This adds a new C API for SPIRV-Cross which is intended to be stable,
both API and ABI wise.
The C++ API has been refactored a bit to make the C wrapper easier and
cleaner to write. Especially the vertex attribute / resource interfaces
for MSL has been rewritten to avoid taking mutable pointers into the
interface. This would be very annoying to wrap and it didn't fit well
with the rest of the C++ API to begin with. While doing this, I went
ahead and removed all the old deprecated interfaces.
The CMake build system has also seen an overhaul.
It is now possible to build static/shared/CLI separately with -D
options.
The shared library only exposes the C API, as it is the only ABI-stable
API. pkg-configs as well as CMake modules are exported and installed for
the shared library configuration.
The tessellation levels in Metal are stored as a densely-packed array of
half-precision floating point values. But, stage-in attributes in Metal
have to have offsets and strides aligned to a multiple of four, so we
can't add them individually. Luckily for us, the arrays have lengths
less than 4. So, let's use vectors for them!
Triangles get a single attribute with a `float4`, where the outer levels
are in `.xyz` and the inner levels are in `.w`. The arrays are unpacked
as though we had added the elements individually. Quads get two: a
`float4` with the outer levels and a `float2` with the inner levels.
Further, since vectors can be indexed as arrays, there's no need to
unpack them in this case.
This also saves on precious vertex attributes. Before, we were using up
to 6 of them. Now we need two at most.
Builtin attributes in SPIR-V aren't linked by location, but by their
built-in-ness. This poses a problem for MSL, since builtin inputs in
the vertex pipeline are just regular attributes. We must then assign
them locations so that they can be matched up to the attributes in the
stage input descriptor--and also to avoid duplicate attribute numbers in
tessellation evaluation shaders, where there are two different
stage-in structs, so the member index therein is no longer unique!
In SPIR-V, there are always two inner levels and four outer levels, even
if the input patch isn't a quad patch. But in MSL, due to requirements
imposed by Metal, only one inner level and three outer levels exist when
the input patch is a triangle patch. We must explicitly ignore any write
to the nonexistent second inner and fourth outer levels in this case.
This is intended to be used to support `VK_KHR_maintenance2`'s
tessellation domain origin feature. If `tess_domain_origin_lower_left`
is `true`, the `v` coordinate will be inverted with respect to the
domain. Additionally, in `Triangles` mode, the `v` and `w` coordinates
will be swapped. This is because the winding order is interpreted
differently in lower-left mode.
These are mapped to Metal's post-tessellation vertex functions. The
semantic difference is much less here, so this change should be simpler
than the previous one. There are still some hairy parts, though.
In MSL, the array of control point data is represented by a special
type, `patch_control_point<T>`, where `T` is a valid stage-input type.
This object must be embedded inside the patch-level stage input. For
this reason, I've added a new type to the type system to represent this.
On Mac, the number of input control points to the function must be
specified in the `patch()` attribute. This is optional on iOS.
SPIRV-Cross takes this from the `OutputVertices` execution mode; the
intent is that if it's not set in the shader itself, MoltenVK will set
it from the tessellation control shader. If you're translating these
offline, you'll have to update the control point count manually, since
this number must match the number that is passed to the
`drawPatches:...` family of methods.
Fixes#120.
These are transpiled to kernel functions that write the output of the
shader to three buffers: one for per-vertex varyings, one for per-patch
varyings, and one for the tessellation levels. This structure is
mandated by the way Metal works, where the tessellation factors are
supplied to the draw method in their own buffer, while the per-patch and
per-vertex varyings are supplied as though they were vertex attributes;
since they have different step rates, they must be in separate buffers.
The kernel is expected to be run in a workgroup whose size is the
greater of the number of input or output control points. It uses Metal's
support for vertex-style stage input to a compute shader to get the
input values; therefore, at least one instance must run per input point.
Meanwhile, Vulkan mandates that it run at least once per output point.
Overrunning the output array is a concern, but any values written should
either be discarded or overwritten by subsequent patches. I'm probably
going to put some slop space in the buffer when I integrate this into
MoltenVK to be on the safe side.
This is necessary to deal with indirect draws, where the draw parameters
are given in a buffer instead of passed by the CPU. For normal draws,
the draw parameters are set with Metal's `setVertexBytes:` method.
This undoes the change to add the vertex count to the aux buffer,
rendering that entire discussion largely moot. Oh well. It was a
discussion that needed to happen anyway.
In the past, SPIRV-Cross threw an error in this case because it couldn't
work out which swizzle from the auxiliary buffer needs to be passed.
Now, we pass the swizzle around with the texture object, like a combined
image-sampler and its associated sampler.
If not enough components are provided in the shader,
the shader MSL compiler throws an error rather than make components
undefined. This hurts portability, so we need to add explicit padding
here.
This is a fairly fundamental change on how IDs are handled.
It serves many purposes:
- Improve performance. We only need to iterate over IDs which are
relevant at any one time.
- Makes sure we iterate through IDs in SPIR-V module declaration order
rather than ID space. IDs don't have to be monotonically increasing,
which was an assumption SPIRV-Cross used to have. It has apparently
never been a problem until now.
- Support LUTs of structs. We do this by interleaving declaration of
constants and struct types in SPIR-V module order.
To support this, the ParsedIR interface needed to change slightly.
Before setting any ID with variant_set<T> we let ParsedIR know
that an ID with a specific type has been added. The surface for change
should be minimal.
ParsedIR will maintain a per-type list of IDs which the cross-compiler
will need to consider for later.
Instead of looping over ir.ids[] (which can be extremely large), we loop
over types now, using:
ir.for_each_typed_id<SPIRVariable>([&](uint32_t id, SPIRVariable &var) {
handle_variable(var);
});
Now we make sure that we're never looking at irrelevant types.
This allows shaders to declare and use pointer-type variables. Pointers
may be loaded and stored, be the result of an `OpSelect`, be passed to
and returned from functions, and even be passed as inputs to the `OpPhi`
instruction. All types of pointers may be used as variable pointers.
Variable pointers to storage buffers and workgroup memory may even be
loaded from and stored to, as though they were ordinary variables. In
addition, this enables using an interior pointer to an array as though
it were an array pointer itself using the `OpPtrAccessChain`
instruction.
This is a rather large and involved change, mostly because this is
somewhat complicated with a lot of moving parts. It's a wonder
SPIRV-Cross's output is largely unchanged. Indeed, many of these changes
are to accomplish exactly that! Perhaps the largest source of changes
was the violation of the assumption that, when emitting types, the
pointer type didn't matter.
One of the test cases added by the change doesn't optimize very well;
the output of `spirv-opt` here is invalid SPIR-V. I need to file a bug
with SPIRV-Tools about this.
I wanted to test that variable pointers to images worked too, but I
couldn't figure out how to propagate the access qualifier properly--in
MSL, it's part of the type, so getting this right is important. I've
punted on that for now.
Based on a patch by Stefan Dösinger.
Metal cannot do signedness conversion on vertex attributes, and for good
reason. Putting a `uint4` into an `int4`, or a `char4` into a `uint4`,
would lose those values that are outside the range of the target type.
But putting a `uchar4` into a `short4` or an `int4`, or a `ushort4` into
an `int4`, should work. In that case, force the signedness in the shader
to match the declared type of the host.
Unfortunately, I don't really know how to automatically test this. This
remapping is done based on input parameters normally supplied by
MoltenVK. I'm not sure how we'd set this up for the command-line
`spirv-cross` tool.
When trying to validate buffer sizes, we usually need to bail out when
using SpecConstantOps, but for some very specific cases where we allow
unsized arrays currently, we can safely allow "unknown" sized arrays as
well.
This is probably the best we can do, when we have even more difficult
cases than this, we throw a more sensible error message.
This is a large refactor which splits out the SPIR-V parser from
Compiler and moves it into its more appropriately named Parser module.
The Parser is responsible for building a ParsedIR structure which is
then consumed by one or more compilers.
Compiler can take a ParsedIR by value or move reference. This should
allow for optimal case for both multiple compilations and single
compilation scenarios.
Even as of Metal 2.1, MSL still doesn't support arrays of buffers
directly. Therefore, we must manually expand them. In the prologue, we
define arrays holding the argument pointers; these arrays are what the
transpiled code ends up referencing. We might be able to do similar
things for textures and samplers prior to MSL 2.0.
Speaking of which, also enable texture arrays on iOS MSL 1.2.
It'll be useful to have an "auxiliary buffer" for other builtins--e.g.
`DrawIndex` (which should be easier to implement now), or `ViewIndex`
when someone gets around to implementing multiview.
Pass this buffer to leaf functions as well.
Test that we handle this for integer textures as well.
It's intended to be used with MoltenVK to support arbitrary
`VkComponentMapping` settings. The idea is that MoltenVK will pass a
buffer (which it set to some buffer index that isn't being used)
containing packed versions of the `VkComponentMapping` struct, one for
each sampled image.
Yes, this is horribly ugly. It is unfortunately necessary. Much of the
ugliness is to support swizzling gather operations, where we need to
alter the component that the gather operates on--something complicated
by the `gather()` method requiring the passed-in component to be a
constant expression. It doesn't even support swizzling gathers on depth
textures, though I could add that if it turns out we need it.
This is somewhat tricky, because in MSL this value is obtained through a
function, `get_sample_position()`. Since the call expression is an
rvalue, it can't be passed by reference, so functions get a copy
instead.
This was the last piece preventing us from turning on sample-rate
shading support in MoltenVK.
