* Process OpDecorateId in ADCE
When there is an OpDecorateId instruction that is live,
the ids that is references must be kept live. This change
adds them to the worklist.
I've also updated a validator check to allow OpDecorateId
to be able to apply to decoration groups.
Fixes#1759.
* Remove dead code.
In merge return, we need to know the original dominator for a block in order to
traverse code from the original dominator to the new dominator and add
appropriate Phi nodes. The current code gets this wrong because the dominator
tree is build as needed. The first time we get the immediate dominator for a
function we just built the dominator tree and it takes into account that a
block has been split. The second time it does not.
This inconsistency needs to be fixed. We do that by recording the original
dominator for all blocks at the start of the pass.
If we were to record just the basic block, that could change if the block is
split. We want to traverse the code in the body of the original dominator,
whatever block it ends up in. To make this easy to track, we not save the
terminator instruction to represent the original dominator.
Fixes#2745
When a phi candidate is marked as trivial, we are suppose to update all
of its uses to the reference the value that it is being folded to.
However, the code updates the uses misses `defs_at_block_`. So at a
later time, the id for the trivial phi can reemerge.
Fixes#2744
* Bindless Instrument: Make init check depend solely on input_init_enabled
Previously was dependent on presense of descriptor_indexing extension
in SPIR-V, but this missed some cases. Tests updated to refect this new
policy.
* Fix format.
* Fix bug in merge return
The merge return pass seems to assume that the only new edges in the cfg
are from return block to merge blocks. However, it is possible that a
merge block branches to a merge block when it did not before.
This change add a new variable to track all of the new edges. It also
renames some other variables and cleans us the code to make it a bit
easier to read.
Fixes#2702.
Dead branch elimination needs to know about the constructs that a block is contained it when determining what to do with its merge instruction. We currently fold branches in block as we see them, which is parent constructs before their children. This causes the struct cfg analysis to crash because it tries to get the parent construct for a block after the parent has been folded.
This can be fixed by folding the branch of the children before the parents.
Fixes#2667.
There are a couple spots where we are not looking at decorations when we should.
1. Value numbering is suppose to assign a different value number to ids if they have different decorations. However that is not being done for OpCopyObject and OpPhi.
1. Instruction simplification is propagating OpCopyObject instruction without checking for decorations. It should only do that if no decorations are being lost.
Add a new function to the decoration manager to check if the decorations of one id are a subset of the decorations of another.
Fixes#2715.
Inlining does not inline functions that have a single return that is in a loop. This is because the return cannot be replaced by a branch outside of the loop easily. Merge return knows how to rewrite the function so the return is replaced by a branch.
Fixes#2038.
It is illegal to inline an OpKill instruction into a continue construct because the continue header will no longer dominate the backedge.
This commit adds a check for this, and does not inline.
If we still want to be able to inline a function that contains an OpKill, we can add a new pass that will wrap OpKill instructions into its own function with just the single instruction.
I do not believe that this is a common case right now, so I will not do that yet.
Fixes#2433.
When working on descriptor indexing validation for compute shaders, the
gl_GlobalInvocationID builtin was being loaded as uint which would cause
compute shaders instrumented by the bindless check pass to have:
%83 = OpLoad %uint %gl_GlobalInvocationID
%84 = OpCompositeExtract %uint %83 0
%85 = OpCompositeExtract %uint %83 1
%86 = OpCompositeExtract %uint %83 2
which results in validation failures:
error: line 127: Reached non-composite type while indexes still remain
to be traversed.
%84 = OpCompositeExtract %uint %83 0
for trying to extract a uint from a uint.
When it's an OpConstant or OpSpecConstant, then the literal
values are compared. If the OpSpecConstant also has a SpecId
decoration, then that's also compared.
Otherwise, it's an OpSpecConstantOp and we only compare the
ID of the OpSpecConstantOp instruction itself.
Fixes#2649
* Types: Avoid comparing IDs for in Type::IsSameImpl
When linking, we end up with duplicate types for imported and exported
types, that needs to be removed. The current code would reject valid
import/export pairs of symbols due to IDs mismatch, even if the types or
constants behind those ID were the same.
Enabled remaining type_match_test
Fixes#2442
New version has additional word in stage-specific section. Also
some changes in content for tesselation and compute shaders. Either
version can be invoked at pass creation. This is done to ease integration
and updating of validation layers. Version 1 is deprecated and eventually
will go away.
Also sneaking in fix to version 1 compute shaders.
* Handle nested breaks from switches.
There was a recent decision made to allow branches to the merge node of
a switch even if the switch is not the first enclosing construct. They
can be generated by glslang from break statements in switches.
Dead branch elimination seems to be the only optimization that will
break because of this change, so I will update that optimizations.
The change made are:
- Track switches in structured cfg analysis.
- In Dead branch elimination:
- Look for nested breaks that will require a switch instruction.
- Rewrite, but don't delete, switchs that are required even if it
could be replaced by an unconditional branch.
- When looking for the first break, consider the merge of a switch
as well.
See #2612.
* Fix variable names and comments.
* Add tests for the struct cfg analysis and switches.
* Fix typos in comments.
In order to try to reduce code duplication and to be able
to fold more cases, we want to use the instruction folder
when folding an OpSpecConstantOp with constant operands.
A couple other changes are need to make this work. First
GetDefiningInstruction| in the constant manager is able
to handle |type_id| being logically equivalent to another
type, so we updated the interface, and removed the assert.
Some tests were also updated because we not generate
better code because constants are not duplicated as much
as before.
No need for new tests. The functionality of the instruction folder is
already tested. There are tests check that the instruction folder is
being used correctly for OpCompositeExtract and OpVectorShuffle in the
existing test cases.
Fixes#2585.
* Update memory model support for SPIR-V 1.4
Fixes#2552
* Upgrade memory model now supports two memory access operands for
OpCopyMemory*
* in all cases the pass will first generate two operands by either
adding them or copying
* updates accounts for multiple operands
* tests
There is a case where sroa is not handling id overflow gracefully. It
is handled and an error message is output when the ids overflow.
Fixes https://crbug.com/961030.
Fixes#2555
* Fix a bug in validation where interfaces were considered non-unique
between different entry points targeting the same function
* added a test
* Update private to local pass to remove localized private variables
from entry point interfaces
* added tests
Fixes#2551
* Add support for 1.4 entry point interface lists
* only input and output variables are automatically live
* can clean up interfaces after DCE
* added tests
* allow opt tests to specify a target environment
* SPIR-V 1.4 headers, add SPV_ENV_UNIVERSAL_1_4
* Support --target-env spv1.4 in help for command line tools
* Support asm/dis of UniformId decoration
* Validate UniformId decoration
* Fix version check on instructions and operands
Also register decorations used with OpDecorateId
* Extension lists can differ between enums that match
Example: SubgroupMaskEq vs SubgroupMaskEqKHR
* Validate scope value for Uniform decoration, for SPIR-V 1.4
* More unioning of exts
* Preserve grammar order within an enum value
* 1.4: Validate OpSelect over composites
* Tools default to 1.4
* Add asm/dis test for OpCopyLogical
* 1.4: asm/dis tests for PtrEqual, PtrNotEqual, PtrDiff
* Basic asm/Dis test for OpCopyMemory
* Test asm/dis OpCopyMemory with 2-memory access
Add asm/dis tests for OpCopyMemorySized
Requires grammar update to add second optional memory access operand
to OpCopyMemory and OpCopyMemorySized
* Validate one or two memory accesses on OpCopyMemory*
* Check av/vis on CopyMemory source and target memory access
This is a proposed rule. See
https://gitlab.khronos.org/spirv/SPIR-V/issues/413
* Validate operation for OpSpecConstantOp
* Validate NonWritable decoration
Also permit NonWritable on members of UBO and SSBO.
* SPIR-V 1.4: NonWrtiable can decorate Function and Private vars
* Update optimizer CLI tests for SPIR-V 1.4
* Testing tools: Give expected SPIR-V version in message
* SPIR-V 1.4 validation for entry point interfaces
* Allow only unique interfaces
* Allow all global variables
* Check that all statically used global variables are listed
* new tests
* Add validation fixture CompileFailure
* Add 1.4 validation for pointer comparisons
* New tests
* Validate with image operands SignExtend, ZeroExtend
Since we don't actually know the image texel format, we can't fully
validate. We need more context.
But we can make sure we allow the new image operands in known-good
cases.
* Validate OpCopyLogical
* Recursively checks subtypes
* new tests
* Add SPIR-V 1.4 tests for NoSignedWrap, NoUnsignedWrap
* Allow scalar conditions in 1.4 with OpSelect
* Allows scalar conditions with vector operands
* new tests
* Validate uniform id scope as an execution scope
* Validate the values of memory and execution scopes are valid scope
values
* new test
* Remove SPIR-V 1.4 Vulkan 1.0 environment
* SPIR-V 1.4 requires Vulkan 1.1
* FIX: include string for spvLog
* FIX: validate nonwritable
* FIX: test case suite for member decorate string
* FIX: test case for hlsl functionality1
* Validation test fixture: ease debugging
* Use binary version for SPIR-V 1.4 specific features
* Switch checks based on the SPIR-V version from the target environment
to instead use the version from the binary
* Moved header parsing into the ValidationState_t constructor (where
version based features are set)
* Added new versions of tests that assemble a 1.3 binary and validate a
1.4 environment
* Fix test for update to SPIR-V 1.4 headers
* Fix formatting
* Ext inst lookup: Add Vulkan 1.1 env with SPIR-V 1.4
* Update spirv-val help
* Operand version checks should use module version
Use the module version instead of the target environment version.
* Fix comment about two-access form of OpCopyMemory
Add functionality to fix-storage-class so that it can fix up mismatched
data types for pointers as well.
Fixes bugs in when fixing up storage class.
Move GenerateCopy to the Pass class to be reused.
The spirv-opt change for #2535.
* Change implementation of post order CFG traversal
It seems like the recursion is going very deep, and causing some problem
is particular situations. I've reimplemented the CFG post order
traversal to not use recursion.
Fixes#2539.
WebGPU requires certain variables to be initialized, whereas there are
known issues with using initializers in Vulkan. This PR is the first
of three implementing a pass to decompose initialized variables into
a variable declaration followed by a store. This has been broken up
into multiple PRs, because there 3 distinct cases that need to be
handled, which require separate implementations.
This first PR implements the basic infrastructure that is needed, and
handling of Function storage class variables. Private and Output will
be handled in future PRs.
This is part of resolving #2388
In WebGPU, the component operand 0xFFFFFFFF is forbidden, but in
Vulkan it is used to indicate a value is undefined. When converting to
WebGPU, 0xFFFFFFFF needs to converted to a legal value, though the
specific one does not matter, since it was used to indicate an
undefined entry in the original code. Choosing to use 0, since the
operands are required to be on [0, N-1], so 0 is guaranteed to always
be valid.
Fixes#2349
Renames the existing flag '--webgpu-mode' to '--vulkan-to-webgpu' for
the Vulkan->WebGPU operation, and adds a new flag '--webgpu-to-vulkan'
for the WebGPU->Vulkan operation.
Currently '--webgpu-to-vulkan' doesn't have any passes associated with
it yet, but further patches will implement them.
Fixes#2495
This pass tries to fix validation error due to a mismatch of storage classes
in instructions. There is no guarantee that all such error will be fixed,
and it is possible that in fixing these errors, it could lead to other
errors.
Fixes#2430.
Fixes#2452
Swaps priority of handling unreachable merge and continues so that the
back-edge is retained in the case a block is both a loop continue and
loop merge
* Check var pointer capability in ADCE.
* Check var ptr capability for common uniform.
* Check var ptr capability in access chain convert.
Since we want this pass to run even if there are variable pointer on
storage buffers, we had to remove asserts that assumed there were no
variable pointers. The functions with the asserts will now work, it
becomes the responsibility of the callers to deal with the output as
appropriate.
* Single block elimination and variable pointers.
It seems like the code in local single block elimination is able to
handle cases with variable pointers already. This is because the
function `HasOnlySupportedRefs` ensures that variables that feed a
variable pointer are not candidates.
* Single store elimination and variable pointers.
It seems like the code in local single stroe elimination is able to
handle cases with variable pointers already. This is because the
function `FindSingleStoreAndCheckUses` ensures that variables that feed
a variable pointer are not candidates.
* SSA rewriter and variable pointers.
It seems like the code in the two passes that call the SSA rewriter are
able to handle cases with variable pointers already. This is because the
function `HasOnlySupportedRefs` ensures that variables that feed
a variable pointer are not candidates.
Fixes#2458.
Fixes#2456
* When eliminating a structured construct that has an unreachable merge,
replace that unreachable terminator with an appropriate return
* New tests
Fixes#2453
* Enable addition of OpPhi instructions when the loop has multiple
predecessors of the merge due to a break
* This can result in some values no longer dominating their uses
* Track return blocks in structured flow to produce OpPhis that have
multiple undef and non-undef arguments
* New tests to catch the bug
* When a block is predicated, mark the new body as a return if the old
block as already a return
If SPV_EXT_descriptor_indexing is enabled, add check that for a
descriptor-based reference, the descriptor is initialized. Initialization
data is stored in the debug input buffer, added to the length information
already there. This feature must be seperately enabled on the pass
creation routine. NOTE: Currently just supports image references; buffer
references are still TODO.
Adds an optimization pass to remove usages of AtomicCounterMemory
bit. This bit is ignored in Vulkan environments and outright forbidden
in WebGPU ones.
Fixes#2242
In constant propagation, decoration are transfered from the original
expression to the constant that will replace it. This can be wrong
because there are no decorations that apply to constants. We choose to
simply delete the decorations.
Fixes#2441
* Handle back edges better in dead branch elim.
Loop header must have exactly one back edge. Sometimes the branch
with the back edge can be folded. However, it should not be folded
if it removes the back edge.
The code to check this simply avoids folding the branch in the
continue block. That needs to be changed to not fold the back edge,
wherever it is.
At the same time, the branch can be folded if it folds to a branch to
the header, because the back edge will still exist.
Fixes#2391.
* Fix OpDot folding of half float vectors.
The code that folds OpDot does not handle half floats correctly. After
trying to multiple the first components, we get a nullptr because we
don't fold half float values. This nullptr gets passed to the code that
does the addition, and causes an assert.
Fixes#2405.
The types of input and output variables must match for the pipeline. We
cannot see the uses in all of the shader, so dead member
elimination cannot safely change the type of input and output variables.
Add a pass that looks for members of structs whose values do not affects
the output of the shader. Those members are then removed and just
treated like padding in the struct.
* Fixes#2338. Added check for phi node before merging blocks.
* Added functionality to merge blocks A and B even when B starts with OpPhi instructions, by replacing uses of the OpPhi results with the definitions coming from A. Added some tests for this.
* Fixed assertion.
* Remove use of deprecated googletest macro
INSTANTIATE_TEST_CASE_P has been deprecated. We need to use
INSTANTIATE_TEST_SUITE_P instead.
* Remove extra commas from test suites.
When looking at the uses of the result of an instruction, code sinking
assumes that all uses are in a basic block. However, this is not true
if there is a decoration or name for the result of that insturction.
This commit checks for this.
Fixes https://crbug.com/923243.
It is legal, but not generated by any SPIR-V producer: an OpCompositeExtract
with no indexes. This is essentially just a copy of the object, so we
treat them that way. We simply propagate the live variables of the
result to the operand.
Fixes https://crbug.com/919181.
It is legal, but not generated by any SPIR-V producer: an OpAccessChain
with no indexes. This is essentially just a copy of the pointer.
I have decided to treat it like an OpCopyObject. In CheckUses, we
return that it is not okay.
When looking at this I realized that we had code in GetUsedComponents
that cannot be reached. If there is a use in an OpCopyObject the it
will not call GetUsedComponents. I removed that dead code.
Fixes https://crbug.com/918311.
During unrolling a new loop is created, but its ownership is not clear
as it gets passed through the code. Changed something to unique_ptr to
make that clearer.
Fixes#2299.
Fixing other memory leaks at the same time.
Fixes#2296Fixes#2297
In C++, a bit shift of the same size as the type is undefined, but it is
defined in spir-v. When folding those cases, we have to be careful. We
cannot simply do the shift in C++.
Fixes https://crbug.com/917697.
Fixes#2138
* Modf and frexp are upgraded to use the struct version of the
instruction and generate an explicit store whose flags can be upgraded
separately
* Fixed major bug where availability and visibility were reversed for
non-copy memory instructions
* Fixed bug where availability and visibility scope operands were reversed for copy memory
* Upgraded all opt tests to use SPV_ENV_UNIVERSAL_1_3
* Upgrade tests moved into unified tests and removed standalone test
* Handle CompositeInsert with no indices in VDCE
In the spec, there it nothing that forces an OpCompositeInsert to have
an index, but VDCE assumes there is at least 1 in a couple places.
This commit updates VDCE to handle these cases.
* Added additional changes for the new AccelerationStructureNV type.
* Added additional changes for the new AccelerationStructureNV type. Change tabs to space...
* Added additional changes for the new accelerationStructureNV type -- add proper type name.
Fix TypeManager.TypeStrings test:
[----------] 29 tests from TypeManager
[ RUN ] TypeManager.TypeStrings
[ OK ] TypeManager.TypeStrings (7 ms)
When we are predicating the continue target for a loop, it can no longer
be the continue target because it will have a branch that exits the loop
and is not the bach edge. The continue target will have to be the
target of that branch that is still in the loop.
Fixes#2211.
The function `UpdatePhiNodes` was being called inconsistently. In one
case, the cfg had already been updated to include the new edge, and in
another place the cfg was not updated. This caused the function to
miss flagging a block as needing new phi nodes. I picked that the cfg
should not be updated before making the call. I documented it, and
change the call sites to match.
Fixes#2207.
We initially assumed that if the type manager returned the correct id
for the pointee type, that we would get the correct pointer type back,
but that is not true. See the unit test added with this commit. We
need to fall back to the linear search any time we are looking for a
pointer to a type that may not be unique.
At the same time, SROA considered an OpName on a variable to be a use of
the entire variable. That has been fixed.
Fixes#2209.
We currently place the load instructions at the start of the basic block
that dominates all of the loads. If that basic block contains OpPhi
instructions, then this will generate invalid code. We just need to
search for a location that comes after all of the OpPhi instructions.
Fixes#2204.
* Don't fold specialized branchs in loop unswitch
Folding branches can have a lot of special cases, and can be a little
error prone. So I only want it in one place. That will be in dead
branch elimination. I will change loop unswitching to set the branches
that were being folded to have a constant condition. Then subsequent
pass of dead branch elimination will be able to remove the code.
At the same time, I added a check that loop unswitching will not
unswitch a branch with a constant condition. It is not useful to do it
because dead branch elimination will simple fold the branch anyway.
Also it avoid an infinite loop that would other wise be introduced by my
first change.
Fixes#2203.
Loop unswitching is unswitching the conditional branch that creates the
back-edge. In the version of the loop, where the bachedge is not taken,
there is no back-edge. This is what causes the validator to complain.
The solution I will go with will be to now unswitch a condition with a
back-edge. At this time we do not now if loop unswitching is used. We do
not include it in the optimization sets provided, nor is it used in
glslang's set. When there are opportunities and no breaks from the loop,
the loop with either be a single iteration loop, or an infinite loop.
There is no performance advantage to performing loop unswitching in
either of those cases. If there is a break, maintaining structured
control flow will be tricky. Unless we see a clear advantage to handling
these case, I would go with the safer simpler solution.
Fixes#2201.
If there are multiple edges to a basic block, then the ssa rewriter will
create OpPhi instructions with duplicate entries. This is invalid, and
it is fixed in this commit.
Fixes#2202.
* Invalidate the decoration manager at the start of ADCE.
If the decoration manager is kept live the the contex will try to keep
it up to date. ADCE deals with group decorations by changing the
operands in |OpGroupDecorate| instructions directly without informing
the decoration manager. This puts it in an invalid state, which will
cause an error when the context tries to update it. To Avoid this
problem, we will invalidate the decoration manager upfront.
At the same time, the decoration manager is now considered when checking
the consistency of the decoration manager.
* Fix invalid OpPhi generated by merge-return.
When we create a new phi node for a value say %10, we have to replace
all of the uses of %10 that are no longer dominated by the def of %10
by the result id of the new phi. However, if the use is in a phi node,
it is possible that the bb contains the use is not dominated by either.
In this case, needs to be handled differently.
* Split loop headers before add a new branch to them.
In merge return, Phi node in loop header that are also merges for loop
do not get updated correctly. Those cases do not fit in with our
current analysis. Doing this will simplify the code by reducing the
number of cases that have to be handled.
Added documentation to the ir context to indicates that TakeNextId()
returns 0 when the max id is reached. TODOs were added to each call
sight so that we know where we have to start to handle this case.
Handle id overflow in |SplitLoopHeader|.
Handle id overflow in |GetOrCreatePreHeaderBlock|.
Handle failure to create preheader in LICM.
Part of https://github.com/KhronosGroup/SPIRV-Tools/issues/1841.
We currently simulate all shift operations when the two operand are
constants. The problem is that if the shift amount is larger than
32, the result is undefined.
I'm changing the folder to return 0 if the shift value is too high.
That way, we will have defined behaviour.
https://crbug.com/910937.
Upgrade to VulkanKHR memory model
* Converts Logical GLSL450 memory model to Logical VulkanKHR
* Adds extension and capability
* Removes deprecated decorations and replaces them with appropriate
flags on downstream instructions
* Support for Workgroup upgrades
* Support for copy memory
* Adding support for image functions
* Adding barrier upgrades and tests
* Use QueueFamilyKHR scope instead of device
* Move ProcessFunction* function from pass to the context.
There are a few functions that are used to traverse the call tree.
They currently live in the Pass class, but they have nothing to do with
a pass, and may be needed outside of a pass. They would be better in
the ir context, or in a specific call tree class if we ever have a need
for it.
* Don't inline recursive functions.
Inlining does not check if a function is recursive or not. This has
been fine as long as the shader was a Vulkan shader, which forbid
recursive functions. However, not all shaders are vulkan, so either
we limit inlining to Vulkan shaders or we teach it to look for recursive
functions.
I prefer to keep the passes as general as is reasonable. The change
does not require much new code in inlining and gives a reason to refactor
some other code.
The changes are to add a member function to the Function class that
checks if that function is recursive or not.
Then this is used in inlining to not inlining a function call if it calls
a recursive function.
* Add id to function analysis
There are a few places that build a map from ids to Function whose
result is that id. I decided to add an analysis to the context for this
to reduce that code, and simplify some of the functions.
* Add missing file.
Fixes#2104
* Checks the rules for logical addressing and variable pointers
* Has an out for relaxed logical pointers
* Updated PassFixture to expose validator options
* enabled relaxed logical pointers for some tests
* New validator tests
These are bookend passes designed to help preserve line information
across passes which delete, move and clone instructions. The propagation
pass attaches a debug line instruction to every instruction based on
SPIR-V line propagation rules. It should be performed before optimization.
The redundant line elimination pass eliminates all line instructions
which match the previous line instruction. This pass should be performed
at the end of optimization to reduce physical SPIR-V file size.
Fixes#2027.
That function currently only handled OpPtrAccessChain if it was in the
middle of the chain, but not at the start. Fixing that up.
Fixes crbug.com/905271.
* Add base and core bindless validation instrumentation classes
* Fix formatting.
* Few more formatting fixes
* Fix build failure
* More build fixes
* Need to call non-const functions in order.
Specifically, these are functions which call TakeNextId(). These need to
be called in a specific order to guarantee that tests which do exact
compares will work across all platforms. c++ pretty much does not
guarantee order of evaluation of operands, so any such functions need to
be called separately in individual statements to guarantee order.
* More ordering.
* And more ordering.
* And more formatting.
* Attempt to fix NDK build
* Another attempt to address NDK build problem.
* One more attempt at NDK build failure
* Add instrument.hpp to BUILD.gn
* Some name improvement in instrument.hpp
* Change all types in instrument.hpp to int.
* Improve documentation in instrument.hpp
* Format fixes
* Comment clean up in instrument.hpp
* imageInst -> image_inst
* Fix GetLabel() issue.
If there is only 1 return and it is in a loop, then the function cannot be inlined.
Fix condition when inlined code needs one-trip loop wrapper. The dummy loop is needed when there is a return inside a selection construct. Even if there is only 1 return.
This CL takes the various opt unit tests and makes a single executable
instead of one per test. This reduces the number of build targets by
~125 when building with ninja.
When looking for a break from a selection construct, we do not realize
that a jump to the continue target of a loop containing the selection
is a break. This causes and infinit loop, or possibly other failures.
Fixes#2004.
When looking for a break from a selection construct, we do not need to
look inside nested constructs. However, if a loop header has an
unconditional branch, then we enter the loop. Entering the loop causes
an infinite loop because we keep going through the loop.
The solution is to look for a merge block, if one exsits, even for block
terminated by an OpBranch.
Fixes#1979.
ADCE liveness algorithm should treat OpUnreachable at least like other
branch instructions. It was being treated as always live which was
preventing useless structured constructs from being eliminated.
OpUnreachable is generated by dead branch elimination which is now
being required by merge return, so this fix should accompany that
change.
We currently run merge-return on all functions, but
dead-branch-elimination only runs on function reachable from an entry
point or exported function. Since dead-branch-elimination is needed for
merge-return, they have to match.
Fixes#1976.
Was removing control structures which didn't have data dependency
with enclosed live loop and otherwise did not contain live code.
An example is a counting loop around a live loop.
Fixes#1967.
Merge return assumes that the only unreachable blocks are those needed
to keep the structured cfg valid. Even those must be essentially empty
blocks.
If this is not the case, we get unpredictable behaviour. This commit
add a check in merge return, and emits an error if it is not the case.
Added a pass of dead branch elimination before merge return in both the
performance and size passes. It is a precondition of merge return.
Fixes#1962.
The current implementation in the folder when seeing a division by zero
is to assert. In the release build, the compiler will attempt to
compute the value, which causes its own problems.
The solution I will go with is to fold the division, and just give it
the value of 0. The same goes for remainder and mod operations.
Fixes#1961.
The HlslCounterBufferGOOGLE that was introduced changed the OpDecorateId
so that is can now reference an id other than the target. If that other
id is used only in the decoration, then the definition of the id will be
removed because decoration do not count as real uses.
However, if the target of the decoration is still live the decoration
will not be removed. This leaves a reference to an id that is not
defined.
There are two solutions to consider. The first is that is the decoration
is kept, then the definition of the id should be kept live. Implementing
this change would be involved because the way ADCE handles decorations
will have to be reimplemented.
The other solution is to remove the decoration the id is otherwise dead.
This works for this specific case. Also this is the more desirable
behaviour in this case. The id will always be the id of a variable that
belongs to a descriptor set. If that variable is not bound and we do
not remove it, the driver will complain.
I chose to implement the second solution. The first will be left to when
a case for it comes up.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1885.
* Check rules from Execution Mode tables, 2.16.2 and the Vulkan
environment spec
* Allows MeshNV execution model with the following execution modes
* LocalSize, LocalSizeId, OutputPoints and OutputVertices
* Done to not break their validation
There are a few spots where copy propagate arrays is trying
to go from a Type to an id, but the type is not unique. When generating
code this pass needs specific ids, otherwise we get type mismatches.
However, the ambigous types means we can sometimes get the wrong type
and generate invalid code.
That code has been rewritten to not rely on the type manager, and just
look at the instructions instead.
I have opened https://github.com/KhronosGroup/SPIRV-Tools/issues/1939 to
try to get a way to make this more robust.
In DecorationManager::RemoveDecorationsFrom, we do not remove the id
from a decoration group if the group has no decorations. This causes
problems because KillNamesAndDecorates is suppose to remove all
references to the id, but in this case, there is still a reference.
This is fixed by adding a special case.
Also, there is the possibility of a double free because
RemoveDecorationsFrom will delete the instructions defining |id| when
|id| is a decoration group. Later, KillInst would later write to memory
that has been deleted when trying to turn it into a Nop. To fix this,
we will only remove the decorations that use |id| and not its definition
in RemoveDecorationsFrom.
It seems like the current implementation of KillNameAndDecorates does
not handle group decorations correctly. The id being removed is not
removed from the OpGroupDecorate instructions. Even worst, any
decorations that apply to that group are removed.
The solution is to use the function in the decoration manager that will
remove the decorations and update the instructions instead of doing the
work itself.
Adds unrolling to the legalization passes.
After enabling unrolling I found a bug when there is a self-referencing
phi node. That has been fixed.
The test that checks for that the order of optimizations is correct also
needed to be updated.
The current implementation of merge return can create bad, but correct,
code. When it is not in a loop construct, it will insert a lot of
extra branch around code. The potentially large number of branches are
bad. At the same time, it can separate code store to variables from
its uses hiding the fact that the store dominates the load.
This hurts the later analysis because the compiler thinks that multiple
values can reach a load, when there is really only 1. This poorer
analysis leads to missed optimizations.
The solution is to create a dummy loop around the entire body of the
function, then we can break from that loop with a single branch. Also
only new merge nodes would be those at the end of loops meaning that
most analysies will not be hurt.
Remove dead code for cases that are no longer possible.
It seems like some drivers expect there the be an OpSelectionMerge
before conditional branches, even if they are not strictly needed.
So we add them.
* Create structed cfg analysis.
There are lots of optimization that have to traverse the CFG in a
structured order just because it wants to know which constructs a
basic block in contained in. This adds extra complexity to these
optimizations, for causes too much refactoring of older optimizations.
To help with this problem, I have written an analysis that can give this
information.
* Identify branches breaking from loops.
Dead branch elimination does a search for a conditional branch to the
end of the current selection construct. This search assumes that the
only way to leave the construct is through the merge node. But that is
not true. The code can jump to the merge node of a loop that contains
the construct.
The search needs to take this into consideration.
In merge blocks, we do not allow the merging of two blocks with merge
instructions. This is because if the two block are merged only 1 of
those instructions can exists. However, if the successor block is the
merge block of the predecessor, then we can delete the merge instruction
in the predecessor. In this case, we are able to merge the blocks.
* Create a new entry point for the optimizer
Creates a new struct to hold the options for the optimizer, and creates
an entry point that take the optimizer options as a parameter.
The old entry point that takes validator options are now deprecated.
The validator options will be one of the optimizer options.
Part of the optimizer options will also be the upper bound on the id bound.
* Add a command line option to set the max value for the id bound. The default is 0x3FFFFF.
* Modify `TakeNextIdBound` to return 0 when the limit is reached.
* Copy decorations when creating new ids.
When creating a new value based on an old value, we need to copy the
decorations to the new id. This change does this in 3 places:
1) The variable holding the return value of the function generated by
merge return should get decorations from the function.
2) The results of the OpPhi instructions should get decorations from the
variable they are replacing in the ssa writer.
3) In local access chain convert the intermediate struct (result of
OpCompositeInsert) generated for the store replacement should get its
decorations from the variable being stored to.
Fixes#1787.
If seems like at least 1 driver does not like a condition jump to the end
of a selection construct. We are generating these in the merge return
pass. This change stops merge return from generating this sequence.
Part of #1861.
When doing predicate blocks, we need to traverse every block in
structured order in order to keep track of which construct a block is
contained in. The standard way of traversing code in structured order
is to create a list with all of the nodes in order. However, when
predicating blocks, new blocks are created, and those blocks are missed.
This causes branches that go too far.
The solution is to update the order as new blocks are created. Since
we are using an std::list, we do not have to worry about invalidation of
iterators when changing the list.
* Refactor PredicateBlocks
Refactor PredicateBlocks so that we know which constructs a return
is contained in. Will be used later.
* Have PredicateBlocks jump the existing merge blocks.
In PredicateBlocks, we currently skip instructions with side effects,
but it still follows the same control flow (sort-of). This causes a
problem, when we are trying to predicate code in a loop. We skip all
of the code with side effects (IV increment), but still follow the
same control flow (jump back the start of the loop). This creates an
infinite loop because the code will keep jumping back to the start of
the loop without changing the values that effect the exit condition.
This is a large change to merge-return. When predicating a block that
is in a loop or merge construct, it will jump to the merge block of the
construct. Once out of all constructs we will generate code as we did
before.
* Handle breaks from structured-ifs in DCE.
dead code elimination assumes that are conditional branches except for
breaks and continues in loops will have an OpSelectionMerge before them.
That is not true when breaking out of a selection construct.
The fix is to look for breaks in selection constructs in the same place
we look for breaks and continues for loops.
When dead-branch-elim folds a conditional branch, it also deletes the
OpSelectionMerge instruction. If that construct contains a
conditional branch to the merge node, it will not have its own
OpSelectionMerge. When the headers merge instruction is deleted, the
the inner conditional branch will no longer be legal. It will be a
selection to a node that is not a merge node.
We fix this up by moving the OpSelectionMerge to a new location if it is
still needed.
In local-access-chain-convert, we replace loads by load the entire
variable, then doing the extract. The extract will have the same value
as the load. However, if the load has a decoration on it, the
decoration is lost because we do not copy any them to the new id.
This is fixed by rewritting the load into the extract and keeping the
same result id.
This change has the effect that we do not call DCEInst on the loads
because the load is not being deleted, but replaced. This could leave
OpAccessChain instructions around that are not used. This is not a
problem for -O and -Os. They run local_single_*_elim passes and then
dead code elimination. The dce will remove the unused access chains,
and the load elimination passes work even if there are unused access
chains. I have added test to them to ensure they will not loss
opportunities.
Fixes#1787.
The code in source/message was only used in a single set of tests to
format the output results. This CL changes the test to verify the
message instead of all the error values and removes the source/message
code.
* Run the validator in the optimization fuzzers.
The optimizers assumes that the input to the optimizer is valid. Since
the fuzzers do not check that the input is valid before passing the
spir-v to the optimizer, we are getting a few errors.
The solution is to run the validator in the optimizer to validate the
input.
For the legalization passes, we need to add an extra option to the
validator to accept certain types of variable pointers, even if the
capability is not given. At the same time, we changed the option
"--legalize-hlsl" to relax the validator in the same way instead of
turning it off.
