AuroraMiddleware/wxWidgets
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
a0be434e78
wxWidgets/docs/motif/install.txt
Julian Smart 42280e48f2 Further version changes 
git-svn-id: https://svn.wxwidgets.org/svn/wx/wxWidgets/trunk@18055 c3d73ce0-8a6f-49c7-b76d-6d57e0e08775
2002-12-05 12:14:53 +00:00

525 lines
17 KiB
Plaintext
Raw Blame History

wxWindows 2.5 for Motif installation
------------------------------------
IMPORTANT NOTE:
If you experience problems installing, please re-read these
instructions and other related files (todo.txt, bugs.txt and
osname.txt for your platform if it exists) carefully before
mailing wxwin-users or the author. Preferably, try to fix the
problem first and then send a patch to the author.
When sending bug reports tell us what version of wxWindows you are
using (including the beta) and what compiler on what system. One
example: wxMotif 2.5.0, gcc 2.95.4, Redhat 6.1
First steps
-----------
- Prerequisites: Motif 1.2 or above, or Lesstif. Motif 2.0 and
above may also be suitable.
- Download wxX11-x.y.z.tgz, where x.y.z is the version number.
(wxMotif is included in the wxX11 distribution).
Download documentation in a preferred format, such as
wxWindows-HTML.zip or wxWindows-PDF.zip.
- Make a directory such as ~/wx and unarchive the files into this
directory.
- It is recommended that you install bison and flex; using yacc
and lex may require tweaking of the makefiles. You also need
libXpm (see comments in the Notes section below) if you want to have
XPM support in wxWindows (recommended).
- You can now use configure to build wxWindows and the samples.
Using configure is the recommended way to build the library. If it doesn't
work for you for whatever reason, please report it (together with detailed
information about your platform and the (relevant part of) contents of
config.log file) to wx-dev@lists.wxwindows.org.
COMPILING USING CONFIGURE
=========================
* The simplest case
-------------------
If you compile wxWindows on Linux for the first time and don't like to read
install instructions just do (in the base dir):
> ./configure --with-motif
> make
> su <type root password>
> make install
> ldconfig
> exit
Afterwards you can continue with
> make
> su <type root password>
> make install
> ldconfig
> exit
If you want to remove wxWindows on Unix you can do this:
> su <type root password>
> make uninstall
> ldconfig
> exit
* The expert case
-----------------
If you want to do some more serious cross-platform programming with wxWindows,
such as for GTK and Motif, you can now build two complete libraries and use
them concurrently. For this end, you have to create a directory for each build
of wxWindows - you may also want to create different versions of wxWindows
and test them concurrently. Most typically, this would be a version configured
with --enable-debug_flag and one without. Note, that only one build can
currently be installed, so you'd have to use local version of the library for
that purpose. For building three versions (one GTK, one Motif and a debug
version of the GTK source) you'd do this:
md buildmotif
cd buildmotif
../configure --with-motif
make
cd ..
md buildgtk
cd buildgtk
../configure --with-gtk
make
cd ..
md buildgtkd
cd buildgtkd
../configure --with-gtk --enable-debug_flag
make
cd ..
* The simplest errors
---------------------
You get errors during compilation: The reason is that you probably have a
broken compiler. GCC 2.8 and earlier versions and egcs are likely to cause
problems due to incomplete support for C++ and optimisation bugs. Best to use
GCC 2.95 or later.
You get immediate segfault when starting any sample or application: This is
either due to having compiled the library with different flags or options than
your program - typically you might have the __WXDEBUG__ option set for the
library but not for your program - or due to using a compiler with optimisation
bugs.
* The simplest program
----------------------
Now create your super-application myfoo.app and compile anywhere with
g++ myfoo.cpp `wx-config --libs --cxxflags` -o myfoo
* General
---------
The Unix variants of wxWindows use GNU configure. If you have problems with
your make use GNU make instead.
If you have general problems with installation, see the wxWindows website at
http://www.wxwindows.org/
for newest information. If you still don't have any success, please send a bug
report to one of our mailing lists (see my homepage) INCLUDING A DESCRIPTION OF
YOUR SYSTEM AND YOUR PROBLEM, SUCH AS YOUR VERSION OF MOTIF, WXMOTIF, WHAT
DISTRIBUTION YOU USE AND WHAT ERROR WAS REPORTED. I know this has no effect,
but I tried...
* GUI libraries
---------------
wxWindows/Motif requires the Motif library to be installed on your system. As
an alternative, you may also use the free library "lesstif" which implements
most of the Motif API without the licence restrictions of Motif.
You can get the newest version of the Lesstif from the lesstif homepage at:
http://www.lesstif.org
* Additional libraries
----------------------
wxWindows/Motif requires a thread library and X libraries known to work with
threads. This is the case on all commercial Unix-Variants and all
Linux-Versions that are based on glibc 2 except RedHat 5.0 which is broken in
many aspects. As of writing this, these Linux distributions have correct glibc
2 support:
- RedHat 5.1
- Debian 2.0 and 3.0
- Stampede
- DLD 6.0
- SuSE 6.0
You can disable thread support by running
./configure --disable-threads
make
su <type root password>
make install
ldconfig
exit
* Building wxMotif on OS/2
--------------------------
Please send comments and question about the OS/2 installation
to Andrea Venturoli <a.ventu@flashnet.it> and patches to
the wxWindows mailing list.
You'll need OS/2 Warp (4.00FP#6), X-Free86/2 (3.3.3 or newer),
Lesstif (0.89.1 or newer), emx (0.9d fix 1), flex (2.5.4),
yacc (1.8), unix like shell, e.g. korn shell (5.2.13),
Autoconf (2.13), GNU file utilities (3.6),
GNU text utilities (1.3), GNU shell utilites (1.12), m4 (1.4),
sed (2.05), grep (2.0), Awk (3.0.3), GNU Make (3.76.1).
Open an OS/2 prompt and switch to the directory above.
First set some global environment variables we need:
SET CXXFLAGS=-Zmtd -D__ST_MT_ERRNO__
SET CFLAGS=-Zmtd -D__ST_MT_ERRNO__
SET OSTYPE=OS2X
SET COMSPEC=sh
Notice you can choose whatever you want, if you don't like OS2X.
Now, run autoconf in the main directory and in the samples, demos
and utils subdirectory. This will generate the OS/2 specific
versions of the configure scripts. Now run
configure --with-motif
as described above.
To verify Lesstif installation, configure will try to compile a
sample program that requires X headers/libraries to be either
available via C_INCLUDE_PATH and LIBRARY_PATH or you need to
explicitly set CFLAGS prior to running configure.
If you have pthreads library installed, it will be autodetected
and the library will be compiled with thread-support.
Note that configure assumes your flex will generate files named
"lexyy.c", not "lex.yy.c". If you have a version which does
generate "lex.yy.c", you need to manually change the generated
makefile.
* Building wxMotif on SGI
-------------------------
Using the SGI native compilers, it is recommended that you
also set CFLAGS and CXXFLAGS before running configure. These
should be set to :
CFLAGS="-mips3 -n32"
CXXFLAGS="-mips3 -n32"
This is essential if you want to use the resultant binaries
on any other machine than the one it was compiled on. If you
have a 64bit machine (Octane) you should also do this to ensure
you don't accidently build the libraries as 64bit (which is
untested).
The SGI native compiler support has only been tested on Irix 6.5.
* Create your configuration
---------------------------
Usage:
./configure [options]
If you want to use system's C and C++ compiler,
set environment variables CXX and CC as
% setenv CC cc
% setenv CXX CC
% ./configure options
to see all the options please use:
./configure --help
The basic philosophy is that if you want to use different
configurations, like a debug and a release version,
or use the same source tree on different systems,
you have only to change the environment variable OSTYPE.
(Sadly this variable is not set by default on some systems
in some shells - on SGI's for example). So you will have to
set it there. This variable HAS to be set before starting
configure, so that it knows which system it tries to
configure for.
Configure will complain if the system variable OSTYPE has
not been defined. And Make in some circumstances as well...
* General options
-------------------
Given below are the commands to change the default behaviour,
i.e. if it says "--disable-threads" it means that threads
are enabled by default.
Many of the configure options have been thoroughly tested
in wxWindows snapshot 6, but not yet all (ODBC not).
You have to add --with-motif on platforms, where Motif is
not the default (on Linux, configure will default to GTK).
--with-motif Use either Motif or Lesstif
Configure will look for both.
The following options handle the kind of library you want to build.
--disable-threads Compile without thread support. Threads
support is also required for the
socket code to work.
--disable-shared Do not create shared libraries.
--disable-optimise Do not optimise the code. Can
sometimes be useful for debugging
and is required on some architectures
such as Sun with gcc 2.8.X which
would otherwise produce segvs.
--enable-profile Add profiling info to the object
files. Currently broken, I think.
--enable-no_rtti Enable compilation without creation of
C++ RTTI information in object files.
This will speed-up compilation and reduce
binary size.
--enable-no_exceptions Enable compilation without creation of
C++ exception information in object files.
This will speed-up compilation and reduce
binary size. Also fewer crashes during the
actual compilation...
--enable-no_deps Enable compilation without creation of
dependency information.
--enable-permissive Enable compilation without checking for strict
ANSI conformance. Useful to prevent the build
dying with errors as soon as you compile with
Solaris' ANSI-defying headers.
--enable-mem_tracing Add built-in memory tracing.
--enable-dmalloc Use the dmalloc memory debugger.
Read more at www.letters.com/dmalloc/
--enable-debug_info Add debug info to object files and
executables for use with debuggers
such as gdb (or its many frontends).
--enable-debug_flag Define __DEBUG__ and __WXDEBUG__ when
compiling. This enable wxWindows' very
useful internal debugging tricks (such
as automatically reporting illegal calls)
to work. Note that program and library
must be compiled with the same debug
options.
* Feature Options
-----------------
Many of the configure options have been thoroughly tested
in wxWindows snapshot 6, but not yet all (ODBC not).
When producing an executable that is linked statically with wxGTK
you'll be surprised at its immense size. This can sometimes be
drastically reduced by removing features from wxWindows that
are not used in your program. The most relevant such features
are
--without-libpng Disables PNG image format code.
--without-libjpeg Disables JPEG image format code.
{ --without-odbc Disables ODBC code. Not yet. }
--disable-resources Disables the use of *.wxr type
resources.
--disable-threads Disables threads. Will also
disable sockets.
--disable-sockets Disables sockets.
--disable-dnd Disables Drag'n'Drop.
--disable-clipboard Disables Clipboard.
--disable-serial Disables object instance serialisation.
--disable-streams Disables the wxStream classes.
--disable-file Disables the wxFile class.
--disable-textfile Disables the wxTextFile class.
--disable-intl Disables the internationalisation.
--disable-validators Disables validators.
--disable-accel Disables accel.
Apart from disabling certain features you can very often "strip"
the program of its debugging information resulting in a significant
reduction in size.
* Compiling
-----------
The following must be done in the base directory (e.g. ~/wxMotif
or ~/wxWin or whatever)
Now the makefiles are created (by configure) and you can compile
the library by typing:
make
make yourself some coffee, as it will take some time. On an old
386SX possibly two weeks. During compilation, you'll get a few
warning messages depending in your compiler.
If you want to be more selective, you can change into a specific
directory and type "make" there.
Then you may install the library and its header files under
/usr/local/include/wx and /usr/local/lib respectively. You
have to log in as root (i.e. run "su" and enter the root
password) and type
make install
You can remove any traces of wxWindows by typing
make uninstall
If you want to save disk space by removing unnecessary
object-files:
make clean
in the various directories will do the work for you.
* Creating a new Project
------------------------
1) The first way uses the installed libraries and header files
automatically using wx-config
g++ myfoo.cpp `wx-config --libs` `wx-config --cxxflags` -o myfoo
Using this way, a make file for the minimal sample would look
like this
CXX = g++
minimal: minimal.o
$(CXX) -o minimal minimal.o `wx-config --libs`
minimal.o: minimal.cpp mondrian.xpm
$(CXX) `wx-config --cxxflags` -c minimal.cpp -o minimal.o
clean:
rm -f *.o minimal
This is certain to become the standard way unless we decide
to stick to tmake.
2) The other way creates a project within the source code
directories of wxWindows. For this endeavour, you'll need
GNU autoconf version 2.14 and add an entry to your Makefile.in
to the bottom of the configure.in script and run autoconf
and configure before you can type make.
* Further notes by Julian Smart
---------------------------------
- You may find the following script useful for compiling wxMotif,
especially if installing from zips (which don't preserve file
permissions). Make this script executable with the command
chmod a+x makewxmotif.
-------:x-----Cut here-----:x-----
# makewxmotif
# Sets permissions (in case we extracted wxMotif from zip files)
# and makes wxMotif.
# Call from top-level wxWindows directory.
# Note that this uses standard (but commonly-used) configure options;
# if you're feeling brave, you may wish to compile with threads:
# if they're not supported by the target platform, they will be disabled
# anyhow
# -- Julian Smart
chmod a+x configure config.sub config.guess
./configure --with-shared --with-motif --without-gtk --with-debug_flag --with-debug_info --enable-debug --without-threads --without-sockets --without-odbc
make
-------:x-----Cut here-----:x-----
This script will build wxMotif using shared libraries. If you want to build
a static wxWindows library, use --disable-shared.
Troubleshooting
---------------
- Solaris compilation with gcc: if the compiler has problems with the variable
argument functions, try putting the gcc fixinclude file paths early in the
include path.
- If you operator-related compile errors or strange memory problems
(for example in deletion of string arrays), set wxUSE_GLOBAL_MEMORY_OPERATORS
and wxUSE_MEMORY_TRACING to 0 in setup.h, and recompile.
- If you get an internal compiler error in gcc, turn off optimisations.
- Problems with XtDestroyWidget crashing in ~wxWindow have been
reported on SGI IRIX 6.4. This has not yet been resolved, so
any advice here would be very welcome. See bugs.txt for a
possible temporary workaround (comment out the final
XtDestroyWidget from ~wxWindow in window.cpp).
- Some compilers, such as Sun C++, may give a lot of warnings about
virtual functions being hidden. Please ignore these, it's correct C++ syntax.
If you find any incorrect instances, though, such as a
missing 'const' in an overridden function, please let us know.
Other Notes
-----------
- Debugging mode is switched on by default in the makefiles, but using
configure will create a release build of the library by default: it's
recommended to use --with-debug_info and --with-debug_flag configure
switches while developing your application. To compile in non-debug
mode, remove the -D__WXDEBUG__ switch in make.env (or if using the
configure system, change --with-debug_flag to --without_debug_flag
and --with-debug_info to --without-debug_info in the makewxmotif
script).
Bug reports
-----------
Please send bug reports with a description of your environment,
compiler and the error message(s) to the wxwin-developers mailing list at:
wx-dev@lists.wxwindows.org
Julian Smart, Robert Roebling and Vadim Zeitlin, November 1999.
Reference in New Issue View Git Blame Copy Permalink