zstd/lib/common/fse.h

/* ******************************************************************
   FSE : Finite State Entropy codec
   Public Prototypes declaration
   Copyright (C) 2013-2016, Yann Collet.

   BSD 2-Clause License (http://www.opensource.org/licenses/bsd-license.php)

   Redistribution and use in source and binary forms, with or without
   modification, are permitted provided that the following conditions are
   met:

       * Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer.
       * Redistributions in binary form must reproduce the above
   copyright notice, this list of conditions and the following disclaimer
   in the documentation and/or other materials provided with the
   distribution.

   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

   You can contact the author at :
   - Source repository : https://github.com/Cyan4973/FiniteStateEntropy
****************************************************************** */
#ifndef FSE_H
#define FSE_H

#if defined (__cplusplus)
extern "C" {
#endif


/*-*****************************************
*  Dependencies
******************************************/
#include <stddef.h>    /* size_t, ptrdiff_t */


/*-****************************************
*  FSE simple functions
******************************************/
/*! FSE_compress() :
    Compress content of buffer 'src', of size 'srcSize', into destination buffer 'dst'.
    'dst' buffer must be already allocated. Compression runs faster is dstCapacity >= FSE_compressBound(srcSize).
    @return : size of compressed data (<= dstCapacity).
    Special values : if return == 0, srcData is not compressible => Nothing is stored within dst !!!
                     if return == 1, srcData is a single byte symbol * srcSize times. Use RLE compression instead.
                     if FSE_isError(return), compression failed (more details using FSE_getErrorName())
*/
size_t FSE_compress(void* dst, size_t dstCapacity,
              const void* src, size_t srcSize);

/*! FSE_decompress():
    Decompress FSE data from buffer 'cSrc', of size 'cSrcSize',
    into already allocated destination buffer 'dst', of size 'dstCapacity'.
    @return : size of regenerated data (<= maxDstSize),
              or an error code, which can be tested using FSE_isError() .

    ** Important ** : FSE_decompress() does not decompress non-compressible nor RLE data !!!
    Why ? : making this distinction requires a header.
    Header management is intentionally delegated to the user layer, which can better manage special cases.
*/
size_t FSE_decompress(void* dst,  size_t dstCapacity,
                const void* cSrc, size_t cSrcSize);


/*-*****************************************
*  Tool functions
******************************************/
size_t FSE_compressBound(size_t size);       /* maximum compressed size */

/* Error Management */
unsigned    FSE_isError(size_t code);        /* tells if a return value is an error code */
const char* FSE_getErrorName(size_t code);   /* provides error code string (useful for debugging) */


/*-*****************************************
*  FSE advanced functions
******************************************/
/*! FSE_compress2() :
    Same as FSE_compress(), but allows the selection of 'maxSymbolValue' and 'tableLog'
    Both parameters can be defined as '0' to mean : use default value
    @return : size of compressed data
    Special values : if return == 0, srcData is not compressible => Nothing is stored within cSrc !!!
                     if return == 1, srcData is a single byte symbol * srcSize times. Use RLE compression.
                     if FSE_isError(return), it's an error code.
*/
size_t FSE_compress2 (void* dst, size_t dstSize, const void* src, size_t srcSize, unsigned maxSymbolValue, unsigned tableLog);


/*-*****************************************
*  FSE detailed API
******************************************/
/*!
FSE_compress() does the following:
1. count symbol occurrence from source[] into table count[]
2. normalize counters so that sum(count[]) == Power_of_2 (2^tableLog)
3. save normalized counters to memory buffer using writeNCount()
4. build encoding table 'CTable' from normalized counters
5. encode the data stream using encoding table 'CTable'

FSE_decompress() does the following:
1. read normalized counters with readNCount()
2. build decoding table 'DTable' from normalized counters
3. decode the data stream using decoding table 'DTable'

The following API allows targeting specific sub-functions for advanced tasks.
For example, it's possible to compress several blocks using the same 'CTable',
or to save and provide normalized distribution using external method.
*/

/* *** COMPRESSION *** */

/*! FSE_count():
    Provides the precise count of each byte within a table 'count'.
    'count' is a table of unsigned int, of minimum size (*maxSymbolValuePtr+1).
    *maxSymbolValuePtr will be updated if detected smaller than initial value.
    @return : the count of the most frequent symbol (which is not identified).
              if return == srcSize, there is only one symbol.
              Can also return an error code, which can be tested with FSE_isError(). */
size_t FSE_count(unsigned* count, unsigned* maxSymbolValuePtr, const void* src, size_t srcSize);

/*! FSE_optimalTableLog():
    dynamically downsize 'tableLog' when conditions are met.
    It saves CPU time, by using smaller tables, while preserving or even improving compression ratio.
    @return : recommended tableLog (necessarily <= initial 'tableLog') */
unsigned FSE_optimalTableLog(unsigned tableLog, size_t srcSize, unsigned maxSymbolValue);

/*! FSE_normalizeCount():
    normalize counts so that sum(count[]) == Power_of_2 (2^tableLog)
    'normalizedCounter' is a table of short, of minimum size (maxSymbolValue+1).
    @return : tableLog,
              or an errorCode, which can be tested using FSE_isError() */
size_t FSE_normalizeCount(short* normalizedCounter, unsigned tableLog, const unsigned* count, size_t srcSize, unsigned maxSymbolValue);

/*! FSE_NCountWriteBound():
    Provides the maximum possible size of an FSE normalized table, given 'maxSymbolValue' and 'tableLog'.
    Typically useful for allocation purpose. */
size_t FSE_NCountWriteBound(unsigned maxSymbolValue, unsigned tableLog);

/*! FSE_writeNCount():
    Compactly save 'normalizedCounter' into 'buffer'.
    @return : size of the compressed table,
              or an errorCode, which can be tested using FSE_isError(). */
size_t FSE_writeNCount (void* buffer, size_t bufferSize, const short* normalizedCounter, unsigned maxSymbolValue, unsigned tableLog);


/*! Constructor and Destructor of FSE_CTable.
    Note that FSE_CTable size depends on 'tableLog' and 'maxSymbolValue' */
typedef unsigned FSE_CTable;   /* don't allocate that. It's only meant to be more restrictive than void* */
FSE_CTable* FSE_createCTable (unsigned tableLog, unsigned maxSymbolValue);
void        FSE_freeCTable (FSE_CTable* ct);

/*! FSE_buildCTable():
    Builds `ct`, which must be already allocated, using FSE_createCTable().
    @return : 0, or an errorCode, which can be tested using FSE_isError() */
size_t FSE_buildCTable(FSE_CTable* ct, const short* normalizedCounter, unsigned maxSymbolValue, unsigned tableLog);

/*! FSE_compress_usingCTable():
    Compress `src` using `ct` into `dst` which must be already allocated.
    @return : size of compressed data (<= `dstCapacity`),
              or 0 if compressed data could not fit into `dst`,
              or an errorCode, which can be tested using FSE_isError() */
size_t FSE_compress_usingCTable (void* dst, size_t dstCapacity, const void* src, size_t srcSize, const FSE_CTable* ct);

/*!
Tutorial :
----------
The first step is to count all symbols. FSE_count() does this job very fast.
Result will be saved into 'count', a table of unsigned int, which must be already allocated, and have 'maxSymbolValuePtr[0]+1' cells.
'src' is a table of bytes of size 'srcSize'. All values within 'src' MUST be <= maxSymbolValuePtr[0]
maxSymbolValuePtr[0] will be updated, with its real value (necessarily <= original value)
FSE_count() will return the number of occurrence of the most frequent symbol.
This can be used to know if there is a single symbol within 'src', and to quickly evaluate its compressibility.
If there is an error, the function will return an ErrorCode (which can be tested using FSE_isError()).

The next step is to normalize the frequencies.
FSE_normalizeCount() will ensure that sum of frequencies is == 2 ^'tableLog'.
It also guarantees a minimum of 1 to any Symbol with frequency >= 1.
You can use 'tableLog'==0 to mean "use default tableLog value".
If you are unsure of which tableLog value to use, you can ask FSE_optimalTableLog(),
which will provide the optimal valid tableLog given sourceSize, maxSymbolValue, and a user-defined maximum (0 means "default").

The result of FSE_normalizeCount() will be saved into a table,
called 'normalizedCounter', which is a table of signed short.
'normalizedCounter' must be already allocated, and have at least 'maxSymbolValue+1' cells.
The return value is tableLog if everything proceeded as expected.
It is 0 if there is a single symbol within distribution.
If there is an error (ex: invalid tableLog value), the function will return an ErrorCode (which can be tested using FSE_isError()).

'normalizedCounter' can be saved in a compact manner to a memory area using FSE_writeNCount().
'buffer' must be already allocated.
For guaranteed success, buffer size must be at least FSE_headerBound().
The result of the function is the number of bytes written into 'buffer'.
If there is an error, the function will return an ErrorCode (which can be tested using FSE_isError(); ex : buffer size too small).

'normalizedCounter' can then be used to create the compression table 'CTable'.
The space required by 'CTable' must be already allocated, using FSE_createCTable().
You can then use FSE_buildCTable() to fill 'CTable'.
If there is an error, both functions will return an ErrorCode (which can be tested using FSE_isError()).

'CTable' can then be used to compress 'src', with FSE_compress_usingCTable().
Similar to FSE_count(), the convention is that 'src' is assumed to be a table of char of size 'srcSize'
The function returns the size of compressed data (without header), necessarily <= `dstCapacity`.
If it returns '0', compressed data could not fit into 'dst'.
If there is an error, the function will return an ErrorCode (which can be tested using FSE_isError()).
*/


/* *** DECOMPRESSION *** */

/*! FSE_readNCount():
    Read compactly saved 'normalizedCounter' from 'rBuffer'.
    @return : size read from 'rBuffer',
              or an errorCode, which can be tested using FSE_isError().
              maxSymbolValuePtr[0] and tableLogPtr[0] will also be updated with their respective values */
size_t FSE_readNCount (short* normalizedCounter, unsigned* maxSymbolValuePtr, unsigned* tableLogPtr, const void* rBuffer, size_t rBuffSize);

/*! Constructor and Destructor of FSE_DTable.
    Note that its size depends on 'tableLog' */
typedef unsigned FSE_DTable;   /* don't allocate that. It's just a way to be more restrictive than void* */
FSE_DTable* FSE_createDTable(unsigned tableLog);
void        FSE_freeDTable(FSE_DTable* dt);

/*! FSE_buildDTable():
    Builds 'dt', which must be already allocated, using FSE_createDTable().
    return : 0, or an errorCode, which can be tested using FSE_isError() */
size_t FSE_buildDTable (FSE_DTable* dt, const short* normalizedCounter, unsigned maxSymbolValue, unsigned tableLog);

/*! FSE_decompress_usingDTable():
    Decompress compressed source `cSrc` of size `cSrcSize` using `dt`
    into `dst` which must be already allocated.
    @return : size of regenerated data (necessarily <= `dstCapacity`),
              or an errorCode, which can be tested using FSE_isError() */
size_t FSE_decompress_usingDTable(void* dst, size_t dstCapacity, const void* cSrc, size_t cSrcSize, const FSE_DTable* dt);

/*!
Tutorial :
----------
(Note : these functions only decompress FSE-compressed blocks.
 If block is uncompressed, use memcpy() instead
 If block is a single repeated byte, use memset() instead )

The first step is to obtain the normalized frequencies of symbols.
This can be performed by FSE_readNCount() if it was saved using FSE_writeNCount().
'normalizedCounter' must be already allocated, and have at least 'maxSymbolValuePtr[0]+1' cells of signed short.
In practice, that means it's necessary to know 'maxSymbolValue' beforehand,
or size the table to handle worst case situations (typically 256).
FSE_readNCount() will provide 'tableLog' and 'maxSymbolValue'.
The result of FSE_readNCount() is the number of bytes read from 'rBuffer'.
Note that 'rBufferSize' must be at least 4 bytes, even if useful information is less than that.
If there is an error, the function will return an error code, which can be tested using FSE_isError().

The next step is to build the decompression tables 'FSE_DTable' from 'normalizedCounter'.
This is performed by the function FSE_buildDTable().
The space required by 'FSE_DTable' must be already allocated using FSE_createDTable().
If there is an error, the function will return an error code, which can be tested using FSE_isError().

`FSE_DTable` can then be used to decompress `cSrc`, with FSE_decompress_usingDTable().
`cSrcSize` must be strictly correct, otherwise decompression will fail.
FSE_decompress_usingDTable() result will tell how many bytes were regenerated (<=`dstCapacity`).
If there is an error, the function will return an error code, which can be tested using FSE_isError(). (ex: dst buffer too small)
*/


#if defined (__cplusplus)
}
#endif

#endif  /* FSE_H */