* linker: run dedup earlier
Otherwise `linkings_to_do` might end up with stale IDs.
* linker: allow linking functions with different pointer arguments
Since llvm-17 there are no typed pointers and hte SPIRV-LLVM-Translator
doesn't know the function signature of imported functions.
I'm investigating different ways of solving this problem and adding an
option to work around it inside `spirv-link` is one of those.
The code is almost complete, just I'm having troubles constructing the
bitcast to cast the pointer parameters to the final type.
Closes: https://github.com/KhronosGroup/SPIRV-LLVM-Translator/issues/2153
* test/linker: add tests to test the AllowPtrTypeMismatch feature
Currently spirv-link fails if all input files don't use the same
SPIR-V version. Add an option to instead use the highest input
version as the output version. Note that if one of the 'old'
input files uses an opcode that is deprecated in the 'new'
version, the output spirv will be invalid.
* linker: Recalculate interface variables
By resolving extern symbols Entry Points might access variables they
hadn't declared before.
* test/linker: add test to verify linked spir-vs importing functions validate
Without the fix Validate will complain about:
"ERROR: 9: Interface variable id <5> is used by entry point 'bar' id <1>, but is not listed as an interface\n %5 = OpVariable %_ptr_Input_v3uint Input\n"
* linker: Address conversion error introduced in earlier rework
Also rework the code slightly to first compute the new ID bound and
validate it, and only then, offset all existing IDs.
This makes those two steps clearer, and avoids potentially overflowing
the IDs within a module (even if that would have been caught later on).
Fixes: c3849565 ("Linker improvements (#4679)")
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/4684
* test/linker: Disable IdsLimit tests for now
They are taking too long to run and results in the CI jobs timing out.
* test/linker: Code factorisation and small tweaks
* linker: Do not fail when going over limits
The limits are minima and implementations or APIs might support higher
limits, so just warn the user about it. And only check for the limits
right before emitting the binary, as limits might change earlier when
removing duplicate instructions, function prototypes, etc.
The only check performed right before merging, is making sure the ID
bound will not overflow the 32 bits following the merge.
Also, use the defines for the limits instead of hard-coding them.
* linker: Require a memory model in each input module
The existing code could run into weird situation. For example, if the
first module had no memory model, it would not emit any memory model
(sort of reasonable) and would accept without complains all possible mix
from later modules as it would not verify them.
* linker: Replace hex version with SPV_SPIRV_VERSION_WORD
* linker: Error out when linking together different versions
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/4135
* tools/linker: Do not write to disk if linking failed
Also, do not consider warnings as errors.
* tools/linker: Fix formatting in help message
* tools/linker: Further clarify the use of --target-env
Also update the text for the default version to reflect the change made
in 7d768812 ("Basic support for SPIR-V 1.6 (#4663)").
* Fix endianness of string literals
To get correct and consistent encoding and decoding of string literals
on big-endian platforms, use spvtools::utils::MakeString and MakeVector
(or wrapper functions) consistently for handling string literals.
- add variant of MakeVector that encodes a string literal into an
existing vector of words
- add variants of MakeString
- add a wrapper spvDecodeLiteralStringOperand in source/
- fix wrapper Operand::AsString to use MakeString (source/opt)
- remove Operand::AsCString as broken and unused
- add a variant of GetOperandAs for string literals (source/val)
... and apply those wrappers throughout the code.
Fixes #149
* Extend round trip test for StringLiterals to flip word order
In the encoding/decoding roundtrip tests for string literals, include
a case that flips byte order in words after encoding and then checks for
successful decoding. That is, on a little-endian host flip to big-endian
byte order and then decode, and vice versa.
* BinaryParseTest.InstructionWithStringOperand: also flip byte order
Test binary parsing of string operands both with the host's and with the
reversed byte order.
The generator ID is located in the upper 16 bits. The lower bits are
reserved for a version number.
Co-authored-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
* tools/linker: Error out on unrecognized options
Fixes#4083.
* tools/linker: Use early returns when parsing options
This was already the case for some linker options, and other tools were
doing so for all of their options.
* tools/linker: Rework the usage output
* The new formatting for long options taking a value makes it explicit
that there is no equal sign between the option name and the value.
* The options are sorted by lexicographical order.
* Change the option formatting from 90 columns to 80, to match the other
tools.
* tools/linker: Change the default environment to spv1.5
* tools/linker: Change the default output to spv.out
Instead of writing to the standard output when the "-o" option is not
specified, the resulting linked SPIR-V binary will be written to
"spv.out".
One can still have the output sent to the standard output by specifying
"-o -".
* tools/linker: Update the reported target for --version
Running `spirv-link --version` will now report the currently selected
environment.
* tools/linker: Sort header includes
* linker: Improve module-related error messages
* Use 1-based indexing of modules;
* Say which module could not be built;
* Use the correct total number of input modules in the error message
when one fails to build.
If enabled the following targets will be created:
* `${SPIRV_TOOLS}-static` - `STATIC` library. Has full public symbol visibility.
* `${SPIRV_TOOLS}-shared` - `SHARED` library. Has default-hidden symbol visibility.
* `${SPIRV_TOOLS}` - will alias to one of above, based on BUILD_SHARED_LIBS.
If disabled the following targets will be created:
* `${SPIRV_TOOLS}` - either `STATIC` or `SHARED` based on the new `SPIRV_TOOLS_LIBRARY_TYPE` flag. Has full public symbol visibility.
* `${SPIRV_TOOLS}-shared` - `SHARED` library. Has default-hidden symbol visibility.
Defaults to `ON`, matching existing build behavior.
This flag can be used by package maintainers to ensure that all libraries are built as shared objects.
Rename the `${SPIRV_TOOLS}` target to `${SPIRV_TOOLS}-static` and alias `${SPIRV_TOOLS}` to either `${SPIRV_TOOLS}-static` or `${SPIRV_TOOLS}-shared` depending on `BUILD_SHARED_LIBS`.
Re-point all internal uses of `${SPIRV_TOOLS}` to `${SPIRV_TOOLS}-static`.
`${SPIRV_TOOLS}-static` is explicitly renamed to just `${SPIRV_TOOLS}` to ensure the name does not change from current behavior.
Build the `SPIRV-Tools-*` libraries as static, as this is what they always were.
Force the external targets `gmock` and `effcee` to be built statically. These either do not support being built as shared libraries, or require special flags.
Issue: #3482
* Allow OpExtInst for DebugInfo between secion 9 and 10
Fixes#3086
* Handle spirv-opt errors on DebugInfo Ext
* Add IR Loader test
* Fix ir loader bug
* Handle DebugFunction/DebugTypeMember forward reference
* Add test cases (forward reference to function)
* Support old DebugInfo extension
* Validate local debug info out of function
Added exports for libraries. External libraries that themselves use
libraries require all dependencies have exports, so not having exports can
cause major problems when used within other projects.
Install paths for exports are now placed in the proper directories expected
by Windows and *nix systems. Config files are generated as well, which
should work with CMake's find_package() function once installed.
* Types: Avoid comparing IDs for in Type::IsSameImpl
When linking, we end up with duplicate types for imported and exported
types, that needs to be removed. The current code would reject valid
import/export pairs of symbols due to IDs mismatch, even if the types or
constants behind those ID were the same.
Enabled remaining type_match_test
Fixes#2442
The function class provides a {Set|Get}Parent call in order to provide
the context to the LoopDescriptor methods. This CL removes the module
from Function and provides the needed context directly to LoopDescriptor
on creation.
Most of the link code is marked as static. This CL introduces an anonymous namespace
and removes the static methods. The last two methods are exposed in the public API and
have been left in the spvtools namespace.
This CL moves the files in opt/ to consistenly be under the opt::
namespace. This frees up the ir:: namespace so it can be used to make a
shared ir represenation.
[val] Add extra context to error messages.
This CL extends the error messages produced by the validator to output the
disassembly of the errored line.
The validation_id messages have also been updated to print the line number of
the error instead of the word number. Note, the error number is from the start
of the SPIR-V, it does not include any headers printed in the disassembled code.
Fixes#670, #1581
Turn `Linker::Link()` into free functions
As very little information was kept in the Linker class, we can get rid
of the whole class and have the `Link()` as free functions instead; the
environment target as well as the consumer are passed along through an
`spv_context` object.
The resulting linked_binary is passed as a pointer rather than a
reference to follow the Google C++ Style guidelines.
Addresses remaining comments from
https://github.com/KhronosGroup/SPIRV-Tools/pull/693 about the SPIR-V
linker.
Fix variable naming in the linker
Some of the variables were using mixed case, which did not follow the
Google C++ Style guidelines.
Linker: Use EXPECT_EQ when possible and update some test
* Replace occurrences of ASSERT_EQ by EXPECT_EQ when possible;
* Reformulated some of the error messages;
* Added the symbol name in the error message when there is a type or
decoration mismatch between the imported and exported declarations.
Opt: List all duplicates removed by RemoveDuplicatePass in the header
Opt: Make the const version of GetLabelInst() return a pointer
For consistency with the non-const version, as well as other similar
functions.
Opt: Rename function_end to EndInst()
As pointed out by dneto0 the previous name was quite confusing and could
be mistaken with a function returning an end iterator.
Also change the return type of the const version to a pointer rather
than a reference, for consistency.
Opt: Add performance comment to RemoveDuplicateTypes and decorations
This comment was requested during the review of
https://github.com/KhronosGroup/SPIRV-Tools/pull/693.
Opt: Add comments and fix variable naming in RemoveDuplicatePass
* Add missing comments to private functions;
* Rename variables that were using mixed case;
* Add TODO for moving AreTypesEqual out.
Linker: Remove commented out code and add TODOs
Linker: Merged together strings that were too much splitted
Implement a C++ RAII wrapper around spv_context
Calling `ToNop` leaves around instructions that are pointless. In
general it is better to remove the instruction completely. That way
other optimizations will not need to look at them.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1003.
In order to keep track of all of the implicit capabilities as well as
the explicit ones, we will add them all to the feature manager. That is
the object that needs to be queried when checking if a capability is
enabled.
The name of the "HasCapability" function in the module was changed to
make it more obvious that it does not check for implied capabilities.
Keep an spv_context and AssemblyGrammar in IRContext
* changed the way duplicate types are removed to stop copying
instructions
* Reworked RemoveDuplicatesPass::AreTypesSame to use type manager and
type equality
* Reworked TypeManager memory management to store a pool of unique
pointers of types
* removed unique pointers from id map
* fixed instances where free'd memory could be accessed
The current method of removing an instruction is to call ToNop. The
problem with this is that it leaves around an instruction that later
passes will look at. We should just delete the instruction.
In MemPass there is a utility routine called DCEInst. It can delete
essentially any instruction, which can invalidate pointers now that they
are actually deleted. The interface was changed to add a call back that
can be used to update any local data structures that contain
ir::Intruction*.
Re-formatted the source tree with the command:
$ /usr/bin/clang-format -style=file -i \
$(find include source tools test utils -name '*.cpp' -or -name '*.h')
This required a fix to source/val/decoration.h. It was not including
spirv.h, which broke builds when the #include headers were re-ordered by
clang-format.
Replaced representation of uses
* Changed uses from unordered_map<uint32_t, UseList> to
set<pairInstruction*, Instruction*>>
* Replaced GetUses with ForEachUser and ForEachUse functions
* updated passes to use new functions
* partially updated tests
* lots of cleanup still todo
Adding an unique id to Instruction generated by IRContext
Each instruction is given an unique id that can be used for ordering
purposes. The ids are generated via the IRContext.
Major changes:
* Instructions now contain a uint32_t for unique id and a cached context
pointer
* Most constructors have been modified to take a context as input
* unfortunately I cannot remove the default and copy constructors, but
developers should avoid these
* Added accessors to parents of basic block and function
* Removed the copy constructors for BasicBlock and Function and replaced
them with Clone functions
* Reworked BuildModule to return an IRContext owning the built module
* Since all instructions require a context, the context now becomes the
basic unit for IR
* Added a constructor to context to create an owned module internally
* Replaced uses of Instruction's copy constructor with Clone whereever I
found them
* Reworked the linker functionality to perform clones into a different
context instead of moves
* Updated many tests to be consistent with the above changes
* Still need to add new tests to cover added functionality
* Added comparison operators to Instruction
Adding tests for Instruction, IRContext and IR loading
Fixed some header comments for BuildModule
Fixes to get tests passing again
* Reordered two linker steps to avoid use/def problems
* Fixed def/use manager uses in merge return pass
* Added early return for GetAnnotations
* Changed uses of Instruction::ToNop in passes to IRContext::KillInst
Simplifying the uses for some contexts in passes
Each instruction is given an unique id that can be used for ordering
purposes. The ids are generated via the IRContext.
Major changes:
* Instructions now contain a uint32_t for unique id and a cached context
pointer
* Most constructors have been modified to take a context as input
* unfortunately I cannot remove the default and copy constructors, but
developers should avoid these
* Added accessors to parents of basic block and function
* Removed the copy constructors for BasicBlock and Function and replaced
them with Clone functions
* Reworked BuildModule to return an IRContext owning the built module
* Since all instructions require a context, the context now becomes the
basic unit for IR
* Added a constructor to context to create an owned module internally
* Replaced uses of Instruction's copy constructor with Clone whereever I
found them
* Reworked the linker functionality to perform clones into a different
context instead of moves
* Updated many tests to be consistent with the above changes
* Still need to add new tests to cover added functionality
* Added comparison operators to Instruction
* Added an internal option to LinkerOptions to verify merged ids are
unique
* Added a test for the linker to verify merged ids are unique
* Updated MergeReturnPass to supply a context
* Updated DecorationManager to supply a context for cloned decorations
* Reworked several portions of the def use tests in anticipation of next
set of changes
To make the decoration manger available everywhere, and to reduce the
number of times it needs to be build, I add one the IRContext.
As the same time, I move code that modifies decoration instruction into
the IRContext from mempass and the decoration manager. This will make
it easier to keep everything up to date.
This should take care of issue #928.
NFC. This just makes sure every file is formatted following the
formatting definition in .clang-format.
Re-formatted with:
$ clang-format -i $(find source tools include -name '*.cpp')
$ clang-format -i $(find source tools include -name '*.h')
This change will move the instances of the def-use manager to the
IRContext. This allows it to persists across optimization, and does
not have to be rebuilt multiple times.
Added test to ensure that the IRContext is validating and invalidating
the analyses correctly.
This is the first part of adding the IRContext. This class is meant to
hold the extra data that is build on top of the module that it
owns.
The first part will simply create the IRContext class and get it passed
to the passes in place of the module. For now it does not have any
functionality of its own, but it acts more as a wrapper for the module.
The functions that I added to the IRContext are those that either
traverse the headers or add to them. I did this because we may decide
to have other ways of dealing with these sections (for example adding a
type pool, or use the decoration manager).
I also added the function that add to the header because the IRContext
needs to know when an instruction is added to update other data
structures appropriately.
Note that there is still lots of work that needs to be done. There are
still many places that change the module, and do not inform the context.
That will be the next step.
Add extra iterators for ir::Module's sections
Add extra getters to ir::Function
Add a const version of BasicBlock::GetLabelInst()
Use the max of all inputs' version as version
Split debug in debug1 and debug2
- Debug1 instructions have to be placed before debug2 instructions.
Error out if different addressing or memory models are found
Exit early if no binaries were given
Error out if entry points are redeclared
Implement copy ctors for Function and BasicBlock
- Visual Studio ends up generating copy constructors that call deleted
functions while compiling the linker code, while GCC and clang do not.
So explicitly write those functions to avoid Visual Studio messing up.
Move removing duplicate capabilities to its own pass
Add functions running on all IDs present in an instruction
Remove duplicate SpvOpExtInstImport
Give default options value for link functions
Remove linkage capability if not making a library
Check types before allowing to link
Detect if two types/variables/functions have different decorations
Remove decorations of imported variables/functions and their types
Add a DecorationManager
Add a method for removing all decorations of id
Add methods for removing operands from instructions
Error out if one of the modules has a non-zero schema
Update README.md to talk about the linker
Do not freak out if an imported built-in variable has no export
