* Check rules from Execution Mode tables, 2.16.2 and the Vulkan
environment spec
* Allows MeshNV execution model with the following execution modes
* LocalSize, LocalSizeId, OutputPoints and OutputVertices
* Done to not break their validation
OpPhi instruction must appear before all non-OpPhi instructions
except for OpLine. Without this commit, Validator does not check
the case that an OpPhi is preceeded by an OpLine and the OpLine is
preceeded by a non-OpPhi instruction that is not OpLine.
Checked all instructions whose object is OpTypeSampledImage or
OpTypeImage as suggested in #487. OpImageTexelPointer instruction
is missing and others look good. This commit adds only
OpImageTexelPointer.
* Validate all type ids.
The validator does not check if the type of an instruction is actually
a type unless the OpCode has a specific requirement. For example,
OpFAdd is checked, but OpUndef is not.
The commit add a generic check that if there is a type id then the id
defines a type.
http://crbug.com/876694
* Merge other checks for type into new one.
There are a couple check that the type id is a type for specific
opcodes. Those have been mereged into 1.
Small changes to other test cases to make them valid enough for the
purpose of the test.
In the specification of `OpTypeFunction`, it says
> OpFunction is the only valid use of OpTypeFunction.
This commit add a check in the validator for this rule.
A test started to fail because the new check happens before the check
the test case is testing. Updated the test case to still fail the
check it was suppose to fail originally.
http://crbug.com/874571
* Split constant opcode validation out of idUsage and into
validate_constants.cpp
* minor style fixes
* reduced duplication
* fixed an issue with array sizing
When doing the validator checks, an instruction is currently registered
at the end of IdPass. This creates an inconsistency. In IdPass, an
instruction that uses its own result will treat that use as a forward
reference. Then in the following passes it will not because the
definition can be found.
It seems best to update the state after all of the check have been done
for the current instruction. This makes it consistent for all of the
passes.
This makes a different when trying to verify OpTypeStruct.
Fixes https://crbug.com/874372.
* Moved function opcode validation out of idUsage and into new files
* minor style changes
* General opcode checking is in validate_function.cpp
* Execution limitation checking is in
validate_execution_limitations.cpp
* Execution limitations was split into a new pass as it requires other
validation to register those limitations first.
* Changed entry point validation to check storage class of variable
instead of pointer
* added a test
* Moved several checks after opcode validation
* These checks should be able to guarantee individual instructions are
ok
* Updated tests due to reordered checks
* Moved type instruction validation out of validation idUsage into a new
file
* Consolidate type unique pass into new file
* Removed one bad test
* Reworked validation ordering
Fixes#1800
* Refactored duplication of code between OpCopyMemory and
OpCopyMemorySized validation
* Fixed some bugs in OpCopyMemorySized validation
* Replaced asserts with checks
* Added new tests
* Replaced uses in opcode validation of current_function()
* Added non-const accessor to function lookup in ValidationState_t
* Updated a couple bad tests due to check reordering
When validating a FunctionCall we can trigger an assert if we are not
currently within a function body. This CL adds verification that we are
within a function before attempting to add a function call.
Issue 1789.
Many of the files have using std::<foo> statements in them, but then the
use of <foo> will be inconsistently std::<foo> or <foo> scattered
through the file. This CL removes all of the using statements and
updates the code to have the required std:: prefix.
This CL removes the two diag() overloads and leaves only the version
which accepts an Instruction. This is safer as we never use the
implicit location from the validation state.
This CL updates the diag() calls in validate_cfg to provide the
associated instruction. This fixes a couple places where we output the
last line of the file instead of the instruction as the disassembly.
This CL changes validate.cpp to use diag providing an explicit
instruction. This changes the result of the function end checks to not
output a disassembly anymore as printing the last line of the module
didn't seem to make sense.
Currently, some instructions will be missing from the list of
ordered_instructions. This will cause issues due to the debug change
which passed the last instruction into subsequent passes.
This CL moves the addition to the ordered list out of the
RegisterInstruction method into AddOrderedInstruction. This method is
called first in ProcessInstruction and the CapabilitiesPass and IdPass
are updated to take an Instruction parameter.
This CL removes the redundant operator name from the error messages in
validate_composites. The operator will be printed on the next line with
the disassembly.
This CL splits the switch in ImagePass into individual validate
functions. The error messages have been updated to drop the
suffix/prefix of the opcode name since it will be displayed in the
disassembly.
This CL updates the code to pull a valid instruction for the line number
when outputting a component error in OpVectorShuffle. The error line
isn't the best at this point as it points at the component, but it's
better then a -1 (turning to max<size_t>) that was being output.
The error messages has been updated to better reflect what the error is
attempting to say.
Issue 1719.
- Vulkan 1.0 uses strict layout rules
- Vulkan 1.0 with relaxed-block-layout validator option
enforces all rules except for the relaxation of vector
offset.
- Vulkan 1.1 and later always supports relaxed block layout
Add spot check tests for the relaxed-block-layout scenarios.
Fixes#1697
This CL moves the various validate files into the val/ directory with
the rest of the validation infrastructure. This matches how opt/ is
setup with the passes with the infrastructure.
Other environments do not.
Add tests for OpenGL 4.5 and SPIR-V universal 1.0 to ensure
they still check monotonic layout.
For universal 1.0, we're assuming it otherwise follows Vulkan
rules for block layout.
Fixes#1685
This CL moves the validation code to the val:: namespace. This makes it
clearer which instance of the Instruction and other classes are being
referred too.
Implement rules for row-major matrices
Use ArrayStride and MatrixStride to compute sizes
Propagate matrix stride and RowMajor/ColumnMajor through array members of structs.
Fixes#1637Fixes#1668
Fixes#1618.
Adds a check that validates acceptable exits from case constructs. Case
constructs may only exit to another case construct, the corresponding
merge, an outer loop continue or outer loop merge.
Fixes#1664 : PushConstant with Block follows storage buffer rules
PushConstant variables were being checked with block rules, which are
too strict.
Fixes#1606 : StorageBuffer with Block layout follows buffer rules
StorageBuffer variables were not being checked before.
Fix layout messages: say storage class and decoration
We need to provide more information about storage class and decoration.
- Add asm/dis test for SPV_KHR_8bit_storage
- validator: SPV_KHR_8bit_storage capabilities enable declaration of 8bit int
TODO:
- validator: ban arithmetic on 8bit unless Int8 is enabled
Covered by https://github.com/KhronosGroup/SPIRV-Tools/issues/1595
Produce better error diagnostics in the CFG validation.
This CL fixes up several issues with the diagnostic error line output
in the CFG validation code. For the cases where we can determine a
better line it has been output. For other cases, we removed the
diagnostic line and the error line number from the results.
Fixes#1657
Fixes#937
Stop std140/430 validation when runtime array is encountered.
Check for standard uniform/storage buffer layout instead of std140/430.
Added validator command line switch to skip block layout checking.
Validate structs decorated as Block/BufferBlock only when they
are used as variable with storage class of uniform or push
constant.
Expose --relax-block-layout to command line.
dneto0 modification:
- Use integer arithmetic instead of floor.
We need this to reduce the test time on Visual Studio debug builds.
AppVeyor times out at 300s for a process.
Artificially lower the local variable limit check for testing purposes.
We don't get much value from using the full 500K+ variables.
Use a limit of 5000 instead.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1632
Add SPV_ENV_WEBGPU_0 for work-in-progress WebGPU.
val: Disallow OpUndef in WebGPU env
Silence unused variable warnings when !defined(SPIRV_EFFCE)
Limit visibility of validate_instruction.cpp's symbols
Only InstructionPass needs to be visible so all other functions are put
in an anonymous namespace inside the libspirv namespace.
Also add a corresponding check for capabilities in the validator.
Update previously existing test cases where an instruction used to fail
assembling because of a version check, but now they succeed because the
instruction is also guarded by a capability. Now it should assemble.
Add tests to ensure that capabilities are checked appropriately.
The explicitly reserved instructions OpImageSparseSampleProj*
now assemble, but they fail validation.
Fixes#1624
[val] Add extra context to error messages.
This CL extends the error messages produced by the validator to output the
disassembly of the errored line.
The validation_id messages have also been updated to print the line number of
the error instead of the word number. Note, the error number is from the start
of the SPIR-V, it does not include any headers printed in the disassembled code.
Fixes#670, #1581
This CL reverts the revert of 'Disallow array-of-arrays with DescriptorSets when
validating." Other changes have been committed which should aleviate the
AppVeryor resource constraints.
This reverts commit f2c93c6e12.
This CL adds validation to disallow using an array-of-arrays when attached to a
DescriptorSet.
Fixes#1522
Validate Ids before DataRules.
The DataRule validators call FindDefs with the assumption that they
definitions being looked at can be found. This may not be true if we
have not validated identifiers first.
This CL flips the IdPass and DataRulesPass to fix this issue.
Fixes#491
* Basic blocks now have a link to the terminator
* Check all case sepecific rules
* Missing check for branching into the middle of a case (#1618)
Fixes#1120
Checks that all static uses of the Input and Output variables are listed
as interfaces in each corresponding entry point declaration.
* Changed validation state to track interface lists
* updated many tests
* Modified validation state to store entry point names
* Combined with interface list and called EntryPointDescription
* Updated uses
* Changed interface validation error messages to output entry point name
in addtion to ID
Try to reduce the amount of disk space used by especially by debug builds,
which may be contributing to AppVeyor failures.
Collapses tests in categories:
- validator
- loop optimizations
- dominator analysis
- linker
Contributes to #1615
- Fix tests for basic group operations (e.g. Reduce) to allow for
new capabilities in SPIR-V 1.3 that enable them.
- Refactor operand capability check to avoid code duplication and
to put all checks that don't need table lookup before any table
lookup.
- Test round trip assembly/disassembly support for extension
SPV_NV_viewport_array2
- Test assembly and validation of decoration ViewportRelativeNV
Fixes#1596
Fixes#1281
* New structured cfg check: all non-construct header blocks'
predecessors must come from within the construct
* New function to calculate blocks in a construct
* Fixed a bug in BasicBlock type bitset
Relaxing check to not consider unreachable predecessors
* Fixing broken common uniform elim test
This CL updates the validate_id code to output the name of the object along with
the id number. There were a few instances which already output the name, this
just extends to all of them. Now, the output should say 123[obj] instead of just
123.
Issue #1581
* Disallow array-of-arrays with DescriptorSets when validating.
This CL adds validation to disallow using an array-of-arrays when attached to a
DescriptorSet.
Fixes#1522
According to the SPIR-V Spec, section 2.4 Logical Layout of a Module there
should be a single required OpMemoryModel instruction provided. This CL adds
validation that OpMemoryModel is provided to the SPIR-V validator.
Fixes#1207
SPV_EXT_shader_viewport_index_layer enables using ViewportIndex
and Layer in vertex and tessellation shaders.
Also, as per the Vulkan spec:
> The ViewportIndex decoration must be used only within vertex,
> tessellation evaluation, geometry, and fragment shaders.
> In a vertex, tessellation evaluation, or geometry shader, any
> variable decorated with ViewportIndex must be declared using
> the Output storage class.
> In a fragment shader, any variable decorated with ViewportIndex
> must be declared using the Input storage class.
Similarly for Layer.
* Adds new pass for validating non-uniform group instructions
* Currently on checks execution scope for Vulkan 1.1 and SPIR-V 1.3
* Added test framework
* Reworked how execution model limitations are checked
* Now OpFunction checks which entry points call it and checks its
registered limitations instead of building a call stack in the entry
point
* New tests
* Moving function to entry point mapping into VState
Relaxs checks for per-vertex builtin variables. If the builtin
decoration is applied to a variable, then those checks now allow a level
of arraying on the variable before checking the type consistency.
* Allows arrays of variables to be present for the per-vertex variables:
* Position
* PointSize
* ClipDistance
* CullDistance
* Updated tests
Add test for case where OpBranch branches to a value (a function value).
Previous tests only checked a label value (name of a block.).
Update validate_id.cpp to remove the TODO for OpBranch and say that it
is already checked in validate_cfg.cpp
According to Vulkan spec 1.1.72:
> The PrimitiveId decoration must be used only within fragment,
> tessellation control, tessellation evaluation, and geometry shaders.
> In a tessellation control or tessellation evaluation shader, any
> variable decorated with PrimitiveId must be declared using the Input
> storage class.
We were enforcing that PrimitiveId can only be used with Output
storage class for TCS and TES before.
Update grammar table generation:
- Get extensions from instructions, not just operand-kinds
- Don't explicitly list extensions that come from the SPIR-V core
grammar or from a KHR extended instruction set grammar.
This makes it easier to support new extensions since the recommended
extension strategy is to add instructions to the core grammar file.
Also, test the validator has trivial support for passing through
the extensions SPV_NV_shader_subgroup_partitioned and
SPV_EXT_descriptor_indexing.
Migrating to unified grammar means we sometimes have two fields
for a certain feature: version and extensions. It means the feature
in question can be used either in SPIR-V of advanced-enough
versions or in any SPIR-V with with the specified extensions.
Validator now respects the above rules.
At every definition of a builtin id, run at-reference-check rules on the
defining instruction as well.
Previosly the validation was missing the case when invalid storage class
was defined in the instruction which defines the built-in, and not in
the instruction which references the built-in.
Refactored validate built-ins to make
GetExecutionModels(entry_point)
and
GetExecutionModes(entry_point)
available in validation state.
Entry points are allowed to have multiple execution modes and execution
models.
Finished the last missing feature in Vulkan built-ins validation:
FragDepth requires DepthReplacing.
Fixes https://github.com/KhronosGroup/SPIRV-Tools/issues/1427
Adjusting validation to the new rule:
"Before version 1.3, it is only valid to use this instruction with
TessellationControl, GLCompute, or Kernel execution models.
There is no such restriction starting with version 1.3."
Also fixed wrong version numbers in source/spirv_target_env.cpp.
Added a framework for validation of BuiltIn variables. The framework
allows implementation of flexible abstract rules which are required for
built-ins as the information (decoration, definition, reference) is not
in one place, but is scattered all over the module.
Validation rules are implemented as a map
id -> list<functor(instrution)>
Ids which are dependent on built-in types or objects receive a task
list, such as "this id cannot be referenced from function which is
called from entry point with execution model X; propagate this rule
to your descendants in the global scope".
Also refactored test/val/val_fixtures.
All built-ins covered by tests
Previously we keep a separate static grammar table for opcodes/
operands per SPIR-V version. This commit changes that to use a
single unified static grammar table for opcodes/operands.
This essentially changes how grammar facts are queried against
a certain target environment. There are only limited filtering
according to the desired target environment; a symbol is
considered as available as long as:
1. The target environment satisfies the minimal requirement of
the symbol; or
2. There is at least one extension enabling this symbol.
Note that the second rule assumes the extension enabling the
symbol is indeed requested in the SPIR-V code; checking that
should be the validator's work.
Also fixed a few grammar related issues:
* Rounding mode capability requirements are moved to client APIs.
* Reserved symbols not available in any extension is no longer
recognized by assembler.
