Both the generic and POWER6 versions provide definitions of the
symbol, which are already provided by the ifunc resolver.
Checked on powerpc-linux-gnu-power4.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
For powerpc64 the generic version provides a weak definition of
strchrnul, which are already provided by the ifunc resolver. The
powerpc32 version is slight different, where for static case there
is no iFUNC support.
The strncasecmp_l is provided ifunc resolver.
Checked on powerpc-linux-gnu-power4 and powerpc64-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
The generic version provides weak definitions of memchr/strlen,
which are already provided by the ifunc resolvers.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Linux 6.9 adds some more PIDFD_* constants. Add them to glibc's
sys/pidfd.h, including updating comments that said FLAGS was reserved
and must be 0, along with updating tst-pidfd-consts.py.
Tested with build-many-glibcs.py.
libc.so doesn't use nor export write_profiling functions. There is no
point to define them in libc.so nor in libc.a. Fix BZ #31756 by defining
them only in profile library.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Don't provide __nexttowardf128_do_not_use, nexttowardf128_do_not_use,
finitef128_do_not_use, isinff128_do_not_use and isnanf128_do_not_use.
This fixes BZ #31757.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
scalb is a deprecated interface which was obsolescent in POSIX.1-2001,
removed in POSIX.1-2008, never made to C standard. significant was
originally from BSD and never made in any standard. Fix BZ #31760 by
not providing _FloatN aliases for them.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Some static implementation of float128 routines might call __isnanf128,
which is not provided by the static object.
Checked on x86_64-linux-gnu.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
It basically copy the already in place rules for dynamic tests for
auto-generated math functions for all support types. To avoid the
need to duplicate .inc files, a .SECONDEXPANSION rules is adeed for
the gen-libm-test.py generation.
New tests are added on the new rules 'libm-test-funcs-auto-static',
'libm-test-funcs-noauto-static', and 'libm-test-funcs-narrow-static';
similar to the non-static counterparts.
To avoid add extra build and disk requirement, the new math static
tests are only enable with a new define 'build-math-static-tests'.
Reviewed-by: H.J. Lu <hjl.tools@gmail.com>
Since Glibc never provides symbol binary compatibility for relocatable
files, fix BZ #31766 by changing _IO_stderr_/_IO_stdin_/_IO_stdout to
compat symbols.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
There is no _dl_mcount_wrapper prototype in any installed header files.
Fix BZ #31765 by changing _dl_mcount_wrapper to a compat symbol and
obsolete it in glibc 2.40.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
The commit 08ddd26814 removed the static exp10 on i386 and m68k with an
empty w_exp10.c (required for the ABIs that uses the newly
implementation). This patch fixes by adding the required symbols on the
arch-specific w_exp{f}_compat.c implementation.
Checked on i686-linux-gnu and with a build for m68k-linux-gnu.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
The commit 16439f419b removed the static fmod/fmodf on i386 and m68k
with and empty w_fmod.c (required for the ABIs that uses the newly
implementation). This patch fixes by adding the required symbols on
the arch-specific w_fmod{f}_compat.c implementation.
To statically build fmod fails on some ABI (alpha, s390, sparc) because
it does not export the ldexpf128, this is also fixed by this patch.
Checked on i686-linux-gnu and with a build for m68k-linux-gnu.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
clone3 isn't exported from glibc and is hidden in libc.so. Fix BZ #31770
by removing clone3 alias.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Plus a small amount of moving includes around in order to be able to
remove duplicate definition of asuint64.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Rounding intrinsics may not be inlined without
-fno-math-errno. libmvec is free to do what it
likes with errno, so disable it for better
performance.
Tested with no regression on aarch64 and x86_64.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
_res_opcodes was exported by accident as a variable. Fix BZ #31764 by
making _res_opcodes a compat symbol.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
Fix BZ #31768 by not defining stpncpy alias when used in IFUNC.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Sunil K Pandey <skpgkp2@gmail.com>
Add start and end indicators that identify the test being run in the
verbose output. Better identify the tests for max errors in the
summary output. Count each exception checked for each test. Remove
double counting of tests for the check_<type> functions other than
check_float_internal. Rename print_max_error and
print_complex_max_error to check_max_error and check_complex_max_error
respectively since they have side effects.
Co-Authored-By: Carlos O'Donell <carlos@redhat.com>
Reviewed-By: Joseph Myers <josmyers@redhat.com>
C23 adds various <math.h> function families originally defined in TS
18661-4. Add the log2p1 functions (log2(1+x): like log1p, but for
base-2 logarithms).
This illustrates the intended structure of implementations of all
these function families: define them initially with a type-generic
template implementation. If someone wishes to add type-specific
implementations, it is likely such implementations can be both faster
and more accurate than the type-generic one and can then override it
for types for which they are implemented (adding benchmarks would be
desirable in such cases to demonstrate that a new implementation is
indeed faster).
The test inputs are copied from those for log1p. Note that these
changes make gen-auto-libm-tests depend on MPFR 4.2 (or later).
The bulk of the changes are fairly generic for any such new function.
(sysdeps/powerpc/nofpu/Makefile only needs changing for those
type-generic templates that use fabs.)
Tested for x86_64 and x86, and with build-many-glibcs.py.
Linux 6.9 has no new syscalls. Update the version number in
syscall-names.list to reflect that it is still current for 6.9.
Tested with build-many-glibcs.py.
Fix BZ #31755 by renaming the internal function procutils_read_file to
__libc_procutils_read_file.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Fix BZ #31759 by not defining nearbyint aliases when used in IFUNC.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Since -r in GCC 6/7/8 doesn't imply -nostdlib -nostartfiles, update the
link-static-libc.out rule to also pass -nostdlib -nostartfiles. This
fixes BZ #31753.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
This supports common coding patterns. The GCC C front end before
version 7 rejects the may_alias attribute on a struct definition
if it was not present in a previous forward declaration, so this
attribute can only be conditionally applied.
This implements the spirit of the change in Austin Group issue 1641.
Suggested-by: Marek Polacek <polacek@redhat.com>
Suggested-by: Jakub Jelinek <jakub@redhat.com>
Reviewed-by: Sam James <sam@gentoo.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch fixes BZ #27777 "fclose does a linear search, takes ages when
many FILE* are opened". Simply put, the master list of opened (FILE*),
namely _IO_list_all, is a singly-linked list. As a consequence, the
removal of a single element is in O(N), which cripples the performance
of fclose(). The patch switches to a doubly-linked list, yielding O(1)
removal. The one padding field in struct _IO_FILE, __pad5, is renamed
to _prevchain for a doubly-linked list. Since fields in struct _IO_FILE
after the _lock field are internal to glibc and opaque to applications.
We can change them as long as the size of struct _IO_FILE is unchanged,
which is checked as the part of glibc ABI with sizes of _IO_2_1_stdin_,
_IO_2_1_stdout_ and _IO_2_1_stderr_.
NB: When _IO_vtable_offset (fp) == 0, copy relocation will cover the
whole struct _IO_FILE. Otherwise, only fields up to the _lock field
will be copied to applications at run-time. It is used to check if
the _prevchain field can be safely accessed.
After opening 2 million (FILE*), the fclose() of 100 of them takes quite
a few seconds without the patch, and under 2 seconds with it on a loaded
machine.
No test is added since there are no functional changes.
Co-Authored-By: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com>
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch ensures that $libc_cv_cc_submachine, which is set from
"--with-cpu", overrides $CFLAGS for configure time tests.
Suggested-by: Peter Bergner <bergner@linux.ibm.com>
Reviewed-by: Peter Bergner <bergner@linux.ibm.com>
Measure duration of 100 fclose calls after opening 1 million FILEs.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
= `Default_Ignorable_Code_Point`s should have width 0 =
Unicode specifies (https://www.unicode.org/faq/unsup_char.html#3) that characters
with the `Default_Ignorable_Code_Point` property
> should be rendered as completely invisible (and non advancing, i.e. “zero width”),
if not explicitly supported in rendering.
Hence, `wcwidth()` should give them all a width of 0, with two exceptions:
- the soft hyphen (U+00AD SOFT HYPHEN) is assigned width 1 by longstanding precedent
- U+115F HANGUL CHOSEONG FILLER needs a carveout
due to the unique behavior of the conjoining Korean jamo characters.
One composed Hangul "syllable block" like 퓛
is made up of two to three individual component characters, or "jamo".
These are all assigned an `East_Asian_Width` of `Wide`
by Unicode, which would normally mean they would all be assigned
width 2 by glibc; a combination of (leading choseong jamo) +
(medial jungseong jamo) + (trailing jongseong jamo) would then have width 2 + 2 + 2 = 6.
However, glibc (and other wcwidth implementations) special-cases jungseong and jongseong,
assigning them all width 0,
to ensure that the complete block has width 2 + 0 + 0 = 2 as it should.
U+115F is meant for use in syllable blocks
that are intentionally missing a leading jamo;
it must be assigned a width of 2 even though it has no visible display
to ensure that the complete block has width 2.
However, `wcwidth()` currently (before this patch)
incorrectly assigns non-zero width to
U+3164 HANGUL FILLER and U+FFA0 HALFWIDTH HANGUL FILLER;
this commit fixes that.
Unicode spec references:
- Hangul: §3.12 https://www.unicode.org/versions/Unicode15.0.0/ch03.pdf#G24646 and
§18.6 https://www.unicode.org/versions/Unicode15.0.0/ch18.pdf#G31028
- `Default_Ignorable_Code_Point`: §5.21 https://www.unicode.org/versions/Unicode15.0.0/ch05.pdf#G40095.
= Non-`Default_Ignorable_Code_Point` format controls should be visible =
The Unicode Standard, §5.21 - Characters Ignored for Display
(https://www.unicode.org/versions/Unicode15.0.0/ch05.pdf#G40095)
says the following:
> A small number of format characters (General_Category = Cf )
> are also not given the Default_Ignorable_Code_Point property.
> This may surprise implementers, who often assume
> that all format characters are generally ignored in fallback display.
> The exact list of these exceptional format characters
> can be found in the Unicode Character Database.
> There are, however, three important sets of such format characters to note:
>
> - prepended concatenation marks
> - interlinear annotation characters
> - Egyptian hieroglyph format controls
>
> The prepended concatenation marks always have a visible display.
> See “Prepended Concatenation Marks” in [*Section 23.2, Layout Controls*](https://www.unicode.org/versions/Unicode15.1.0/ch23.pdf#M9.35858.HeadingBreak.132.Layout.Controls)
> for more discussion of the use and display of these signs.
>
> The other two notable sets of format characters that exceptionally are not ignored
> in fallback display consist of the interlinear annotation characters,
> U+FFF9 INTERLINEAR ANNOTATION ANCHOR through
> U+FFFB INTERLINEAR ANNOTATION TERMINATOR,
> and the Egyptian hieroglyph format controls,
> U+13430 EGYPTIAN HIEROGLYPH VERTICAL JOINER through
> U+1343F EGYPTIAN HIEROGLYPH END WALLED ENCLOSURE.
> These characters should have a visible glyph display for fallback rendering,
> because if they are not displayed,
> it is too easy to misread the resulting displayed text.
> See “Annotation Characters” in [*Section 23.8, Specials*](https://www.unicode.org/versions/Unicode15.1.0/ch23.pdf#M9.21335.Heading.133.Specials),
> as well as [*Section 11.4, Egyptian Hieroglyphs*](https://www.unicode.org/versions/Unicode15.1.0/ch11.pdf#M9.73291.Heading.1418.Egyptian.Hieroglyphs)
> for more discussion of the use and display of these characters.
glibc currently correctly assigns non-zero width to the prepended concatenation marks,
but it incorrectly gives zero width to the interlinear annotation characters
(which a generic terminal cannot interpret)
and the Egyptian hieroglyph format controls
(which are not widely supported in rendering implementations at present).
This commit fixes both these issues as well.
= Derive Hangul syllable type from Unicode data =
Previosuly, the jungseong and jongseong jamo ranges
were hard-coded into the script. With this commit, they are instead parsed
from the HangulSyllableType.txt data file published by Unicode.
This does not affect the end result.
Signed-off-by: Jules Bertholet <julesbertholet@quoi.xyz>
This is mostly based on AArch64 and RISC-V implementation.
Add R_LARCH_TLS_DESC32 and R_LARCH_TLS_DESC64 relocations.
For _dl_tlsdesc_dynamic function slow path, temporarily save and restore
all vector registers.
Allow the libm-test-driver based tests to have their verbosity set based
on the GLIBC_TEST_LIBM_VERBOSE environment variable. This allows the entire
testsuite to be run with a non-default verbosity.
While here check the conversion for the verbose option as well.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Add a DSO (malloc/tst-aligned_alloc-lib.so) that can be used during
testing to interpose malloc with a call that randomly uses either
aligned_alloc, __libc_malloc, or __libc_calloc in the place of malloc.
Use LD_PRELOAD with the DSO to mirror malloc/tst-malloc.c testing as an
example in malloc/tst-malloc-random.c. Add malloc/tst-aligned-alloc-random.c
as another example that does a number of malloc calls with randomly sized,
but limited to 0xffff, requests.
The intention is to be able to utilize existing malloc testing to ensure
that similar allocation APIs are also exposed to the same rigors.
Reviewed-by: DJ Delorie <dj@redhat.com>
Previously many routines used * to load from vector types stored
in the data table. This is emitted as ldr, which byte-swaps the
entire vector register, and causes bugs for big-endian when not
all lanes contain the same value. When a vector is to be used
this way, it has been replaced with an array and the load with an
explicit ld1 intrinsic, which byte-swaps only within lanes.
As well, many routines previously used non-standard GCC syntax
for vector operations such as indexing into vectors types with []
and assembling vectors using {}. This syntax should not be mixed
with ACLE, as the former does not respect endianness whereas the
latter does. Such examples have been replaced with, for instance,
vcombine_* and vgetq_lane* intrinsics. Helpers which only use the
GCC syntax, such as the v_call helpers, do not need changing as
they do not use intrinsics.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
This test case calls `fopen':
FILE *fp = fopen (temp_file, "r");
however if that fails it reports `fdopen' being the origin of the error.
Adjust the message to say `fopen' then.
On Fedora 40/x86-64, linker enables --enable-new-dtags by default which
generates DT_RUNPATH instead of DT_RPATH. Unlike DT_RPATH, DT_RUNPATH
only applies to DT_NEEDED entries in the executable and doesn't applies
to DT_NEEDED entries in shared libraries which are loaded via DT_NEEDED
entries in the executable. Some glibc tests have libstdc++.so.6 in
DT_NEEDED, which has libm.so.6 in DT_NEEDED. When DT_RUNPATH is generated,
/lib64/libm.so.6 is loaded for such tests. If the newly built glibc is
older than glibc 2.36, these tests fail with
assert/tst-assert-c++: /export/build/gnu/tools-build/glibc-gitlab-release/build-x86_64-linux/libc.so.6: version `GLIBC_2.36' not found (required by /lib64/libm.so.6)
assert/tst-assert-c++: /export/build/gnu/tools-build/glibc-gitlab-release/build-x86_64-linux/libc.so.6: version `GLIBC_ABI_DT_RELR' not found (required by /lib64/libm.so.6)
Pass -Wl,--disable-new-dtags to linker when building glibc tests with
--enable-hardcoded-path-in-tests. This fixes BZ #31719.
Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
