GCC 6.5 fails to correctly build ldconfig with recent ld.so.cache
commits, e.g.:
785969a047
elf: Implement a string table for ldconfig, with tail merging
If glibc is build with gcc 6.5.0:
__builtin_add_overflow is used in
<glibc>/elf/stringtable.c:stringtable_finalize()
which leads to ldconfig failing with "String table is too large".
This is also recognizable in following tests:
FAIL: elf/tst-glibc-hwcaps-cache
FAIL: elf/tst-glibc-hwcaps-prepend-cache
FAIL: elf/tst-ldconfig-X
FAIL: elf/tst-ldconfig-bad-aux-cache
FAIL: elf/tst-ldconfig-ld_so_conf-update
FAIL: elf/tst-stringtable
See gcc "Bug 98269 - gcc 6.5.0 __builtin_add_overflow() with small
uint32_t values incorrectly detects overflow"
(https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98269)
float_t supposedly represents the type that is used to evaluate float
expressions internally. While the isa supports single-precision float
operations, the port of glibc to s390 incorrectly deferred to the
generic definitions which, back then, tied float_t to double. gcc by
default evaluates float in single precision, so that scenario violates
the C standard (sections 5.2.4.2.2 and 7.12 in C11/C17). With
-fexcess-precision=standard, gcc evaluates float in double precision,
which aligns with the standard yet at the cost of added conversion
instructions.
With this patch, we drop the s390-specific definition of float_t and
defer to the default behavior, which aligns float_t with the
compiler-defined FLT_EVAL_METHOD in a standard-compliant way.
Checked on s390x-linux-gnu with 31-bit and 64-bit builds.
The IBM1364, IBM1371, IBM1388, IBM1390 and IBM1399 character sets
share converter logic (iconvdata/ibm1364.c) which would reject
redundant shift sequences when processing input in these character
sets. This led to a hang in the iconv program (CVE-2020-27618).
This commit adjusts the converter to ignore redundant shift sequences
and adds test cases for iconv_prog hangs that would be triggered upon
their rejection. This brings the implementation in line with other
converters that also ignore redundant shift sequences (e.g. IBM930
etc., fixed in commit 692de4b396).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
I couldn't pinpoint which standard has added it, but no other POSIX
system supports it and/or no longer provide it. The 'struct vtimes'
also has a lot of drawbacks due its limited internal type size.
I couldn't also see find any project that actually uses this symbol,
either in some dignostic way (such as sanitizer). So I think it should
be safer to just move to compat symbol, instead of deprecated. The
idea it to avoid new ports to export such broken interface (riscv32
for instance).
Checked on x86_64-linux-gnu and i686-linux-gnu.
This functionality does not seem to be useful since static dlopen
is mostly used for iconv/character set conversion and NSS support.
gconv modules are loaded with full paths anyway, so that the
HWCAP subdirectory logic does not apply.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Current systems do not have BSD terminals, so the fallback code in
posix_openpt/getpt does not do anything. Also remove the file system
check for /dev/pts. Current systems always have a devpts file system
mounted there if /dev/ptmx exists.
grantpt is now essentially a no-op. It only verifies that the
argument is a ptmx-descriptor. Therefore, this change indirectly
addresses bug 24941.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This patch adds the ABI-related bits to reflect the new mallinfo2
function, and adds a test case to verify basic functionality.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Install <sys/platform/x86.h> so that programmers can do
#if __has_include(<sys/platform/x86.h>)
#include <sys/platform/x86.h>
#endif
...
if (CPU_FEATURE_USABLE (SSE2))
...
if (CPU_FEATURE_USABLE (AVX2))
...
<sys/platform/x86.h> exports only:
enum
{
COMMON_CPUID_INDEX_1 = 0,
COMMON_CPUID_INDEX_7,
COMMON_CPUID_INDEX_80000001,
COMMON_CPUID_INDEX_D_ECX_1,
COMMON_CPUID_INDEX_80000007,
COMMON_CPUID_INDEX_80000008,
COMMON_CPUID_INDEX_7_ECX_1,
/* Keep the following line at the end. */
COMMON_CPUID_INDEX_MAX
};
struct cpuid_features
{
struct cpuid_registers cpuid;
struct cpuid_registers usable;
};
struct cpu_features
{
struct cpu_features_basic basic;
struct cpuid_features features[COMMON_CPUID_INDEX_MAX];
};
/* Get a pointer to the CPU features structure. */
extern const struct cpu_features *__x86_get_cpu_features
(unsigned int max) __attribute__ ((const));
Since all feature checks are done through macros, programs compiled with
a newer <sys/platform/x86.h> are compatible with the older glibc binaries
as long as the layout of struct cpu_features is identical. The features
array can be expanded with backward binary compatibility for both .o and
.so files. When COMMON_CPUID_INDEX_MAX is increased to support new
processor features, __x86_get_cpu_features in the older glibc binaries
returns NULL and HAS_CPU_FEATURE/CPU_FEATURE_USABLE return false on the
new processor feature. No new symbol version is neeeded.
Both CPU_FEATURE_USABLE and HAS_CPU_FEATURE are provided. HAS_CPU_FEATURE
can be used to identify processor features.
Note: Although GCC has __builtin_cpu_supports, it only supports a subset
of <sys/platform/x86.h> and it is equivalent to CPU_FEATURE_USABLE. It
doesn't support HAS_CPU_FEATURE.
There is already RISC-V 64-bit port information in the documentation.
Let's add some documentation entries for the RISC-V 32-bit as well.
Reviewed-by: Maciej W. Rozycki <macro@wdc.com>
After some discussions it seems the original news was not clear
and that it is valid to manually pass the branch protection flags
iff GCC target libs are built with them too. The main difference
between manually passing the flags and using the configure
option is that the latter also makes branch protection the
default in GCC which may not be desirable in some cases.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It was fixed in commit d937694059
("Fix array overflow in backtrace on PowerPC (bug 25423)"), which
went into glibc 2.31.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Storing user databases in DNS, without client-side DNSSEC validation,
is problematic from a security point of view.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The kernel ABI is not finalized, and there are now various proposals
to change the size of struct rseq, which would make the glibc ABI
dependent on the version of the kernels used for building glibc.
This is of course not acceptable.
This reverts commit 48699da1c4 ("elf:
Support at least 32-byte alignment in static dlopen"), commit
8f4632deb3 ("Linux: rseq registration
tests"), commit 6e29cb3f61 ("Linux: Use
rseq in sched_getcpu if available"), and commit
0c76fc3c2b ("Linux: Perform rseq
registration at C startup and thread creation"), resolving the conflicts
introduced by the ARC port and the TLS static surplus changes.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Sun RPC was removed from glibc. This includes rpcgen program, librpcsvc,
and Sun RPC headers. Also test for bug #20790 was removed
(test for rpcgen).
Backward compatibility for old programs is kept only for architectures
and ABIs that have been added in or before version 2.28.
libtirpc is mature enough, librpcsvc and rpcgen are provided in
rpcsvc-proto project.
NOTE: libnsl code depends on Sun RPC (installed libnsl headers use
installed Sun RPC headers), thus --enable-obsolete-rpc was a dependency
for --enable-obsolete-nsl (removed in a previous commit).
The arc ABI list file has to be updated because the port was added
with the sunrpc symbols
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
__morecore, __after_morecore_hook, and __default_morecore had not
been deprecated in commit 7d17596c19
("Mark malloc hook variables as deprecated"), probably by accident.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Unicode 13.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 13.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Total added characters in newly generated CHARMAP: 5930
Total added characters in newly generated WIDTH: 5536
this means that *always* libnsl is only built as shared library for
backward compatibility and the NSS modules libnss_nis and libnss_nisplus
are not built at all, libnsl's headers aren't installed.
This compatibility is kept only for architectures and ABIs that have
been added in or before version 2.28.
Replacement implementations based on TIRPC, which additionally support
IPv6, are available from <https://github.com/thkukuk/>.
This change does not affect libnss_compat which does not depended
on libnsl since 2.27 and thus can be used without NIS.
libnsl code depends on Sun RPC, e.g. on --enable-obsolete-rpc (installed
libnsl headers use installed Sun RPC headers), which will be removed in
the following commit.
The interface has hard-coded buffer sizes and is therefore tied to
DES. It also does not match current practice where different
services on the same host use different key material.
This change simplifies removal of the sunrpc code.
The strerrorname_np returns error number name (e.g. "EINVAL" for EINVAL)
while strerrordesc_np returns string describing error number (e.g
"Invalid argument" for EINVAL). Different than strerror,
strerrordesc_np does not attempt to translate the return description,
both functions return NULL for an invalid error number.
They should be used instead of sys_errlist and sys_nerr, both are
thread and async-signal safe. These functions are GNU extensions.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The sigabbrev_np returns the abbreviated signal name (e.g. "HUP" for
SIGHUP) while sigdescr_np returns the string describing the error
number (e.g "Hangup" for SIGHUP). Different than strsignal,
sigdescr_np does not attempt to translate the return description and
both functions return NULL for an invalid signal number.
They should be used instead of sys_siglist or sys_sigabbrev and they
are both thread and async-signal safe. They are added as GNU
extensions on string.h header (same as strsignal).
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
If the thread is terminated then __libc_thread_freeres will free the
storage via __glibc_tls_internal_free.
It is only within the calling thread that this matters. It makes
strerror MT-safe.
Checked on x86-64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
and s390x-linux-gnu.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The symbol is deprecated by strerror since its usage imposes some issues
such as copy relocations.
Its internal name is also changed to _sys_errlist_internal to avoid
static linking usage. The compat code is also refactored by removing
the over enginered errlist-compat.c generation from manual entried and
extra comment token in linker script file. It disantangle the code
generation from manual and simplify both Linux and Hurd compat code.
The definitions from errlist.c are moved to errlist.h and a new test
is added to avoid a new errno entry without an associated one in manual.
Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi
on all affected platforms.
Tested-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The symbol was deprecated by strsignal and its usage imposes issues
such as copy relocations.
Its internal name is changed to __sys_siglist and __sys_sigabbrev to
avoid static linking usage. The compat code is also refactored, since
both Linux and Hurd usage the same strategy: export the same array with
different object sizes.
The libSegfault change avoids calling strsignal on the SIGFAULT signal
handler (the current usage is already sketchy, adding a call that
potentially issue locale internal function is even sketchier).
Checked on x86_64-linux-gnu and i686-linux-gnu. I also run a check-abi
on all affected platforms.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The variable is placed in libc.so, and it can be true only in
an outer libc, not libcs loaded via dlmopen or static dlopen.
Since thread creation from inner namespaces does not work,
pthread_create can update __libc_single_threaded directly.
Using __libc_early_init and its initial flag, implementation of this
variable is very straightforward. A future version may reset the flag
during fork (but not in an inner namespace), or after joining all
threads except one.
Reviewed-by: DJ Delorie <dj@redhat.com>
Register rseq TLS for each thread (including main), and unregister for
each thread (excluding main). "rseq" stands for Restartable Sequences.
See the rseq(2) man page proposed here:
https://lkml.org/lkml/2018/9/19/647
Those are based on glibc master branch commit 3ee1e0ec5c.
The rseq system call was merged into Linux 4.18.
The TLS_STATIC_SURPLUS define is increased to leave additional room for
dlopen'd initial-exec TLS, which keeps elf/tst-auditmany working.
The increase (76 bytes) is larger than 32 bytes because it has not been
increased in quite a while. The cost in terms of additional TLS storage
is quite significant, but it will also obscure some initial-exec-related
dlopen failures.
This needs a few test adjustments: In some cases, sigignore was
used for convenience (replaced with xsignal with SIG_IGN). Tests
for the deprecated functions need to disable
-Wdeprecated-declarations, and for the sigmask deprecation,
-Wno-error.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
On platforms where long double may have two different formats, i.e.: the
same format as double (64-bits) or something else (128-bits), building
with -mlong-double-128 is the default and function calls in the user
program match the name of the function in Glibc. When building with
-mlong-double-64, Glibc installed headers redirect such calls to the
appropriate function.
Likewise, the internals of glibc are now built against IEEE long double.
However, the only (minimally) notable usage of long double is difftime.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
Add compiler feature tests to ensure we can build ieee128 long double.
These test for -mabi=ieeelongdouble, -mno-gnu-attribute, and -Wno-psabi.
Likewise, verify some compiler bugs have been addressed. These aren't
helpful for building glibc, but may cause test failures when testing
the new long double. See notes below from Raji.
On powerpc64le, some older compiler versions give error for the function
signbit() for 128-bit floating point types. This is fixed by PR83862
in gcc 8.0 and backported to gcc6 and gcc7. This patch adds a test
to check compiler version to avoid compiler errors during make check.
Likewise, test for -mno-gnu-attribute support which was
On powerpc64le, a few files are built on IEEE long double mode
(-mabi=ieeelongdouble), whereas most are built on IBM long double mode
(-mabi=ibmlongdouble, the default for -mlong-double-128). Since binutils
2.31, linking object files with different long double modes causes
errors similar to:
ld: libc_pic.a(s_isinfl.os) uses IBM long double,
libc_pic.a(ieee128-qefgcvt.os) uses IEEE long double.
collect2: error: ld returned 1 exit status
make[2]: *** [../Makerules:649: libc_pic.os] Error 1
The warnings are fair and correct, but in order for glibc to have
support for both long double modes on powerpc64le, they have to be
ignored. This can be accomplished with the use of -mno-gnu-attribute
option when building the few files that require IEEE long double mode.
However, -mno-gnu-attribute is not available in GCC 6, the minimum
version required to build glibc, so this patch adds a test for this
feature in powerpc64le builds, and fails early if it's not available.
Co-Authored-By: Rajalakshmi Srinivasaraghavan <raji@linux.vnet.ibm.com>
Co-Authored-By: Gabriel F. T. Gomes <gabrielftg@linux.ibm.com>
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
This change should not have an effect because the system call was
never defined. Also add the misssing attribute_compat_text_section
attribute to the sstk function (a minor optimization). Also update the
NEWS file to document the change.
Fixes commit 9cc93ba097
("misc: Turn sstk into a compat symbol").
Unicode 13.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 13.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Total added characters in newly generated CHARMAP: 5930
Total added characters in newly generated WIDTH: 5536
Linux 5.5 remove the system call in commit
61a47c1ad3a4dc6882f01ebdc88138ac62d0df03 ("Linux: Remove
<sys/sysctl.h>"). Therefore, the compat function is just a stub that
sets ENOSYS.
Due to SHLIB_COMPAT, new ports will not add the sysctl function anymore
automatically.
x32 already lacks the sysctl function, so an empty sysctl.c file is
used to suppress it. Otherwise, a new compat symbol would be added.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
binutils ld has supported --audit, --depaudit for a long time,
only support in glibc has been missing.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Match up with list-fixed-bugs.py and also with the fact that many
email clients default to 72 chars when composing emails.
Reviewed-by: Joseph Myers <joseph@codesourcery.com>
This internal change ideally should not affect the public API or ABI,
but there is a widespread use of seccomp sandboxes, even on 32-bit
targets, that don't handle new Linux syscall usage well, so it's
worth mentioning in the NEWS.
Co-authored-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The change was introduced in:
commit 33bc9efd91
Author: Dragan Mladjenovic <dmladjenovic@wavecomp.com>
Date: Fri Aug 23 16:38:04 2019 +0000
mips: Force RWX stack for hard-float builds that can run on pre-4.8 kernels
and probably requires a small explanation.
Co-authored-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Mostly English grammar and style improvements. The bullet list is
reorganized a little for clarity. The details of exactly which
Linux-based ports still report system-wide time zone information
from gettimeofday has been removed, as this is not intended to be
something people should rely on.
Also clarify the deprecation of older SPARC ISAs, based on the fact
that “SPARC version 7” is actually the very first version of the SPARC
ISA (Sun Microsystems was very fond of letting the marketing
department pick version numbers).
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
We no longer write manual ChangeLog entries since they are
auto-generated at release time. Drop dependency of the `make dist`
target on the file and document the fact that the latest ChangeLog
entries can be read in the highest numbered ChangeLog.N file in
ChangeLog.old.
The ChangeLog.old/ChangeLog.20 file for 2.31 will thus be generated
just before tagging a release.
Reviewed-by: Paul Eggert <eggert@cs.ucla.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Use <arch-syscall.h> instead of <asm/unistd.h> to obtain the system
call numbers. A few direct includes of <asm/unistd.h> need to be
removed (if the system call numbers are already provided indirectly
by <sysdep.h>) or replaced with <sys/syscall.h>.
Current Linux headers for alpha define the required system call names,
so most of the _NR_* hacks are no longer needed. For the 32-bit arm
architecture, eliminate the INTERNAL_SYSCALL_ARM macro, now that we
have regular system call names for cacheflush and set_tls. There are
more such cleanup opportunities for other architectures, but these
cleanups are required to avoid macro redefinition errors during the
build.
For ia64, it is desirable to use <asm/break.h> directly to obtain
the break number for system calls (which is not a system call number
itself). This requires replacing __BREAK_SYSCALL with
__IA64_BREAK_SYSCALL because the former is defined as an alias in
<asm/unistd.h>, but not in <asm/break.h>.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
I've updated copyright dates in glibc for 2020. This is the patch for
the changes not generated by scripts/update-copyrights and subsequent
build / regeneration of generated files. As well as the usual annual
updates, mainly dates in --version output (minus libc.texinfo which
previously had to be handled manually but is now successfully updated
by update-copyrights), there is a fix to
sysdeps/unix/sysv/linux/powerpc/bits/termios-c_lflag.h where a typo in
the copyright notice meant it failed to be updated automatically.
Please remember to include 2020 in the dates for any new files added
in future (which means updating any existing uncommitted patches you
have that add new files to use the new copyright dates in them).
If a lazy binding failure happens during the execution of an ELF
constructor or destructor, the dynamic loader catches the error
and reports it using the dlerror mechanism. This is undesirable
because there could be other constructors and destructors that
need processing (which are skipped), and the process is in an
inconsistent state at this point. Therefore, we have to issue
a fatal dynamic loader error error and terminate the process.
Note that the _dl_catch_exception in _dl_open is just an inner catch,
to roll back some state locally. If called from dlopen, there is
still an outer catch, which is why calling _dl_init via call_dl_init
and a no-exception is required and cannot be avoiding by moving the
_dl_init call directly into _dl_open.
_dl_fini does not need changes because it does not install an error
handler, so errors are already fatal there.
Change-Id: I6b1addfe2e30f50a1781595f046f44173db9491a
This introduces a concept of trusted name servers, for which the
AD bit is passed through to applications. For untrusted name
servers (the default), the AD bit in responses are cleared, to
provide a safe default.
This approach is very similar to the one suggested by Pavel Šimerda
in <https://bugzilla.redhat.com/show_bug.cgi?id=1164339#c15>.
The DNS test framework in support/ is enhanced with support for
setting the AD bit in responses.
Tested on x86_64-linux-gnu.
Change-Id: Ibfe0f7c73ea221c35979842c5c3b6ed486495ccc
The patch is straighforward:
- The sparc32 v8 implementations are moved as the generic ones.
- A configure test is added to check for either __sparc_v8__ or
__sparc_v9__.
- The triple names are simplified and sparc implies sparcv8.
The idea is to keep support on sparcv8 architectures that does support
CAS instructions, such as LEON3/LEON4.
Checked on a sparcv9-linux-gnu and sparc64-linux-gnu.
Tested-by: Andreas Larsson <andreas@gaisler.com>
Introduce pthread_clockjoin_np as a version of pthread_timedjoin_np that
accepts a clockid_t parameter to indicate which clock the timeout should be
measured against. This mirrors the recently-added POSIX-proposed "clock"
wait functions.
Checked on x86_64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Consolidate generic gettimeofday implementation to use clock_gettime.
Linux ports that still provide gettimeofday through vDSO are not
changed.
Remove sysdeps/unix/clock_gettime.c, which implemented clock_gettime
using gettimeofday; new OS ports must provide a real implementation of
clock_gettime.
Rename sysdeps/mach/gettimeofday.c to sysdeps/mach/clock_gettime.c and
convert into an implementation of clock_gettime. It only supports
CLOCK_REALTIME; Mach does not appear to have any support for monotonic
clocks. It uses __host_get_time, which provides at best microsecond
resolution. Hurd is currently using sysdeps/posix/clock_getres.c for
clock_getres; its output for CLOCK_REALTIME is based on
sysconf (_SC_CLK_TCK), and I do not know whether that gives the
correct result.
Unlike settimeofday, there are no known uses of gettimeofday's
vestigial "get time zone" feature that are not bugs. (The per-process
timezone support in localtime and friends is unrelated, and the
programs that set the kernel's offset between the hardware clock and
UTC do not need to read it back.) Therefore, this feature is dummied
out. Henceforth, if gettimeofday's "struct timezone" argument is not
NULL, it will write zeroes to both fields. Any program that is
actually looking at this data will thus think it is running in UTC,
which is probably more correct than whatever it was doing before.
[__]gettimeofday no longer has any internal callers, so we can now
remove its internal prototype and PLT bypass aliases. The
__gettimeofday@GLIBC_2.0 export remains, in case it is used by any
third-party code.
It also allows to simplify the arch-specific implementation on x86 and
powerpc to remove the hack to disable the internal route to non iFUNC
variant for internal symbol.
This patch also fixes a missing optimization on aarch64, powerpc, and
x86 where the code used on static build do not use the vDSO.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Co-authored-by: Zack Weinberg <zackw@panix.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
ftime is an obsolete variation on gettimeofday, offering only
millisecond time resolution; it was probably a system call in ooold
versions of BSD Unix. For historic reasons, we had three
implementations of it. These are all consolidated into time/ftime.c,
and then the function is deprecated.
For some reason, the implementation of ftime in terms of gettimeofday
was rounding rather than truncating microseconds to milliseconds. In
all the other places where we use a higher-resolution time function to
implement a lower-resolution one, we truncate. ftime is changed to
match, just for tidiness' sake.
Like gettimeofday, ftime tries to report the time zone, and using that
information is always a bug. This patch dummies out the reported
timezone information; the timezone and dstflag fields of the
returned "struct timeb" will always be zero.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, and powerpc-linux-gnu.
Co-authored-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Unconditionally, on all ports, use clock_settime to implement
settimeofday. Remove sysdeps/unix/clock_settime.c, which implemented
clock_settime by calling settimeofday; new OS ports must henceforth
provide a real implementation of clock_settime.
Hurd had a real implementation of settimeofday but not of
clock_settime; this patch converts it into an implementation of
clock_settime. It only supports CLOCK_REALTIME and microsecond
resolution; Hurd/Mach does not appear to have any support for
finer-resolution clocks.
The vestigial "set time zone" feature of settimeofday complicates the
generic settimeofday implementation a little. The only remaining uses
of this feature that aren't just bugs, are using it to inform the
Linux kernel of the offset between the hardware clock and UTC, on
systems where the hardware clock doesn't run in UTC (usually because
of dual-booting with Windows). There currently isn't any other way to
do this. However, the callers that do this call settimeofday with
_only_ the timezone argument non-NULL. Therefore, glibc's new
behavior is: callers of settimeofday must supply one and only one of
the two arguments. If both arguments are non-NULL, or both arguments
are NULL, the call fails and sets errno to EINVAL.
When only the timeval argument is supplied, settimeofday calls
__clock_settime(CLOCK_REALTIME), same as stime.
When only the timezone argument is supplied, settimeofday calls a new
internal function called __settimezone. On Linux, only, this function
will pass the timezone structure to the settimeofday system call. On
all other operating systems, and on Linux architectures that don't
define __NR_settimeofday, __settimezone is a stub that always sets
errno to ENOSYS and returns -1.
The settimeoday syscall is enabled on Linux by the flag
COMPAT_32BIT_TIME, which is an option to either 32-bits ABIs or COMPAT
builds (defined usually by 64-bit kernels that want to support 32-bit
ABIs, such as x86). The idea to future 64-bit time_t only ABIs
is to not provide settimeofday syscall.
The same semantics are implemented for Linux/Alpha's GLIBC_2.0 compat
symbol for settimeofday.
There are no longer any internal callers of __settimeofday, so the
internal prototype is removed.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Unconditionally, on all ports, use clock_settime to implement stime,
not settimeofday or a direct syscall. Then convert stime into a
compatibility symbol and remove its prototype from time.h.
Checked on x86_64-linux-gnu, i686-linux-gnu, powerpc64le-linux-gnu,
powerpc64-linux-gnu, powerpc-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
When adding some of the TS 18661 narrowing functions for glibc 2.28, I
deferred adding corresponding <tgmath.h> support because of unresolved
questions about the specification for those type-generic macros,
especially in relation to _FloatN and _FloatNx types.
Those issues are now clarified in the response to Clarification
Request 13 to TS 18661-3, and this patch adds the deferred tgmath.h
support. As with other tgmath.h macros, there are fairly
straightforward implementations based on __builtin_tgmath for GCC 8
and later, which result in exactly the right function being called in
each case, and more complicated implementations for GCC 7 and earlier,
which generally result in a function being called whose arguments have
the right format (i.e. an alias for the right function), but which
might not be exactly the function name specified by TS 18661.
In one case with older compilers (f32x* macros, where the type
_Float64x exists and all the arguments have type _Float32 or
_Float32x), there is a further relaxation and the function called may
have arguments narrower than the one specified by the TS, but still
wide enough to represent the arguments exactly, so the result of the
call is unchanged (as this does not affect any case where rounding of
integer arguments might be involved). With GCC 6 or before this is
inherently unavoidable (but still harmless and not detectable by how
the compiled program behaves, unless it redefines the functions in
question like the testcases do) because _Float32x and _Float64 are
both typedefs for double in that case but the specified semantics
result in different functions, with different argument formats, being
called for those two argument types.
Tests for the new macros are handled through gen-tgmath-tests.py,
which deals with the special-case handling for older GCC.
Tested as follows: with the full glibc testsuite on x86_64 and x86
(with GCC 6, 7 and 8); with the math/ tests on aarch64 and arm (with
GCC 6, 7 and 8); with build-many-glibcs.py (with GCC 6, 7 and 9).
* math/tgmath.h [__HAVE_FLOAT128X]: Give error.
[(__HAVE_FLOAT64X && !__HAVE_FLOAT128)
|| (__HAVE_FLOAT128 && !__HAVE_FLOAT64X)]: Likewise.
(__TGMATH_2_NARROW_F): Likewise.
(__TGMATH_2_NARROW_D): New macro.
(__TGMATH_2_NARROW_F16): Likewise.
(__TGMATH_2_NARROW_F32): Likewise.
(__TGMATH_2_NARROW_F64): Likewise.
(__TGMATH_2_NARROW_F32X): Likewise.
(__TGMATH_2_NARROW_F64X): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F16): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F32): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F64): Likewise.
[__HAVE_BUILTIN_TGMATH] (__TGMATH_NARROW_FUNCS_F32X): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fadd): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (dadd): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fdiv): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (ddiv): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fmul): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (dmul): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (fsub): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT_C2X)] (dsub): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16add):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16div):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16mul):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT16] (f16sub):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32add):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32div):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32mul):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32] (f32sub):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64
&& (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64add): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64
&& (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64div): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64
&& (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64mul): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64
&& (__HAVE_FLOAT64X || __HAVE_FLOAT128)] (f64sub): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xadd):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xdiv):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xmul):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT32X] (f32xsub):
Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X
&& (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xadd): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X
&& (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xdiv): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X
&& (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xmul): Likewise.
[__GLIBC_USE (IEC_60559_TYPES_EXT) && __HAVE_FLOAT64X
&& (__HAVE_FLOAT128X || __HAVE_FLOAT128)] (f64xsub): Likewise.
* math/gen-tgmath-tests.py (Type): Add members
non_standard_real_argument_types_list, long_double_type,
complex_float64_type and float32x_ext_type.
(Type.__init__): Set the new members.
(Type.floating_type): Add new argument floatn.
(Type.real_floating_type): Likewise.
(Type.can_combine_types): Likewise.
(Type.combine_types): Likewise.
(Type.init_types): Create internal Float32x_ext type.
(Tests.__init__): Define Float32x_ext in generated C code.
(Tests.add_tests): Handle narrowing functions.
(Tests.add_all_tests): Likewise.
(Tests.tests_text): Allow variation in mant_dig for narrowing
functions with compilers before GCC 8.
* math/Makefile (tgmath3-narrow-types): New variable.
(tgmath3-narrow-macros): Likewise.
(tgmath3-macros): Add $(tgmath3-narrow-macros).
The resolution of C floating-point Clarification Request 25
<http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is
that the totalorder and totalordermag functions should take pointer
arguments, and this has been adopted in C2X (with const added; note
that the integration of this change into C2X is present in the C
standard git repository but postdates the most recent public PDF
draft).
This patch updates glibc accordingly. As a defect resolution, the API
is changed unconditionally rather than supporting any sort of TS
18661-1 mode for compilation with the old version of the API. There
are compat symbols for existing binaries that pass floating-point
arguments directly. As a consequence of changing to pointer
arguments, there are no longer type-generic macros in tgmath.h for
these functions.
Because of the fairly complicated logic for creating libm function
aliases and determining the set of aliases to create in a given glibc
configuration, rather than duplicating all that in individual source
files to create the versioned and compat symbols, the source files for
the various versions of totalorder functions are set up to redefine
weak_alias before using libm_alias_* macros to create the symbols
required. In turn, this requires creating a separate alias for each
symbol version pointing to the same implementation (see binutils bug
<https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is
done automatically using __COUNTER__. (As I noted in
<https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might
well make sense for glibc's symbol versioning macros to do that alias
creation with __COUNTER__ themselves, which would somewhat simplify
the logic in the totalorder source files.)
It is of course desirable to test the compat symbols. I did this with
the generic libm-test machinery, but didn't wish to duplicate the
actual tables of test inputs and outputs, and thought it risky to
attempt to have a single object file refer to both default and compat
versions of the same function in order to test them together. Thus, I
created libm-test-compat_totalorder.inc and
libm-test-compat_totalordermag.inc which include the generated .c
files (with the processed version of those tables of inputs) from the
non-compat tests, and added appropriate dependencies. I think this
provides sufficient test coverage for the compat symbols without also
needing to make the special ldbl-96 and ldbl-128ibm tests (of
peculiarities relating to the representations of those formats that
can't be covered in the generic tests) run for the compat symbols.
Tests of compat symbols need to be internal tests, meaning _ISOMAC is
not defined. Making some libm-test tests into internal tests showed
up two other issues. GCC diagnoses duplicate macro definitions of
__STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added
an appropriate conditional and filed
<https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue.
On ia64, include/setjmp.h ends up getting included indirectly from
libm-symbols.h, resulting in conflicting definitions of the STR macro
(also defined in libm-test-driver.c); I renamed the macros in
include/setjmp.h. (It's arguable that we should have common internal
headers used everywhere for stringizing and concatenation macros.)
Tested for x86_64 and x86, and with build-many-glibcs.py.
* math/bits/mathcalls.h
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalorder): Take pointer arguments.
[__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN]
(totalordermag): Likewise.
* manual/arith.texi (totalorder): Likewise.
(totalorderf): Likewise.
(totalorderl): Likewise.
(totalorderfN): Likewise.
(totalorderfNx): Likewise.
(totalordermag): Likewise.
(totalordermagf): Likewise.
(totalordermagl): Likewise.
(totalordermagfN): Likewise.
(totalordermagfNx): Likewise.
* math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise.
[__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise.
* math/Versions (GLIBC_2.31): Add totalorder, totalorderf,
totalorderl, totalordermag, totalordermagf, totalordermagl,
totalorderf32, totalorderf64, totalorderf32x, totalordermagf32,
totalordermagf64, totalordermagf32x, totalorderf64x,
totalordermagf64x, totalorderf128 and totalordermagf128.
* math/Makefile (libm-test-funcs-noauto): Add compat_totalorder
and compat_totalordermag.
(libm-test-funcs-compat): New variable.
(libm-tests-compat): Likewise.
(tests): Do not include compat tests.
(tests-internal): Add compat tests.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalorder.o)): Depend
on $(objpfx)libm-test-totalorder.c.
($(foreach t,$(libm-tests-base),
$(objpfx)$(t)-compat_totalordermag.o): Depend on
$(objpfx)libm-test-totalordermag.c.
(tgmath3-macros): Remove totalorder and totalordermag.
* math/libm-test-compat_totalorder.inc: New file.
* math/libm-test-compat_totalordermag.inc: Likewise.
* math/libm-test-driver.c (struct test_ff_i_data): Update comment.
(RUN_TEST_fpfp_b): New macro.
(RUN_TEST_LOOP_fpfp_b): Likewise.
* math/libm-test-totalorder.inc (totalorder_test_data): Use
TEST_fpfp_b.
(totalorder_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/libm-test-totalordermag.inc (totalordermag_test_data): Use
TEST_fpfp_b.
(totalordermag_test): Condition on [!COMPAT_TEST].
(do_test): Likewise.
* math/gen-tgmath-tests.py (Tests.add_all_tests): Remove
totalorder and totalordermag.
* math/test-tgmath.c (NCALLS): Change to 132.
(F(compile_test)): Do not call totalorder or totalordermag.
(F(totalorder)): Remove.
(F(totalordermag)): Likewise.
* include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not
define if [__STDC_WANT_IEC_60559_TYPES_EXT__].
* include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to
SJSTR_HELPER.
[!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER.
[!_ISOMAC] (TEST_SIZE): Update call to STR.
[!_ISOMAC] (TEST_ALIGN): Likewise.
[!_ISOMAC] (TEST_OFFSET): Likewise.
* sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorder): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermag): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/float128/float128_private.h
(__totalorder_compatl): New macro.
(__totalordermag_compatl): Likewise.
* sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h>
and <first-versions.h>.
(__totalorderf): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/flt-32/s_totalordermagf.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagf): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include
<shlib-compat.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include
<shlib-compat.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalorderl): Take pointer arguments. Add symbol versions and
compat symbols.
* sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include
<shlib-compat.h> and <first-versions.h>.
(__totalordermagl): Take pointer arguments. Add symbol versions
and compat symbols.
* sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take
pointer arguments.
* sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl):
Likewise.
* sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c
(do_test): Update calls to totalorderl and totalordermagl.
* sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test):
Update calls to totalorderl and totalordermagl.
* sysdeps/mach/hurd/i386/libm.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
This patch starts preparation for C2X support in glibc headers by
adding a feature test macro _ISOC2X_SOURCE and corresponding
__GLIBC_USE (ISOC2X). (I chose to use the newer __GLIBC_USE style for
this rather than the older __USE_* macros tested with #ifdef.) As
with other such macros, C2X features are also enabled by compiling for
a standard newer than C17, or by using _GNU_SOURCE.
This patch does not itself enable anything new in the headers for C2X;
that is to be done in followup patches. (For example, most of the TS
18661-1 functions should be declared for C2X without any
__STDC_WANT_IEC_60559_BFP_EXT__ being needed, but the ones that
18661-1 adds to Annex F because of their close relation to IEEE 754
formats do still need the WANT macro in C2X.)
Once C2X becomes an actual standard we'll presumably move to using the
actual year in the feature test macro and __GLIBC_USE, with some
period when both macro spellings are accepted, as was done with
_ISOC9X_SOURCE.
Tested for x86_64.
* include/features.h (_ISOC2X_SOURCE): New feature test macro.
Undefine and define to 1 if [_GNU_SOURCE].
(__GLIBC_USE_ISOC2X): New macro. Undefine and redefine depending
on [_ISOC2X_SOURCE] and [__STDC_VERSION__ > 201710L].
(__USE_ISOC11): Also define to 1 if [_ISOC2X_SOURCE].
(__USE_ISOC99): Likewise.
(__USE_ISOC95): Likewise.
* manual/creature.texi (_ISOC2X_SOURCE): Document.
The new IFUNC resolver call ABI was introduced in
commit 2b8a3c86e7
Commit: Szabolcs Nagy <szabolcs.nagy@arm.com>
CommitDate: 2019-07-04 11:13:32 +0100
aarch64: new ifunc resolver ABI
See the commit log and the comments in sys/ifunc.h for details.
This change should be fully backwards-compatible because the old
code aborted the load if a soname mismatch was encountered
(instead of searching further for a matching symbol). This means
that no different symbols are found.
The soname check was explicitly disabled for the skip_map != NULL
case. However, this only happens with dl(v)sym and RTLD_NEXT,
and those lookups do not come with a verneed entry that could be used
for the check.
The error check was already explicitly disabled for the skip_map !=
NULL case, that is, when dl(v)sym was called with RTLD_NEXT. But
_dl_vsym always sets filename in the struct r_found_version argument
to NULL, so the check was not active anyway. This means that
symbol lookup results for the skip_map != NULL case do not change,
either.
The kernel is evolving this interface (e.g., removal of the
restriction on cross-device copies), and keeping up with that
is difficult. Applications which need the function should
run kernels which support the system call instead of relying on
the imperfect glibc emulation.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Now that there are no internal users of __sysctl left, it is possible
to add an unconditional deprecation warning to <sys/sysctl.h>.
To avoid a test failure due this warning in check-install-headers,
skip the test for sys/sysctl.h.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
No 32-bit system call wrapper is added because the interface
is problematic because it cannot deal with 64-bit inode numbers
and 64-bit directory hashes.
A future commit will deprecate the undocumented getdirentries
and getdirentries64 functions.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Linux only supports the required ISA sysctls on StrongARM devices,
which are armv4 and no longer tested during glibc development
and probably bit-rotted by this point. (No reported test results,
and the last discussion of armv4 support was in the glibc 2.19
release notes.)
GCC 9 dropped support for the SPE extensions to PowerPC, which means
powerpc*-*-*gnuspe* configurations are no longer buildable with that
compiler. This ISA extension was peculiar to the “e500” line of
embedded PowerPC chips, which, as far as I can tell, are no longer
being manufactured, so I think we should follow suit.
This patch was developed by grepping for “e500”, “__SPE__”, and
“__NO_FPRS__”, and may not eliminate every vestige of SPE support.
Most uses of __NO_FPRS__ are left alone, as they are relevant to
normal embedded PowerPC with soft-float.
* sysdeps/powerpc/preconfigure: Error out on powerpc-*-*gnuspe*
host type.
* scripts/build-many-glibcs.py: Remove powerpc-*-linux-gnuspe
and powerpc-*-linux-gnuspe-e500v1 from list of build configurations.
* sysdeps/powerpc/powerpc32/e500: Recursively delete.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/e500: Recursively delete.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/context-e500.h:
Delete.
* sysdeps/powerpc/fpu_control.h: Remove SPE variant.
Issue an #error if used with a compiler in SPE-float mode.
* sysdeps/powerpc/powerpc32/__longjmp_common.S
* sysdeps/powerpc/powerpc32/setjmp_common.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/getcontext-common.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/getcontext.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/setcontext.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/swapcontext.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/setcontext-common.S
* sysdeps/unix/sysv/linux/powerpc/powerpc32/swapcontext-common.S:
Remove code to preserve SPE register state.
* sysdeps/unix/sysv/linux/powerpc/elision-lock.c
* sysdeps/unix/sysv/linux/powerpc/elision-trylock.c
* sysdeps/unix/sysv/linux/powerpc/elision-unlock.c
Remove __SPE__ ifndefs.
The tgkill function is sometimes used in crash handlers.
<bits/signal_ext.h> follows the same approach as <bits/unistd_ext.h>
(which was added for the gettid system call wrapper).
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Unicode 12.1.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 12.1.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Some info about the number of characters added or changed:
Total added characters in newly generated CHARMAP: 1
added: <U32FF> /xe3/x8b/xbf SQUARE ERA NAME REIWA
Total added characters in newly generated WIDTH: 1
added: <U32FF> 2 : eaw=W category=So bidi=L name=SQUARE ERA NAME REIWA
graph: Added 1 characters in new ctype which were not in old ctype
graph: Added: ㋿ U+32FF SQUARE ERA NAME REIWA
print: Added 1 characters in new ctype which were not in old ctype
print: Added: ㋿ U+32FF SQUARE ERA NAME REIWA
punct: Added 1 characters in new ctype which were not in old ctype
punct: Added: ㋿ U+32FF SQUARE ERA NAME REIWA
The twalk function is very difficult to use in a multi-threaded
program because there is no way to pass external state to the
iterator function.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Commit 2d6ab5df3b ("Document and fix
--enable-bind-now [BZ #21015]") extended BIND_NOW to all installed
shared objects. This change also covers installed programs.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
As discussed previously on libc-alpha [1], this patch follows up the idea
and add both the __attribute_alloc_size__ on malloc functions (malloc,
calloc, realloc, reallocarray, valloc, pvalloc, and memalign) and limit
maximum requested allocation size to up PTRDIFF_MAX (taking into
consideration internal padding and alignment).
This aligns glibc with gcc expected size defined by default warning
-Walloc-size-larger-than value which warns for allocation larger than
PTRDIFF_MAX. It also aligns with gcc expectation regarding libc and
expected size, such as described in PR#67999 [2] and previously discussed
ISO C11 issues [3] on libc-alpha.
From the RFC thread [4] and previous discussion, it seems that consensus
is only to limit such requested size for malloc functions, not the system
allocation one (mmap, sbrk, etc.).
The implementation changes checked_request2size to check for both overflow
and maximum object size up to PTRDIFF_MAX. No additional checks are done
on sysmalloc, so it can still issue mmap with values larger than
PTRDIFF_T depending on the requested size.
The __attribute_alloc_size__ is for functions that return a pointer only,
which means it cannot be applied to posix_memalign (see remarks in GCC
PR#87683 [5]). The runtimes checks to limit maximum requested allocation
size does applies to posix_memalign.
Checked on x86_64-linux-gnu and i686-linux-gnu.
[1] https://sourceware.org/ml/libc-alpha/2018-11/msg00223.html
[2] https://gcc.gnu.org/bugzilla//show_bug.cgi?id=67999
[3] https://sourceware.org/ml/libc-alpha/2011-12/msg00066.html
[4] https://sourceware.org/ml/libc-alpha/2018-11/msg00224.html
[5] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=87683
[BZ #23741]
* malloc/hooks.c (malloc_check, realloc_check): Use
__builtin_add_overflow on overflow check and adapt to
checked_request2size change.
* malloc/malloc.c (__libc_malloc, __libc_realloc, _mid_memalign,
__libc_pvalloc, __libc_calloc, _int_memalign): Limit maximum
allocation size to PTRDIFF_MAX.
(REQUEST_OUT_OF_RANGE): Remove macro.
(checked_request2size): Change to inline function and limit maximum
requested size to PTRDIFF_MAX.
(__libc_malloc, __libc_realloc, _int_malloc, _int_memalign): Limit
maximum allocation size to PTRDIFF_MAX.
(_mid_memalign): Use _int_memalign call for overflow check.
(__libc_pvalloc): Use __builtin_add_overflow on overflow check.
(__libc_calloc): Use __builtin_mul_overflow for overflow check and
limit maximum requested size to PTRDIFF_MAX.
* malloc/malloc.h (malloc, calloc, realloc, reallocarray, memalign,
valloc, pvalloc): Add __attribute_alloc_size__.
* stdlib/stdlib.h (malloc, realloc, reallocarray, valloc): Likewise.
* malloc/tst-malloc-too-large.c (do_test): Add check for allocation
larger than PTRDIFF_MAX.
* malloc/tst-memalign.c (do_test): Disable -Walloc-size-larger-than=
around tests of malloc with negative sizes.
* malloc/tst-posix_memalign.c (do_test): Likewise.
* malloc/tst-pvalloc.c (do_test): Likewise.
* malloc/tst-valloc.c (do_test): Likewise.
* malloc/tst-reallocarray.c (do_test): Replace call to reallocarray
with resulting size allocation larger than PTRDIFF_MAX with
reallocarray_nowarn.
(reallocarray_nowarn): New function.
* NEWS: Mention the malloc function semantic change.
This functionality was deprecated in glibc 2.25.
This commit only includes the core changes to remove the
functionality. It does not remove the RES_USE_INET6 handling in the
individual NSS service modules and the res_use_inet6 function.
These changes will happen in future commits.
The Japanese era name will be changed on May 1, 2019. The Japanese
government made a preliminary announcement on April 1, 2019.
The glibc ja_JP locale must be updated to include the new era name for
strftime's alternative year format support.
Checked on x86_64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
ChangeLog:
[BZ #22964]
* localedata/locales/ja_JP (LC_TIME): Add entry for the new Japanese
era.
* time/tst-strftime2.c (dates): Add 2019-04-30 and 2019-05-01.
(mkreftable): Add rules for the new Japanese era and the new dates.
The stub implementations are turned into compat symbols.
Linux actually has two reserved system call numbers (for getpmsg
and putpmsg), but these system calls have never been implemented,
and there are no plans to implement them, so this patch replaces
the wrappers with the generic stubs.
According to <https://bugzilla.redhat.com/show_bug.cgi?id=436349>,
the presence of the XSI STREAMS declarations is a minor portability
hazard because they are not actually implemented.
This commit does not change the TIRPC support code in
sunrpc/rpc_svcout.c. It uses additional XTI functionality and
therefore never worked with glibc.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Unicode 12.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 12.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Some info about the number of characters added or changed:
Total added characters in newly generated CHARMAP: 554
Total added characters in newly generated WIDTH: 106
alpha: Missing 8 characters of old ctype in new ctype
(These are combining marks, apparently they were removed from alpha
on purpose)
alpha: Added 295 characters in new ctype which were not in old ctype
combining: Missing 2 characters of old ctype in new ctype
(U+1CF2 VEDIC SIGN ARDHAVISARGA and U+1CF3 VEDIC SIGN ROTATED ARDHAVISARGA,
these are now "Alphabetic" in Unicode 12.0.0)
combining: Added 37 characters in new ctype which were not in old ctype
combining_level3: Missing 2 characters of old ctype in new ctype
(U+1CF2 VEDIC SIGN ARDHAVISARGA and U+1CF3 VEDIC SIGN ROTATED ARDHAVISARGA,
these are now "Alphabetic" in Unicode 12.0.0)
combining_level3: Added 26 characters in new ctype which were not in old ctype
graph: Added 554 characters in new ctype which were not in old ctype
lower: Added 6 characters in new ctype which were not in old ctype
print: Added 554 characters in new ctype which were not in old ctype
punct: Missing 29 characters of old ctype in new ctype
(These characters have all become "Alphabetic" in Unicode 12.0.0.
Therefore, they are not in "punct" anymore (see: is_punct() in unicode_utils.py))
punct: Added 296 characters in new ctype which were not in old ctype
tolower: Added 7 characters in new ctype which were not in old ctype
totitle: Added 7 characters in new ctype which were not in old ctype
toupper: Added 7 characters in new ctype which were not in old ctype
upper: Added 7 characters in new ctype which were not in old ctype
[BZ #24307]
* localedata/unicode-gen/Makefile (UNICODE_VERSION): Set to 12.0.0.
* localedata/unicode-gen/DerivedCoreProperties.txt: Update to Unicode 12.0.0.
* localedata/unicode-gen/EastAsianWidth.txt: Likewise.
* localedata/unicode-gen/PropList.txt: Likewise.
* localedata/unicode-gen/UnicodeData.txt: Likewise.
* localedata/unicode-gen/ctype_compatibility_test_cases.py: U+108D became
"Alphabetic" in Unicode 12.0.0. Adapt test case.
* localedata/charmaps/UTF-8: Regenerate.
* localedata/locales/i18n_ctype: Likewise.
* localedata/locales/tr_TR: Likewise.
* localedata/locales/translit_circle: Likewise.
* localedata/locales/translit_cjk_compat: Likewise.
* localedata/locales/translit_combining: Likewise.
* localedata/locales/translit_compat: Likewise.
* localedata/locales/translit_font: Likewise.
* localedata/locales/translit_fraction: Likewise.
This commit adds gettid to <unistd.h> on Linux, and not to the
kernel-independent GNU API.
gettid is now supportable on Linux because too many things assume a
1:1 mapping between libpthread threads and kernel threads.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
As the result of commit 6e6249d0b4
("BZ#14743: Move clock_* symbols from librt to libc."), in glibc 2.17,
clock_gettime, clock_getres, clock_settime, clock_getcpuclockid,
clock_nanosleep were added to libc, and the file rt/clock-compat.c
was added with forwarders to the actual implementations in libc.
These forwarders were wrapped in
#if SHLIB_COMPAT (librt, GLIBC_2_2, GLIBC_2_17)
so that they are not present for newer architectures (such as
powerpc64le) with a 2.17 or later ABI baseline. But the forwarders
were not marked as compatibility symbols. As a result, on older
architectures, historic configure checks such as
AC_CHECK_LIB(rt, clock_gettime)
still cause linking against librt, even though this is completely
unnecessary. It also creates a needless porting hazard because
architectures behave differently when it comes to symbol availability.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Since the size argument is unsigned. we should use unsigned Jcc
instructions, instead of signed, to check size.
Tested on x86-64 and x32, with and without --disable-multi-arch.
[BZ #24155]
CVE-2019-7309
* NEWS: Updated for CVE-2019-7309.
* sysdeps/x86_64/memcmp.S: Use RDX_LP for size. Clear the
upper 32 bits of RDX register for x32. Use unsigned Jcc
instructions, instead of signed.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-memcmp-2.
* sysdeps/x86_64/x32/tst-size_t-memcmp-2.c: New test.
As discussed during development for glibc 2.29, when we increased the
required minimum GCC version for building glibc to GCC 5, working
purely based on the times at which such requirements have been
increased in the past it would be appropriate for glibc 2.30 to
require GCC 6 (matching GCC 4.9 having been required for glibc 2.26).
Naming 6.2 specifically as the minimum version then means a separate
version requirement no longer needs to be specified for powerpc64le.
Thus, this patch increases the minimum to 6.2, removing the
documentation of the separate requirement for powerpc64le. It does
not remove the powerpc64le configure test, or any __GNUC_PREREQ that
could be removed as not being in installed headers or files shared
with gnulib; I think such cleanups are best done separately.
Tested for x86_64.
* configure.ac (libc_cv_compiler_ok): Require GCC 6.2 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Update minimum GCC
version.
* INSTALL: Regenerated.
* NEWS: Add the list of bugs fixed in 2.29.
* manual/contrib.texi: Update contributors list with some more
names.
* manual/install.texi: Update latest versions of packages
tested.
* INSTALL: Regenerated.
The full representation of the alternative calendar year (%EY)
typically includes an internal use of "%Ey". As a GNU extension,
apply any flags on "%EY" (e.g. "%_EY", "%-EY") to the internal "%Ey",
allowing users of "%EY" to control how the year is padded.
Reviewed-by: Rafal Luzynski <digitalfreak@lingonborough.com>
Reviewed-by: Zack Weinberg <zackw@panix.com>
ChangeLog:
[BZ #24096]
* manual/time.texi (strftime): Document "%EC" and "%EY".
* time/Makefile (tests): Add tst-strftime2.
(LOCALES): Add ja_JP.UTF-8, lo_LA.UTF-8, and th_TH.UTF-8.
* time/strftime_l.c (__strftime_internal): Add argument yr_spec to
override padding for "%Ey".
If an optional flag ('_' or '-') is specified to "%EY", interpret the
"%Ey" in the subformat as if decorated with that flag.
* time/tst-strftime2.c: New file.
In Japanese locales, strftime's alternative year format (%Ey) produces
a year numbered within a time period called an _era_. A new era
typically begins when a new emperor is enthroned. The result of "%Ey"
is therefore usually a one- or two-digit number.
Many programs that display Japanese era dates assume that the era year
is two digits wide. To improve how these programs display dates
during the first nine years of a new era, change "%Ey" to pad one-
digit numbers on the left with a zero. This change applies to all
locales. It is expected to be harmless for other locales that use the
alternative year format (e.g. lo_LA and th_TH, in which "%Ey" produces
the year of the Buddhist calendar) as those calendars' year numbers
are already more than two digits wide, and this is not expected to
change.
This change needs to be in place before 2019-05-01 CE, as a new era is
scheduled to begin on that date.
Reviewed-by: Zack Weinberg <zackw@panix.com>
Reviewed-by: Rafal Luzynski <digitalfreak@lingonborough.com>
ChangeLog:
[BZ #23758]
* manual/time.texi (strftime): Document "%Ey".
* time/strftime_l.c (__strftime_internal): Set the default width
padding with zero of "%Ey" to 2.
The IPv4 address parser in the getaddrinfo function is changed so that
it does not ignore trailing whitespace and all characters after it.
For backwards compatibility, the getaddrinfo function still recognizes
legacy name syntax, such as 192.000.002.010 interpreted as 192.0.2.8
(octal).
This commit does not change the behavior of inet_addr and inet_aton.
gethostbyname already had additional sanity checks (but is switched
over to the new __inet_aton_exact function for completeness as well).
To avoid sending the problematic query names over DNS, commit
6ca53a2453 ("resolv: Do not send queries
for non-host-names in nss_dns [BZ #24112]") is needed.
On x32, the size_t parameter may be passed in the lower 32 bits of a
64-bit register with the non-zero upper 32 bits. The string/memory
functions written in assembly can only use the lower 32 bits of a
64-bit register as length or must clear the upper 32 bits before using
the full 64-bit register for length.
This pach fixes memchr/wmemchr for x32. Tested on x86-64 and x32. On
x86-64, libc.so is the same with and withou the fix.
[BZ# 24097]
CVE-2019-6488
* sysdeps/x86_64/memchr.S: Use RDX_LP for length. Clear the
upper 32 bits of RDX register.
* sysdeps/x86_64/multiarch/memchr-avx2.S: Likewise.
* sysdeps/x86_64/x32/Makefile (tests): Add tst-size_t-memchr and
tst-size_t-wmemchr.
* sysdeps/x86_64/x32/test-size_t.h: New file.
* sysdeps/x86_64/x32/tst-size_t-memchr.c: Likewise.
* sysdeps/x86_64/x32/tst-size_t-wmemchr.c: Likewise.
The only difference between noncompliant and C99-compliant scanf is
that the former accepts the archaic GNU extension '%as' (also %aS and
%a[...]) meaning to allocate space for the input string with malloc.
This extension conflicts with C99's use of %a as a format _type_
meaning to read a floating-point number; POSIX.1-2008 standardized
equivalent functionality using the modifier letter 'm' instead (%ms,
%mS, %m[...]).
The extension was already disabled in most conformance modes:
specifically, any mode that doesn't involve _GNU_SOURCE and _does_
involve either strict conformance to C99 or loose conformance to both
C99 and POSIX.1-2001 would get the C99-compliant scanf. With
compilers new enough to use -std=gnu11 instead of -std=gnu89, or
equivalent, that includes the default mode.
With this patch, we now provide C99-compliant scanf in all
configurations except when _GNU_SOURCE is defined *and*
__STDC_VERSION__ or __cplusplus (whichever is relevant) indicates
C89/C++98. This leaves the old scanf available under e.g. -std=c89
-D_GNU_SOURCE, but removes it from e.g. -std=gnu11 -D_GNU_SOURCE (it
was already not present under -std=gnu11 without -D_GNU_SOURCE) and
from -std=gnu89 without -D_GNU_SOURCE.
There needs to be an internal override so we can compile the
noncompliant scanf itself. This is the same problem we had when we
removed 'gets' from _GNU_SOURCE and it's dealt with the same way:
there's a new __GLIBC_USE symbol, DEPRECATED_SCANF, which defaults to
off under the appropriate conditions for external code, but can be
overridden by individual files within stdio.
We also run into problems with PLT bypass for internal uses of sscanf,
because libc_hidden_proto uses __REDIRECT and so does the logic in
stdio.h for choosing which implementation of scanf to use; __REDIRECT
isn't transitive, so include/stdio.h needs to bridge the gap with a
macro. As far as I can tell, sscanf is the only function in this
family that's internally called by unrelated code.
Finally, there are several tests in stdio-common that use the
extension. bug21.c is a regression test for a crash; it still
exercises the relevant code when changed to use %ms instead of %as.
scanf14.c through scanf17.c are more complicated since they are
actually testing the subtleties of the extension - under what
circumstances is 'a' treated as a modifier letter, etc. I changed all
of them to use %ms instead of %as as well, but duplicated scanf14.c
and scanf16.c as scanf14a.c and scanf16a.c. These still use %as and
are compiled with -std=gnu89 to access the old extension. A bunch of
diagnostic overrides and manual workarounds for the old stdio.h
behavior become unnecessary. Yay!
* include/features.h (__GLIBC_USE_DEPRECATED_SCANF): New __GLIBC_USE
parameter. Only use deprecated scanf when __USE_GNU is defined
and __STDC_VERSION__ is less than 199901L or __cplusplus is less
than 201103L, whichever is relevant for the language being compiled.
* libio/stdio.h, libio/bits/stdio-ldbl.h: Decide whether to redirect
scanf, fscanf, sscanf, vscanf, vfscanf, and vsscanf to their
__isoc99_ variants based only on __GLIBC_USE (DEPRECATED_SCANF).
* wcsmbs/wchar.h: wcsmbs/bits/wchar-ldbl.h: Likewise for
wscanf, fwscanf, swscanf, vwscanf, vfwscanf, and vswscanf.
* libio/iovsscanf.c
* libio/fwscanf.c
* libio/iovswscanf.c
* libio/swscanf.c
* libio/vscanf.c
* libio/vwscanf.c
* libio/wscanf.c
* stdio-common/fscanf.c
* stdio-common/scanf.c
* stdio-common/vfscanf.c
* stdio-common/vfwscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-compat.c
* sysdeps/ieee754/ldbl-opt/nldbl-fscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-fwscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-iovfscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-scanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-sscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-swscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-vfscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-vfwscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-vscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-vsscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-vswscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-vwscanf.c
* sysdeps/ieee754/ldbl-opt/nldbl-wscanf.c:
Override __GLIBC_USE_DEPRECATED_SCANF to 1.
* stdio-common/sscanf.c: Likewise. Remove ldbl_hidden_def for __sscanf.
* stdio-common/isoc99_sscanf.c: Add libc_hidden_def for __isoc99_sscanf.
* include/stdio.h: Provide libc_hidden_proto for __isoc99_sscanf,
not sscanf.
[!__GLIBC_USE (DEPRECATED_SCANF)]: Define sscanf as __isoc99_scanf
with a preprocessor macro.
* stdio-common/bug21.c, stdio-common/scanf14.c:
Use %ms instead of %as, %mS instead of %aS, %m[] instead of %a[];
remove DIAG_IGNORE_NEEDS_COMMENT for -Wformat.
* stdio-common/scanf16.c: Likewise. Add __attribute__ ((format (scanf)))
to xscanf, xfscanf, xsscanf.
* stdio-common/scanf14a.c: New copy of scanf14.c which still uses
%as, %aS, %a[]. Remove DIAG_IGNORE_NEEDS_COMMENT for -Wformat.
* stdio-common/scanf16a.c: New copy of scanf16.c which still uses
%as, %aS, %a[]. Add __attribute__ ((format (scanf))) to xscanf,
xfscanf, xsscanf.
* stdio-common/scanf15.c, stdio-common/scanf17.c: No need to
override feature selection macros or provide definitions of u_char etc.
* stdio-common/Makefile (tests): Add scanf14a and scanf16a.
(CFLAGS-scanf15.c, CFLAGS-scanf17.c): Remove.
(CFLAGS-scanf14a.c, CFLAGS-scanf16a.c): New. Compile these files
with -std=gnu89.
We know that building glibc with GCC 4.9 is broken on various
platforms (bug 23993). As it's more than a year since we last
increased the minimum GCC version to build glibc, this patch changes
the requirement to be GCC 5 or later (indeed, based on 4.9 having been
required for building 2.26, it would be consistent in terms of timing
to require GCC 6 or later from the 2.30 release onwards). It
deliberately just updates the configure test and corresponding
documentation, leaving removal of no-longer-needed __GNUC_PREREQ tests
for a separate patch.
In the NEWS entry, the requirement for a newer GCC version for
powerpc64le is reiterated (as in the entry for the 4.9 requirement in
2.26) to avoid suggesting the version requirement there has gone down.
(If that version goes up further as part of support for binary128 long
double, of course the wording would change at that time.)
Tested for x86_64.
[BZ #23993]
* configure.ac (libc_cv_compiler_ok): Require GCC 5 or later.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Update minimum GCC
version.
* INSTALL: Regenerated.
Along with posix_spawn_file_actions_addchdir,
posix_spawn_file_actions_addfchdir is the subject of a change proposal
for POSIX: <http://austingroupbugs.net/view.php?id=1208>
This patch uses posix_spawn on popen instead of fork and execl. On Linux
this has the advantage of much lower memory consumption (usually 32 Kb
minimum for the mmap stack area).
Two issues are also fixed with this change:
* BZ#17490: although POSIX pthread_atfork description only list 'fork'
as the function that should execute the atfork handlers, popen
description states that:
'[...] shall be *as if* a child process were created within the popen()
call using the fork() function [...]'
Other libc/system seems to follow the idea atfork handlers should not be
executed for popen:
libc/system | run atfork handles | notes
------------|----------------------|---------------------------------------
Freebsd | no | uses vfork
Solaris 11 | no |
MacOSX 11 | no | implemented through posix_spawn syscall
------------|----------------------|----------------------------------------
Similar to posix_spawn and system, popen idea is to spawn a different
binary so all the POSIX rationale to run the atfork handlers to avoid
internal process inconsistency is not really required and in some cases
might be unsafe.
* BZ#22834: the described scenario, where the forked process might access
invalid memory due an inconsistent state in multithreaded environment,
should not happen because posix_spawn does not access the affected
data structure (proc_file_chain).
Checked on x86_64-linux-gnu and i686-linux-gnu.
[BZ #22834]
[BZ #17490]
* NEWS: Add new semantic for atfork with popen and system.
* libio/iopopen.c (_IO_new_proc_open): use posix_spawn instead of
fork and execl.
This patch makes Python 3.4 or later a required tool for building
glibc, so allowing changes of awk, perl etc. code used in the build
and test to Python code without any such changes needing makefile
conditionals or to handle older Python versions.
This patch makes the configure test for Python check the version and
give an error if Python is missing or too old, and removes makefile
conditionals that are no longer needed. It does not itself convert
any code from another language to Python, and does not remove any
compatibility with older Python versions from existing scripts.
Tested for x86_64.
* configure.ac (PYTHON_PROG): Use AC_CHECK_PROG_VER. Set
critic_missing for versions before 3.4.
* configure: Regenerated.
* manual/install.texi (Tools for Compilation): Document
requirement for Python to build glibc.
* INSTALL: Regenerated.
* Rules [PYTHON]: Make code unconditional.
* benchtests/Makefile [PYTHON]: Likewise.
* conform/Makefile [PYTHON]: Likewise.
* manual/Makefile [PYTHON]: Likewise.
* math/Makefile [PYTHON]: Likewise.
This patch extends gen-libm-test.py to generate the ulps table for the
manual, so meaning there is only a single ulps file parser needed and
another Perl script is eliminated. As with the introduction of
gen-libm-test.py, this is designed to generate exactly the same
libm-err.texi as libm-err-tab.pl did. (gen-libm-test.py is still
shorter in lines than the old gen-libm-test.pl even after this patch.)
Note that this introduces a Python dependency for building the manual,
which is thus noted in install.texi and NEWS.
Tested building html / info / pdf versions of the manual.
* math/gen-libm-test.py: Import os.
(ALL_FLOATS_MANUAL): New constant.
(ALL_FLOATS_SUFFIX): Likewise.
(Ulps.all_functions): New function.
(real_all_ulps): Likewise.
(generate_err_table_sub): Likewise.
(generate_err_table): Likewise.
(main): Handle -s and -m options.
* manual/libm-err-tab.pl: Remove.
* manual/Makefile ($(objpfx)stamp-libm-err): Use gen-libm-test.py
instead of libm-err-tab.pl.
[$(PERL) != no]: Change condition to [$(if $(PYTHON),$(PERL),no)
!= no].
* manual/install.texi (Tools for Compilation): Document
requirement for Python to build manual.
* INSTALL: Regenerated.
Linux from 3.9 through 4.2 does not abort HTM transaction on syscalls,
instead it suspend and resume it when leaving the kernel. The
side-effects of the syscall will always remain visible, even if the
transaction is aborted. This is an issue when transaction is used along
with futex syscall, on pthread_cond_wait for instance, where the futex
call might succeed but the transaction is rolled back leading the
pthread_cond object in an inconsistent state.
Glibc used to prevent it by always aborting a transaction before issuing
a syscall. Linux 4.2 also decided to abort active transaction in
syscalls which makes the glibc workaround superfluous. Worse, glibc
transaction abortion leads to a performance issue on recent kernels
where the HTM state is saved/restore lazily (v4.9). By aborting a
transaction on every syscalls, regardless whether a transaction has being
initiated before, GLIBS makes the kernel always save/restore HTM state
(it can not even lazily disable it after a certain number of syscall
iterations).
Because of this shortcoming, Transactional Lock Elision is just enabled
when it has been explicitly set (either by tunables of by a configure
switch) and if kernel aborts HTM transactions on syscalls
(PPC_FEATURE2_HTM_NOSC). It is reported that using simple benchmark [1],
the context-switch is about 5% faster by not issuing a tabort in every
syscall in newer kernels.
Checked on powerpc64le-linux-gnu with 4.4.0 kernel (Ubuntu 16.04).
* NEWS: Add note about new TLE support on powerpc64le.
* sysdeps/powerpc/nptl/tcb-offsets.sym (TM_CAPABLE): Remove.
* sysdeps/powerpc/nptl/tls.h (tcbhead_t): Rename tm_capable to
__ununsed1.
(TLS_INIT_TP, TLS_DEFINE_INIT_TP): Remove tm_capable setup.
(THREAD_GET_TM_CAPABLE, THREAD_SET_TM_CAPABLE): Remove macros.
* sysdeps/powerpc/powerpc32/sysdep.h,
sysdeps/powerpc/powerpc64/sysdep.h (ABORT_TRANSACTION_IMPL,
ABORT_TRANSACTION): Remove macros.
* sysdeps/powerpc/sysdep.h (ABORT_TRANSACTION): Likewise.
* sysdeps/unix/sysv/linux/powerpc/elision-conf.c (elision_init): Set
__pthread_force_elision iff PPC_FEATURE2_HTM_NOSC is set.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h,
sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h
sysdeps/unix/sysv/linux/powerpc/syscall.S (ABORT_TRANSACTION): Remove
usage.
* sysdeps/unix/sysv/linux/powerpc/not-errno.h: Remove file.
Reported-by: Breno Leitão <leitao@debian.org>
The algorithm is exp(y * log(x)), where log(x) is computed with about
1.3*2^-68 relative error (1.5*2^-68 without fma), returning the result
in two doubles, and the exp part uses the same algorithm (and lookup
tables) as exp, but takes the input as two doubles and a sign (to handle
negative bases with odd integer exponent). The __exp1 internal symbol
is no longer necessary.
There is separate code path when fma is not available but the worst case
error is about 0.54 ULP in both cases. The lookup table and consts for
log are 4168 bytes. The .rodata+.text is decreased by 37908 bytes on
aarch64. The non-nearest rounding error is less than 1 ULP.
Improvements on Cortex-A72 compared to current glibc master:
pow thruput: 2.40x in [0.01 11.1]x[0.01 11.1]
pow latency: 1.84x in [0.01 11.1]x[0.01 11.1]
Tested on
aarch64-linux-gnu (defined __FP_FAST_FMA, TOINT_INTRINSICS) and
arm-linux-gnueabihf (!defined __FP_FAST_FMA, !TOINT_INTRINSICS) and
x86_64-linux-gnu (!defined __FP_FAST_FMA, !TOINT_INTRINSICS) and
powerpc64le-linux-gnu (defined __FP_FAST_FMA, !TOINT_INTRINSICS) targets.
* NEWS: Mention pow improvements.
* math/Makefile (type-double-routines): Add e_pow_log_data.
* sysdeps/generic/math_private.h (__exp1): Remove.
* sysdeps/i386/fpu/e_pow_log_data.c: New file.
* sysdeps/ia64/fpu/e_pow_log_data.c: New file.
* sysdeps/ieee754/dbl-64/Makefile (CFLAGS-e_pow.c): Allow fma
contraction.
* sysdeps/ieee754/dbl-64/e_exp.c (__exp1): Remove.
(exp_inline): Remove.
(__ieee754_exp): Only single double input is handled.
* sysdeps/ieee754/dbl-64/e_pow.c: Rewrite.
* sysdeps/ieee754/dbl-64/e_pow_log_data.c: New file.
* sysdeps/ieee754/dbl-64/math_config.h (issignaling_inline): Define.
(__pow_log_data): Define.
* sysdeps/ieee754/dbl-64/upow.h: Remove.
* sysdeps/ieee754/dbl-64/upow.tbl: Remove.
* sysdeps/m68k/m680x0/fpu/e_pow_log_data.c: New file.
* sysdeps/x86_64/fpu/multiarch/Makefile (CFLAGS-e_pow-fma.c): Allow fma
contraction.
(CFLAGS-e_pow-fma4.c): Likewise.
As discussed at
<https://sourceware.org/ml/libc-alpha/2018-09/msg00191.html> and
followup discussions, the MIPS n32 definitions of pr_sigpend and
pr_sighold in struct elf_prstatus, and pr_flag in struct elf_prpsinfo,
are wrong to use unsigned long long int; actual n32 core dumps use a
32-bit type there, so userspace unsigned long int is correct for all
MIPS ABIs. This patch removes the conditionals (also thereby aligning
the structures with other architectures and so facilitating future
unification of different versions of this header).
Tested with build-many-glibcs.py for its MIPS configurations.
[BZ #23656]
* sysdeps/unix/sysv/linux/mips/sys/procfs.h (struct elf_prstatus):
Remove [_MIPS_SIM = _ABIN32] conditional case.
(struct elf_prpsinfo): Likewise.
As noted in
<https://sourceware.org/ml/libc-alpha/2018-09/msg00178.html>, glibc's
sys/procfs.h headers for microblaze, mips (n64), nios2 and riscv have
incorrect types for the pr_uid and pr_gid members of struct
elf_prpsinfo (as does the generic Linux version, but nothing uses
that).
This patch fixes those headers to use unsigned int. The generic Linux
version is also fixed, but I do *not* recommend making new
architectures use it yet. Rather, I think it should be reworked to
look more like a copy of the AArch64 version, but with a new
<bits/procfs.h> header included to provide register set definitions;
<bits/procfs.h> would then be architecture-specific while many
architectures could use the generic <sys/procfs.h>. This fix is
deliberately separate from any reworking to use a generic header more,
since it's possible there could be uses for backporting this fix but
not for backporting a subsequent cleanup.
Tested with build-many-glibcs.py. This of course doesn't provide much
validation of the structure layout; if the Linux kernel is fixed so
that "#include <linux/elfcore.h>" actually compiles with the headers
from "make headers_install" (and if the layout in both headers is
meant to be the same, whatever ABI we are building for), I have a test
that can be added to glibc to check the layout against that from the
Linux kernel.
[BZ #23649]
* sysdeps/unix/sysv/linux/microblaze/sys/procfs.h (struct
elf_prpsinfo): Use unsigned int for pr_uid and pr_gid.
* sysdeps/unix/sysv/linux/mips/sys/procfs.h (struct elf_prpsinfo):
Likewise.
* sysdeps/unix/sysv/linux/nios2/sys/procfs.h (struct
elf_prpsinfo): Likewise.
* sysdeps/unix/sysv/linux/riscv/sys/procfs.h (struct
elf_prpsinfo): Likewise.
* sysdeps/unix/sysv/linux/sys/procfs.h (struct elf_prpsinfo):
Likewise.
Similar algorithm is used as in log: log2(2^k x) = k + log2(c) + log2(x/c)
where the last term is approximated by a polynomial of x/c - 1, the first
order coefficient is about 1/ln2 in this case.
There is separate code path when fma instruction is not available for
computing x/c - 1 precisely, for which the table size is doubled.
The worst case error is 0.547 ULP (0.55 without fma), the read only
global data size is 1168 bytes (2192 without fma) on aarch64. The
non-nearest rounding error is less than 1 ULP.
Improvements on Cortex-A72 compared to current glibc master:
log2 thruput: 2.00x in [0.01 11.1]
log2 latency: 2.04x in [0.01 11.1]
log2 thruput: 2.17x in [0.999 1.001]
log2 latency: 2.88x in [0.999 1.001]
Tested on
aarch64-linux-gnu (defined __FP_FAST_FMA)
arm-linux-gnueabihf (!defined __FP_FAST_FMA)
x86_64-linux-gnu (!defined __FP_FAST_FMA)
powerpc64le-linxu-gnu (defined __FP_FAST_FMA)
targets.
* NEWS: Mention log2 improvements.
* math/Makefile (type-double-routines): Add e_log2_data.
* sysdeps/i386/fpu/e_log2_data.c: New file.
* sysdeps/ia64/fpu/e_log2_data.c: New file.
* sysdeps/ieee754/dbl-64/e_log2.c: Rewrite.
* sysdeps/ieee754/dbl-64/e_log2_data.c: New file.
* sysdeps/ieee754/dbl-64/math_config.h (__log2_data): Add.
* sysdeps/ieee754/dbl-64/wordsize-64/e_log2.c: Remove.
* sysdeps/m68k/m680x0/fpu/e_log2_data.c: New file.
Optimized log using carefully generated lookup table with 1/c and log(c)
values for small intervalls around 1. The log(c) is very near a double
precision value, it has about 62 bits precision. The algorithm is
log(2^k x) = k log(2) + log(c) + log(x/c), where the last term is
approximated by a polynomial of x/c - 1. Near 1 a single polynomial of
x - 1 is used.
There is separate code path when fma instruction is not available for
computing x/c - 1 precisely, in which case the table size is doubled.
The code uses __builtin_fma under __FP_FAST_FMA to ensure it is inlined
as an instruction.
With the default configuration settings the worst case error is 0.519 ULP
(and 0.520 without fma), the rodata size is 2192 bytes (4240 without fma).
The non-nearest rounding error is less than 1 ULP.
Improvements on Cortex-A72 compared to current glibc master:
log thruput: 3.28x in [0.01 11.1]
log latency: 2.23x in [0.01 11.1]
log thruput: 1.56x in [0.999 1.001]
log latency: 1.57x in [0.999 1.001]
Tested on
aarch64-linux-gnu (defined __FP_FAST_FMA)
arm-linux-gnueabihf (!defined __FP_FAST_FMA)
x86_64-linux-gnu (!defined __FP_FAST_FMA)
powerpc64le-linux-gnu (defined __FP_FAST_FMA)
targets.
* NEWS: Mention log improvement.
* math/Makefile (type-double-routines): Add e_log_data.
* sysdeps/i386/fpu/e_log_data.c: New file.
* sysdeps/ia64/fpu/e_log_data.c: New file.
* sysdeps/ieee754/dbl-64/e_log.c: Rewrite.
* sysdeps/ieee754/dbl-64/e_log_data.c: New file.
* sysdeps/ieee754/dbl-64/math_config.h (__log_data): Add.
* sysdeps/ieee754/dbl-64/ulog.h: Remove.
* sysdeps/ieee754/dbl-64/ulog.tbl: Remove.
* sysdeps/m68k/m680x0/fpu/e_log_data.c: New file.
Optimized exp and exp2 implementations using a lookup table for
fractional powers of 2. There are several variants, see e_exp_data.c,
they can be selected by modifying math_config.h allowing different
tradeoffs.
The default selection should be acceptable as generic libm code.
Worst case error is 0.509 ULP for exp and 0.507 ULP for exp2, on
aarch64 the rodata size is 2160 bytes, shared between exp and exp2.
On aarch64 .text + .rodata size decreased by 24912 bytes.
The non-nearest rounding error is less than 1 ULP even on targets
without efficient round implementation (although the error rate is
higher in that case). Targets with single instruction, rounding mode
independent, to nearest integer rounding and conversion can use them
by setting TOINT_INTRINSICS and adding the necessary code to their
math_private.h.
The __exp1 code uses the same algorithm, so the error bound of pow
increased a bit.
New double precision error handling code was added following the
style of the single precision error handling code.
Improvements on Cortex-A72 compared to current glibc master:
exp thruput: 1.61x in [-9.9 9.9]
exp latency: 1.53x in [-9.9 9.9]
exp thruput: 1.13x in [0.5 1]
exp latency: 1.30x in [0.5 1]
exp2 thruput: 2.03x in [-9.9 9.9]
exp2 latency: 1.64x in [-9.9 9.9]
For small (< 1) inputs the current exp code uses a separate algorithm
so the speed up there is less.
Was tested on
aarch64-linux-gnu (TOINT_INTRINSICS, fma contraction) and
arm-linux-gnueabihf (!TOINT_INTRINSICS, no fma contraction) and
x86_64-linux-gnu (!TOINT_INTRINSICS, no fma contraction) and
powerpc64le-linux-gnu (!TOINT_INTRINSICS, fma contraction) targets,
only non-nearest rounding ulp errors increase and they are within
acceptable bounds (ulp updates are in separate patches).
* NEWS: Mention exp and exp2 improvements.
* math/Makefile (libm-support): Remove t_exp.
(type-double-routines): Add math_err and e_exp_data.
* sysdeps/aarch64/libm-test-ulps: Update.
* sysdeps/arm/libm-test-ulps: Update.
* sysdeps/i386/fpu/e_exp_data.c: New file.
* sysdeps/i386/fpu/math_err.c: New file.
* sysdeps/i386/fpu/t_exp.c: Remove.
* sysdeps/ia64/fpu/e_exp_data.c: New file.
* sysdeps/ia64/fpu/math_err.c: New file.
* sysdeps/ia64/fpu/t_exp.c: Remove.
* sysdeps/ieee754/dbl-64/e_exp.c: Rewrite.
* sysdeps/ieee754/dbl-64/e_exp2.c: Rewrite.
* sysdeps/ieee754/dbl-64/e_exp_data.c: New file.
* sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Update error bound.
* sysdeps/ieee754/dbl-64/eexp.tbl: Remove.
* sysdeps/ieee754/dbl-64/math_config.h: New file.
* sysdeps/ieee754/dbl-64/math_err.c: New file.
* sysdeps/ieee754/dbl-64/t_exp.c: Remove.
* sysdeps/ieee754/dbl-64/t_exp2.h: Remove.
* sysdeps/ieee754/dbl-64/uexp.h: Remove.
* sysdeps/ieee754/dbl-64/uexp.tbl: Remove.
* sysdeps/m68k/m680x0/fpu/e_exp_data.c: New file.
* sysdeps/m68k/m680x0/fpu/math_err.c: New file.
* sysdeps/m68k/m680x0/fpu/t_exp.c: Remove.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* sysdeps/x86_64/fpu/libm-test-ulps: Update.
Initially, this function was restricted to _GNU_SOURCE, but experience
shows that compatibility with existing build systems is improved if we
declare it under _DEFAULT_SOURCE as well.
The NEWS entry for sinf improvements is listed for 2.28, while it was
committed in 2.29, so move it there and mention tanf.
Committed as obvious.
* NEWS: Move optimized sinf entry to 2.29.
The second patch improves performance of sinf and cosf using the same
algorithms and polynomials. The returned values are identical to sincosf
for the same input. ULP definitions for AArch64 and x64 are updated.
sinf/cosf througput gains on Cortex-A72:
* |x| < 0x1p-12 : 1.2x
* |x| < M_PI_4 : 1.8x
* |x| < 2 * M_PI: 1.7x
* |x| < 120.0 : 2.3x
* |x| < Inf : 3.0x
* NEWS: Mention sinf, cosf, sincosf.
* sysdeps/aarch64/libm-test-ulps: Update ULP for sinf, cosf, sincosf.
* sysdeps/x86_64/fpu/libm-test-ulps: Update ULP for sinf and cosf.
* sysdeps/x86_64/fpu/multiarch/s_sincosf-fma.c: Add definitions of
constants rather than including generic sincosf.h.
* sysdeps/x86_64/fpu/s_sincosf_data.c: Remove.
* sysdeps/ieee754/flt-32/s_cosf.c (cosf): Rewrite.
* sysdeps/ieee754/flt-32/s_sincosf.h (reduced_sin): Remove.
(reduced_cos): Remove.
(sinf_poly): New function.
* sysdeps/ieee754/flt-32/s_sinf.c (sinf): Rewrite.
The convenience install target 'install-locale-files' is created
to allow distributions to install all of the SUPPORTED locales as
files instead of into the locale-archive.
You invoke the new convenience target like this:
make localedata/install-locale-files DESTDIR=<prefix>
The glibc.tune namespace is vaguely named since it is a 'tunable', so
give it a more specific name that describes what it refers to. Rename
the tunable namespace to 'cpu' to more accurately reflect what it
encompasses. Also rename glibc.tune.cpu to glibc.cpu.name since
glibc.cpu.cpu is weird.
* NEWS: Mention the change.
* elf/dl-tunables.list: Rename tune namespace to cpu.
* sysdeps/powerpc/dl-tunables.list: Likewise.
* sysdeps/x86/dl-tunables.list: Likewise.
* sysdeps/aarch64/dl-tunables.list: Rename tune.cpu to
cpu.name.
* elf/dl-hwcaps.c (_dl_important_hwcaps): Adjust.
* elf/dl-hwcaps.h (GET_HWCAP_MASK): Likewise.
* manual/README.tunables: Likewise.
* manual/tunables.texi: Likewise.
* sysdeps/powerpc/cpu-features.c: Likewise.
* sysdeps/unix/sysv/linux/aarch64/cpu-features.c
(init_cpu_features): Likewise.
* sysdeps/x86/cpu-features.c: Likewise.
* sysdeps/x86/cpu-features.h: Likewise.
* sysdeps/x86/cpu-tunables.c: Likewise.
* sysdeps/x86_64/Makefile: Likewise.
* sysdeps/x86/dl-cet.c: Likewise.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Glibc supports two grammatical forms of month names and we keep adding
the locale data which actually use this feature but those two forms are
not necessarily nominative and genitive. It is better to use a more
generic term.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Multiple updates for Occitan language including alternative month names,
update abday and abmon, fix typos in day, fix d_fmt, correct LC_NAME,
and use “copy "ca_ES"” as LC_COLLATE.
[BZ #23140]
* localedata/locales/oc_FR (mon): Rename to...
(alt_mon): This, then update October (typo fix).
(mon): New content (genitive case, month names preceded by
"de" or "d’").
[BZ #23422]
* localedata/locales/oc_FR (abday): Update all items.
(day): Update Wednesday and Saturday (typo fixes).
(abmon): Update all items, except May.
(d_fmt): Update "%d.%m.%Y" -> "%d/%m/%Y".
(LC_IDENTIFICATION): Bump the revision number and date.
Keep the "category" entries in alphabetic order.
(LC_ADDRESS): Remove no longer needed comment.
(LC_COLLATE): Use “copy "ca_ES"”.
(LC_NAME): Set the correct values of "name_fmt", "name_mr", and
"name_mrs".
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Define a new ABSOLUTE ABI for static linker's use with EI_ABIVERSION
where correct absolute (SHN_ABS) symbol run-time load semantics is
required. This way it can be ensured at static link time that a program
or DSO will not suffer from previous semantics where absolute symbols
were relocated by the base address, or symbols whose `st_value' is zero
silently ignored leading to a confusing "undefined symbol" error message
at load time, and instead "ELF file ABI version invalid" is printed with
old dynamic loaders, making it clear that there is an ABI version
incompatibility.
[BZ #19818]
[BZ #23307]
* libc-abis (ABSOLUTE): New ABI.
* sysdeps/unix/sysv/linux/mips/libc-abis (ABSOLUTE): New ABI.
* NEWS: Mention the new ABI.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The implementation falls back to renameat if renameat2 is not available
in the kernel (or in the kernel headers) and the flags argument is zero.
Without kernel support, a non-zero argument returns EINVAL, not ENOSYS.
This mirrors what the kernel does for invalid renameat2 flags.
$(file …) appears to be the only convenient way to create files
with newlines and make substitution variables. This needs make 4.0
(released in 2013), so update the requirement to match.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Unicode 11.0.0 Support: Character encoding, character type info, and
transliteration tables are all updated to Unicode 11.0.0, using
the generator scripts contributed by Mike FABIAN (Red Hat).
Some info about the number of characters added:
Total added characters in newly generated CHARMAP: 684
Total added characters in newly generated WIDTH: 119
alpha: Added 380 characters in new ctype which were not in old ctype
combining: Added 56 characters in new ctype which were not in old ctype
combining_level3: Added 37 characters in new ctype which were not in old ctype
graph: Added 684 characters in new ctype which were not in old ctype
lower: Added 82 characters in new ctype which were not in old ctype
print: Added 684 characters in new ctype which were not in old ctype
punct: Added 304 characters in new ctype which were not in old ctype
tolower: Added 79 characters in new ctype which were not in old ctype
totitle: Added 33 characters in new ctype which were not in old ctype
toupper: Added 79 characters in new ctype which were not in old ctype
upper: Added 79 characters in new ctype which were not in old ctype
No characters were removed.
[BZ #23308]
* unicode-gen/Makefile (UNICODE_VERSION): Set to 11.0.0.
* localedata/unicode-gen/DerivedCoreProperties.txt: Update to Unicode 11.0.0.
* localedata/unicode-gen/EastAsianWidth.txt: likewise.
* localedata/unicode-gen/PropList.txt: likewise.
* localedata/unicode-gen/UnicodeData.txt: likewise.
* localedata/charmaps/UTF-8: Regenerate.
* localedata/locales/i18n_ctype: likewise.
* localedata/locales/tr_TR: likewise.
* localedata/locales/translit_circle: likewise.
* localedata/locales/translit_cjk_compat: likewise.
* localedata/locales/translit_combining: likewise.
* localedata/locales/translit_compat: likewise.
* localedata/locales/translit_font: likewise.
* localedata/locales/translit_fraction: likewise.
This locale already contained correct data in mon array. Updated from
CLDR to start the month names with the lowercase letters.
alt_mon is a new import from CLDR. The change has been consulted
off-list with a native speaker.
[BZ #23140]
* localedata/locales/hy_AM (mon): Synchronize with CLDR (lowercase,
genitive case).
(alt_mon): New entry, import from CLDR (nominative case).
Some Linux distributions are experimenting with a new, separately
maintained and hopefully more agile implementation of the crypt
API. To facilitate this, add a configure option which disables
glibc's embedded libcrypt. When this option is given, libcrypt.*
and crypt.h will not be built nor installed.
The functions encrypt, setkey, encrypt_r, setkey_r, cbc_crypt,
ecb_crypt, and des_setparity should not be used in new programs,
because they use the DES block cipher, which is unacceptably weak by
modern standards. Demote all of them to compatibility symbols, and
remove their prototypes from installed headers. cbc_crypt, ecb_crypt,
and des_setparity were already compat symbols when glibc was
configured with --disable-obsolete-rpc.
POSIX requires encrypt and setkey to be available when _XOPEN_CRYPT
is defined, so this change also removes the definition of X_OPEN_CRYPT
from <unistd.h>.
The entire "DES Encryption" section is dropped from the manual, as is
the mention of AUTH_DES and FIPS 140-2 in the introduction to
crypt.texi. The documentation of 'memfrob' cross-referenced the DES
Encryption section, which is replaced by a hyperlink to libgcrypt, and
while I was in there I spruced up the actual documentation of
'memfrob' and 'strfry' a little. It's still fairly jokey, because
those functions _are_ jokes, but they do also have real use cases, so
people trying to use them for real should have all the information
they need.
DES-based authentication for Sun RPC is also insecure and should be
deprecated or even removed, but maybe that can be left as TI-RPC's
problem.
This patch fixes the OFD ("file private") locks for architectures that
support non-LFS flock definition (__USE_FILE_OFFSET64 not defined). The
issue in this case is both F_OFD_{GETLK,SETLK,SETLKW} and
F_{SET,GET}L{W}K64 expects a flock64 argument and when using old
F_OFD_* flags with a non LFS flock argument the kernel might interpret
the underlying data wrongly. Kernel idea originally was to avoid using
such flags in non-LFS syscall, but since GLIBC uses fcntl with LFS
semantic as default it is possible to provide the functionality and
avoid the bogus struct kernel passing by adjusting the struct manually
for the required flags.
The idea follows other LFS interfaces that provide two symbols:
1. A new LFS fcntl64 is added on default ABI with the usual macros to
select it for FILE_OFFSET_BITS=64.
2. The Linux non-LFS fcntl use a stack allocated struct flock64 for
F_OFD_{GETLK,SETLK,SETLKW} copy the results on the user provided
struct.
3. Keep a compat symbol with old broken semantic for architectures
that do not define __OFF_T_MATCHES_OFF64_T.
So for architectures which defines __USE_FILE_OFFSET64, fcntl64 will
aliased to fcntl and no adjustment would be required. So to actually
use F_OFD_* with LFS support the source must be built with LFS support
(_FILE_OFFSET_BITS=64).
Also F_OFD_SETLKW command is handled a cancellation point, as for
F_SETLKW{64}.
Checked on x86_64-linux-gnu and i686-linux-gnu.
[BZ #20251]
* NEWS: Mention fcntl64 addition.
* csu/check_fds.c: Replace __fcntl_nocancel by __fcntl64_nocancel.
* login/utmp_file.c: Likewise.
* sysdeps/posix/fdopendir.c: Likewise.
* sysdeps/posix/opendir.c: Likewise.
* sysdeps/unix/pt-fcntl.c: Likewise.
* include/fcntl.h (__libc_fcntl64, __fcntl64,
__fcntl64_nocancel_adjusted): New prototype.
(__fcntl_nocancel_adjusted): Remove prototype.
* io/Makefile (routines): Add fcntl64.
(CFLAGS-fcntl64.c): New rule.
* io/Versions [GLIBC_2.28] (fcntl64): New symbol.
[GLIBC_PRIVATE] (__libc_fcntl): Rename to __libc_fcntl64.
* io/fcntl.h (fcntl64): Add prototype and redirect if
__USE_FILE_OFFSET64 is defined.
* io/fcntl64.c: New file.
* manual/llio.text: Add a note for which commands fcntl acts a
cancellation point.
* nptl/Makefile (CFLAGS-fcntl64.c): New rule.
* sysdeps/mach/hurd/fcntl.c: Alias fcntl to fcntl64 symbols.
* sysdeps/mach/hurd/i386/libc.abilist [GLIBC_2.28] (fcntl, fcntl64):
New symbols.
* sysdeps/unix/sysv/linux/fcntl.c (__libc_fcntl): Fix F_GETLK64,
F_OFD_GETLK, F_SETLK64, F_SETLKW64, F_OFD_SETLK, and F_OFD_SETLKW for
non-LFS case.
* sysdeps/unix/sysv/linux/fcntl64.c: New file.
* sysdeps/unix/sysv/linux/fcntl_nocancel.c (__fcntl_nocancel): Rename
to __fcntl64_nocancel.
(__fcntl_nocancel_adjusted): Rename to __fcntl64_nocancel_adjusted.
* sysdeps/unix/sysv/linux/not-cancel.h (__fcntl_nocancel): Rename
to __fcntl64_nocancel.
* sysdeps/unix/sysv/linux/tst-ofdlocks.c: New file.
* sysdeps/unix/sysv/linux/tst-ofdlocks-compat.c: Likewise.
* sysdeps/unix/sysv/linux/Makefile (tests): Add tst-ofdlocks.
(tests-internal): Add tst-ofdlocks-compat.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist [GLIBC_2.28]
(fcntl64): New symbol.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist [GLIBC_2.28] (fcntl,
fcntl64): Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilis: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
Kashubian language is not supported by CLDR, data copied from Wikipedia
and documents released by RJK (official Kashubian Language Council),
also consulted with a native speaker.
Note that this language also needs ab_alt_mon feature due to the month
May: nominative "môj", genitive "maja"; abbreviated nominative "môj",
abbreviated genitive "maj".
[BZ #23140]
* localedata/locales/csb_PL (mon): Rename to...
(alt_mon): This.
(abmon): Rename to...
(ab_alt_mon): This.
(mon): Add with proper genitive forms, copy from Wikipedia.
(abmon): Likewise.
This commit improves DST handling significantly in the following
ways: firstly is_dst () is overhauled to correctly process DST
sequences that would be accepted given the ELF gABI. This means that
we actually now accept slightly more sequences than before. Now we
accept $ORIGIN$ORIGIN, but in the past we accepted only $ORIGIN\0 or
$ORIGIN/..., but this kind of behaviour results in unexpected
and uninterpreted DST sequences being used as literal search paths
leading to security defects. Therefore the first step in correcting
this defect is making is_dst () properly account for all DSTs
and making the function context free in the sense that it counts
DSTs without knowledge of path, or AT_SECURE. Next, _dl_dst_count ()
is also simplified to count all DSTs regardless of context.
Then in _dl_dst_substitute () we reintroduce context-dependent
processing for such things as AT_SECURE handling. At the level of
_dl_dst_substitute we can have access to things like the true start
of the string sequence to validate $ORIGIN-based paths rooted in
trusted directories. Lastly, we tighten up the accepted sequences
in AT_SECURE, and avoid leaving known unexpanded DSTs, this is
noted in the NEWS entry.
Verified with a sequence of 68 tests on x86_64 that cover
non-AT_SECURE and AT_SECURE testing using a sysroot (requires root
to run). The tests cover cases for bug 23102, bug 21942, bug 18018,
and bug 23259. These tests are not yet appropriate for the glibc
regression testsuite, but with the upcoming test-in-container testing
framework it should be possible to include these tests upstream soon.
See the mailing list for the tests:
https://www.sourceware.org/ml/libc-alpha/2018-06/msg00251.html
As a followup of fixing bug 10871, these three languages now support two
grammatical cases of the month names.
This commit does not resolve the bug because there are more languages
to be committed.
[BZ #23140]
* localedata/locales/gd_GB (mon): Rename to...
(alt_mon): This.
(mon): Import from CLDR (genitive case).
* localedata/locales/hsb_DE (mon): Rename to...
(alt_mon): This.
(mon): Import from CLDR (genitive case).
* localedata/locales/wa_BE (mon): Rename to...
(alt_mon): This.
(mon): Add, fill with the proper genitive forms, but CLDR data
is incomplete; completed according to the comments in this file.
(d_t_fmt): Do not use "di" before the month name, no longer needed.
* localedata/locales/wa_BE (country_name): Reword
"Beljike" -> "Beldjike".
The llseek function name is an obsolete, Linux-specific, unprototyped
name for lseek64 with a link-time warning. This patch completes the
obsoletion of this function name by making it into a compat symbol,
not available for newly linked programs and not included in the ABI
for new ports.
When a compat symbol is defined in syscalls.list, the code for that
function is not built at all for static linking unless some non-compat
symbol for that function is also defined with an explicit symbol
version, so an explicit symbol version for lseek64 is added to the
MIPS n32 syscalls.list. The case in make-syscalls.sh that handles
such explicit non-compat symbol versions then needs to be changed to
use weak_alias instead of strong_alias when the syscall is built
outside of libc, to avoid linknamespace failures from a strong lseek64
symbol in static libpthread.
The x32 llseek.S was as far as I could tell already unused (nothing
builds an llseek.* source file, at least since the lseek / lseek64 /
llseek consolidation), so is removed in this patch as well.
Tested for x86_64 and x86, and with build-many-glibcs.py.
[BZ #18471]
* sysdeps/unix/make-syscalls.sh (emit_weak_aliases): Use weak
aliases for non-libc case of versioned symbols.
* sysdeps/unix/sysv/linux/lseek64.c: Include <shlib-compat.h>.
(llseek): Define as compat symbol if
[SHLIB_COMPAT (libc, GLIBC_2_0, GLIBC_2_28)], not as weak alias
with link warning.
* sysdeps/unix/sysv/linux/mips/mips64/n32/syscalls.list (llseek):
Make into a compat symbol, disabled for minimum symbol version
GLIBC_2.28 and later.
* sysdeps/unix/sysv/linux/x86_64/x32/llseek.S: Remove file.
The Linux nfsservctl syscall was removed in Linux 3.1. Since the
minimum kernel version for use with glibc is 3.2, the glibc wrapper
for this syscall can no longer usefully be called. This patch makes
it into a compat symbol, not provided at all for static linking or new
ports. (It was already the case that there was no header declaration
of this function.)
Tested for x86_64.
* sysdeps/unix/sysv/linux/syscalls.list (nfsservctl): Make into a
compat symbol, disabled for minimum symbol version GLIBC_2.28 and
later.
As for sysctl, ustat has been deprecated in favor of {f}statfs. Also
some newer ports which uses generic interface builds a stub version that
returns ENOSYS.
This patch deprecates ustat interface by removing ustat.h related headers,
adding a compatibility symbol, and avoiding new ports to build and provide
the symbol.
Checked on x86_64-linux-gnu and i686-linux-gnu. Also checked with a
check-abi on all affected ABIs.
* NEWS: Add ustat.h deprecation entry.
* bits/ustat.h: Remove file.
* misc/sys/ustat.h: Likewise.
* misc/ustat.h: Likewise.
* sysdeps/unix/sysv/linux/generic/ustat.c: Likewise.
* misc/Makefile (headers): Remove ustat.h and sys/ustat.h.
* misc/ustat.c (__ustat): Rename to __old_ustat and export only in
compatibility mode.
* sysdeps/unix/sysv/linux/ustat.c (__ustat): Likewise.
* sysdeps/unix/sysv/linux/mips/ustat.c: Define DEV_TO_KDEV and use
generic Linux implementation.
Since tile support has been removed from the Linux kernel for 4.17,
this patch removes the (unmaintained) port to tilegx from glibc (the
tilepro support having been previously removed). This reflects the
general principle that a glibc port needs upstream support for the
architecture in all the components it build-depends on (so binutils,
GCC and the Linux kernel, for the normal case of a port supporting the
Linux kernel but no other OS), in order to be maintainable.
Apart from removal of sysdeps/tile and sysdeps/unix/sysv/linux/tile,
there are updates to various comments referencing tile for which
removal of those references seemed appropriate. The configuration is
removed from README and from build-many-glibcs.py. contrib.texi keeps
mention of removed contributions, but I updated Chris Metcalf's entry
to reflect that he also contributed the non-removed support for the
generic Linux kernel syscall interface.
__ASSUME_FADVISE64_64_NO_ALIGN support is removed, as it was only used
by tile.
* sysdeps/tile: Remove.
* sysdeps/unix/sysv/linux/tile: Likewise.
* README (tilegx-*-linux-gnu): Remove from list of supported
configurations.
* manual/contrib.texi (Contributors): Mention Chris Metcalf's
contribution of support for generic Linux kernel syscall
interface.
* scripts/build-many-glibcs.py (Context.add_all_configs): Remove
tilegx configurations.
(Config.install_linux_headers): Do not handle tile.
* sysdeps/unix/sysv/linux/aarch64/ldsodefs.h: Do not mention Tile
in comment.
* sysdeps/unix/sysv/linux/nios2/Makefile: Likewise.
* sysdeps/unix/sysv/linux/posix_fadvise.c: Likewise.
[__ASSUME_FADVISE64_64_NO_ALIGN] (__ALIGNMENT_ARG): Remove
conditional undefine and redefine.
* sysdeps/unix/sysv/linux/posix_fadvise64.c: Do not mention Tile
in comment.
[__ASSUME_FADVISE64_64_NO_ALIGN] (__ALIGNMENT_ARG): Remove
conditional undefine and redefine.
Make the indentation of the "Deprecated and removed features" section
for 2.28 consistent with the indentation of the "Major new features"
section above. Also, consistently refer to "stdio functions" instead
of "stdio.h functions".
Alternative (nominative/genitive) month names have been added to the
Catalan and Czech locale data and the abbreviated alternative names to
Catalan and Greek.
C99 specifies that the EOF condition on a file is "sticky": once EOF
has been encountered, all subsequent reads should continue to return
EOF until the file is closed or something clears the "end-of-file
indicator" (e.g. fseek, clearerr). This is arguably a change from
C89, where the wording was ambiguous; the BSDs always had sticky EOF,
but the System V lineage would attempt to read from the underlying fd
again. GNU libc has followed System V for as long as we've been
using libio, but nowadays C99 conformance and BSD compatibility are
more important than System V compatibility.
You might wonder if changing the _underflow impls is sufficient to
apply the C99 semantics to all of the many stdio functions that
perform input. It should be enough to cover all paths to _IO_SYSREAD,
and the only other functions that call _IO_SYSREAD are the _seekoff
impls, which is OK because seeking clears EOF, and the _xsgetn impls,
which, as far as I can tell, are unused within glibc.
The test programs in this patch use a pseudoterminal to set up the
necessary conditions. To facilitate this I added a new test-support
function that sets up a pair of pty file descriptors for you; it's
almost the same as BSD openpty, the only differences are that it
allocates the optionally-returned tty pathname with malloc, and that
it crashes if anything goes wrong.
[BZ #1190]
[BZ #19476]
* libio/fileops.c (_IO_new_file_underflow): Return EOF immediately
if the _IO_EOF_SEEN bit is already set; update commentary.
* libio/oldfileops.c (_IO_old_file_underflow): Likewise.
* libio/wfileops.c (_IO_wfile_underflow): Likewise.
* support/support_openpty.c, support/tty.h: New files.
* support/Makefile (libsupport-routines): Add support_openpty.
* libio/tst-fgetc-after-eof.c, wcsmbs/test-fgetwc-after-eof.c:
New test cases.
* libio/Makefile (tests): Add tst-fgetc-after-eof.
* wcsmbs/Makefile (tests): Add tst-fgetwc-after-eof.
This completes the deprecation and removal of this inclusion, which
was begun in the 2.25 release.
* posix/sys/types.h: Don't include sys/sysmacros.h.
* misc/sys/sysmacros.h: Remove the conditional deprecation
warnings for the macros defined by this header.
This patch adds the narrowing add functions from TS 18661-1 to glibc's
libm: fadd, faddl, daddl, f32addf64, f32addf32x, f32xaddf64 for all
configurations; f32addf64x, f32addf128, f64addf64x, f64addf128,
f32xaddf64x, f32xaddf128, f64xaddf128 for configurations with
_Float64x and _Float128; __nldbl_daddl for ldbl-opt. As discussed for
the build infrastructure patch, tgmath.h support is deliberately
deferred, and FP_FAST_* macros are not applicable without optimized
function implementations.
Function implementations are added for all relevant pairs of formats
(including certain cases of a format and itself where more than one
type has that format). The main implementations use round-to-odd, or
a trivial computation in the case where both formats are the same or
where the wider format is IBM long double (in which case we don't
attempt to be correctly rounding). The sysdeps/ieee754/soft-fp
implementations use soft-fp, and are used automatically for
configurations without exceptions and rounding modes by virtue of
existing Implies files. As previously discussed, optimized versions
for particular architectures are possible, but not included.
i386 gets a special version of f32xaddf64 to avoid problems with
double rounding (similar to the existing fdim version), since this
function must round just once without an intermediate rounding to long
double. (No such special version is needed for any other function,
because the nontrivial functions use round-to-odd, which does the
intermediate computation with the rounding mode set to round-to-zero,
and double rounding is OK except in round-to-nearest mode, so is OK
for that intermediate round-to-zero computation.) mul and div will
need slightly different special versions for i386 (using round-to-odd
on long double instead of precision control) because of the
possibility of inexact intermediate results in the subnormal range for
double.
To reduce duplication among the different function implementations,
math-narrow.h gets macros CHECK_NARROW_ADD, NARROW_ADD_ROUND_TO_ODD
and NARROW_ADD_TRIVIAL.
In the trivial cases and for any architecture-specific optimized
implementations, the overhead of the errno setting might be
significant, but I think that's best handled through compiler built-in
functions rather than providing separate no-errno versions in glibc
(and likewise there are no __*_finite entry points for these function
provided, __*_finite effectively being no-errno versions at present in
most cases).
Tested for x86_64 and x86, with both GCC 6 and GCC 7. Tested for
mips64 (all three ABIs, both hard and soft float) and powerpc with GCC
7. Tested with build-many-glibcs.py with both GCC 6 and GCC 7.
* math/Makefile (libm-narrow-fns): Add add.
(libm-test-funcs-narrow): Likewise.
* math/Versions (GLIBC_2.28): Add narrowing add functions.
* math/bits/mathcalls-narrow.h (add): Use __MATHCALL_NARROW .
* math/gen-auto-libm-tests.c (test_functions): Add add.
* math/math-narrow.h (CHECK_NARROW_ADD): New macro.
(NARROW_ADD_ROUND_TO_ODD): Likewise.
(NARROW_ADD_TRIVIAL): Likewise.
* sysdeps/ieee754/float128/float128_private.h (__faddl): New
macro.
(__daddl): Likewise.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fadd and
dadd.
(CFLAGS-nldbl-dadd.c): New variable.
(CFLAGS-nldbl-fadd.c): Likewise.
* sysdeps/ieee754/ldbl-opt/Versions (GLIBC_2.28): Add
__nldbl_daddl.
* sysdeps/ieee754/ldbl-opt/nldbl-compat.h (__nldbl_daddl): New
prototype.
* manual/arith.texi (Misc FP Arithmetic): Document fadd, faddl,
daddl, fMaddfN, fMaddfNx, fMxaddfN and fMxaddfNx.
* math/auto-libm-test-in: Add tests of add.
* math/auto-libm-test-out-narrow-add: New generated file.
* math/libm-test-narrow-add.inc: New file.
* sysdeps/i386/fpu/s_f32xaddf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_f32xaddf64.c: Likewise.
* sysdeps/ieee754/dbl-64/s_fadd.c: Likewise.
* sysdeps/ieee754/float128/s_f32addf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64addf128.c: Likewise.
* sysdeps/ieee754/float128/s_f64xaddf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_f64xaddf128.c: Likewise.
* sysdeps/ieee754/ldbl-128/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_daddl.c: Likewise.
* sysdeps/ieee754/ldbl-96/s_faddl.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-dadd.c: Likewise.
* sysdeps/ieee754/ldbl-opt/nldbl-fadd.c: Likewise.
* sysdeps/ieee754/soft-fp/s_daddl.c: Likewise.
* sysdeps/ieee754/soft-fp/s_fadd.c: Likewise.
* sysdeps/ieee754/soft-fp/s_faddl.c: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Update.
* sysdeps/mach/hurd/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
We shipped 2.27 with libio.h and _G_config.h still installed but
issuing warnings when used. Let's stop installing them early in 2.28
so that we have plenty of time to think of another plan if there are
problems.
The public stdio.h had a genuine dependency on libio.h for the
complete definitions of FILE and cookie_io_functions_t, and a genuine
dependency on _G_config.h for the complete definitions of fpos_t and
fpos64_t; these are moved to single-type headers.
bits/types/struct_FILE.h also provides a handful of accessor and
bitflags macros so that code is not duplicated between bits/stdio.h
and libio.h. All the other _IO_ and _G_ names used by the public
stdio.h can be replaced with either public names or __-names.
In order to minimize the risk of breaking our own compatibility code,
bits/types/struct_FILE.h preserves the _IO_USE_OLD_IO_FILE mechanism
exactly as it was in libio.h, but you have to define _LIBC to use it,
or it'll error out. Similarly, _IO_lock_t_defined is preserved
exactly, but will error out if used without defining _LIBC.
Internally, include/stdio.h continues to include libio.h, and libio.h
scrupulously provides every _IO_* and _G_* name that it always did,
perhaps now defined in terms of the public names. This is how this
patch avoids touching dozens of files throughout glibc and becoming
entangled with the _IO_MTSAFE_IO mess. The remaining patches in this
series eliminate most of the _G_ names.
Tested on x86_64-linux; in addition to the test suite, I installed the
library in a sysroot and verified that a simple program that uses
stdio.h could be compiled against the installed library, and I also
verified that installed stripped libraries are unchanged.
* libio/bits/types/__fpos_t.h, libio/bits/types/__fpos64_t.h:
New single-type headers split from _G_config.h.
* libio/bits/types/cookie_io_functions_t.h
* libio/bits/types/struct_FILE.h
New single-type headers split from libio.h.
* libio/Makefile: Install the above new headers. Don't install
libio.h, _G_config.h, bits/libio.h, bits/_G_config.h, or
bits/libio-ldbl.h.
* libio/_G_config.h, libio/libio.h: Delete file.
* libio/bits/libio.h: Remove improper-inclusion guard.
Include stdio.h and don't repeat anything that it does.
Define _IO_fpos_t as __fpos_t, _IO_fpos64_t as __fpos64_t,
_IO_BUFSIZ as BUFSIZ, _IO_va_list as __gnuc_va_list,
__io_read_fn as cookie_read_function_t,
__io_write_fn as cookie_write_function_t,
__io_seek_fn as cookie_seek_function_t,
__io_close_fn as cookie_close_function_t,
and _IO_cookie_io_functions_t as cookie_io_functions_t.
Define _STDIO_USES_IOSTREAM, __HAVE_COLUMN, and _IO_file_flags
here, in the "compatibility defines" section. Remove an #if 0
block. Use the "body" macros from bits/types/struct_FILE.h to
define _IO_getc_unlocked, _IO_putc_unlocked, _IO_feof_unlocked,
and _IO_ferror_unlocked.
Move prototypes of __uflow and __overflow...
* libio/stdio.h: ...here. Don't include bits/libio.h.
Don't define _STDIO_USES_IOSTREAM. Get __gnuc_va_list
directly from stdarg.h. Include bits/types/__fpos_t.h,
bits/types/__fpos64_t.h, bits/types/struct_FILE.h,
and, when __USE_GNU, bits/types/cookie_io_functions_t.h.
Use __gnuc_va_list, not _G_va_list; __fpos_t, not _G_fpos_t;
__fpos64_t, not _G_fpos64_t; FILE, not struct _IO_FILE;
cookie_io_functions_t, not _IO_cookie_io_functions_t;
__ssize_t, not _IO_ssize_t. Unconditionally define
BUFSIZ as 8192 and EOF as (-1).
* libio/bits/stdio.h: Add multiple-include guard. Use the "body"
macros from bits/types/struct_FILE.h instead of _IO_* macros
from libio.h; use __gnuc_va_list instead of va_list and __ssize_t
instead of _IO_ssize_t.
* libio/bits/stdio2.h: Similarly.
* libio/iolibio.h: Add multiple-include guard.
Include bits/libio.h after stdio.h.
* libio/libioP.h: Add multiple-include guard.
Include stdio.h and bits/libio.h before iolibio.h.
* include/bits/types/__fpos_t.h, include/bits/types/__fpos64_t.h
* include/bits/types/cookie_io_functions_t.h
* include/bits/types/struct_FILE.h: New wrappers.
* bits/_G_config.h, sysdeps/unix/sysv/linux/_G_config.h:
Get definitions of _G_fpos_t and _G_fpos64_t from
bits/types/__fpos_t.h and bits/types/__fpos64_t.h
respectively. Remove improper-inclusion guards.
* conform/data/stdio.h-data: Update expectations of va_list.
* scripts/check-installed-headers.sh: Remove special case for
libio.h and _G_config.h.
The getc and putc macros in the public stdio.h expand to call _IO_getc
and _IO_putc respectively. As _IO_getc, fgetc, and getc are all aliases
for the same function, and _IO_putc, fputc, and putc are also all aliases
for the same function, the macros are pointless. The C standard does
not require getc and putc to be macros, so let's just not have macros.
All four symbols are exported from libc.so at the same, ancient symbol
version, so there should be no risks for binary compatibility. Similarly,
the getchar and putchar inlines in bits/stdio.h forward to getc and putc
instead of their _IO_ aliases.
As a change from longstanding historical practice, this does seem
like it might break _something_, so there is a note in NEWS, which
is also a convenient place to advise people that if they thought getc
and putc had reduced per-character overhead they should consider using
getc_unlocked and putc_unlocked instead. (These are also not macros,
but when optimizing, they are inlines.)
* libio/stdio.h: Don't define getc or putc as macros.
* libio/bits/stdio.h (getchar, putchar): Use getc and putc,
not _IO_getc and _IO_putc.
[BZ #10871]
* NEWS: List the languages which actually use the alternative
months feature in this release. Also explain that "alt_mon" and
"ab_alt_mon" are optional.
During the upstreaming process it was suggested that I add a handful of
small documentation entries about the RISC-V port, which I've collected
here.
2018-01-29 Palmer Dabbelt <palmer@sifive.com>
* manual/math.texi: RISC-V supports _Float128 and _Float64x.
[BZ #10871]
* manual/locale.texi: Document ALTMON_1..12 constants for
nl_langinfo. Specify when to use ALTMON instead of MON.
* manual/time.texi (strftime, strptime): Document GNU extension
permitting O modifier with %B and %b. Specify when to use
%OB instead of %B.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Currently getcwd(3) can succeed without returning an absolute path
because the underlying getcwd syscall, starting with linux commit
v2.6.36-rc1~96^2~2, may succeed without returning an absolute path.
This is a conformance issue because "The getcwd() function shall
place an absolute pathname of the current working directory
in the array pointed to by buf, and return buf".
This is also a security issue because a non-absolute path returned
by getcwd(3) causes a buffer underflow in realpath(3).
Fix this by checking the path returned by getcwd syscall and falling
back to generic_getcwd if the path is not absolute, effectively making
getcwd(3) fail with ENOENT. The error code is chosen for consistency
with the case when the current directory is unlinked.
[BZ #22679]
CVE-2018-1000001
* sysdeps/unix/sysv/linux/getcwd.c (__getcwd): Fall back to
generic_getcwd if the path returned by getcwd syscall is not absolute.
* io/tst-getcwd-abspath.c: New test.
* io/Makefile (tests): Add tst-getcwd-abspath.
Since the x86-64 assembly version of sincosf is higly optimized with
vector instructions, there isn't much room for improvement. However
s_sincosf.c written in C with vector math and intrinsics can be
optimized by GCC with FMA.
On Skylake, bench-sincosf reports performance improvement:
Assembly FMA improvement
max 104.042 101.008 3%
min 9.426 8.586 10%
mean 20.6209 18.2238 13%
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Add s_sincosf-sse2 and s_sincosf-fma.
(CFLAGS-s_sincosf-fma.c): New.
* sysdeps/x86_64/fpu/multiarch/s_sincosf-fma.c: New file.
* sysdeps/x86_64/fpu/multiarch/s_sincosf-sse2.S: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_sincosf.c: Likewise.
* sysdeps/x86_64/fpu/s_sincosf.S: Don't add alias if
__sincosf is defined.
The fillin_rpath function in elf/dl-load.c loops over each RPATH or
RUNPATH tokens and interprets empty tokens as the current directory
("./"). In practice the check for empty token is done *after* the
dynamic string token expansion. The expansion process can return an
empty string for the $ORIGIN token if __libc_enable_secure is set
or if the path of the binary can not be determined (/proc not mounted).
Fix that by moving the check for empty tokens before the dynamic string
token expansion. In addition, check for NULL pointer or empty strings
return by expand_dynamic_string_token.
The above changes highlighted a bug in decompose_rpath, an empty array
is represented by the first element being NULL at the fillin_rpath
level, but by using a -1 pointer in decompose_rpath and other functions.
Changelog:
[BZ #22625]
* elf/dl-load.c (fillin_rpath): Check for empty tokens before dynamic
string token expansion. Check for NULL pointer or empty string possibly
returned by expand_dynamic_string_token.
(decompose_rpath): Check for empty path after dynamic string
token expansion.
libio.h was originally the header for a set of supported GNU
extensions, but they have not been maintained as such in many years,
they are now standing in the way of improvements to stdio, and we
don't think there are any remaining external users. _G_config.h was
never intended for public use, but predates the bits convention.
Move both of these headers into the bits directory and provide stubs
at top level which issue deprecation warnings.
The contents of (bits/)libio.h and (bits/)_G_config.h are still
exposed to external software via stdio.h; changing that requires more
complex surgery than I have time to attempt right now.
* libio/libio.h, libio/_G_config.h: New stub headers which issue a
deprecation warning and then include <bits/libio.h>, <bits/_G_config.h>
respectively.
* libio/libio.h: Rename the original version of this file to
libio/bits/libio.h. Error out if not included by stdio.h or the
stub libio.h.
* include/libio.h: Move to include/bits. Forward to libio/bits/libio.h.
* sysdeps/generic/_G_config.h: Move to top-level bits/. Error out
if not included by bits/libio.h or the stub _G_config.h.
* sysdeps/unix/sysv/linux/_G_config.h: Move to
sysdeps/unix/sysv/linux/bits. Error out if not included by
bits/libio.h or the stub _G_config.h.
* libio/stdio.h: Include bits/libio.h, not libio.h.
* libio/Makefile: Install bits/libio.h and bits/_G_config.h as
well as libio.h and _G_config.h.
* csu/init.c, libio/fmemopen.c, libio/iolibio.h, libio/oldfmemopen.c
* libio/strfile.h, stdio-common/vfscanf.c
* sysdeps/pthread/flockfile.c, sysdeps/pthread/funlockfile.c
Include stdio.h, not _G_config.h nor libio.h.
* libio/iofgetpos.c: Also rename fgetpos64 out of the way.
* libio/iofsetpos.c: Also rename fsetpos64 out of the way.
* scripts/check-installed-headers.sh: Skip libio.h and _G_config.h.
ldconfig supports `include' directives and use the glob function to
process them. The glob function sort entries according to the LC_COLLATE
category. When using a standard "include /etc/ld.so.conf.d/*.conf" entry
in /etc/ld.so.conf, the order therefore depends on the locale used to
run ldconfig. A few examples of locale specific order that might be
disturbing in that context compared to the C locale:
- The cs_CZ and sk_SK locales sort the digits after the letters.
- The et_EE locale sorts the 'z' between 's' and 't'.
This patch fixes that by setting LC_COLLATE to C in order to process
files in deterministic order, independently of the locale used to launch
ldconfig.
NOTE: This should NOT be backported to older release branches.
Changelog:
[BZ #22505]
* elf/ldconfig.c (main): Call setlocale to force LC_COLLATE to C.
Static PIE extends address space layout randomization to static
executables. It provides additional security hardening benefits at
the cost of some memory and performance.
Dynamic linker, ld.so, is a standalone program which can be loaded at
any address. This patch adds a configure option, --enable-static-pie,
to embed the part of ld.so in static executable to create static position
independent executable (static PIE). A static PIE is similar to static
executable, but can be loaded at any address without help from a dynamic
linker. When --enable-static-pie is used to configure glibc, libc.a is
built as PIE and all static executables, including tests, are built as
static PIE. The resulting libc.a can be used together with GCC 8 or
above to build static PIE with the compiler option, -static-pie. But
GCC 8 isn't required to build glibc with --enable-static-pie. Only GCC
with PIE support is needed. When an older GCC is used to build glibc
with --enable-static-pie, proper input files are passed to linker to
create static executables as static PIE, together with "-z text" to
prevent dynamic relocations in read-only segments, which are not allowed
in static PIE.
The following changes are made for static PIE:
1. Add a new function, _dl_relocate_static_pie, to:
a. Get the run-time load address.
b. Read the dynamic section.
c. Perform dynamic relocations.
Dynamic linker also performs these steps. But static PIE doesn't load
any shared objects.
2. Call _dl_relocate_static_pie at entrance of LIBC_START_MAIN in
libc.a. crt1.o, which is used to create dynamic and non-PIE static
executables, is updated to include a dummy _dl_relocate_static_pie.
rcrt1.o is added to create static PIE, which will link in the real
_dl_relocate_static_pie. grcrt1.o is also added to create static PIE
with -pg. GCC 8 has been updated to support rcrt1.o and grcrt1.o for
static PIE.
Static PIE can work on all architectures which support PIE, provided:
1. Target must support accessing of local functions without dynamic
relocations, which is needed in start.S to call __libc_start_main with
function addresses of __libc_csu_init, __libc_csu_fini and main. All
functions in static PIE are local functions. If PIE start.S can't reach
main () defined in a shared object, the code sequence:
pass address of local_main to __libc_start_main
...
local_main:
tail call to main via PLT
can be used.
2. start.S is updated to check PIC instead SHARED for PIC code path and
avoid dynamic relocation, when PIC is defined and SHARED isn't defined,
to support static PIE.
3. All assembly codes are updated check PIC instead SHARED for PIC code
path to avoid dynamic relocations in read-only sections.
4. All assembly codes are updated check SHARED instead PIC for static
symbol name.
5. elf_machine_load_address in dl-machine.h are updated to support static
PIE.
6. __brk works without TLS nor dynamic relocations in read-only section
so that it can be used by __libc_setup_tls to initializes TLS in static
PIE.
NB: When glibc is built with GCC defaulted to PIE, libc.a is compiled
with -fPIE, regardless if --enable-static-pie is used to configure glibc.
When glibc is configured with --enable-static-pie, libc.a is compiled
with -fPIE, regardless whether GCC defaults to PIE or not. The same
libc.a can be used to build both static executable and static PIE.
There is no need for separate PIE copy of libc.a.
On x86-64, the normal static sln:
text data bss dec hex filename
625425 8284 5456 639165 9c0bd elf/sln
the static PIE sln:
text data bss dec hex filename
657626 20636 5392 683654 a6e86 elf/sln
The code size is increased by 5% and the binary size is increased by 7%.
Linker requirements to build glibc with --enable-static-pie:
1. Linker supports --no-dynamic-linker to remove PT_INTERP segment from
static PIE.
2. Linker can create working static PIE. The x86-64 linker needs the
fix for
https://sourceware.org/bugzilla/show_bug.cgi?id=21782
The i386 linker needs to be able to convert "movl main@GOT(%ebx), %eax"
to "leal main@GOTOFF(%ebx), %eax" if main is defined locally.
Binutils 2.29 or above are OK for i686 and x86-64. But linker status for
other targets need to be verified.
3. Linker should resolve undefined weak symbols to 0 in static PIE:
https://sourceware.org/bugzilla/show_bug.cgi?id=22269
4. Many ELF backend linkers incorrectly check bfd_link_pic for TLS
relocations, which should check bfd_link_executable instead:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Tested on aarch64, i686 and x86-64.
Using GCC 7 and binutils master branch, build-many-glibcs.py with
--enable-static-pie with all patches for static PIE applied have the
following build successes:
PASS: glibcs-aarch64_be-linux-gnu build
PASS: glibcs-aarch64-linux-gnu build
PASS: glibcs-armeb-linux-gnueabi-be8 build
PASS: glibcs-armeb-linux-gnueabi build
PASS: glibcs-armeb-linux-gnueabihf-be8 build
PASS: glibcs-armeb-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabi build
PASS: glibcs-arm-linux-gnueabihf build
PASS: glibcs-arm-linux-gnueabihf-v7a build
PASS: glibcs-arm-linux-gnueabihf-v7a-disable-multi-arch build
PASS: glibcs-m68k-linux-gnu build
PASS: glibcs-microblazeel-linux-gnu build
PASS: glibcs-microblaze-linux-gnu build
PASS: glibcs-mips64el-linux-gnu-n32 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n32-soft build
PASS: glibcs-mips64el-linux-gnu-n64 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64el-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64el-linux-gnu-n64-soft build
PASS: glibcs-mips64-linux-gnu-n32 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008 build
PASS: glibcs-mips64-linux-gnu-n32-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n32-soft build
PASS: glibcs-mips64-linux-gnu-n64 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008 build
PASS: glibcs-mips64-linux-gnu-n64-nan2008-soft build
PASS: glibcs-mips64-linux-gnu-n64-soft build
PASS: glibcs-mipsel-linux-gnu build
PASS: glibcs-mipsel-linux-gnu-nan2008 build
PASS: glibcs-mipsel-linux-gnu-nan2008-soft build
PASS: glibcs-mipsel-linux-gnu-soft build
PASS: glibcs-mips-linux-gnu build
PASS: glibcs-mips-linux-gnu-nan2008 build
PASS: glibcs-mips-linux-gnu-nan2008-soft build
PASS: glibcs-mips-linux-gnu-soft build
PASS: glibcs-nios2-linux-gnu build
PASS: glibcs-powerpc64le-linux-gnu build
PASS: glibcs-powerpc64-linux-gnu build
PASS: glibcs-tilegxbe-linux-gnu-32 build
PASS: glibcs-tilegxbe-linux-gnu build
PASS: glibcs-tilegx-linux-gnu-32 build
PASS: glibcs-tilegx-linux-gnu build
PASS: glibcs-tilepro-linux-gnu build
and the following build failures:
FAIL: glibcs-alpha-linux-gnu build
elf/sln is failed to link due to:
assertion fail bfd/elf64-alpha.c:4125
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-hppa-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
https://sourceware.org/bugzilla/show_bug.cgi?id=22537
FAIL: glibcs-ia64-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault]
FAIL: glibcs-powerpc-linux-gnu build
FAIL: glibcs-powerpc-linux-gnu-soft build
FAIL: glibcs-powerpc-linux-gnuspe build
FAIL: glibcs-powerpc-linux-gnuspe-e500v1 build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22264
FAIL: glibcs-powerpc-linux-gnu-power4 build
elf/sln is failed to link due to:
findlocale.c:96:(.text+0x22c): @local call to ifunc memchr
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-s390-linux-gnu build
elf/sln is failed to link due to:
collect2: fatal error: ld terminated with signal 11 [Segmentation fault], core dumped
assertion fail bfd/elflink.c:14299
This is caused by linker bug and/or non-PIC code in PIE libc.a.
FAIL: glibcs-sh3eb-linux-gnu build
FAIL: glibcs-sh3-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu build
FAIL: glibcs-sh4eb-linux-gnu-soft build
FAIL: glibcs-sh4-linux-gnu build
FAIL: glibcs-sh4-linux-gnu-soft build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
Also TLS code sequence in SH assembly syscalls in glibc doesn't match TLS
code sequence expected by ld:
https://sourceware.org/bugzilla/show_bug.cgi?id=22270
FAIL: glibcs-sparc64-linux-gnu build
FAIL: glibcs-sparcv9-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu build
FAIL: glibcs-tilegxbe-linux-gnu-32 build
FAIL: glibcs-tilegx-linux-gnu build
FAIL: glibcs-tilegx-linux-gnu-32 build
FAIL: glibcs-tilepro-linux-gnu build
elf/sln is failed to link due to:
ld: read-only segment has dynamic relocations.
This is caused by linker bug and/or non-PIC code in PIE libc.a. See:
https://sourceware.org/bugzilla/show_bug.cgi?id=22263
[BZ #19574]
* INSTALL: Regenerated.
* Makeconfig (real-static-start-installed-name): New.
(pic-default): Updated for --enable-static-pie.
(pie-default): New for --enable-static-pie.
(default-pie-ldflag): Likewise.
(+link-static-before-libc): Replace $(DEFAULT-LDFLAGS-$(@F))
with $(if $($(@F)-no-pie),$(no-pie-ldflag),$(default-pie-ldflag)).
Replace $(static-start-installed-name) with
$(real-static-start-installed-name).
(+prectorT): Updated for --enable-static-pie.
(+postctorT): Likewise.
(CFLAGS-.o): Add $(pie-default).
(CFLAGS-.op): Likewise.
* NEWS: Mention --enable-static-pie.
* config.h.in (ENABLE_STATIC_PIE): New.
* configure.ac (--enable-static-pie): New configure option.
(have-no-dynamic-linker): New LIBC_CONFIG_VAR.
(have-static-pie): Likewise.
Enable static PIE if linker supports --no-dynamic-linker.
(ENABLE_STATIC_PIE): New AC_DEFINE.
(enable-static-pie): New LIBC_CONFIG_VAR.
* configure: Regenerated.
* csu/Makefile (omit-deps): Add r$(start-installed-name) and
gr$(start-installed-name) for --enable-static-pie.
(extra-objs): Likewise.
(install-lib): Likewise.
(extra-objs): Add static-reloc.o and static-reloc.os
($(objpfx)$(start-installed-name)): Also depend on
$(objpfx)static-reloc.o.
($(objpfx)r$(start-installed-name)): New.
($(objpfx)g$(start-installed-name)): Also depend on
$(objpfx)static-reloc.os.
($(objpfx)gr$(start-installed-name)): New.
* csu/libc-start.c (LIBC_START_MAIN): Call _dl_relocate_static_pie
in libc.a.
* csu/libc-tls.c (__libc_setup_tls): Add main_map->l_addr to
initimage.
* csu/static-reloc.c: New file.
* elf/Makefile (routines): Add dl-reloc-static-pie.
(elide-routines.os): Likewise.
(DEFAULT-LDFLAGS-tst-tls1-static-non-pie): Removed.
(tst-tls1-static-non-pie-no-pie): New.
* elf/dl-reloc-static-pie.c: New file.
* elf/dl-support.c (_dl_get_dl_main_map): New function.
* elf/dynamic-link.h (ELF_DURING_STARTUP): Also check
STATIC_PIE_BOOTSTRAP.
* elf/get-dynamic-info.h (elf_get_dynamic_info): Likewise.
* gmon/Makefile (tests): Add tst-gmon-static-pie.
(tests-static): Likewise.
(DEFAULT-LDFLAGS-tst-gmon-static): Removed.
(tst-gmon-static-no-pie): New.
(CFLAGS-tst-gmon-static-pie.c): Likewise.
(CRT-tst-gmon-static-pie): Likewise.
(tst-gmon-static-pie-ENV): Likewise.
(tests-special): Likewise.
($(objpfx)tst-gmon-static-pie.out): Likewise.
(clean-tst-gmon-static-pie-data): Likewise.
($(objpfx)tst-gmon-static-pie-gprof.out): Likewise.
* gmon/tst-gmon-static-pie.c: New file.
* manual/install.texi: Document --enable-static-pie.
* sysdeps/generic/ldsodefs.h (_dl_relocate_static_pie): New.
(_dl_get_dl_main_map): Likewise.
* sysdeps/i386/configure.ac: Check if linker supports static PIE.
* sysdeps/x86_64/configure.ac: Likewise.
* sysdeps/i386/configure: Regenerated.
* sysdeps/x86_64/configure: Likewise.
* sysdeps/mips/Makefile (ASFLAGS-.o): Add $(pie-default).
(ASFLAGS-.op): Likewise.
Support added to identify Sparc M7/T7/S7/M8/T8 processor capability.
Performance tests run on Sparc S7 using new code and old niagara4 code.
Optimizations for memset also apply to bzero as they share code.
For memset/bzero, performance comparison with niagara4 code:
For memset nonzero data,
256-1023 bytes - 60-90% gain (in cache); 5% gain (out of cache)
1K+ bytes - 80-260% gain (in cache); 40-80% gain (out of cache)
For memset zero data (and bzero),
256-1023 bytes - 80-120% gain (in cache), 0% gain (out of cache)
1024+ bytes - 2-4x gain (in cache), 10-35% gain (out of cache)
Tested in sparcv9-*-* and sparc64-*-* targets in both multi and
non-multi arch configurations.
Patrick McGehearty <patrick.mcgehearty@oracle.com>
Adhemerval Zanella <adhemerval.zanella@linaro.org>
* sysdeps/sparc/sparc32/sparcv9/multiarch/Makefile
(sysdeps_routines): Add memset-niagara7.
* sysdeps/sparc/sparc64/multiarch/Makefile (sysdes_rotuines):
Likewise.
* sysdeps/sparc/sparc32/sparcv9/multiarch/memset-niagara7.S: New
file.
* sysdeps/sparc/sparc64/multiarch/memset-niagara7.S: Likewise.
* sysdeps/sparc/sparc64/multiarch/ifunc-impl-list.c
(__libc_ifunc_impl_list): Add __bzero_niagara7 and __memset_niagara7.
* sysdeps/sparc/sparc64/multiarch/ifunc-memset.h (IFUNC_SELECTOR):
Add niagara7 option.
* NEWS: Mention sparc m7 optimized memcpy, mempcpy, memmove, and
memset.
There is a configure option --without-fp that specifies that nofpu
sysdeps directories should be used instead of fpu directories.
For most glibc configurations, this option is of no use: either there
is no valid nofpu variant of that configuration, or there are no fpu
or nofpu sysdeps directories for that processor and so the option does
nothing. For a few configurations, if you are using a soft-float
compiler this option is required, and failing to use it generally
results in compilation errors from inline asm using unavailable
floating-point instructions.
We're moving away from --with-cpu to configuring glibc based on how
the compiler generates code, and it is natural to do so for
--without-fp as well; in most cases the soft-float and hard-float ABIs
are incompatible so you have no hope of building a working glibc with
an inappropriately configured compiler or libgcc.
This patch eliminates --without-fp, replacing it entirely by automatic
configuration based on the compiler. Configurations for which this is
relevant (coldfire / mips / powerpc32 / sh) define a variable
with_fp_cond in their preconfigure fragments (under the same
conditions under which those fragments do anything); this is a
preprocessor conditional which the toplevel configure script then uses
in a test to determine which sysdeps directories to use.
The config.make with-fp variable remains. It's used only by powerpc
(sysdeps/powerpc/powerpc32/Makefile) to add -mhard-float to various
flags variables. For powerpc, -mcpu= options can imply use of
soft-float. That could be an issue if you want to build for
e.g. 476fp, but are using --with-cpu=476 because there isn't a 476fp
sysdeps directory. If in future we eliminate --with-cpu and replace
it entirely by testing the compiler, it would be natural at that point
to eliminate that code as well (as the user should then just use a
compiler defaulting to 476fp and the 476 sysdeps directory would be
used automatically).
Tested for x86_64, and tested with build-many-glibcs.py that installed
shared libraries are unchanged by this patch.
* configure.ac (--with-fp): Remove configure option.
(with_fp_cond): New variable.
(libc_cv_with_fp): New configure test. Use this variable instead
of with_fp.
* configure: Regenerated.
* config.make.in (with-fp): Use @libc_cv_with_fp@.
* manual/install.texi (Configuring and compiling): Remove
--without-fp.
* INSTALL: Regenerated.
* sysdeps/m68k/preconfigure (with_fp_cond): Define for ColdFire.
* sysdeps/mips/preconfigure (with_fp_cond): Define.
* sysdeps/powerpc/preconfigure (with_fp_cond): Define for 32-bit.
* sysdeps/sh/preconfigure (with_fp_cond): Define.
* scripts/build-many-glibcs.py (Context.add_all_configs): Do not
use --without-fp to configure glibc.
On Skylake, bench-sinf reports performance improvement:
Before After Improvement
max 153.996 100.094 54%
min 8.546 6.852 25%
mean 18.1223 11.802 54%
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Add s_sinf-sse2 and s_sinf-fma.
(CFLAGS-s_sinf-fma.c): New.
* sysdeps/x86_64/fpu/multiarch/s_sinf-fma.c: New file.
* sysdeps/x86_64/fpu/multiarch/s_sinf-sse2.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_sinf.c: Likewise.
This patch continues filling out TS 18661-3 support by adding *f64 and
*f32x function aliases, supporting _Float64 and _Float32x, as aliases
for double functions. These types are supported for all glibc
configurations. The API corresponds exactly to that for _Float128 and
_Float64x. _Float32 aliases to float functions remain to be added in
subsequent patches to complete this process (then there are a few
miscellaneous functions in TS 18661-3 to implement that aren't simply
versions of existing functions for new types).
The patch enables the feature in bits/floatn-common.h, adds symbol
versions and documentation with updates to ABI baselines, and arranges
for the libm functions for the new types to be tested. As with the
_Float64x changes there are some x86 ulps updates because of header
inlines not used for the new types (and one other change to the
non-multiarch libm-test-ulps, which I suppose comes from using a
different compiler version / configuration from when it was last
regenerated).
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* bits/floatn-common.h (__HAVE_FLOAT64): Define to 1.
(__HAVE_FLOAT32X): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64
and _Float32x.
* math/Makefile (test-types): Add float64 and float32x.
* math/Versions (GLIBC_2.27): Add _Float64 and _Float32x
functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist:
Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
This adds system call wrappers for pkey_alloc, pkey_free, pkey_mprotect,
and x86-64 implementations of pkey_get and pkey_set, which abstract over
the PKRU CPU register and hide the actual number of memory protection
keys supported by the CPU. pkey_mprotect with a -1 key is implemented
using mprotect, so it will work even if the kernel does not support the
pkey_mprotect system call.
The system call wrapers use unsigned int instead of unsigned long for
parameters, so that no special treatment for x32 is needed. The flags
argument is currently unused, and the access rights bit mask is limited
to two bits by the current PKRU register layout anyway.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
There is a subtle non-determinism when building glibc.
This depends on whether the glibc is built using the distibuted
file intl/plural.c or built using the generated file intl/plural.c.
These two files (intl/plural.c generated vs. distributed) are slightly
different, hence we may end up with slightly different libraries.
Originally, having "bison" installed was optional. So if "bison" was
not present, we always built libraries with the distributed plural.c.
If bison was installed, we *** may have *** replaced the distributed
file plural.c with a new plural.c generated from plural.y. if the
timestamps triggered this rule:
plural.c plural.y
$(BISON) $(BISONFLAGS) $@ $^
Given that timestamps are not preserved in GIT repositories, the above
rule is not reliable without explicitly touching plural.c or plural.y.
In other words, the rule may or may not have fired.
In summary: there are two distinct sources of non-determinism:
1. Having "bison" installed or not
2. Having "bison" installed but timestamps poorly defined.
This patch fixes this by requiring "bison" being installed
and by always generating intl/plural.c from intl/plural.y.
(This is achieved by simply removing checked-in intl/plural.c)
[BZ #22432]
* configure.ac (BISON): Require to be present.
* configure: Regenerated.
* intl/Makefile (generated): Add plural.c.
[$(BISON) != no]: Make code unconditional.
(plural.c): Change rule to $(objpfx)plural.c.
($(objpfx)plural.o): Depend on $(objpfx)plural.c.
* intl/plural.c: Remove.
* manual/install.texi (Tools for Compilation): Document bison as
required.
* INSTALL: Regenerated.
This patch continues filling out TS 18661-3 support by adding *f64x
function aliases on platforms with _Float64x support. (It so happens
the set of such platforms is exactly the same as the set of platforms
with _Float128 support, although on x86_64, x86 and ia32 the _Float64x
format is Intel extended rather than binary128.) The API provided
corresponds exactly to that provided for _Float128, mostly coming from
TS 18661-3. As these functions always alias those for another type
(long double, _Float128 or both), __* function names are not provided,
as in other cases of alias types.
Given the preparation done in previous patches, this one just enables
the feature via Makeconfig and bits/floatn.h, adds symbol versions,
and updates documentation and ABI baselines. The symbol versions are
present unconditionally as GLIBC_2.27 in the relevant Versions files,
as it's OK for those to specify versions for functions that may not be
present in some configurations; no additional complexity is needed
unless in future some configuration gains support for this type that
didn't have such support in 2.27. The Makeconfig additions for ia64
and x86 aren't strictly needed, as those configurations also get
float64x-alias-fcts definitions from
sysdeps/ieee754/float128/Makeconfig, but still seem appropriate given
that _Float64x is not _Float128 for those configurations.
A libm-test-ulps update for x86 is included. This is because
bits/mathinline.h does not have _Float64x support added and for two
functions the use of out-of-line functions results in increased ulps
(ifloat64x shares ulps with ildouble / ifloat128 as appropriate).
Given that we'd like generally to eliminate bits/mathinline.h
optimizations, preferring to have such optimizations in GCC instead,
it seems reasonable not to add such support there for new types. GCC
support for _FloatN / _FloatNx built-in functions is limited, but has
been improved in GCC 8, and at some point I hope the full set of libm
built-in functions in GCC, and other optimizations with
per-floating-type aspects, will be enabled for all _FloatN / _FloatNx
types.
Tested for x86_64 and x86, and with build-many-glibcs.py, with both
GCC 6 and GCC 7.
* sysdeps/ia64/Makeconfig (float64x-alias-fcts): New variable.
* sysdeps/ieee754/float128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/ieee754/ldbl-128/Makeconfig (float64x-alias-fcts):
Likewise.
* sysdeps/x86/Makeconfig: New file.
* bits/floatn-common.h (__HAVE_FLOAT64X): Remove macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* bits/floatn.h (__HAVE_FLOAT64X): New macro.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ia64/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/ieee754/ldbl-128/bits/floatn.h (__HAVE_FLOAT64X):
Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/mips/ieee754/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/powerpc/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* sysdeps/x86/bits/floatn.h (__HAVE_FLOAT64X): Likewise.
(__HAVE_FLOAT64X_LONG_DOUBLE): Likewise.
* manual/math.texi (Mathematics): Document support for _Float64x.
* math/Versions (GLIBC_2.27): Add _Float64x functions.
* stdlib/Versions (GLIBC_2.27): Likewise.
* wcsmbs/Versions (GLIBC_2.27): Likewise.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist:
Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
The system call is somewhat obscure because it is closely related
to file descriptor sealing. However, it is also the recommended
way to create alias mappings, which is why it has more general use.
No emulation is provided. Except for the name of the
/proc/self/fd links, it would be possible to implement an
approximation using O_TMPFILE and tmpfs, but this does not appear
to be worth the added complexity.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
This patch, relative to a tree with
<https://sourceware.org/ml/libc-alpha/2017-11/msg00797.html> (pending
review) applied, obsoletes p_secstodate, making the underlying
function __p_secstodate into a compat symbol not available for new
binaries or ports. The calls in ns_print.c (part of incomplete
handling of TKEY) are changed to use %lu to print times instead of
trying to pretty-print the times any more.
Tested for x86_64.
* resolv/res_debug.c (p_secstodate): Condition definition on
[SHLIB_COMPAT (libresolv, GLIBC_2_0, GLIBC_2_27)]. Define
directly as __p_secstodate, and as a compat symbol. Do not use
libresolv_hidden_def.
* resolv/resolv.h (p_secstodate): Remove macro and function
declaration.
* resolv/ns_print.c (ns_sprintrrf): Print times with %lu, not
using p_secstodate.
* include/resolv.h (__p_secstodate): Do not use
libresolv_hidden_proto.
* resolv/Makefile (tests): Move tst-p_secstodate to ....
(tests-internal): ... here.
* resolv/tst-p_secstodate.c: Include <shlib-compat.h>. Condition
all contents on [TEST_COMPAT (libresolv, GLIBC_2_0, GLIBC_2_27)]
and declare and use __p_secstodate and use compat_symbol_reference
in that case.
[!TEST_COMPAT (libresolv, GLIBC_2_0, GLIBC_2_27)] (do_test): Add
implementation returning 77.
Update all sourceware links to https. The website redirects
everything to https anyway so let the web server do a bit less work.
The only reference that remains unchanged is the one in the old
ChangeLog, since it didn't seem worth changing it.
* NEWS: Update sourceware link to https.
* configure.ac: Likewise.
* crypt/md5test-giant.c: Likewise.
* dlfcn/bug-atexit1.c: Likewise.
* dlfcn/bug-atexit2.c: Likewise.
* localedata/README: Likewise.
* malloc/tst-mallocfork.c: Likewise.
* manual/install.texi: Likewise.
* nptl/tst-pthread-getattr.c: Likewise.
* stdio-common/tst-fgets.c: Likewise.
* stdio-common/tst-fwrite.c: Likewise.
* sunrpc/Makefile: Likewise.
* sysdeps/arm/armv7/multiarch/memcpy_impl.S: Likewise.
* wcsmbs/tst-mbrtowc2.c: Likewise.
* configure: Regenerate.
* INSTALL: Regenerate.
This commit adds a "subheaps" field to the malloc_info output that
shows the number of heaps that were allocated to extend a non-main
arena.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
res_hnok rejected some host names used on the Internet, such as
www-.example.com. res_hnok and res_dnok failed to perform basic syntax
checking on DNS domain names.
Also fix res_mailok, res_ownok.
This patch adds support for *f128 function aliases on platforms where
long double has the binary128 format (and thus GCC 7 provides the
_Float128 type with the same ABI as long double but as a distinct type
in terms of C type compatibility). This is the same API as provided
in glibc 2.26 for powerpc64le / x86_64 / x86 / ia64 where _Float128
has a different format from long double, with the bulk of the API
coming from TS 18661-3. All the functions alias the corresponding
long double functions, and __* function names are not provided since
those are only needed once for each floating-point format, not more
than once for different types with the same format (so for example,
-ffinite-math-only maps foof128 to __fool_finite, while type-generic
macros end up calling e.g. __issignalingl for _Float128 arguments on
such platforms).
The preparation for this feature was done in previous patches, so this
one just needs to add the relevant makefile and header definitions,
and update macro definitions of libm_alias_ldouble_other_r, to turn on
the feature, and update documentation and ABI baselines.
Tested (a) for x86_64, (b) for aarch64, (c) with build-many-glibcs.py
with both GCC 6 and GCC 7.
* sysdeps/ieee754/ldbl-128/Makeconfig: New file.
* sysdeps/ieee754/ldbl-128/bits/floatn.h: Likewise.
* sysdeps/ieee754/ldbl-128/float128-abi.h: Likewise.
* sysdeps/generic/libm-alias-ldouble.h: Include <bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128]
(libm_alias_ldouble_other_r): Also create _Float128 alias.
* sysdeps/ieee754/ldbl-opt/libm-alias-ldouble.h: Include
<bits/floatn.h>.
[__HAVE_FLOAT128 && !__HAVE_DISTINCT_FLOAT128]
(libm_alias_ldouble_other_r): Also create _Float128 alias.
* manual/math.texi (Mathematics): Document additional architecture
support for _Float128.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Update.
* sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise.
glibc has an add-ons mechanism to allow additional software to be
integrated into the glibc build. Such add-ons may be within the glibc
source tree, or outside it at a path passed to the --enable-add-ons
configure option.
localedata and crypt were once add-ons, distributed in separate
release tarballs, but long since stopped using that mechanism.
Linuxthreads was always an add-on. Ports spent some time as an add-on
with separate release tarballs, then was first moved into the glibc
source tree, then had its sysdeps files moved into the main sysdeps
hierarchy so the add-ons mechanism was no longer used. NPTL spent
some time as an add-on in the main glibc tree before stopping using
the add-on mechanism. libidn used to have separate release tarballs
but no longer does so, but still uses the add-ons mechanism within the
glibc source tree. Various other software has supported building with
the add-ons mechanism at times in the past, but I don't think any is
still widely used.
Add-ons involve significant, little-used complexity in the glibc build
system, and make it hard to understand what the space of possible
glibc configurations is. This patch removes the add-ons mechanism.
libidn is now built via the Subdirs mechanism to cause any
configuration using sysdeps/unix/inet to build libidn; HAVE_LIBIDN
(which effectively means shared libraries are available) is now
defined via sysdeps/unix/inet/configure. Various references to
add-ons around the source tree are removed (in the case of maint.texi,
the example list of sysdeps directories is still very out of date).
Externally maintained ports should now put their files in the normal
sysdeps directory structure rather than being arranged as add-ons;
they probably need to change e.g. elf.h anyway, rather than actually
being able to work just as a drop-in subtree. Hurd libpthread should
be arranged similarly to NPTL, so some files might go in a
hurd-pthreads (or similar) top-level directory in glibc, while sysdeps
files should go in the normal sysdeps directory structure (possibly in
hurd or hurd-pthreads subdirectories, just as there are nptl
subdirectories in the sysdeps tree).
Tested for x86_64, and with build-many-glibcs.py.
* configure.ac (--enable-add-ons): Remove option.
(machine): Do not mention add-ons in comment.
(LIBC_PRECONFIGURE): Likewise.
(add_ons): Remove variable and sanity checks and logic to locate
add-ons.
(add_ons_automatic): Remove variable.
(configured_add_ons): Likewise.
(add_ons_sfx): Likewise.
(add_ons_pfx): Likewise.
(add_on_subdirs): Likewise.
(sysnames_add_ons): Likewise. Remove loop over add-ons and
consideration of add-ons in Implies handling.
(sysdeps_add_ons): Likewise.
* configure: Regenerated.
* libidn/configure.ac: Remove.
* libidn/configure: Likewise.
* sysdeps/unix/inet/configure.ac: New file.
* sysdeps/unix/inet/configure: New generated file.
* sysdeps/unix/inet/Subdirs: Add libidn.
* Makeconfig (sysdeps-srcdirs): Remove variable.
(+sysdep_dirs): Do not include $(sysdeps-srcdirs).
($(common-objpfx)config.status): Do not depend on add-on files.
($(common-objpfx)shlib-versions.v.i): Do not mention add-ons in
comment.
(all-subdirs): Do not include $(add-on-subdirs).
* Makefile (dist-prepare): Do not use $(sysdeps-add-ons).
* config.make.in (add-ons): Remove variable.
(add-on-subdirs): Likewise.
(sysdeps-add-ons): Likewise.
* manual/Makefile (add-chapters): Remove.
($(objpfx)texis): Do not depend on $(add-chapters).
(nonexamples): Do not handle $(add-chapters).
(examples): Do not handle $(add-ons).
(chapters.% top-menu.%): Do not pass '$(add-chapters)' to
libc-texinfo.sh.
* manual/install.texi (Installation): Do not mention add-ons.
(--enable-add-ons): Do not document configure option.
* INSTALL: Regenerated.
* manual/libc-texinfo.sh: Do not handle $2 add-ons argument.
* manual/maint.texi (Hierarchy Conventions): Do not mention
add-ons.
* scripts/build-many-glibcs.py (Glibc.build_glibc): Do not use
--enable-add-ons.
* scripts/gen-sorted.awk: Do not handle Subdirs files from
add-ons.
* scripts/test-installation.pl: Do not handle glibc-compat add-on.
* sysdeps/nptl/Makeconfig: Do not mention add-ons in comment.
without wrapper on aarch64:
powf reciprocal-throughput: 4.2x faster
powf latency: 2.6x faster
old worst-case error: 1.11 ulp
new worst-case error: 0.82 ulp
aarch64 .text size: -780 bytes
aarch64 .rodata size: +144 bytes
powf(x,y) is implemented as exp2(y*log2(x)) with the same algorithms
that are used in exp2f and log2f, except that the log2f polynomial is
larger for extra precision and its output (and exp2f input) may be
scaled by a power of 2 (POWF_SCALE) to simplify the argument reduction
step of exp2 (possible when efficient round and convert toint operation
is available).
The special case handling tries to minimize the checks in the hot path.
When the input of exp2_inline is checked, int arithmetics is used as
that was faster on the tested aarch64 cores.
* math/Makefile (type-float-routines): Add e_powf_log2_data.
* sysdeps/ieee754/flt-32/e_powf.c: New implementation.
* sysdeps/ieee754/flt-32/e_powf_log2_data.c: New file.
* sysdeps/ieee754/flt-32/math_config.h (__powf_log2_data): Define.
(issignalingf_inline): Likewise.
(POWF_LOG2_TABLE_BITS): Likewise.
(POWF_LOG2_POLY_ORDER): Likewise.
(POWF_SCALE_BITS): Likewise.
(POWF_SCALE): Likewise.
* sysdeps/i386/fpu/e_powf_log2_data.c: New file.
* sysdeps/ia64/fpu/e_powf_log2_data.c: New file.
* sysdeps/m68k/m680x0/fpu/e_powf_log2_data.c: New file.
Similar to the new logf: double precision arithmetics and a small
lookup table is used. The argument reduction step is the same as in
the new logf.
without wrapper on aarch64:
log2f reciprocal-throughput: 2.3x faster
log2f latency: 2.1x faster
old worst case error: 1.72 ulp
new worst case error: 0.75 ulp
aarch64 .text size: -252 bytes
aarch64 .rodata size: +244 bytes
* math/Makefile (type-float-routines): Add e_log2f_data.
* sysdeps/ieee754/flt-32/e_log2f.c: New implementation.
* sysdeps/ieee754/flt-32/e_log2f_data.c: New file.
* sysdeps/ieee754/flt-32/math_config.h (__log2f_data): Define.
(LOG2F_TABLE_BITS, LOG2F_POLY_ORDER): Define.
* sysdeps/i386/fpu/e_log2f_data.c: New file.
* sysdeps/ia64/fpu/e_log2f_data.c: New file.
* sysdeps/m68k/m680x0/fpu/e_log2f_data.c: New file.
without wrapper on aarch64:
logf reciprocal-throughput: 2.2x faster
logf latency: 1.9x faster
old worst case error: 0.89 ulp
new worst case error: 0.82 ulp
aarch64 .text size: -356 bytes
aarch64 .rodata size: +240 bytes
Uses double precision arithmetics and a lookup table to allow smaller
polynomial and avoid the use of division.
Data is in a separate translation unit with fixed layout to prevent the
compiler generating suboptimal literal access.
Errors are handled inline according to POSIX rules, but this patch
keeps the wrapper with SVID compatible error handling.
Needs libm-test-ulps adjustment for clogf in non-nearest rounding mode.
* math/Makefile (type-float-routines): Add e_logf_data.
* sysdeps/ieee754/flt-32/e_logf.c: New implementation.
* sysdeps/ieee754/flt-32/e_logf_data.c: New file.
* sysdeps/ieee754/flt-32/math_config.h (__logf_data): Define.
(LOGF_TABLE_BITS, LOGF_POLY_ORDER): Define.
* sysdeps/i386/fpu/e_logf_data.c: New file.
* sysdeps/ia64/fpu/e_logf_data.c: New file.
* sysdeps/m68k/m680x0/fpu/e_logf_data.c: New file.
Based on new expf and exp2f code from
https://github.com/ARM-software/optimized-routines/
with wrapper on aarch64:
expf reciprocal-throughput: 2.3x faster
expf latency: 1.7x faster
without wrapper on aarch64:
expf reciprocal-throughput: 3.3x faster
expf latency: 1.7x faster
without wrapper on aarch64:
exp2f reciprocal-throughput: 2.8x faster
exp2f latency: 1.3x faster
libm.so size on aarch64:
.text size: -152 bytes
.rodata size: -1740 bytes
expf/exp2f worst case nearest rounding error: 0.502 ulp
worst case non-nearest rounding error: 1 ulp
Error checks are inline and errno setting is in separate tail called
functions, but the wrappers are kept in this patch to handle the
_LIB_VERSION==_SVID_ case. (So e.g. errno is set twice for expf calls
and once for __expf_finite calls on targets where the new code is used.)
Double precision arithmetics is used which is expected to be faster on
most targets (including soft-float) than using single precision and it
is easier to get good precision result with it.
Const data is kept in a separate translation unit which complicates
maintenance a bit, but is expected to give good code for literal loads
on most targets and allows sharing data across expf, exp2f and powf.
(This data is disabled on i386, m68k and ia64 which have their own
expf, exp2f and powf code.)
Some details may need target specific tweaks:
- best convert and round to int operation in the arg reduction may be
different across targets.
- code was optimized on fma target, optimal polynomial eval may be
different without fma.
- gcc does not always generate good code for fp bit representation
access via unions or it may be inherently slow on some targets.
The libm-test-ulps will need adjustment because..
- The argument reduction ideally uses nearest rounded rint, but that is
not efficient on most targets, so the polynomial can get evaluated on a
wider interval in non-nearest rounding mode making 1 ulp errors common
in that case.
- The polynomial is evaluated such that it may have 1 ulp error on
negative tiny inputs with upward rounding.
* math/Makefile (type-float-routines): Add math_errf and e_exp2f_data.
* sysdeps/aarch64/fpu/math_private.h (TOINT_INTRINSICS): Define.
(roundtoint, converttoint): Likewise.
* sysdeps/ieee754/flt-32/e_expf.c: New implementation.
* sysdeps/ieee754/flt-32/e_exp2f.c: New implementation.
* sysdeps/ieee754/flt-32/e_exp2f_data.c: New file.
* sysdeps/ieee754/flt-32/math_config.h: New file.
* sysdeps/ieee754/flt-32/math_errf.c: New file.
* sysdeps/ieee754/flt-32/t_exp2f.h: Remove.
* sysdeps/i386/fpu/e_exp2f_data.c: New file.
* sysdeps/i386/fpu/math_errf.c: New file.
* sysdeps/ia64/fpu/e_exp2f_data.c: New file.
* sysdeps/ia64/fpu/math_errf.c: New file.
* sysdeps/m68k/m680x0/fpu/e_exp2f_data.c: New file.
* sysdeps/m68k/m680x0/fpu/math_errf.c: New file.
This patch adds SSE4.1 versions of trunc and truncf, using the roundsd
/ roundss instructions, similar to the versions of ceil, floor, rint
and nearbyint functions we already have. In my testing with the glibc
benchtests these are about 30% faster than the C versions for double,
20% faster for float.
Tested for x86_64.
[BZ #20142]
* sysdeps/x86_64/fpu/multiarch/Makefile (libm-sysdep_routines):
Add s_trunc-c, s_truncf-c, s_trunc-sse4_1 and s_truncf-sse4_1.
* sysdeps/x86_64/fpu/multiarch/s_trunc-c.c: New file.
* sysdeps/x86_64/fpu/multiarch/s_trunc-sse4_1.S: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_trunc.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_truncf-c.c: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_truncf-sse4_1.S: Likewise.
* sysdeps/x86_64/fpu/multiarch/s_truncf.c: Likewise.
This patch obsoletes the pow10, pow10f and pow10l functions (makes
them into compat symbols, not available for new ports or static
linking). The exp10 names for these functions are standardized (in TS
18661-4) and were added in the same glibc version (2.1) as pow10 so
source code can change to use them without any loss of portability.
Since pow10 is deliberately not provided for _Float128, only exp10,
this slightly simplifies moving to the new wrapper templates in the
!LIBM_SVID_COMPAT case, by avoiding needing to arrange for pow10,
pow10f and pow10l to be defined by those templates.
Tested for x86_64, and with build-many-glibcs.py.
* manual/math.texi (pow10): Do not document.
(pow10f): Likewise.
(pow10l): Likewise.
* math/bits/mathcalls.h [__USE_GNU] (pow10): Do not declare.
* math/bits/math-finite.h [__USE_GNU] (pow10): Likewise.
* math/libm-test-exp10.inc (pow10_test): Remove.
(do_test): Do not call pow10.
* math/w_exp10_compat.c (pow10): Make into compat symbol.
[NO_LONG_DOUBLE] (pow10l): Likewise.
* math/w_exp10f_compat.c (pow10f): Likewise.
* math/w_exp10l_compat.c (pow10l): Likewise.
* sysdeps/ia64/fpu/e_exp10.S: Include <shlib-compat.h>.
(pow10): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10f.S: Include <shlib-compat.h>.
(pow10f): Make into compat symbol.
* sysdeps/ia64/fpu/e_exp10l.S: Include <shlib-compat.h>.
(pow10l): Make into compat symbol.
* sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Remove
pow10.
(CFLAGS-nldbl-pow10.c): Remove variable..
* sysdeps/ieee754/ldbl-opt/nldbl-pow10.c: Remove file.
* sysdeps/ieee754/ldbl-opt/w_exp10_compat.c (pow10l): Condition on
[SHLIB_COMPAT (libm, GLIBC_2_1, GLIBC_2_27)].
* sysdeps/ieee754/ldbl-opt/w_exp10l_compat.c (compat_symbol):
Undefine and redefine.
(pow10l): Make into compat symbol.
* sysdeps/aarch64/libm-test-ulps: Remove pow10 ulps.
* sysdeps/alpha/fpu/libm-test-ulps: Likewise.
* sysdeps/arm/libm-test-ulps: Likewise.
* sysdeps/hppa/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/fpu/libm-test-ulps: Likewise.
* sysdeps/i386/i686/fpu/multiarch/libm-test-ulps: Likewise.
* sysdeps/microblaze/libm-test-ulps: Likewise.
* sysdeps/mips/mips32/libm-test-ulps: Likewise.
* sysdeps/mips/mips64/libm-test-ulps: Likewise.
* sysdeps/nios2/libm-test-ulps: Likewise.
* sysdeps/powerpc/fpu/libm-test-ulps: Likewise.
* sysdeps/powerpc/nofpu/libm-test-ulps: Likewise.
* sysdeps/s390/fpu/libm-test-ulps: Likewise.
* sysdeps/sh/libm-test-ulps: Likewise.
* sysdeps/sparc/fpu/libm-test-ulps: Likewise.
* sysdeps/tile/libm-test-ulps: Likewise.
* sysdeps/x86_64/fpu/libm-test-ulps: Likewise.
This patch completes the ucontext.h namespace fixes by fixing issues
related to the use of struct sigcontext as mcontext_t, and inclusion
of <bits/sigcontext.h> even when struct sigcontext is not so used.
Inclusion of <bits/sigcontext.h> by <sys/ucontext.h> is removed; the
way to get the sigcontext structure is by including <signal.h> (in a
context where __USE_MISC is defined); the sysdeps/generic version of
sys/ucontext.h keeps the inclusion by necessity, with a comment about
how this is not namespace-clean, but the only configuration that used
it, MicroBlaze, gets its own version of the header in this patch.
Where mcontext_t was typedefed to struct sigcontext, the contents of
struct sigcontext are inserted (with appropriate namespace handling to
prefix fields with __ when __USE_MISC is not defined); review should
check that this has been done correctly in each case, whether the
definition of struct sigcontext comes from glibc headers or from the
Linux kernel. This changes C++ name mangling on affected
architectures (which do not include x86_64/x86).
Tested for x86_64, and with build-many-glibcs.py.
2017-08-14 Joseph Myers <joseph@codesourcery.com>
[BZ #21457]
* sysdeps/arm/sys/ucontext.h: Do not include <bits/sigcontext.h>.
* sysdeps/generic/sys/ucontext.h: Add comment about use of struct
sigcontext and namespace requirements.
* sysdeps/i386/sys/ucontext.h: Do not include <bits/sigcontext.h>.
* sysdeps/m68k/sys/ucontext.h: Likewise.
* sysdeps/mips/sys/ucontext.h: Likewise. Include <bits/types.h>.
* sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/aarch64/ucontext_i.sym (oEXTENSION): Use
__glibc_reserved1 instead of __reserved.
* sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/alpha/ucontext-offsets.sym: Use
mcontext_t instead of struct sigcontext.
* sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/ia64/makecontext.c (__makecontext): Use
mcontext_t instead of struct sigcontext.
* sysdeps/unix/sysv/linux/ia64/sigcontext-offsets.sym: Use
mcontext_t instead of struct sigcontext.
* sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): New macro.
(struct __ia64_fpreg_mcontext): New type.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
(_SC_GR0_OFFSET): Use mcontext_t instead of struct sigcontext.
(uc_sigmask): Define using __ctx.
(uc_stack): Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/procfs.h: Include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/microblaze/sys/ucontext.h: New file.
* sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
* sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Do not include
<bits/sigcontext.h>.
(__ctx): Define earlier.
(mcontext_t): Define structure contents rather than using struct
sigcontext.
* sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Do not include
<bits/sigcontext.h>. Include <bits/types.h>.
* conform/Makefile (test-xfail-XPG42/signal.h/conform): Remove.
(test-xfail-XPG42/sys/wait.h/conform): Likewise.
(test-xfail-XPG42/ucontext.h/conform): Likewise.
(test-xfail-UNIX98/signal.h/conform): Likewise.
(test-xfail-UNIX98/sys/wait.h/conform): Likewise.
(test-xfail-UNIX98/ucontext.h/conform): Likewise.
(test-xfail-XOPEN2K/signal.h/conform): Likewise.
(test-xfail-XOPEN2K/sys/wait.h/conform): Likewise.
(test-xfail-XOPEN2K/ucontext.h/conform): Likewise.
(test-xfail-POSIX2008/signal.h/conform): Likewise.
(test-xfail-POSIX2008/sys/wait.h/conform): Likewise.
(test-xfail-XOPEN2K8/signal.h/conform): Likewise.
(test-xfail-XOPEN2K8/sys/wait.h/conform): Likewise.
This patch obsoletes support for SVID libm error handling (the system
where a user-defined function matherr is called on a libm function
error; only enabled if you also set _LIB_VERSION = _SVID_ or
_LIB_VERSION = _XOPEN_) and the use of the _LIB_VERSION global
variable to control libm error handling. matherr and _LIB_VERSION are
made into compat symbols, not supported for new ports or for static
linking. The libieee.a object file (which sets _LIB_VERSION = _IEEE_,
so disabling errno setting for some functions) is also removed, and
all the related definitions are removed from math.h.
The manual already recommends against using matherr, and it's already
not supported for _Float128 functions (those use new wrappers that
don't support matherr, only errno) - this patch means that it becomes
possible to e.g. add sinf32 as an alias to sinf without that resulting
in undesired matherr support in sinf32 for existing glibc ports.
matherr support is not part of any standard supported by glibc (it was
removed in XPG4).
Because matherr is a function to be defined by the user, of course
user programs defining such a function will still continue to link; it
just quietly won't be used. If they try to write to the library's
copy of _LIB_VERSION to enable SVID error handling, however, they will
get a link error (but if they define their own _LIB_VERSION variable,
they won't).
I expect the most likely case of build failures from this patch to be
programs with unconditional cargo-culted uses of -lieee (based on a
notion of "I want IEEE floating point", not any actual requirement for
that library).
Ideally, the new-port-or-static-linking case would use the new
wrappers used for _Float128. This is not implemented in this patch,
because of the complication of architecture-specific (powerpc32 and
sparc) sqrt wrappers that use _LIB_VERSION and __kernel_standard
directly. Thus, the old wrappers and __kernel_standard are still
built unconditionally, and _LIB_VERSION still exists in static libm.
But when the old wrappers and __kernel_standard are built in the
non-compat case, _LIB_VERSION and matherr are defined as macros so
code to support those features isn't actually built into static libm
or new ports' shared libm after this patch.
I intend to move to the new wrappers for static libm and new ports in
followup patches. I believe the sqrt wrappers for powerpc32 and sparc
can reasonably be removed. GCC already optimizes the normal case of
sqrt by generating code that uses a hardware instruction and only
calls the sqrt function if the argument was negative (if
-fno-math-errno, of course, it just uses the hardware instruction
without any check for negative argument being needed). Thus those
wrappers will only actually get called in the case of negative
arguments, which is not a case it makes sense to optimize for. But
even without removing the powerpc32 and sparc wrappers it should still
be possible to move to the new wrappers for static libm and new ports,
just without having those dubious architecture-specific optimizations
in static libm.
Everything said about matherr equally applies to matherrf and matherrl
(IA64-specific, undocumented), except that the structure of IA64 libm
means it won't be converted to using the new wrappers (it doesn't use
the old ones either, but its own error-handling code instead).
As with other tests of compat symbols, I expect test-matherr and
test-matherr-2 to need to become appropriately conditional once we
have a system for disabling such tests for ports too new to have the
relevant symbols.
Tested for x86_64 and x86, and with build-many-glibcs.py.
* math/math.h [__USE_MISC] (_LIB_VERSION_TYPE): Remove.
[__USE_MISC] (_LIB_VERSION): Likewise.
[__USE_MISC] (struct exception): Likewise.
[__USE_MISC] (matherr): Likewise.
[__USE_MISC] (DOMAIN): Likewise.
[__USE_MISC] (SING): Likewise.
[__USE_MISC] (OVERFLOW): Likewise.
[__USE_MISC] (UNDERFLOW): Likewise.
[__USE_MISC] (TLOSS): Likewise.
[__USE_MISC] (PLOSS): Likewise.
[__USE_MISC] (HUGE): Likewise.
[__USE_XOPEN] (MAXFLOAT): Define even if [__USE_MISC].
* math/math-svid-compat.h: New file.
* conform/linknamespace.pl (@whitelist): Remove matherr, matherrf
and matherrl.
* include/math.h [!_ISOMAC] (__matherr): Remove.
* manual/arith.texi (FP Exceptions): Do not document matherr.
* math/Makefile (tests): Change test-matherr to test-matherr-3.
(tests-internal): New variable.
(install-lib): Do not add libieee.a.
(non-lib.a): Likewise.
(extra-objs): Do not add libieee.a and ieee-math.o.
(CPPFLAGS-s_lib_version.c): Remove variable.
($(objpfx)libieee.a): Remove rule.
($(addprefix $(objpfx), $(tests-internal)): Depend on $(libm).
* math/ieee-math.c: Remove.
* math/libm-test-support.c (matherr): Remove.
* math/test-matherr.c: Use <support/test-driver.c>. Add copyright
and license notices. Include <math-svid-compat.h> and
<shlib-compat.h>.
(matherr): Undefine as macro. Use compat_symbol_reference.
(_LIB_VERSION): Likewise.
* math/test-matherr-2.c: New file.
* math/test-matherr-3.c: Likewise.
* sysdeps/generic/math_private.h (__kernel_standard): Remove
declaration.
(__kernel_standard_f): Likewise.
(__kernel_standard_l): Likewise.
* sysdeps/ieee754/s_lib_version.c: Do not include <math.h> or
<math_private.h>. Include <math-svid-compat.h>.
(_LIB_VERSION): Undefine as macro.
(_LIB_VERSION_INTERNAL): Always initialize to _POSIX_. Define
only if [LIBM_SVID_COMPAT || !defined SHARED]. If
[LIBM_SVID_COMPAT], use compat_symbol.
* sysdeps/ieee754/s_matherr.c: Do not include <math.h> or
<math_private.h>. Include <math-svid-compat.h>.
(matherr): Undefine as macro.
(__matherr): Define only if [LIBM_SVID_COMPAT]. Use
compat_symbol.
* sysdeps/ia64/fpu/libm_error.c: Include <math-svid-compat.h>.
[_LIBC && LIBM_SVID_COMPAT] (matherrf): Use
compat_symbol_reference.
[_LIBC && LIBM_SVID_COMPAT] (matherrl): Likewise.
[_LIBC && !LIBM_SVID_COMPAT] (matherrf): Define as macro.
[_LIBC && !LIBM_SVID_COMPAT] (matherrl): Likewise.
* sysdeps/ia64/fpu/libm_support.h: Include <math-svid-compat.h>.
(MATHERR_D): Remove declaration.
[!_LIBC] (_LIB_VERSION_TYPE): Likewise
[!LIBM_BUILD] (_LIB_VERSIONIMF): Likewise.
[LIBM_BUILD] (pmatherrf): Likewise.
[LIBM_BUILD] (pmatherr): Likewise.
[LIBM_BUILD] (pmatherrl): Likewise.
(DOMAIN): Likewise.
(SING): Likewise.
(OVERFLOW): Likewise.
(UNDERFLOW): Likewise.
(TLOSS): Likewise.
(PLOSS): Likewise.
* sysdeps/ia64/fpu/s_matherrf.c: Include <math-svid-compat.h>.
(__matherrf): Define only if [LIBM_SVID_COMPAT]. Use
compat_symbol.
* sysdeps/ia64/fpu/s_matherrl.c: Include <math-svid-compat.h>.
(__matherrl): Define only if [LIBM_SVID_COMPAT]. Use
compat_symbol.
* math/lgamma-compat.h: Include <math-svid-compat.h>.
* math/w_acos_compat.c: Likewise.
* math/w_acosf_compat.c: Likewise.
* math/w_acosh_compat.c: Likewise.
* math/w_acoshf_compat.c: Likewise.
* math/w_acoshl_compat.c: Likewise.
* math/w_acosl_compat.c: Likewise.
* math/w_asin_compat.c: Likewise.
* math/w_asinf_compat.c: Likewise.
* math/w_asinl_compat.c: Likewise.
* math/w_atan2_compat.c: Likewise.
* math/w_atan2f_compat.c: Likewise.
* math/w_atan2l_compat.c: Likewise.
* math/w_atanh_compat.c: Likewise.
* math/w_atanhf_compat.c: Likewise.
* math/w_atanhl_compat.c: Likewise.
* math/w_cosh_compat.c: Likewise.
* math/w_coshf_compat.c: Likewise.
* math/w_coshl_compat.c: Likewise.
* math/w_exp10_compat.c: Likewise.
* math/w_exp10f_compat.c: Likewise.
* math/w_exp10l_compat.c: Likewise.
* math/w_exp2_compat.c: Likewise.
* math/w_exp2f_compat.c: Likewise.
* math/w_exp2l_compat.c: Likewise.
* math/w_fmod_compat.c: Likewise.
* math/w_fmodf_compat.c: Likewise.
* math/w_fmodl_compat.c: Likewise.
* math/w_hypot_compat.c: Likewise.
* math/w_hypotf_compat.c: Likewise.
* math/w_hypotl_compat.c: Likewise.
* math/w_j0_compat.c: Likewise.
* math/w_j0f_compat.c: Likewise.
* math/w_j0l_compat.c: Likewise.
* math/w_j1_compat.c: Likewise.
* math/w_j1f_compat.c: Likewise.
* math/w_j1l_compat.c: Likewise.
* math/w_jn_compat.c: Likewise.
* math/w_jnf_compat.c: Likewise.
* math/w_jnl_compat.c: Likewise.
* math/w_lgamma_main.c: Likewise.
* math/w_lgamma_r_compat.c: Likewise.
* math/w_lgammaf_main.c: Likewise.
* math/w_lgammaf_r_compat.c: Likewise.
* math/w_lgammal_main.c: Likewise.
* math/w_lgammal_r_compat.c: Likewise.
* math/w_log10_compat.c: Likewise.
* math/w_log10f_compat.c: Likewise.
* math/w_log10l_compat.c: Likewise.
* math/w_log2_compat.c: Likewise.
* math/w_log2f_compat.c: Likewise.
* math/w_log2l_compat.c: Likewise.
* math/w_log_compat.c: Likewise.
* math/w_logf_compat.c: Likewise.
* math/w_logl_compat.c: Likewise.
* math/w_pow_compat.c: Likewise.
* math/w_powf_compat.c: Likewise.
* math/w_powl_compat.c: Likewise.
* math/w_remainder_compat.c: Likewise.
* math/w_remainderf_compat.c: Likewise.
* math/w_remainderl_compat.c: Likewise.
* math/w_scalb_compat.c: Likewise.
* math/w_scalbf_compat.c: Likewise.
* math/w_scalbl_compat.c: Likewise.
* math/w_sinh_compat.c: Likewise.
* math/w_sinhf_compat.c: Likewise.
* math/w_sinhl_compat.c: Likewise.
* math/w_sqrt_compat.c: Likewise.
* math/w_sqrtf_compat.c: Likewise.
* math/w_sqrtl_compat.c: Likewise.
* math/w_tgamma_compat.c: Likewise.
* math/w_tgammaf_compat.c: Likewise.
* math/w_tgammal_compat.c: Likewise.
* sysdeps/ieee754/dbl-64/w_exp_compat.c: Likewise.
* sysdeps/ieee754/flt-32/w_expf_compat.c: Likewise.
* sysdeps/ieee754/k_standard.c: Likewise.
* sysdeps/ieee754/k_standardf.c: Likewise.
* sysdeps/ieee754/k_standardl.c: Likewise.
* sysdeps/ieee754/ldbl-128/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-128ibm/w_expl_compat.c: Likewise.
* sysdeps/ieee754/ldbl-96/w_expl_compat.c: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power4/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/powerpc/powerpc32/power5/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc32/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc32/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrt_compat-vis3.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/w_sqrtf_compat-vis3.S:
Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc32/sparcv9/fpu/w_sqrtf_compat.S: Likewise.
* sysdeps/sparc/sparc64/fpu/w_sqrt_compat.S: Likewise.
* sysdeps/sparc/sparc64/fpu/w_sqrtf_compat.S: Likewise.
Remove enum __ptrace_flags along with the only constant it contains,
PTRACE_SEIZE_DEVEL, from Linux's sys/ptrace.h files.
This temporary development constant shouldn't have been added to
sys/ptrace.h in the first place. It was introduced in Linux by commit
v3.1-rc1~308^2~28 as a temporary part of new experimental PTRACE_SEIZE
interface. Later, as PTRACE_SEIZE stabilized and lost its experimental
status, this flag was removed from Linux by commit v3.4-rc1~109^2~20.
* sysdeps/unix/sysv/linux/sys/ptrace.h (enum __ptrace_flags,
PTRACE_SEIZE_DEVEL): Remove.
* sysdeps/unix/sysv/linux/aarch64/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/ia64/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/powerpc/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/s390/sys/ptrace.h: Likewise.
* sysdeps/unix/sysv/linux/sparc/sys/ptrace.h: Likewise.
