Reflow Makefile.
Sort using updated scripts/sort-makefile-lines.py.
Code generation is changed as routines are linked in sorted order
as expected.
No regressions on x86_64 and i686.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reflow Makefile.
Sort using scripts/sort-makefile-lines.py.
Code generation is changed as routines are linked in sorted order
as expected.
No regressions on x86_64 and i686.
This patch redirects the error functions to the appropriate
longdouble variants which enables the compiler to optimize
for the abi ieeelongdouble.
Signed-off-by: Sachin Monga <smonga@linux.ibm.com>
GCC docs explicitly list perror () as a good candidate for using
__attribute__ ((cold)). So apply __COLD to perror () and similar
functions.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230429131223.2507236-3-bugaevc@gmail.com>
This expands to __attribute__ ((cold)) when supported. It should be
used to mark up functions that are invoked rarely.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
This is nicer, and is going to be required for the following changes
to reasonably stay within the 79 column limit.
No functional change.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Message-Id: <20230419160207.65988-2-bugaevc@gmail.com>
They are both used by __libc_freeres to free all library malloc
allocated resources to help tooling like mtrace or valgrind with
memory leak tracking.
The current scheme uses assembly markers and linker script entries
to consolidate the free routine function pointers in the RELRO segment
and to be freed buffers in BSS.
This patch changes it to use specific free functions for
libc_freeres_ptrs buffers and call the function pointer array directly
with call_function_static_weak.
It allows the removal of both the internal macros and the linker
script sections.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Define the __glibc_fortify and other macros only when __FORTIFY_LEVEL >
0. This has the effect of not defining these macros on older C90
compilers that do not have support for variable length argument lists.
Also trim off the trailing backslashes from the definition of
__glibc_fortify and __glibc_fortify_n macros.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Similar to d0fa09a770, but for syslog.h when _FORTIFY_SOURCE > 0.
Fixes [BZ #27087] by applying long double-related asm redirections
before using functions in bits/syslog.h.
Tested with build-many-glibcs.py.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
clang emits an warning when a double alias redirection is used, to warn
the the original symbol will be used even when weak definition is
overridden. However, this is a common pattern for weak_alias, where
multiple alias are set to same symbol.
Reviewed-by: Fangrui Song <maskray@google.com>
In the future, this will result in a compilation failure if the
macros are unexpectedly undefined (due to header inclusion ordering
or header inclusion missing altogether).
Assembler sources are more difficult to convert. In many cases,
they are hand-optimized for the mangling and no-mangling variants,
which is why they are not converted.
sysdeps/s390/s390-32/__longjmp.c and sysdeps/s390/s390-64/__longjmp.c
are special: These are C sources, but most of the implementation is
in assembler, so the PTR_DEMANGLE macro has to be undefined in some
cases, to match the assembler style.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
This allows us to define a generic no-op version of PTR_MANGLE and
PTR_DEMANGLE. In the future, we can use PTR_MANGLE and PTR_DEMANGLE
unconditionally in C sources, avoiding an unintended loss of hardening
due to missing include files or unlucky header inclusion ordering.
In i386 and x86_64, we can avoid a <tls.h> dependency in the C
code by using the computed constant from <tcb-offsets.h>. <sysdep.h>
no longer includes these definitions, so there is no cyclic dependency
anymore when computing the <tcb-offsets.h> constants.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The a583b6add4 change did not handle large messages that
would require a heap allocation correctly, where the message itself
is not take in consideration.
This patch fixes it and extend the tst-syslog to check for large
messages as well.
Checked on x86_64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
By adding an internal alias to avoid the GOT indirection.
On some architecture, __libc_single_thread may be accessed through
copy relocations and thus it requires to update also the copies
default copy.
This is done by adding a new internal macro,
libc_hidden_data_{proto,def}, which has an addition argument that
specifies the alias name (instead of default __GI_ one).
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Fangrui Song <maskray@google.com>
It was added on Linux 5.10 (ecb8ac8b1f146915aa6b96449b66dd48984caacc)
with the same functionality as madvise but using a pidfd of the target
process.
Checked on x86_64-linux-gnu and i686-linux-gnu.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The check for an ISO C compiler assumes that anything GCC-like will
define __STDC__, even if it's actually a C++ compiler. That's currently
true for G++ and compilers like clang++ that also define __GNUC__, but
it might not always be true.
The C++ standard leaves it implementation-defined whether or not
__STDC__ is defined by C++ compilers. And really the check should be
"ISO C or ISO C++ conforming compiler" anyway. So only give an error if
__GNUC__ is defined and neither __STDC__ nor __cplusplus is defined.
Reviewed-by: Fangrui Song <maskray@google.com>
The fix c8ee1c85 introduced a -1 check for object size without also
checking that object size is a constant. Because of this, the tree
optimizer passes in gcc fail to fold away one of the branches in
__glibc_fortify and trips on a spurious Wstringop-overflow. The warning
itself is incorrect and the branch does go away eventually in DCE in the
rtl passes in gcc, but the constant check is a helpful hint to simplify
code early, so add it in.
Resolves: BZ #29141
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
If `__glibc_objsize (__o) == (size_t) -1` (i.e. `__o` is unknown size), fortify
checks should pass, and `__whatever_alias` should be called.
Previously, `__glibc_objsize (__o) == (size_t) -1` was explicitly checked, but
on commit a643f60c53, this was moved into `__glibc_safe_or_unknown_len`.
A comment says the -1 case should work as: "The -1 check is redundant because
since it implies that __glibc_safe_len_cond is true.". But this fails when:
* `__s > 1`
* `__osz == -1` (i.e. unknown size at compile time)
* `__l` is big enough
* `__l * __s <= __osz` can be folded to a constant
(I only found this to be true for `mbsrtowcs` and other functions in wchar2.h)
In this case `__l * __s <= __osz` is false, and `__whatever_chk_warn` will be
called by `__glibc_fortify` or `__glibc_fortify_n` and crash the program.
This commit adds the explicit `__osz == -1` check again.
moc crashes on startup due to this, see: https://bugs.archlinux.org/task/74041
Minimal test case (test.c):
#include <wchar.h>
int main (void)
{
const char *hw = "HelloWorld";
mbsrtowcs (NULL, &hw, (size_t)-1, NULL);
return 0;
}
Build with:
gcc -O2 -Wp,-D_FORTIFY_SOURCE=2 test.c -o test && ./test
Output:
*** buffer overflow detected ***: terminated
Fixes: BZ #29030
Signed-off-by: Joan Bruguera <joanbrugueram@gmail.com>
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
It also handles the highly unlikely case where localtime might return
NULL, in this case only the PRI is set to hopefully instruct the relay
to get eh TIMESTAMP (as defined by the RFC).
Checked on x86_64-linux-gnu and i686-linux-gnu.
There is no easy solution as described on first comment in bug report,
and some code (like busybox) assumes facilitynames existance when
SYSLOG_NAMES is defined (so we can't just remove it as suggested in
comment #2).
So use the easier solution and guard it with __USE_MISC.
A fixed-sized buffer is used instead of memstream for messages up to
1024 bytes to avoid the potential BUFSIZ (8K) malloc and free for
each syslog call.
Also, since the buffer size is know, memstream is replaced with a
malloced buffer for larger messages.
Checked on x86_64-linux-gnu.
Use a temporary buffer for strftime instead of using internal libio
members, simplify fprintf call on the memstream and memory allocation,
use %b instead of %h, use dprintf instead of writev for LOG_PERROR.
Checked on x86_64-linux-gnu and i686-linux-gnu.
The test cover:
- All possible priorities and facilities through TCP and UDP.
- Same syslog tests for vsyslog.
- Some openlog/syslog/close combinations.
- openlog with LOG_CONS, LOG_PERROR, and LOG_PID.
Internally is done with a test-container where the main process mimics
the syslog server interface.
The test does not cover multithread and async-signal usage.
Checked on x86_64-linux-gnu.
This patch adds some missing access function attributes to getrandom /
getentropy and several functions in sys/xattr.h
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
gcc 12 now has support for the __builtin_dynamic_object_size builtin.
Adapt the macro checks to enable _FORTIFY_SOURCE=3 on gcc 12 and above.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
I used these shell commands:
../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright
(cd ../glibc && git commit -am"[this commit message]")
and then ignored the output, which consisted lines saying "FOO: warning:
copyright statement not found" for each of 7061 files FOO.
I then removed trailing white space from math/tgmath.h,
support/tst-support-open-dev-null-range.c, and
sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following
obscure pre-commit check failure diagnostics from Savannah. I don't
know why I run into these diagnostics whereas others evidently do not.
remote: *** 912-#endif
remote: *** 913:
remote: *** 914-
remote: *** error: lines with trailing whitespace found
...
remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
Starting with commit b05fae4d8e
"elf: Use the minimal malloc on tunables_strdup",
I get lots of segfaults in static tests on s390x when also using, e.g.:
export GLIBC_TUNABLES="glibc.elision.enable=1"
tunables_strdup callls __minimal_malloc which tries to call __mmap
due to insufficient space left. __mmap itself first setups a new
stack frame and segfaults when copying the stack-protector canary
from thread-pointer. The latter one is not yet setup.
Thus this patch also turns off stack-protection for mmap.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The function was renamed to __atomic_wide_counter_load_relaxed
in commit 8bd336a00a ("nptl: Extract
<bits/atomic_wide_counter.h> from pthread_cond_common.c").
And make it an installed header. This addresses a few aliasing
violations (which do not seem to result in miscompilation due to
the use of atomics), and also enables use of wide counters in other
parts of the library.
The debug output in nptl/tst-cond22 has been adjusted to print
the 32-bit values instead because it avoids a big-endian/little-endian
difference.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
GCC 4.9.0 added the alloc_align attribute to say that a function
argument specifies the alignment of the returned pointer. Clang supports
the attribute too. Using the attribute can allow a compiler to generate
better code if it knows the returned pointer has a minimum alignment.
See https://gcc.gnu.org/PR60092 for more details.
GCC implicitly knows the semantics of aligned_alloc and posix_memalign,
but not the obsolete memalign. As a result, GCC generates worse code
when memalign is used, compared to aligned_alloc. Clang knows about
aligned_alloc and memalign, but not posix_memalign.
This change adds a new __attribute_alloc_align__ macro to <sys/cdefs.h>
and then uses it on memalign (where it helps GCC) and aligned_alloc
(where GCC and Clang already know the semantics, but it doesn't hurt)
and xposix_memalign. It can't be used on posix_memalign because that
doesn't return a pointer (the allocated pointer is returned via a void**
parameter instead).
Unlike the alloc_size attribute, alloc_align only allows a single
argument. That means the new __attribute_alloc_align__ macro doesn't
really need to be used with double parentheses to protect a comma
between its arguments. For consistency with __attribute_alloc_size__
this patch defines it the same way, so that double parentheses are
required.
Signed-off-by: Jonathan Wakely <jwakely@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
In _FORTIFY_SOURCE=3, the size expression may be non-constant,
resulting in branches in the inline functions remaining intact and
causing a tiny overhead. Clang (and in future, gcc) make sure that
the -1 case is always safe, i.e. any comparison of the generated
expression with (size_t)-1 is always false so that bit is taken care
of. The rest is avoidable since we want the _chk variant whenever we
have a size expression and it's not -1.
Rework the conditionals in a uniform way to clearly indicate two
conditions at compile time:
- Either the size is unknown (-1) or we know at compile time that the
operation length is less than the object size. We can call the
original function in this case. It could be that either the length,
object size or both are non-constant, but the compiler, through
range analysis, is able to fold the *comparison* to a constant.
- The size and length are known and the compiler can see at compile
time that operation length > object size. This is valid grounds for
a warning at compile time, followed by emitting the _chk variant.
For everything else, emit the _chk variant.
This simplifies most of the fortified function implementations and at
the same time, ensures that only one call from _chk or the regular
function is emitted.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
In the context of a function definition, the size hints imply that the
size of an object pointed to by one parameter is another parameter.
This doesn't make sense for the fortified versions of the functions
since that's the bit it's trying to validate.
This is harmless with __builtin_object_size since it has fairly simple
semantics when it comes to objects passed as function parameters.
With __builtin_dynamic_object_size we could (as my patchset for gcc[1]
already does) use the access attribute to determine the object size in
the general case but it misleads the fortified functions.
Basically the problem occurs when access attributes are present on
regular functions that have inline fortified definitions to generate
_chk variants; the attributes get inherited by these definitions,
causing problems when analyzing them. For example with poll(fds, nfds,
timeout), nfds is hinted using the __attr_access as being the size of
fds.
Now, when analyzing the inline function definition in bits/poll2.h, the
compiler sees that nfds is the size of fds and tries to use that
information in the function body. In _FORTIFY_SOURCE=3 case, where the
object size could be a non-constant expression, this information results
in the conclusion that nfds is the size of fds, which defeats the
purpose of the implementation because we're trying to check here if nfds
does indeed represent the size of fds. Hence for this case, it is best
to not have the access attribute.
With the attributes gone, the expression evaluation should get delayed
until the function is actually inlined into its destinations.
Disable the access attribute for fortified function inline functions
when building at _FORTIFY_SOURCE=3 to make this work better. The
access attributes remain for the _chk variants since they can be used
by the compiler to warn when the caller is passing invalid arguments.
[1] https://gcc.gnu.org/pipermail/gcc-patches/2021-October/581125.html
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This is an internal function meant to return the number of avaliable
processor where the process can scheduled, different than the
__get_nprocs which returns a the system available online CPU.
The Linux implementation currently only calls __get_nprocs(), which
in tuns calls sched_getaffinity.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Copy regex-related files back from Gnulib, to fix a problem with
static checking of regex calls noted by Martin Sebor. This merges the
following changes:
* New macro __attribute_nonnull__ in misc/sys/cdefs.h, for use later
when copying other files back from Gnulib.
* Use __GNULIB_CDEFS instead of __GLIBC__ when deciding
whether to include bits/wordsize.h etc.
* Avoid duplicate entries in epsilon closure table.
* New regex.h macro _REGEX_NELTS to let regexec say that its pmatch
arg should contain nmatch elts. Use that for regexec, instead of
__attr_access (which is incorrect).
* New regex.h macro _Attr_access_ which is like __attr_access except
portable to non-glibc platforms.
* Add some DEBUG_ASSERTs to pacify gcc -fanalyzer and to catch
recently-fixed performance bugs if they recur.
* Add Gnulib-specific stuff to port the dynarray- and lock-using parts
of regex code to non-glibc platforms.
* Fix glibc bug 11053.
* Avoid some undefined behavior when popping an empty fail stack.
We stopped adding "Contributed by" or similar lines in sources in 2012
in favour of git logs and keeping the Contributors section of the
glibc manual up to date. Removing these lines makes the license
header a bit more consistent across files and also removes the
possibility of error in attribution when license blocks or files are
copied across since the contributed-by lines don't actually reflect
reality in those cases.
Move all "Contributed by" and similar lines (Written by, Test by,
etc.) into a new file CONTRIBUTED-BY to retain record of these
contributions. These contributors are also mentioned in
manual/contrib.texi, so we just maintain this additional record as a
courtesy to the earlier developers.
The following scripts were used to filter a list of files to edit in
place and to clean up the CONTRIBUTED-BY file respectively. These
were not added to the glibc sources because they're not expected to be
of any use in future given that this is a one time task:
https://gist.github.com/siddhesh/b5ecac94eabfd72ed2916d6d8157e7dchttps://gist.github.com/siddhesh/15ea1f5e435ace9774f485030695ee02
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
__REDIRECT and __THROW are not compatible with C++ due to the ordering of the
__asm__ alias and the throw specifier. __REDIRECT_NTH has to be used
instead.
Fixes commit 8a40aff86b ("io: Add time64 alias
for fcntl"), commit 82c395d91e ("misc: Add
time64 alias for ioctl"), commit b39ffab860
("Linux: Add time64 alias for prctl").
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tell the compiler that xmalloc family of allocators always return
non-NULL. xrealloc in locale/programs also always returns non-NULL,
but that conflicts with default realloc behaviour and that of xrealloc
in libsupport, so keep it as is for now and resolve the differences
later.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Remove all malloc hook uses from core malloc functions and move it
into a new library libc_malloc_debug.so. With this, the hooks now no
longer have any effect on the core library.
libc_malloc_debug.so is a malloc interposer that needs to be preloaded
to get hooks functionality back so that the debugging features that
depend on the hooks, i.e. malloc-check, mcheck and mtrace work again.
Without the preloaded DSO these debugging features will be nops.
These features will be ported away from hooks in subsequent patches.
Similarly, legacy applications that need hooks functionality need to
preload libc_malloc_debug.so.
The symbols exported by libc_malloc_debug.so are maintained at exactly
the same version as libc.so.
Finally, static binaries will no longer be able to use malloc
debugging features since they cannot preload the debugging DSO.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
As a result, is not necessary to specify __attribute__ ((nocommon))
on individual definitions.
GCC 10 defaults to -fno-common on all architectures except ARC,
but this change is compatible with older GCC versions and ARC, too.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
librt.so is no longer installed for PTHREAD_IN_LIBC, and tests
are not linked against it. $(librt) is introduced globally for
shared tests that need to be linked for both PTHREAD_IN_LIBC
and !PTHREAD_IN_LIBC.
GLIBC_PRIVATE symbols that were needed during the transition are
removed again.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
For !__ASSUME_TIME64_SYSCALLS there is no need to issue a 64-bit syscall
if the provided timeout fits in a 32-bit one. The 64-bit usage should
be rare since the timeout is a relative one. This also avoids the need
to use supports_time64() (which breaks the usage case of live migration
like CRIU or similar).
It also fixes an issue on 32-bit select call for !__ASSUME_PSELECT
(microblase with older kernels only) where the expected timeout
is a 'struct timeval' instead of 'struct timespec'.
Checked on i686-linux-gnu on a 4.15 kernel and on a 5.11 kernel
(with and without --enable-kernel=5.1) and on x86_64-linux-gnu.
Reviewed-by: Lukasz Majewski <lukma@denx.de>
