If more than 255 bytes should be copied, the algorithm jumps away.
Before this patch, it jumps to the mvc-loop (.L_G5_12).
Now it jumps first to the "> 1MB" check, which jumps away to
__memcpy_mvcle. Otherwise, the mvc-loop (.L_G5_12) copies the bytes.
ChangeLog:
* sysdeps/s390/s390-32/memcpy.S (memcpy):
Jump to 1MB check before executing mvc-loop.
After the heap rewriting added in commit
4cf6c72fd2 (malloc: Rewrite dumped heap
for compatibility in __malloc_set_state), we can change malloc alignment
for new allocations because the alignment of old allocations no longer
matters.
We need to increase the malloc state version number, so that binaries
containing dumped heaps of the new layout will not try to run on
previous versions of glibc, resulting in obscure crashes.
This commit addresses a failure of tst-malloc-thread-fail on the
affected architectures (32-bit ppc and mips) because the test checks
pointer alignment.
The call is technically in a loop, and under certain circumstances
(which are quite difficult to reproduce in a test case), alloca
can be invoked repeatedly during a single call to clntudp_call.
As a result, the available stack space can be exhausted (even
though individual alloca sizes are bounded implicitly by what
can fit into a UDP packet, as a side effect of the earlier
successful send operation).
This avoids aliasing issues with GCC 6 in -fno-strict-aliasing
mode. (With implicit padding, not all data is copied.)
This change makes it explicit that struct sockaddr_storage is
only 126 bytes large on m68k (unlike elsewhere, where we end up
with the requested 128 bytes). The new test case makes sure that
this does not happen on other architectures.
The conform/ test of limits.h namespace for XPG3 was failing because
of NL_* and NZERO defines. Those symbols are EX-shaded, not
UX-shaded, so it's correct for them to be defined for XPG3; this patch
corrects the expectations accordingly. (Actually it looks like they
should not be listed as optional for these standards, but that's
another matter.)
Tested for x86_64 and x86.
* conform/data/limits.h-data (CHARCLASS_NAME_MAX): Also expect for
[XPG3 || XPG4].
(NL_ARGMAX): Also expect for [XPG3].
(NL_LANGMAX): Likewise.
(NL_MSGMAX): Likewise.
(NL_NMAX): Likewise.
(NL_SETMAX): Likewise.
(NL_TEXTMAX): Likewise.
(NZERO): Likewise.
(TMP_MAX): Likewise.
* conform/Makefile (test-xfail-XPG3/limits.h/conform): Remove
variable.
This patch updates sysdeps/unix/sysv/linux/bits/socket.h for new
constants added in Linux 4.6. AF_KCM / PF_KCM are added. SOL_KCM is
new, and I added a lot of SOL_* values postdating the last one present
in the header, since I saw no apparent reason for the set in glibc to
stop at SOL_IRDA. MSG_BATCH is added; Linux also has
MSG_SENDPAGE_NOTLAST which is not in glibc, but given the comment
starts "sendpage() internal" I presume it's correct for it not to be
in glibc.
(Note that this is a case where the Linux kernel header with userspace
relevant values is *not* a uapi header but include/linux/socket.h - I
don't know why, but at least this header, as well as uapi headers,
needs reviewing for glibc-relevant changes each release.)
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* sysdeps/unix/sysv/linux/bits/socket.h (PF_KCM): New macro.
(PF_MAX): Update value.
(AF_KCM): New macro.
(SOL_NETBEUI): Likewise.
(SOL_LLC): Likewise.
(SOL_DCCP): Likewise.
(SOL_NETLINK): Likewise.
(SOL_TIPC): Likewise.
(SOL_RXRPC): Likewise.
(SOL_PPPOL2TP): Likewise.
(SOL_BLUETOOTH): Likewise.
(SOL_PNPIPE): Likewise.
(SOL_RDS): Likewise.
(SOL_IUCV): Likewise.
(SOL_CAIF): Likewise.
(SOL_ALG): Likewise.
(SOL_NFC): Likewise.
(SOL_KCM): Likewise.
(MSG_BATCH): New enum value and macro.
L2 cache is shared by 2 cores on Knights Landing, which has 4 threads
per core:
https://en.wikipedia.org/wiki/Xeon_Phi#Knights_Landing
So L2 cache is shared by 8 threads on Knights Landing as reported by
CPUID. We should remove special L2 cache case for Knights Landing.
[BZ #18185]
* sysdeps/x86/cacheinfo.c (init_cacheinfo): Don't limit threads
sharing L2 cache to 2 for Knights Landing.
This patch corrects various conformtest expectations in ftw.h for XPG3
and XPG4.
Tested for x86_64 and x86.
* conform/data/ftw.h-data (struct FTW): Do not expect for [XPG3].
(FTW_DP): Do not expect for [XPG3 || XPG4].
(FTW_SL): Do not expect for [XPG3].
(FTW_SLN): Likewise.
(FTW_PHYS): Likewise.
(FTW_MOUNT): Likewise.
(FTW_DEPTH): Likewise.
(FTW_CHDIR): Likewise.
(nftw): Likewise.
* conform/Makefile (test-xfail-XPG3/ftw.h/conform): Remove
variable.
ldbl-128ibm had an implementation of fmal that just did (x * y) + z in
most cases, with no attempt at actually being a fused operation.
This patch replaces it with a genuine fused operation. It is not
necessarily correctly rounding, but should produce a result at least
as accurate as the long double arithmetic operations in libgcc, which
I think is all that can reasonably be expected for such a non-IEEE
format where arithmetic is approximate rather than rounded according
to any particular rule for determining the exact result. Like the
libgcc arithmetic, it may produce spurious overflow and underflow
results, and it falls back to the libgcc multiplication in the case of
(finite, finite, zero).
This concludes the fixes for bug 13304; any subsequently found fma
issues should go in separate Bugzilla bugs. Various other pieces of
bug 13304 were fixed in past releases over the past several years.
Tested for powerpc.
[BZ #13304]
* sysdeps/ieee754/ldbl-128ibm/s_fmal.c: Include <fenv.h>,
<float.h>, <math_private.h> and <stdlib.h>.
(add_split): New function.
(mul_split): Likewise.
(ext_val): New typedef.
(store_ext_val): New function.
(mul_ext_val): New function.
(compare): New function.
(add_split_ext): New function.
(__fmal): After checking for Inf, NaN and zero, compute result as
an exact sum of scaled double values in round-to-nearest before
adding those up and adjusting for other rounding modes.
* math/auto-libm-test-in: Remove xfail-rounding:ldbl-128ibm from
tests of fma.
* math/auto-libm-test-out: Regenerated.
Intel CPUID with EAX == 11 returns:
ECX Bits 07 - 00: Level number. Same value in ECX input.
Bits 15 - 08: Level type.
^^^^^^^^^^^^^^^^^^^^^^^^ This is level type.
Bits 31 - 16: Reserved.
Intel processor level type mask should be 0xff00, not 0xff0.
[BZ #20119]
* sysdeps/x86/cacheinfo.c (init_cacheinfo): Correct Intel
processor level type mask for CPUID with EAX == 11.
Skip counting logical threads for Intel processors if the HTT bit is 0
which indicates there is only a single logical processor.
* sysdeps/x86/cacheinfo.c (init_cacheinfo): Skip counting
logical threads if the HTT bit is 0.
* sysdeps/x86/cpu-features.h (bit_cpu_HTT): New.
(index_cpu_HTT): Likewise.
(reg_HTT): Likewise.
X86-64 memset-vec-unaligned-erms.S aligns many jump targets, which
increases code sizes, but not necessarily improve performance. As
memset benchtest data of align vs no align on various Intel and AMD
processors
https://sourceware.org/bugzilla/attachment.cgi?id=9277
shows that aligning jump targets isn't necessary.
[BZ #20115]
* sysdeps/x86_64/multiarch/memset-vec-unaligned-erms.S (__memset):
Remove alignments on jump targets.
This patch corrects some conformtest expectations for pwd.h for XPG4.
Tested for x86_64 and x86.
* conform/data/pwd.h-data (endpwent): Do not expect for [XPG3].
(getpwent): Likewise.
(setpwent): Likewise.
* conform/Makefile (test-xfail-XPG3/pwd.h/conform): Remove
variable.
This patch corrects some conformtest expectations for search.h for
XPG3.
Tested for x86_64 and x86.
* conform/data/search.h-data (insque): Do not expect for [XPG3].
(remque): Likewise.
* conform/Makefile (test-xfail-XPG3/search.h/conform): Remove
variable.
libm-test.inc has a comment about signs of NaNs not being tested.
This is out of date since:
commit ce66581742
Author: Joseph Myers <joseph@codesourcery.com>
Date: Sat Nov 16 12:48:35 2013 +0000
Test signs of NaNs in libm-test.inc where appropriate.
This patch removes the inaccurate statement.
* math/libm-test.inc: Update comment not to refer to signs of NaNs
not being tested.
There is no need to call the internal funtion, _Unwind_Resume, which
is defined in unwind-forcedunwind.c, via PLT.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_timedwait.S
(__condvar_cleanup2): Remove JUMPTARGET from _Unwind_Resume
call.
* sysdeps/unix/sysv/linux/x86_64/pthread_cond_wait.S
(__condvar_cleanup1): Likewise.
Add PTHREAD_UNWIND to replace JUMPTARGET(__pthread_unwind) and define
it to __GI___pthread_unwind within libpthread.
* sysdeps/unix/sysv/linux/x86_64/cancellation.S (PTHREAD_UNWIND):
New
(__pthread_unwind): Renamed to ...
(PTHREAD_UNWIND): This.
(__pthread_enable_asynccancel): Replace
JUMPTARGET(__pthread_unwind) with PTHREAD_UNWIND.
This patch adds CLONE_NEWCGROUP, new in Linux 4.6, to
sysdeps/unix/sysv/linux/bits/sched.h.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
* sysdeps/unix/sysv/linux/bits/sched.h [__USE_GNU]
(CLONE_NEWCGROUP): New macro.
This patch adds Q_GETNEXTQUOTA, new in Linux 4.6, to
sysdeps/unix/sysv/linux/sys/quota.h.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
* sysdeps/unix/sysv/linux/sys/quota.h [_LINUX_QUOTA_VERSION >= 2]
(Q_GETNEXTQUOTA): New macro.
Clear the destination buffer updated by the previous run in bench-memcpy.c
and test-memcpy.c to catch the error when the following implementations do
not copy anything.
[BZ #19907]
* benchtests/bench-memcpy.c (do_one_test): Clear the destination
buffer updated by the previous run.
* string/test-memcpy.c (do_one_test): Likewise.
* benchtests/bench-memmove.c (do_one_test): Add a comment.
* string/test-memmove.c (do_one_test): Likewise.
stdlib.h declares grantpt, ptsname, unlockpt for __USE_XOPEN. This
patch corrects the condition to __USE_XOPEN_EXTENDED (these functions
are new in XPG4).
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #20094]
* stdlib/stdlib.h (grantpt): Declare if [__USE_XOPEN_EXTENDED],
not [__USE_XOPEN].
(unlockpt): Likewise.
(ptsname): Likewise.
* conform/Makefile (test-xfail-XPG3/stdlib.h/conform): Remove
variable.
sys/stat.h should define S_IFSOCK and S_ISSOCK for XPG4 (XNS), but
does not. This patch corrects the relevant header conditionals.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #20076]
* io/sys/stat.h (S_IFSOCK): Define for [__USE_XOPEN_EXTENDED]
instead of [__USE_UNIX98].
(S_ISSOCK): Likewise.
* conform/Makefile (test-xfail-XPG4/sys/stat.h/conform): Remove
variable.
stdlib.h declares rand_r if __USE_POSIX; i.e., POSIX.1:1990. But
rand_r was added along with threads, so the condition should be
__USE_POSIX199506. This patch corrects the condition.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #20074]
* stdlib/stdlib.h (rand_r): Declare if [__USE_POSIX199506], not if
[__USE_POSIX].
* conform/Makefile (test-xfail-XPG4/stdlib.h/conform): Remove
variable.
UNIX98 and XPG4 have ttyslot in <stdlib.h>. glibc, however, has it in
<unistd.h>, for __USE_MISC || (__USE_XOPEN_EXTENDED && !__USE_UNIX98),
but no supported standard has it in <unistd.h>.
This patch adds a properly conditioned declaration to <stdlib.h> (only
enabled for the relevant standards, not for __USE_MISC or __USE_GNU).
The <unistd.h> declaration is restricted to __USE_MISC. Some relevant
XFAILs are removed.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #20051]
* posix/unistd.h [__USE_XOPEN_EXTENDED && !__USE_UNIX98]
(ttyslot): Do not declare.
* stdlib/stdlib.h [__USE_XOPEN_EXTENDED && !__USE_XOPEN2K]
(ttyslot): New prototype.
* conform/Makefile (test-xfail-XPG4/unistd.h/conform): Remove
variable.
(test-xfail-UNIX98/stdlib.h/conform): Likewise.
The testcase tst-cancel[x]17 ends sometimes with a segmentation fault.
This happens in one of 10000 cases. Then the real testcase has already
exited with success and returned from do_test(). The segmentation fault
occurs after returning from main in _dl_fini().
In those cases, the aio_read(&a) was not canceled because the read
request was already in progress. In the meanwhile aio_write(ap) wrote
something to the pipe and the read request is able to read the
requested byte.
The read request hasn't finished before returning from do_test().
After it finishes, it writes the return value and error code from the
read syscall to the struct aiocb a, which lies on the stack of do_test.
The stack of the subsequent function call of _dl_fini or _dl_sort_fini,
which is inlined in _dl_fini is corrupted.
In case of S390, it reads a zero and decrements it by 1:
unsigned int k = nmaps - 1;
struct link_map **runp = maps[k]->l_initfini;
The load from unmapped memory leads to the segmentation fault.
The stack corruption also happens on other architectures.
I saw them e.g. on x86 and ppc, too.
This patch adds an aio_suspend call to ensure, that the read request
is finished before returning from do_test().
ChangeLog:
* nptl/tst-cancel17.c (do_test): Wait for finishing aio_read(&a).
The first SIGUSR1 signal could arrive when sigusr1_sender_pid
was still 0. As a result, kill would send SIGSTOP to the
entire process group. This would cause the test to hang before
printing any output.
This commit also adds a sched_yield to the signal source, so that
it does not flood the parent process with signals it has never a
chance to handle.
Even with these changes, tst-mallocfork2 still fails reliably
after the fix in commit commit 56290d6e76
(Increase fork signal safety for single-threaded processes) is
backed out.
This patch corrects some spurious conformtest stdlib.h expectations
for XPG3 (not based on a full review of the expectations for that
standard, so other issues may remain).
Tested for x86_64 and x86.
* conform/data/stdlib.h-data (a64l): Do not expect for [XPG3].
(ecvt): Likewise.
(fcvt): Likewise.
(gcvt): Likewise.
(getsubopt): Likewise.
(grantpt): Likewise.
(initstate): Likewise.
(l64a): Likewise.
(mktemp): Likewise.
(mkstemp): Likewise.
(ptsname): Likewise.
(random): Likewise.
(realpath): Likewise.
(setstate): Likewise.
(srandom): Likewise.
(ttyslot): Likewise.
(unlockpt): Likewise.
(valloc): Likewise.
This patch corrects a spurious conformtest expectation of strdup in
string.h for XPG3.
Tested for x86_64 and x86.
* conform/data/string.h-data (strdup): Do not expect for [XPG3].
* conform/Makefile (test-xfail-XPG3/string.h/conform): Remove
variable.
In static executable, since init_cpu_features is called early from
__libc_start_main, there is no need to call it again in dl_platform_init.
[BZ #20072]
* sysdeps/i386/dl-machine.h (dl_platform_init): Call
init_cpu_features only if SHARED is defined.
* sysdeps/x86_64/dl-machine.h (dl_platform_init): Likewise.
This will allow us to change many aspects of the malloc implementation
while preserving compatibility with existing Emacs binaries.
As a result, existing Emacs binaries will have a larger RSS, and Emacs
needs a few more milliseconds to start. This overhead is specific
to Emacs (and will go away once Emacs switches to its internal malloc).
The new checks to make free and realloc compatible with the dumped heap
are confined to the mmap paths, which are already quite slow due to the
munmap overhead.
This commit weakens some security checks, but only for heap pointers
in the dumped main arena. By default, this area is empty, so those
checks are as effective as before.
This patch corrects spurious conformtest expectations of getdate and
getdate_err for XPG3. (This is not based on a full review of the
expectations, so there may be other issues where the header and tests
agree but are both incorrect.)
Tested for x86_64 and x86.
* conform/data/time.h-data (getdate_err): Do not expect for
[XPG3].
(getdate): Likewise.
* conform/Makefile (test-xfail-XPG3/time.h/conform): Remove
variable.
The conformtest tests of unistd.h fail for XPG3 because of various
expectations that are incorrect for XPG3. This patch corrects those
bogus expectations, and one bogus expectation for XPG4. (This is not
based on a full review of the standards so there may well still be
other bugs in the expectations for this header.)
Tested for x86_64 and x86.
* conform/data/unistd.h-data (F_LOCK): Do not expect for [XPG3].
(F_ULOCK): Likewise.
(F_TEST): Likewise.
(F_TLOCK): Likewise.
(useconds_t): Likewise.
(intptr_t): Do not expect for [XPG3] or [XPG4].
(brk): Do not expect for [XPG3]
(fchown): Likewise.
(fchdir): Likewise.
(ftruncate): Likewise.
(getdtablesize): Likewise.
(gethostid): Likewise.
(getpagesize): Likewise.
(getpgid): Likewise.
(getsid): Likewise.
(getwd): Likewise.
(lchown): Likewise.
(lockf): Likewise.
(readlink): Likewise.
(sbrk): Likewise.
(setpgrp): Likewise.
(setregid): Likewise.
(setreuid): Likewise.
(symlink): Likewise.
(sync): Likewise.
(truncate): Likewise.
(ualarm): Likewise.
(usleep): Likewise.
(vfork): Likewise.
* conform/Makefile (test-xfail-XPG3/unistd.h/conform): Remove
variable.
unistd.h declares gethostname for __USE_UNIX98 || __USE_XOPEN2K. But
it's also in XPG4 (XNS volume - C438 - not the main definitions of
system interfaces and headers in C435). This patch corrects the
condition.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #20054]
* posix/unistd.h (gethostname): Declare if [__USE_XOPEN_EXTENDED],
not [__USE_UNIX98].
* conform/data/unistd.h-data (gethostname): Do not expect for
[XPG3].
The conform/ tests for fcntl.h are failing for XPG3 and XPG4 because
of missing S_IFSOCK.
This is a case of a bogus test. The relevant wording requiring such
constants is, in current POSIX (and this requirement dates back as far
as XPG4), "The <fcntl.h> header shall define the symbolic constants
for file modes for use as values of mode_t as described in
<sys/stat.h>.". Note that this is *file modes* not *file types*.
That makes sense, since the point is presumably for use with functions
such as open that are declared in fcntl.h, where file modes are
relevant but file types aren't. So this patch removes all those
spurious S_IF* expectations for fcntl.h (the macros are generally
still *allowed* through the permission to make everything from
sys/stat.h visible).
Tested for x86_64 and x86.
* conform/data/fcntl.h-data [!POSIX] (S_IFMT): Do not expect.
[!POSIX] (S_IFBLK): Likewise.
[!POSIX] (S_IFCHR): Likewise.
[!POSIX] (S_IFIFO): Likewise.
[!POSIX] (S_IFREG): Likewise.
[!POSIX] (S_IFDIR): Likewise.
[!POSIX] (S_IFLNK): Likewise.
[!POSIX] (S_IFSOCK): Likewise.
* conform/Makefile (test-xfail-XPG3/fcntl.h/conform): Remove
variable.
(test-xfail-XPG4/fcntl.h/conform): Likewise.
small sets of up to 16 bytes, medium of 16..96 bytes which are fully unrolled.
Large memsets of more than 96 bytes align the destination and use an unrolled
loop processing 64 bytes per iteration. Memsets of zero of more than 256 use
the dc zva instruction, and there are faster versions for the common ZVA sizes
64 or 128. STP of Q registers is used to reduce codesize without loss of
performance.
The speedup on test-memset is 1% on Cortex-A57 and 8% on Cortex-A53.
* sysdeps/aarch64/memset.S (__memset):
Rewrite of optimized memset.
This provides a band-aid and addresses the scenario where fork is
called from a signal handler while the process is in the malloc
subsystem (or has acquired the libio list lock). It does not
address the general issue of async-signal-safety of fork;
multi-threaded processes are not covered, and some glibc
subsystems have fork handlers which are not async-signal-safe.
termios.h should declare tcgetsid for XPG4, but only does so for
__USE_UNIX98 || __USE_XOPEN2K8 at present. This patch fixes the
declaration conditions. A spurious conformtest expectation of this
declaration for XPG3 is removed, and two XFAILs that are fixed by
these changes are also removed.
Tested for x86_64 and x86 (testsuite, and that installed stripped
shared libraries are unchanged by the patch).
[BZ #20055]
* termios/termios.h (pid_t): Define for [__USE_XOPEN_EXTENDED]
instead of [__USE_UNIX98].
(tcgetsid): Declare for [__USE_XOPEN_EXTENDED] instead of
[__USE_UNIX98].
* conform/data/termios.h-data (tcgetsid): Do not expect for
[XPG3].
* conform/Makefile (test-xfail-XPG3/termios.h/conform): Remove
variable.
(test-xfail-XPG4/termios.h/conform): Likewise.
if glibc is build with -march=z900 | -march=z990,
the startup file gcrt1.o (used if you link with gcc -pg)
contains R_390_GOT12 | R_390_GOT20 relocations.
Thus, an entry in the GOT can be addressed relative to the GOT pointer
with a 12 | 20 bit displacement value.
The startup files should not contain R_390_GOT12,
R_390_GOT20 relocations, but R_390_GOTENT ones.
This patch removes the overrides of pic-ccflag and
the default pic-ccflag = -fPIC in Makeconfig
is used instead to get the R_390_GOTENT relocations in gcrt1.o.
ChangeLog:
* sysdeps/s390/s390-32/Makefile (pic-ccflag): Remove.
* sysdeps/s390/s390-64/Makefile: Likewise.
Merge x86 ifunc-defines.sym with x86 cpu-features-offsets.sym. Remove
x86 ifunc-defines.sym and rtld-global-offsets.sym. No code changes on
i686 and x86-64.
* sysdeps/i386/i686/multiarch/Makefile (gen-as-const-headers):
Remove ifunc-defines.sym.
* sysdeps/x86_64/multiarch/Makefile (gen-as-const-headers):
Likewise.
* sysdeps/i386/i686/multiarch/ifunc-defines.sym: Removed.
* sysdeps/x86/rtld-global-offsets.sym: Likewise.
* sysdeps/x86_64/multiarch/ifunc-defines.sym: Likewise.
* sysdeps/x86/Makefile (gen-as-const-headers): Remove
rtld-global-offsets.sym.
* sysdeps/x86_64/multiarch/ifunc-defines.sym: Merged with ...
* sysdeps/x86/cpu-features-offsets.sym: This.
* sysdeps/x86/cpu-features.h: Include <cpu-features-offsets.h>
instead of <ifunc-defines.h> and <rtld-global-offsets.h>.
sys/stat.h declares fchmod if __USE_POSIX (i.e. POSIX.1:1990). But it
was actually added in 1993 and also in XPG4. This patch changes the
conditions to the correct __USE_POSIX199309 || __USE_XOPEN_EXTENDED.
Tested for x86_64 and x86 (testsuite, and that installed shared
libraries are unchanged by the patch).
[BZ #20073]
* io/sys/stat.h (fchmod): Declare for
[__USE_POSIX199309 || __USE_XOPEN_EXTENDED], not [__USE_POSIX].
* conform/Makefile (test-xfail-XPG3/sys/stat.h/conform): Remove
variable.
This patch fixes various conformtest sys/stat.h expectations that were
incorrect for XPG3 (not based on a full review, so not necessarily an
exhaustive set of such corrections). Most of these corrections fix
spurious failures shown in testing (but that for fchmod introduces a
correct failure, as that function is wrongly declared for XPG3, so
this doesn't eliminate any XFAILs).
Tested for x86_64 and x86.
* conform/data/sys/stat.h-data [XPG3] (S_IFLNK): Do not expect.
[XPG3] (S_IFSOCK): Likewise.
[XPG3] (S_ISVTX): Likewise.
[XPG3] (S_ISLNK): Likewise.
[XPG3] (S_ISSOCK): Likewise.
[XPG3] (fchmod): Likewise.
[XPG3] (lstat): Likewise.
[XPG3] (mknod): Likewise.
The conformtest expectations expect the struct stat fields st_blksize
and st_blocks to be of types blksize_t and blkcnt_t. But XPG4 does
not have those types, using long instead, and XPG3 does not have these
fields at all. This patch adjusts the expectations for those
standards, XFAILing them for XPG4 to allow for systems where the
typedefs don't correspond to long.
Tested for x86_64 and x86.
* conform/data/sys/stat.h-data (st_blksize): Do not expect for
[XPG3]. Expect type long and XFAIL for [XPG4].
(st_blocks): Likewise.
