812e8f2a16
* perf improvements for zstd decode tldr: 7.5% average decode speedup on silesia corpus at compression levels 1-3 (sandy bridge) Background: while investigating zstd perf differences between clang and gcc I noticed that even though gcc is vectorizing the loop in in wildcopy, it was not being done as well as could be done by hand. The sites where wildcopy is invoked have an interesting distribution of lengths to be copied. The loop trip count is rarely above 1, yet long copies are common enough to make their performance important.The code in zstd_decompress.c to invoke wildcopy handles the latter well but the gcc autovectorizer introduces a needlessly expensive startup check for vectorization. See how GCC autovectorizes the loop here: https://godbolt.org/z/apr0x0 Here is the code after this diff has been applied: (left hand side is the good one, right is with vectorizer on) After: https://godbolt.org/z/OwO4F8 Note that autovectorization still does not do a good job on the optimized version, so it's turned off\ via attribute and flag. I found that neither attribute nor command-line flag were entirely successful in turning off vectorization, which is why there were both. silesia benchmark data - second triad of each file is with the original code: file orig compressedratio encode decode change 1#dickens 10192446-> 4268865(2.388), 198.9MB/s 709.6MB/s 2#dickens 10192446-> 3876126(2.630), 128.7MB/s 552.5MB/s 3#dickens 10192446-> 3682956(2.767), 104.6MB/s 537MB/s 1#dickens 10192446-> 4268865(2.388), 195.4MB/s 659.5MB/s 7.60% 2#dickens 10192446-> 3876126(2.630), 127MB/s 516.3MB/s 7.01% 3#dickens 10192446-> 3682956(2.767), 105MB/s 479.5MB/s 11.99% 1#mozilla 51220480-> 20117517(2.546), 285.4MB/s 734.9MB/s 2#mozilla 51220480-> 19067018(2.686), 220.8MB/s 686.3MB/s 3#mozilla 51220480-> 18508283(2.767), 152.2MB/s 669.4MB/s 1#mozilla 51220480-> 20117517(2.546), 283.4MB/s 697.9MB/s 5.30% 2#mozilla 51220480-> 19067018(2.686), 225.9MB/s 665MB/s 3.20% 3#mozilla 51220480-> 18508283(2.767), 154.5MB/s 640.6MB/s 4.50% 1#mr 9970564-> 3840242(2.596), 262.4MB/s 899.8MB/s 2#mr 9970564-> 3600976(2.769), 181.2MB/s 717.9MB/s 3#mr 9970564-> 3563987(2.798), 116.3MB/s 620MB/s 1#mr 9970564-> 3840242(2.596), 253.2MB/s 827.3MB/s 8.76% 2#mr 9970564-> 3600976(2.769), 177.4MB/s 655.4MB/s 9.54% 3#mr 9970564-> 3563987(2.798), 111.2MB/s 564.2MB/s 9.89% 1#nci 33553445-> 2849306(11.78), 575.2MB/s , 1335.8MB/s 2#nci 33553445-> 2890166(11.61), 509.3MB/s , 1238.1MB/s 3#nci 33553445-> 2857408(11.74), 431MB/s , 1210.7MB/s 1#nci 33553445-> 2849306(11.78), 565.4MB/s , 1220.2MB/s 9.47% 2#nci 33553445-> 2890166(11.61), 508.2MB/s , 1128.4MB/s 9.72% 3#nci 33553445-> 2857408(11.74), 429.1MB/s , 1097.7MB/s 10.29% 1#ooffice 6152192-> 3590954(1.713), 231.4MB/s , 662.6MB/s 2#ooffice 6152192-> 3323931(1.851), 162.8MB/s , 592.6MB/s 3#ooffice 6152192-> 3145625(1.956), 99.9MB/s , 549.6MB/s 1#ooffice 6152192-> 3590954(1.713), 224.7MB/s , 624.2MB/s 6.15% 2#ooffice 6152192-> 3323931 (1.851), 155MB/s , 564.5MB/s 4.98% 3#ooffice 6152192-> 3145625(1.956), 101.1MB/s , 521.2MB/s 5.45% 1#osdb 10085684-> 3739042(2.697), 271.9MB/s 876.4MB/s 2#osdb 10085684-> 3493875(2.887), 208.2MB/s 857MB/s 3#osdb 10085684-> 3515831(2.869), 135.3MB/s 805.4MB/s 1#osdb 10085684-> 3739042(2.697), 257.4MB/s 793.8MB/s 10.41% 2#osdb 10085684-> 3493875(2.887), 209.7MB/s 776.1MB/s 10.42% 3#osdb 10085684-> 3515831(2.869), 130.6MB/s 727.7MB/s 10.68% 1#reymont 6627202-> 2152771(3.078), 198.9MB/s 696.2MB/s 2#reymont 6627202-> 2071140(3.200), 170MB/s 595.2MB/s 3#reymont 6627202-> 1953597(3.392), 128.5MB/s 609.7MB/s 1#reymont 6627202-> 2152771(3.078), 199.6MB/s 655.2MB/s 6.26% 2#reymont 6627202-> 2071140(3.200), 168.2MB/s 554.4MB/s 7.36% 3#reymont 6627202-> 1953597(3.392), 128.7MB/s 557.4MB/s 9.38% 1#samba 21606400-> 5510994(3.921), 338.1MB/s 1066MB/s 2#samba 21606400-> 5240208(4.123), 258.7MB/s 992.3MB/s 3#samba 21606400-> 5003358(4.318), 200.2MB/s 991.1MB/s 1#samba 21606400-> 5510994(3.921), 330.8MB/s 974MB/s 9.45% 2#samba 21606400-> 5240208(4.123), 257.9MB/s 919.4MB/s 7.93% 3#samba 21606400-> 5003358(4.318), 198.5MB/s 908.9MB/s 9.04% 1#sao 7251944-> 6256401(1.159), 194.6MB/s 602.2MB/s 2#sao 7251944-> 5808761(1.248), 128.2MB/s 532.1MB/s 3#sao 7251944-> 5556318(1.305), 73MB/s 509.4MB/s 1#sao 7251944-> 6256401(1.159), 198.7MB/s 580.7MB/s 3.70% 2#sao 7251944-> 5808761(1.248), 129.1MB/s 502.7MB/s 5.85% 3#sao 7251944-> 5556318(1.305), 74.6MB/s 493.1MB/s 3.31% 1#webster 41458703-> 13692222(3.028), 222.3MB/s 752MB/s 2#webster 41458703-> 12842646(3.228), 157.6MB/s 532.2MB/s 3#webster 41458703-> 12191964(3.400), 124MB/s 468.5MB/s 1#webster 41458703-> 13692222(3.028), 219.7MB/s 697MB/s 7.89% 2#webster 41458703-> 12842646(3.228), 153.9MB/s 495.4MB/s 7.43% 3#webster 41458703-> 12191964(3.400), 124.8MB/s 444.8MB/s 5.33% 1#xml 5345280-> 696652(7.673), 485MB/s , 1333.9MB/s 2#xml 5345280-> 681492(7.843), 405.2MB/s , 1237.5MB/s 3#xml 5345280-> 639057(8.364), 328.5MB/s , 1281.3MB/s 1#xml 5345280-> 696652(7.673), 473.1MB/s , 1232.4MB/s 8.24% 2#xml 5345280-> 681492(7.843), 398.6MB/s , 1145.9MB/s 7.99% 3#xml 5345280-> 639057(8.364), 327.1MB/s , 1175MB/s 9.05% 1#x-ray 8474240-> 6772557(1.251), 521.3MB/s 762.6MB/s 2#x-ray 8474240-> 6684531(1.268), 230.5MB/s 688.5MB/s 3#x-ray 8474240-> 6166679(1.374), 68.7MB/s 478.8MB/s 1#x-ray 8474240-> 6772557(1.251), 502.8MB/s 736.7MB/s 3.52% 2#x-ray 8474240-> 6684531(1.268), 224.4MB/s 662MB/s 4.00% 3#x-ray 8474240-> 6166679(1.374), 67.3MB/s 437.8MB/s 9.37% 7.51% * makefile changed to only pass -fno-tree-vectorize to gcc * <Replace this line with a title. Use 1 line only, 67 chars or less> Don't add "no-tree-vectorize" attribute on clang (which defines __GNUC__) * fix for warning/error with subtraction of void* pointers * fix c90 conformance issue - ISO C90 forbids mixed declarations and code * Fix assert for negative diff, only when there is no overlap * fix overflow revealed in fuzzing tests * tweak for small speed increase
372 lines
12 KiB
C
372 lines
12 KiB
C
/*
|
|
* Copyright (c) 2016-present, Yann Collet, Facebook, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This source code is licensed under both the BSD-style license (found in the
|
|
* LICENSE file in the root directory of this source tree) and the GPLv2 (found
|
|
* in the COPYING file in the root directory of this source tree).
|
|
* You may select, at your option, one of the above-listed licenses.
|
|
*/
|
|
|
|
#ifndef ZSTD_CCOMMON_H_MODULE
|
|
#define ZSTD_CCOMMON_H_MODULE
|
|
|
|
/* this module contains definitions which must be identical
|
|
* across compression, decompression and dictBuilder.
|
|
* It also contains a few functions useful to at least 2 of them
|
|
* and which benefit from being inlined */
|
|
|
|
/*-*************************************
|
|
* Dependencies
|
|
***************************************/
|
|
#include "compiler.h"
|
|
#include "mem.h"
|
|
#include "debug.h" /* assert, DEBUGLOG, RAWLOG, g_debuglevel */
|
|
#include "error_private.h"
|
|
#define ZSTD_STATIC_LINKING_ONLY
|
|
#include "zstd.h"
|
|
#define FSE_STATIC_LINKING_ONLY
|
|
#include "fse.h"
|
|
#define HUF_STATIC_LINKING_ONLY
|
|
#include "huf.h"
|
|
#ifndef XXH_STATIC_LINKING_ONLY
|
|
# define XXH_STATIC_LINKING_ONLY /* XXH64_state_t */
|
|
#endif
|
|
#include "xxhash.h" /* XXH_reset, update, digest */
|
|
|
|
#if defined (__cplusplus)
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* ---- static assert (debug) --- */
|
|
#define ZSTD_STATIC_ASSERT(c) DEBUG_STATIC_ASSERT(c)
|
|
#define ZSTD_isError ERR_isError /* for inlining */
|
|
#define FSE_isError ERR_isError
|
|
#define HUF_isError ERR_isError
|
|
|
|
|
|
/*-*************************************
|
|
* shared macros
|
|
***************************************/
|
|
#undef MIN
|
|
#undef MAX
|
|
#define MIN(a,b) ((a)<(b) ? (a) : (b))
|
|
#define MAX(a,b) ((a)>(b) ? (a) : (b))
|
|
|
|
/**
|
|
* Return the specified error if the condition evaluates to true.
|
|
*
|
|
* In debug modes, prints additional information. In order to do that
|
|
* (particularly, printing the conditional that failed), this can't just wrap
|
|
* RETURN_ERROR().
|
|
*/
|
|
#define RETURN_ERROR_IF(cond, err, ...) \
|
|
if (cond) { \
|
|
RAWLOG(3, "%s:%d: ERROR!: check %s failed, returning %s", __FILE__, __LINE__, ZSTD_QUOTE(cond), ZSTD_QUOTE(ERROR(err))); \
|
|
RAWLOG(3, ": " __VA_ARGS__); \
|
|
RAWLOG(3, "\n"); \
|
|
return ERROR(err); \
|
|
}
|
|
|
|
/**
|
|
* Unconditionally return the specified error.
|
|
*
|
|
* In debug modes, prints additional information.
|
|
*/
|
|
#define RETURN_ERROR(err, ...) \
|
|
do { \
|
|
RAWLOG(3, "%s:%d: ERROR!: unconditional check failed, returning %s", __FILE__, __LINE__, ZSTD_QUOTE(ERROR(err))); \
|
|
RAWLOG(3, ": " __VA_ARGS__); \
|
|
RAWLOG(3, "\n"); \
|
|
return ERROR(err); \
|
|
} while(0);
|
|
|
|
/**
|
|
* If the provided expression evaluates to an error code, returns that error code.
|
|
*
|
|
* In debug modes, prints additional information.
|
|
*/
|
|
#define FORWARD_IF_ERROR(err, ...) \
|
|
do { \
|
|
size_t const err_code = (err); \
|
|
if (ERR_isError(err_code)) { \
|
|
RAWLOG(3, "%s:%d: ERROR!: forwarding error in %s: %s", __FILE__, __LINE__, ZSTD_QUOTE(err), ERR_getErrorName(err_code)); \
|
|
RAWLOG(3, ": " __VA_ARGS__); \
|
|
RAWLOG(3, "\n"); \
|
|
return err_code; \
|
|
} \
|
|
} while(0);
|
|
|
|
|
|
/*-*************************************
|
|
* Common constants
|
|
***************************************/
|
|
#define ZSTD_OPT_NUM (1<<12)
|
|
|
|
#define ZSTD_REP_NUM 3 /* number of repcodes */
|
|
#define ZSTD_REP_MOVE (ZSTD_REP_NUM-1)
|
|
static const U32 repStartValue[ZSTD_REP_NUM] = { 1, 4, 8 };
|
|
|
|
#define KB *(1 <<10)
|
|
#define MB *(1 <<20)
|
|
#define GB *(1U<<30)
|
|
|
|
#define BIT7 128
|
|
#define BIT6 64
|
|
#define BIT5 32
|
|
#define BIT4 16
|
|
#define BIT1 2
|
|
#define BIT0 1
|
|
|
|
#define ZSTD_WINDOWLOG_ABSOLUTEMIN 10
|
|
static const size_t ZSTD_fcs_fieldSize[4] = { 0, 2, 4, 8 };
|
|
static const size_t ZSTD_did_fieldSize[4] = { 0, 1, 2, 4 };
|
|
|
|
#define ZSTD_FRAMEIDSIZE 4 /* magic number size */
|
|
|
|
#define ZSTD_BLOCKHEADERSIZE 3 /* C standard doesn't allow `static const` variable to be init using another `static const` variable */
|
|
static const size_t ZSTD_blockHeaderSize = ZSTD_BLOCKHEADERSIZE;
|
|
typedef enum { bt_raw, bt_rle, bt_compressed, bt_reserved } blockType_e;
|
|
|
|
#define MIN_SEQUENCES_SIZE 1 /* nbSeq==0 */
|
|
#define MIN_CBLOCK_SIZE (1 /*litCSize*/ + 1 /* RLE or RAW */ + MIN_SEQUENCES_SIZE /* nbSeq==0 */) /* for a non-null block */
|
|
|
|
#define HufLog 12
|
|
typedef enum { set_basic, set_rle, set_compressed, set_repeat } symbolEncodingType_e;
|
|
|
|
#define LONGNBSEQ 0x7F00
|
|
|
|
#define MINMATCH 3
|
|
|
|
#define Litbits 8
|
|
#define MaxLit ((1<<Litbits) - 1)
|
|
#define MaxML 52
|
|
#define MaxLL 35
|
|
#define DefaultMaxOff 28
|
|
#define MaxOff 31
|
|
#define MaxSeq MAX(MaxLL, MaxML) /* Assumption : MaxOff < MaxLL,MaxML */
|
|
#define MLFSELog 9
|
|
#define LLFSELog 9
|
|
#define OffFSELog 8
|
|
#define MaxFSELog MAX(MAX(MLFSELog, LLFSELog), OffFSELog)
|
|
|
|
static const U32 LL_bits[MaxLL+1] = { 0, 0, 0, 0, 0, 0, 0, 0,
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
1, 1, 1, 1, 2, 2, 3, 3,
|
|
4, 6, 7, 8, 9,10,11,12,
|
|
13,14,15,16 };
|
|
static const S16 LL_defaultNorm[MaxLL+1] = { 4, 3, 2, 2, 2, 2, 2, 2,
|
|
2, 2, 2, 2, 2, 1, 1, 1,
|
|
2, 2, 2, 2, 2, 2, 2, 2,
|
|
2, 3, 2, 1, 1, 1, 1, 1,
|
|
-1,-1,-1,-1 };
|
|
#define LL_DEFAULTNORMLOG 6 /* for static allocation */
|
|
static const U32 LL_defaultNormLog = LL_DEFAULTNORMLOG;
|
|
|
|
static const U32 ML_bits[MaxML+1] = { 0, 0, 0, 0, 0, 0, 0, 0,
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
0, 0, 0, 0, 0, 0, 0, 0,
|
|
1, 1, 1, 1, 2, 2, 3, 3,
|
|
4, 4, 5, 7, 8, 9,10,11,
|
|
12,13,14,15,16 };
|
|
static const S16 ML_defaultNorm[MaxML+1] = { 1, 4, 3, 2, 2, 2, 2, 2,
|
|
2, 1, 1, 1, 1, 1, 1, 1,
|
|
1, 1, 1, 1, 1, 1, 1, 1,
|
|
1, 1, 1, 1, 1, 1, 1, 1,
|
|
1, 1, 1, 1, 1, 1, 1, 1,
|
|
1, 1, 1, 1, 1, 1,-1,-1,
|
|
-1,-1,-1,-1,-1 };
|
|
#define ML_DEFAULTNORMLOG 6 /* for static allocation */
|
|
static const U32 ML_defaultNormLog = ML_DEFAULTNORMLOG;
|
|
|
|
static const S16 OF_defaultNorm[DefaultMaxOff+1] = { 1, 1, 1, 1, 1, 1, 2, 2,
|
|
2, 1, 1, 1, 1, 1, 1, 1,
|
|
1, 1, 1, 1, 1, 1, 1, 1,
|
|
-1,-1,-1,-1,-1 };
|
|
#define OF_DEFAULTNORMLOG 5 /* for static allocation */
|
|
static const U32 OF_defaultNormLog = OF_DEFAULTNORMLOG;
|
|
|
|
|
|
/*-*******************************************
|
|
* Shared functions to include for inlining
|
|
*********************************************/
|
|
static void ZSTD_copy8(void* dst, const void* src) { memcpy(dst, src, 8); }
|
|
|
|
#define COPY8(d,s) { ZSTD_copy8(d,s); d+=8; s+=8; }
|
|
static void ZSTD_copy16(void* dst, const void* src) { memcpy(dst, src, 16); }
|
|
#define COPY16(d,s) { ZSTD_copy16(d,s); d+=16; s+=16; }
|
|
|
|
#define WILDCOPY_OVERLENGTH 8
|
|
#define VECLEN 16
|
|
|
|
typedef enum {
|
|
ZSTD_no_overlap,
|
|
ZSTD_overlap_src_before_dst,
|
|
/* ZSTD_overlap_dst_before_src, */
|
|
} ZSTD_overlap_e;
|
|
|
|
/*! ZSTD_wildcopy() :
|
|
* custom version of memcpy(), can overwrite up to WILDCOPY_OVERLENGTH bytes (if length==0) */
|
|
MEM_STATIC FORCE_INLINE_ATTR DONT_VECTORIZE
|
|
void ZSTD_wildcopy(void* dst, const void* src, ptrdiff_t length, ZSTD_overlap_e ovtype)
|
|
{
|
|
ptrdiff_t diff = (BYTE*)dst - (const BYTE*)src;
|
|
const BYTE* ip = (const BYTE*)src;
|
|
BYTE* op = (BYTE*)dst;
|
|
BYTE* const oend = op + length;
|
|
|
|
assert(diff >= 8 || (ovtype == ZSTD_no_overlap && diff < -8));
|
|
if (length < VECLEN || (ovtype == ZSTD_overlap_src_before_dst && diff < VECLEN)) {
|
|
do
|
|
COPY8(op, ip)
|
|
while (op < oend);
|
|
}
|
|
else {
|
|
if ((length & 8) == 0)
|
|
COPY8(op, ip);
|
|
do {
|
|
COPY16(op, ip);
|
|
}
|
|
while (op < oend);
|
|
}
|
|
}
|
|
|
|
/*! ZSTD_wildcopy_16min() :
|
|
* same semantics as ZSTD_wilcopy() except guaranteed to be able to copy 16 bytes at the start */
|
|
MEM_STATIC FORCE_INLINE_ATTR DONT_VECTORIZE
|
|
void ZSTD_wildcopy_16min(void* dst, const void* src, ptrdiff_t length, ZSTD_overlap_e ovtype)
|
|
{
|
|
ptrdiff_t diff = (BYTE*)dst - (const BYTE*)src;
|
|
const BYTE* ip = (const BYTE*)src;
|
|
BYTE* op = (BYTE*)dst;
|
|
BYTE* const oend = op + length;
|
|
|
|
assert(length >= 8);
|
|
assert(diff >= 8 || (ovtype == ZSTD_no_overlap && diff < -8));
|
|
|
|
if (ovtype == ZSTD_overlap_src_before_dst && diff < VECLEN) {
|
|
do
|
|
COPY8(op, ip)
|
|
while (op < oend);
|
|
}
|
|
else {
|
|
if ((length & 8) == 0)
|
|
COPY8(op, ip);
|
|
do {
|
|
COPY16(op, ip);
|
|
}
|
|
while (op < oend);
|
|
}
|
|
}
|
|
|
|
MEM_STATIC void ZSTD_wildcopy_e(void* dst, const void* src, void* dstEnd) /* should be faster for decoding, but strangely, not verified on all platform */
|
|
{
|
|
const BYTE* ip = (const BYTE*)src;
|
|
BYTE* op = (BYTE*)dst;
|
|
BYTE* const oend = (BYTE*)dstEnd;
|
|
do
|
|
COPY8(op, ip)
|
|
while (op < oend);
|
|
}
|
|
|
|
|
|
/*-*******************************************
|
|
* Private declarations
|
|
*********************************************/
|
|
typedef struct seqDef_s {
|
|
U32 offset;
|
|
U16 litLength;
|
|
U16 matchLength;
|
|
} seqDef;
|
|
|
|
typedef struct {
|
|
seqDef* sequencesStart;
|
|
seqDef* sequences;
|
|
BYTE* litStart;
|
|
BYTE* lit;
|
|
BYTE* llCode;
|
|
BYTE* mlCode;
|
|
BYTE* ofCode;
|
|
size_t maxNbSeq;
|
|
size_t maxNbLit;
|
|
U32 longLengthID; /* 0 == no longLength; 1 == Lit.longLength; 2 == Match.longLength; */
|
|
U32 longLengthPos;
|
|
} seqStore_t;
|
|
|
|
/**
|
|
* Contains the compressed frame size and an upper-bound for the decompressed frame size.
|
|
* Note: before using `compressedSize`, check for errors using ZSTD_isError().
|
|
* similarly, before using `decompressedBound`, check for errors using:
|
|
* `decompressedBound != ZSTD_CONTENTSIZE_ERROR`
|
|
*/
|
|
typedef struct {
|
|
size_t compressedSize;
|
|
unsigned long long decompressedBound;
|
|
} ZSTD_frameSizeInfo; /* decompress & legacy */
|
|
|
|
const seqStore_t* ZSTD_getSeqStore(const ZSTD_CCtx* ctx); /* compress & dictBuilder */
|
|
void ZSTD_seqToCodes(const seqStore_t* seqStorePtr); /* compress, dictBuilder, decodeCorpus (shouldn't get its definition from here) */
|
|
|
|
/* custom memory allocation functions */
|
|
void* ZSTD_malloc(size_t size, ZSTD_customMem customMem);
|
|
void* ZSTD_calloc(size_t size, ZSTD_customMem customMem);
|
|
void ZSTD_free(void* ptr, ZSTD_customMem customMem);
|
|
|
|
|
|
MEM_STATIC U32 ZSTD_highbit32(U32 val) /* compress, dictBuilder, decodeCorpus */
|
|
{
|
|
assert(val != 0);
|
|
{
|
|
# if defined(_MSC_VER) /* Visual */
|
|
unsigned long r=0;
|
|
_BitScanReverse(&r, val);
|
|
return (unsigned)r;
|
|
# elif defined(__GNUC__) && (__GNUC__ >= 3) /* GCC Intrinsic */
|
|
return 31 - __builtin_clz(val);
|
|
# else /* Software version */
|
|
static const U32 DeBruijnClz[32] = { 0, 9, 1, 10, 13, 21, 2, 29, 11, 14, 16, 18, 22, 25, 3, 30, 8, 12, 20, 28, 15, 17, 24, 7, 19, 27, 23, 6, 26, 5, 4, 31 };
|
|
U32 v = val;
|
|
v |= v >> 1;
|
|
v |= v >> 2;
|
|
v |= v >> 4;
|
|
v |= v >> 8;
|
|
v |= v >> 16;
|
|
return DeBruijnClz[(v * 0x07C4ACDDU) >> 27];
|
|
# endif
|
|
}
|
|
}
|
|
|
|
|
|
/* ZSTD_invalidateRepCodes() :
|
|
* ensures next compression will not use repcodes from previous block.
|
|
* Note : only works with regular variant;
|
|
* do not use with extDict variant ! */
|
|
void ZSTD_invalidateRepCodes(ZSTD_CCtx* cctx); /* zstdmt, adaptive_compression (shouldn't get this definition from here) */
|
|
|
|
|
|
typedef struct {
|
|
blockType_e blockType;
|
|
U32 lastBlock;
|
|
U32 origSize;
|
|
} blockProperties_t; /* declared here for decompress and fullbench */
|
|
|
|
/*! ZSTD_getcBlockSize() :
|
|
* Provides the size of compressed block from block header `src` */
|
|
/* Used by: decompress, fullbench (does not get its definition from here) */
|
|
size_t ZSTD_getcBlockSize(const void* src, size_t srcSize,
|
|
blockProperties_t* bpPtr);
|
|
|
|
/*! ZSTD_decodeSeqHeaders() :
|
|
* decode sequence header from src */
|
|
/* Used by: decompress, fullbench (does not get its definition from here) */
|
|
size_t ZSTD_decodeSeqHeaders(ZSTD_DCtx* dctx, int* nbSeqPtr,
|
|
const void* src, size_t srcSize);
|
|
|
|
|
|
#if defined (__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
#endif /* ZSTD_CCOMMON_H_MODULE */
|