Success is reported with a 0 return value, and failure is -1.
Enhance the kitchen sink test elf/tst-audit28 to cover
_dl_find_object as well.
Fixes commit 5d28a8962d ("elf: Add _dl_find_object function")
and bug 30515.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
The trim_threshold is too aggressive a heuristic to decide if chunk
reuse is OK for reallocated memory; for repeated small, shrinking
allocations it leads to internal fragmentation and for repeated larger
allocations that fragmentation may blow up even worse due to the dynamic
nature of the threshold.
Limit reuse only when it is within the alignment padding, which is 2 *
size_t for heap allocations and a page size for mmapped allocations.
There's the added wrinkle of THP, but this fix ignores it for now,
pessimizing that case in favor of keeping fragmentation low.
This resolves BZ #30579.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reported-by: Nicolas Dusart <nicolas@freedelity.be>
Reported-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Some locales define a list of mapping pairs of alternate digits and
separators for input digits (to_inpunct). This require the scanf
to create a list of all possible inputs for the optional type
modifier 'I'.
Checked on x86_64-linux-gnu.
Reviewed-by: Joe Simmons-Talbott <josimmon@redhat.com>
In processing the first 7 individual characters of the mode for fopen
if ,ccs= is used those characters will be processed as well. Stop
processing individual mode flags once a comma is encountered. This has
the effect of requiring ,ccs= to be the last mode flag in the mode
string. Add a testcase to check that the ,ccs= mode flag is not
processed as individual mode flags.
Reviewed-by: DJ Delorie <dj@redhat.com>
Return value from *scanf and *asprintf routines are now properly checked
in test-scanf-ldbl-compat-template.c and test-printf-ldbl-compat.c.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The change is meant to avoid unwanted PLT entry for the fgets_unlocked
routine when _FORTIFY_SOURCE is set.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Move declarations from libio/bits/stdio.h to existing
libio/bits/stdio2-decl.h. This will enable future use of
__REDIRECT_FORTIFY in place of some __REDIRECT.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This allows to include bits/syslog-decl.h in include/sys/syslog.h and
therefore be able to create the libc_hidden_builtin_proto (__syslog_chk)
prototype.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The __fdelt_chk declaration needs to be available so that
libc_hidden_proto can be used while not redefining __FD_ELT.
Thus, misc/bits/select-decl.h is created to hold the corresponding
prototypes.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The change is meant to avoid unwanted PLT entries for the read_chk,
getdomainname_chk and getlogin_r_chk routines when _FORTIFY_SOURCE is set.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This change is similar to what was done for bits/wchar2.h.
Routines declaration are moved into a dedicated bits/unistd-decl.h file
which is then included into the bits/unistd.h file.
This will allow to adapt the files so that PLT entries are not created when
_FORTIFY_SOURCE is enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The change is meant to avoid unwanted PLT entries for the wmemset and
wcrtomb routines when _FORTIFY_SOURCE is set.
On top of that, ensure that *_chk routines have their hidden builtin
definitions available.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The __REDIRECT* macros are creating aliases which may lead to unwanted
PLT entries when fortification is enabled.
To prevent these entries, the REDIRECT alias should be set to point to the
existing __GI_* aliases.
This is done transparently by creating a __REDIRECT_FORTIFY* version of
these macros, that can be overwritten internally when necessary.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
If libc_hidden_builtin_{def,proto} isn't properly set for *_chk routines,
there are unwanted PLT entries in libc.so.
There is a special case with __asprintf_chk:
If ldbl_* macros are used for asprintf, ABI gets broken on s390x,
if it isn't, ppc64le isn't building due to multiple asm redirections.
This is due to the inclusion of bits/stdio-lbdl.h for ppc64le whereas it
isn't for s390x. This header creates redirections, which are not
compatible with the ones generated using libc_hidden_def.
Yet, we can't use libc_hidden_ldbl_proto on s390x since it will not
create a simple strong alias (e.g. as done on x86_64), but a versioned
alias, leading to ABI breakage.
This results in errors on s390x:
/usr/bin/ld: glibc/iconv/../libio/bits/stdio2.h:137: undefined reference
to `__asprintf_chk'
Original __asprintf_chk symbols:
00000000001395b0 T __asprintf_chk
0000000000177e90 T __nldbl___asprintf_chk
__asprintf_chk symbols with ldbl_* macros:
000000000012d590 t ___asprintf_chk
000000000012d590 t __asprintf_chk@@GLIBC_2.4
000000000012d590 t __GI___asprintf_chk
000000000012d590 t __GL____asprintf_chk___asprintf_chk
0000000000172240 T __nldbl___asprintf_chk
__asprintf_chk symbols with the patch:
000000000012d590 t ___asprintf_chk
000000000012d590 T __asprintf_chk
000000000012d590 t __GI___asprintf_chk
0000000000172240 T __nldbl___asprintf_chk
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
If libc_hidden_builtin_{def,proto} isn't properly set for *_chk routines,
there are unwanted PLT entries in libc.so.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The *_chk routines naming doesn't match the name that would be generated
using libc_hidden_ldbl_proto. Since the macro is needed for some of
these *_chk functions for _FORTIFY_SOURCE to be enabled, that needed to
be fixed.
While at it, all the *_chk function get renamed appropriately for
consistency, even if not strictly necessary.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Since the _FORTIFY_SOURCE feature uses some routines of Glibc, they need to
be excluded from the fortification.
On top of that:
- some tests explicitly verify that some level of fortification works
appropriately, we therefore shouldn't modify the level set for them.
- some objects need to be build with optimization disabled, which
prevents _FORTIFY_SOURCE to be used for them.
Assembler files that implement architecture specific versions of the
fortified routines were not excluded from _FORTIFY_SOURCE as there is no
C header included that would impact their behavior.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Add --enable-fortify-source option.
It is now possible to enable fortification through a configure option.
The level may be given as parameter, if none is provided, the configure
script will determine what is the highest level possible that can be set
considering GCC built-ins availability and set it.
If level is explicitly set to 3, configure checks if the compiler
supports the built-in function necessary for it or raise an error if it
isn't.
If the configure option isn't explicitly enabled, it _FORTIFY_SOURCE is
forcibly undefined (and therefore disabled).
The result of the configure checks are new variables, ${fortify_source}
and ${no_fortify_source} that can be used to appropriately populate
CFLAGS.
A dedicated patch will follow to make use of this variable in Makefiles
when necessary.
Updated NEWS and INSTALL.
Adding dedicated x86_64 variant that enables the configuration.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The current implementation of strerror is thread-safe, but this
has implications for the lifetime of the return string.
Describe the strerror_l function. Describe both variants of the
strerror_r function. Mention the lifetime of the returned string
for strerrorname_np and strerrordesc_np. Clarify that perror
output depends on the current locale.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Describe the problems with signed characters, and the glibc extension
to deal with most of them. Mention that the is* functions return
zero for the special argument EOF.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Now that abort no longer calls fflush there is no reason to avoid locking
the stdio streams anywhere. This fixes a conformance issue and potential
heap corruption during exit.
MAP_FIXED is defined to silently replace any existing mappings at the
address range being mapped over. This, however, is a dangerous, and only
rarely desired behavior.
Various Unix systems provide replacements or additions to MAP_FIXED:
* SerenityOS and Linux provide MAP_FIXED_NOREPLACE. If the address space
already contains a mapping in the requested range, Linux returns
EEXIST. SerenityOS returns ENOMEM, however that is a bug, as the
MAP_FIXED_NOREPLACE implementation is intended to be compatible with
Linux.
* FreeBSD provides the MAP_EXCL flag that has to be used in combination
with MAP_FIXED. It returns EINVAL if the requested range already
contains existing mappings. This is directly analogous to the O_EXCL
flag in the open () call.
* DragonFly BSD, NetBSD, and OpenBSD provide MAP_TRYFIXED, but with
different semantics. DragonFly BSD returns ENOMEM if the requested
range already contains existing mappings. NetBSD does not return an
error, but instead creates the mapping at a different address if the
requested range contains mappings. OpenBSD behaves the same, but also
notes that this is the default behavior even without MAP_TRYFIXED
(which is the case on the Hurd too).
Since the Hurd leans closer to the BSD side, add MAP_EXCL as the primary
API to request the behavior of not replacing existing mappings. Declare
MAP_FIXED_NOREPLACE and MAP_TRYFIXED as aliases of (MAP_FIXED|MAP_EXCL),
so any existing software that checks for either of those macros will
pick them up automatically. For compatibility with Linux, return EEXIST
if a mapping already exists.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230625231751.404120-5-bugaevc@gmail.com>
Zero address passed to mmap () typically means the caller doesn't have
any specific preferred address. Not so if MAP_FIXED is passed: in this
case 0 means literal 0. Fix this case to pass anywhere = 0 into vm_map.
Also add some documentation.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230625231751.404120-4-bugaevc@gmail.com>
Only call vm_deallocate when we do have the old buffer, and check for
unexpected errors.
Spotted while debugging a msgids/readdir issue on x86_64-gnu.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230625231751.404120-3-bugaevc@gmail.com>
The rest of the heap (backed by individual pages) is already mapped RW.
Mapping these pages RWX presents a security hazard.
Also, in another branch memory gets allocated using vm_allocate, which
sets memory protection to VM_PROT_DEFAULT (which is RW). The mismatch
between protections prevents Mach from coalescing the VM map entries.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230625231751.404120-2-bugaevc@gmail.com>
Instead of trying to allocate a thread stack at a specific address,
looping over the address space, just set the ANYWHERE flag in
vm_allocate (). The previous behavior:
- defeats ASLR (for Mach versions that support ASLR),
- is particularly slow if the lower 4 GB of the address space are mapped
inaccessible, as we're planning to do on 64-bit Hurd,
- is just silly.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230625231751.404120-1-bugaevc@gmail.com>
This follows 1d44530a5b ("string: strerror must not return NULL (bug 30555)"):
«
For strerror, this fixes commit 28aff04781 ("string:
Implement strerror in terms of strerror_l"). This commit avoids
returning NULL for strerror_l as well, although POSIX allows this
behavior for strerror_l.
»
Changing tst-cleanup4.c to use xread instead of read caused
the nptl/tst-cleanupx4 test to fail. The routines in libsupport.a
need to be built with exception handling and asynchronous unwind
table support.
v2: Use "CFLAGS-.oS" instead of "override CFLAGS".
GCC was the only compiler affected by the issue with
__builtin_isinf_sign and float128.
Fix BZ #30550.
Reported-by: Qiu Chaofan <qiucofan@cn.ibm.com>
Reviewed-by: Florian Weimer <fweimer@redhat.com>
The first segment in a shared library may be read-only, not executable.
To support LD_PREFER_MAP_32BIT_EXEC on such shared libraries, we also
check MAP_DENYWRITE to decide if MAP_32BIT should be passed to mmap.
Normally the first segment is mapped with MAP_COPY, which is defined
as (MAP_PRIVATE | MAP_DENYWRITE). But if the segment alignment is
greater than the page size, MAP_COPY isn't used to allocate enough
space to ensure that the segment can be properly aligned. Map the
first segment with MAP_COPY in this case to fix BZ #30452.
tm time struct contains tm_wday and tm_yday that were previously not
checked in this test. Also added new test cases for date formats
containing %D, %R or %h.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Optimised implementations for single and double precision, Advanced
SIMD and SVE, copied from Arm Optimized Routines.
As previously, data tables are used via a barrier to prevent
overly aggressive constant inlining. Special-case handlers are
marked NOINLINE to avoid incurring the penalty of switching call
standards unnecessarily.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Optimised implementations for single and double precision, Advanced
SIMD and SVE, copied from Arm Optimized Routines. Log lookup table
added as HIDDEN symbol to allow it to be shared between AdvSIMD and
SVE variants.
As previously, data tables are used via a barrier to prevent
overly aggressive constant inlining. Special-case handlers are
marked NOINLINE to avoid incurring the penalty of switching call
standards unnecessarily.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Optimised implementations for single and double precision, Advanced
SIMD and SVE, copied from Arm Optimized Routines.
As previously, data tables are used via a barrier to prevent
overly aggressive constant inlining. Special-case handlers are
marked NOINLINE to avoid incurring the penalty of switching call
standards unnecessarily.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Replace the loop-over-scalar placeholder routines with optimised
implementations from Arm Optimized Routines (AOR).
Also add some headers containing utilities for aarch64 libmvec
routines, and update libm-test-ulps.
Data tables for new routines are used via a pointer with a
barrier on it, in order to prevent overly aggressive constant
inlining in GCC. This allows a single adrp, combined with offset
loads, to be used for every constant in the table.
Special-case handlers are marked NOINLINE in order to confine the
save/restore overhead of switching from vector to normal calling
standard. This way we only incur the extra memory access in the
exceptional cases. NOINLINE definitions have been moved to
math_private.h in order to reduce duplication.
AOR exposes a config option, WANT_SIMD_EXCEPT, to enable
selective masking (and later fixing up) of invalid lanes, in
order to trigger fp exceptions correctly (AdvSIMD only). This is
tested and maintained in AOR, however it is configured off at
source level here for performance reasons. We keep the
WANT_SIMD_EXCEPT blocks in routine sources to greatly simplify
the upstreaming process from AOR to glibc.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Add --disable-encoding to makeinfo flags so that it does not generate
unicode quote glyphs.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Linux 6.4 adds the riscv_hwprobe syscall on riscv and enables
memfd_secret on s390. Update syscall-names.list and regenerate the
arch-syscall.h headers with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
Trying to mount procfs can fail due multiples reasons: proc is locked
due the container configuration, mount syscall is filtered by a
Linux Secuirty Module, or any other security or hardening mechanism
that Linux might eventually add.
The tests does require a new procfs without binding to parent, and
to fully fix it would require to change how the container was created
(which is out of the scope of the test itself). Instead of trying to
foresee any possible scenario, if procfs can not be mount fail with
unsupported.
Checked on aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The tst-ttyname-direct.c checks the ttyname with procfs mounted in
bind mode (MS_BIND|MS_REC), while tst-ttyname-namespace.c checks
with procfs mount with MS_NOSUID|MS_NOEXEC|MS_NODEV in a new
namespace.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This patch improves tests-clean Makefile target to reliably clean
test artifacts from a build directory. Before this patch tests-clean
missed around 3k (out of total 9k) .out and .test-result files.
Signed-off-by: Maxim Kuvyrkov <maxim.kuvyrkov@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
