_wide_data and _mode are not available in legacy code, so do not attempt
to free the wide backup buffer in legacy code.
Resolves: BZ #32137 and BZ #27821
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit ae4d44b1d5)
The reading loops did not check for read failures. Addresses
a static analysis report.
Manually tested by compiling a program with the GCC's
-finstrument-functions option, running it with
“LD_PRELOAD=debug/libpcprofile.so PCPROFILE_OUTPUT=output-file”,
and reviewing the output of “debug/pcprofiledump output-file”.
(cherry picked from commit 89b088bf70)
The old code used l_init_called as an indicator for whether TLS
initialization was complete. However, it is possible that
TLS for an object is initialized, written to, and then dlopen
for this object is called again, and l_init_called is not true at
this point. Previously, this resulted in TLS being initialized
twice, discarding any interim writes (technically introducing a
use-after-free bug even).
This commit introduces an explicit per-object flag, l_tls_in_slotinfo.
It indicates whether _dl_add_to_slotinfo has been called for this
object. This flag is used to avoid double-initialization of TLS.
In update_tls_slotinfo, the first_static_tls micro-optimization
is removed because preserving the initalization flag for subsequent
use by the second loop for static TLS is a bit complicated, and
another per-object flag does not seem to be worth it. Furthermore,
the l_init_called flag is dropped from the second loop (for static
TLS initialization) because l_need_tls_init on its own prevents
double-initialization.
The remaining l_init_called usage in resize_scopes and update_scopes
is just an optimization due to the use of scope_has_map, so it is
not changed in this commit.
The isupper check ensures that libc.so.6 is TLS is not reverted.
Such a revert happens if l_need_tls_init is not cleared in
_dl_allocate_tls_init for the main_thread case, now that
l_init_called is not checked anymore in update_tls_slotinfo
in elf/dl-open.c.
Reported-by: Jonathon Anderson <janderson@rice.edu>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 5097cd344f)
Also remove an outdated comment: _dl_allocate_tls_init is
called as part of pthread_create.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit fe06fb313b)
Remove local FAIL macro in favor to FAIL_EXIT1 from <support/check.h>,
which provides equivalent reporting, with the name of the file and the
line number within of the failure site additionally included. Remove
FAIL_ERR altogether and include ": %m" explicitly with the format string
supplied to FAIL_EXIT1 as there seems little value to have a separate
macro just for this.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 8c98195af6)
Remove local FAIL macro in favor to FAIL_RET from <support/check.h>,
which provides equivalent reporting, with the name of the file of the
failure site additionally included, for the tst-truncate-common core
shared between the tst-truncate and tst-truncate64 tests.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit fe47595504)
If a file descriptor is left unclosed and is cleaned up by _IO_cleanup
on exit, its backup buffer remains unfreed, registering as a leak in
valgrind. This is not strictly an issue since (1) the program should
ideally be closing the stream once it's not in use and (2) the program
is about to exit anyway, so keeping the backup buffer around a wee bit
longer isn't a real problem. Free it anyway to keep valgrind happy
when the streams in question are the standard ones, i.e. stdout, stdin
or stderr.
Also, the _IO_have_backup macro checks for _IO_save_base,
which is a roundabout way to check for a backup buffer instead of
directly looking for _IO_backup_base. The roundabout check breaks when
the main get area has not been used and user pushes a char into the
backup buffer with ungetc. Fix this to use the _IO_backup_base
directly.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit 3e1d8d1d1d)
When ungetc is called on an unused stream, the backup buffer is
allocated without the main get area being present. This results in
every subsequent ungetc (as the stream remains in the backup area)
checking uninitialized memory in the backup buffer when trying to put a
character back into the stream.
Avoid comparing the input character with buffer contents when in backup
to avoid this uninitialized read. The uninitialized read is harmless in
this context since the location is promptly overwritten with the input
character, thus fulfilling ungetc functionality.
Also adjust wording in the manual to drop the paragraph that says glibc
cannot do multiple ungetc back to back since with this change, ungetc
can actually do this.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
(cherry picked from commit cdf0f88f97)
Complement commit b03e4d7bd2 ("stdio: fix vfscanf with matches longer
than INT_MAX (bug 27650)") and add a test case for the issue, inspired
by the reproducer provided with the bug report.
This has been verified to succeed as from the commit referred and fail
beforehand.
As the test requires 2GiB of data to be passed around its performance
has been evaluated using a choice of systems and the execution time
determined to be respectively in the range of 9s for POWER9@2.166GHz,
24s for FU740@1.2GHz, and 40s for 74Kf@950MHz. As this is on the verge
of and beyond the default timeout it has been increased by the factor of
8. Regardless, following recent practice the test has been added to the
standard rather than extended set.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 89cddc8a70)
Add a FAIL test failure helper analogous to FAIL_RET, that does not
cause the current function to return, providing a standardized way to
report a test failure with a message supplied while permitting the
caller to continue executing, for further reporting, cleaning up, etc.
Update existing test cases that provide a conflicting definition of FAIL
by removing the local FAIL definition and then as follows:
- tst-fortify-syslog: provide a meaningful message in addition to the
file name already added by <support/check.h>; 'support_record_failure'
is already called by 'support_print_failure_impl' invoked by the new
FAIL test failure helper.
- tst-ctype: no update to FAIL calls required, with the name of the file
and the line number within of the failure site additionally included
by the new FAIL test failure helper, and error counting plus count
reporting upon test program termination also already provided by
'support_record_failure' and 'support_report_failure' respectively,
called by 'support_print_failure_impl' and 'adjust_exit_status' also
respectively. However in a number of places 'printf' is called and
the error count adjusted by hand, so update these places to make use
of FAIL instead. And last but not least adjust the final summary just
to report completion, with any error count following as reported by
the test driver.
- test-tgmath2: no update to FAIL calls required, with the name of the
file of the failure site additionally included by the new FAIL test
failure helper. Also there is no need to track the return status by
hand as any call to FAIL will eventually cause the test case to return
an unsuccesful exit status regardless of the return status from the
test function, via a call to 'adjust_exit_status' made by the test
driver.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit 1b97a9f23b)
Secondary namespaces have a different malloc. Allocating the
buffer in one namespace and freeing it another results in
heap corruption. Fix this by using a static string (potentially
translated) in secondary namespaces. It would also be possible
to use the malloc from the initial namespace to manage the
buffer, but these functions would still not be safe to use in
auditors etc. because a call to strerror could still free a
buffer while it is used by the application. Another approach
could use proper initial-exec TLS, duplicated in secondary
namespaces, but that would need a callback interface for freeing
libc resources in namespaces on thread exit, which does not exist
today.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 25a5eb4010)
Issue was we were expecting not matches with CHAR before the start of
the string in the page cross case.
The check code in the page cross case:
```
and $0xffffffffffffffc0,%rax
vmovdqa64 (%rax),%zmm17
vpcmpneqb %zmm17,%zmm16,%k1
vptestmb %zmm17,%zmm17,%k0{%k1}
kmovq %k0,%rax
inc %rax
shr %cl,%rax
je L(continue)
```
expects that all characters that neither match null nor CHAR will be
1s in `rax` prior to the `inc`. Then the `inc` will overflow all of
the 1s where no relevant match was found.
This is incorrect in the page-cross case, as the
`vmovdqa64 (%rax),%zmm17` loads from before the start of the input
string.
If there are matches with CHAR before the start of the string, `rax`
won't properly overflow.
The fix is quite simple. Just replace:
```
inc %rax
shr %cl,%rax
```
With:
```
sar %cl,%rax
inc %rax
```
The arithmetic shift will clear any matches prior to the start of the
string while maintaining the signbit so the 1s can properly overflow
to zero in the case of no matches.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
(cherry picked from commit 7da0886247)
Use RXX_LP in RTLD_START_ENABLE_X86_FEATURES. Support shadow stack during
startup for Linux 6.10:
commit 2883f01ec37dd8668e7222dfdb5980c86fdfe277
Author: H.J. Lu <hjl.tools@gmail.com>
Date: Fri Mar 15 07:04:33 2024 -0700
x86/shstk: Enable shadow stacks for x32
1. Add shadow stack support to x32 signal.
2. Use the 64-bit map_shadow_stack syscall for x32.
3. Set up shadow stack for x32.
Add the map_shadow_stack system call to <fixup-asm-unistd.h> and regenerate
arch-syscall.h. Tested on Intel Tiger Lake with CET enabled x32. There
are no regressions with CET enabled x86-64. There are no changes in CET
enabled x86-64 _dl_start_user.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
(cherry picked from commit 8344c1f551)
Remove sysdeps/x86_64/x32/dl-machine.h by folding x32 ARCH_LA_PLTENTER,
ARCH_LA_PLTEXIT and RTLD_START into sysdeps/x86_64/dl-machine.h. There
are no regressions on x86-64 nor x32. There are no changes in x86-64
_dl_start_user. On x32, _dl_start_user changes are
<_dl_start_user>:
mov %eax,%r12d
+ mov %esp,%r13d
mov (%rsp),%edx
mov %edx,%esi
- mov %esp,%r13d
and $0xfffffff0,%esp
mov 0x0(%rip),%edi # <_dl_start_user+0x14>
lea 0x8(%r13,%rdx,4),%ecx
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
(cherry picked from commit 652c6cf269)
This avoids crashes if a test is passed unknown options.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit c2a474f461)
This is a follow-up to 10de4a47ef that
reworded the manual entries for putc and putwc and removed any
performance claims.
This commit further clarifies these entries and brings getc and getwc in
line with the descriptions of putc and putwc, removing any performance
claims from them as well.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 942670c81d)
Rename the identifier sz to __sz everywhere.
Fixes: a643f60c53 ("Make sure that the fortified function conditionals are constant")
(cherry picked from commit 39ca997ab3)
Previous GCC versions do not support the C23 change that
allows labels on declarations.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit ec119972cb)
Add tests for MREMAP_MAYMOVE and MREMAP_FIXED. On Linux, also test
MREMAP_DONTUNMAP.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit ff0320bec2)
Update the mremap C implementation to support the optional argument for
MREMAP_DONTUNMAP added in Linux 5.7 since it may not always be correct
to implement a variadic function as a non-variadic function on all Linux
targets. Return MAP_FAILED and set errno to EINVAL for unknown flag bits.
This fixes BZ #31968.
Note: A test must be added when a new flag bit is introduced.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
(cherry picked from commit 6c40cb0e9f)
Add string/test-strncmp-nonarray and
wcsmbs/test-wcsncmp-nonarray.
This is the test that uncovered bug 31934. Test run time
is more than one minute on a fairly current system, so turn
these into xtests that do not run automatically.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
(cherry picked from commit 54252394c2)
This commit adds string/test-strnlen-nonarray and
wcsmbs/test-wcsnlen-nonarray.
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
(cherry picked from commit 783d4c0b81)
The existing description for setrlimit() has some ambiguity. It could be
understood to have the semantics of getrlimit(), i.e., the limits from the
process are stored in the provided rlp pointer.
Make the description more explicit that rlp are the input values, and that
the limits of the process is changed with this function.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit aedbf08891)
The manual entry for `putc' described what "most systems" do instead of
describing the glibc implementation and its guarantees. This commit
fixes that by warning that putc may be implemented as a macro that
double-evaluates `stream', and removing the performance claim.
Even though the current `putc' implementation does not double-evaluate
`stream', offering this obscure guarantee as an extension to what
POSIX allows does not seem very useful.
The entry for `putwc' is also edited to bring it in line with `putc'.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
(cherry picked from commit 10de4a47ef)
Improve aligned_alloc/calloc/malloc test coverage by adding
multi-threaded tests with random memory allocations and with/without
cross-thread memory deallocations.
Perform a number of memory allocation calls with random sizes limited
to 0xffff.
Use the existing DSO ('malloc/tst-aligned_alloc-lib.c') to randomize
allocator selection.
The multi-threaded allocation/deallocation is staged as described below:
- Stage 1: Half of the threads will be allocating memory and the
other half will be waiting for them to finish the allocation.
- Stage 2: Half of the threads will be allocating memory and the
other half will be deallocating memory.
- Stage 3: Half of the threads will be deallocating memory and the
second half waiting on them to finish.
Add 'malloc/tst-aligned-alloc-random-thread.c' where each thread will
deallocate only the memory that was previously allocated by itself.
Add 'malloc/tst-aligned-alloc-random-thread-cross.c' where each thread
will deallocate memory that was previously allocated by another thread.
The intention is to be able to utilize existing malloc testing to ensure
that similar allocation APIs are also exposed to the same rigors.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
(cherry picked from commit b0fbcb7d00)
Make sure the DSO used by aligned_alloc/calloc/malloc tests does not get
a global lock on multithreaded tests.
Reviewed-by: Arjun Shankar <arjun@redhat.com>
(cherry picked from commit 9a27b566b2)
The current toolchain does not consistently generate it, and
glibc does not use it.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
(cherry picked from commit 90842d3980)
In single-request mode, there is no second response after an error
because the second query has not been sent yet. Waiting for it
introduces an unnecessary timeout.
Reviewed-by: DJ Delorie <dj@redhat.com>
(cherry picked from commit af625987d6)
For each input readelf output, localplt.awk parses each 'Relocation
section' entry, checks its offset against the dynamic section entry, and
saves each DT_JMPREL, DT_RELA, and DT_REL offset value it finds. After
all lines are read, the script checks if any segment offset differed
from 0, meaning at least one 'Relocation section' was matched.
However, if the shared object was built with RELR support and the static
linker could place all the relocation on DT_RELR, there would be no
DT_JMPREL, DT_RELA, and DT_REL entries; only a DT_RELR.
For the current three ABIs that support (aarch64, x86, and powerpc64),
the powerpc64 ld.so shows the behavior above. Both x86_64 and aarch64
show extra relocations on '.rela.dyn', which makes the script check to
succeed.
This patch fixes by handling DT_RELR, where the offset is checked
against the dynamic section entries and if the shared object contains an
entry it means that there are no extra PLT entries (since all
relocations are relative).
It fixes the elf/check-localplt failure on powerpc.
Checked with a build/check for aarch64-linux-gnu, x86_64-linux-gnu,
i686-linux-gnu, arm-linux-gnueabihf, s390x-linux-gnu, powerpc-linux-gnu,
powerpc64-linux-gnu, and powerpc64le-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The powerpc pkey_get/pkey_set support was only added for 64-bit [1],
and tst-pkey only checks if the support was present with pkey_alloc
(which does not fail on powerpc32, at least running a 64-bit kernel).
Checked on powerpc-linux-gnu.
[1] https://sourceware.org/git/gitweb.cgi?p=glibc.git;h=a803367bab167f5ec4fde1f0d0ec447707c29520
Reviewed-By: Andreas K. Huettel <dilfridge@gentoo.org>
