Fixes#1618.
Adds a check that validates acceptable exits from case constructs. Case
constructs may only exit to another case construct, the corresponding
merge, an outer loop continue or outer loop merge.
Fixes#1664 : PushConstant with Block follows storage buffer rules
PushConstant variables were being checked with block rules, which are
too strict.
Fixes#1606 : StorageBuffer with Block layout follows buffer rules
StorageBuffer variables were not being checked before.
Fix layout messages: say storage class and decoration
We need to provide more information about storage class and decoration.
The folding routines are currently global functions. They also rely on
data in an std::map that holds the folding rules for each opcode. This
causes that map to not have a clear owner, and therefore never gets
deleted.
There has been a request to delete this map. To implement this, we will
create a InstructionFolder class that owns the maps. The IRContext will
own the InstructionFolder instance. Then the global functions will
become public memeber functions of the InstructionFolder.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1659.
There are a few locations where we need to handle duplicate types. We
cannot merge them because they may be needed for reflection. When this
happens we need do some extra lookups in the type manager.
The specific fixes are:
1) When generating a constant through `GetDefiningInstruction` accept
and use an id for the desired type of the constant. This will make sure
you get the type that is needed.
2) In Private-to-local, make sure we to update the def-use chains when a
new pointer type is created.
3) In the type manager, make sure that `FindPointerToType` returns a
pointer that points to the given type and not a duplicate type.
4) In scalar replacment, make sure the null constants that are created
are the correct type.
Many optimization will run on function scope symbols only. When symbols
are moved from private scope to function scople, then these optimizations
can do more.
I believe it is a good idea to run this pass with both -O and -Os. To
get the most out of it it should be run ASAP after inlining and something
that remove all of the dead functions.
- Add asm/dis test for SPV_KHR_8bit_storage
- validator: SPV_KHR_8bit_storage capabilities enable declaration of 8bit int
TODO:
- validator: ban arithmetic on 8bit unless Int8 is enabled
Covered by https://github.com/KhronosGroup/SPIRV-Tools/issues/1595
Produce better error diagnostics in the CFG validation.
This CL fixes up several issues with the diagnostic error line output
in the CFG validation code. For the cases where we can determine a
better line it has been output. For other cases, we removed the
diagnostic line and the error line number from the results.
Fixes#1657
Revert "Don't merge types of resources"
This reverts commit f393b0e480, but leaves
the tests that were added. Added new test. These test are the so that,
if someone tries the same change I made, they will see the test that
they need to handle.
Don't run remove duplicates in -O and -Os
Romve duplicates was run to help reduce compile time when looking for
types in the type manager. I've run compile time test on three sets
of shaders, and the compile time does not seem to change.
It should be safe to remove it.
The Compact IDs pass can corrupt the CFG, but first the CFG has to
be setup. To do this, a test that builds the CFG, then performs the
compact IDs pass, then checks context consistency.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1648
During the compact IDs optimization pass, the result IDs of some
basic blocks can change. In spite of this, GetPreservedAnalyses
indicated that the CFG was preserved. But the CFG relies on
the basic blocks having the same IDs. Simply removing this flag
resolves the issue by preventing the CFG check.
Also Removes combinators and namemap preserved analyses from
compact IDs pass.
subprocess.Popen returns byte data by default. Python2 was happy
to try to execute string operations on such data and hope for the
best, but python3 is more persnickety. Luckily, there's a simple
way to indicate to the Popen class that text data is wanted that
benefits the script. Just specifying universal_newlines will cause
the returned data to be text and also convert any system-specific
newlines to '\n' which the script relies on anyway.
Enabled on Mac as an incidental change after confirming that the
script works there just as well as it does on Linux.
It probably works on FreeBSD too, but I retired my BSD system years
ago. So I have no way to check.
Don't run it on Windows.
- It didn't work after all. It was just detecting non-posix and
returning success.
When doing reflection users care about the names of the variable, the
name of the type, and the name of the members. Remove duplicates breaks
this because it removes the names one of the types when merging.
To fix this we have to keep the different types around for each
resource. This commit adds code to remove duplicates to look for the
types uses to describe resources, and make sure they do not get merged.
However, allow merging of a type used in a resource with something not
used in a resource. Was done when the non resource type came second.
This could have a negative effect on compile time, but it was not
expected to be much.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1372.
Fixes#937
Stop std140/430 validation when runtime array is encountered.
Check for standard uniform/storage buffer layout instead of std140/430.
Added validator command line switch to skip block layout checking.
Validate structs decorated as Block/BufferBlock only when they
are used as variable with storage class of uniform or push
constant.
Expose --relax-block-layout to command line.
dneto0 modification:
- Use integer arithmetic instead of floor.
We need this to reduce the test time on Visual Studio debug builds.
AppVeyor times out at 300s for a process.
Artificially lower the local variable limit check for testing purposes.
We don't get much value from using the full 500K+ variables.
Use a limit of 5000 instead.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1632
This CL adds the necessary files to use gclient and the depot_tools with
the SPIRV-Tools directory. This allows doing things like `git cl format`
to format code pre-upload and `git cl presubmit -uf` to run presubmit
checks over the code.
The dependencies are all added to the DEPS file and will be
auto-downloaded. They are all pin'd to specific revisions so everyone
has the same checkout. Clang is included in the checkout so it will be
consistent over usages.
Use clang-format
Add SPV_ENV_WEBGPU_0 for work-in-progress WebGPU.
val: Disallow OpUndef in WebGPU env
Silence unused variable warnings when !defined(SPIRV_EFFCE)
Limit visibility of validate_instruction.cpp's symbols
Only InstructionPass needs to be visible so all other functions are put
in an anonymous namespace inside the libspirv namespace.
Also add a corresponding check for capabilities in the validator.
Update previously existing test cases where an instruction used to fail
assembling because of a version check, but now they succeed because the
instruction is also guarded by a capability. Now it should assemble.
Add tests to ensure that capabilities are checked appropriately.
The explicitly reserved instructions OpImageSparseSampleProj*
now assemble, but they fail validation.
Fixes#1624
[val] Add extra context to error messages.
This CL extends the error messages produced by the validator to output the
disassembly of the errored line.
The validation_id messages have also been updated to print the line number of
the error instead of the word number. Note, the error number is from the start
of the SPIR-V, it does not include any headers printed in the disassembled code.
Fixes#670, #1581
This CL reverts the revert of 'Disallow array-of-arrays with DescriptorSets when
validating." Other changes have been committed which should aleviate the
AppVeryor resource constraints.
This reverts commit f2c93c6e12.
This CL adds validation to disallow using an array-of-arrays when attached to a
DescriptorSet.
Fixes#1522
This CL reverts the revert of 'Disallow array-of-arrays with DescriptorSets when
validating." Other changes have been committed which should aleviate the
AppVeryor resource constraints.
This reverts commit f2c93c6e12.
This CL adds validation to disallow using an array-of-arrays when attached to a
DescriptorSet.
Fixes#1522
Validate Ids before DataRules.
The DataRule validators call FindDefs with the assumption that they
definitions being looked at can be found. This may not be true if we
have not validated identifiers first.
This CL flips the IdPass and DataRulesPass to fix this issue.
Fixes#491
* Basic blocks now have a link to the terminator
* Check all case sepecific rules
* Missing check for branching into the middle of a case (#1618)
Fixes#1120
Checks that all static uses of the Input and Output variables are listed
as interfaces in each corresponding entry point declaration.
* Changed validation state to track interface lists
* updated many tests
* Modified validation state to store entry point names
* Combined with interface list and called EntryPointDescription
* Updated uses
* Changed interface validation error messages to output entry point name
in addtion to ID
We replace the std::vector in the Operand class by a new class that does
a small size optimization. This helps improve compile time on Windows.
Tested on three sets of shaders. Trying various values for the small
vector. The optimal value for the operand class was 2. However, for
the Instruction class, using an std::vector was optimal. Size of "0"
means that an std::vector was used.
Instruction size
0 4 8
Operand Size
0 489 544 684
1 593 487
2 469 570
4 473
8 505
This is a single thread run of ~120 shaders. For the multithreaded run
the results were the similar. The basline time was ~62sec. The
optimal configuration was an 2 for the OperandData and an
std::vector for the OperandList with a compile time of ~38sec. Similar
expiriments were done with other sets of shaders. The compile time still
improved, but not as much.
Contributes to https://github.com/KhronosGroup/SPIRV-Tools/issues/1609.
Try to reduce the amount of disk space used by especially by debug builds,
which may be contributing to AppVeyor failures.
Collapses tests in categories:
- validator
- loop optimizations
- dominator analysis
- linker
Contributes to #1615
- Fix tests for basic group operations (e.g. Reduce) to allow for
new capabilities in SPIR-V 1.3 that enable them.
- Refactor operand capability check to avoid code duplication and
to put all checks that don't need table lookup before any table
lookup.
- Test round trip assembly/disassembly support for extension
SPV_NV_viewport_array2
- Test assembly and validation of decoration ViewportRelativeNV
Fixes#1596
Fixes#1281
* New structured cfg check: all non-construct header blocks'
predecessors must come from within the construct
* New function to calculate blocks in a construct
* Fixed a bug in BasicBlock type bitset
Relaxing check to not consider unreachable predecessors
* Fixing broken common uniform elim test
This CL updates the validate_id code to output the name of the object along with
the id number. There were a few instances which already output the name, this
just extends to all of them. Now, the output should say 123[obj] instead of just
123.
Issue #1581
* Disallow array-of-arrays with DescriptorSets when validating.
This CL adds validation to disallow using an array-of-arrays when attached to a
DescriptorSet.
Fixes#1522
The following passes are updated to preserve the inst-to-block and
def-use analysies:
private-to-local
aggressive dead-code elimination
dead branch elimination
local-single-block elimination
local-single-store elimination
reduce load size
compact ids (inst-to-block only)
merge block
dead-insert elimination
ccp
The one execption is that compact ids still kills the def-use manager.
This is because it changes so many ids it is faster to kill and rebuild.
Does everything in
https://github.com/KhronosGroup/SPIRV-Tools/issues/1593 except for the
changes to merge return.
By using forward pointers, we are able to define a struct that has a
pointer to itself. This could be directly or indirectly. The current
implementation of the type manager did not handle this case. There are
three changes that are made in this commit inorder to handle this case:
1) Change the handling of OpTypeForwardPointer
The current handling of OpTypeForwardsPointer is broken if there is a
reference to the pointer before the real definition. When build the
type that contain the forward delared pointer, the type manager will ask
for the type for that ID, and will get a nullptr because it does not
exists. This nullptr is not handleded very well.
The change is to keep track of the incomplete types the first time
through all of the types. An incomplete type is a ForwardPointer or any
type that references an incomplete type.
Then we implement a second pass through the incomplete types that will
complete them.
2) Hashing types.
When hashing a type, we want to uses all of the subtypes as part of the
hash. However, with types that reference them selves, this creates an
infinite recursion. To get around this, we keep track of which types
have been seen on the path from the root type. If we have see the
current type already then we can stop the recursion.
3) Comparing types.
In order to check if two types are the same, we must check that all of
their subtypes are the same as well. This also causes an infinit
recursion. The solution is to stop comparing the subtypes if we are
trying to compare two pointer types that we are already in the middle of
comparing. The ideas is that if the two pointer are different, then in
progress compare will return false itself.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1578.
We add a new rule to the folding rules to fold an FMix feeding an
extract when the alpha value for the element being extracted is either
0 or 1. In those case, we can simple extract from one of the operands
to the FMix.
With that change the simplification pass completely subsumes the
insert-extract elimination pass. So we remove the insert-extract
elimination passes and replce them with calls to the simplification
pass.
In a follow up PR, we should delete the insert-extract elimination pass.
Contributes to https://github.com/KhronosGroup/SPIRV-Tools/issues/1570.
