This makes it symmetric with the result type of ...->element_type which
returns a const Type.
So now we can write code like this:
analysis::Vector v = ...
analysis::Vector(v->element_type(), 2);
This fixes#2608.
The original test case had an out-of-bounds reference that ended up
folding into OpCompositeExtract that was indexing right outside the
constant composite.
The returned constant would then cause a segfault during constant
propagation.
Fixes#2764
* Don't replace all uses when simplifying instructions, instead only
update non-debug, non-decoration uses
* added a test
* Add a new version of RAUW that takes a predicate to decide whether to
replace the use or not
* used in simplification pass
* Fix#2609 - Handle out-of-bounds scalar replacements.
When SROA tries to do a replacement for an OpAccessChain that is exactly
one element out of bounds, the code was trying to access its internal
array of replacements and segfaulting.
This protects the code from doing this, and it additionally fixes the
way SROA works by not returning failure when it refuses to do a
replacement. Instead of failing the optimization pass, SROA will now
simply refuse to do the replacement and keep going.
Additionally, this patch fixes the SROA logic to now return a proper status so we can
correctly state that the pass made no changes to the IR if it only found
invalid references.
Merge return expects unreachable merge block to look a certain way, and
unreachable continue blocks to look a certain way. What if an
unreachable block is both a merge and a continue? The continue is
suppose to take precedent, but merge-return implements it with the merge
taking precedent. This change flips that around.
Fixes#2746
Similar to the existing 'add dead breaks' pass, this adds a pass to
add dead continues to blocks in loops where such a transformation is
viable. Various functionality common to this new pass and 'add dead
breaks' has been factored into 'fuzzer_util', and some small
improvements to 'add dead breaks' that were identified while reviewing
that code again have been applied.
Fixes#2719.
* Process OpDecorateId in ADCE
When there is an OpDecorateId instruction that is live,
the ids that is references must be kept live. This change
adds them to the worklist.
I've also updated a validator check to allow OpDecorateId
to be able to apply to decoration groups.
Fixes#1759.
* Remove dead code.
In merge return, we need to know the original dominator for a block in order to
traverse code from the original dominator to the new dominator and add
appropriate Phi nodes. The current code gets this wrong because the dominator
tree is build as needed. The first time we get the immediate dominator for a
function we just built the dominator tree and it takes into account that a
block has been split. The second time it does not.
This inconsistency needs to be fixed. We do that by recording the original
dominator for all blocks at the start of the pass.
If we were to record just the basic block, that could change if the block is
split. We want to traverse the code in the body of the original dominator,
whatever block it ends up in. To make this easy to track, we not save the
terminator instruction to represent the original dominator.
Fixes#2745
When a phi candidate is marked as trivial, we are suppose to update all
of its uses to the reference the value that it is being folded to.
However, the code updates the uses misses `defs_at_block_`. So at a
later time, the id for the trivial phi can reemerge.
Fixes#2744
* Bindless Instrument: Make init check depend solely on input_init_enabled
Previously was dependent on presense of descriptor_indexing extension
in SPIR-V, but this missed some cases. Tests updated to refect this new
policy.
* Fix format.
This change refactors all storage class validation for atomics
to reflect the similar refactoring in the specification.
It is currently not possible to write a test for the check
rejecting Generic in an OpenCL 1.2 environment as the required
GenericPointer capability isn't allowed there. I've decided
to keep the check nonetheless to guard against the capability
becoming available without the rules for atomics being updated.
The ID changes in existing tests aren't ideal but introducing
names drags in a substantial refactoring of this file.
Contributes to #2595.
Signed-off-by: Kevin Petit <kevin.petit@arm.com>
* Fix bug in merge return
The merge return pass seems to assume that the only new edges in the cfg
are from return block to merge blocks. However, it is possible that a
merge block branches to a merge block when it did not before.
This change add a new variable to track all of the new edges. It also
renames some other variables and cleans us the code to make it a bit
easier to read.
Fixes#2702.
Dead branch elimination needs to know about the constructs that a block is contained it when determining what to do with its merge instruction. We currently fold branches in block as we see them, which is parent constructs before their children. This causes the struct cfg analysis to crash because it tries to get the parent construct for a block after the parent has been folded.
This can be fixed by folding the branch of the children before the parents.
Fixes#2667.
There are a couple spots where we are not looking at decorations when we should.
1. Value numbering is suppose to assign a different value number to ids if they have different decorations. However that is not being done for OpCopyObject and OpPhi.
1. Instruction simplification is propagating OpCopyObject instruction without checking for decorations. It should only do that if no decorations are being lost.
Add a new function to the decoration manager to check if the decorations of one id are a subset of the decorations of another.
Fixes#2715.
Fixes#2669
* Check capabilities when validating variables
* validate load and store types
* Constant check
* Don't checks pointers for stores, constants and loads
* Validate composite instructions
* Validate conversions for 8- and 16-bit limited types
* Unified tests and expanded them
* Disallow OpCopyMemory
* new tests and update old tests
Adds to spirv-fuzz the option to shrink a sequence of transformations
that lead to an interesting binary to be generated, to find a smaller
sub-sequence of transformations that still lead to an interesting (but
hopefully simpler) binary being generated. The notion of what counts
as "interesting" comes from a user-provided script, the
"interestingness function", similar to the way the spirv-reduce tool
works. The shrinking process will give up after a maximum number of
steps, which can be configured on the command line.
Tests for the combination of fuzzing and shrinking are included, using
a variety of interestingness functions.
Inlining does not inline functions that have a single return that is in a loop. This is because the return cannot be replaced by a branch outside of the loop easily. Merge return knows how to rewrite the function so the return is replaced by a branch.
Fixes#2038.
It is illegal to inline an OpKill instruction into a continue construct because the continue header will no longer dominate the backedge.
This commit adds a check for this, and does not inline.
If we still want to be able to inline a function that contains an OpKill, we can add a new pass that will wrap OpKill instructions into its own function with just the single instruction.
I do not believe that this is a common case right now, so I will not do that yet.
Fixes#2433.
When working on descriptor indexing validation for compute shaders, the
gl_GlobalInvocationID builtin was being loaded as uint which would cause
compute shaders instrumented by the bindless check pass to have:
%83 = OpLoad %uint %gl_GlobalInvocationID
%84 = OpCompositeExtract %uint %83 0
%85 = OpCompositeExtract %uint %83 1
%86 = OpCompositeExtract %uint %83 2
which results in validation failures:
error: line 127: Reached non-composite type while indexes still remain
to be traversed.
%84 = OpCompositeExtract %uint %83 0
for trying to extract a uint from a uint.
Fixes#2621.
Instead of aborting when an invalid input fact is provided, the tool
now warns about the invalid fact and then ignores it. This is
convenient for example if facts are specified about uniforms with
descriptor sets and bindings that happen to not be present in the
input binary.
Fixes#2695. Allowing unreachable blocks to be moved can lead to an
unreachable block A getting placed after an unreachable successor B,
which is a problem if B uses ids that A generates.
* Replace global static map with an array of pairs
\#2687 introduced a global static map, which isn't allowed by
the style guide and caused an issue in DXC.
This change replaces it with an array of pairs.
Signed-off-by: Kévin Petit <kpet@free.fr>
* Replace constexpr with const
Signed-off-by: Kévin Petit <kpet@free.fr>
Several tools take a --target-env option to specify the SPIR-V
environment to use. They all use spvParseTargetEnv to parse
the user-specified string and select the appropriate spv_target_env
but all tools list only _some_ of the valid values in their help
text.
This change makes the help text construction automatic from the
full list of valid values, establishing a single source of truth
for the values printed in the help text. The new utility function
added allows its user to specify padding and wrapping constraints
so the produced strings fits well in the various help texts.
Signed-off-by: Kévin Petit <kpet@free.fr>
* Represent uniform facts via descriptor set and binding.
Previously uniform facts were expressed with resepect to the id of a
uniform variable. Describing them with respect to a descriptor set
and binding is more convenient from the point of view of expressing
facts about a shader without requiring analysis of its SPIR-V.
* Fix equality testing for uniform buffer element descriptors.
The equality test now checks that the lengths of the index vectors
match. Added a test that exposes the previous omission.
Adds a new transformation that can replace a constant with a uniform known to have the same value, and adds a fuzzer pass that (a) replaces a boolean with a comparison of literals (e.g. replacing "true" with "42 > 24"), and then (b) obfuscates the literals appearing in this comparison by replacing them with identically-valued uniforms, if available.
The fuzzer_replayer test file has also been updated to allow initial facts to be provided, and to do error checking of the status results returned by the fuzzer and replayer components.
* Can only be used with Vulkan memory model
* Can only be used with atomics
* Bit setting must match for compare exchange opcodes
* Updated memory semantics checks to allow constant instructions
generally with CooperativeMatrixNV
The replayer takes an existing sequence of transformations and applies
them to a module. Replaying a sequence of transformations that were
obtained via fuzzing should lead to an identical module to the module
that was fuzzed. Tests have been added to check for this.
Adds a new (and first) kind of fact to the fact manager, which is that
a specific uniform value is guaranteed to be equal to a specific
constant. The point of this is that such information (if known to be
true by some external source) can be used by spirv-fuzz to transform
the module in interesting ways that a static compiler cannot reverse
via compile-time analysis.
This change introduces protobuf messages for the fact, and adds
capabilities to the fact manager to store this kind of fact and
provide information about it.
The transformation can, for example, replace "true" with "12.0 > 6.0",
if constants for those floating-point values are available.
This introduces a new 'id use descriptor' structure, which provides a
way to describe a particular use of an id, and which will be heavily
used in future transformations. Describing an id use is trivial if
the use occurs in an instruction that itself generates an id, but is
less straightforward if the id of interest is used by an instruction
such as OpStore that does not have a result id. The 'id use
descriptor' structure caters for such cases.
Also add a Builtin test generator variant that takes
capabilities and extensions.
Tests
- verify that the SMCountNV, SMIDNV, WarpsPerSMNV, and WarpIDNV Builtins are
accepted as Inputs in Vertex, Fragment, TessControl, TessEval, Geometry,
and Compute.
- verify that the SMCountNV, SMIDNV, WarpsPerSMNV, and WarpIDNV Builtins are
accepted as Inputs in MeshNV and TaskNV shaders.
- verify that the SMCountNV, SMIDNV, WarpsPerSMNV, and WarpIDNV Builtins are
accepted as Inputs in the 6 ray tracing stages
- verify that the SMCountNV, SMIDNV, WarpsPerSMNV, and WarpIDNV Builtins are
NOT accepted as Outputs.
- verify that the SMCountNV, SMIDNV, WarpsPerSMNV, and WarpIDNV Builtins are
NOT accepted as non-scalar integers (f32, uvec3)
- verify that the SMCountNV, SMIDNV, WarpsPerSMNV, and WarpIDNV Builtins are
NOT accepted as non-32-bit integers (u64)
There turned out to be a bug in the 'split blocks' transformation due
to blocks being split while they were being iterated over. This
change fixes that issue, and adds tests that were able to expose the
issue by running the fuzzer on some example shaders.
When it's an OpConstant or OpSpecConstant, then the literal
values are compared. If the OpSpecConstant also has a SpecId
decoration, then that's also compared.
Otherwise, it's an OpSpecConstantOp and we only compare the
ID of the OpSpecConstantOp instruction itself.
Fixes#2649
This new pass adds some basic ingredients to a module on which future
passes are likely to depend, such as boolean constants and some
specfic integer and floating-point values. This is not a fuzzer pass
in the true sense in that it does not employ randomization, but it
makes sense to define it as a fuzzer pass since it is the first of a
number of transformations passes that the fuzzer will run on a module.
* Types: Avoid comparing IDs for in Type::IsSameImpl
When linking, we end up with duplicate types for imported and exported
types, that needs to be removed. The current code would reject valid
import/export pairs of symbols due to IDs mismatch, even if the types or
constants behind those ID were the same.
Enabled remaining type_match_test
Fixes#2442
New version has additional word in stage-specific section. Also
some changes in content for tesselation and compute shaders. Either
version can be invoked at pass creation. This is done to ease integration
and updating of validation layers. Version 1 is deprecated and eventually
will go away.
Also sneaking in fix to version 1 compute shaders.
With this pass, the fuzzer can split blocks in the input module. This
is mainly useful in order to give other (future) transformations more
opportunities to apply.
* Handle nested breaks from switches.
There was a recent decision made to allow branches to the merge node of
a switch even if the switch is not the first enclosing construct. They
can be generated by glslang from break statements in switches.
Dead branch elimination seems to be the only optimization that will
break because of this change, so I will update that optimizations.
The change made are:
- Track switches in structured cfg analysis.
- In Dead branch elimination:
- Look for nested breaks that will require a switch instruction.
- Rewrite, but don't delete, switchs that are required even if it
could be replaced by an unconditional branch.
- When looking for the first break, consider the merge of a switch
as well.
See #2612.
* Fix variable names and comments.
* Add tests for the struct cfg analysis and switches.
* Fix typos in comments.
Adds a library for spirv-fuzz, consisting of a Fuzzer class that will
transform a module with respect to (a) facts about the module provided
via a FactManager class, and (b) a source of random numbers and
parameters to control the transformation process provided via a
FuzzerContext class. Transformations will be applied via classes that
implement a FuzzerPass interface, and both facts and transformations
will be represented via protobuf messages. Currently there are no
concrete facts, transformations nor fuzzer passes; these will follow.
Fixes#2604
* Allow selection constructs to branch to the nearest selection merge
whose header is terminated by an OpSwitch
* Cleanup break and continue checks generally
* add tests
In order to try to reduce code duplication and to be able
to fold more cases, we want to use the instruction folder
when folding an OpSpecConstantOp with constant operands.
A couple other changes are need to make this work. First
GetDefiningInstruction| in the constant manager is able
to handle |type_id| being logically equivalent to another
type, so we updated the interface, and removed the assert.
Some tests were also updated because we not generate
better code because constants are not duplicated as much
as before.
No need for new tests. The functionality of the instruction folder is
already tested. There are tests check that the instruction folder is
being used correctly for OpCompositeExtract and OpVectorShuffle in the
existing test cases.
Fixes#2585.
It is currently not possible to use an Image Format that is
not Unknown without requiring a capability forbidden by the
OpenCL environment. As such the validation of Image Format
currently leans on capability validation entirely.
Fixes#2592.
Signed-off-by: Kevin Petit <kevin.petit@arm.com>
Validate structured exits from constructs
* Add checks that exits from a construct are valid
* Add Construct::IsStructuredExit()
* uses specific rules for each type of construct
* Added a test and check for #2213
* Adding tests for bad loop and continue exits
* Fix identification of continue block that prevented some selections
from having any blocks
* Update memory model support for SPIR-V 1.4
Fixes#2552
* Upgrade memory model now supports two memory access operands for
OpCopyMemory*
* in all cases the pass will first generate two operands by either
adding them or copying
* updates accounts for multiple operands
* tests
There is a case where sroa is not handling id overflow gracefully. It
is handled and an error message is output when the ids overflow.
Fixes https://crbug.com/961030.
* Make pointers to logically matching types interchangeable with option.
DXC will be generating code where the function parameters will be a more
generic type that the actual parameter. They should be logically
matching and the decorations of the actual parameter must be a superset
of the decorations of the formal parameter.
We want to accept this code with an options so that spirv-opt can then
inline and fix the type mismatch. We will accept this under a new
options `--before-hlsl-legalization`.
The new option will also imply `relax-logical-pointer` so that HLSL
frontends will need to use just the one more generic option.
Moved the |LogicallyMatches| to the validation state to make it
available in more places. Also added a parameter to have it check the
decorations. I did not do a separate function for the decorations
because checking the decorations involves making sure the types
logically match anyway.
Fixes#2535
* Use grammar last version
Fixes#2560
* Parse last version and use it in checks
* Update grammar header generation
* Fix NonWritable tests
* Fix check and add specific tests
Fixes#2555
* Fix a bug in validation where interfaces were considered non-unique
between different entry points targeting the same function
* added a test
* Update private to local pass to remove localized private variables
from entry point interfaces
* added tests
Fixes#2551
* Add support for 1.4 entry point interface lists
* only input and output variables are automatically live
* can clean up interfaces after DCE
* added tests
* allow opt tests to specify a target environment
* SPIR-V 1.4 headers, add SPV_ENV_UNIVERSAL_1_4
* Support --target-env spv1.4 in help for command line tools
* Support asm/dis of UniformId decoration
* Validate UniformId decoration
* Fix version check on instructions and operands
Also register decorations used with OpDecorateId
* Extension lists can differ between enums that match
Example: SubgroupMaskEq vs SubgroupMaskEqKHR
* Validate scope value for Uniform decoration, for SPIR-V 1.4
* More unioning of exts
* Preserve grammar order within an enum value
* 1.4: Validate OpSelect over composites
* Tools default to 1.4
* Add asm/dis test for OpCopyLogical
* 1.4: asm/dis tests for PtrEqual, PtrNotEqual, PtrDiff
* Basic asm/Dis test for OpCopyMemory
* Test asm/dis OpCopyMemory with 2-memory access
Add asm/dis tests for OpCopyMemorySized
Requires grammar update to add second optional memory access operand
to OpCopyMemory and OpCopyMemorySized
* Validate one or two memory accesses on OpCopyMemory*
* Check av/vis on CopyMemory source and target memory access
This is a proposed rule. See
https://gitlab.khronos.org/spirv/SPIR-V/issues/413
* Validate operation for OpSpecConstantOp
* Validate NonWritable decoration
Also permit NonWritable on members of UBO and SSBO.
* SPIR-V 1.4: NonWrtiable can decorate Function and Private vars
* Update optimizer CLI tests for SPIR-V 1.4
* Testing tools: Give expected SPIR-V version in message
* SPIR-V 1.4 validation for entry point interfaces
* Allow only unique interfaces
* Allow all global variables
* Check that all statically used global variables are listed
* new tests
* Add validation fixture CompileFailure
* Add 1.4 validation for pointer comparisons
* New tests
* Validate with image operands SignExtend, ZeroExtend
Since we don't actually know the image texel format, we can't fully
validate. We need more context.
But we can make sure we allow the new image operands in known-good
cases.
* Validate OpCopyLogical
* Recursively checks subtypes
* new tests
* Add SPIR-V 1.4 tests for NoSignedWrap, NoUnsignedWrap
* Allow scalar conditions in 1.4 with OpSelect
* Allows scalar conditions with vector operands
* new tests
* Validate uniform id scope as an execution scope
* Validate the values of memory and execution scopes are valid scope
values
* new test
* Remove SPIR-V 1.4 Vulkan 1.0 environment
* SPIR-V 1.4 requires Vulkan 1.1
* FIX: include string for spvLog
* FIX: validate nonwritable
* FIX: test case suite for member decorate string
* FIX: test case for hlsl functionality1
* Validation test fixture: ease debugging
* Use binary version for SPIR-V 1.4 specific features
* Switch checks based on the SPIR-V version from the target environment
to instead use the version from the binary
* Moved header parsing into the ValidationState_t constructor (where
version based features are set)
* Added new versions of tests that assemble a 1.3 binary and validate a
1.4 environment
* Fix test for update to SPIR-V 1.4 headers
* Fix formatting
* Ext inst lookup: Add Vulkan 1.1 env with SPIR-V 1.4
* Update spirv-val help
* Operand version checks should use module version
Use the module version instead of the target environment version.
* Fix comment about two-access form of OpCopyMemory
Add functionality to fix-storage-class so that it can fix up mismatched
data types for pointers as well.
Fixes bugs in when fixing up storage class.
Move GenerateCopy to the Pass class to be reused.
The spirv-opt change for #2535.
* Change implementation of post order CFG traversal
It seems like the recursion is going very deep, and causing some problem
is particular situations. I've reimplemented the CFG post order
traversal to not use recursion.
Fixes#2539.
There was a bit shift done on 32-bit values, but they should have been
done on 64-bit values. This is fixed. At the same time, uses of size_t
are repalaced by uint64_t to ensure these values are 64-bit.
A test case cannot be created because the code that was change is not
run at the moment since we do not split up vectors or matricies. I do
not want to delete the code because I like to experitment with it every
once in a while.
Fixes#2528.
These are not called/referenced by anything, and are marked as being
unused. They were brought to my attention by a coverity based bug
report.
Fixes#2537
Window still had a limit of 260 chars for file paths. Visual C++ create
directories and file names based on the cmake target names, so if they are
too long, the windows build will fail.
This is not a problem for spirv-tools on its own, but the files names
currently go up to 220 characters for some spirv-tools files when built as
part of VK-GL-CTS. This change will get it back down to 190, leaving more
space for the directory that will contain VK-GL-CTS.
This is fixing an issue reported against the VK-GL-CTS.
Recent change to the spec restricted the valid values for Memory
Semantics in OpAtomics* in the WebGPU env. Implementing enforcing
these changes.
Fixes#2499
WebGPU requires certain variables to be initialized, whereas there are
known issues with using initializers in Vulkan. This PR is the first
of three implementing a pass to decompose initialized variables into
a variable declaration followed by a store. This has been broken up
into multiple PRs, because there 3 distinct cases that need to be
handled, which require separate implementations.
This first PR implements the basic infrastructure that is needed, and
handling of Function storage class variables. Private and Output will
be handled in future PRs.
This is part of resolving #2388
* Fix#2320. `conditional_branch_to_simple_conditional_branch` reduction pass changes conditional branches so both targets point to the same block id (creating a "simple" conditional branch).
* Fix#2501. `simple_conditional_branch_to_branch` reduction pass changes "simple" conditional branches to branches.
* Fix#2503. `conditional_branch_to_simple_conditional_branch` proper handling of back-edges.
In WebGPU, the component operand 0xFFFFFFFF is forbidden, but in
Vulkan it is used to indicate a value is undefined. When converting to
WebGPU, 0xFFFFFFFF needs to converted to a legal value, though the
specific one does not matter, since it was used to indicate an
undefined entry in the original code. Choosing to use 0, since the
operands are required to be on [0, N-1], so 0 is guaranteed to always
be valid.
Fixes#2349
Fixes#2470
* Only require the *WithoutFormat capabilities for Unknown image reads
and writes in the Vulkan environment
* update tests and add new vulkan specific tests
When -Wformat-security is enabled, we are getting an error. I do not
claim to fully understand when the warning is triggered or not, but this
one can be avoided by calling "Log" instead of "Logf" because the
formating string is not needed.
Renames the existing flag '--webgpu-mode' to '--vulkan-to-webgpu' for
the Vulkan->WebGPU operation, and adds a new flag '--webgpu-to-vulkan'
for the WebGPU->Vulkan operation.
Currently '--webgpu-to-vulkan' doesn't have any passes associated with
it yet, but further patches will implement them.
Fixes#2495
* opt/ir_loader: Don't silently drop unknown instructions on the floor
Currently, if spirv-opt sees an instruction it does not know, it will
silently ignore it and move to the next one. This changes it
to be an error, as dropping it on the floor is likely to generate
invalid SPIR-V output.
* opt/optimizer: Complain a bit louder for unexpected binary changes
If a binary change happens despite a pass saying that the binaries
should be identical, this is indicative of a bug in the pass itself.
This does not change behavior for it to be an error, but simply emits a warning in this case.
This pass tries to fix validation error due to a mismatch of storage classes
in instructions. There is no guarantee that all such error will be fixed,
and it is possible that in fixing these errors, it could lead to other
errors.
Fixes#2430.
Fixes#2452
Swaps priority of handling unreachable merge and continues so that the
back-edge is retained in the case a block is both a loop continue and
loop merge
* Check var pointer capability in ADCE.
* Check var ptr capability for common uniform.
* Check var ptr capability in access chain convert.
Since we want this pass to run even if there are variable pointer on
storage buffers, we had to remove asserts that assumed there were no
variable pointers. The functions with the asserts will now work, it
becomes the responsibility of the callers to deal with the output as
appropriate.
* Single block elimination and variable pointers.
It seems like the code in local single block elimination is able to
handle cases with variable pointers already. This is because the
function `HasOnlySupportedRefs` ensures that variables that feed a
variable pointer are not candidates.
* Single store elimination and variable pointers.
It seems like the code in local single stroe elimination is able to
handle cases with variable pointers already. This is because the
function `FindSingleStoreAndCheckUses` ensures that variables that feed
a variable pointer are not candidates.
* SSA rewriter and variable pointers.
It seems like the code in the two passes that call the SSA rewriter are
able to handle cases with variable pointers already. This is because the
function `HasOnlySupportedRefs` ensures that variables that feed
a variable pointer are not candidates.
Fixes#2458.
Fixes#2456
* When eliminating a structured construct that has an unreachable merge,
replace that unreachable terminator with an appropriate return
* New tests
Fixes#2488
* Validator doesn't identify back-edge of the loop, so the merge is
never set
* Construct::blocks() has safe uses of `merge` so the assert can be
removed
* Added a test
Fixes#2453
* Enable addition of OpPhi instructions when the loop has multiple
predecessors of the merge due to a break
* This can result in some values no longer dominating their uses
* Track return blocks in structured flow to produce OpPhis that have
multiple undef and non-undef arguments
* New tests to catch the bug
* When a block is predicated, mark the new body as a return if the old
block as already a return
* Fix#2478. The fix is to just not try to simplify such loops.
* Also added `BasicBlock::MergeBlockId()` and `BasicBlock::ContinueBlockId()`.
* Some minor changes to `structured_loop_to_selection_reduction_opportunity.cpp`.
* Added test.
Fix#2475. Fix#2476.
* Improve reducer algorithm: shrink granularity, remove an early return, no lazy initialization, notify pass if binary is interesting, add comments.
* Add fail-on-validation-error option to fail a reduction if an invalid state is reached; useful for tests.
* Set fail-on-validation-error in tests.
* Improve some documentation comments.
* Add Reducer::AddDefaultReductionPasses so tests (and other library consumers) can add the default reduction passes.
* Add CLIMessageConsumer in test_reduce so we can see messages for tricky tests.
* Remove test RemoveUnreferencedInstructionReductionPassTest_ApplyReduction because it was indirectly testing the reduction algorithm, not the RemoveUnreferencedInstruction pass.
* Tweak tests where needed.
Fix#2396
* Check that initial state is valid. Add kInitialStateInvalid.
* Fix RemoveOpnameAndRemoveUnreferenced test; turns out the original shader is invalid, but we never notice because we don't check this and the reduced shader is valid; fix original shader. Assert reduction status is kComplete.
* Always check return value from `Reducer::Run`.
* Change Reducer::Run to *not* immediately copy the input binary.
Changing the stored value for a sampled image consumer to be the
instruction instead of result ID, since not all instructions have
result IDs. Using result IDs led to a potential crash when using
OpReturnValue, which doesn't have a result ID. OpReturnValue is not a
legal consumer, but the validator needs to look at the instruction to
determine this, thus storing the pointer to the instruction, instead
of trying to fetch the pointer using the instruction.
Issue #1528 covers fixing the check.
Fixes#2463
If SPV_EXT_descriptor_indexing is enabled, add check that for a
descriptor-based reference, the descriptor is initialized. Initialization
data is stored in the debug input buffer, added to the length information
already there. This feature must be seperately enabled on the pass
creation routine. NOTE: Currently just supports image references; buffer
references are still TODO.
Adds an optimization pass to remove usages of AtomicCounterMemory
bit. This bit is ignored in Vulkan environments and outright forbidden
in WebGPU ones.
Fixes#2242
If relax-logical-pointer is enabled, this commit makes Validator
accept function param even when its Storage Class is different from
the expected one.
Related to #2423, #2430
