Seperate syntheticTest and fileTableTest (now renamed as benchFiles)
Add incremental display to benchMem
Change to only iterMode for benchFunction
Make Synthetic test's compressibility configurable from cli (using -P#)
In the new advanced API, adjust the parameters even if they are explicitly
set. This mainly applies to the `windowLog`, and accordingly the `hashLog`
and `chainLog`, when the source size is known.
-Remove global variables
-Remove gv setting functions
-Add advancedParams struct
-Add defaultAdvancedParams();
-Change return type of bench Files
-Change cli to use new interface
-Changed error returns to own struct value
-Change default compression benchmark to use decompress_generic
-Add CustomBench function
-Add Documentation for new functions
IS_CONSOLE stolen wholesale from Options.cpp
not sure if i should have extracted that code for DRY-ness
tested in OSX and functionality seems appropriate
unstested in a windows environment
unistd.h is for unix standard tools.
There does not appear to be a simple isatty for windows
this we only run the logic and header include in
non-windows environments
FIO would keep presenting data after an LZ4F decoding error
resulting in a NULL pointer dereference
when associated with older liblz4 version (< v1.8.1.2)
this makes it possible to specify extremely large negative compression levels,
achieving the side effect as "no compression".
It will also be possible to define larger targetlength for ultra compression mode.
There is no adverse side effect due to removing this limit.
* Replaced a non-breaking space and an en dash with a plain space and
a hyphen.
* This means the files are simple ASCII and less likely to run into
codepage issues.
- do not test level 0, as it is converted into level 3,
which feels strange when compressing multiple levels
- Use direct synchronous mode when a single worker is requested.
access negative compression levels from command line
for both compression and benchmark modes.
also : ensure proper propagation of parameters
through ZSTD_compress_generic() interface.
added relevant cli tests.
zstd bench module can focus on decompression speed _only_.
This is useful when trying to measure performance
on large input data compressed using a high level
as compression time becomes problematic (too long).
This mode is triggered by command : zstd -b -d
Problem was : in such a mode,
measured decoding speed was > 10% slower
than in nominal mode (compression + decompression),
making decompression benchmark mode much less useful.
This patch fixes the issue.
It's not completely clear why, but
moving the `memcpy()` operation sooner in the pipeline fixed it.
I can still measure some difference, but it is in the < 2% range,
so it's much more tolerable.
also : it doesn't matter anymore in which order are selected
commands `-b` and `-d`.
The combination always triggers bench_decodeOnly mode.
Silence a Coverity warning about 'windowSize' being uninitialized.
(Yes, nothing that calls this routine actually uses the windowSize
value. Still, appeasing Coverity is pretty harmless in this case.)
by invoking time() once per batch, instead of once per compression / decompression.
Batch is dynamically resized so that each round lasts approximately 1 second.
Also : increases time accuracy to nanosecond
This makes it easier to explain that nbWorkers=0 --> single-threaded mode,
while nbWorkers=1 --> asynchronous mode (one mode thread on top of the "main" caller thread).
No need for an additional asynchronous mode flag.
nbWorkers>=2 works the same as nbThreads>=2 previously.
added some test
also updated relevant doc
+ fixed a mistake in `lz4` symlink support :
lz4 utility doesn't remove source files by default (like zstd, but unlike gzip).
The symlink must behave the same.
Produces 3 statistics for ongoing frame compression :
- ingested
- consumed (effectively compressed)
- produced
Ingested can be larger than consumed due to buffering effect.
For the time being, this patch mostly fixes the % ratio issue,
since it computes consumed / produced,
instead of ingested / produced.
That being said, update is not "smooth",
because on a slow enough setting,
fileio spends most of its time waiting for a worker to complete its job.
This could be improved thanks to more granular flushing
i.e. start flushing before ongoing job is fully completed.
this happened on 32-bits build when requiring a too large input buffer,
typically on wlog=29, creating jobs of 2 GB size.
also : zstd32 now compiles with multithread support enabled by default
(can be disabled with HAVE_THREAD=0)
The compression % is no longer correct,
since it's no longer possible to make direct correlation
between nb bytes read and nb bytes written
due to large internal buffer inside CCtx
(exacerbated with --long).
The current "fix" is to no longer display the %.
A more complex solution will have to count exactly how much data has been consumed and compressed internally, within CCtx buffers.
when cli is compiled without MT support,
invoking ZSTD_p_nonBlockingMode result in an error code.
This patch only sets ZSTD_p_nonBlockingMode when ZSTD_MULTITHREAD is set, meaning there is MT support.
The error code could also be intentionnally ignored (there is no side effect).
This new parameter makes it possible to call
streaming ZSTDMT with a single thread set
which is non blocking.
It makes it possible for the main thread to do other tasks in parallel
while the worker thread does compression.
Typically, for zstd cli, it means it can do I/O stuff.
Applied within fileio.c, this patch provides non-negligible gains during compression.
Tested on my laptop, with enwik9 (1000000000 bytes) : time zstd -f enwik9
With traditional single-thread blocking mode :
real 0m9.557s
user 0m8.861s
sys 0m0.538s
With new single-worker non blocking mode :
real 0m7.938s
user 0m8.049s
sys 0m0.514s
=> 20% faster
This fixes the following crash:
$ touch exists
$ programs/zstd -r examples/ -o exists
zstd: exists already exists; not overwritten
Segmentation fault (core dumped)
* programs/fileio.c (FIO_compressMultipleFilenames):
Handle the case where we're not overwriting the destination.
Reported at https://bugzilla.redhat.com/1530049
This patch restores capability for each file to receive adapted compression parameters depending on its size.
The bug breaking this feature was relatively silly :
setting a parameter with a value "0" is supposed to be a no-op.
Unfortunately, it would pin down compression parameters as if they were manually set,
preventing later automatic adaptation.
Unfortunately, I'm currently short of a test case that could check this situation and trigger an error.
Compression parameters selection between tableID 0,1,2,3 is largely internal,
leaving no trace to outside world, not even in frame header.
The new macro might be a bit too restrictive.
Systems which do not support new test will simply default to <time.h>'s `clock_t clock()`,
suffering lesser benchmark accuracy.
Should it matter, the detection macro will have to be upgraded.
There was a flaw in the formula
which compared literal cost with match cost :
at a given position,
a non-null literal suite is going to be part of next sequence,
while if position ends a previous match, to immediately start another match,
next sequence will have a litlength of zero.
A litlength of zero has a non-null cost.
It follows that literals cost should be compared to match cost + litlength==0.
Not doing so gave a structural advantage to matches, which would be selected more often.
I believe that's what led to the creation of the strange heuristic which added a complex cost to matches.
The heuristic was actually compensating.
It was probably created through multiple trials, settling for best outcome on a given scenario (I suspect silesia.tar).
The problem with this heuristic is that it's hard to understand,
and unfortunately, any future change in the parser would impact the way it should be calculated and its effects.
The "proper" formula makes it possible to remove this heuristic.
Now, the problem is : in a head to head comparison, it's sometimes better, sometimes worse.
Note that all differences are small (< 0.01 ratio).
In general, the newer formula is better for smaller files (for example, calgary.tar and enwik7).
I suspect that's because starting statistics are pretty poor (another area of improvement).
However, for silesia.tar specifically, it's worse at level 22 (while being better at level 17, so even compression level has an impact ...).
It's a pity that zstd -22 gets worse on silesia.tar.
That being said, I like that the new code gets rid of strange variables,
which were introducing complexity for any future evolution (faster variants being in mind).
Therefore, in spite of this detrimental side effect, I tend to be in favor of it.
Fixes issue where, when `zstd --format=lz4` is fed an input larger than 128KB,
the read overruns the input buffer. This changes Zstd to use LZ4 with chained
64KB blocks. This is technically a breaking change in that some third party
LZ4 implementations may not support linked blocks. However, progress should not
be allowed to be stopped by such petty concerns as backwards compatibility!
adapt accuracy depending on value.
makes it possible to have higher accuracy for small value,
notably small compression speed.
This capability is expected to be useful while modifying optimal parser.
Currently, all files are joined by default,
they are compressed separately but benchmarked together,
providing a single final result.
Benchmarking files separately make it possible to accurately measure difference for each file.
This is expected to be useful while tuning optimal parser.
this version has same speed as branch `opt`
which is itself 5-10% slower than branch `dev`
(no identified reason)
It does not compress exactly the same as `opt` or `dev`,
maybe because it doesn't stop search after repcodes,
leading to sometimes better compression, sometimes worse
(by a small margin).
warning : _extDict path does not work for the time being
This means that benchmark module works,
but file module will fail with large files (and high compression level).
Objective is to fuse _extDict path into current one,
in order to have a single parser to maintain.
as per documentation, on ZSTD_setPledgedSrcSize() :
> If all data is provided and consumed in a single round,
> this value (pledgedSrcSize) is overriden by srcSize instead.
This wasn't applied before compression level is transformed into compression parameters.
As a consequence, small input missed compression parameters adaptation.
It seems to work fine now : compression was compared with ZSTD_compress_advanced(),
results were the same.
we lose a warning message :
when a job size is chosen < minimum job size for multithreading,
it is automatically resized to minimum size.
If this information is really useful, it should be present in zstd.h now.
removed the other 2 code paths (single thread, and ZSTDMT ones)
keeping only the new advanced API, for easier code coverage.
It shall also fix identified issue with Visual Studio
which doesn't have ZSTD_NEWAPI defined.
UTIL_getFileSize() used to return zero on failure.
This made it impossible to distinguish a failure from a genuine empty file.
Both cases where coalesced.
Adding UTIL_FILESIZE_UNKNOWN constant has many consequences on user code,
since in many places, the `0` was assumed to mean "error".
This is no longer the case, and the error code must be actively checked.
It was multiple reasons stacked :
- Visual use a different code path, because ZSTD_NEWAPI is not defined
- fileio.c sends `0` as `pledgedSrcSize` to mean `ZSTD_CONTENTSIZE_UNKNOWN` (fixed)
- ZSTDMT_resetCCtx() interpreted `0` as "empty" instead of "unknown" (fixed)
when determining compression parameters
to compress one file only.
For multiple files, it still "bets" that files are going to be small.
There was also a bug recently added in ZSTD_CCtx_loadDictionary_advanced()
making it incapable to use pledgedSrcSize to determine compression parameters.
