Commit Graph

61 Commits

Author SHA1 Message Date
Hans-Kristian Arntzen
185551bfaf HLSL: Do not emit globallycoherent for SRV ByteAddressBuffer. 2020-03-05 10:37:36 +01:00
Hans-Kristian Arntzen
e81c1b1d98 HLSL: Declare undef variables as static.
Undef variables would somehow become cbuffer variables without any
warning ...
2020-02-08 13:39:50 +01:00
Dan Sinclair
d409210ee5 Move all .invalid shaders into no-opt folders. 2019-11-05 13:19:19 -05:00
Dan Sinclair
e5af41255c Only run spirv-opt if the spirv is valid.
This CL updates the test runner to only run spirv-opt if the generated
SPIR-V is valid. If validation is skipped it's possible to hit aborts
and other memory errors in the optimizer as it assumes the SPIR-V is
valid.
2019-11-05 11:00:49 -05:00
Chip Davis
2eff420d9a Support the SPV_EXT_fragment_shader_interlock extension.
This was straightforward to implement in GLSL. The
`ShadingRateInterlockOrderedEXT` and `ShadingRateInterlockUnorderedEXT`
modes aren't implemented yet, because we don't support
`SPV_NV_shading_rate` or `SPV_EXT_fragment_invocation_density` yet.

HLSL and MSL were more interesting. They don't support this directly,
but they do support marking resources as "rasterizer ordered," which
does roughly the same thing. So this implementation scans all accesses
inside the critical section and marks all storage resources found
therein as rasterizer ordered. They also don't support the fine-grained
controls on pixel- vs. sample-level interlock and disabling ordering
guarantees that GLSL and SPIR-V do, but that's OK. "Unordered" here
merely means the order is undefined; that it just so happens to be the
same as rasterizer order is immaterial. As for pixel- vs. sample-level
interlock, Vulkan explicitly states:

> With sample shading enabled, [the `PixelInterlockOrderedEXT` and
> `PixelInterlockUnorderedEXT`] execution modes are treated like
> `SampleInterlockOrderedEXT` or `SampleInterlockUnorderedEXT`
> respectively.

and:

> If [the `SampleInterlockOrderedEXT` or `SampleInterlockUnorderedEXT`]
> execution modes are used in single-sample mode they are treated like
> `PixelInterlockOrderedEXT` or `PixelInterlockUnorderedEXT`
> respectively.

So this will DTRT for MoltenVK and gfx-rs, at least.

MSL additionally supports multiple raster order groups; resources that
are not accessed together can be placed in different ROGs to allow them
to be synchronized separately. A more sophisticated analysis might be
able to place resources optimally, but that's outside the scope of this
change. For now, we assign all resources to group 0, which should do for
our purposes.

`glslang` doesn't support the `RasterizerOrdered` UAVs this
implementation produces for HLSL, so the test case needs `fxc.exe`.

It also insists on GLSL 4.50 for `GL_ARB_fragment_shader_interlock`,
even though the spec says it needs either 4.20 or
`GL_ARB_shader_image_load_store`; and it doesn't support the
`GL_NV_fragment_shader_interlock` extension at all. So I haven't been
able to test those code paths.

Fixes #1002.
2019-09-02 12:31:10 -05:00
Hans-Kristian Arntzen
4bc8729c0e HLSL query lod cleanups. 2019-07-24 11:34:28 +02:00
Hans-Kristian Arntzen
18bcc9b790 Do not disable temporary forwarding when we suppress usage tracking.
This subtle bug removed any expression validation for trivially swizzled
variables. Make usage suppression a more explicit concept rather than
just hacking off forwarded_temporaries.

There is some fallout here with loop generation since our expression
invalidation is currently a bit too naive to handle loops properly.
The forwarding bug masked this problem until now.

If part of the loop condition is also used in the body, we end up
reading an invalid expression, which in turn forces a temporary to be
generated in the condition block, not good. We'll need to be smarter
here ...
2019-07-23 19:18:44 +02:00
Chip Davis
50dce10c5d Support the SPV_EXT_demote_to_helper_invocation extension.
This extension provides a new operation which causes a fragment to be
discarded without terminating the fragment shader invocation. The
invocation for the discarded fragment becomes a helper invocation, so
that derivatives will remain defined. The old `HelperInvocation` builtin
becomes undefined when this occurs, so a second new instruction queries
the current helper invocation status.

This is only fully supported for GLSL. HLSL doesn't support the
`IsHelperInvocation` operation and MSL doesn't support the
`DemoteToHelperInvocation` op.

Fixes #1052.
2019-07-17 09:12:22 -05:00
Chip Davis
343c6f4ff4 Update external repos.
Fix fallout from changes.

There's a bug in glslang that prevents `float16_t`, `[u]int16_t`, and
`[u]int8_t` constants from adding the corresponding SPIR-V capabilities.
SPIRV-Tools, meanwhile, tightened validation so that these constants are
only valid if the corresponding `Float16`, `Int16`, and `Int8` caps are
on. This affects the `16bit-constants.frag` test for GLSL and MSL.
2019-07-13 16:50:21 -05:00
Hans-Kristian Arntzen
50342966c0 Fall back to complex loop if non-trivial continue block is found.
There is a case where we can deduce a for/while loop, but the continue
block is actually very painful to deal with, so handle that case as
well. Removes an exceptional case.
2019-07-08 11:54:29 +02:00
Hans-Kristian Arntzen
4056d0b74e Don't use scalar dot(). 2019-07-03 14:32:06 +02:00
Hans-Kristian Arntzen
041f103d44 MSL/HLSL: Support scalar reflect and refract. 2019-07-03 12:31:52 +02:00
Hans-Kristian Arntzen
647ddaee42 HLSL/MSL: Deal correctly with nonuniformEXT qualifier.
MSL does not seem to have a qualifier for this, but HLSL SM 5.1 does.
glslangValidator for HLSL does not support this, so skip any validation,
but it passes in FXC.
2019-05-13 14:58:27 +02:00
Hans-Kristian Arntzen
4e7777c443 Update to latest glslang/SPIRV-Tools.
Fix various bugs along the way.
2019-01-30 13:41:57 +01:00
Hans-Kristian Arntzen
18a4accd2f HLSL/MSL: Fix texture projection with Dref.
We need to divide the Dref by q.
2019-01-28 10:25:13 +01:00
Hans-Kristian Arntzen
4394249b86
Merge pull request #815 from KhronosGroup/fix-811
HLSL: Support dual-source blending.
2019-01-11 12:52:26 +01:00
Hans-Kristian Arntzen
a365ff17bd HLSL: Support dual-source blending. 2019-01-11 10:03:45 +01:00
Hans-Kristian Arntzen
d92de00cc1 Rewrite how IDs are iterated over.
This is a fairly fundamental change on how IDs are handled.
It serves many purposes:

- Improve performance. We only need to iterate over IDs which are
  relevant at any one time.
- Makes sure we iterate through IDs in SPIR-V module declaration order
  rather than ID space. IDs don't have to be monotonically increasing,
  which was an assumption SPIRV-Cross used to have. It has apparently
  never been a problem until now.
- Support LUTs of structs. We do this by interleaving declaration of
  constants and struct types in SPIR-V module order.

To support this, the ParsedIR interface needed to change slightly.
Before setting any ID with variant_set<T> we let ParsedIR know
that an ID with a specific type has been added. The surface for change
should be minimal.

ParsedIR will maintain a per-type list of IDs which the cross-compiler
will need to consider for later.

Instead of looping over ir.ids[] (which can be extremely large), we loop
over types now, using:

ir.for_each_typed_id<SPIRVariable>([&](uint32_t id, SPIRVariable &var) {
	handle_variable(var);
});

Now we make sure that we're never looking at irrelevant types.
2019-01-10 12:52:56 +01:00
Hans-Kristian Arntzen
acae607703 Register implied expression reads in OpLoad/OpAccessChain.
This is required to avoid relying on complex sub-expression elimination
in compilers, and generates cleaner code.

The problem case is if a complex expression is used in an access chain,
like:

Composite comp = buffer[texture(...)];
vec4 a = comp.a + comp.b + comp.c;

Before, we did not have common subexpression tracking for
OpLoad/OpAccessChain, so we easily ended up with code like:

vec4 a = buffer[texture(...)].a + buffer[texture(...)].b + buffer[texture(...)].c;

A good compiler will optimize this, but we should not rely on it, and
forcing texture(...) to a temporary also looks better.

The solution is to add a vector "implied_expression_reads", which works
similarly to expression_dependencies. We also need an extra mechanism in
to_expression which lets us skip expression read checking and do it
later. E.g. for expr -> access chain -> load, we should only trigger
a read of expr when using the loaded expression.
2019-01-04 14:56:12 +01:00
Hans-Kristian Arntzen
04f410d35c Fix unsigned switch case selectors. 2018-11-26 10:36:50 +01:00
Hans-Kristian Arntzen
4e5c8d7199 Deal with depth_greater/depth_less qualifiers.
Adds support on HLSL SM 5.0, and fixes bug on GLSL.
Makes sure early fragment tests is tested on MSL as well.
2018-11-12 10:35:36 +01:00
Hans-Kristian Arntzen
b778e16e48 HLSL: Complete support for combined image samplers in legacy. 2018-11-12 09:59:39 +01:00
Hans-Kristian Arntzen
62db535b3f Update tests. 2018-11-01 11:23:48 +01:00
Hans-Kristian Arntzen
6157bf3cae Add Windows support in Travis CI.
- Add new Windows support
- Use CMake/CTest instead of Make + shell scripts
- Use --parallel in CTest
- Fix CTest on Windows
- Cleanups in test_shaders.py
- Force specific commit for SPIRV-Headers
- Fix Inf/NaN odd-ball case by moving to ASM
2018-10-27 00:22:30 +02:00
Hans-Kristian Arntzen
226d837d7e HLSL: Use same logic as GLSL for picking cbuffer block name.
HLSL just picked the variable name which did not work as expected for
some users. Use the same logic as GLSL and set up declared_block_names,
so the actual name can be queried later.
2018-10-22 09:50:04 +02:00
Hans-Kristian Arntzen
af75ef005f Update glslang and SPIRV-Tools.
A lot of changes in spirv-opt output.
Some new invalid SPIR-V was found but most of them were not significant
for SPIRV-Cross, so just marked them as invalid.
2018-09-27 11:10:22 +02:00
Hans-Kristian Arntzen
4d478316e5 Add missing reference files. 2018-09-12 09:45:08 +02:00
Hans-Kristian Arntzen
eee290a029 MSL: Fix support for texelFetchOffset.
Just apply the offset directly, MSL has no immediate offset parameter.
2018-08-07 15:28:04 +02:00
Hans-Kristian Arntzen
5582523d9a Add some tests for LUT promotion.
Also, update other tests.
2018-07-05 14:14:18 +02:00
Hans-Kristian Arntzen
d29f48ef06 Deduce constant LUTs from read-write variables. 2018-07-05 13:25:57 +02:00
Hans-Kristian Arntzen
ffa9133d77 Support ternary expressions in OpSpecConstantOp. 2018-06-25 09:49:13 +02:00
Hans-Kristian Arntzen
f1e8555801 Emit matrix layouts in structs directly.
Unlike GLSL, child structs do not inherit matrix layouts.
2018-06-05 09:42:07 +02:00
Hans-Kristian Arntzen
d93807a625 Deal with OpImageFetch without explicit LOD. 2018-04-30 10:54:44 +02:00
Hans-Kristian Arntzen
e8ca39b7b5 Add test for sampler image arrays. 2018-04-04 09:41:20 +02:00
Hans-Kristian Arntzen
e7bf8d2f48 Refactor out noopt shaders to their own folders.
Makes maintenance easier with less clutter.
2018-03-13 10:39:49 +01:00
Hans-Kristian Arntzen
938c7debed Handle control-dependent temporaries.
Derivatives, subgroup and implicit-lod instructions all need to happen
in the block they were created.
2018-03-12 17:34:54 +01:00
Hans-Kristian Arntzen
9fbd8b789e Update tests for latest SPIRV-Tools and glslang. 2018-03-12 15:11:55 +01:00
Hans-Kristian Arntzen
922420e346 Disallow arrays and structs from becoming loop variables.
Fixes awkward code-gen issue.
2018-03-07 14:54:11 +01:00
Hans-Kristian Arntzen
723bec5d33 frexp/ldexp fails in debug builds, workaround temporarily. 2018-03-07 11:20:53 +01:00
Hans-Kristian Arntzen
47d94ff8d9 Add FP16 to HLSL.
Cannot be used in buffer types, similar to mediump in GLSL.
half is useless, because it's 32-bit in FXC.
2018-03-07 10:21:25 +01:00
Hans-Kristian Arntzen
f6d08e6113 Add workaround for PointCoord builtin on HLSL. 2018-02-23 15:58:35 +01:00
Hans-Kristian Arntzen
dd603eab58 Support spec constant array size in blocks.
Won't really be correct if the spec constant is changed outside
SPIRV-Cross, but nothing we can do about that, really.
2018-02-23 15:11:45 +01:00
Hans-Kristian Arntzen
047ad7df0f Support special float constants (NaN/Inf). 2018-02-23 13:06:20 +01:00
Hans-Kristian Arntzen
0673f27b7c Fix incorrect loop range. 2018-02-22 17:00:41 +01:00
Hans-Kristian Arntzen
114c2c5e37 Add clip/cull-distance support to HLSL. 2018-02-22 16:40:04 +01:00
Hans-Kristian Arntzen
843e34b604 Add IsFrontFace support to HLSL. 2018-02-15 12:42:56 +01:00
Hans-Kristian Arntzen
18a594a76b Implement subpass input support in HLSL. 2018-02-10 10:54:42 +01:00
Hans-Kristian Arntzen
5d9df6a31c Do not declare constant composites inline in HLSL.
Move arrays and structs out to their own global static constants.

Also, replace illegal names in HLSL as well.
2018-02-02 10:12:26 +01:00
Hans-Kristian Arntzen
988f00fe3c Fix OpImage on OpSampledImages in HLSL. 2018-02-01 09:22:16 +01:00
Hans-Kristian Arntzen
23f0abf112 Update tests for struct flattening. 2018-01-09 10:40:34 +01:00