glibc/sysdeps/powerpc/preconfigure

# preconfigure fragment for powerpc.

case "$machine" in
powerpc64le)
  base_machine=powerpc machine=powerpc/powerpc64le
  ;;
powerpc64*)
  base_machine=powerpc machine=powerpc/powerpc64
  ;;
powerpc*)
  # Check for e500.
  $CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null > conftest.i
  if grep -q __NO_FPRS__ conftest.i && ! grep -q _SOFT_FLOAT conftest.i; then
    base_machine=powerpc machine=powerpc/powerpc32/e500
  else
    base_machine=powerpc machine=powerpc/powerpc32
  fi
  rm -f conftest.i
  with_fp_cond="!defined __NO_FPRS__"
  ;;
esac
Move base_machine and machine settings from configure.ac to sysdeps preconfigure fragments. This patch makes non-ex-ports architectures set base_machine and machine based on the original configured machine value in preconfigure fragments, like ex-ports architectures, rather than in the toplevel configure.ac. Tested x86 that the disassembly of installed shared libraries is unchanged by the patch. * configure.ac (base_machine): Do not set specially for particular machines here. * configure: Regenerated. * sysdeps/powerpc/preconfigure: Move machine and base_machine settings from configure.ac. * sysdeps/i386/preconfigure: New file. * sysdeps/s390/preconfigure: Likewise. * sysdeps/sh/preconfigure: Likewise. * sysdeps/sparc/preconfigure: Likewise. 2014-06-25 17:52:56 +00:00			`# preconfigure fragment for powerpc.`
Add e500 port. 2013-10-18 21:03:40 +00:00
			`case "$machine" in`
powerpc64le: Create divergent sysdep directory for powerpc64le. float128 on powerpc64le requires the addition of the ieee754/float128 sysdep, whereas powerpc64 doesn't. This requires creating a bunch of submachine and cpu directories and Implies files which just point towards their powerpc64 equivalent. Tested on P7, P8, and generic powerpc64le targets with and without multiarch. * sysdeps/powerpc/powerpc64le/Implies: New file. * sysdeps/powerpc/powerpc64le/fpu/Implies: New file. * sysdeps/powerpc/powerpc64le/fpu/multiarch/Implies: New file. * sysdeps/powerpc/powerpc64le/multiarch/Implies: New file. * sysdeps/powerpc/powerpc64le/power7/Implies: New file. * sysdeps/powerpc/powerpc64le/power7/fpu/Implies: New file. * sysdeps/powerpc/powerpc64le/power7/fpu/multiarch/Implies: New file. * sysdeps/powerpc/powerpc64le/power7/multiarch/Implies: New file. * sysdeps/powerpc/powerpc64le/power8/Implies: New file. * sysdeps/powerpc/powerpc64le/power8/fpu/Implies: New file. * sysdeps/powerpc/powerpc64le/power8/fpu/multiarch/Implies: New file. * sysdeps/powerpc/powerpc64le/power8/multiarch/Implies: New file. * sysdeps/powerpc/powerpc64le/power9/Implies: New file. * sysdeps/powerpc/powerpc64le/power9/fpu/Implies: New file. * sysdeps/powerpc/powerpc64le/power9/fpu/multiarch/Implies: New file. * sysdeps/powerpc/powerpc64le/power9/multiarch/Implies: New file. * sysdeps/powerpc/preconfigure: New file. * sysdeps/unix/sysv/linux/powerpc/powerpc64le/Implies: New file. * sysdeps/unix/sysv/linux/powerpc/powerpc64le/fpu/Implies: New file. 2016-07-15 23:04:40 +00:00			`powerpc64le)`
			`base_machine=powerpc machine=powerpc/powerpc64le`
			`;;`
Move base_machine and machine settings from configure.ac to sysdeps preconfigure fragments. This patch makes non-ex-ports architectures set base_machine and machine based on the original configured machine value in preconfigure fragments, like ex-ports architectures, rather than in the toplevel configure.ac. Tested x86 that the disassembly of installed shared libraries is unchanged by the patch. * configure.ac (base_machine): Do not set specially for particular machines here. * configure: Regenerated. * sysdeps/powerpc/preconfigure: Move machine and base_machine settings from configure.ac. * sysdeps/i386/preconfigure: New file. * sysdeps/s390/preconfigure: Likewise. * sysdeps/sh/preconfigure: Likewise. * sysdeps/sparc/preconfigure: Likewise. 2014-06-25 17:52:56 +00:00			`powerpc64*)`
			`base_machine=powerpc machine=powerpc/powerpc64`
			`;;`
			`powerpc*)`
			`# Check for e500.`
Add e500 port. 2013-10-18 21:03:40 +00:00			`$CC $CFLAGS $CPPFLAGS -E -dM -xc /dev/null > conftest.i`
			`if grep -q __NO_FPRS__ conftest.i && ! grep -q _SOFT_FLOAT conftest.i; then`
			`base_machine=powerpc machine=powerpc/powerpc32/e500`
Move base_machine and machine settings from configure.ac to sysdeps preconfigure fragments. This patch makes non-ex-ports architectures set base_machine and machine based on the original configured machine value in preconfigure fragments, like ex-ports architectures, rather than in the toplevel configure.ac. Tested x86 that the disassembly of installed shared libraries is unchanged by the patch. * configure.ac (base_machine): Do not set specially for particular machines here. * configure: Regenerated. * sysdeps/powerpc/preconfigure: Move machine and base_machine settings from configure.ac. * sysdeps/i386/preconfigure: New file. * sysdeps/s390/preconfigure: Likewise. * sysdeps/sh/preconfigure: Likewise. * sysdeps/sparc/preconfigure: Likewise. 2014-06-25 17:52:56 +00:00			`else`
			`base_machine=powerpc machine=powerpc/powerpc32`
Add e500 port. 2013-10-18 21:03:40 +00:00			`fi`
			`rm -f conftest.i`
Remove --with-fp / --without-fp. There is a configure option --without-fp that specifies that nofpu sysdeps directories should be used instead of fpu directories. For most glibc configurations, this option is of no use: either there is no valid nofpu variant of that configuration, or there are no fpu or nofpu sysdeps directories for that processor and so the option does nothing. For a few configurations, if you are using a soft-float compiler this option is required, and failing to use it generally results in compilation errors from inline asm using unavailable floating-point instructions. We're moving away from --with-cpu to configuring glibc based on how the compiler generates code, and it is natural to do so for --without-fp as well; in most cases the soft-float and hard-float ABIs are incompatible so you have no hope of building a working glibc with an inappropriately configured compiler or libgcc. This patch eliminates --without-fp, replacing it entirely by automatic configuration based on the compiler. Configurations for which this is relevant (coldfire / mips / powerpc32 / sh) define a variable with_fp_cond in their preconfigure fragments (under the same conditions under which those fragments do anything); this is a preprocessor conditional which the toplevel configure script then uses in a test to determine which sysdeps directories to use. The config.make with-fp variable remains. It's used only by powerpc (sysdeps/powerpc/powerpc32/Makefile) to add -mhard-float to various flags variables. For powerpc, -mcpu= options can imply use of soft-float. That could be an issue if you want to build for e.g. 476fp, but are using --with-cpu=476 because there isn't a 476fp sysdeps directory. If in future we eliminate --with-cpu and replace it entirely by testing the compiler, it would be natural at that point to eliminate that code as well (as the user should then just use a compiler defaulting to 476fp and the 476 sysdeps directory would be used automatically). Tested for x86_64, and tested with build-many-glibcs.py that installed shared libraries are unchanged by this patch. * configure.ac (--with-fp): Remove configure option. (with_fp_cond): New variable. (libc_cv_with_fp): New configure test. Use this variable instead of with_fp. * configure: Regenerated. * config.make.in (with-fp): Use @libc_cv_with_fp@. * manual/install.texi (Configuring and compiling): Remove --without-fp. * INSTALL: Regenerated. * sysdeps/m68k/preconfigure (with_fp_cond): Define for ColdFire. * sysdeps/mips/preconfigure (with_fp_cond): Define. * sysdeps/powerpc/preconfigure (with_fp_cond): Define for 32-bit. * sysdeps/sh/preconfigure (with_fp_cond): Define. * scripts/build-many-glibcs.py (Context.add_all_configs): Do not use --without-fp to configure glibc. 2017-12-12 13:56:47 +00:00			`with_fp_cond="!defined __NO_FPRS__"`
Add e500 port. 2013-10-18 21:03:40 +00:00			`;;`
			`esac`