OpenSubdiv/opensubdiv/far/patchTablesFactory.cpp

1894 lines
79 KiB
C++
Raw Normal View History

//
// Copyright 2013 Pixar
//
// Licensed under the Apache License, Version 2.0 (the "Apache License")
// with the following modification; you may not use this file except in
// compliance with the Apache License and the following modification to it:
// Section 6. Trademarks. is deleted and replaced with:
//
// 6. Trademarks. This License does not grant permission to use the trade
// names, trademarks, service marks, or product names of the Licensor
// and its affiliates, except as required to comply with Section 4(c) of
// the License and to reproduce the content of the NOTICE file.
//
// You may obtain a copy of the Apache License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the Apache License with the above modification is
// distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
// KIND, either express or implied. See the Apache License for the specific
// language governing permissions and limitations under the Apache License.
//
#include "../far/patchTablesFactory.h"
#include "../far/gregoryBasis.h"
#include "../far/topologyRefiner.h"
#include "../vtr/level.h"
#include "../vtr/refinement.h"
#include <algorithm>
#include <cassert>
#include <cstring>
namespace OpenSubdiv {
namespace OPENSUBDIV_VERSION {
namespace {
//
// A convenience container for the different types of feature adaptive patches
//
template <class TYPE>
struct PatchTypes {
static const int NUM_TRANSITIONS=6,
NUM_ROTATIONS=4;
TYPE R[NUM_TRANSITIONS], // regular patch
S[NUM_TRANSITIONS][NUM_ROTATIONS], // single-crease patch
B[NUM_TRANSITIONS][NUM_ROTATIONS], // boundary patch (4 rotations)
C[NUM_TRANSITIONS][NUM_ROTATIONS], // corner patch (4 rotations)
G, // gregory patch
GB, // gregory boundary patch
GP; // gregory basis patch
PatchTypes() { std::memset(this, 0, sizeof(PatchTypes<TYPE>)); }
// Returns the number of patches based on the patch type in the descriptor
TYPE & getValue( Far::PatchDescriptor desc ) {
switch (desc.GetType()) {
case Far::PatchDescriptor::REGULAR : return R[desc.GetPattern()];
case Far::PatchDescriptor::SINGLE_CREASE : return S[desc.GetPattern()][desc.GetRotation()];
case Far::PatchDescriptor::BOUNDARY : return B[desc.GetPattern()][desc.GetRotation()];
case Far::PatchDescriptor::CORNER : return C[desc.GetPattern()][desc.GetRotation()];
case Far::PatchDescriptor::GREGORY : return G;
case Far::PatchDescriptor::GREGORY_BOUNDARY : return GB;
case Far::PatchDescriptor::GREGORY_BASIS : return GP;
default : assert(0);
}
// can't be reached (suppress compiler warning)
return R[0];
}
// Counts the number of arrays required to store each type of patch used
// in the primitive
int getNumPatchArrays() const {
int result=0;
for (int i=0; i<6; ++i) {
if (R[i]) ++result;
for (int j=0; j<4; ++j) {
if (S[i][j]) ++result;
if (B[i][j]) ++result;
if (C[i][j]) ++result;
}
}
if (G) ++result;
if (GB) ++result;
if (GP) ++result;
return result;
}
// Returns true if there's any single-crease patch
bool hasSingleCreasedPatches() const {
for (int i=0; i<6; ++i) {
for (int j=0; j<4; ++j) {
if (S[i][j]) return true;
}
}
return false;
}
};
typedef PatchTypes<Far::Index *> PatchCVPointers;
typedef PatchTypes<Far::PatchParam *> PatchParamPointers;
typedef PatchTypes<Far::Index *> SharpnessIndexPointers;
typedef PatchTypes<Far::Index> PatchFVarOffsets;
typedef PatchTypes<Far::Index **> PatchFVarPointers;
//
// A simple struct containing all information gathered about a face that is relevant
// to constructing a patch for it (some of these enums should probably be defined more
// as part of PatchTables)
//
// Like the HbrFace<T>::AdaptiveFlags, this struct aggregates all of the face tags
// supporting feature adaptive refinement. For now it is not used elsewhere and can
// remain local to this implementation, but we may want to move it into a header of
// its own if it has greater use later.
//
// Note that several properties being assigned here attempt to do so given a 4-bit
// mask of properties at the edges or vertices of the quad. Still not sure exactly
// what will be done this way, but the goal is to create lookup tables (of size 16
// for the 4 bits) to quickly determine was is needed, rather than iteration and
// branching on the edges or vertices.
//
struct PatchFaceTag {
public:
// The HBR_ADAPTIVE TransitionType from <hbr/face.h> -- now named to more clearly
// reflect the number and orientation of transitional edges. Note that the values
// assigned here need to match the intended purpose to remain consistent with Hbr:
enum TransitionType {
NONE = 0,
TRANS_ONE = 1,
TRANS_TWO_ADJ = 2,
TRANS_THREE = 3,
TRANS_ALL = 4,
TRANS_TWO_OPP = 5
};
public:
unsigned int _hasPatch : 1;
unsigned int _isRegular : 1;
unsigned int _isTransitional : 1;
unsigned int _transitionType : 3;
unsigned int _transitionRot : 2;
unsigned int _boundaryIndex : 2;
unsigned int _boundaryCount : 3;
unsigned int _hasBoundaryEdge : 3;
unsigned int _isSingleCrease : 1;
void clear() { std::memset(this, 0, sizeof(*this)); }
void assignBoundaryPropertiesFromEdgeMask(int boundaryEdgeMask) {
//
// The number of rotations to apply for boundary or corner patches varies on both
// where the boundary/corner occurs and whether boundary or corner -- so using a
// 4-bit mask should be sufficient to quickly determine all cases:
//
// Note that we currently expect patches with multiple boundaries to have already
// been isolated, so asserts are applied for such unexpected cases.
//
// Is the compiler going to build the 16-entry lookup table here, or should we do
// it ourselves?
//
_hasBoundaryEdge = true;
switch (boundaryEdgeMask) {
case 0x0: _boundaryCount = 0, _boundaryIndex = 0, _hasBoundaryEdge = false; break; // no boundaries
case 0x1: _boundaryCount = 1, _boundaryIndex = 0; break; // boundary edge 0
case 0x2: _boundaryCount = 1, _boundaryIndex = 1; break; // boundary edge 1
case 0x3: _boundaryCount = 2, _boundaryIndex = 1; break; // corner/crease vertex 1
case 0x4: _boundaryCount = 1, _boundaryIndex = 2; break; // boundary edge 2
case 0x5: assert(false); break; // N/A - opposite boundary edges
case 0x6: _boundaryCount = 2, _boundaryIndex = 2; break; // corner/crease vertex 2
case 0x7: assert(false); break; // N/A - three boundary edges
case 0x8: _boundaryCount = 1, _boundaryIndex = 3; break; // boundary edge 3
case 0x9: _boundaryCount = 2, _boundaryIndex = 0; break; // corner/crease vertex 0
case 0xa: assert(false); break; // N/A - opposite boundary edges
case 0xb: assert(false); break; // N/A - three boundary edges
case 0xc: _boundaryCount = 2, _boundaryIndex = 3; break; // corner/crease vertex 3
case 0xd: assert(false); break; // N/A - three boundary edges
case 0xe: assert(false); break; // N/A - three boundary edges
case 0xf: assert(false); break; // N/A - all boundaries
default: assert(false); break;
}
}
void assignBoundaryPropertiesFromVertexMask(int boundaryVertexMask) {
//
// This is strictly needed for the irregular case when a vertex is a boundary in
// the presence of no boundary edges -- an extra-ordinary face with only one corner
// on the boundary.
//
// Its unclear at this point if patches with more than one such vertex are supported
// (if so, how do we deal with rotations) so for now we only allow one such vertex
// and assert for all other cases.
//
assert(_hasBoundaryEdge == false);
switch (boundaryVertexMask) {
case 0x0: _boundaryCount = 0; break; // no boundaries
case 0x1: _boundaryCount = 1, _boundaryIndex = 0; break; // boundary vertex 0
case 0x2: _boundaryCount = 1, _boundaryIndex = 1; break; // boundary vertex 1
case 0x3: assert(false); break;
case 0x4: _boundaryCount = 1, _boundaryIndex = 2; break; // boundary vertex 2
case 0x5: assert(false); break;
case 0x6: assert(false); break;
case 0x7: assert(false); break;
case 0x8: _boundaryCount = 1, _boundaryIndex = 3; break; // boundary vertex 3
case 0x9: assert(false); break;
case 0xa: assert(false); break;
case 0xb: assert(false); break;
case 0xc: assert(false); break;
case 0xd: assert(false); break;
case 0xe: assert(false); break;
case 0xf: assert(false); break;
default: assert(false); break;
}
}
void assignTransitionRotationForCorner(int transitionEdgeMask) {
//
// Corner transition patches have only two interior edges that may be transitional.
//
// Either both are transitional (TRANS_TWO_ADJ) with only a single possible orientation,
// or only one is transitional (TRANS_ONE) with two possibilities. The former case is
// trivial. For the latter, use the known corner index to identify one of the two
// possible transition masks and test to determine between the two cases.
//
if (_transitionType == TRANS_ONE) {
int const edgeMaskPerCorner[] = { 4, 8, 1, 2 };
_transitionRot = 1 + (edgeMaskPerCorner[_boundaryIndex] != transitionEdgeMask);
} else {
_transitionRot = 1;
}
}
void assignTransitionRotationForBoundary(int transitionEdgeMask) {
//
// Boundary transition patches have three interior edges that may be transitional.
//
// The case of all three transitional (TRANS_THREE) has only one orientation, while the
// case of two opposite transitional edges (TRANS_TWO_OPP) also has only one orientation.
// So both of these are trivially handled.
//
// The case of a single transitional edge (TRANS_ONE) or one transitional edge (TRANS_TWO_ADJ)
// both have multiple orientations -- three for TRANS_ONE and two for TRANS_TWO_ADJ. Each is
// handled separately:
//
if (_transitionType == TRANS_ONE) {
if (transitionEdgeMask == (1 << ((_boundaryIndex + 2) % 4))) {
_transitionRot = 2;
} else if (transitionEdgeMask == (1 << ((_boundaryIndex + 1) % 4))) {
_transitionRot = 1;
} else {
_transitionRot = 3;
}
// XXXX manuelk mirror this rotation to match shader idiosyncracies
_transitionRot = (4-_transitionRot)%4;
} else if (_transitionType == TRANS_TWO_ADJ) {
int const edgeMaskPerBoundary[] = { 6, 12, 9, 3 };
_transitionRot = 1 + (edgeMaskPerBoundary[_boundaryIndex] == transitionEdgeMask);
} else if (_transitionType == TRANS_THREE) {
_transitionRot = 0;
} else {
_transitionRot = 1;
}
}
void assignTransitionRotationForSingleCrease(int transitionEdgeMask) {
//
// Single crease transition patches.
//
// rotate edgemask by boundaryIndex to align the creased edge
//
transitionEdgeMask = ((transitionEdgeMask >> _boundaryIndex) |
(transitionEdgeMask << (4-_boundaryIndex))) % 16;
/*
edgemask type : rotation to match to shader
0000 0 : NONE : 0
0001 1 : ONE : 0
0010 2 : ONE : 3
0011 3 : TWO_ADJ : 3
0100 4 : ONE : 2
0101 5 : TWO_OPP : 0
0110 6 : TWO_ADJ : 2
0111 7 : THREE : 1 (needs verify)
1000 8 : ONE : 1
1001 9 : TWO_ADJ : 0
1010 10 : TWO_OPP : 1
1011 11 : THREE : 2 (needs verify)
1100 12 : TWO_ADJ : 1
1101 13 : THREE : 3
1110 14 : THREE : 0 (needs verify)
1111 15 : ALL : 0
*/
static int transitionRots[16] = {0, 0, 3, 3, 2, 0, 2, 1, 1, 0, 1, 2, 1, 3, 0, 0 };
_transitionRot = transitionRots[transitionEdgeMask];
}
void assignTransitionPropertiesFromEdgeMask(int transitionEdgeMask) {
//
// Note the transition rotations will be a function of the boundary rotations, and
// so boundary rotations/index should have been previously assigned:
//
// As with the boundary rotation case, consider retrieving values from static 16-
// entry lookup tables if possible (depending on the function involving boundary
// rotations)...
//
_isTransitional = (transitionEdgeMask != 0);
switch (transitionEdgeMask) {
case 0x0: _transitionType = NONE; break; // no transitions
case 0x1: _transitionType = TRANS_ONE; break; // single edge 0
case 0x2: _transitionType = TRANS_ONE; break; // single edge 1
case 0x3: _transitionType = TRANS_TWO_ADJ; break; // two adjacent edges, 0 and 1
case 0x4: _transitionType = TRANS_ONE; break; // single edge 2
case 0x5: _transitionType = TRANS_TWO_OPP; break; // two opposite edges, 0 and 2
case 0x6: _transitionType = TRANS_TWO_ADJ; break; // two adjacent edges, 1 and 2
case 0x7: _transitionType = TRANS_THREE; break; // three edges, all but 3
case 0x8: _transitionType = TRANS_ONE; break; // single edge 3
case 0x9: _transitionType = TRANS_TWO_ADJ; break; // two adjacent edges, 3 and 0
case 0xa: _transitionType = TRANS_TWO_OPP; break; // two opposite edges, 1 and 3
case 0xb: _transitionType = TRANS_THREE; break; // three edges, all but 2
case 0xc: _transitionType = TRANS_TWO_ADJ; break; // two adjacent edges, 2 and 3
case 0xd: _transitionType = TRANS_THREE; break; // three edges, all but 1
case 0xe: _transitionType = TRANS_THREE; break; // three edges, all but 0
case 0xf: _transitionType = TRANS_ALL; break; // all edges
default: assert(false); break;
}
// May need another switch/lookup table here or combine it with the above -- the
// results below are a function of both transition and boundary properties...
if (transitionEdgeMask == 0) {
_transitionRot = 0;
} else if (_boundaryCount == 0 and _isSingleCrease) {
assignTransitionRotationForSingleCrease(transitionEdgeMask);
} else if (_boundaryCount == 0) {
// XXXX manuelk Rotations are mostly a direct map of the transitionEdgeMask
// Except for:
// - TRANS_TWO_ADJ that has rotation { 1, 2, 0, 3 }
// - TRANS_THREE that has rotation { 3, 2, 1, 0 }
// (matching shader idiosyncracies)
static unsigned char transitionRots[16] = {0, 0, 1, 1, 2, 0, 2, 3, 3, 0, 1, 2, 3, 1, 0, 0};
_transitionRot = transitionRots[transitionEdgeMask];
} else if (_boundaryCount == 1) {
assignTransitionRotationForBoundary(transitionEdgeMask);
} else if (_boundaryCount == 2) {
assignTransitionRotationForCorner(transitionEdgeMask);
}
}
};
typedef std::vector<PatchFaceTag> PatchTagVector;
//
// Trivial anonymous helper functions:
//
inline void
offsetAndPermuteIndices(Far::Index const indices[], int count,
Far::Index offset, int const permutation[],
Far::Index result[]) {
if (permutation) {
for (int i = 0; i < count; ++i) {
result[i] = offset + indices[permutation[i]];
}
} else if (offset) {
for (int i = 0; i < count; ++i) {
result[i] = offset + indices[i];
}
} else {
std::memcpy(result, indices, count * sizeof(Far::Index));
}
}
} // namespace anon
namespace Far {
//
// Face-varying channel cursor
//
// This cursors allows to iterate over a set of selected face-varying channels.
// If client-code specifies an optional sub-set of the list of channels carried
// by the TopologyRefiner, the cursor can traverse this list and return both its
// current position in the sub-set and the original index of the corresponding
// channel in the TopologyRefiner.
//
class FVarChannelCursor {
public:
FVarChannelCursor(TopologyRefiner const & refiner,
PatchTablesFactory::Options options) {
if (options.generateFVarTables) {
// If client-code does not select specific channels, default to all
// the channels in the refiner.
if (options.numFVarChannels==-1) {
_numChannels = refiner.GetNumFVarChannels();
_channelIndices = 0;
} else {
assert(options.numFVarChannels<=refiner.GetNumFVarChannels());
_numChannels = options.numFVarChannels;
_channelIndices = options.fvarChannelIndices;
}
} else {
_numChannels = 0;
}
_currentChannel = this->begin();
}
// Increment cursor
FVarChannelCursor & operator++() {
++_currentChannel;
return *this;
}
// Assign a position to a cursor
FVarChannelCursor & operator = (int currentChannel) {
_currentChannel = currentChannel;
return *this;
}
// Compare cursor positions
bool operator != (int pos) {
return _currentChannel < pos;
}
// Return FVar channel index in the TopologyRefiner list
// XXXX use something better than dereferencing operator maybe ?
int operator*() {
assert(_currentChannel<_numChannels);
// If the cursor is iterating over a sub-set of channels, return the
// channel index from the sub-set, otherwise use the current cursor
// position as channel index.
return _channelIndices ?
_channelIndices[_currentChannel] : _currentChannel;
}
int pos() { return _currentChannel; }
int begin() { return 0; }
int end() { return _numChannels; }
int size() { return _numChannels; }
private:
int _numChannels, // total number of channels
_currentChannel; // current cursor position
int const * _channelIndices; // list of selected channel indices
};
//
// Adaptive Context
//
// Helper class aggregating transient contextual data structures during the
// creation of feature adaptive patch tables. The structure simplifies
// the function prototypes of high-level private methods in the factory.
// This helps keeping the factory class stateless.
//
// Note : struct members are not re-entrant nor are they intended to be !
//
struct PatchTablesFactory::AdaptiveContext {
public:
AdaptiveContext(TopologyRefiner const & refiner, Options options);
TopologyRefiner const & refiner;
Options const options;
// The patch tables being created
PatchTables * tables;
public:
//
// Vertex
//
// True if the factory needs to create "legacy" Gregory patches (GREGORY,
// GREGORY_BOUNDARY types)
bool RequiresLegacyGregoryPatches() const;
// True if the factory needs to create Gregory patches (GREGORY_BASIS type)
bool RequiresGregoryBasisPatches() const;
// Counters accumulating each type of patches during topology traversal
PatchTypes<int> patchInventory;
// Bit tags accumulating patch attributes during topology traversal
PatchTagVector patchTags;
public:
//
// Face-varying
//
// True if face-varying patches need to be generated for this topology
bool RequiresFVarPatches() const;
// A cursor to iterate through the face-varying channels requested
// by client-code
FVarChannelCursor fvarChannelCursor;
// Allocate temporary space to store face-varying values : because we do
// not know yet the types of each patch, we pre-emptively allocate
// non-sparse arrays for each channel. Patches are assumed to have a maximum
// of fvarPatchSize CVs).
void AllocateFVarPatchValues(int npatches);
static const int fvarPatchSize = 16;
// We need temporary storage space to accumulate fvar values as we sort the
// vertices of the adapative cubic patches. FVar patch types do not match
// vertex patch types, and unfortunately we cannot generate offsets for a
// given patch until we have traversed the entire adaptive hierarchy. Instead
// of incurring another full hierarchy traversal, we store the FVar values
// in a temporary array with patches of fixed size. Once the values have been
// populated (in the correct sorted order), we copy them in the final sparse
// vectors and generate offsets.
std::vector<std::vector<Index> > fvarPatchValues;
};
// Constructor
PatchTablesFactory::AdaptiveContext::AdaptiveContext(
TopologyRefiner const & ref, Options opts) :
refiner(ref), options(opts), tables(0), fvarChannelCursor(ref, opts) {
fvarPatchValues.resize(fvarChannelCursor.size());
}
void
PatchTablesFactory::AdaptiveContext::AllocateFVarPatchValues(int npatches) {
FVarChannelCursor & fvc = fvarChannelCursor;
for (fvc=fvc.begin(); fvc!=fvc.end(); ++fvc) {
Sdc::Options::FVarLinearInterpolation interpolation =
refiner.GetFVarLinearInterpolation(*fvc);
// the LINEAR_ALL rule can populate values immediately (all quads) so
// we do not need this temporary storage
if (interpolation != Sdc::Options::FVAR_LINEAR_ALL) {
fvarPatchValues[fvc.pos()].resize(npatches*fvarPatchSize);
}
}
}
bool
PatchTablesFactory::AdaptiveContext::RequiresLegacyGregoryPatches() const {
return (patchInventory.G>0) or (patchInventory.GB>0);
}
bool
PatchTablesFactory::AdaptiveContext::RequiresGregoryBasisPatches() const {
return (patchInventory.GP>0);
}
bool
PatchTablesFactory::AdaptiveContext::RequiresFVarPatches() const {
return not fvarPatchValues.empty();
}
//
// Reserves tables based on the contents of the PatchArrayVector in the PatchTables:
//
void
PatchTablesFactory::allocateVertexTables(PatchTables * tables, int /* nlevels */, bool hasSharpness) {
int ncvs = 0, npatches = 0;
for (int i=0; i<tables->GetNumPatchArrays(); ++i) {
npatches += tables->GetNumPatches(i);
ncvs += tables->GetNumControlVertices(i);
}
if (ncvs==0 or npatches==0)
return;
tables->_patchVerts.resize( ncvs );
tables->_paramTable.resize( npatches );
if (hasSharpness) {
tables->_sharpnessIndices.resize( npatches, Vtr::INDEX_INVALID );
}
}
//
// Allocate face-varying tables
//
void
PatchTablesFactory::allocateFVarChannels(TopologyRefiner const & refiner,
Options options, int npatches, PatchTables * tables) {
assert(options.generateFVarTables and
refiner.GetNumFVarChannels()>0 and npatches>0 and tables);
// Create a channel cursor to iterate over client-selected channels or
// default to the channels found in the TopologyRefiner
FVarChannelCursor fvc(refiner, options);
if (fvc.size()==0) {
return;
}
tables->allocateFVarPatchChannels(fvc.size());
// Iterate with the cursor to initialize each channel
for (fvc=fvc.begin(); fvc!=fvc.end(); ++fvc) {
Sdc::Options::FVarLinearInterpolation interpolation =
refiner.GetFVarLinearInterpolation(*fvc);
tables->setFVarPatchChannelLinearInterpolation(fvc.pos(), interpolation);
int nverts = 0;
if (interpolation==Sdc::Options::FVAR_LINEAR_ALL) {
PatchDescriptor::Type type = options.triangulateQuads ?
PatchDescriptor::TRIANGLES : PatchDescriptor::QUADS;
tables->setFVarPatchChannelPatchesType(fvc.pos(), type);
nverts =
npatches * PatchDescriptor::GetNumFVarControlVertices(type);
}
tables->allocateChannelValues(fvc.pos(), npatches, nverts);
}
}
// gather face-varying patch points
inline int
PatchTablesFactory::gatherFVarData(AdaptiveContext & context, int level,
Index faceIndex, Index levelFaceOffset, int rotation,
Index const * levelFVarVertOffsets, Index fofss, Index ** fptrs) {
if (not context.RequiresFVarPatches()) {
return 0;
}
TopologyRefiner const & refiner = context.refiner;
PatchTables * tables = context.tables;
assert((levelFaceOffset + faceIndex)<(int)context.patchTags.size());
PatchFaceTag & vertexPatchTag = context.patchTags[levelFaceOffset + faceIndex];
Index patchVerts[context.fvarPatchSize];
// Iterate over valid FVar channels (if any)
FVarChannelCursor & fvc = context.fvarChannelCursor;
for (fvc=fvc.begin(); fvc!=fvc.end(); ++fvc) {
Vtr::Level const & vtxLevel = refiner.getLevel(level);
Vtr::FVarLevel const & fvarLevel = vtxLevel.getFVarLevel(*fvc);
if (refiner.GetFVarLinearInterpolation(*fvc)!=Sdc::Options::FVAR_LINEAR_ALL) {
//
// Bi-cubic patches
//
// If the face-varying topology matches the vertex topology (which should be the
// dominant case), we can use the patch tag for the original vertex patch --
// quickly check the composite tag for the face-varying values at the corners:
//
PatchFaceTag fvarPatchTag = vertexPatchTag;
ConstIndexArray faceVerts = vtxLevel.getFaceVertices(faceIndex),
fvarValues = fvarLevel.getFaceValues(faceIndex);
Vtr::FVarLevel::ValueTag compFVarTagsForFace =
fvarLevel.getFaceCompositeValueTag(fvarValues, faceVerts);
if (compFVarTagsForFace.isMismatch()) {
// At least one of the corner vertices has differing topology in FVar space,
// so we need to perform similar analysis to what was done to determine the
// face's original patch tag to determine the face-varying patch tag here.
//
// Recall how that patch tag is initialized:
// - a "composite" (bitwise-OR) tag of the face's VTags is taken
// - if determined to be on a boundary, a "boundary mask" is built and
// passed to the PatchFaceTag to determine boundary orientation
// - when necessary, a "composite" tag for the face's ETags is inspected
// - special case for "single-crease patch"
// - special case for "approx smooth corner with regular patch"
//
// Note differences here (simplifications):
// - we don't need to deal with the single-crease patch case:
// - if vertex patch was single crease the mismatching FVar patch
// cannot be
// - the fvar patch cannot become single-crease patch as only sharp
// (discts) edges are introduced, which are now boundary edges
// - the "approx smooth corner with regular patch" case was ignored:
// - its unclear if it should persist for the vertex patch
//
// As was the case with the vertex patch, since we are creating a patch it
// is assumed that all required isolation has occurred. For example, a
// regular patch at level 0 that has a FVar patch with too many boundaries
// (or local xordinary vertices) is going to cause trouble here...
//
//
// Gather the VTags for the four corners of the FVar patch (these are the VTag
// of each vertex merged with the FVar tag of its value) while computing the
// composite VTag:
//
Vtr::Level::VTag fvarVertTags[4];
Vtr::Level::VTag compFVarVTag =
fvarLevel.getFaceCompositeValueAndVTag(fvarValues, faceVerts, fvarVertTags);
//
// Clear/re-initialize the FVar patch tag and compute the appropriate boundary
// masks if boundary orientation is necessary:
//
fvarPatchTag.clear();
fvarPatchTag._hasPatch = true;
fvarPatchTag._isRegular = not compFVarVTag._xordinary;
if (compFVarVTag._boundary) {
Vtr::Level::ETag fvarEdgeTags[4];
ConstIndexArray faceEdges = vtxLevel.getFaceEdges(faceIndex);
Vtr::Level::ETag compFVarETag =
fvarLevel.getFaceCompositeCombinedEdgeTag(faceEdges, fvarEdgeTags);
if (compFVarETag._boundary) {
int boundaryEdgeMask = (fvarEdgeTags[0]._boundary << 0) |
(fvarEdgeTags[1]._boundary << 1) |
(fvarEdgeTags[2]._boundary << 2) |
(fvarEdgeTags[3]._boundary << 3);
fvarPatchTag.assignBoundaryPropertiesFromEdgeMask(boundaryEdgeMask);
} else {
int boundaryVertMask = (fvarVertTags[0]._boundary << 0) |
(fvarVertTags[1]._boundary << 1) |
(fvarVertTags[2]._boundary << 2) |
(fvarVertTags[3]._boundary << 3);
fvarPatchTag.assignBoundaryPropertiesFromVertexMask(boundaryVertMask);
}
}
}
//
// Determine and assign the type of the patch
//
PatchDescriptor::Type fvarPatchType = PatchDescriptor::REGULAR;
if (not fvarPatchTag._isRegular) {
// because we do not want to have to generate vertex-valence
// & quad-offset tables for each fvar channel, we default to
// Gregory-basis type patchs only (and use stencils to
// compute the 20 cvs basis)
fvarPatchType = context.options.useFVarQuadEndCaps ?
PatchDescriptor::QUADS : PatchDescriptor::GREGORY_BASIS;
} else if (fvarPatchTag._boundaryCount > 1) {
fvarPatchType = PatchDescriptor::CORNER;
} else if (fvarPatchTag._boundaryCount == 1) {
fvarPatchType = PatchDescriptor::BOUNDARY;
} else if (fvarPatchTag._isSingleCrease) {
fvarPatchType = PatchDescriptor::REGULAR;
}
Vtr::Array<PatchDescriptor::Type> patchTypes =
tables->getFVarPatchTypes(fvc.pos());
assert(not patchTypes.empty());
patchTypes[fofss] = fvarPatchType;
int const * permutation = 0;
// Gather the verts FVar values
// XXXX Patch verts should be rotated to match boundary / corner
// edges. Transition patterns should not be a concern, however
// we need to match parametric space, so this may need to be
// revisited...
int orientationIndex = fvarPatchTag._boundaryIndex;
if (fvarPatchType == PatchDescriptor::REGULAR) {
static int const permuteRegular[16] = { 5, 6, 7, 8, 4, 0, 1, 9, 15, 3, 2, 10, 14, 13, 12, 11 };
vtxLevel.gatherQuadRegularInteriorPatchPoints(faceIndex, patchVerts, orientationIndex, *fvc);
permutation = permuteRegular;
} else if (fvarPatchType == PatchDescriptor::CORNER) {
static int const permuteCorner[9] = { 8, 3, 0, 7, 2, 1, 6, 5, 4 };
vtxLevel.gatherQuadRegularCornerPatchPoints(faceIndex, patchVerts, orientationIndex, *fvc);
permutation = permuteCorner;
} else if (fvarPatchType == PatchDescriptor::BOUNDARY) {
static int const permuteBoundary[12] = { 11, 3, 0, 4, 10, 2, 1, 5, 9, 8, 7, 6 };
vtxLevel.gatherQuadRegularBoundaryPatchPoints(faceIndex, patchVerts, orientationIndex, *fvc);
permutation = permuteBoundary;
} else if (fvarPatchType == PatchDescriptor::QUADS) {
vtxLevel.gatherQuadLinearPatchPoints(faceIndex, patchVerts, orientationIndex, *fvc);
permutation = 0;
} else if (fvarPatchType == PatchDescriptor::GREGORY_BASIS) {
// XXXX
// Gregory basis patch : we need to gather the vertices and
// generate the stencil. We can use the index in the vertex
// patch array to index the stencils.
assert(0);
} else {
// note : we do not plan on supporting direct evaluation types
// of Gregory patches, because they requre extremely inefficient
// quad-offset and vertex-valence data structures.
assert(0);
}
int nverts = PatchDescriptor::GetNumFVarControlVertices(fvarPatchType);
assert(nverts <= context.fvarPatchSize);
offsetAndPermuteIndices(patchVerts, nverts, levelFVarVertOffsets[fvc.pos()],
permutation, &context.fvarPatchValues[fvc.pos()][fofss*context.fvarPatchSize]);
} else {
//
// Bi-linear patches
//
ConstIndexArray fvarValues = fvarLevel.getFaceValues(faceIndex);
// Store verts values directly in non-sparse context channel arrays
for (int vert=0; vert<fvarValues.size(); ++vert) {
fptrs[fvc.pos()][vert] =
levelFVarVertOffsets[fvc.pos()] + fvarValues[(vert+rotation)%4];
}
fptrs[fvc.pos()]+=fvarValues.size();
}
}
return 1;
}
//
// Populates the face-varying data buffer 'coord' for the given face, returning
// a pointer to the next descriptor
//
PatchParam *
PatchTablesFactory::computePatchParam(TopologyRefiner const & refiner,
int depth, Vtr::Index faceIndex, int rotation,
PatchParam *coord) {
if (coord == NULL) return NULL;
// Move up the hierarchy accumulating u,v indices to the coarse level:
int childIndexInParent = 0,
u = 0,
v = 0,
ofs = 1;
bool nonquad = (refiner.GetFaceVertices(depth, faceIndex).size() != 4);
for (int i = depth; i > 0; --i) {
Vtr::Refinement const& refinement = refiner.getRefinement(i-1);
Vtr::Level const& parentLevel = refiner.getLevel(i-1);
Vtr::Index parentFaceIndex = refinement.getChildFaceParentFace(faceIndex);
childIndexInParent = refinement.getChildFaceInParentFace(faceIndex);
if (parentLevel.getFaceVertices(parentFaceIndex).size() == 4) {
switch ( childIndexInParent ) {
case 0 : break;
case 1 : { u+=ofs; } break;
case 2 : { u+=ofs; v+=ofs; } break;
case 3 : { v+=ofs; } break;
}
ofs = (unsigned short)(ofs << 1);
} else {
nonquad = true;
// If the root face is not a quad, we need to offset the ptex index
// CCW to match the correct child face
Vtr::ConstIndexArray children = refinement.getFaceChildFaces(parentFaceIndex);
for (int j=0; j<children.size(); ++j) {
if (children[j]==faceIndex) {
childIndexInParent = j;
break;
}
}
}
faceIndex = parentFaceIndex;
}
Vtr::Index ptexIndex = refiner.GetPtexIndex(faceIndex);
assert(ptexIndex!=-1);
if (nonquad) {
ptexIndex+=childIndexInParent;
--depth;
}
coord->Set(ptexIndex, (short)u, (short)v, (unsigned char) rotation, (unsigned char) depth, nonquad);
return ++coord;
}
#ifdef ENDCAP_TOPOPOLGY
// XXXX manuelk work in progress for end-cap topology gathering
//
// Populates the topology table used by Gregory-basis patches
//
// Note : 'faceIndex' values are expected to be sorted in ascending order !!!
// Note 2: this code attempts to identify basis vertices shared along
// gregory patch edges
static int
gatherGregoryBasisTopology(Vtr::Level const& level, Index faceIndex, int numVertices,
PatchFaceTag const * levelPatchTags,
bool skip[0], std::vector<Index> & basisIndices, PatchTables::PTable & topology) {
assert(not topology.empty());
Index * dest = &topology[basisIndices.size()*20];
assert(Vtr::INDEX_INVALID==0xFFFFFFFF);
memset(dest, 0xFF, 20*sizeof(Index));
IndexArray fedges = level.getFaceEdges(faceIndex);
assert(fedges.size()==4);
for (int i=0; i<4; ++i) {
Index edge = fedges[i],
adjface = 0;
{ // Gather adjacent faces
IndexArray adjfaces = level.getEdgeFaces(edge);
for (int i=0; i<adjfaces.size(); ++i) {
if (adjfaces[i]==faceIndex) {
// XXXX manuelk if 'edge' is non-manifold, arbitrarily pick the
// next face in the list of adjacent faces
adjface = (adjfaces[(i+1)%adjfaces.size()]);
break;
}
}
}
// We are looking for adjacent faces that:
// - exist (no boundary)
// - have alraedy been processed (known CV indices)
// - are also Gregory basis patches
if (adjface!=Vtr::INDEX_INVALID and (adjface < faceIndex) and
(not levelPatchTags[adjface]._isRegular)) {
IndexArray aedges = level.getFaceEdges(adjface);
int aedge = aedges.FindIndexIn4Tuple(edge);
assert(aedge!=Vtr::INDEX_INVALID);
// Find index of basis in the list of basis already generated
struct compare {
static int op(void const * a, void const * b) {
return *(Index *)a - *(Index *)b;
}
};
Index * ptr = (Index *)std::bsearch( &adjface, &basisIndices[0],
basisIndices.size(), sizeof(Index), compare::op);
int srcBasisIdx = ptr - &basisIndices[0];
assert(ptr and srcBasisIdx>=0 and srcBasisIdx<(int)basisIndices.size());
// Copy the indices of CVs from the face on the other side of the
// shared edge
static int const gregoryEdgeVerts[4][4] = { { 0, 1, 7, 5},
{ 5, 6, 12, 10},
{10, 11, 17, 15},
{15, 16, 2, 0} };
Index * src = &topology[srcBasisIdx*20];
for (int j=0; j<4; ++j) {
dest[i*4+j] = src[gregoryEdgeVerts[aedge][j]];
}
skip[i] = true;
} else {
skip[i] = false;
}
}
for (int i=0; i<20; ++i) {
if (dest[i]==Vtr::INDEX_INVALID) {
dest[i] = numVertices++;
}
}
basisIndices.push_back(faceIndex);
return numVertices;
}
#endif
//
// Indexing sharpnesses
//
inline int
assignSharpnessIndex(float sharpness, std::vector<float> & sharpnessValues) {
// linear search
for (int i=0; i<(int)sharpnessValues.size(); ++i) {
if (sharpnessValues[i] == sharpness) {
return i;
}
}
sharpnessValues.push_back(sharpness);
return (int)sharpnessValues.size()-1;
}
//
// Populate the quad-offsets table used by Gregory patches
//
void
PatchTablesFactory::getQuadOffsets(
Vtr::Level const& level, Index faceIndex, unsigned int offsets[]) {
Vtr::ConstIndexArray fVerts = level.getFaceVertices(faceIndex);
for (int i = 0; i < 4; ++i) {
Vtr::Index vIndex = fVerts[i];
Vtr::ConstIndexArray vFaces = level.getVertexFaces(vIndex),
vEdges = level.getVertexEdges(vIndex);
int thisFaceInVFaces = -1;
for (int j = 0; j < vFaces.size(); ++j) {
if (faceIndex == vFaces[j]) {
thisFaceInVFaces = j;
break;
}
}
assert(thisFaceInVFaces != -1);
Index vOffsets[2];
vOffsets[0] = thisFaceInVFaces;
vOffsets[1] = (thisFaceInVFaces + 1)%vEdges.size();
// we have to use the number of incident edges to modulo the local index
// because there could be 2 consecutive edges in the face belonging to
// the Gregory patch.
offsets[i] = vOffsets[0] | (vOffsets[1] << 8);
}
}
//
// We should be able to use a single Create() method for both the adaptive and uniform
// cases. In the past, more additional arguments were passed to the uniform version,
// but that may no longer be necessary (see notes in the uniform version below)...
//
PatchTables *
PatchTablesFactory::Create( TopologyRefiner const & refiner, Options options ) {
if (refiner.IsUniform()) {
return createUniform(refiner, options);
} else {
return createAdaptive(refiner, options);
}
}
PatchTables *
PatchTablesFactory::createUniform(TopologyRefiner const & refiner, Options options) {
assert(refiner.IsUniform());
// ensure that triangulateQuads is only set for quadrilateral schemes
options.triangulateQuads &= (refiner.GetSchemeType()==Sdc::SCHEME_BILINEAR or
refiner.GetSchemeType()==Sdc::SCHEME_CATMARK);
int maxvalence = refiner.GetMaxValence(),
maxlevel = refiner.GetMaxLevel(),
firstlevel = options.generateAllLevels ? 0 : maxlevel,
nlevels = maxlevel-firstlevel+1;
PatchDescriptor::Type ptype = PatchDescriptor::NON_PATCH;
if (options.triangulateQuads) {
ptype = PatchDescriptor::TRIANGLES;
} else {
switch (refiner.GetSchemeType()) {
case Sdc::SCHEME_BILINEAR :
case Sdc::SCHEME_CATMARK : ptype = PatchDescriptor::QUADS; break;
case Sdc::SCHEME_LOOP : ptype = PatchDescriptor::TRIANGLES; break;
}
}
assert(ptype!=PatchDescriptor::NON_PATCH);
//
// Create the instance of the tables and allocate and initialize its members.
//
PatchTables * tables = new PatchTables(maxvalence);
tables->_numPtexFaces = refiner.GetNumPtexFaces();
tables->reservePatchArrays(nlevels);
PatchDescriptor desc(ptype, PatchDescriptor::NON_TRANSITION, 0);
// generate patch arrays
for (int level=firstlevel, poffset=0, voffset=0; level<=maxlevel; ++level) {
int npatches = refiner.GetNumFaces(level);
if (refiner.HasHoles()) {
npatches -= refiner.GetNumHoles(level);
}
assert(npatches>=0);
if (options.triangulateQuads)
npatches *= 2;
if (level>=firstlevel) {
tables->pushPatchArray(desc, npatches, &voffset, &poffset, 0);
}
}
// Allocate various tables
allocateVertexTables( tables, 0, /*hasSharpness=*/false );
bool generateFVarPatches=false;
FVarChannelCursor fvc(refiner, options);
if (options.generateFVarTables and fvc.size()>0) {
int npatches = tables->GetNumPatchesTotal();
allocateFVarChannels(refiner, options, npatches, tables);
assert(fvc.size() == tables->GetNumFVarChannels());
}
//
// Now populate the patches:
//
Index * iptr = &tables->_patchVerts[0];
PatchParam * pptr = &tables->_paramTable[0];
Index ** fptr = 0;
Index levelVertOffset = options.generateAllLevels ?
0 : refiner.GetNumVertices(0);
Index * levelFVarVertOffsets = 0;
if (generateFVarPatches) {
levelFVarVertOffsets = (Index *)alloca(fvc.size()*sizeof(Index));
memset(levelFVarVertOffsets, 0, fvc.size()*sizeof(Index));
fptr = (Index **)alloca(fvc.size()*sizeof(Index *));
for (fvc=fvc.begin(); fvc!=fvc.end(); ++fvc) {
fptr[fvc.pos()] = tables->getFVarPatchesValues(fvc.pos()).begin();
}
}
for (int level=1; level<=maxlevel; ++level) {
int nfaces = refiner.GetNumFaces(level);
if (level>=firstlevel) {
for (int face=0; face<nfaces; ++face) {
if (refiner.HasHoles() and refiner.IsFaceHole(level, face)) {
continue;
}
ConstIndexArray fverts = refiner.GetFaceVertices(level, face);
for (int vert=0; vert<fverts.size(); ++vert) {
*iptr++ = levelVertOffset + fverts[vert];
}
pptr = computePatchParam(refiner, level, face, /*rot*/0, pptr);
if (generateFVarPatches) {
for (fvc=fvc.begin(); fvc!=fvc.end(); ++fvc) {
ConstIndexArray fvalues = refiner.GetFVarFaceValues(level, face, *fvc);
for (int vert=0; vert<fvalues.size(); ++vert) {
assert((levelVertOffset + fvalues[vert]) < (int)tables->getFVarPatchesValues(fvc.pos()).size());
fptr[fvc.pos()][vert] = levelFVarVertOffsets[fvc.pos()] + fvalues[vert];
}
fptr[fvc.pos()]+=fvalues.size();
}
}
if (options.triangulateQuads) {
// Triangulate the quadrilateral: {v0,v1,v2,v3} -> {v0,v1,v2},{v3,v0,v2}.
*iptr = *(iptr - 4); // copy v0 index
++iptr;
*iptr = *(iptr - 3); // copy v2 index
++iptr;
*pptr = *(pptr - 1); // copy first patch param
++pptr;
if (generateFVarPatches) {
for (fvc=fvc.begin(); fvc!=fvc.end(); ++fvc) {
*fptr[fvc.pos()] = *(fptr[fvc.pos()]-4); // copy fv0 index
++fptr[fvc.pos()];
*fptr[fvc.pos()] = *(fptr[fvc.pos()]-3); // copy fv2 index
++fptr[fvc.pos()];
}
}
}
}
}
if (options.generateAllLevels) {
levelVertOffset += refiner.GetNumVertices(level);
for (fvc=fvc.begin(); fvc!=fvc.end(); ++fvc) {
levelFVarVertOffsets[fvc.pos()] += refiner.GetNumFVarValues(level, fvc.pos());
}
}
}
return tables;
}
PatchTables *
PatchTablesFactory::createAdaptive(TopologyRefiner const & refiner, Options options) {
assert(not refiner.IsUniform());
AdaptiveContext context(refiner, options);
//
// First identify the patches -- accumulating the inventory patches for all of the
// different types and information about the patch for each face:
//
identifyAdaptivePatches(context);
//
// Create the instance of the tables and allocate and initialize its members based on
// the inventory of patches determined above:
//
int maxValence = refiner.GetMaxValence();
context.tables = new PatchTables(maxValence);
// Populate the patch array descriptors
context.tables->reservePatchArrays(context.patchInventory.getNumPatchArrays());
// Sort through the inventory and push back non-empty patch arrays
ConstPatchDescriptorArray const & descs =
PatchDescriptor::GetAdaptivePatchDescriptors(Sdc::SCHEME_CATMARK);
int voffset=0, poffset=0, qoffset=0;
for (int i=0; i<descs.size(); ++i) {
PatchDescriptor desc = descs[i];
context.tables->pushPatchArray(desc,
context.patchInventory.getValue(desc), &voffset, &poffset, &qoffset );
}
context.tables->_numPtexFaces = refiner.GetNumPtexFaces();
// Allocate various tables
bool hasSharpness = context.patchInventory.hasSingleCreasedPatches();
allocateVertexTables(context.tables, 0, hasSharpness);
if (context.RequiresFVarPatches()) {
int npatches = context.tables->GetNumPatchesTotal();
allocateFVarChannels(refiner, options, npatches, context.tables);
// Reserve temporary non-sparse storage for non-linear fvar channels.
// FVar Values for these channels are copied into the final
// FVarPatchChannel after the second traversal happens within the call to
// populateAdaptivePatches()
context.AllocateFVarPatchValues(npatches);
}
// Specifics for Gregory patches
if (context.RequiresLegacyGregoryPatches()) {
context.tables->_quadOffsetsTable.resize( context.patchInventory.G*4 + context.patchInventory.GB*4 );
}
//
// Now populate the patches:
//
populateAdaptivePatches(context);
return context.tables;
}
//
// Identify all patches required for faces at all levels -- accumulating the number of patches
// for each type, and retaining enough information for the patch for each face to populate it
// later with no additional analysis.
//
void
PatchTablesFactory::identifyAdaptivePatches(AdaptiveContext & context) {
TopologyRefiner const & refiner = context.refiner;
//
// Iterate through the levels of refinement to inspect and tag components with information
// relative to patch generation. We allocate all of the tags locally and use them to
// populate the patches once a complete inventory has been taken and all tables appropriately
// allocated and initialized:
//
// The first Level may have no Refinement if it is the only level -- similarly the last Level
// has no Refinement, so a single level is effectively the last, but with less information
// available in some cases, as it was not generated by refinement.
//
context.patchTags.resize(refiner.GetNumFacesTotal());
PatchFaceTag * levelPatchTags = &context.patchTags[0];
for (int levelIndex = 0; levelIndex < refiner.GetNumLevels(); ++levelIndex) {
Vtr::Level const * level = &refiner.getLevel(levelIndex);
//
// Given components at Level[i], we need to be looking at Refinement[i] -- and not
// [i-1] -- because the Refinement has transitional information for its parent edges
// and faces.
//
// For components in this level, we want to determine:
// - what Edges are "transitional" (already done in Refinement for parent)
// - what Faces are "transitional" (already done in Refinement for parent)
// - what Faces are "complete" (applied to this Level in previous refinement)
//
Vtr::Refinement const * refinement = 0;
Vtr::Refinement::SparseTag const * refinedFaceTags = 0;
if (levelIndex < refiner.GetMaxLevel()) {
refinement = &refiner.getRefinement(levelIndex);
refinedFaceTags = &refinement->_parentFaceTag[0];
}
for (int faceIndex = 0; faceIndex < level->getNumFaces(); ++faceIndex) {
PatchFaceTag & patchTag = levelPatchTags[faceIndex];
patchTag.clear();
patchTag._hasPatch = false;
if (level->isFaceHole(faceIndex)) {
continue;
}
//
// This face does not warrant a patch under the following conditions:
//
// - the face was fully refined into child faces
// - the face is not a quad (should have been refined, so assert)
// - the face is not "complete"
//
// The first is trivially determined, and the second is really redundant. The
// last -- "incompleteness" -- indicates a face that exists to support the limit
// of some neighboring component, and which does not have its own neighborhood
// fully defined for its limit. If any child vertex of a vertex of this face is
// "incomplete" (and all are tagged) the face must be "incomplete", so get the
// "composite" tag which combines bits for all vertices:
//
Vtr::Refinement::SparseTag refinedFaceTag = refinedFaceTags ?
refinedFaceTags[faceIndex] : Vtr::Refinement::SparseTag();
if (refinedFaceTag._selected) {
continue;
}
Vtr::ConstIndexArray fVerts = level->getFaceVertices(faceIndex);
assert(fVerts.size() == 4);
Vtr::Level::VTag compFaceVertTag = level->getFaceCompositeVTag(fVerts);
if (compFaceVertTag._incomplete) {
continue;
}
//
// We have a quad that will be represented as a B-spline or Gregory patch. Use
// the "composite" tag again to quickly determine if any vertex is irregular, on
// a boundary, non-manifold, etc.
//
// Inspect the edges for boundaries and transitional edges and pack results into
// 4-bit masks. We detect boundary edges rather than vertices as we hope to
// replace the mask in future with one for infinitely sharp edges -- allowing
// us to detect regular patches and avoid isolation. We still need to account
// for the irregular/xordinary case when a corner vertex is a boundary but there
// are no boundary edges.
//
// As for transition detection, assign the transition properties (even if 0) as
// their rotations override boundary rotations (when no transition)
//
// NOTE on patches around non-manifold vertices:
// In most the use of regular boundary or corner patches is what we want,
// but in some, i.e. when a non-manifold vertex is infinitely sharp, using
// such patches will create some discontinuities. At this point non-manifold
// support is still evolving and is not strictly defined, so this is left to
// a later date to resolve.
//
// NOTE on infinitely sharp (hard) edges:
// We should be able to adapt this later to detect hard (inf-sharp) edges
// rather than just boundary edges -- there is a similar tag per edge. That
// should allow us to generate regular patches for interior hard features.
//
bool hasBoundaryVertex = compFaceVertTag._boundary;
bool hasNonManifoldVertex = compFaceVertTag._nonManifold;
bool hasXOrdinaryVertex = compFaceVertTag._xordinary;
patchTag._hasPatch = true;
patchTag._isRegular = not hasXOrdinaryVertex or hasNonManifoldVertex;
// single crease patch optimization
if (context.options.useSingleCreasePatch and
not hasXOrdinaryVertex and not hasBoundaryVertex and not hasNonManifoldVertex) {
Vtr::ConstIndexArray fEdges = level->getFaceEdges(faceIndex);
Vtr::Level::ETag compFaceETag = level->getFaceCompositeETag(fEdges);
if (compFaceETag._semiSharp or compFaceETag._infSharp) {
float sharpness = 0;
int rotation = 0;
if (level->isSingleCreasePatch(faceIndex, &sharpness, &rotation)) {
// cap sharpness to the max isolation level
float cappedSharpness =
std::min(sharpness, (float)(context.options.maxIsolationLevel - levelIndex));
if (cappedSharpness > 0) {
patchTag._isSingleCrease = true;
patchTag._boundaryIndex = (rotation + 2) % 4;
}
}
}
}
// Identify boundaries for both regular and xordinary patches -- non-manifold
// edges and vertices are interpreted as boundaries for regular patches
if (hasBoundaryVertex or hasNonManifoldVertex) {
Vtr::ConstIndexArray fEdges = level->getFaceEdges(faceIndex);
int boundaryEdgeMask = ((level->_edgeTags[fEdges[0]]._boundary) << 0) |
((level->_edgeTags[fEdges[1]]._boundary) << 1) |
((level->_edgeTags[fEdges[2]]._boundary) << 2) |
((level->_edgeTags[fEdges[3]]._boundary) << 3);
if (hasNonManifoldVertex) {
int nonManEdgeMask = ((level->_edgeTags[fEdges[0]]._nonManifold) << 0) |
((level->_edgeTags[fEdges[1]]._nonManifold) << 1) |
((level->_edgeTags[fEdges[2]]._nonManifold) << 2) |
((level->_edgeTags[fEdges[3]]._nonManifold) << 3);
boundaryEdgeMask |= nonManEdgeMask;
}
if (boundaryEdgeMask) {
patchTag.assignBoundaryPropertiesFromEdgeMask(boundaryEdgeMask);
} else {
int boundaryVertMask = ((level->_vertTags[fVerts[0]]._boundary) << 0) |
((level->_vertTags[fVerts[1]]._boundary) << 1) |
((level->_vertTags[fVerts[2]]._boundary) << 2) |
((level->_vertTags[fVerts[3]]._boundary) << 3);
if (hasNonManifoldVertex) {
int nonManVertMask = ((level->_vertTags[fVerts[0]]._nonManifold) << 0) |
((level->_vertTags[fVerts[1]]._nonManifold) << 1) |
((level->_vertTags[fVerts[2]]._nonManifold) << 2) |
((level->_vertTags[fVerts[3]]._nonManifold) << 3);
boundaryVertMask |= nonManVertMask;
}
patchTag.assignBoundaryPropertiesFromVertexMask(boundaryVertMask);
}
}
// XXXX (barfowl) -- why are we approximating a smooth x-ordinary corner with
// a sharp corner patch? The boundary/corner points of the regular patch are
// not even made colinear to make it smoother. Something historical here...
//
// So this treatment may become optional in future and is bracketed with a
// condition now for that reason. We approximate x-ordinary smooth corners
// with regular B-spline patches instead of using a Gregory patch. The smooth
// corner must be properly isolated from any other irregular vertices (as it
// will be at any level > 1) otherwise the Gregory patch is necessary.
//
// This flag to be initialized with a future option... ?
bool approxSmoothCornerWithRegularPatch = true;
if (approxSmoothCornerWithRegularPatch) {
if (!patchTag._isRegular and (patchTag._boundaryCount == 2)) {
// We may have a sharp corner opposite/adjacent an xordinary vertex --
// need to make sure there is only one xordinary vertex and that it
// is the corner vertex.
if (levelIndex > 1) {
patchTag._isRegular = true;
} else {
int xordVertex = 0;
int xordCount = 0;
if (level->_vertTags[fVerts[0]]._xordinary) { xordCount++; xordVertex = 0; }
if (level->_vertTags[fVerts[1]]._xordinary) { xordCount++; xordVertex = 1; }
if (level->_vertTags[fVerts[2]]._xordinary) { xordCount++; xordVertex = 2; }
if (level->_vertTags[fVerts[3]]._xordinary) { xordCount++; xordVertex = 3; }
if (xordCount == 1) {
// We require the vertex opposite the xordinary vertex be interior:
if (not level->_vertTags[fVerts[(xordVertex + 2) % 4]]._boundary) {
patchTag._isRegular = true;
}
}
}
}
}
//
// Now that all boundary features have have been identified and tagged, assign
// the transition type for the patch before taking inventory.
//
// Identify and increment counts for regular patches (both non-transitional and
// transitional) and extra-ordinary patches (always non-transitional):
//
patchTag.assignTransitionPropertiesFromEdgeMask(refinedFaceTag._transitional);
if (patchTag._isRegular) {
int transIndex = patchTag._transitionType;
int transRot = patchTag._transitionRot;
if (!patchTag._isSingleCrease and patchTag._boundaryCount == 0) {
context.patchInventory.R[transIndex]++;
} else if (patchTag._isSingleCrease and patchTag._boundaryCount == 0) {
context.patchInventory.S[transIndex][transRot]++;
} else if (patchTag._boundaryCount == 1) {
context.patchInventory.B[transIndex][transRot]++;
} else {
context.patchInventory.C[transIndex][transRot]++;
}
} else {
// if end-cap patches use a stencils-driven basis, we don't need
// to track regular / boundary cases
if (not context.options.adaptiveStencilTables) {
if (patchTag._boundaryCount == 0) {
context.patchInventory.G++;
} else {
context.patchInventory.GB++;
}
} else {
context.patchInventory.GP++;
}
}
}
levelPatchTags += level->getNumFaces();
}
}
//
// Populate all adaptive patches now that the tables to hold data for them have been allocated.
// We need the inventory (counts per patch type) and the patch tags per face that were previously
// idenified.
//
void
PatchTablesFactory::populateAdaptivePatches(AdaptiveContext & context) {
TopologyRefiner const & refiner = context.refiner;
PatchTables * tables = context.tables;
//
// Setup convenience pointers at the beginning of each patch array for each
// table (patches, ptex)
//
PatchCVPointers iptrs;
PatchParamPointers pptrs;
PatchFVarOffsets fofss;
PatchFVarPointers fptrs;
SharpnessIndexPointers sptrs;
ConstPatchDescriptorArray const & descs =
PatchDescriptor::GetAdaptivePatchDescriptors(Sdc::SCHEME_CATMARK);
for (int i=0; i<descs.size(); ++i) {
PatchDescriptor desc = descs[i];
Index arrayIndex = tables->findPatchArray(desc);
if (arrayIndex==Vtr::INDEX_INVALID) {
continue;
}
iptrs.getValue(desc) = tables->getPatchArrayVertices(arrayIndex).begin();
pptrs.getValue(desc) = tables->getPatchParams(arrayIndex).begin();
if (context.patchInventory.hasSingleCreasedPatches()) {
sptrs.getValue(desc) = tables->getSharpnessIndices(arrayIndex);
}
if (context.RequiresFVarPatches()) {
Index & offsets = fofss.getValue(desc);
offsets = tables->getPatchIndex(arrayIndex, 0);
// XXXX manuelk this stuff will go away as we use offsets from FVarPatchChannel
FVarChannelCursor & fvc = context.fvarChannelCursor;
assert(fvc.size() == tables->GetNumFVarChannels());
Index ** fptr = (Index **)alloca(fvc.size()*sizeof(Index *));
for (fvc=fvc.begin(); fvc!=fvc.end(); ++fvc) {
Index pidx = tables->getPatchIndex(arrayIndex, 0);
int ofs = pidx * 4;
fptr[fvc.pos()] = &tables->getFVarPatchesValues(fvc.pos())[ofs];
}
fptrs.getValue(desc) = fptr;
}
}
unsigned int * quad_G_C0_P = context.patchInventory.G>0 ?
&tables->_quadOffsetsTable[0] : 0,
* quad_G_C1_P = context.patchInventory.GB>0 ?
&tables->_quadOffsetsTable[context.patchInventory.G*4] : 0;
std::vector<unsigned char> gregoryVertexFlags;
//
// To avoid gathering vertex neighborhoods for all vertices, identify vertices involved in
// gregory patches as the faces are traversed, to be gathered later:
//
bool hasGregoryPatches =
context.RequiresLegacyGregoryPatches() or context.RequiresGregoryBasisPatches();
GregoryBasisFactory * gregoryStencilsFactory = 0;
#ifdef ENDCAP_TOPOPOLGY
int numGregoryBasisVertices=0;
std::vector<Index> gregoryBasisIndices;
#endif
if (hasGregoryPatches) {
StencilTables const * adaptiveStencils = context.options.adaptiveStencilTables;
if (adaptiveStencils and context.RequiresGregoryBasisPatches()) {
assert(not context.RequiresLegacyGregoryPatches());
int maxvalence = refiner.GetMaxValence(),
npatches = context.patchInventory.GP;
gregoryStencilsFactory =
new GregoryBasisFactory(refiner, *adaptiveStencils, npatches, maxvalence);
#ifdef ENDCAP_TOPOPOLGY
gregoryBasisIndices.reserve(npatches);
tables->_endcapTopology.resize(npatches*20);
#endif
}
gregoryVertexFlags.resize(refiner.GetNumVerticesTotal(), false);
}
//
// Now iterate through the faces for all levels and populate the patches:
//
int levelFaceOffset = 0,
levelVertOffset = 0;
int * levelFVarVertOffsets = 0;
if (context.RequiresFVarPatches()) {
int nchannels = refiner.GetNumFVarChannels();
levelFVarVertOffsets = (int *)alloca(nchannels);
memset(levelFVarVertOffsets, 0, nchannels*sizeof(int));
}
for (int i = 0; i < refiner.GetNumLevels(); ++i) {
Vtr::Level const * level = &refiner.getLevel(i);
const PatchFaceTag * levelPatchTags = &context.patchTags[levelFaceOffset];
for (int faceIndex = 0; faceIndex < level->getNumFaces(); ++faceIndex) {
if (level->isFaceHole(faceIndex)) {
continue;
}
const PatchFaceTag& patchTag = levelPatchTags[faceIndex];
if (not patchTag._hasPatch) {
continue;
}
if (patchTag._isRegular) {
Index patchVerts[16];
int tIndex = patchTag._transitionType;
int rIndex = patchTag._transitionRot;
int bIndex = patchTag._boundaryIndex;
if (!patchTag._isSingleCrease and patchTag._boundaryCount == 0) {
int const permuteInterior[16] = { 5, 6, 7, 8, 4, 0, 1, 9, 15, 3, 2, 10, 14, 13, 12, 11 };
level->gatherQuadRegularInteriorPatchPoints(faceIndex, patchVerts, rIndex);
offsetAndPermuteIndices(patchVerts, 16, levelVertOffset, permuteInterior, iptrs.R[tIndex]);
iptrs.R[tIndex] += 16;
pptrs.R[tIndex] = computePatchParam(refiner, i, faceIndex, rIndex, pptrs.R[tIndex]);
fofss.R[tIndex] += gatherFVarData(context,
i, faceIndex, levelFaceOffset, rIndex, levelFVarVertOffsets, fofss.R[tIndex], fptrs.R[tIndex]);
} else {
// For the boundary and corner cases, the Hbr code makes some adjustments to the
// rotations here from the way they were defined earlier. That raises questions
// as to the purpose of the earlier assignments and their naming. I'd prefer to
// label the sets of rotations for their intended purpose, and to compute and
// assign them earlier for use here with no adjustment.
//
// Non-transition case:
// rot = 0; // outside switch
// f->_adaptiveFlags.brots = (f->_adaptiveFlags.rots + 1) % 4;
// Transition case:
// rot = f->_adaptiveFlags.brots; // is this now same as transition rots?
//
// Both cases of "rot" above are now handled with the "transition rotation" -- still
// not clear what the purpose of the other is. Need to look into usage of these
// adaptive-flag rotations in:
// getOneRing, computePatchParam, computeFVarData
// It may be that a separate "face rotation" flag is warranted if we need something
// else dependent on the boundary orientation.
//
if (patchTag._isSingleCrease and patchTag._boundaryCount==0) {
int const permuteInterior[16] = { 5, 6, 7, 8, 4, 0, 1, 9, 15, 3, 2, 10, 14, 13, 12, 11 };
level->gatherQuadRegularInteriorPatchPoints(faceIndex, patchVerts, bIndex);
offsetAndPermuteIndices(patchVerts, 16, levelVertOffset, permuteInterior, iptrs.S[tIndex][rIndex]);
int creaseEdge = (bIndex+2)%4;
float sharpness = level->getEdgeSharpness((level->getFaceEdges(faceIndex)[creaseEdge]));
sharpness = std::min(sharpness, (float)(context.options.maxIsolationLevel-i));
iptrs.S[tIndex][rIndex] += 16;
pptrs.S[tIndex][rIndex] = computePatchParam(refiner, i, faceIndex, bIndex, pptrs.S[tIndex][rIndex]);
*sptrs.S[tIndex][rIndex]++ = assignSharpnessIndex(sharpness, tables->_sharpnessValues);
fofss.S[tIndex][rIndex] += gatherFVarData(context,
i, faceIndex, levelFaceOffset, bIndex, levelFVarVertOffsets, fofss.S[tIndex][rIndex], fptrs.S[tIndex][rIndex]);
} else if (patchTag._boundaryCount == 1) {
int const permuteBoundary[12] = { 11, 3, 0, 4, 10, 2, 1, 5, 9, 8, 7, 6 };
level->gatherQuadRegularBoundaryPatchPoints(faceIndex, patchVerts, bIndex);
offsetAndPermuteIndices(patchVerts, 12, levelVertOffset, permuteBoundary, iptrs.B[tIndex][rIndex]);
iptrs.B[tIndex][rIndex] += 12;
pptrs.B[tIndex][rIndex] = computePatchParam(refiner, i, faceIndex, bIndex, pptrs.B[tIndex][rIndex]);
fofss.B[tIndex][rIndex] += gatherFVarData(context,
i, faceIndex, levelFaceOffset, bIndex, levelFVarVertOffsets, fofss.B[tIndex][rIndex], fptrs.B[tIndex][rIndex]);
} else {
int const permuteCorner[9] = { 8, 3, 0, 7, 2, 1, 6, 5, 4 };
level->gatherQuadRegularCornerPatchPoints(faceIndex, patchVerts, bIndex);
offsetAndPermuteIndices(patchVerts, 9, levelVertOffset, permuteCorner, iptrs.C[tIndex][rIndex]);
bIndex = (bIndex+3)%4;
iptrs.C[tIndex][rIndex] += 9;
pptrs.C[tIndex][rIndex] = computePatchParam(refiner, i, faceIndex, bIndex, pptrs.C[tIndex][rIndex]);
fofss.C[tIndex][rIndex] += gatherFVarData(context,
i, faceIndex, levelFaceOffset, bIndex, levelFVarVertOffsets, fofss.C[tIndex][rIndex], fptrs.C[tIndex][rIndex]);
}
}
} else {
if (gregoryStencilsFactory) {
// Gregory basis end-cap (20 CVs - no quad-offsets / valence tables)
assert(i==refiner.GetMaxLevel());
// Gregory Boundary Patch (4 CVs 0-ring for varying interpolation)
Vtr::ConstIndexArray faceVerts = level->getFaceVertices(faceIndex);
for (int j = 0; j < 4; ++j) {
iptrs.GP[j] = faceVerts[j] + levelVertOffset;
gregoryVertexFlags[iptrs.GP[j]] = true;
}
iptrs.GP += 4;
#ifdef ENDCAP_TOPOPOLGY
bool edgeSkip[4];
numGregoryBasisVertices = gatherGregoryBasisTopology(*level, faceIndex, numGregoryBasisVertices,
levelPatchTags, edgeSkip, gregoryBasisIndices, tables->_endcapTopology);
#endif
gregoryStencilsFactory->AddPatchBasis(faceIndex);
pptrs.GP = computePatchParam(refiner, i, faceIndex, 0, pptrs.GP);
fofss.GP += gatherFVarData(context,
i, faceIndex, levelFaceOffset, 0, levelFVarVertOffsets, fofss.GP, fptrs.GP);
} else {
if (patchTag._boundaryCount == 0) {
// Gregory Regular Patch (4 CVs + quad-offsets / valence tables)
Vtr::ConstIndexArray faceVerts = level->getFaceVertices(faceIndex);
for (int j = 0; j < 4; ++j) {
iptrs.G[j] = faceVerts[j] + levelVertOffset;
gregoryVertexFlags[iptrs.G[j]] = true;
}
iptrs.G += 4;
getQuadOffsets(*level, faceIndex, quad_G_C0_P);
quad_G_C0_P += 4;
pptrs.G = computePatchParam(refiner, i, faceIndex, 0, pptrs.G);
fofss.G += gatherFVarData(context,
i, faceIndex, levelFaceOffset, 0, levelFVarVertOffsets, fofss.G, fptrs.G);
} else {
// Gregory Boundary Patch (4 CVs + quad-offsets / valence tables)
Vtr::ConstIndexArray faceVerts = level->getFaceVertices(faceIndex);
for (int j = 0; j < 4; ++j) {
iptrs.GB[j] = faceVerts[j] + levelVertOffset;
gregoryVertexFlags[iptrs.GB[j]] = true;
}
iptrs.GB += 4;
getQuadOffsets(*level, faceIndex, quad_G_C1_P);
quad_G_C1_P += 4;
//int bIndex = (patchTag._boundaryIndex+1)%4;
pptrs.GB = computePatchParam(refiner, i, faceIndex, 0, pptrs.GB);
fofss.GB += gatherFVarData(context,
i, faceIndex, levelFaceOffset, 0, levelFVarVertOffsets, fofss.GB, fptrs.GB);
}
}
}
}
levelFaceOffset += level->getNumFaces();
levelVertOffset += level->getNumVertices();
if (context.RequiresFVarPatches()) {
int nchannels = refiner.GetNumFVarChannels();
for (int channel=0; channel<nchannels; ++channel) {
levelFVarVertOffsets[channel] += level->getNumFVarValues(channel);
}
}
}
if (gregoryStencilsFactory) {
tables->_endcapStencilTables =
gregoryStencilsFactory->CreateStencilTables();
delete gregoryStencilsFactory;
}
if (context.RequiresFVarPatches()) {
// Compress & copy FVar values from context into FVarPatchChannel
// sparse array, generate offsets
FVarChannelCursor & fvc = context.fvarChannelCursor;
for (fvc=fvc.begin(); fvc!=fvc.end(); ++fvc) {
if (tables->GetFVarChannelLinearInterpolation(fvc.pos())!=Sdc::Options::FVAR_LINEAR_ALL) {
tables->setBicubicFVarPatchChannelValues(fvc.pos(),
context.fvarPatchSize, context.fvarPatchValues[fvc.pos()]);
}
}
}
//
// Now deal with the "vertex valence" table for Gregory patches -- this table contains the one-ring
// of vertices around each vertex. Currently it is extremely wasteful for the following reasons:
// - it allocates 2*maxvalence+1 for ALL vertices
// - it initializes the one-ring for ALL vertices
// We use the full size expected (not sure what else relies on that) but we avoiding initializing
// the vast majority of vertices that are not associated with gregory patches -- by having previously
// marked those that are associated above and skipping all others.
//
if (context.RequiresLegacyGregoryPatches()) {
const int SizePerVertex = 2*tables->_maxValence + 1;
std::vector<Index> & vTable = tables->_vertexValenceTable;
vTable.resize(refiner.GetNumVerticesTotal() * SizePerVertex);
int vOffset = 0;
int levelLast = refiner.GetMaxLevel();
for (int i = 0; i <= levelLast; ++i) {
Vtr::Level const * level = &refiner.getLevel(i);
if (i == levelLast) {
int vTableOffset = vOffset * SizePerVertex;
for (int vIndex = 0; vIndex < level->getNumVertices(); ++vIndex) {
int* vTableEntry = &vTable[vTableOffset];
//
// If not marked as a vertex of a gregory patch, just set to 0 to ignore. Otherwise
// gather the one-ring around the vertex and set its resulting size (note the negative
// size used to distinguish between boundary/interior):
//
//if (!gregoryVertexFlags[vIndex + vOffset]) {
vTableEntry[0] = 0;
//} else {
int * ringDest = vTableEntry + 1,
ringSize = level->gatherQuadRegularRingAroundVertex(vIndex, ringDest);
for (int j = 0; j < ringSize; ++j) {
ringDest[j] += vOffset;
}
if (ringSize & 1) {
// boundary vertex : duplicate boundary vertex index
// and store negative valence.
ringSize++;
vTableEntry[ringSize]=vTableEntry[ringSize-1];
vTableEntry[0] = -ringSize/2;
} else {
vTableEntry[0] = ringSize/2;
}
//}
vTableOffset += SizePerVertex;
}
}
vOffset += level->getNumVertices();
}
}
}
} // end namespace Far
} // end namespace OPENSUBDIV_VERSION
} // end namespace OpenSubdiv