This is the only missing part in struct statvfs.
The LSB calls [f]statfs() deprecated, and its weird types are definitely
off-putting. However, its use is required to get f_type.
Instead, allocate one of the six spares to f_type,
copied directly from struct statfs.
This then becomes a small glibc extension to the standard interface
on Linux and the Hurd, instead of two different interfaces, one of which
is quite odd due to being an ABI type, and there no longer is any reason
to use statfs().
The underlying kernel type is a mess, but all architectures agree on u32
(or more) for the ABI, and all filesystem magicks are 32-bit integers.
We don't lose any generality by using u32, and by doing so we both make
the API consistent with the Hurd, and allow C++
switch(f_type) { case RAMFS_MAGIC: ...; }
Also fix tst-statvfs so that it actually fails;
as it stood, all it did was return 0 always.
Test statfs()' and statvfs()' f_types are the same.
Link: https://lore.kernel.org/linux-man/f54kudgblgk643u32tb6at4cd3kkzha6hslahv24szs4raroaz@ogivjbfdaqtb/t/#u
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
We mentioned eventual dropping of libcrypt in the 2.28 NEWS. Actually
put that plan in motion by first disabling building libcrypt by default.
note in NEWS that the library will be dropped completely in a future
release.
Also add a couple of builds into build-many-glibcs.py.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Add --enable-fortify-source option.
It is now possible to enable fortification through a configure option.
The level may be given as parameter, if none is provided, the configure
script will determine what is the highest level possible that can be set
considering GCC built-ins availability and set it.
If level is explicitly set to 3, configure checks if the compiler
supports the built-in function necessary for it or raise an error if it
isn't.
If the configure option isn't explicitly enabled, it _FORTIFY_SOURCE is
forcibly undefined (and therefore disabled).
The result of the configure checks are new variables, ${fortify_source}
and ${no_fortify_source} that can be used to appropriately populate
CFLAGS.
A dedicated patch will follow to make use of this variable in Makefiles
when necessary.
Updated NEWS and INSTALL.
Adding dedicated x86_64 variant that enables the configuration.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
ISO C2x defines scanf %b for input of binary integers (with an
optional 0b or 0B prefix). Implement such support, along with the
corresponding SCNb* macros in <inttypes.h>. Unlike the support for
binary integers with 0b or 0B prefix with scanf %i, this is supported
in all versions of scanf (independent of the standards mode used for
compilation), because there are no backwards compatibility concerns
(%b wasn't previously a supported format) the way there were for %i.
Tested for x86_64 and x86.
ISO C2x defines printf length modifiers wN (for intN_t / int_leastN_t
/ uintN_t / uint_leastN_t) and wfN (for int_fastN_t / uint_fastN_t).
Add support for those length modifiers (such a feature was previously
requested in bug 24466). scanf support is to be added separately.
GCC 13 has format checking support for these modifiers.
When used with the support for registering format specifiers, these
modifiers are translated to existing flags in struct printf_info,
rather than trying to add some way of distinguishing them without
breaking the printf_info ABI. C2x requires an error to be returned
for unsupported values of N; this is implemented for printf-family
functions, but the parse_printf_format interface doesn't support error
returns, so such an error gets discarded by that function.
Tested for x86_64 and x86.
These functions are about to be added to POSIX, under Austin Group
issue 986.
The fortified strlcat implementation does not raise SIGABRT if the
destination buffer does not contain a null terminator, it just
inherits the non-failing regular strlcat behavior.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This patch enables libmvec on AArch64. The proposed change is mainly
implementing build infrastructure to add the new routines to ABI,
tests and benchmarks. I have demonstrated how this all fits together
by adding implementations for vector cos, in both single and double
precision, targeting both Advanced SIMD and SVE.
The implementations of the routines themselves are just loops over the
scalar routine from libm for now, as we are more concerned with
getting the plumbing right at this point. We plan to contribute vector
routines from the Arm Optimized Routines repo that are compliant with
requirements described in the libmvec wiki.
Building libmvec requires minimum GCC 10 for SVE ACLE. To avoid raising
the minimum GCC by such a big jump, we allow users to disable libmvec
if their compiler is too old.
Note that at this point users have to manually call the vector math
functions. This seems to be acceptable to some downstream users.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Created tunable glibc.pthread.stack_hugetlb to control when hugepages
can be used for stack allocation.
In case THP are enabled and glibc.pthread.stack_hugetlb is set to
0, glibc will madvise the kernel not to use allow hugepages for stack
allocations.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
And make always supported. The configure option was added on glibc 2.25
and some features require it (such as hwcap mask, huge pages support, and
lock elisition tuning). It also simplifies the build permutations.
Changes from v1:
* Remove glibc.rtld.dynamic_sort changes, it is orthogonal and needs
more discussion.
* Cleanup more code.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
It is the default since 2.26 and it has bitrotten over the years,
By using it multiple malloc tests fails:
FAIL: malloc/tst-memalign-2
FAIL: malloc/tst-memalign-2-malloc-hugetlb1
FAIL: malloc/tst-memalign-2-malloc-hugetlb2
FAIL: malloc/tst-memalign-2-mcheck
FAIL: malloc/tst-mxfast-malloc-hugetlb1
FAIL: malloc/tst-mxfast-malloc-hugetlb2
FAIL: malloc/tst-tcfree2
FAIL: malloc/tst-tcfree2-malloc-hugetlb1
FAIL: malloc/tst-tcfree2-malloc-hugetlb2
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
WG14 recently accepted two additions to the printf/scanf %b/%B
support: there are now PRIb* and SCNb* macros in <inttypes.h>, and
printf %B is now an optional feature defined in normative text,
instead of recommended practice, with corresponding PRIB* macros that
can also be used to test whether that optional feature is supported.
See N3072 items 14 and 15 for details (those changes were accepted,
some other changes in that paper weren't).
Add the corresponding PRI* macros to glibc and update one place in the
manual referring to %B as recommended. (SCNb* should naturally be
added at the same time as the corresponding scanf %b support.)
Tested for x86_64 and x86.
C2x adds binary integer constants starting with 0b or 0B, and supports
those constants for the %i scanf format (in addition to the %b format,
which isn't yet implemented for scanf in glibc). Implement that scanf
support for glibc.
As with the strtol support, this is incompatible with previous C
standard versions, in that such an input string starting with 0b or 0B
was previously required to be parsed as 0 (with the rest of the input
potentially matching subsequent parts of the scanf format string).
Thus this patch adds 12 new __isoc23_* functions per long double
format (12, 24 or 36 depending on how many long double formats the
glibc configuration supports), with appropriate header redirection
support (generally very closely following that for the __isoc99_*
scanf functions - note that __GLIBC_USE (DEPRECATED_SCANF) takes
precedence over __GLIBC_USE (C2X_STRTOL), so the case of GNU
extensions to C89 continues to get old-style GNU %a and does not get
this new feature). The function names would remain as __isoc23_* even
if C2x ends up published in 2024 rather than 2023.
When scanf %b support is added, I think it will be appropriate for all
versions of scanf to follow C2x rules for inputs to the %b format
(given that there are no compatibility concerns for a new format).
Tested for x86_64 (full glibc testsuite). The first version was also
tested for powerpc (32-bit) and powerpc64le (stdio-common/ and wcsmbs/
tests), and with build-many-glibcs.py.
The Linux kernel upstream commit 71bdea6f798b ("parisc: Align parisc
MADV_XXX constants with all other architectures") dropped the
parisc-specific MADV_* values in favour of the same constants as
other architectures. In the same commit a wrapper was added which
translates the old values to the standard MADV_* values to avoid
breakage of existing programs.
This upstream patch has been downported to all stable kernel trees as
well.
This patch now drops the parisc specific constants from glibc to
allow newly compliled programs to use the standard MADV_* constants.
v2: Added NEWS section, based on feedback from Florian Weimer
Signed-off-by: Helge Deller <deller@gmx.de>
C2x adds binary integer constants starting with 0b or 0B, and supports
those constants in strtol-family functions when the base passed is 0
or 2. Implement that strtol support for glibc.
As discussed at
<https://sourceware.org/pipermail/libc-alpha/2020-December/120414.html>,
this is incompatible with previous C standard versions, in that such
an input string starting with 0b or 0B was previously required to be
parsed as 0 (with the rest of the string unprocessed). Thus, as
proposed there, this patch adds 20 new __isoc23_* functions with
appropriate header redirection support. This patch does *not* do
anything about scanf %i (which will need 12 new functions per long
double variant, so 12, 24 or 36 depending on the glibc configuration),
instead leaving that for a future patch. The function names would
remain as __isoc23_* even if C2x ends up published in 2024 rather than
2023.
Making this change leads to the question of what should happen to
internal uses of these functions in glibc and its tests. The header
redirection (which applies for _GNU_SOURCE or any other feature test
macros enabling C2x features) has the effect of redirecting internal
uses but without those uses then ending up at a hidden alias (see the
comment in include/stdio.h about interaction with libc_hidden_proto).
It seems desirable for the default for internal uses to be the same
versions used by normal code using _GNU_SOURCE, so rather than doing
anything to disable that redirection, similar macro definitions to
those in include/stdio.h are added to the include/ headers for the new
functions.
Given that the default for uses in glibc is for the redirections to
apply, the next question is whether the C2x semantics are correct for
all those uses. Uses with the base fixed to 10, 16 or any other value
other than 0 or 2 can be ignored. I think this leaves the following
internal uses to consider (an important consideration for review of
this patch will be both whether this list is complete and whether my
conclusions on all entries in it are correct):
benchtests/bench-malloc-simple.c
benchtests/bench-string.h
elf/sotruss-lib.c
math/libm-test-support.c
nptl/perf.c
nscd/nscd_conf.c
nss/nss_files/files-parse.c
posix/tst-fnmatch.c
posix/wordexp.c
resolv/inet_addr.c
rt/tst-mqueue7.c
soft-fp/testit.c
stdlib/fmtmsg.c
support/support_test_main.c
support/test-container.c
sysdeps/pthread/tst-mutex10.c
I think all of these places are OK with the new semantics, except for
resolv/inet_addr.c, where the POSIX semantics of inet_addr do not
allow for binary constants; thus, I changed that file (to use
__strtoul_internal, whose semantics are unchanged) and added a test
for this case. In the case of posix/wordexp.c I think accepting
binary constants is OK since POSIX explicitly allows additional forms
of shell arithmetic expressions, and in stdlib/fmtmsg.c SEV_LEVEL is
not in POSIX so again I think accepting binary constants is OK.
Functions such as __strtol_internal, which are only exported for
compatibility with old binaries from when those were used in inline
functions in headers, have unchanged semantics; the __*_l_internal
versions (purely internal to libc and not exported) have a new
argument to specify whether to accept binary constants.
As well as for the standard functions, the header redirection also
applies to the *_l versions (GNU extensions), and to legacy functions
such as strtoq, to avoid confusing inconsistency (the *q functions
redirect to __isoc23_*ll rather than needing their own __isoc23_*
entry points). For the functions that are only declared with
_GNU_SOURCE, this means the old versions are no longer available for
normal user programs at all. An internal __GLIBC_USE_C2X_STRTOL macro
is used to control the redirections in the headers, and cases in glibc
that wish to avoid the redirections - the function implementations
themselves and the tests of the old versions of the GNU functions -
then undefine and redefine that macro to allow the old versions to be
accessed. (There would of course be greater complexity should we wish
to make any of the old versions into compat symbols / avoid them being
defined at all for new glibc ABIs.)
strtol_l.c has some similarity to strtol.c in gnulib, but has already
diverged some way (and isn't listed at all at
https://sourceware.org/glibc/wiki/SharedSourceFiles unlike strtoll.c
and strtoul.c); I haven't made any attempts at gnulib compatibility in
the changes to that file.
I note incidentally that inttypes.h and wchar.h are missing the
__nonnull present on declarations of this family of functions in
stdlib.h; I didn't make any changes in that regard for the new
declarations added.
Add a NEWS entry noting the removal of the legacy hwcaps search
mechanism for shared objects.
Signed-off-by: Javier Pello <devel@otheo.eu>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The ahosts, ahostsv4, ahostsv6 commands unconditionally pass
AI_ADDRCONFIG to getaddrinfo, which is not always desired.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This reverts commit 6f85dbf102.
Once this change hits the release branches, it will require relinking
of all statically linked applications before static dlopen works
again, for the majority of updates on release branches: The NEWS file
is regularly updated with bug references, so the __libc_early_init
suffix changes, and static dlopen cannot find the function anymore.
While this ABI check is still technically correct (we do require
rebuilding & relinking after glibc updates to keep static dlopen
working), it is too drastic for stable release branches.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The files NEWS, include/link.h, and sysdeps/generic/ldsodefs.h
contribute to the version fingerprint used for detection. The
fingerprint can be further refined using the --with-extra-version-id
configure argument.
_dl_call_libc_early_init is replaced with _dl_lookup_libc_early_init.
The new function is used store a pointer to libc.so's
__libc_early_init function in the libc_map_early_init member of the
ld.so namespace structure. This function pointer can then be called
directly, so the separate invocation function is no longer needed.
The versioned symbol lookup needs the symbol versioning data
structures, so the initialization of libc_map and libc_map_early_init
is now done from _dl_check_map_versions, after this information
becomes available. (_dl_map_object_from_fd does not set this up
in time, so the initialization code had to be moved from there.)
This means that the separate initialization code can be removed from
dl_main because _dl_check_map_versions covers all maps, including
the initial executable loaded by the kernel. The lookup still happens
before relocation and the invocation of IFUNC resolvers, so IFUNC
resolvers are protected from ABI mismatch.
The __libc_early_init function pointer is not protected because
so little code runs between the pointer write and the invocation
(only dynamic linker code and IFUNC resolvers).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Rather than buffering 16 MiB of entropy in userspace (by way of
chacha20), simply call getrandom() every time.
This approach is doubtlessly slower, for now, but trying to prematurely
optimize arc4random appears to be leading toward all sorts of nasty
properties and gotchas. Instead, this patch takes a much more
conservative approach. The interface is added as a basic loop wrapper
around getrandom(), and then later, the kernel and libc together can
work together on optimizing that.
This prevents numerous issues in which userspace is unaware of when it
really must throw away its buffer, since we avoid buffering all
together. Future improvements may include userspace learning more from
the kernel about when to do that, which might make these sorts of
chacha20-based optimizations more possible. The current heuristic of 16
MiB is meaningless garbage that doesn't correspond to anything the
kernel might know about. So for now, let's just do something
conservative that we know is correct and won't lead to cryptographic
issues for users of this function.
This patch might be considered along the lines of, "optimization is the
root of all evil," in that the much more complex implementation it
replaces moves too fast without considering security implications,
whereas the incremental approach done here is a much safer way of going
about things. Once this lands, we can take our time in optimizing this
properly using new interplay between the kernel and userspace.
getrandom(0) is used, since that's the one that ensures the bytes
returned are cryptographically secure. But on systems without it, we
fallback to using /dev/urandom. This is unfortunate because it means
opening a file descriptor, but there's not much of a choice. Secondly,
as part of the fallback, in order to get more or less the same
properties of getrandom(0), we poll on /dev/random, and if the poll
succeeds at least once, then we assume the RNG is initialized. This is a
rough approximation, as the ancient "non-blocking pool" initialized
after the "blocking pool", not before, and it may not port back to all
ancient kernels, though it does to all kernels supported by glibc
(≥3.2), so generally it's the best approximation we can do.
The motivation for including arc4random, in the first place, is to have
source-level compatibility with existing code. That means this patch
doesn't attempt to litigate the interface itself. It does, however,
choose a conservative approach for implementing it.
Cc: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Cristian Rodríguez <crrodriguez@opensuse.org>
Cc: Paul Eggert <eggert@cs.ucla.edu>
Cc: Mark Harris <mark.hsj@gmail.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The implementation is based on scalar Chacha20 with per-thread cache.
It uses getrandom or /dev/urandom as fallback to get the initial entropy,
and reseeds the internal state on every 16MB of consumed buffer.
To improve performance and lower memory consumption the per-thread cache
is allocated lazily on first arc4random functions call, and if the
memory allocation fails getentropy or /dev/urandom is used as fallback.
The cache is also cleared on thread exit iff it was initialized (so if
arc4random is not called it is not touched).
Although it is lock-free, arc4random is still not async-signal-safe
(the per thread state is not updated atomically).
The ChaCha20 implementation is based on RFC8439 [1], omitting the final
XOR of the keystream with the plaintext because the plaintext is a
stream of zeros. This strategy is similar to what OpenBSD arc4random
does.
The arc4random_uniform is based on previous work by Florian Weimer,
where the algorithm is based on Jérémie Lumbroso paper Optimal Discrete
Uniform Generation from Coin Flips, and Applications (2013) [2], who
credits Donald E. Knuth and Andrew C. Yao, The complexity of nonuniform
random number generation (1976), for solving the general case.
The main advantage of this method is the that the unit of randomness is not
the uniform random variable (uint32_t), but a random bit. It optimizes the
internal buffer sampling by initially consuming a 32-bit random variable
and then sampling byte per byte. Depending of the upper bound requested,
it might lead to better CPU utilization.
Checked on x86_64-linux-gnu, aarch64-linux, and powerpc64le-linux-gnu.
Co-authored-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
[1] https://datatracker.ietf.org/doc/html/rfc8439
[2] https://arxiv.org/pdf/1304.1916.pdf
This change provides implementations for the mbrtoc8 and c8rtomb
functions adopted for C++20 via WG21 P0482R6 and for C2X via WG14
N2653. It also provides the char8_t typedef from WG14 N2653.
The mbrtoc8 and c8rtomb functions are declared in uchar.h in C2X
mode or when the _GNU_SOURCE macro or C++20 __cpp_char8_t feature
test macro is defined.
The char8_t typedef is declared in uchar.h in C2X mode or when the
_GNU_SOURCE macro is defined and the C++20 __cpp_char8_t feature
test macro is not defined (if __cpp_char8_t is defined, then char8_t
is a builtin type).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It was added on Linux 5.12 (2a1867219c7b27f928e2545782b86daaf9ad50bd)
to allow change the properties of a mount or a mount tree using file
descriptors which the new mount api is based on.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (a07b20004793d8926f78d63eb5980559f7813404)
to return a O_PATH-opened file descriptor to an existing mountpoint.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (cf3cba4a429be43e5527a3f78859b1bfd9ebc5fb)
that can be used to pick an existing mountpoint into an filesystem
context which can thereafter be used to reconfigure a superblock
with fsconfig syscall.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (ecdab150fddb42fe6a739335257949220033b782)
as a way to a configure filesystem creation context and trigger
actions upon it, to be used in conjunction with fsopen, fspick and
fsmount.
The fsconfig_command commands are currently only defined as an enum,
so they can't be checked on tst-mount-consts.py with current test
support.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Previously, they were assumed to be in ISO-8859-1, and that the output
charset overlapped with ISO-8859-1 for the characters actually used.
However, this did not work as intended on many architectures even for
an ISO-8859-1 output encoding because of the char signedness bug in
lr_getc. Therefore, this commit switches to UTF-8 without making
provisions for backwards compatibility.
The following Elisp code can be used to convert locale definition files
to UTF-8:
(defun glibc/convert-localedef (from to)
(interactive "r")
(save-excursion
(save-restriction
(narrow-to-region from to)
(goto-char (point-min))
(save-match-data
(while (re-search-forward "<U\\([0-9a-fA-F]+\\)>" nil t)
(let* ((codepoint (string-to-number (match-string 1) 16))
(converted
(cond
((memq codepoint '(?/ ?\ ?< ?>))
(string ?/ codepoint))
((= codepoint ?\") "<U0022>")
(t (string codepoint)))))
(replace-match converted t)))))))
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (2db154b3ea8e14b04fee23e3fdfd5e9d17fbc6ae)
as way t move a mount from one place to another and, in the next
commit, allow to attach an unattached mount tree.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
It was added on 5.2 (93766fbd2696c2c4453dd8e1070977e9cd4e6b6d) to
provide a way by which a filesystem opened with fsopen and configured
by a series of fsconfig calls can have a detached mount object
created for it.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.2 (24dcb3d90a1f67fe08c68a004af37df059d74005)
to start the process of preparing to create a superblock that will
then be mountable, using an fd as a context handle.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Added in Linux 5.15 (884a7e5964e06ed93c7771c0d7cf19c09a8946f1), the new
syscalls allows a caller to free the memory of a dying target process.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was added on Linux 5.10 (ecb8ac8b1f146915aa6b96449b66dd48984caacc)
with the same functionality as madvise but using a pidfd of the target
process.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.1(3eb39f47934f9d5a3027fe00d906a45fe3a15fad)
as a way to avoid the race condition of using kill (where PID might be
reused by the kernel between between obtaining the pid and sending the
signal).
If the siginfo_t argument is NULL then pidfd_send_signal is equivalent
to kill. If it is not NULL pidfd_send_signal is equivalent to
rt_sigqueueinfo.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.6 (8649c322f75c96e7ced2fec201e123b2b073bf09)
as a way to retrieve a file descriptors for another process though
pidfd (created either with CLONE_PIDFD or pidfd_getfd). The
functionality is similar to recvmmsg SCM_RIGHTS.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
This was added on Linux 5.3 (32fcb426ec001cb6d5a4a195091a8486ea77e2df)
as a way to retrieve a pid file descriptors for process that has not
been created CLONE_PIDFD (by usual fork/clone).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The Linux version used by i686 and m68k provide three overrrides for
generic code:
1. DISTINGUISH_LIB_VERSIONS to print additional information when
libc5 is used by a dependency.
2. EXTRA_LD_ENVVARS to that enabled LD_LIBRARY_VERSION environment
variable.
3. EXTRA_UNSECURE_ENVVARS to add two environment variables related
to aout support.
None are really requires, it has some decades since libc5 or aout
suppported was removed and Linux even remove support for aout files.
The LD_LIBRARY_VERSION is also dead code, dl_correct_cache_id is not
used anywhere.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The kernel version check is used to avoid glibc to run on older
kernels where some syscall are not available and fallback code are
not enabled to handle graciously fail. However, it does not prevent
if the kernel does not correctly advertise its version through
vDSO note, uname or procfs.
Also kernel version checks are sometime not desirable by users,
where they want to deploy on different system with different kernel
version knowing the minimum set of syscall is always presented on
such systems.
The kernel version check has been removed along with the
LD_ASSUME_KERNEL environment variable. The minimum kernel used to
built glibc is still provided through NT_GNU_ABI_TAG ELF note and
also printed when libc.so is issued.
Checked on x86_64-linux-gnu.
In commit 063f9ba220 the NEWS section
was accidentally added to the glibc 2.34 NEWS section. The NEWS entry
should have been added to glibc 2.35 which contained the committed
fix. This moves the NEWS entry to correct section.
The fix for BZ#22716 replacde LD_TRACE_LOADED_OBJECTS with
LD_TRACE_PRELINKING so mtrace could record executable address
position.
To provide the same information, LD_TRACE_LOADED_OBJECTS is
extended where a value or '2' also prints the executable address
as well. It avoid adding another loader environment variable
to be used solely for mtrace. The vDSO will be printed as
a default library (with '=>' pointing the same name), which is
ok since both mtrace and ldd already handles it.
The mtrace script is changed to also parse the new format. To
correctly support PIE and non-PIE executables, both the default
mtrace address and the one calculated as used (it fixes mtrace
for non-PIE exectuable as for BZ#22716 for PIE).
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Prelinked binaries and libraries still work, the dynamic tags
DT_GNU_PRELINKED, DT_GNU_LIBLIST, DT_GNU_CONFLICT just ignored
(meaning the process is reallocated as default).
The loader environment variable TRACE_PRELINKING is also removed,
since it used solely on prelink.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Moved LD_AUDIT notes into requirements section since the LAV_CURRENT
bump is a requirements change that impacts loading old audit modules
or new audit modules on older loaders.
The posix_spawnattr_tcsetpgrp_np works on a file descriptor (the
controlling terminal), so it would make more sense to actually fit
it on the file actions API.
Also, POSIX_SPAWN_TCSETPGROUP is not really required since it is
implicit by the presence of tcsetpgrp file action.
The posix/tst-spawn6.c is also fixed when TTY can is not present.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The rtld audit support show two problems on aarch64:
1. _dl_runtime_resolve does not preserve x8, the indirect result
location register, which might generate wrong result calls
depending of the function signature.
2. The NEON Q registers pushed onto the stack by _dl_runtime_resolve
were twice the size of D registers extracted from the stack frame by
_dl_runtime_profile.
While 2. might result in wrong information passed on the PLT tracing,
1. generates wrong runtime behaviour.
The aarch64 rtld audit support is changed to:
* Both La_aarch64_regs and La_aarch64_retval are expanded to include
both x8 and the full sized NEON V registers, as defined by the
ABI.
* dl_runtime_profile needed to extract registers saved by
_dl_runtime_resolve and put them into the new correctly sized
La_aarch64_regs structure.
* The LAV_CURRENT check is change to only accept new audit modules
to avoid the undefined behavior of not save/restore x8.
* Different than other architectures, audit modules older than
LAV_CURRENT are rejected (both La_aarch64_regs and La_aarch64_retval
changed their layout and there are no requirements to support multiple
audit interface with the inherent aarch64 issues).
* A new field is also reserved on both La_aarch64_regs and
La_aarch64_retval to support variant pcs symbols.
Similar to x86, a new La_aarch64_vector type to represent the NEON
register is added on the La_aarch64_regs (so each type can be accessed
directly).
Since LAV_CURRENT was already bumped to support bind-now, there is
no need to increase it again.
Checked on aarch64-linux-gnu.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The audit symbind callback is not called for binaries built with
-Wl,-z,now or when LD_BIND_NOW=1 is used, nor the PLT tracking callbacks
(plt_enter and plt_exit) since this would change the expected
program semantics (where no PLT is expected) and would have performance
implications (such as for BZ#15533).
LAV_CURRENT is also bumped to indicate the audit ABI change (where
la_symbind flags are set by the loader to indicate no possible PLT
trace).
To handle powerpc64 ELFv1 function descriptor, _dl_audit_symbind
requires to know whether bind-now is used so the symbol value is
updated to function text segment instead of the OPD (for lazy binding
this is done by PPC64_LOAD_FUNCPTR on _dl_runtime_resolve).
Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu,
powerpc64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Currently there is no proper way to set the controlling terminal through
posix_spawn in race free manner [1]. This forces shell implementations
to keep using fork+exec when launching background process groups,
even when using posix_spawn yields better performance.
This patch adds a new GNU extension so the creating process can
configure the created process terminal group. This is done with a new
flag, POSIX_SPAWN_TCSETPGROUP, along with two new attribute functions:
posix_spawnattr_tcsetpgrp_np, and posix_spawnattr_tcgetpgrp_np.
The function sets a new attribute, spawn-tcgroupfd, that references to
the controlling terminal.
The controlling terminal is set after the spawn-pgroup attribute, and
uses the spawn-tcgroupfd along with current creating process group
(so it is composable with POSIX_SPAWN_SETPGROUP).
To create a process and set the controlling terminal, one can use the
following sequence:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_TCSETPGROUP);
posix_spawnattr_tcsetpgrp_np (&attr, tcfd);
If the idea is also to create a new process groups:
posix_spawnattr_t attr;
posix_spawnattr_init (&attr);
posix_spawnattr_setflags (&attr, POSIX_SPAWN_TCSETPGROUP
| POSIX_SPAWN_SETPGROUP);
posix_spawnattr_tcsetpgrp_np (&attr, tcfd);
posix_spawnattr_setpgroup (&attr, 0);
The controlling terminal file descriptor is ignored if the new flag is
not set.
This interface is slight different than the one provided by QNX [2],
which only provides the POSIX_SPAWN_TCSETPGROUP flag. The QNX
documentation does not specify how the controlling terminal is obtained
nor how it iteracts with POSIX_SPAWN_SETPGROUP. Since a glibc
implementation is library based, it is more straightforward and avoid
requires additional file descriptor operations to request the caller
to setup the controlling terminal file descriptor (and it also allows
a bit less error handling by posix_spawn).
Checked on x86_64-linux-gnu and i686-linux-gnu.
[1] https://github.com/ksh93/ksh/issues/79
[2] https://www.qnx.com/developers/docs/7.0.0/index.html#com.qnx.doc.neutrino.lib_ref/topic/p/posix_spawn.html
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
No valid path returned by getcwd would fit into 1 byte, so reject the
size early and return NULL with errno set to ERANGE. This change is
prompted by CVE-2021-3999, which describes a single byte buffer
underflow and overflow when all of the following conditions are met:
- The buffer size (i.e. the second argument of getcwd) is 1 byte
- The current working directory is too long
- '/' is also mounted on the current working directory
Sequence of events:
- In sysdeps/unix/sysv/linux/getcwd.c, the syscall returns ENAMETOOLONG
because the linux kernel checks for name length before it checks
buffer size
- The code falls back to the generic getcwd in sysdeps/posix
- In the generic func, the buf[0] is set to '\0' on line 250
- this while loop on line 262 is bypassed:
while (!(thisdev == rootdev && thisino == rootino))
since the rootfs (/) is bind mounted onto the directory and the flow
goes on to line 449, where it puts a '/' in the byte before the
buffer.
- Finally on line 458, it moves 2 bytes (the underflowed byte and the
'\0') to the buf[0] and buf[1], resulting in a 1 byte buffer overflow.
- buf is returned on line 469 and errno is not set.
This resolves BZ #28769.
Reviewed-by: Andreas Schwab <schwab@linux-m68k.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Qualys Security Advisory <qsa@qualys.com>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
realpath returns an allocated string when the result exceeds PATH_MAX,
which is unexpected when its second argument is not NULL. This results
in the second argument (resolved) being uninitialized and also results
in a memory leak since the caller expects resolved to be the same as the
returned value.
Return NULL and set errno to ENAMETOOLONG if the result exceeds
PATH_MAX. This fixes [BZ #28770], which is CVE-2021-3998.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
It is similar to epoll_wait, with the difference the timeout has
nanosecond resoluting by using struct timespec instead of int.
Although Linux interface only provides 64 bit time_t support, old
32 bit interface is also provided (so keep in sync with current
practice and to no force opt-in on 64 bit time_t).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The sunrpc function svcunix_create suffers from a stack-based buffer
overflow with overlong pathname arguments.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Processing an overlong pathname in the sunrpc clnt_create function
results in a stack-based buffer overflow.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Converting double precision constants to float is now affected by the
runtime dynamic rounding mode instead of being evaluated at compile
time with default rounding mode (except static object initializers).
This can change the computed result and cause performance regression.
The known correctness issues (increased ulp errors) are already fixed,
this patch fixes remaining cases of unnecessary runtime conversions.
Add float M_* macros to math.h as new GNU extension API. To avoid
conversions the new M_* macros are used and instead of casting double
literals to float, use float literals (only required if the conversion
is inexact).
The patch was tested on aarch64 where the following symbols had new
spurious conversion instructions that got fixed:
__clog10f
__gammaf_r_finite@GLIBC_2.17
__j0f_finite@GLIBC_2.17
__j1f_finite@GLIBC_2.17
__jnf_finite@GLIBC_2.17
__kernel_casinhf
__lgamma_negf
__log1pf
__y0f_finite@GLIBC_2.17
__y1f_finite@GLIBC_2.17
cacosf
cacoshf
casinhf
catanf
catanhf
clogf
gammaf_positive
Fixes bug 28713.
Reviewed-by: Paul Zimmermann <Paul.Zimmermann@inria.fr>
Trapping SIGSEGV within the process is error-prone, adds security
issues, and modern analysis design tends to happen out of the
process (either by attaching a debugger or by post-mortem analysis).
The libSegfault also has some design problems, it uses non
async-signal-safe function (backtrace) on signal handler.
There are multiple alternatives if users do want to use similar
functionality, such as sigsegv gnulib module or libsegfault.
OpenRISC architecture specification:
https://raw.githubusercontent.com/openrisc/doc/master/openrisc-arch-1.3-rev1.pdf
Currently the port as of the 2022-01-03 rebasing there are no known
architecture specific test failures.
Writing credits for the port are:
Stafford Horne <shorne@gmail.com>
Christian Svensson <blue@cmd.nu>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
It can be used to speed up the libgcc unwinder, and the internal
_dl_find_dso_for_object function (which is used for caller
identification in dlopen and related functions, and in dladdr).
_dl_find_object is in the internal namespace due to bug 28503.
If libgcc switches to _dl_find_object, this namespace issue will
be fixed. It is located in libc for two reasons: it is necessary
to forward the call to the static libc after static dlopen, and
there is a link ordering issue with -static-libgcc and libgcc_eh.a
because libc.so is not a linker script that includes ld.so in the
glibc build tree (so that GCC's internal -lc after libgcc_eh.a does
not pick up ld.so).
It is necessary to do the i386 customization in the
sysdeps/x86/bits/dl_find_object.h header shared with x86-64 because
otherwise, multilib installations are broken.
The implementation uses software transactional memory, as suggested
by Torvald Riegel. Two copies of the supporting data structures are
used, also achieving full async-signal-safety.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The rtld-audit interfaces introduces a slowdown due to enabling
profiling instrumentation (as if LD_AUDIT implied LD_PROFILE).
However, instrumenting is only necessary if one of audit libraries
provides PLT callbacks (la_pltenter or la_pltexit symbols). Otherwise,
the slowdown can be avoided.
The following patch adjusts the logic that enables profiling to iterate
over all audit modules and check if any of those provides a PLT hook.
To keep la_symbind to work even without PLT callbacks, _dl_fixup now
calls the audit callback if the modules implements it.
Co-authored-by: Alexander Monakov <amonakov@ispras.ru>
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
%#m prints errno as an error constant if one is available, or
a decimal number as a fallback. This intends to address the gap
that strerrorname_np does not work well with printf for unknown
error codes due to its NULL return values in those cases.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
With the morecore hook removed, there is not easy way to provide huge
pages support on with glibc allocator without resorting to transparent
huge pages. And some users and programs do prefer to use the huge pages
directly instead of THP for multiple reasons: no splitting, re-merging
by the VM, no TLB shootdowns for running processes, fast allocation
from the reserve pool, no competition with the rest of the processes
unlike THP, no swapping all, etc.
This patch extends the 'glibc.malloc.hugetlb' tunable: the value
'2' means to use huge pages directly with the system default size,
while a positive value means and specific page size that is matched
against the supported ones by the system.
Currently only memory allocated on sysmalloc() is handled, the arenas
still uses the default system page size.
To test is a new rule is added tests-malloc-hugetlb2, which run the
addes tests with the required GLIBC_TUNABLE setting. On systems without
a reserved huge pages pool, is just stress the mmap(MAP_HUGETLB)
allocation failure. To improve test coverage it is required to create
a pool with some allocated pages.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
Linux Transparent Huge Pages (THP) current supports three different
states: 'never', 'madvise', and 'always'. The 'never' is
self-explanatory and 'always' will enable THP for all anonymous
pages. However, 'madvise' is still the default for some system and
for such case THP will be only used if the memory range is explicity
advertise by the program through a madvise(MADV_HUGEPAGE) call.
To enable it a new tunable is provided, 'glibc.malloc.hugetlb',
where setting to a value diffent than 0 enables the madvise call.
This patch issues the madvise(MADV_HUGEPAGE) call after a successful
mmap() call at sysmalloc() with sizes larger than the default huge
page size. The madvise() call is disable is system does not support
THP or if it has the mode set to "never" and on Linux only support
one page size for THP, even if the architecture supports multiple
sizes.
To test is a new rule is added tests-malloc-hugetlb1, which run the
addes tests with the required GLIBC_TUNABLE setting.
Checked on x86_64-linux-gnu.
Reviewed-by: DJ Delorie <dj@redhat.com>
The default has to change eventually, and there are no known failures
that require a delay.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Build glibc programs and tests as PIE by default and enable static-pie
automatically if the architecture and toolchain supports it.
Also add a new configuration option --disable-default-pie to prevent
building programs as PIE.
Only the following architectures now have PIE disabled by default
because they do not work at the moment. hppa, ia64, alpha and csky
don't work because the linker is unable to handle a pcrel relocation
generated from PIE objects. The microblaze compiler is currently
failing with an ICE. GNU hurd tries to enable static-pie, which does
not work and hence fails. All these targets have default PIE disabled
at the moment and I have left it to the target maintainers to enable PIE
on their targets.
build-many-glibcs runs clean for all targets. I also tested x86_64 on
Fedora and Ubuntu, to verify that the default build as well as
--disable-default-pie work as expected with both system toolchains.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Remove the LD_PREFER_MAP_32BIT_EXEC environment variable support since
the first PT_LOAD segment is no longer executable due to defaulting to
-z separate-code.
This fixes [BZ #28656].
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This makes ld.so features such as --preload, --audit,
and --list-diagnostics more accessible to end users because they
do not need to know the ABI name of the dynamic loader.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The relationship between the thread pointer and the rseq area
is made explicit. The constant offset can be used by JIT compilers
to optimize rseq access (e.g., for really fast sched_getcpu).
Extensibility is provided through __rseq_size and __rseq_flags.
(In the future, the kernel could request a different rseq size
via the auxiliary vector.)
Co-Authored-By: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Programs without dynamic dependencies and without a program
interpreter are now run via execve.
Previously, the dynamic linker either crashed while attempting to
read a non-existing dynamic segment (looking for DT_AUDIT/DT_DEPAUDIT
data), or the self-relocated in the static PIE executable crashed
because the outer dynamic linker had already applied RELRO protection.
<dl-execve.h> is needed because execve is not available in the
dynamic loader on Hurd.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
C2X adds a printf %b format (see
<http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2630.pdf>, accepted
for C2X), for outputting integers in binary. It also has recommended
practice for a corresponding %B format (like %b, but %#B starts the
output with 0B instead of 0b). Add support for these formats to
glibc.
One existing test uses %b as an example of an unknown format, to test
how glibc printf handles unknown formats; change that to %v. Use of
%b and %B as user-registered format specifiers continues to work (and
we already have a test that covers that, tst-printfsz.c).
Note that C2X also has scanf %b support, plus support for binary
constants starting 0b in strtol (base 0 and 2) and scanf %i (strtol
base 0 and scanf %i coming from a previous paper that added binary
integer literals). I intend to implement those features in a separate
patch or patches; as discussed in the thread starting at
<https://sourceware.org/pipermail/libc-alpha/2020-December/120414.html>,
they will be more complicated because they involve adding extra public
symbols to ensure compatibility with existing code that might not
expect 0b constants to be handled by strtol base 0 and 2 and scanf %i,
whereas simply adding a new format specifier poses no such
compatibility concerns.
Note that the actual conversion from integer to string uses existing
code in _itoa.c. That code has special cases for bases 8, 10 and 16,
probably so that the compiler can optimize division by an integer
constant in the code for those bases. If desired such special cases
could easily be added for base 2 as well, but that would be an
optimization, not actually needed for these printf formats to work.
Tested for x86_64 and x86. Also tested with build-many-glibcs.py for
aarch64-linux-gnu with GCC mainline to make sure that the test does
indeed build with GCC 12 (where format checking warnings are enabled
for most of the test).
This second patch contains the actual implementation of a new sorting algorithm
for shared objects in the dynamic loader, which solves the slow behavior that
the current "old" algorithm falls into when the DSO set contains circular
dependencies.
The new algorithm implemented here is simply depth-first search (DFS) to obtain
the Reverse-Post Order (RPO) sequence, a topological sort. A new l_visited:1
bitfield is added to struct link_map to more elegantly facilitate such a search.
The DFS algorithm is applied to the input maps[nmap-1] backwards towards
maps[0]. This has the effect of a more "shallow" recursion depth in general
since the input is in BFS. Also, when combined with the natural order of
processing l_initfini[] at each node, this creates a resulting output sorting
closer to the intuitive "left-to-right" order in most cases.
Another notable implementation adjustment related to this _dl_sort_maps change
is the removing of two char arrays 'used' and 'done' in _dl_close_worker to
represent two per-map attributes. This has been changed to simply use two new
bit-fields l_map_used:1, l_map_done:1 added to struct link_map. This also allows
discarding the clunky 'used' array sorting that _dl_sort_maps had to sometimes
do along the way.
Tunable support for switching between different sorting algorithms at runtime is
also added. A new tunable 'glibc.rtld.dynamic_sort' with current valid values 1
(old algorithm) and 2 (new DFS algorithm) has been added. At time of commit
of this patch, the default setting is 1 (old algorithm).
Signed-off-by: Chung-Lin Tang <cltang@codesourcery.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Intel MPX failed to gain wide adoption and has been deprecated for a
while. GCC 9.1 removed Intel MPX support. Linux kernel removed MPX in
2019.
This patch removes the support code from the dynamic loader.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Unicode 14.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 14.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Total added characters in newly generated CHARMAP: 838
Total removed characters in newly generated WIDTH: 1
(Characters not in WIDTH get width 1 by default, i.e. these have width 1 now.)
removed: <U1734> 0 : eaw=N category=Mc bidi=L name=HANUNOO SIGN PAMUDPOD
That seems intentional, the character had category Mn (Mark, nonspacing) before
and now has Mc (Mark, spacing combining)
Total changed characters in newly generated WIDTH: 0
Total added characters in newly generated WIDTH: 175
C2X adds a macro _PRINTF_NAN_LEN_MAX to <stdio.h>, giving the maximum
length of printf output for a NaN. glibc never includes an
n-char-sequence in its printf output for NaNs, so the correct value
for glibc is 4 ("-nan" or "-NAN"); define the macro accordingly.
This patch makes the macro definition conditional on __GLIBC_USE
(ISOC2X), as is generally done with features from new standard
versions. The name is in the implementation namespace for older
standards, so it would also be possible to define it unconditionally.
Tested for x86_64.
glibc has had exp10 functions since long before they were
standardized; now they are standardized in TS 18661-4 and C2X, they
are also specified there to have a corresponding type-generic macro.
Add one to <tgmath.h>, so fixing bug 26108.
glibc doesn't have other functions from TS 18661-4 yet, but when
added, it will be natural to add the type-generic macro for each
function family at the same time as the functions.
Tested for x86_64.
C2X adds new <math.h> functions for floating-point maximum and
minimum, corresponding to the new operations that were added in IEEE
754-2019 because of concerns about the old operations not being
associative in the presence of signaling NaNs. fmaximum and fminimum
handle NaNs like most <math.h> functions (any NaN argument means the
result is a quiet NaN). fmaximum_num and fminimum_num handle both
quiet and signaling NaNs the way fmax and fmin handle quiet NaNs (if
one argument is a number and the other is a NaN, return the number),
but still raise "invalid" for a signaling NaN argument, making them
exceptions to the normal rule that a function with a floating-point
result raising "invalid" also returns a quiet NaN. fmaximum_mag,
fminimum_mag, fmaximum_mag_num and fminimum_mag_num are corresponding
functions returning the argument with greatest or least absolute
value. All these functions also treat +0 as greater than -0. There
are also corresponding <tgmath.h> type-generic macros.
Add these functions to glibc. The implementations use type-generic
templates based on those for fmax, fmin, fmaxmag and fminmag, and test
inputs are based on those for those functions with appropriate
adjustments to the expected results. The RISC-V maintainers might
wish to add optimized versions of fmaximum_num and fminimum_num (for
float and double), since RISC-V (F extension version 2.2 and later)
provides instructions corresponding to those functions - though it
might be at least as useful to add architecture-independent built-in
functions to GCC and teach the RISC-V back end to expand those
functions inline, which is what you generally want for functions that
can be implemented with a single instruction.
Tested for x86_64 and x86, and with build-many-glibcs.py.
TS 18661-1 and C2X specify predefined macros __STDC_IEC_60559_BFP__
and __STDC_IEC_60559_COMPLEX__, making __STDC_IEC_559__ and
__STDC_IEC_559_COMPLEX__ obsolescent (but still included in the
standard). Now that we have all the functions from TS 18661-1, define
these macros in stdc-predef.h, under the same conditions in which the
older macros are defined, since support for the floating-point
features in TS 18661-1 is now at the same level as that for those in
C11 and before (all library functions and other library APIs present,
but no standard pragma support).
The macros are defined for now with their TS 18661-1 values. C2X will
give them new values (listed as yyyymmL in the working drafts until
the final standard), at which point there will be the question of what
value to use in stdc-predef.h (where it could depend on
__STDC_VERSION__, but not on feature test macros defined by the user).
My inclination then would be to use the C2X value unconditionally
rather than using an older value to indicate TS support, and only have
any C standard version conditionals for the value when subsequent C
standard versions define further values.
(Note that I'm also inclined, when we implement the C2X change to the
return types of fromfp functions, to make that change unconditional
much like the change made to the types of totalorder functions, with
the old version only supported with compat symbols for already-linked
programs and not as an API for newly built objects. So using the C2X
value would also accurately reflect not supporting the versions of
APIs in the TS where those ended up being incompatible with the first
version actually added to the standard.)
Tested for x86_64.
