Following the previous work by Carlos O'Donell the category of LC_CTYPE
is correctly set to "i18n:2012" rather than "unicode:2014" and the
i18n_ctype file is once again regenerated from scratch to make sure it
does not contain any manual additions except the copyright message.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* localedata/unicode-gen/gen_unicode_ctype.py (output_head):
category of LC_CTYPE set to "i18n:2012".
* localedata/locales/i18n_ctype: Regenerate.
sigprocmask.c, sigtimedwait.c, sigwait.c and sigwaitinfo.c files from
sysdeps/unix/sysv/linux include nptl-signals.h via nptl/pthreadP.h,
and so SIGCANCEL and SIGSETXID become defined unconditionally. But
later in the code, there are some checks weither symbols defined,
which is useless. This patch removes useless checks.
Checked on x86_64-linux-gnu.
* sysdeps/unix/sysv/linux/sigprocmask.c: Remove useless #ifdefs.
* sysdeps/unix/sysv/linux/sigtimedwait.c: Likewise.
* sysdeps/unix/sysv/linux/sigwait.c: Likewise.
* sysdeps/unix/sysv/linux/sigwaitinfo.c: Likewise.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Reviewed-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
ia64, s390-64, sparc64 and x86_64 host their own implementation of
sigpending() in corresponding files, but they are identical to generic
linux file despite few comments. This patch removes that files, so the
implementation of sigpending() is taken from sysdeps/unix/sysv/linux
for all ports.
Build-tested on x86_64.
* sysdeps/unix/sysv/linux/ia64/sigpending.c: Remove file.
* sysdeps/unix/sysv/linux/s390/s390-64/sigpending.c: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/sigpending.c: Likewise.
* sysdeps/unix/sysv/linux/x86_64/sigpending.c: Likewise.
Signed-off-by: Yury Norov <ynorov@caviumnetworks.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Continuing the preparation for additional _FloatN / _FloatNx type
support, this patch adds an additional case in the definition of
__MATH_EVAL_FMT2, as used in defining iseqsig: when
__FLT_EVAL_METHOD__ is 0 or 32, it adds 0.0f to the arguments, so that
the correct function would be selected in the case of _Float16
arguments with excess precision (were glibc to support _Float16, which
of course __MATH_TG and other facilities do not at present - and
_Float16 support is not part of what this patch series is aiming for,
but this particular fix is simple so is included anyway).
Tested for x86_64.
* math/math.h
[__FLT_EVAL_METHOD__ == 0 || __FLT_EVAL_METHOD__ == 32]
(__MATH_EVAL_FMT2): Define to add 0.0f.
This is another one where we'll be wanting the base symbols for
powerpc64le rather than just a power7 variant.
* sysdeps/powerpc/powerpc64/multiarch/strncase_l-power7.c: Include
string/strncase_l.c, not string/strncase.c.
(USE_IN_EXTENDED_LOCALE_MODEL): Don't define.
(libc_hidden_def): Redefine.
The routine being assembled here is strcasecmp_l, so ask for that via
__STRCMP and STRCMP defines. That change means tweaking the power7
override. Needed for later powerpc64le changes where we want the base
symbols, not just a power7 variant.
* sysdeps/powerpc/powerpc64/multiarch/strcasecmp_l-power7.S:
(__STRCMP, STRCMP, __strcasecmp_l): Define.
(__strcasecmp): Don't define.
These functions aren't used in ld.so at the moment since we don't have
strcmp or strncmp ifuncs for them there. Remove the ld.so bloat.
* sysdeps/powerpc/powerpc64/multiarch/strcmp-power8.S: Wrap in
IS_IN (libc).
* sysdeps/powerpc/powerpc64/multiarch/strcmp-power9.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncmp-power8.S: Likewise.
* sysdeps/powerpc/powerpc64/multiarch/strncmp-power9.S: Likewise.
USE_AS_STPNCPY is defined by sysdeps/powerpc/powerpc64/power8/stpncpy.S,
included by this file.
* sysdeps/powerpc/powerpc64/multiarch/stpncpy-power8.S: Don't define
USE_AS_STPNCPY.
It seems to me that libc.a should not contain any of the __GI_
symbols, and certainly --enable-multi-arch ought to not add to the
list. At the end of this patch series we have the following in both
--enable-multi-arch and --disable-multi-arch libc.a:
0000000000000000 T __GI___readdir64
0000000000000000 T __GI___fxstatat64
0000000000000000 T __GI_getrlimit
0000000000000000 T __GI___getrlimit
* sysdeps/powerpc/powerpc64/fpu/multiarch/s_isnan-ppc64.S (hidden_def):
Redefine only when SHARED.
Continuing the preparation for additional _FloatN / _FloatNx type
support, this patch extends the includes of <bits/math-finite.h> to
cover all such types, under conditions analogous to those for
_Float128.
Tested for x86_64.
* math/math.h [__HAVE_DISTINCT_FLOAT16 || (__HAVE_FLOAT16 && !_LIBC)]:
Include <bits/math-finite.h> with appropriate macros defined and
undefined.
[__HAVE_DISTINCT_FLOAT32 || (__HAVE_FLOAT32 && !_LIBC)]: Likewise.
[__HAVE_DISTINCT_FLOAT64 || (__HAVE_FLOAT64 && !_LIBC)]: Likewise.
[__HAVE_DISTINCT_FLOAT32X || (__HAVE_FLOAT32X && !_LIBC)]: Likewise.
[__HAVE_DISTINCT_FLOAT64X || (__HAVE_FLOAT64X && !_LIBC)]: Likewise.
[__HAVE_DISTINCT_FLOAT128X || (__HAVE_FLOAT128X && !_LIBC)]: Likewise.
math.h has a macro _Mlong_double_ for the type to use when declaring
long double functions, and similar macros for other types.
math/Makefile uses -D_Mlong_double_=double in the case of long double
having the same ABI as double.
This originates with:
Mon Jul 8 13:37:40 1996 Roland McGrath <roland@delasyd.gnu.ai.mit.edu>
* math/math.h (_Mfloat_, _Mlong_double_): New macros, defined iff not
already defined to float, long double. Use those macros for _Mdouble_
defns when including mathcalls.h.
* math/Makefile [$(long-double-fcts) != yes] (CPPFLAGS): Append
-D_Mlong_double_=double.
However, math.h stopped declaring long double functions in the case of
long double having the same ABI as double (and thus probably stopped
actually needing the Makefile definition of _Mlong_double_) with:
1998-11-05 Ulrich Drepper <drepper@cygnus.com>
* math/math.h: Unconditionally include bits/mathdef.h. Declare
long double functions only if __NO_LONG_DOUBLE_MATH is not
defined.
* sysdeps/generic/bits/mathdef.h: Define only if __USE_ISOC9X.
Define __NO_LONG_DOUBLE_MATH.
* sysdeps/m68k/fpu/bits/mathdef.h: Define only if __USE_ISOC9X.
* sysdeps/i386/fpu/bits/mathdef.h: Likewise.
The declarations were since restored for compiling user code, but
remain absent when _LIBC is defined, which is sufficient to avoid
problems declaring function aliases of incompatible types. Thus the
indirection through the _Mlong_double_ macro is not needed (probably
since that 1998 patch), and this patch removes _Mlong_double_ and
associated macros for other types, leaving only the macro _Mdouble_
which is actually used as the type for which a given inclusion of
<bits/mathcalls.h> should declared functions.
Tested for x86_64, and tested with build-many-glibcs.py that installed
stripped shared libraries are unchanged by this patch.
* math/math.h [!_Mfloat_] (_Mfloat_): Do not define.
[!_Mlong_double_] (_Mlong_double_): Likewise.
[!_Mfloat16_] (_Mfloat16_): Likewise.
[!_Mfloat32_] (_Mfloat32_): Likewise.
[!_Mfloat64_] (_Mfloat64_): Likewise.
[!_Mfloat128_] (_Mfloat128_): Likewise.
[!_Mfloat32x_] (_Mfloat32x_): Likewise.
[!_Mfloat64x_] (_Mfloat64x_): Likewise.
[!_Mfloat128x_] (_Mfloat128x_): Likewise.
(_Mdouble_): Define without indirection through those macros.
* math/complex.h [!_Mfloat_] (_Mfloat_): Do not define.
[!_Mfloat128_] (_Mfloat128_): Likewise.
[_Mlong_double_] (_Mlong_double_): Likewise.
(_Mdouble_): Define without indirection through those macros.
* math/Makefile [$(long-double-fcts) != yes] (math-CPPFLAGS): Do
not add -D_Mlong_double_=double.
* include/math.h [_ISOMAC] (_Mlong_double_): Do not undefine.
* math/test-signgam-finite-c99.c (_Mlong_double_): Likewise.
i586 strcpy.S used a clever trick with LEA to implement jump table:
/* ECX has the last 2 bits of the address of source - 1. */
andl $3, %ecx
call 2f
2: popl %edx
/* 0xb is the distance between 2: and 1:. */
leal 0xb(%edx,%ecx,8), %ecx
jmp *%ecx
.align 8
1: /* ECX == 0 */
orb (%esi), %al
jz L(end)
stosb
xorl %eax, %eax
incl %esi
/* ECX == 1 */
orb (%esi), %al
jz L(end)
stosb
xorl %eax, %eax
incl %esi
/* ECX == 2 */
orb (%esi), %al
jz L(end)
stosb
xorl %eax, %eax
incl %esi
/* ECX == 3 */
L(1): movl (%esi), %ecx
leal 4(%esi),%esi
This fails if there are instruction length changes before L(1):. This
patch replaces it with conditional branches:
cmpb $2, %cl
je L(Src2)
ja L(Src3)
cmpb $1, %cl
je L(Src1)
L(Src0):
which have similar performance and work with any instruction lengths.
Tested on i586 and i686 with and without --disable-multi-arch.
[BZ #22353]
* sysdeps/i386/i586/strcpy.S (STRCPY): Use conditional branches.
(1): Renamed to ...
(L(Src0)): This.
(L(Src1)): New.
(L(Src2)): Likewise.
(L(1)): Renamed to ...
(L(Src3)): This.
[BZ #19485]
* localedata/locales/csb_PL (LC_TIME): Fix “abmon” for March
and use a better translation for March in “mon”.
* localedata/locales/csb_PL: Use more ASCII to improve the
readability of the source.
[BZ #13953]
* localedata/locales/km_KH: Use ASCII as much
as possible for better readability of the source and
remove useless comments.
* localedata/locales/km_KH (LC_TIME): Remove era stuff, it
was commented out and apparently wrong anyway because it was
using Lao characters. If Buddhist era should be used
for km_KH, a native speaker should write the correct formaat
for Khmer.
* localedata/locales/km_KH (LC_TIME): Add first_weekday 1
(According to CLDR, the first weekday for Cambodia is Sunday).
* localedata/locales/km_KH (LC_NAME): Remove name_mr and name_mrs
(These were using Lao characters which must be wrong. If we get
the correct data from a native speaker, we could add it back, until
then it is better not to have name_mr and name_mrs at all than
having it wrong).
There were several problems with checking the array size in the past,
for example BZ#356, caused by incorrectly assuming that every locale
token represents one element. In fact, if a token represented
a subarray, for example an array of month names or characters category
and it appeared at the end of the array the compiler assumed that
the array ends just after the first element of the subarray.
A workaround used in the past was to skip some categories while testing,
for example LC_CTYPE. Now when we are about to add alternative month
names to LC_TIME (BZ#10871) this will fail again.
* locale/loadlocale.c: Correct size of
_nl_value_type_LC_<category> arrays.
Reviewed-by: Zack Weinberg <zackw@panix.com>
Continuing the preparation for additional _FloatN / _FloatNx type
support, this patch arranges for <bits/mathcalls.h> and
<bits/mathcalls-helper-functions.h> to be included for each such type
under conditions and with macros defined corresponding to those
already present for _Float128.
Tested for x86_64.
* math/math.h [__HAVE_DISTINCT_FLOAT16 || (__HAVE_FLOAT16 && !_LIBC)]:
Include <bits/mathcalls-helper-functions.h> and <bits/mathcalls.h>
with appropriate macros defined and undefined.
[__HAVE_DISTINCT_FLOAT32 || (__HAVE_FLOAT32 && !_LIBC)]: Likewise.
[__HAVE_DISTINCT_FLOAT64 || (__HAVE_FLOAT64 && !_LIBC)]: Likewise.
[__HAVE_DISTINCT_FLOAT32X || (__HAVE_FLOAT32X && !_LIBC)]: Likewise.
[__HAVE_DISTINCT_FLOAT64X || (__HAVE_FLOAT64X && !_LIBC)]: Likewise.
[__HAVE_DISTINCT_FLOAT128X || (__HAVE_FLOAT128X && !_LIBC)]: Likewise.
[BZ #15260]
* localedata/locales/doi_IN (LC_MESSAGES): Match only for the
first letters of yesstr and nostr in yesexpr and noexpr,
not for the full words.
* localedata/locales/hne_IN (LC_MESSAGES): Likewise.
* localedata/locales/kok_IN (LC_MESSAGES): Likewise.
* localedata/locales/mr_IN (LC_MESSAGES): Likewise.
* localedata/locales/sat_IN (LC_MESSAGES): Likewise.
* localedata/locales/km_KH (LC_MESSAGES): Match also for the
first letters of yesstr and nostr in yesexpr and noexpr,
until now only English was matched in yesexpr and noexpr.
* localedata/locales/tl_PH (LC_MESSAGES): Use “copy "fil_PH"”
instead of “copy "en_US"”. CLDR has yesstr and nostr data for
fil but not for tl. As tl and fil are very similar, using fil
is probably better than using English.
Pablo was l10n/i18n coordinator back in the old days but MandrakeSoft is
dead now
* localedata/locales/br_FR (LC_IDENTIFICATON): Add
Thierry Vignaud <thierry.vignaud@gmail.com> as the contact
for the br_FR locale.
"Ket" is the the most used negative answer, as it's the negative answer
to a positively phrased question
It's used as it or with the verb ("Ne ran ket", ...)
As such, "Ket" is used in most translations.
"Nann" is less used as it's the negative answer to a negatively phrased
question
See https://en.wikipedia.org/wiki/Yes_and_no for explanations about
languages with 3 or 4 form systems.
We still keep "Nn" for short answers as:
- new learners are used to "Non" in french
- and they often misuses "Nann"
- for compatibility with english
[BZ #21706]
* localedata/locales/br_FR (LC_MESSAGES): Fix nostr.
From localedef --help:
Output control:
...
--no-warnings=<warnings> Comma-separated list of warnings to disable;
supported warnings are: ascii, intcurrsym
...
--warnings=<warnings> Comma-separated list of warnings to enable;
supported warnings are: ascii, intcurrsym
Locales using SHIFT_JIS and SHIFT_JISX0213 character maps are not ASCII
compatible. In order to build locales using these character maps, and
have localedef exit with a status of 0, we add new option to localedef
to disable or enable specific warnings. The options are --no-warnings
and --warnings, to disable and enable specific warnings respectively.
The options take a comma-separated list of warning names. The warning
names are taken directly from the generated warning. When a warning
that can be disabled is issued it will print something like this: foo is
not defined [--no-warnings=foo]
For the initial implementation we add two controllable warnings; first
'ascii' which is used by the localedata installation makefile target to
install SHIFT_JIS and SHIFT_JISX0213-using locales without error; second
'intcurrsym' which allows a program to use a non-standard international
currency symbol without triggering a warning. The 'intcurrsym' is
useful in the future if country codes are added that are not in our
current ISO 4217 list, and the user wants to avoid the warning. Having
at least two warnings to control gives an example for how the changes
can be extended to more warnings if required in the future.
These changes allow ja_JP.SHIFT_JIS and ja_JP.SHIFT_JISX0213 to be
compiled without warnings using --no-warnings=ascii. The
localedata/Makefile $(INSTALL-SUPPORTED-LOCALES) target is adjusted to
automatically add `--no-warnings=ascii` for such charmaps, and likewise
localedata/gen-locale.sh is adjusted with similar logic.
v2: Bring verbose, be_quiet, and all warning control booleans into
record-status.c, and compile this object file to be used by locale,
iconv, and localedef. Any users include record-status.h.
v3: Fix an instance of boolean coercion in set_warning().
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
The localedata collation test data is encoded in a particular
character set. We rename the test data to match the full locale
name with encoding, and adjust the Makefile and sort-test.sh
script. This allows us to have a future C.UTF-8 test that is
disambiguated from the built-in C locale.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
After the transition to generating a distinct file for Unicode ctype
information e.g. i18n_ctype, the check target was left with the wrong
target name. This patch fixes the check target and regenerates the
files with more information than previously used, filling in the the
LC_IDENTIFICATION data.
Tested on x86_64 by regenerating from Unicode source files, and
running checks. Tested by subsequently rebuilding all locales.
No regressions in testsuite.
Signed-off-by: Carlos O'Donell <carlos@redhat.com>
Reported-by: Rafal Luzynski <digitalfreak@lingonborough.com>
POWER9 DD2.1 and earlier has an issue where some cache inhibited
vector load traps to the kernel, causing a performance degradation. To
handle this in memcpy and memmove, lvx/stvx is used for aligned
addresses instead of lxvd2x/stxvd2x.
Reference: https://patchwork.ozlabs.org/patch/814059/
* sysdeps/powerpc/powerpc64/power7/memcpy.S: Replace
lxvd2x/stxvd2x with lvx/stvx.
* sysdeps/powerpc/powerpc64/power7/memmove.S: Likewise.
Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.vnet.ibm.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* localedata/locales/hi_IN (LC_MESSAGES): In yesexpr and noexpr,
also check for the first characters of yesstr and nostr.
* localedata/locales/kn_IN (LC_MESSAGES): Likewise.
* localedata/locales/ks_IN@devanagari (LC_MESSAGES): Likewise.
* localedata/locales/chr_US (LC_MESSAGES): In yesexpr and noexpr,
match also for the contents of yesstr and nostr. As the first letter
of yesstr and nostr is equal, checking only for the first letter
is not enough.
* localedata/locales/ug_CN (LC_MESSAGES): Fix noexpr and yesexpr
by including the first letters of nostr and yesexpr in the regexp.
Also make it more readable by using ASCII where possible.
* localedata/locales/te_IN (LC_MESSAGES): Fix noexpr by including
the first letter of nostr in the regexp. It agrees with CLDR now.
Also make it more readable by using ASCII where possible.
