef wxUSE_ODBC #define wxUSE_ODBC 0 #endif #if defined(__WXMSW__) && defined(__WATCOMC__) #undef wxUSE_LIBJPEG #define wxUSE_LIBJPEG 0 #endif #if defined(__WXMSW__) && !defined(__WIN32__) #undef wxUSE_SOCKETS #define wxUSE_SOCKETS 0 #undef wxUSE_THREADS #define wxUSE_THREADS 0 #undef wxUSE_TOOLTIPS #define wxUSE_TOOLTIPS 0 #undef wxUSE_SPINCTRL #define wxUSE_SPINCTRL 0 #undef wxUSE_SPINBTN #define wxUSE_SPINBTN 0 #undef wxUSE_LIBPNG #define wxUSE_LIBPNG 0 #undef wxUSE_LIBJPEG #define wxUSE_LIBJPEG 0 #undef wxUSE_GIF #define wxUSE_GIF 0 #undef wxUSE_PNM #define wxUSE_PNM 0 #undef wxUSE_PCX #define wxUSE_PCX 0 #endif #endif // _WX_SETUP_H_