in 3943 the new tests should have failed, but didn't due to the AnyVUID
check not handling case with trailing whitespace. Added trimming to handle
it as easily might happen again in future
Currently the validator, when checking an instruction is in the correct
section, always advances the current section. This means if we have an
instruction from a previous section we'll end up reporting it as invalid
in a function definition. This error is confusing.
This CL updates the validator to check if the given opcode is from a
previous layout section before advancing the current section. If it is
from a previous layout section an error is emitted.
The Vulkan 1.2.152 headers/spec now include Valid Usage IDs (VUID)
for every BuiltIn. This change adds labeling to help aid tracking
the coverage gap in Vulkan targeted validation. This is done with
a script in the Validation Layers that parses the source for VUID
strings, both that there is an implementation and a test for it.
There are 2 main changes:
1. A VUID string is added where applicable. It is wrapped in a function
that at runtimes checks if Vulkan is the target so that other targets
will not be effected as the output error only changes for Vulkan and
the overhead only occurs if there is an error at all.
2. For unit test, a new parameter value was added to allow make sure
that for each VUID there is a matching test. There are cases where the
same unit test checks multiple VUs via the parameter feature of gtest.
For this, I added a custom gMock Matcher to simply loop over a list
of VUID strings
Add support for SPV_KHR_non_semantic_info
This entails a couple of changes:
- Allowing unknown OpExtInstImport that begin with the prefix `NonSemantic.`
- Allowing OpExtInst that reference any of those sets to contain unknown
ext inst instruction numbers, and assume the format is always a series of IDs
as guaranteed by the extension.
- Allowing those OpExtInst to appear in the types/variables/constants section.
- Not stripping OpString in the --strip-debug pass, since it may be referenced
by these non-semantic OpExtInsts.
- Stripping them instead in the --strip-reflect pass.
* Add adjacency validation of non-semantic OpExtInst
- We validate and test that OpExtInst cannot appear before or between
OpPhi instructions, or before/between OpFunctionParameter
instructions.
* Change non-semantic extinst type to single value
* Add helper function spvExtInstIsNonSemantic() which will check if the extinst
set is non-semantic or not, either the unknown generic value or any future
recognised non-semantic set.
* Add test of a complex non-semantic extinst
* Use DefUseManager in StripDebugInfoPass to strip some OpStrings
* Any OpString used by a non-semantic instruction cannot be stripped, all others
can so we search for uses to see if each string can be removed.
* We only do this if the non-semantic debug info extension is enabled, otherwise
all strings can be trivially removed.
* Silence -Winconsistent-missing-override in protobufs
Fixes#2669
* Check capabilities when validating variables
* validate load and store types
* Constant check
* Don't checks pointers for stores, constants and loads
* Validate composite instructions
* Validate conversions for 8- and 16-bit limited types
* Unified tests and expanded them
* Disallow OpCopyMemory
* new tests and update old tests
It is currently not possible to use an Image Format that is
not Unknown without requiring a capability forbidden by the
OpenCL environment. As such the validation of Image Format
currently leans on capability validation entirely.
Fixes#2592.
Signed-off-by: Kevin Petit <kevin.petit@arm.com>
* Make pointers to logically matching types interchangeable with option.
DXC will be generating code where the function parameters will be a more
generic type that the actual parameter. They should be logically
matching and the decorations of the actual parameter must be a superset
of the decorations of the formal parameter.
We want to accept this code with an options so that spirv-opt can then
inline and fix the type mismatch. We will accept this under a new
options `--before-hlsl-legalization`.
The new option will also imply `relax-logical-pointer` so that HLSL
frontends will need to use just the one more generic option.
Moved the |LogicallyMatches| to the validation state to make it
available in more places. Also added a parameter to have it check the
decorations. I did not do a separate function for the decorations
because checking the decorations involves making sure the types
logically match anyway.
Fixes#2535
* SPIR-V 1.4 headers, add SPV_ENV_UNIVERSAL_1_4
* Support --target-env spv1.4 in help for command line tools
* Support asm/dis of UniformId decoration
* Validate UniformId decoration
* Fix version check on instructions and operands
Also register decorations used with OpDecorateId
* Extension lists can differ between enums that match
Example: SubgroupMaskEq vs SubgroupMaskEqKHR
* Validate scope value for Uniform decoration, for SPIR-V 1.4
* More unioning of exts
* Preserve grammar order within an enum value
* 1.4: Validate OpSelect over composites
* Tools default to 1.4
* Add asm/dis test for OpCopyLogical
* 1.4: asm/dis tests for PtrEqual, PtrNotEqual, PtrDiff
* Basic asm/Dis test for OpCopyMemory
* Test asm/dis OpCopyMemory with 2-memory access
Add asm/dis tests for OpCopyMemorySized
Requires grammar update to add second optional memory access operand
to OpCopyMemory and OpCopyMemorySized
* Validate one or two memory accesses on OpCopyMemory*
* Check av/vis on CopyMemory source and target memory access
This is a proposed rule. See
https://gitlab.khronos.org/spirv/SPIR-V/issues/413
* Validate operation for OpSpecConstantOp
* Validate NonWritable decoration
Also permit NonWritable on members of UBO and SSBO.
* SPIR-V 1.4: NonWrtiable can decorate Function and Private vars
* Update optimizer CLI tests for SPIR-V 1.4
* Testing tools: Give expected SPIR-V version in message
* SPIR-V 1.4 validation for entry point interfaces
* Allow only unique interfaces
* Allow all global variables
* Check that all statically used global variables are listed
* new tests
* Add validation fixture CompileFailure
* Add 1.4 validation for pointer comparisons
* New tests
* Validate with image operands SignExtend, ZeroExtend
Since we don't actually know the image texel format, we can't fully
validate. We need more context.
But we can make sure we allow the new image operands in known-good
cases.
* Validate OpCopyLogical
* Recursively checks subtypes
* new tests
* Add SPIR-V 1.4 tests for NoSignedWrap, NoUnsignedWrap
* Allow scalar conditions in 1.4 with OpSelect
* Allows scalar conditions with vector operands
* new tests
* Validate uniform id scope as an execution scope
* Validate the values of memory and execution scopes are valid scope
values
* new test
* Remove SPIR-V 1.4 Vulkan 1.0 environment
* SPIR-V 1.4 requires Vulkan 1.1
* FIX: include string for spvLog
* FIX: validate nonwritable
* FIX: test case suite for member decorate string
* FIX: test case for hlsl functionality1
* Validation test fixture: ease debugging
* Use binary version for SPIR-V 1.4 specific features
* Switch checks based on the SPIR-V version from the target environment
to instead use the version from the binary
* Moved header parsing into the ValidationState_t constructor (where
version based features are set)
* Added new versions of tests that assemble a 1.3 binary and validate a
1.4 environment
* Fix test for update to SPIR-V 1.4 headers
* Fix formatting
* Ext inst lookup: Add Vulkan 1.1 env with SPIR-V 1.4
* Update spirv-val help
* Operand version checks should use module version
Use the module version instead of the target environment version.
* Fix comment about two-access form of OpCopyMemory
Changing the stored value for a sampled image consumer to be the
instruction instead of result ID, since not all instructions have
result IDs. Using result IDs led to a potential crash when using
OpReturnValue, which doesn't have a result ID. OpReturnValue is not a
legal consumer, but the validator needs to look at the instruction to
determine this, thus storing the pointer to the instruction, instead
of trying to fetch the pointer using the instruction.
Issue #1528 covers fixing the check.
Fixes#2463
* Only check for binding and descriptor set on variables that are
statically used by an entry point
* updated tests and added a couple new ones
* new method for collecting entry points that statically reference an
id
This CL changes the id/name output from the validator to always use a
consistent id[%name] style. This removes the need for getIdOrName. The
name lookup is changed to use the NameMapper so the output is consistent
with what the disassembler will produce.
Fixes#2137
Fixes https://crbug.com/906669
* Don't free diagnostics in spvBinaryParse
* When invoking the parser we wish to ignore the error messages from,
instead create a hijacked context and replace the message consumer with
a null consumer
Ban sequentially consistent with VulkanKHR
* Added validation check that SequentiallyConsistent memory semantics
are not used if the memory model is VulkanKHR
* Added tests
* Fixed a bug in evaluating constant 32-bit integers and updated some
handling to avoid inferring a value from a spec constant default
Remaining memory semantics validation
* Adds checks that OutputMemoryKHR, MakeAvailableKHR and MakeVisibleKHR
are only used if the VulkanMemoryModelKHR capabailty is present
* Added checks that MakeAvailableKHR requires release semantics
* Added checks that MakeVisibleKHR requires acquire semantics
* Added checks that MakeAvailableKHR and MakeVisibleKHR require a
storage class
The SPV_KHR_8bit_storage extension does not permit 8-bit integers to be
cast directly to floating point types. We are seeing shaders in the
wild, being produced by toolchains like glslang, that are generating
invalid SPIR-V.
This change adds validation to check for the patterns not permitted, and
some tests that expose the failure.
This commit will change the message for unknown extensions from an error
to a warning.
Code was added to limit the number of warning messages so that consummer
of the messages are not overwhelmed. This is standard practice in
compilers.
Many other issues were found at while looking into this. They have been
documented in #1950.
Fixes http://crbug.com/875547.
* Replaced uses in opcode validation of current_function()
* Added non-const accessor to function lookup in ValidationState_t
* Updated a couple bad tests due to check reordering
This CL moves most of the logic out of validation ProcessInstruction and
groups it into validate. This places all of the validation logic in the
same place making it clearer what is running.
The Instruction class is changed to allow setting the function and block
after creation.
The instruction counter is the same as the size of the
ordered_instruction list when we insert a new instruction. This Cl
removes instruction_counter_ and uses that instead.
Many of the files have using std::<foo> statements in them, but then the
use of <foo> will be inconsistently std::<foo> or <foo> scattered
through the file. This CL removes all of the using statements and
updates the code to have the required std:: prefix.
This CL removes the two diag() overloads and leaves only the version
which accepts an Instruction. This is safer as we never use the
implicit location from the validation state.
This CL removes the two deque's from ValidationState and converts them
into std::vectors. In order to maintain the stability of instructions we
walk over the binary and counter the instructions and functions in the
ValidationState constructor and reserve the required number of items in
the module_functions_ and ordered_instructions_ vectors.
Issue #1176.
This CL changes the signature of diag() to accept an Instruction instead
of the instructions position.
A deprecated variant that accepts the position is available but will be
removed in the near future.
Currently, some instructions will be missing from the list of
ordered_instructions. This will cause issues due to the debug change
which passed the last instruction into subsequent passes.
This CL moves the addition to the ordered list out of the
RegisterInstruction method into AddOrderedInstruction. This method is
called first in ProcessInstruction and the CapabilitiesPass and IdPass
are updated to take an Instruction parameter.
- Vulkan 1.0 uses strict layout rules
- Vulkan 1.0 with relaxed-block-layout validator option
enforces all rules except for the relaxation of vector
offset.
- Vulkan 1.1 and later always supports relaxed block layout
Add spot check tests for the relaxed-block-layout scenarios.
Fixes#1697
Other environments do not.
Add tests for OpenGL 4.5 and SPIR-V universal 1.0 to ensure
they still check monotonic layout.
For universal 1.0, we're assuming it otherwise follows Vulkan
rules for block layout.
Fixes#1685
For the instructions which execute after the IdPass check we can provide
the Instruction instead of the spv_parsed_instruction_t. This
Instruction class provides a bit more context (like the source line)
that is not available from spv_parsed_instruction_t.
This CL moves the validation code to the val:: namespace. This makes it
clearer which instance of the Instruction and other classes are being
referred too.
- Add asm/dis test for SPV_KHR_8bit_storage
- validator: SPV_KHR_8bit_storage capabilities enable declaration of 8bit int
TODO:
- validator: ban arithmetic on 8bit unless Int8 is enabled
Covered by https://github.com/KhronosGroup/SPIRV-Tools/issues/1595
Produce better error diagnostics in the CFG validation.
This CL fixes up several issues with the diagnostic error line output
in the CFG validation code. For the cases where we can determine a
better line it has been output. For other cases, we removed the
diagnostic line and the error line number from the results.
Fixes#1657
Add SPV_ENV_WEBGPU_0 for work-in-progress WebGPU.
val: Disallow OpUndef in WebGPU env
Silence unused variable warnings when !defined(SPIRV_EFFCE)
Limit visibility of validate_instruction.cpp's symbols
Only InstructionPass needs to be visible so all other functions are put
in an anonymous namespace inside the libspirv namespace.
[val] Add extra context to error messages.
This CL extends the error messages produced by the validator to output the
disassembly of the errored line.
The validation_id messages have also been updated to print the line number of
the error instead of the word number. Note, the error number is from the start
of the SPIR-V, it does not include any headers printed in the disassembled code.
Fixes#670, #1581
Fixes#491
* Basic blocks now have a link to the terminator
* Check all case sepecific rules
* Missing check for branching into the middle of a case (#1618)
According to the SPIR-V Spec, section 2.4 Logical Layout of a Module there
should be a single required OpMemoryModel instruction provided. This CL adds
validation that OpMemoryModel is provided to the SPIR-V validator.
Fixes#1207