WG14 accepted the changes in N3105 to define wcstofN and wcstofNx
functions for C2x. Thus enable those for C2x (given also __GLIBC_USE
(IEC_60559_TYPES_EXT) and support for the relevant _FloatN / _FloatNx
type) rather than only for __USE_GNU.
Tested for x86_64.
WG14 recently accepted two additions to the printf/scanf %b/%B
support: there are now PRIb* and SCNb* macros in <inttypes.h>, and
printf %B is now an optional feature defined in normative text,
instead of recommended practice, with corresponding PRIB* macros that
can also be used to test whether that optional feature is supported.
See N3072 items 14 and 15 for details (those changes were accepted,
some other changes in that paper weren't).
Add the corresponding PRI* macros to glibc and update one place in the
manual referring to %B as recommended. (SCNb* should naturally be
added at the same time as the corresponding scanf %b support.)
Tested for x86_64 and x86.
For better debug experience use separate code block with extra
cfi_* directives to run child (same as in __clone3).
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Use the clone3 wrapper on ARC. It doesn't care about stack alignment.
All callers should provide an aligned stack.
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Between versions v2.11 and v2.12 struct ntptimeval got new fields.
That wasn't a problem because new function ntp_gettimex was created
(and made default) to support new struct. Old ntp_gettime was not
using new fields so it was safe to call with old struct
definition. Then commits 5613afe9e3 and b6ad64b907 (added for
64 bit time_t support), ntp_gettime start setting new fields.
Sets fields manually to maintain compatibility with v2.11 struct
definition.
Resolves#30156
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
It was possible to run this test individually and have it fail because
it can't find testobj1.so. This patch adds that dependency, to prevent
such issues.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Some toolchains, such as that used on Gentoo Hardened, set -z now out of
the box. This trips up a couple of tests.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Remove simple_strcspn/strpbrk/strsep which are significantly slower than the
generic implementations. Also remove oldstrsep and oldstrtok since they are
practically identical to the generic implementation. Adjust iteration count
to reduce benchmark time.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Remove memchr_strnlen since it is now the same as generic_strnlen. Adjust
iteration count to reduce benchmark time. Keep memchr_strlen since the
generic strlen does not use memchr.
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
git commit 0849eed45d ("malloc: Move MORECORE fallback mmap to
sysmalloc_mmap_fallback") moved a block of code from sysmalloc to a
new helper function sysmalloc_mmap_fallback(), but 'pagesize' is used
for the 'minsize' argument and 'MMAP_AS_MORECORE_SIZE' for the
'pagesize' argument.
Fixes: 0849eed45d ("malloc: Move MORECORE fallback mmap to sysmalloc_mmap_fallback")
Signed-off-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
according to man-pages-posix-2017, shm_open() function may fail if the length
of the name argument exceeds {_POSIX_PATH_MAX} and set ENAMETOOLONG
Signed-off-by: abushwang <abushwangs@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
To avoid possible failure if any parent set any initial signal
disposition as SIG_IGN (for instance if the testcase is issued
with nohup).
Checked on x86_64-linux-gnu.
Tested-by: Florian Weimer <fweimer@redhat.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
We made tst-system.c depend on pthread, but that requires linking with
$(shared-thread-library). It does not fail under Linux because the
variable expands to nothing under Linux, but it fails for Hurd.
I tested verified via cross-compiling that "make check" now works
for Hurd.
Signed-off-by: Adam Yi <ayi@janestreet.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Recorded in [BZ #30183]:
1. export GLIBC_TUNABLES=glibc.cpu.hwcaps=-AVX512
2. Add _dl_printf("p -- %s\n", p); just before switch(nl) in
sysdeps/x86/cpu-tunables.c
3. compiled and run ./testrun.sh /usr/bin/ls
you will get:
p -- -AVX512
p -- LC_ADDRESS=en_US.UTF-8
p -- LC_NUMERIC=C
...
The function, TUNABLE_CALLBACK (set_hwcaps)
(tunable_val_t *valp), checks far more than it should and it
should stop at end of "-AVX512".
Fix bug that SIGCHLD is erroneously blocked forever in the following
scenario:
1. Thread A calls system but hasn't returned yet
2. Thread B calls another system but returns
SIGCHLD would be blocked forever in thread B after its system() returns,
even after the system() in thread A returns.
Although POSIX does not require, glibc system implementation aims to be
thread and cancellation safe. This bug was introduced in
5fb7fc9635 when we moved reverting signal
mask to happen when the last concurrently running system returns,
despite that signal mask is per thread. This commit reverts this logic
and adds a test.
Signed-off-by: Adam Yi <ayi@janestreet.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Before this change, sgetsgent_r did not set errno to ERANGE, but
sgetsgent only check errno, not the return value from sgetsgent_r.
Consequently, sgetsgent did not detect any error, and reported
success to the caller, without initializing the struct sgrp object
whose address was returned.
This commit changes sgetsgent_r to set errno as well. This avoids
similar issues in applications which only change errno.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This patch updates the kernel version in the tests tst-mman-consts.py,
tst-mount-consts.py and tst-pidfd-consts.py to 6.2. (There are no new
constants covered by these tests in 6.2 that need any other header
changes, and the removed MAP_VARIABLE for hppa was addressed
separately.)
Tested with build-many-glibcs.py.
The __builtin_arm_uqsub8 is an internal GCC builtin which might change
in future release (the correct way is to include "arm_acle.h" and use
__uqsub8 ()). Since not all compilers support it, just use the
inline assembler instead.
Checked on armv7a-linux-gnueabihf.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
The generic implementation already cover word access along with
cmpbge for both aligned and unaligned, so use it instead.
Checked qemu static for alpha-linux-gnu.
The default, and power7 implementation just adds word aligned
access when inputs have the same aligment. The unaligned case
is still done by byte operations.
This is already covered by the generic implementation, which also add
the unaligned input optimization.
Checked on powerpc64-linux-gnu built without multi-arch for powerpc64,
power7, power8, and power9 (build for le).
Reviewed-by: Rajalakshmi Srinivasaraghavan <rajis@linux.ibm.com>
The default, power4, and power7 implementation just adds word aligned
access when inputs have the same aligment. The unaligned case
is still done by byte operations.
This is already covered by the generic implementation, which also add
the unaligned input optimization.
Checked on powerpc-linux-gnu built without multi-arch for powerpc,
power4, and power7.
Reviewed-by: Rajalakshmi Srinivasaraghavan <rajis@linux.ibm.com>
C2x adds binary integer constants starting with 0b or 0B, and supports
those constants for the %i scanf format (in addition to the %b format,
which isn't yet implemented for scanf in glibc). Implement that scanf
support for glibc.
As with the strtol support, this is incompatible with previous C
standard versions, in that such an input string starting with 0b or 0B
was previously required to be parsed as 0 (with the rest of the input
potentially matching subsequent parts of the scanf format string).
Thus this patch adds 12 new __isoc23_* functions per long double
format (12, 24 or 36 depending on how many long double formats the
glibc configuration supports), with appropriate header redirection
support (generally very closely following that for the __isoc99_*
scanf functions - note that __GLIBC_USE (DEPRECATED_SCANF) takes
precedence over __GLIBC_USE (C2X_STRTOL), so the case of GNU
extensions to C89 continues to get old-style GNU %a and does not get
this new feature). The function names would remain as __isoc23_* even
if C2x ends up published in 2024 rather than 2023.
When scanf %b support is added, I think it will be appropriate for all
versions of scanf to follow C2x rules for inputs to the %b format
(given that there are no compatibility concerns for a new format).
Tested for x86_64 (full glibc testsuite). The first version was also
tested for powerpc (32-bit) and powerpc64le (stdio-common/ and wcsmbs/
tests), and with build-many-glibcs.py.
Starting with commit
b2c474f8de
"x86: Fix strncat-avx2.S reading past length [BZ #30065]"
Building on s390 the test fails due warnings like:
In function ‘do_one_test’,
inlined from ‘do_overflow_tests’ at test-strncat.c:175:7:
test-strncat.c:31:18: error: ‘strnlen’ specified bound [4294966546, 4294967295] exceeds maximum object size 2147483647 [-Werror=stringop-overflow=]
31 | # define STRNLEN strnlen
| ^
test-strncat.c:83:16: note: in expansion of macro ‘STRNLEN’
83 | size_t len = STRNLEN (src, n);
| ^~~~~~~
In all werror cases, the call to strnlen (.., SIZE_MAX) is inlined.
Therefore this patch just marks the do_one_test function as noinline.
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
When building with -O3 on s390x/x86_64, I get this stringop-truncation warning
which leads to a build fail:
In function ‘nis_local_host’,
inlined from ‘nis_local_host’ at nis_local_names.c:147:1:
nis_local_names.c:171:11: error: ‘strncpy’ output may be truncated copying between 0 and 1023 bytes from a string of length 1024 [-Werror=stringop-truncation]
171 | strncpy (cp, nis_local_directory (), NIS_MAXNAMELEN - len -1);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We can just ignore this warning as the hostname + '.' + directory-name + '\0' always fits
in __nishostname with length of (NIS_MAXNAMELEN + 1) as there is the runtime check above.
Furthermore as we already know the length of the directory-name, we can also just use
memcpy to copy the directory-name inclusive the NUL-termination.
Note: This werror was introduced with commit
32c7acd464
"Replace rawmemchr (s, '\0') with strchr"
Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Before GCC r13-2728, it would produce a normal dynamic-linked executable
with -static-pie. I mistakely believed it would produce a static-linked
executable, so failed to detect the breakage. Then with Binutils 2.40
and (vanilla) GCC 12, libc_cv_static_pie_on_loongarch is mistakenly
enabled and cause a building failure with "undefined reference to
_DYNAMIC".
Fix the issue by disabling static PIE if -static-pie creates something
with a INTERP header.
Also, fix a couple of typos. No functional change.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230301162355.426887-2-bugaevc@gmail.com>
"We don't need it any more"
The INTR_MSG_TRAP macro in intr-msg.h used to play little trick with
the stack pointer: it would temporarily save the "real" stack pointer
into ecx, while setting esp to point to just before the message buffer,
and then invoke the mach_msg trap. This way, INTR_MSG_TRAP reused the
on-stack arguments laid out for the containing call of
_hurd_intr_rpc_mach_msg (), passing them to the mach_msg trap directly.
This, however, required special support in hurdsig.c and trampoline.c,
since they now had to recognize when a thread is inside the piece of
code where esp doesn't point to the real tip of the stack, and handle
this situation specially.
Commit 1d20f33ff4 has removed the actual
temporary change of esp by actually re-pushing mach_msg arguments onto
the stack, and popping them back at end. It did not, however, deal with
the rest of "the ecx kludge" code in other files, resulting in potential
crashes if a signal arrives in the middle of pushing arguments onto the
stack.
Fix that by removing "the ecx kludge". Instead, when we want a thread
to skip the RPC, but cannot make just make it jump to after the trap
since it's not done adjusting the stack yet, set the SYSRETURN register
to MACH_SEND_INTERRUPTED (as we do anyway), and rely on the thread
itself for detecting this case and skipping the RPC.
This simplifies things somewhat and paves the way for a future x86_64
port of this code.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230301162355.426887-1-bugaevc@gmail.com>
The input argument passes an invalid string without a NUL terminator
on crypt settings inputs, which might lead to invalid OOB on strncmp.
Implementations only assume there is a NUL terminator if the string is
shorter than the specified size, so strings don't need to always be NUL
terminated (stratcliff.c has tests for this).
Also adapt the code to use libsupport.
Checked on arm-linux-gnuabihf.
The _FPU_SETCW and _FPU_GETCW macros are defined with inline assemblies.
They use the sfpc and efpc instructions, respectively. But both contain
a spurious second operand that leads to a compile error with Clang.
Removing this operand works both with gcc/gas (since binutils 2.18) as
well as with clang/llvm.
Needed due to recent commits:
- "added pair of inputs for hypotf in binary32"
commit ID cf7ffdd8a5
- "update auto-libm-test-out-hypot"
commit ID 3efbf11fdf
Linux 6.2 adds six new Arm HWCAP values and two new HWCAP2 values; add
them to glibc's Arm bits/hwcap.h, with corresponding dl-procinfo.c and
dl-procinfo.h updates.
Tested with build-many-glibcs.py for arm-linux-gnueabi.
This is for future-proofing. On i386, it is 4-byte aligned anyway, but
on x86_64, we want it 8-byte aligned, not 4-byte aligned.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230214173722.428140-4-bugaevc@gmail.com>
Update libm test ulps for
commit 3efbf11fdf
Author: Paul Zimmermann <Paul.Zimmermann@inria.fr>
Date: Tue Feb 14 11:24:59 2023 +0100
update auto-libm-test-out-hypot
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
This patch implements the LoongArch specific math barriers in order to omit
the store and load from stack if possible.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
