Chris Robinson
2aa620e58f
Make reverb delay line structs use interleaved floats
2017-05-15 00:30:47 -07:00
Chris Robinson
b2760baa64
Make the reverb's early and late feedback lines interleaved
2017-05-14 23:28:22 -07:00
Chris Robinson
cc1b774837
Don't enable NFC for a 0 reference delay
2017-05-14 18:50:22 -07:00
Chris Robinson
232f05be93
Update ChangeLog for AL_SOFT_source_spatialize
2017-05-13 19:52:37 -07:00
Chris Robinson
7cbce6806b
Update a couple comments about the reverb modulation
2017-05-13 16:08:45 -07:00
Chris Robinson
0b66b2bbe7
Replace 4 separate all-passes with one vector all-pass
...
Each 4 related all-passes now share a structure with one delay line, which uses
an interleaved sample history. Also fixes some potential rounding problems for
delay lines with interleaved samples.
2017-05-13 15:45:05 -07:00
Chris Robinson
87d4710bc4
Apply reverb modulation to the late feedback lines
...
This seems to be more in-line with the intended behavior, to allow build-up and
overlap within the reverb decay, rather than a pitch-shift on input.
Unfortunately there's no readily available implementation of this reverb model
that includes modulation to compare with, so a low depth coefficient is used to
keep it very subtle.
2017-05-12 20:53:14 -07:00
Chris Robinson
d456c799fd
Remove the 0.5 gain on the reverb output
...
Turns out to be unnecessary, as it reduced the volume below what other reverb
implementations provide with the same presets.
2017-05-11 23:26:29 -07:00
Chris Robinson
685dc24299
Restore the previous reverb B2A and A2B matrices
...
Also, untranspose the A2B matrix.
2017-05-11 21:48:47 -07:00
Chris Robinson
ef58a8f205
Log whether the output limiter is enabled or disabled
2017-05-11 16:29:05 -07:00
Chris Robinson
748dfb1526
Finalize AL_SOFT_source_spatialize
2017-05-11 14:38:04 -07:00
Chris Robinson
a6f6533a28
Update ALC_OUTPUT_LIMITER_SOFT to handle ALC_DONT_CARE_SOFT
...
Essentially just adding a comment about it. Since we default to on, the
behavior already fit.
2017-05-11 11:04:25 -07:00
Chris Robinson
a2c25378a9
Reduce LIMITER_VALUE_MAX
...
The previous value couldn't actually be expressed as a float and got rounded up
to the next whole number value, leaving the potential for an overrun in the
squared sum.
2017-05-09 11:56:03 -07:00
Chris Robinson
4a4442ad91
Store the output limiter values as fixed-point integers
...
This helps keep the squared sum stable over larger updates, also avoiding the
need to keep recalculating it.
2017-05-08 16:23:16 -07:00
Chris Robinson
f880f67049
Update reverb conversion matrices and output gain
2017-05-08 13:57:31 -07:00
Chris Robinson
0dabe6398f
Apply attenuation when downmixing multi-channel sounds for panning
2017-05-07 18:28:43 -07:00
Chris Robinson
5308ea7e2a
Put the app name after filename in the window title
2017-05-07 04:29:18 -07:00
Chris Robinson
d9d2e73228
Update AL_SOURCE_SPATIALIZE_SOFT value
...
Though it didn't strictly clash since it was for a different component (global
state vs source property), 0x1213 was used by AL_RESAMPLER_NAME_SOFT. Probably
best to avoid duplicate property values regardless.
2017-05-06 10:10:10 -07:00
Chris Robinson
e1bc4c0730
Include the Built-In HRTF names in alsoft-config when enabled
2017-05-05 07:49:56 -07:00
Chris Robinson
074e4496ba
Calculate the output limiter gain using the RMS
2017-05-05 07:38:26 -07:00
Chris Robinson
64f0630fef
Move native-tools to the root directory
2017-05-05 05:03:50 -07:00
Chris Robinson
47f843632f
Make the generated data array static const
2017-05-05 04:59:07 -07:00
Chris Robinson
db6f14748c
Rename RollOff to Rolloff
2017-05-05 04:54:07 -07:00
Chris Robinson
d82e3be8f7
Increase the HRTF transition to 128 samples
2017-05-05 04:54:07 -07:00
kcat
af997bf853
Merge pull request #112 from alexey-lysiuk/embed_hrtf_pr
...
Cross-platform embedding of HRTF data
2017-05-05 04:53:11 -07:00
alexey.lysiuk
24bc8070c8
Enable embedding of HRTF data in CI config files
2017-05-05 14:30:06 +03:00
alexey.lysiuk
17dfaca43d
Implement cross-platform embedding of HRTF data
2017-05-05 14:30:06 +03:00
Chris Robinson
9c9ad2f60a
Start an extension to change the source's spatialize property
2017-05-05 02:41:34 -07:00
Chris Robinson
b639bc9913
Add a property to force source spatialization on or off
2017-05-04 12:27:10 -07:00
Chris Robinson
7829ad8fc9
Handle attenuated sources in CalcPanningAndFilters
2017-05-04 11:09:45 -07:00
Chris Robinson
23bf3d3959
Calculate the multi-channel panning in a separate function
2017-05-04 04:35:53 -07:00
Chris Robinson
14b23c2502
Print available resamplers in openal-info
2017-05-03 04:53:22 -07:00
Chris Robinson
e0ae3c7cb6
Update changelog
2017-05-03 04:41:09 -07:00
Chris Robinson
ab1cca729f
Finalize AL_SOFT_source_resampler
2017-05-03 04:33:38 -07:00
Chris Robinson
732dee5375
Rename Zero-Order Hold to Nearest
...
A bit of a misnomer now since "Nearest" implies rounding (i.e. when the sample
offset is >= .5, it should pick the next sample being closer in time), but that
adds unnecessary complications.
2017-05-03 03:34:44 -07:00
Chris Robinson
444e9563b3
Add a mixing function to blend HRIRs
...
This is a bit more efficient than calling the normal HRTF mixing function
twice, and helps solve the problem of the values generated from convolution not
being consistent with the new HRIR.
2017-05-03 03:29:21 -07:00
Chris Robinson
4e5c4b8e01
Add a slight bit of attenuation to the reverb output
2017-05-02 15:55:58 -07:00
Chris Robinson
66f9640787
Remove a duplicate check
2017-05-02 07:34:28 -07:00
Chris Robinson
53c3d48fe0
Change some ALuint parameters to ALsizei
2017-05-02 04:54:59 -07:00
Chris Robinson
1e5334176e
Rename VOICE_IS_HRTF to VOICE_HAS_HRTF
2017-05-02 04:25:08 -07:00
Chris Robinson
2f8d597f4e
Rename 'moving' flag to 'fading'
2017-05-02 04:09:01 -07:00
Chris Robinson
afe2065d60
Set a voice as 'moving' if it starts/resumes at an offset
2017-05-02 03:58:18 -07:00
Chris Robinson
f1a249b47a
Reimplement bilinear interpolation between HRIRs
...
Some data sets are just too sparse, having noticeably few measurements to
properly handle slowly panning sources. Although not perfect, bilinearly
interpolating the HRIR measurements improves the positional accuracy.
2017-05-01 15:46:25 -07:00
Chris Robinson
8d50b72d8f
Allow querying the output limiter state
2017-04-30 08:54:49 -07:00
Chris Robinson
fc2afa1eaa
Start an extension to toggle the output limiter
2017-04-30 04:21:48 -07:00
Chris Robinson
9767f4f9c3
Don't do more reverb samples than there are to fade.
...
This avoids having to clamp the fade value when incrementing it.
2017-04-28 10:25:22 -07:00
Chris Robinson
dc25370063
Fade HRTF coefficients over 64 samples at most
...
This greatly improves HRTF performance since the dual-mix only applies to the
64-sample coefficient transition. So rather than doubling the full mix, it only
doubles 64 samples out of the full mix.
2017-04-28 10:05:57 -07:00
Chris Robinson
bf138fb4ea
Combine mostly duplicate functions
2017-04-27 19:23:42 -07:00
Chris Robinson
5dc7265ad3
Properly update the delay line offsets when fading is done
2017-04-27 18:54:33 -07:00
Chris Robinson
55d9988f3f
Write directly to the output for HRTF
2017-04-27 06:35:53 -07:00
