this makes it possible to specify extremely large negative compression levels,
achieving the side effect as "no compression".
It will also be possible to define larger targetlength for ultra compression mode.
There is no adverse side effect due to removing this limit.
access negative compression levels from command line
for both compression and benchmark modes.
also : ensure proper propagation of parameters
through ZSTD_compress_generic() interface.
added relevant cli tests.
negative compression level trade compression ratio for more compression speed.
They turn off huffman compression of literals,
and use row 0 as baseline with a stepSize = -cLevel.
added associated test in fuzzer
also added : new advanced parameter ZSTD_p_literalCompression
This makes it easier to explain that nbWorkers=0 --> single-threaded mode,
while nbWorkers=1 --> asynchronous mode (one mode thread on top of the "main" caller thread).
No need for an additional asynchronous mode flag.
nbWorkers>=2 works the same as nbThreads>=2 previously.
to avoid confusion with blocks.
also:
- jobs are cut into chunks of 512KB now, to reduce nb of mutex calls.
- fix function declaration ZSTD_getBlockSizeMax()
- fix outdated comment
When ZSTD_e_end directive is provided,
the question is not only "are internal buffers completely flushed",
it is also "is current frame completed".
In some rare cases,
it was possible for internal buffers to be completely flushed,
triggering a @return == 0,
but frame was not completed as it needed a last null-size block to mark the end,
resulting in an unfinished frame.
Produces 3 statistics for ongoing frame compression :
- ingested
- consumed (effectively compressed)
- produced
Ingested can be larger than consumed due to buffering effect.
For the time being, this patch mostly fixes the % ratio issue,
since it computes consumed / produced,
instead of ingested / produced.
That being said, update is not "smooth",
because on a slow enough setting,
fileio spends most of its time waiting for a worker to complete its job.
This could be improved thanks to more granular flushing
i.e. start flushing before ongoing job is fully completed.
ZSTD_create?Dict() is required to produce a ?Dict* return type
because `free()` does not accept a `const type*` argument.
If it wasn't for this restriction, I would have preferred to create a `const ?Dict*` object
to emphasize the fact that, once created, a dictionary never changes
(hence can be shared concurrently until the end of its lifetime).
There is no such limitation with initStatic?Dict() :
as stated in the doc, there is no corresponding free() function,
since `workspace` is provided, hence allocated, externally,
it can only be free() externally.
Which means, ZSTD_initStatic?Dict() can return a `const ZSTD_?Dict*` pointer.
Tested with `make all`, to catch initStatic's users,
which, incidentally, also updated zstd.h documentation.
This new parameter makes it possible to call
streaming ZSTDMT with a single thread set
which is non blocking.
It makes it possible for the main thread to do other tasks in parallel
while the worker thread does compression.
Typically, for zstd cli, it means it can do I/O stuff.
Applied within fileio.c, this patch provides non-negligible gains during compression.
Tested on my laptop, with enwik9 (1000000000 bytes) : time zstd -f enwik9
With traditional single-thread blocking mode :
real 0m9.557s
user 0m8.861s
sys 0m0.538s
With new single-worker non blocking mode :
real 0m7.938s
user 0m8.049s
sys 0m0.514s
=> 20% faster
constants in zstd.h should not depend on MIN() macro which existence is not guaranteed.
Added a test to check the specific constants.
The test is a bit too specific.
But I have found no way to control a more generic "are all macro already defined" condition,
especially as this is a valid construction (the missing macro might be defined later, intentionnally).
in a new "custom memory allocator" paragraph
which is itself part of "memory management" category.
This makes it simpler to see the relation between the type and its usages.
ZSTD_updateTree() expected to be followed by a Bt match finder, which would update zc->nextToUpdate.
With the new optimal match finder, it's not necessarily the case : a match might be found during repcode or hash3, and stops there because it reaches sufficient_len, without even entering the binary tree.
Previous policy was to nonetheless update zc->nextToUpdate, but the current position would not be inserted, creating "holes" in the btree, aka positions that will no longer be searched.
Now, when current position is not inserted, zc->nextToUpdate is not update, expecting ZSTD_updateTree() to fill the tree later on.
Solution selected is that ZSTD_updateTree() takes care of properly setting zc->nextToUpdate,
so that it no longer depends on a future function to do this job.
It took time to get there, as the issue started with a memory sanitizer error.
The pb would have been easier to spot with a proper `assert()`.
So this patch add a few of them.
Additionnally, I discovered that `make test` does not enable `assert()` during CLI tests.
This patch enables them.
Unfortunately, these `assert()` triggered other (unrelated) bugs during CLI tests, mostly within zstdmt.
So this patch also fixes them.
- Changed packed structure for gcc memory access : memory sanitizer would complain that a read "might" reach out-of-bound position on the ground that the `union` is larger than the type accessed.
Now, to avoid this issue, each type is independent.
- ZSTD_CCtxParams_setParameter() : @return provides the value of parameter, clamped/fixed appropriately.
- ZSTDMT : changed constant name to ZSTDMT_JOBSIZE_MIN
- ZSTDMT : multithreading is automatically disabled when srcSize <= ZSTDMT_JOBSIZE_MIN, since only one thread will be used in this case (saves memory and runtime).
- ZSTDMT : nbThreads is automatically clamped on setting the value.
it was invoking ZSTD_initCStream_advanced() with pledgedSrcSize==0 and contentSizeFlag=1
which means "empty"
while the intention was to mean "unknown".
The contentSizeFlag==1 is new, it is a consequence of setting this value to 1 by default.
The solution selected here is to pass ZSTD_CONTENTSIZE_UNKNOWN to mean "unknown".
So contentSizeFlag remains set (it wasn't in previous versions).
to mean "pledgedSrcSize is not known at init time" instead of `0`.
Note that, a few prototypes created and documented with `0` to mean "unknown" still interpret "0" as unknown,
to avoid breaking 3rd party applications which depend on this behavior.
But this value is no longer recommended to mean "unknown".
In some future version, it might be possible to switch "0" to mean "empty",
as is already the case for several prototypes.
The advantage is that pledgedSrcSize field would have same behavior accross entire API,
making it easier to reason about.
Note that all concerned prototypes belong to the "experimental" API section.
srcSize is controlled at end of compression,
so if someone uses "0" to mean "unknown" while it effectively means "empty",
this is immediately caught by the compression function, which generates an error code : ZSTD_ERROR_srcSize_wrong
ZSTD_compressBound() works fine, but is only useful for dynamic allocation.
For static allocation, only a macro can provide the amount during compilation time.
It would previously exit when srcSize is unknown.
But in the case of custom parameters,
hLog and cLog can still be too large in comparison with windowLog.
Reduces maximum memory allocated during zstreamtest --newapi
* Maximum window size in 32-bit mode is 1GB, since allocations for 2GB fail
on my Mac.
* Maximum window size in 64-bit mode is 2GB, since that is the largest
power of 2 that works with the overflow prevention.
* Allow `--long=windowLog` to set the window log, along with
`--zstd=wlog=#`. These options also set the window size during
decompression, but don't override `--memory=#` if it is set.
* Present a helpful error message when the window size is too large during
decompression.
* The long range matcher defaults to a hash log 7 less than the window log,
which keeps it at 20 for window log 27.
* Keep the default long range matcher window size and the default maximum
window size at 27 for the API and CLI.
* Add tests that use the maximum window size and hash size for compression
and decompression.
supporting function for bufferless streaming API (ZSTD_decompressContinue())
makes it possible to correctly size a round buffer for decoding using this API.
also : added field blockSizeMax within ZSTD_frameHeader,
as it's a necessary information to know when to restart at beginning of decoding buffer.
Makes frame type (zstd,skippable) detection more straighforward.
ZSTD_getFrameHeader set frameContentSize=ZSTD_CONTENTSIZE_UNKNOWN to mean "field not present"
ZSTD_estimateCDictSize() now uses same arguments as ZSTD_createCDict()
ZSTD_estimateCDictSize_advanced() uses same arguments as ZSTD_createCDict_advanced()
ZSTD_estimateCCtx() is now a "simple" function,
taking int compressionLevel as single argument.
ZSTD_estimateCCtx_advanced() takes a CParams argument,
which is both more complete and more complex to generate.
They are now the same object.
It's recommended to keep both types in source code
as previous versions of library (<v1.3.0)
still need this differentiation.
* upstream/dev: (305 commits)
added test for ZSTD_estimateCStreamSize()
changed variable name, for clarity
fixed ZSTD_estimateCStreamSize()
shortened ZSTD_createCStream_Advanced()
fixed symbols test
added ZSTD_estimateDStreamSize()
changed name frameParams into frameHeader
regroup memory usage function declarations
separated ZSTD_estimateCStreamSize() from ZSTD_estimateCCtxSize()
bumped version number
added ZSTD_estimateCDictSize() and ZSTD_estimateDDictSize()
Updated ZSTD_freeCCtx()
updated ZSTD_estimateCCtxSize()
Updated ZSTD_sizeof_CCtx()
merged CCtx and CStream as a single same object
cli : -d and -t do not stop after a failed decompression
added dev branch CircleCI badge
added dev branch Appveyor badge
keep dev branch status only
creates a binary archive without the `programs` directory
...
ZSTD_frameParams => ZSTD_frameHeader
ZSTD_getFrameParams() -> ZSTD_getFrameHeader()
The new naming is more distinctive from ZSTD_frameParameters,
which is used during compression.
ZSTD_frameHeader is clearer in its intention to described frame header content.
It also implies we are decoding a ZSTD frame, hence we are at decoding stage.
added a parameter streaming,
to estimate memory allocation size
when the CCtx is used for streaming (CStream).
Note : this function is not able to estimate
memory cost of a potential internal CDict
which can only happen when starting with ZSTD_initCStream_usingDict()
It now only uses compressionParameters as argument.
It produces many changes throughout user code,
though hopefully they tend to be simple :
just provide the cParams part from existing ZSTD_parameters.
Some programs might depend on ZSTD_createCDict_advanced() to pass frame parameters.
This change will force them to revisit this strategy and fix it,
since frame parameters are effectively silently ignored in current version.
There used to be a (very small) chance that
loading prefix from previous segment
would be confused with a real zstd dictionary.
For that to happen, the prefix needs to start
with the same value as dictionary magic.
That's 1 chance in 4 billions if all values have equal probability.
But in fact, since some values are more common (0x00000000 for example)
others are less common, and dictionary magic was selected to be one of them,
so probabilities are likely even lower.
Anyway, this risk is no down to zero
by adding a new CCtx parameter : ZSTD_p_forceRawDict
Current parameter policy : the parameter "stick" to its CCtx,
so any dictionary loading after ZSTD_p_forceRawDict is set
will be loaded in "raw" ("content only") mode,
even if CCtx is re-used multiple times with multiple different dictionary.
It's up to the user to reset this value differently if it needs so.
- Add ZSTD_findDecompressedSize
- Traverses multiple frames to find total output size
- Add ZSTD_getFrameContentSize
- Gets the decompressed size of a single frame by reading header
- Deprecate ZSTD_getDecompressedSize
Like ZSTD_initCStream_usingDict(),
ZSTDMT_initCStream_usingDict() now keep a copy of dict internally.
This way, dict can be released :
it does not longer have to outlive all future compression sessions.
The new strategy involves cutting frame at block level.
The result is a single frame, preserving ZSTD_getDecompressedSize()
As a consequence, bench can now make a full round-trip,
since the result is compatible with ZSTD_decompress().
This strategy will not make it possible to decode the frame with multiple threads
since the exact cut between independent blocks is not known.
MT decoding needs further discussions.
