This allows the GPU-AV layer to differentiate between errors with
uniform buffers versus storage buffers and map these to the relevant
VUIDs.
This is a resubmit of a previously reverted commit. The revert was
done as someone erroneously attempted to build the latest validation
layers with a TOT spirv-tools. The validation layers must be built with
their known-good glslang and its known-good spirv-tools and spirv-headers.
* Validate SPV_KHR_workgroup_memory_explicit_layout
* Check if SPIR-V is at least 1.4 to use the extension.
* Check if either only Workgroup Blocks or only Workgroup non-Blocks
are used.
* Check that if more than one Workgroup Block is used, variables are
decorated with Aliased.
* Check layout decorations for Workgroup Blocks.
* Implicitly use main capability if the ...8BitAccess or
...16BitAccess are used.
* Allow 8-bit and 16-bit types when ...8BitAccess and ...16BitAccess
are used respectively.
* Update SPIRV-Headers dependency
Bump it to include SPV_KHR_workgroup_memory_explicit_layout.
* Add option to validate Workgroup blocks with scalar layout
Validate the equivalent of scalarBlockLayout for Workgroup storage
class Block variables from SPV_KHR_workgroup_memory_explicit_layout.
Add option to the API and command line tool.
This patch supports new Intel extensions added via
https://github.com/KhronosGroup/SPIRV-Headers/pull/176
SPV_INTEL_fooat_controls2 requires extra support to add
two new operand types:
SPV_OPERAND_TYPE_FPDENORM_MODE
SPV_OPERAND_TYPE_FPOPERATION_MODE
This instruments ImageRead, ImageWrite and ImageFetch when applied to
texel buffers.
Also add new (but not yet generated) buffer OOB error codes differentiated
for VUID classification.
Removing PropagateLineInfoPass and RedundantLineInfoElimPass from
56d0f5035 makes unit tests of many open source projects fail.
It will happen before submitting this glslang PR
https://github.com/KhronosGroup/glslang/pull/2440. This commit will be
git-reverted after merging the glslang PR.
Based on the OpLine spec, an OpLine instruction must be applied to
the instructions physically following it up to the first occurrence
of the next end of block, the next OpLine instruction, or the next
OpNoLine instruction.
```
OpLine %file 0 0
OpNoLine
OpLine %file 1 1
OpStore %foo %int_1
%value = OpLoad %int %foo
OpLine %file 2 2
```
For the above code, the current spirv-opt keeps three line
instructions `OpLine %file 0 0`, `OpNoLine`, and `OpLine %file 1 1`
in `std::vector<Instruction> dbg_line_insts_` of Instruction class
for `OpStore %foo %int_1`. It does not put any line instruction to
`std::vector<Instruction> dbg_line_insts_` of
`%value = OpLoad %int %foo` even though `OpLine %file 1 1` must be
applied to `%value = OpLoad %int %foo` based on the spec.
This results in the missing line information for
`%value = OpLoad %int %foo` while each spirv-opt pass optimizes the
code. We have to put `OpLine %file 1 1` to
`std::vector<Instruction> dbg_line_insts_` of
both `%value = OpLoad %int %foo` and `OpStore %foo %int_1`.
This commit conducts the line instruction propagation and skips
emitting the eliminated line instructions at the end, which are the same
with PropagateLineInfoPass and RedundantLineInfoElimPass. This
commit removes PropagateLineInfoPass and RedundantLineInfoElimPass.
KhronosGroup/glslang#2440 is a related PR that stop using
PropagateLineInfoPass and RedundantLineInfoElimPass from glslang.
When the code in this PR applied, the glslang tests will pass.
This CL adds some extra new lines and context comments into the
spirv-dis output format. This CL adds:
- Blank line and '; Annotations' before decorations
- Blank line and '; Debug Information' before debug instructions
- Blank line and '; Types, variables and constants' before type section
- Blank line and '; Function <name>' before each function.
Issue #788
This change introduces various strategies for controlling the manner
in which fuzzer passes are applied repeatedly, including infrastructure
to allow fuzzer passes to be recommended based on which passes ran
previously.
Motivated by integrating spirv-reduce into spirv-fuzz, so that an
added function can be made smaller during shrinking, this adds support
in spirv-reduce for asking reduction to be restricted to the
instructions of a single specified function.
* Generate ext inst table for reflection
* Change build to use grammar files from SPIRV-Headers instead of
SPIRV-Tools
* Add enum for clspv reflection extended instruction set
* count it as non-semantic
* validate clspv reflection extended instruction set
* Remove local extended inst sets
* update headers deps
* Update nbuilds to use grammars from SPIRV-Headers instead of
local duplicates
* Avoid operand type range checks
Deprecates the SPV_OPERAND_TYPE_FIRST_* and SPV_OPERAND_TYPE_LAST_*
macros.
The "variable" and "optional" operand types are only for internal use.
Export spvOperandIsConcrete instead, as that should cover intended
external uses.
Test that each operand type is classified either as one of:
- a sentinel value
- a concrete operand type
- an optional operand type (which includes variable-expansion types)
Test that each concrete and optional non-variable operand type
has a name for use internally when generating messages.
Co-authored-by: Steven Perron <stevenperron@google.com>
Create a pass to instrument OpDebugPrintf instructions. This pass replaces all OpDebugPrintf instructions with instructions to write a record containing the string id and the all specified values into a special printf output buffer (if space allows). This pass is designed to support the printf validation in the Vulkan validation layers.
Fixes#3210
This new API lets clients request a minimal spv_target_env value
that supports a given Vulkan and SPIR-V version, by a generic
numbering scheme (as already defined by Vulkan and SPIR-V specs).
This breaks a formal source dependency from Glslang to SPIRV-Tools.
When a new API is rolled out, such as Vulkan 1.2, Glslang currently
needs to reference a specific SPIRV-Tools enum by name.
* Clone opencl.debuginfo.100 grammar from debuginfo grammar
Update version number to 200 revision 2
* Apply content from OpenCL.DebugInfo.100 extension text
* Rename grammar file
* Support OpenCL.DebugInfo.100 extended instructions
Add support for prefixing operand type names, to disambiguate
them between different instruction sets.
* Add tests for OpenCL.DebugInfo.100
* Support lookup of OpenCL.DebugInfo.100 extinst
* Add tests for enum values
* Recognize 2017-2019 as copyright date range
* Android.mk: support OpenCL.DebugInfo.100 extended instruction set
Also, stop generating core instruction tables for non-unified1 versions
of the grammar.
* Imported entity operand type is concrete
* Bazel: Suppoort OpenCL.DebugInfo.100
* BUILD.gn: Support OpenCL.DebugInfo.100
Add support for SPV_KHR_non_semantic_info
This entails a couple of changes:
- Allowing unknown OpExtInstImport that begin with the prefix `NonSemantic.`
- Allowing OpExtInst that reference any of those sets to contain unknown
ext inst instruction numbers, and assume the format is always a series of IDs
as guaranteed by the extension.
- Allowing those OpExtInst to appear in the types/variables/constants section.
- Not stripping OpString in the --strip-debug pass, since it may be referenced
by these non-semantic OpExtInsts.
- Stripping them instead in the --strip-reflect pass.
* Add adjacency validation of non-semantic OpExtInst
- We validate and test that OpExtInst cannot appear before or between
OpPhi instructions, or before/between OpFunctionParameter
instructions.
* Change non-semantic extinst type to single value
* Add helper function spvExtInstIsNonSemantic() which will check if the extinst
set is non-semantic or not, either the unknown generic value or any future
recognised non-semantic set.
* Add test of a complex non-semantic extinst
* Use DefUseManager in StripDebugInfoPass to strip some OpStrings
* Any OpString used by a non-semantic instruction cannot be stripped, all others
can so we search for uses to see if each string can be removed.
* We only do this if the non-semantic debug info extension is enabled, otherwise
all strings can be trivially removed.
* Silence -Winconsistent-missing-override in protobufs
* Make Instrumentation format version 2 the default (Step 1)
Add new interfaces without version number argument. Remove version 1
logic and tests. Version interfaces will be removed in step 2 after
layers have transitioned to new interface.
* Add error messages to InstrumentPass().
Access chain indices are always interpreted as signed integers.
So use signed clamp instead of unsigned clamp. We must also
clamp to the max signed int for the index type.
Fixes#3072
Adds an option to run the validator on the SPIR-V binary after each
fuzzer pass has been applied, to help identify when the fuzzer has
made the module invalid. Also adds a helper method to allow dumping
of the sequence of transformations that have been applied to a JSON
file.
To aid in debugging issues in spirv-fuzz, this change adds an option whereby the SPIR-V module is validated after each transformation is applied during replay. This can assist in finding a transformation that erroneously makes the module invalid, so that said transformation can be debugged.
* Ensure same enum values have consistent extension lists
* val: fix checking of capabilities
The operand for an OpCapability should only be
checked for the extension or core version.
The InstructionPass registers a capability, and all its implied
sub-capabilities before actually checking the operand to an
OpCapability.
* Add basic support for SPIR-V 1.5
- Adds SPV_ENV_UNIVERSAL_1_5
- Command line tools default to spv1.5 environment
- SPIR-V 1.5 incorporates several extensions. Now the disassembler
prefers outputing the non-EXT or non-KHR names. This requires
updates to many tests, to make strings match again.
- Command line tests: Expect SPIR-V 1.5 by default
* Test validation of SPIR-V 1.5 incorporated extensions
Starting with 1.5, incorporated features no longer require
the associated OpExtension instruction.
The first pass applies the RelaxedPrecision decoration to all executable
instructions with float32 based type results. The second pass converts
all executable instructions with RelaxedPrecision result to the equivalent
float16 type, inserting converts where necessary.
Add the first steps to removing the AMD extension VK_AMD_shader_ballot.
Splitting up to make the PRs smaller.
Adding utilities to add capabilities and change the version of the
module.
Replaces the instructions:
OpGroupIAddNonUniformAMD = 5000
OpGroupFAddNonUniformAMD = 5001
OpGroupFMinNonUniformAMD = 5002
OpGroupUMinNonUniformAMD = 5003
OpGroupSMinNonUniformAMD = 5004
OpGroupFMaxNonUniformAMD = 5005
OpGroupUMaxNonUniformAMD = 5006
OpGroupSMaxNonUniformAMD = 5007
and extentend instructions
WriteInvocationAMD = 3
MbcntAMD = 4
Part of #2814
We are no able to inline OpKill instructions into a continue construct.
See #2433. However, we have to be able to inline to correctly do
legalization. This commit creates a pass that will wrap OpKill
instructions into a function of its own. That way we are able to inline
the rest of the code.
The follow up to this will be to not inline any function that contains
an OpKill.
Fixes#2726
spirv-opt: Add --graphics-robust-access
Clamps access chain indices so they are always
in bounds.
Assumes:
- Logical addressing mode
- No runtime-array-descriptor-indexing
- No variable pointers
Adds stub code for clamping coordinate and samples
for OpImageTexelPointer.
Adds SinglePassRunAndFail optimizer test fixture.
Android.mk: add source/opt/graphics_robust_access_pass.cpp
Adds Constant::GetSignExtendedValue, Constant::GetZeroExtendedValue
Adds to spirv-fuzz the option to shrink a sequence of transformations
that lead to an interesting binary to be generated, to find a smaller
sub-sequence of transformations that still lead to an interesting (but
hopefully simpler) binary being generated. The notion of what counts
as "interesting" comes from a user-provided script, the
"interestingness function", similar to the way the spirv-reduce tool
works. The shrinking process will give up after a maximum number of
steps, which can be configured on the command line.
Tests for the combination of fuzzing and shrinking are included, using
a variety of interestingness functions.
New version has additional word in stage-specific section. Also
some changes in content for tesselation and compute shaders. Either
version can be invoked at pass creation. This is done to ease integration
and updating of validation layers. Version 1 is deprecated and eventually
will go away.
Also sneaking in fix to version 1 compute shaders.
Adds a library for spirv-fuzz, consisting of a Fuzzer class that will
transform a module with respect to (a) facts about the module provided
via a FactManager class, and (b) a source of random numbers and
parameters to control the transformation process provided via a
FuzzerContext class. Transformations will be applied via classes that
implement a FuzzerPass interface, and both facts and transformations
will be represented via protobuf messages. Currently there are no
concrete facts, transformations nor fuzzer passes; these will follow.
* Make pointers to logically matching types interchangeable with option.
DXC will be generating code where the function parameters will be a more
generic type that the actual parameter. They should be logically
matching and the decorations of the actual parameter must be a superset
of the decorations of the formal parameter.
We want to accept this code with an options so that spirv-opt can then
inline and fix the type mismatch. We will accept this under a new
options `--before-hlsl-legalization`.
The new option will also imply `relax-logical-pointer` so that HLSL
frontends will need to use just the one more generic option.
Moved the |LogicallyMatches| to the validation state to make it
available in more places. Also added a parameter to have it check the
decorations. I did not do a separate function for the decorations
because checking the decorations involves making sure the types
logically match anyway.
Fixes#2535
* SPIR-V 1.4 headers, add SPV_ENV_UNIVERSAL_1_4
* Support --target-env spv1.4 in help for command line tools
* Support asm/dis of UniformId decoration
* Validate UniformId decoration
* Fix version check on instructions and operands
Also register decorations used with OpDecorateId
* Extension lists can differ between enums that match
Example: SubgroupMaskEq vs SubgroupMaskEqKHR
* Validate scope value for Uniform decoration, for SPIR-V 1.4
* More unioning of exts
* Preserve grammar order within an enum value
* 1.4: Validate OpSelect over composites
* Tools default to 1.4
* Add asm/dis test for OpCopyLogical
* 1.4: asm/dis tests for PtrEqual, PtrNotEqual, PtrDiff
* Basic asm/Dis test for OpCopyMemory
* Test asm/dis OpCopyMemory with 2-memory access
Add asm/dis tests for OpCopyMemorySized
Requires grammar update to add second optional memory access operand
to OpCopyMemory and OpCopyMemorySized
* Validate one or two memory accesses on OpCopyMemory*
* Check av/vis on CopyMemory source and target memory access
This is a proposed rule. See
https://gitlab.khronos.org/spirv/SPIR-V/issues/413
* Validate operation for OpSpecConstantOp
* Validate NonWritable decoration
Also permit NonWritable on members of UBO and SSBO.
* SPIR-V 1.4: NonWrtiable can decorate Function and Private vars
* Update optimizer CLI tests for SPIR-V 1.4
* Testing tools: Give expected SPIR-V version in message
* SPIR-V 1.4 validation for entry point interfaces
* Allow only unique interfaces
* Allow all global variables
* Check that all statically used global variables are listed
* new tests
* Add validation fixture CompileFailure
* Add 1.4 validation for pointer comparisons
* New tests
* Validate with image operands SignExtend, ZeroExtend
Since we don't actually know the image texel format, we can't fully
validate. We need more context.
But we can make sure we allow the new image operands in known-good
cases.
* Validate OpCopyLogical
* Recursively checks subtypes
* new tests
* Add SPIR-V 1.4 tests for NoSignedWrap, NoUnsignedWrap
* Allow scalar conditions in 1.4 with OpSelect
* Allows scalar conditions with vector operands
* new tests
* Validate uniform id scope as an execution scope
* Validate the values of memory and execution scopes are valid scope
values
* new test
* Remove SPIR-V 1.4 Vulkan 1.0 environment
* SPIR-V 1.4 requires Vulkan 1.1
* FIX: include string for spvLog
* FIX: validate nonwritable
* FIX: test case suite for member decorate string
* FIX: test case for hlsl functionality1
* Validation test fixture: ease debugging
* Use binary version for SPIR-V 1.4 specific features
* Switch checks based on the SPIR-V version from the target environment
to instead use the version from the binary
* Moved header parsing into the ValidationState_t constructor (where
version based features are set)
* Added new versions of tests that assemble a 1.3 binary and validate a
1.4 environment
* Fix test for update to SPIR-V 1.4 headers
* Fix formatting
* Ext inst lookup: Add Vulkan 1.1 env with SPIR-V 1.4
* Update spirv-val help
* Operand version checks should use module version
Use the module version instead of the target environment version.
* Fix comment about two-access form of OpCopyMemory
WebGPU requires certain variables to be initialized, whereas there are
known issues with using initializers in Vulkan. This PR is the first
of three implementing a pass to decompose initialized variables into
a variable declaration followed by a store. This has been broken up
into multiple PRs, because there 3 distinct cases that need to be
handled, which require separate implementations.
This first PR implements the basic infrastructure that is needed, and
handling of Function storage class variables. Private and Output will
be handled in future PRs.
This is part of resolving #2388
In WebGPU, the component operand 0xFFFFFFFF is forbidden, but in
Vulkan it is used to indicate a value is undefined. When converting to
WebGPU, 0xFFFFFFFF needs to converted to a legal value, though the
specific one does not matter, since it was used to indicate an
undefined entry in the original code. Choosing to use 0, since the
operands are required to be on [0, N-1], so 0 is guaranteed to always
be valid.
Fixes#2349
Renames the existing flag '--webgpu-mode' to '--vulkan-to-webgpu' for
the Vulkan->WebGPU operation, and adds a new flag '--webgpu-to-vulkan'
for the WebGPU->Vulkan operation.
Currently '--webgpu-to-vulkan' doesn't have any passes associated with
it yet, but further patches will implement them.
Fixes#2495
This pass tries to fix validation error due to a mismatch of storage classes
in instructions. There is no guarantee that all such error will be fixed,
and it is possible that in fixing these errors, it could lead to other
errors.
Fixes#2430.
Fix#2475. Fix#2476.
* Improve reducer algorithm: shrink granularity, remove an early return, no lazy initialization, notify pass if binary is interesting, add comments.
* Add fail-on-validation-error option to fail a reduction if an invalid state is reached; useful for tests.
* Set fail-on-validation-error in tests.
* Improve some documentation comments.
* Add Reducer::AddDefaultReductionPasses so tests (and other library consumers) can add the default reduction passes.
* Add CLIMessageConsumer in test_reduce so we can see messages for tricky tests.
* Remove test RemoveUnreferencedInstructionReductionPassTest_ApplyReduction because it was indirectly testing the reduction algorithm, not the RemoveUnreferencedInstruction pass.
* Tweak tests where needed.
If SPV_EXT_descriptor_indexing is enabled, add check that for a
descriptor-based reference, the descriptor is initialized. Initialization
data is stored in the debug input buffer, added to the length information
already there. This feature must be seperately enabled on the pass
creation routine. NOTE: Currently just supports image references; buffer
references are still TODO.
Adds an optimization pass to remove usages of AtomicCounterMemory
bit. This bit is ignored in Vulkan environments and outright forbidden
in WebGPU ones.
Fixes#2242
Add a pass that looks for members of structs whose values do not affects
the output of the shader. Those members are then removed and just
treated like padding in the struct.
* Add SpirvTools::IsValid().
Add a method to determine if a SpirvTools object was successfully
constructed and can be used. It might not be depending on the parameter
to the constructor.
This is something a fuzzer wants to know before trying to use an
SpirvTools object constructed with a fuzzed parameter.
Upgrade to VulkanKHR memory model
* Converts Logical GLSL450 memory model to Logical VulkanKHR
* Adds extension and capability
* Removes deprecated decorations and replaces them with appropriate
flags on downstream instructions
* Support for Workgroup upgrades
* Support for copy memory
* Adding support for image functions
* Adding barrier upgrades and tests
* Use QueueFamilyKHR scope instead of device
Fixes https://crbug.com/906669
* Don't free diagnostics in spvBinaryParse
* When invoking the parser we wish to ignore the error messages from,
instead create a hijacked context and replace the message consumer with
a null consumer
Adds validator option to specify scalar block layout rules.
Both VK_KHR_relax_block_layout and VK_EXT_scalar_block_layout can be
enabled at the same time. But scalar block layout is as permissive
as relax block layout.
Also, scalar block layout does not require padding at the end of a
struct.
Add test for scalar layout testing ArrayStride 12 on array of vec3s
Cleanup: The internal getSize method does not need a round-up argument,
so remove it.
These are bookend passes designed to help preserve line information
across passes which delete, move and clone instructions. The propagation
pass attaches a debug line instruction to every instruction based on
SPIR-V line propagation rules. It should be performed before optimization.
The redundant line elimination pass eliminates all line instructions
which match the previous line instruction. This pass should be performed
at the end of optimization to reduce physical SPIR-V file size.
Fixes#2027.
* Add base and core bindless validation instrumentation classes
* Fix formatting.
* Few more formatting fixes
* Fix build failure
* More build fixes
* Need to call non-const functions in order.
Specifically, these are functions which call TakeNextId(). These need to
be called in a specific order to guarantee that tests which do exact
compares will work across all platforms. c++ pretty much does not
guarantee order of evaluation of operands, so any such functions need to
be called separately in individual statements to guarantee order.
* More ordering.
* And more ordering.
* And more formatting.
* Attempt to fix NDK build
* Another attempt to address NDK build problem.
* One more attempt at NDK build failure
* Add instrument.hpp to BUILD.gn
* Some name improvement in instrument.hpp
* Change all types in instrument.hpp to int.
* Improve documentation in instrument.hpp
* Format fixes
* Comment clean up in instrument.hpp
* imageInst -> image_inst
* Fix GetLabel() issue.
* Validate the id bound.
Validates that the id bound for the module is not larger than the max id
bound. Also adds an option to set the max id bound. Allows the
optimizer option to set the max id bound to also set the id bound for
the validation run done by the optimizer.
Fixes#2030.
When building C code with gcc and the
-Wstrict-prototypes option, function declarations
and definitions that don't specify their argument
types generate warnings. Functions that don't
take parameters need to specify (void) as their
parameter list, rather than leaving it empty.
Note this only applies to C, so only the functions
exported in C-compatible headers need fixing. In
C++ functions can't be declared/defined without a
parameter list, so C++ can safely allow an empty
parameter list to imply (void).
* Create a new entry point for the optimizer
Creates a new struct to hold the options for the optimizer, and creates
an entry point that take the optimizer options as a parameter.
The old entry point that takes validator options are now deprecated.
The validator options will be one of the optimizer options.
Part of the optimizer options will also be the upper bound on the id bound.
* Add a command line option to set the max value for the id bound. The default is 0x3FFFFF.
* Modify `TakeNextIdBound` to return 0 when the limit is reached.
* Run the validator in the optimization fuzzers.
The optimizers assumes that the input to the optimizer is valid. Since
the fuzzers do not check that the input is valid before passing the
spir-v to the optimizer, we are getting a few errors.
The solution is to run the validator in the optimizer to validate the
input.
For the legalization passes, we need to add an extra option to the
validator to accept certain types of variable pointers, even if the
capability is not given. At the same time, we changed the option
"--legalize-hlsl" to relax the validator in the same way instead of
turning it off.
* Combines OpAccessChain, OpInBoundsAccessChain, OpPtrAccessChain and
OpInBoundsPtrAccessChain
* New folding rule to fold add with 0 for integers
* Converts to a bitcast if the result type does not match the operand
type
V
This re-implements the -Oconfig=<file> flag to use a new API that takes
a list of command-line flags representing optimization passes.
This moves the processing of flags that create new optimization passes
out of spirv-opt and into the library API. Useful for other tools that
want to incorporate a facility similar to -Oconfig.
The main changes are:
1- Add a new public function Optimizer::RegisterPassesFromFlags. This
takes a vector of strings. Each string is assumed to have the form
'--pass_name[=pass_args]'. It creates and registers into the pass
manager all the passes specified in the vector. Each pass is
validated internally. Failure to create a pass instance causes the
function to return false and a diagnostic is emitted to the
registered message consumer.
2- Re-implements -Oconfig in spirv-opt to use the new API.
Fixes#937
Stop std140/430 validation when runtime array is encountered.
Check for standard uniform/storage buffer layout instead of std140/430.
Added validator command line switch to skip block layout checking.
Validate structs decorated as Block/BufferBlock only when they
are used as variable with storage class of uniform or push
constant.
Expose --relax-block-layout to command line.
dneto0 modification:
- Use integer arithmetic instead of floor.
Add SPV_ENV_WEBGPU_0 for work-in-progress WebGPU.
val: Disallow OpUndef in WebGPU env
Silence unused variable warnings when !defined(SPIRV_EFFCE)
Limit visibility of validate_instruction.cpp's symbols
Only InstructionPass needs to be visible so all other functions are put
in an anonymous namespace inside the libspirv namespace.
Currently it's impossible for external code to register a pass because
the only source file that can create pass tokens is optimizer.cpp. This
makes it hard to add passes that can't be upstreamed since you can't run
them from the usual pass sequence without reimplementing Optimizer.
This change adds a PassToken constructor that takes unique_ptr to
opt::Pass; if out-of-tree code implements opt::Pass it can register a
custom pass without having to add it to SPIRV-Tools source code.
Removes the limit on scalar replacement for the lagalization passes.
This is done by adding an option to the pass (and command line option)
to set the limit on maximum size of the composite that scalar
replacement is willing to divide.
Fixes#1494.
We have already disabled common uniform elimination because it created
sequences of loads an entire uniform object, then we extract just a
single element. This caused problems in some drivers, and is just
generally slow because it loads more memory than needed.
However, there are other way to get into this situation, so I've added
a pass that looks specifically for this pattern and removes it when only
a portion of the load is used.
Fixes#1547.
This pass will look for adjacent loops that are compatible and legal to
be fused.
Loops are compatible if:
- they both have one induction variable
- they have the same upper and lower bounds
- same initial value
- same condition
- they have the same update step
- they are adjacent
- there are no break/continue in either of them
Fusion is legal if:
- fused loops do not have any dependencies with dependence distance
greater than 0 that did not exist in the original loops.
- there are no function calls in the loops (could have side-effects)
- there are no barriers in the loops
It will fuse all such loops as long as the number of registers used for
the fused loop stays under the threshold defined by
max_registers_per_loop.
Adds support for spliting loops whose register pressure exceeds a user
provided level. This pass will split a loop into two or more loops given
that the loop is a top level loop and that spliting the loop is legal.
Control flow is left intact for dead code elimination to remove.
This pass is enabled with the --loop-fission flag to spirv-opt.
Introduce a pass that does a DCE type analysis for vector elements
instead of the whole vector as a single element.
It will then rewrite instructions that are not used with something else.
For example, an instruction whose value are not used, even though it is
referenced, is replaced with an OpUndef.
For each loop in a function, the pass walks the loops from inner to outer most loop
and tries to peel loop for which a certain amount of iteration can be done before or after the loop.
To limit code growth, peeling will not happen if the growth in code size goes above a configurable threshold.
When building C code with gcc and the
-Wstrict-prototypes option, function declarations
and definitions that don't specify their argument
types generate warnings. Functions that don't
take parameters need to specify (void) as their
parameter list, rather than leaving it empty.
Note this only applies to C, so only the functions
exported in C-compatible headers need fixing. In
C++ functions can't be declared/defined without a
parameter list, so C++ can safely allow an empty
parameter list to imply (void).
The sprir-v generated from HLSL code contain many copyies of very large
arrays. Not only are these time consumming, but they also cause
problems for drivers because they require too much space.
To work around this, we will implement an array copy propagation. Note
that we will not implement a complete array data flow analysis in order
to implement this. We will be looking for very simple cases:
1) The source must never be stored to.
2) The target must be stored to exactly once.
3) The store to the target must be a store to the entire array, and be a
copy of the entire source.
4) All loads of the target must be dominated by the store.
The hard part is keeping all of the types correct. We do not want to
have to do too large a search to update everything, which may not be
possible, do we give up if we see any instruction that might be hard to
update.
Also in types.h, the element decorations are not stored in an std::map.
This change was done so the hashing algorithm for a Struct is
consistent. With the std::unordered_map, the traversal order was
non-deterministic leading to the same type getting hashed to different
values. See |Struct::GetExtraHashWords|.
Contributes to #1416.
This patch adds a new option --time-report to spirv-opt. For each pass
executed by spirv-opt, the flag prints resource utilization for the pass
(CPU time, wall time, RSS and page faults)
This fixes issue #1378
This pass replaces the load/store elimination passes. It implements the
SSA re-writing algorithm proposed in
Simple and Efficient Construction of Static Single Assignment Form.
Braun M., Buchwald S., Hack S., Leißa R., Mallon C., Zwinkau A. (2013)
In: Jhala R., De Bosschere K. (eds)
Compiler Construction. CC 2013.
Lecture Notes in Computer Science, vol 7791.
Springer, Berlin, Heidelberg
https://link.springer.com/chapter/10.1007/978-3-642-37051-9_6
In contrast to common eager algorithms based on dominance and dominance
frontier information, this algorithm works backwards from load operations.
When a target variable is loaded, it queries the variable's reaching
definition. If the reaching definition is unknown at the current location,
it searches backwards in the CFG, inserting Phi instructions at join points
in the CFG along the way until it finds the desired store instruction.
The algorithm avoids repeated lookups using memoization.
For reducible CFGs, which are a superset of the structured CFGs in SPIRV,
this algorithm is proven to produce minimal SSA. That is, it inserts the
minimal number of Phi instructions required to ensure the SSA property, but
some Phi instructions may be dead
(https://en.wikipedia.org/wiki/Static_single_assignment_form).
We are seeing shaders that have multiple returns in a functions. These
functions must get inlined for legalization purposes; however, the
inliner does not know how to inline functions that have multiple
returns.
The solution we will go with it to improve the merge return pass to
handle structured control flow.
Note that the merge return pass will assume the cfg has been cleanedup
by dead branch elimination.
Fixes#857.
Previously we keep a separate static grammar table for opcodes/
operands per SPIR-V version. This commit changes that to use a
single unified static grammar table for opcodes/operands.
This essentially changes how grammar facts are queried against
a certain target environment. There are only limited filtering
according to the desired target environment; a symbol is
considered as available as long as:
1. The target environment satisfies the minimal requirement of
the symbol; or
2. There is at least one extension enabling this symbol.
Note that the second rule assumes the extension enabling the
symbol is indeed requested in the SPIR-V code; checking that
should be the validator's work.
Also fixed a few grammar related issues:
* Rounding mode capability requirements are moved to client APIs.
* Reserved symbols not available in any extension is no longer
recognized by assembler.
