\"
\" zstd.1: This is a manual page for 'zstd' program. This file is part of the
\" zstd <http://www.zstd.net/> project.
\" Author: Yann Collet
\"

\" No hyphenation
.hy 0
.nr HY 0

.TH zstd "1" "2015-08-22" "zstd" "User Commands"
.SH NAME
\fBzstd, unzstd, zstdcat\fR - Compress or decompress .zst files

.SH SYNOPSIS
.TP 5
\fBzstd\fR [\fBOPTIONS\fR] [-|INPUT-FILE] [-o <OUTPUT-FILE>]
.PP
.B unzstd
is equivalent to
.BR "zstd \-d"
.br
.B zstdcat
is equivalent to
.BR "zstd \-dcf"
.br

.SH DESCRIPTION
.PP
\fBzstd\fR is a fast lossless compression algorithm
and data compression tool,
with command line syntax similar to \fB gzip (1) \fR and \fB xz (1) \fR .
It is based on the \fBLZ77\fR family, with further FSE & huff0 entropy stages.
\fBzstd\fR offers highly configurable compression speed,
with fast modes at > 200 MB/s per core,
and strong modes nearing lzma compression ratios.
It also features a very fast decoder, with speeds > 500 MB/s per core.

\fBzstd\fR command line syntax is generally similar to gzip,
but features the following differences :
 - Source files are preserved by default.
   It's possible to remove them automatically by using \fB--rm\fR command.
 - When compressing a single file, \fBzstd\fR displays progress notifications and result summary by default.
   Use \fB-q\fR to turn them off

.PP
.B zstd
compresses or decompresses each
.I file
according to the selected operation mode.
If no
.I files
are given or
.I file
is
.BR \- ,
.B zstd
reads from standard input and writes the processed data
to standard output.
.B zstd
will refuse (display an error and skip the
.IR file )
to write compressed data to standard output if it is a terminal.
Similarly,
.B zstd
will refuse to read compressed data
from standard input if it is a terminal.

.PP
Unless
.B \-\-stdout
or
.B \-o
is specified,
.I files
are written to a new file whose name is derived from the source
.I file
name:
.IP \(bu 3
When compressing, the suffix
.B .zst
is appended to the source filename to get the target filename.
.IP \(bu 3
When decompressing, the
.B .zst
suffix is removed from the filename to get the target filename.

.SS "Concatenation with .zst files"
It is possible to concatenate
.B .zst
files as is.
.B zstd
will decompress such files as if they were a single
.B .zst
file.



.SH OPTIONS

.
.SS "Integer suffixes and special values"
In most places where an integer argument is expected,
an optional suffix is supported to easily indicate large integers.
There must be no space between the integer and the suffix.
.TP
.B KiB
Multiply the integer by 1,024 (2^10).
.BR Ki ,
.BR K ,
and
.B KB
are accepted as synonyms for
.BR KiB .
.TP
.B MiB
Multiply the integer by 1,048,576 (2^20).
.BR Mi ,
.BR M ,
and
.B MB
are accepted as synonyms for
.BR MiB .

.
.SS "Operation mode"
If multiple operation mode options are given,
the last one takes effect.
.TP
.BR \-z ", " \-\-compress
Compress.
This is the default operation mode when no operation mode option
is specified and no other operation mode is implied from
the command name (for example,
.B unzstd
implies
.BR \-\-decompress ).
.TP
.BR \-d ", " \-\-decompress ", " \-\-uncompress
Decompress.
.TP
.BR \-t ", " \-\-test
Test the integrity of compressed
.IR files .
This option is equivalent to
.B "\-\-decompress \-\-stdout"
except that the decompressed data is discarded instead of being
written to standard output.
No files are created or removed.
.TP
.B \-b#
 benchmark file(s) using compression level #
.TP
.B \--train FILEs
 use FILEs as training set to create a dictionary. The training set should contain a lot of small files (> 100).

.
.SS "Operation modifiers"
.TP
.B \-#
 # compression level [1-19] (default:3)
.TP
.BR \--ultra
 unlocks high compression levels 20+ (maximum 22), using a lot more memory.
Note that decompression will also require more memory when using these levels.
.TP
.B \-D file
 use `file` as Dictionary to compress or decompress FILE(s)
.TP
.BR \--no-dictID
 do not store dictionary ID within frame header (dictionary compression).
 The decoder will have to rely on implicit knowledge about which dictionary to use,
it won't be able to check if it's correct.
.TP
.B \-o file
 save result into `file` (only possible with a single INPUT-FILE)
.TP
.BR \-f ", " --force
 overwrite output without prompting
.TP
.BR \-c ", " --stdout
 force write to standard output, even if it is the console
.TP
.BR \--[no-]sparse
 enable / disable sparse FS support, to make files with many zeroes smaller on disk.
 Creating sparse files may save disk space and speed up the decompression
by reducing the amount of disk I/O.
 default : enabled when output is into a file, and disabled when output is stdout.
 This setting overrides default and can force sparse mode over stdout.
.TP
.BR \--rm
 remove source file(s) after successful compression or decompression
.TP
.BR \-k ", " --keep
 keep source file(s) after successful compression or decompression.
 This is the default behavior.
.TP
.BR \-r
 operate recursively on directories
.TP
.BR \-h/\-H ", " --help
 display help/long help and exit
.TP
.BR \-V ", " --version
 display Version number and exit
.TP
.BR \-v ", " --verbose
 verbose mode
.TP
.BR \-q ", " --quiet
 suppress warnings, interactivity and notifications.
 specify twice to suppress errors too.
.TP
.BR \-C ", " --[no-]check
 add integrity check computed from uncompressed data (default : enabled)
.TP
.BR \-t ", " --test
 Test the integrity of compressed files. This option is equivalent to \fB--decompress --stdout > /dev/null\fR.
 No files are created or removed.
.TP
.BR --
 All arguments after -- are treated as files


.SH DICTIONARY BUILDER
.PP
\fBzstd\fR offers \fIdictionary\fR compression, useful for very small files and messages.
It's possible to train \fBzstd\fR with some samples, the result of which is saved into a file called `dictionary`.
Then during compression and decompression, make reference to the same dictionary.
It will improve compression ratio of small files.
Typical gains range from ~10% (at 64KB) to x5 better (at <1KB).
.TP
.B \--train FILEs
 use FILEs as training set to create a dictionary. The training set should contain a lot of small files (> 100),
and weight typically 100x the target dictionary size (for example, 10 MB for a 100 KB dictionary)
.TP
.B \-o file
 dictionary saved into `file` (default: dictionary)
.TP
.B \--maxdict #
 limit dictionary to specified size (default : 112640)
.TP
.B \--dictID #
 A dictionary ID is a locally unique ID that a decoder can use to verify it is using the right dictionary.
 By default, zstd will create a 4-bytes random number ID.
 It's possible to give a precise number instead.
 Short numbers have an advantage : an ID < 256 will only need 1 byte in the compressed frame header,
 and an ID < 65536 will only need 2 bytes. This compares favorably to 4 bytes default.
 However, it's up to the dictionary manager to not assign twice the same ID to 2 different dictionaries.
.TP
.B \-s#
 dictionary selectivity level (default: 9)
 the smaller the value, the denser the dictionary, improving its efficiency but reducing its possible maximum size.

.SH BENCHMARK
.TP
.B \-b#
 benchmark file(s) using compression level #
.TP
.B \-e#
 benchmark file(s) using multiple compression levels, from -b# to -e# (included).
.TP
.B \-i#
 minimum evaluation time, in seconds (default : 3s), benchmark mode only
.TP
.B \-B#
 cut file into independent blocks of size # (default: no block)


.SH ADVANCED COMPRESSION OPTIONS
.TP
.B \--zstd[=\fIoptions\fR]
.PD
\fBzstd\fR provides 22 predefined compression levels. The selected or default predefined compression level can be changed with advanced compression options.
The \fIoptions\fR are provided as a comma-separated list. You may specify only the \fIoptions\fR you want to change and the rest will be taken from the selected or default compression level.
The list of available \fIoptions\fR:
.RS

.TP
.BI strategy= strat
.PD 0
.TP
.BI strat= strat
.PD
Specify a strategy used by a match finder.
.IP ""
There are 8 strategies numbered from 0 to 7, from faster to stronger:
0=ZSTD_fast, 1=ZSTD_dfast, 2=ZSTD_greedy, 3=ZSTD_lazy, 4=ZSTD_lazy2, 5=ZSTD_btlazy2, 6=ZSTD_btopt, 7=ZSTD_btopt2.
.IP ""

.TP
.BI windowLog= wlog
.PD 0
.TP
.BI wlog= wlog
.PD
Specify the maximum number of bits for a match distance.
.IP ""
The higher number of bits increases the chance to find a match what usually improves compression ratio.
It also increases memory requirements for compressor and decompressor.
.IP ""
The minimum \fIwlog\fR is 10 (1 KiB) and the maximum is 25 (32 MiB) for 32-bit compilation and 27 (128 MiB) for 64-bit compilation.
.IP ""

.TP
.BI hashLog= hlog
.PD 0
.TP
.BI hlog= hlog
.PD
Specify the maximum number of bits for a hash table.
.IP ""
The bigger hash table causes less collisions what usually make compression faster but requires more memory during compression.
.IP ""
The minimum \fIhlog\fR is 6 (64 B) and the maximum is 25 (32 MiB) for 32-bit compilation and 27 (128 MiB) for 64-bit compilation.

.TP
.BI chainLog= clog
.PD 0
.TP
.BI clog= clog
.PD
Specify the maximum number of bits for a hash chain or a binary tree.
.IP ""
The higher number of bits increases the chance to find a match what usually improves compression ratio.
It also slows down compression speed and increases memory requirements for compression.
This option is ignored for the ZSTD_fast strategy.
.IP ""
The minimum \fIclog\fR is 6 (64 B) and the maximum is 26 (64 MiB) for 32-bit compilation and 28 (256 MiB) for 64-bit compilation.
.IP ""

.TP
.BI searchLog= slog
.PD 0
.TP
.BI slog= slog
.PD
Specify the maximum number of searches in a hash chain or a binary tree using logarithmic scale.
.IP ""
The bigger number of searches increases the chance to find a match what usually improves compression ratio but decreases compression speed.
.IP ""
The minimum \fIslog\fR is 1 and the maximum is 24 for 32-bit compilation and 26 for 64-bit compilation.
.IP ""

.TP
.BI searchLength= slen
.PD 0
.TP
.BI slen= slen
.PD
Specify the minimum searched length of a match in a hash table.
.IP ""
The bigger search length usually decreases compression ratio but improves decompression speed.
.IP ""
The minimum \fIslen\fR is 3 and the maximum is 7.
.IP ""

.TP
.BI targetLength= tlen
.PD 0
.TP
.BI tlen= tlen
.PD
Specify the minimum match length that causes a match finder to interrupt searching of better matches.
.IP ""
The bigger minimum match length usually improves compression ratio but decreases compression speed.
This option is used only with ZSTD_btopt and ZSTD_btopt2 strategies.
.IP ""
The minimum \fItlen\fR is 4 and the maximum is 999.
.IP ""

.PP
.B An example
.br
The following parameters sets advanced compression options to predefined level 19 for files bigger than 256 KB:
.IP ""
\fB--zstd=\fRwindowLog=23,chainLog=23,hashLog=22,searchLog=6,searchLength=3,targetLength=48,strategy=6

.SH BUGS
Report bugs at:- https://github.com/facebook/zstd/issues

.SH AUTHOR
Yann Collet