This patch adds initial support for loop unrolling in the form of a
series of utility classes which perform the unrolling. The pass can
be run with the command spirv-opt --loop-unroll. This will unroll
loops within the module which have the unroll hint set. The unroller
imposes a number of requirements on the loops it can unroll. These are
documented in the comments for the LoopUtils::CanPerformUnroll method in
loop_utils.h. Some of the restrictions will be lifted in future patches.
Implementation of the simplification pass.
- Create pass that calls the instruction folder on each instruction and
propagate instructions that fold to a copy. This will do copy
propagation as well.
- Did not use the propagator engine because I want to modify the instruction
as we go along.
- Change folding to not allocate new instructions, but make changes in
place. This change had a big impact on compile time.
- Add simplification pass to the legalization passes in place of
insert-extract elimination.
- Added test cases for new folding rules.
- Added tests for the simplification pass
- Added a method to the CFG to apply a function to the basic blocks in
reverse post order.
Contributes to #1164.
Creates a pass that will remove instructions that are invalid for the
current shader stage. For the instruction to be considered for replacement
1) The opcode must be valid for a shader modules.
2) The opcode must be invalid for the current shader stage.
3) All entry points to the module must be for the same shader stage.
4) The function containing the instruction must be reachable from an entry point.
Fixes#1247.
* Handles simple cases only
* Identifies phis in blocks with two predecessors and attempts to
convert the phi to an select
* does not perform code motion currently so the converted values must
dominate the join point (e.g. can't be defined in the branches)
* limited for now to two predecessors, but can be extended to handle
more cases
* Adding if conversion to -O and -Os
We have come across a driver bug where and OpUnreachable inside a loop
is causing the shader to go into an infinite loop. This commit will try
to avoid this bug by turning OpUnreachable instructions that are
contained in a loop into branches to the loop merge block.
This is not added to "-O" and "-Os" because it should only be used if
the driver being targeted has this problem.
Fixes#1209.
In HLSL structured buffer legalization, pointer to pointer types
are emitted to indicate a structured buffer variable should be
treated as an alias of some other variable. We need an option to
relax the check of pointer types in logical addressing mode to
catch other validation errors.
Turn `Linker::Link()` into free functions
As very little information was kept in the Linker class, we can get rid
of the whole class and have the `Link()` as free functions instead; the
environment target as well as the consumer are passed along through an
`spv_context` object.
The resulting linked_binary is passed as a pointer rather than a
reference to follow the Google C++ Style guidelines.
Addresses remaining comments from
https://github.com/KhronosGroup/SPIRV-Tools/pull/693 about the SPIR-V
linker.
Fix variable naming in the linker
Some of the variables were using mixed case, which did not follow the
Google C++ Style guidelines.
Linker: Use EXPECT_EQ when possible and update some test
* Replace occurrences of ASSERT_EQ by EXPECT_EQ when possible;
* Reformulated some of the error messages;
* Added the symbol name in the error message when there is a type or
decoration mismatch between the imported and exported declarations.
Opt: List all duplicates removed by RemoveDuplicatePass in the header
Opt: Make the const version of GetLabelInst() return a pointer
For consistency with the non-const version, as well as other similar
functions.
Opt: Rename function_end to EndInst()
As pointed out by dneto0 the previous name was quite confusing and could
be mistaken with a function returning an end iterator.
Also change the return type of the const version to a pointer rather
than a reference, for consistency.
Opt: Add performance comment to RemoveDuplicateTypes and decorations
This comment was requested during the review of
https://github.com/KhronosGroup/SPIRV-Tools/pull/693.
Opt: Add comments and fix variable naming in RemoveDuplicatePass
* Add missing comments to private functions;
* Rename variables that were using mixed case;
* Add TODO for moving AreTypesEqual out.
Linker: Remove commented out code and add TODOs
Linker: Merged together strings that were too much splitted
Implement a C++ RAII wrapper around spv_context
Adds optimizer API to write disassembly to a given output stream
before each pass, and after the last pass.
Adds spirv-opt --print-all option to write disassembly to stderr
before each pass, and after the last pass.
This implements the conditional constant propagation pass proposed in
Constant propagation with conditional branches,
Wegman and Zadeck, ACM TOPLAS 13(2):181-210.
The main logic resides in CCPPass::VisitInstruction. Instruction that
may produce a constant value are evaluated with the constant folder. If
they produce a new constant, the instruction is considered interesting.
Otherwise, it's considered varying (for unfoldable instructions) or
just not interesting (when not enough operands have a constant value).
The other main piece of logic is in CCPPass::VisitBranch. This
evaluates the selector of the branch. When it's found to be a known
value, it computes the destination basic block and sets it. This tells
the propagator which branches to follow.
The patch required extensions to the constant manager as well. Instead
of hashing the Constant pointers, this patch changes the constant pool
to hash the contents of the Constant. This allows the lookups to be
done using the actual values of the Constant, preventing duplicate
definitions.
* changed the way duplicate types are removed to stop copying
instructions
* Reworked RemoveDuplicatesPass::AreTypesSame to use type manager and
type equality
* Reworked TypeManager memory management to store a pool of unique
pointers of types
* removed unique pointers from id map
* fixed instances where free'd memory could be accessed
Changes the set of optimizations done for legalization. While doing
this, I added documentation to explain why we want each optimization.
A new option "--legalize-hlsl" is added so the legalization passes can
be easily run from the command line.
The legalize option implies skip-validation.
When a private variable is used in a single function, it can be
converted to a function scope variable in that function. This adds a
pass that does that. The pass can be enabled using the option
`--private-to-local`.
This transformation allows other transformations to act on these
variables.
Also moved `FindPointerToType` from the inline class to the type manager.
Adds a scalar replacement pass. The pass considers all function scope
variables of composite type. If there are accesses to individual
elements (and it is legal) the pass replaces the variable with a
variable for each composite element and updates all the uses.
Added the pass to -O
Added NumUses and NumUsers to DefUseManager
Added some helper methods for the inst to block mapping in context
Added some helper methods for specific constant types
No longer generate duplicate pointer types.
* Now searches for an existing pointer of the appropriate type instead
of failing validation
* Fixed spec constant extracts
* Addressed changes for review
* Changed RunSinglePassAndMatch to be able to run validation
* current users do not enable it
Added handling of acceptable decorations.
* Decorations are also transfered where appropriate
Refactored extension checking into FeatureManager
* Context now owns a feature manager
* consciously NOT an analysis
* added some test
* fixed some minor issues related to decorates
* added some decorate related tests for scalar replacement
The option --skip-validation is added. When used it will skip the
validation step.
Also rearranged the help text to fix two options that are out of order.
Adds a pass that looks for redundant instruction in a function, and
removes them. The algorithm is a hash table based value numbering
algorithm that traverses the dominator tree.
This pass removes completely redundant instructions, not partially
redundant ones.
Creates a pass that removes redundant instructions within the same basic
block. This will be implemented using a hash based value numbering
algorithm.
Added a number of functions that check for the Vulkan descriptor types.
These are used to determine if we are variables are read-only or not.
Implemented a function to check if loads and variables are read-only.
Implemented kernel specific and shader specific versions.
A big change is that the Combinator analysis in ADCE is factored out
into the IRContext as an analysis. This was done because it is being
reused in the value number table.
Add new "short descriptor" algorithm to MARK-V codec.
Add three shader compression models:
lite - fast, poor compression
mid - balanced
max - best compression
Works with current DefUseManager infrastructure.
Added merge return to the standard opts.
Added validation to passes.
Disabled pass for shader capabilty.
NFC. This just makes sure every file is formatted following the
formatting definition in .clang-format.
Re-formatted with:
$ clang-format -i $(find source tools include -name '*.cpp')
$ clang-format -i $(find source tools include -name '*.h')
There are a number of users of spriv-opt that are hitting errors
because of stores with different types. In general, this is wrong, but,
in these cases, the types are the exact same except for decorations.
The options is "--relax-store-struct", and it can be used with the
validator or the optimizer.
We assume that if layout information is missing it is consistent. For
example if one struct has a offset of one of its members, and the other
one does not, we will still consider them as being layout compatible.
The problem will be if both struct has and offset decoration for
corresponding members, and the offset are different.
Markv codec now receives two optional callbacks:
LogConsumer for internal codec logging
DebugConsumer for testing if encoding->decoding produces the original
results.
There does not seem to be any pass that remove global variables. I
think we could use one. This pass will look specifically for global
variables that are not referenced and are not exported. Any decoration
associated with the variable will also be removed. However, this could
cause types or constants to become unreferenced. They will not be
removed. Another pass will have to be called to remove those.
- Adds a new pass CFGCleanupPass. This serves as an umbrella pass to
remove unnecessary cruft from a CFG.
- Currently, the only cleanup operation done is the removal of
unreachable basic blocks.
- Adds unit tests.
- Adds a flag to spirvopt to execute the pass (--cfg-cleanup).
- switched from C to C++
- moved MARK-V model creation from backend to frontend
- The same MARK-V model object can be used to encode/decode multiple
files
- Added MARK-V model factory (currently only one option)
- Added --validate option to spirv-markv (run validation while
encoding/decoding)
These flags are expanded to a series of spirv-opt flags with the
following semantics:
-O: expands to passes that attempt to improve the performance of the
generated code.
-Os: expands to passes that attempt to reduce the size of the generated
code.
-Oconfig=<file> expands to the sequence of passes determined by the
flags specified in the user-provided file.
Add extra iterators for ir::Module's sections
Add extra getters to ir::Function
Add a const version of BasicBlock::GetLabelInst()
Use the max of all inputs' version as version
Split debug in debug1 and debug2
- Debug1 instructions have to be placed before debug2 instructions.
Error out if different addressing or memory models are found
Exit early if no binaries were given
Error out if entry points are redeclared
Implement copy ctors for Function and BasicBlock
- Visual Studio ends up generating copy constructors that call deleted
functions while compiling the linker code, while GCC and clang do not.
So explicitly write those functions to avoid Visual Studio messing up.
Move removing duplicate capabilities to its own pass
Add functions running on all IDs present in an instruction
Remove duplicate SpvOpExtInstImport
Give default options value for link functions
Remove linkage capability if not making a library
Check types before allowing to link
Detect if two types/variables/functions have different decorations
Remove decorations of imported variables/functions and their types
Add a DecorationManager
Add a method for removing all decorations of id
Add methods for removing operands from instructions
Error out if one of the modules has a non-zero schema
Update README.md to talk about the linker
Do not freak out if an imported built-in variable has no export
Creates a pass called eliminate dead functions that looks for functions
that could never be called, and deletes them from the module.
To support this change a new function was added to the Pass class to
traverse the call trees from diffent starting points.
Includes a test to ensure that annotations are removed when deleting a
dead function. They were not, so fixed that up as well.
Did some cleanup of the assembly for the test in pass_test.cpp. Trying
to make them smaller and easier to read.
- now includes a table of all descriptors with coding scheme
(improves performance by 5% by allowing to avoid creation of
move-to-front sequences which will never be used)
- increased the size of markv_autogen.inc, clang doesn't seem
to have the long compilation time problem now
(probably was inadvertently fixed by using Huffman codec
serialization)
Create a new optimization pass, strength reduction, which will replace
integer multiplication by a constant power of 2 with an equivalent bit
shift. More changes could be added later.
- Does not duplicate constants
- Adds vector |Concat| utility function to a common test header.
Includes:
- Multi-sequence move-to-front
- Coding by id descriptor
- Statistical coding of non-id words
- Joint coding of opcode and num_operands
Removed explicit form Huffman codec constructor
- The standard use case for it is to be constructed from initializer list.
Using serialization for Huffman codecs
Only inline calls to functions with opaque params or return
TODO: Handle parameter type or return type where the opqaue
type is buried within an array.
Id descriptors are computed as a recursive hash of all instructions used
to define an id. Descriptors are invarint of actual id values and
the similar code in different files would produce the same descriptors.
Multiple ids can have the same descriptor. For example
%1 = OpConstant %u32 1
%2 = OpConstant %u32 1
would produce two ids with the same descriptor. But
%3 = OpConstant %s32 1
%4 = OpConstant %u32 2
would have descriptors different from %1 and %2.
Descriptors will be used as handles of move-to-front sequences in SPIR-V
compression.
- UniformElim: Only process reachable blocks
- UniformElim: Don't reuse loads of samplers and images across blocks.
Added a second phase which only reuses loads within a block for samplers
and images.
- UniformElim: Upgrade CopyObject skipping in GetPtr
- UniformElim: Add extensions whitelist
Currently disallowing SPV_KHR_variable_pointers because it doesn't
handle extended pointer forms.
- UniformElim: Do not process shaders with GroupDecorate
- UniformElim: Bail on shaders with non-32-bit ints.
- UniformElim: Document support for only single index and add TODO.
Create aggressive dead code elimination pass
This pass eliminates unused code from functions. In addition,
it detects and eliminates code which may have spurious uses but which do
not contribute to the output of the function. The most common cause of
such code sequences is summations in loops whose result is no longer used
due to dead code elimination. This optimization has additional compile
time cost over standard dead code elimination.
This pass only processes entry point functions. It also only processes
shaders with logical addressing. It currently will not process functions
with function calls. It currently only supports the GLSL.std.450 extended
instruction set. It currently does not support any extensions.
This pass will be made more effective by first running passes that remove
dead control flow and inlines function calls.
This pass can be especially useful after running Local Access Chain
Conversion, which tends to cause cycles of dead code to be left after
Store/Load elimination passes are completed. These cycles cannot be
eliminated with standard dead code elimination.
Additionally: This transform uses a whitelist of instructions that it
knows do have side effects, (a.k.a. combinators). It assumes other
instructions have side effects: it will not remove them, and assumes
they have side effects via their ID operands.
A SSA local variable load/store elimination pass.
For every entry point function, eliminate all loads and stores of function
scope variables only referenced with non-access-chain loads and stores.
Eliminate the variables as well.
The presence of access chain references and function calls can inhibit
the above optimization.
Only shader modules with logical addressing are currently processed.
Currently modules with any extensions enabled are not processed. This
is left for future work.
This pass is most effective if preceeded by Inlining and
LocalAccessChainConvert. LocalSingleStoreElim and LocalSingleBlockElim
will reduce the work that this pass has to do.
If this is used as a static library in another project, this does not
need to be installed, and otherwise will just clutter the application's install.
To use, define SKIP_SPIRV_TOOLS_INSTALL which internally defines
ENABLE_SPIRV_TOOLS_INSTALL to control installation.
Also include GNUInstallDirs to get standard output 'lib' directory which is sometimes 'lib64' and not 'lib'
Command line application is located at tools/spirv-markv
API at include/spirv-tools/markv.h
At the moment only very basic compression is implemented, mostly varint.
Scope of supported SPIR-V opcodes is also limited.
Using a simple move-to-front implementation instead of encoding mapped
ids.
Work in progress:
- Does not cover all of SPIR-V
- Does not promise compatibility of compression/decompression across
different versions of the code.
Added data structure to SpirvStats which is used to collect statistics
on opcodes following other opcodes.
Added a simple analysis print-out to spirv-stats.
Add --flatten-decorations to spirv-opt
Flattens decoration groups. That is, replace OpDecorationGroup
and its uses in OpGroupDecorate and OpGroupMemberDecorate with
ordinary OpDecorate and OpMemberDecorate instructions.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/602
Exercises our public APIs more, and avoid including most
internal headers. It also shortens the processing part
of the code, but does make adding passes look more complex.
Doing this exposed issue 611, a bug in spvtools::Optimizer.
Autogenerating the following code:
- extension enum
- extension-to-string
- string-to-extension
- capability-to-string
Capability mapping table will not compile if incomplete.
TODO: Use "spirv-latest-version.h" instead of 1.1.
Added function to generate capability tables for tests.
The limit for the number of struct members is parameterized using
command line options.
Add --max-struct-depth command line option.
Add --max-switch-branches command line option.
Add --max-function-args command line option.
Add --max-control-flow-nesting-depth option.
Add --max-access-chain-indexes option.
Default-constructed Pass/PassManager will have a MessageConsumer
which ignores all messages. SetMessageConsumer() should be called
to supply a meaningful MessageConsumer.
De-duplicate constants and unifies the uses of constants for a SPIR-V
module. If two constants are defined exactly the same, only one of them
will be kept and all the uses of the removed constant will be redirected
to the kept one.
This pass handles normal constants (defined with
OpConstant{|True|False|Composite}), some spec constants (those defined
with OpSpecConstant{Op|Composite}) and null constants (defined with
OpConstantNull).
There are several cases not handled by this pass:
1) If there are decorations for the result id of a constant defining
instruction, that instruction will not be processed. This means the
instruction won't be used to replace other instructions and other
instructions won't be used to replace it either.
2) This pass does not unify null constants (defined with
OpConstantNull instruction) with their equivalent zero-valued normal
constants (defined with OpConstant{|False|Composite} with zero as the
operand values or component values).
For the spec constants defined by OpSpecConstantOp and
OpSpecContantComposite, if all of their operands are constants with
determined values (normal constants whose values are fixed), calculate
the correct values of the spec constants and re-define them as normal
constants.
In short, this pass replaces all the spec constants defined by
OpSpecContantOp and OpSpecConstantComposite with normal constants when
possible. So far not all valid operations of OpSpecConstantOp are
supported, we have several constriction here:
1) Only 32-bit integer and boolean (both scalar and vector) are
supported for any arithmetic operations. Integers in other width (like
64-bit) are not supported.
2) OpSConvert, OpFConvert, OpQuantizeToF16, and all the
operations under Kernel capability, are not supported.
3) OpCompositeInsert is not supported.
Note that this pass does not unify normal constants. This means it is
possible to have new generatd constants defining the same values.
This is experimental, and has not tests.
It's been used to debug validation of structured control flow.
- Has a legend describing special arcs to merge blocks and continue
targets.
- Labels the function entry block, with the Id of the function.
Add a pass to freeze spec constants to their default values. This pass does
not fold the frozen spec constants and does not handle SpecConstantOp
instructions and SpecConstantComposite instructions.
Add a high level version number for SPIRV-Tools, beginning
with v2016.0-dev. The README describes the format of the
version number.
The high level version number is extracted from the CHANGES
file. That works around:
- stale-bait for when we don't add tags to the repository
- our inability to add tags to the repository
Option --version causes spirv-as, spirv-dis, and spirv-val to
show the high level version number.
Add spvSoftwareVersionString to return the C-string for
the high level version number.
Add spvSoftwareVersionDetailsString() so that clients can get
more information if they want to.
Also allows us to clean up the uses in the tool executables files,
so now only one file includes build-version.inc.
Move the update-build-version logic to the only
CMakeLists file that needs it.
The update build version script takes a new argument
to name the output file.
Add test for named-barrier instructions and capability.
Add spv_target_env as an optional argument to CompileSuccessfully() and
CompileFailure(). Currently defaults to UNIVERSAL_1_0, though that
could change in the future.
Make spv_context a local variable in test methods instead of a
TextToBinaryTestBase member. Introduce ScopedContext to make temp
contexts easier.
For fulfilling this purpose, the |opcode| field in the
|spv_parsed_instruction_t| struct is changed to of type uint16_t.
Also add functions to query the information of a given SPIR-V
target environment.
Users always want to run all the checks. The spv_validate_options_t
mechanism, which provides little benefits to users, complicates the
internal implementation and also makes the tests exercise different
paths as users do.
Right now the tests are more like integration tests instead of
unit tests, which should be our next refactoring aim.
Now we have public headers arranged as follows:
$SPIRV_TOOLS_ROOT/include/spirv-tools/libspirv.h
$SPIRV_TOOLS_ROOT/include/spirv/spirv.h
$SPIRV_TOOLS_ROOT/include/spirv/GLSL.std.450.h
$SPIRV_TOOLS_ROOT/include/spirv/OpenCL.std.h
A project should use -I$SPIRV_TOOLS_ROOT/include
and then #include "spirv-tools/libspirv.h"
The headers from the SPIR-V Registry can be accessed as "spirv/spirv."
for example.
The install target should also install the headers from the SPIR-V
Registry. The libspirv.h header is broken otherwise.
The SPIRV-Tools library depends on the headers from the SPIR-V Registry.
The util/bitutils.h and util/hex_float.h are pulled into the internal
source tree. Those are not part of the public API to SPIRV-Tools.
Reorganize the README, and update its contents to more accurately
reflect the public release.
Remove the incremental "Changes" section.
Rename readme.md to README.md
Rename license.txt to LICENSE
Update the assembler tool to support -h, and make its help look
more consistent with the disassembler.
Change the target and library name to SPIRV-Tools. To better
match the GitHub repo name. Also, it's not SHOUTING.
Read from stdin if:
- no input filename specified
- the input filename is "-"
Also, output goes to stdout if the output filename (argument to -o)
is "-".
Previously the opcode table is declared as an global array and we
have spvOpcodeTableInitialize() modifying it. That can result in
race condition. Now spvOpcodeTabelGet() copies the whole underlying
array.
Replaced uint64_t with size_t in the places that make sense and
added spv_const_binary{,_t} to allow the interface to accept non
modifiable spirv where appropriate.
Note that we are more strict than Google style for one aspect:
pointer/reference indicators are adjacent to their types, not
their variables.
find . -name "*.h" -exec clang-format -i {} \;
find . -name "*.cpp" -exec clang-format -i {} \;
Previous the api used spv_text_t and spv_binary_t for both input
and output, but depending on the usage, you either MUST
call spvBinaryDestroy or you MUST NOT call spvBinaryDestroy on the
pointer.
