Generated on a Cavium Octeon III 2 board running Linux version 4.19.249
and GCC 13.1.0.
Needed due to commit cf7ffdd8a5 ("added pair of inputs for hypotf in
binary32").
Starting with commit 2c6b4b272e
"nptl: Unconditionally use a 32-byte rseq area", the testcase
misc/tst-rseq-disable is UNSUPPORTED as RSEQ_SIG is not defined.
The mentioned commit removes inclusion of sys/rseq.h in nptl/descr.h.
Thus just include sys/rseq.h in the tst-rseq-disable.c as also done
in tst-rseq.c and tst-rseq-nptl.c.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Generated on a VisionFive 2 board running Linux version 6.4.2 and
GCC 13.1.0.
Needed due to commit cf7ffdd8a5 ("added pair of inputs for hypotf in
binary32").
Based on feedback by Mike Gilbert <floppym@gentoo.org>
Linux-6.1.38-dist x86_64 AMD Phenom-tm- II X6 1055T Processor
-march=amdfam10
failures occur for x32 ABI
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
On some machines we end up with incomplete cache information. This can
make the new calculation of `sizeof(total-L3)/custom-divisor` end up
lower than intended (and lower than the prior value). So reintroduce
the old bound as a lower bound to avoid potentially regressing code
where we don't have complete information to make the decision.
Reviewed-by: DJ Delorie <dj@redhat.com>
After:
```
commit af992e7abd
Author: Noah Goldstein <goldstein.w.n@gmail.com>
Date: Wed Jun 7 13:18:01 2023 -0500
x86: Increase `non_temporal_threshold` to roughly `sizeof_L3 / 4`
```
Split `shared` (cumulative cache size) from `shared_per_thread` (cache
size per socket), the `shared_per_thread` *can* be slightly off from
the previous calculation.
Previously we added `core` even if `threads_l2` was invalid, and only
used `threads_l2` to divide `core` if it was present. The changed
version only included `core` if `threads_l2` was valid.
This change restores the old behavior if `threads_l2` is invalid by
adding the entire value of `core`.
Reviewed-by: DJ Delorie <dj@redhat.com>
Based on feedback by Arsen Arsenović <arsen@gentoo.org>
Linux-6.1.38-gentoo-dist-hardened x86_64 AMD Ryzen 7 3800X 8-Core Processor
-march=x86-64-v2
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Bump autoconf requirement to 2.71 to allow regenerating configure on
more recent distributions. autoconf 2.71 has been in Fedora since F36
and is the current version in Debian stable (bookworm). It appears to
be current in Gentoo as well.
All sysdeps configure and preconfigure scripts have also been
regenerated; all changes are trivial transformations that do not affect
functionality.
Signed-off-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
It follows the internal signature:
extern int clone3 (struct clone_args *__cl_args, size_t __size,
int (*__func) (void *__arg), void *__arg);
Checked on s390x-linux-gnu and s390-linux-gnu.
The sparc ABI has multiple cases on how to handle JMP_SLOT relocations,
(sparc_fixup_plt/sparc64_fixup_plt). For BINDNOW, _dl_audit_symbind
will be responsible to setup the final relocation value; while for
lazy binding _dl_fixup/_dl_profile_fixup will call the audit callback
and tail cail elf_machine_fixup_plt (which will call
sparc64_fixup_plt).
This patch fixes by issuing the SPARC specific routine on bindnow and
forwarding the audit value to elf_machine_fixup_plt for lazy resolution.
It fixes the la_symbind for bind-now tests on sparc64 and sparcv9:
elf/tst-audit24a
elf/tst-audit24b
elf/tst-audit24c
elf/tst-audit24d
Checked on sparc64-linux-gnu and sparcv9-linux-gnu.
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
This patch checks if assembler supports vector instructions to
generate LASX/LSX code or not, and then define HAVE_LOONGARCH_VEC_ASM macro
We have added support for vector instructions in binutils-2.41
See:
https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=75b2f521b101d974354f6ce9ed7c054d8b2e3b7a
commit 75b2f521b101d974354f6ce9ed7c054d8b2e3b7a
Author: mengqinggang <mengqinggang@loongson.cn>
Date: Thu Jun 22 10:35:28 2023 +0800
LoongArch: gas: Add lsx and lasx instructions support
gas/ChangeLog:
* config/tc-loongarch.c (md_parse_option): Add lsx and lasx option.
(loongarch_after_parse_args): Add lsx and lasx option.
opcodes/ChangeLog:
* loongarch-opc.c (struct loongarch_ase): Add lsx and lasx
instructions.
Depending on build configuration, the [routine]-c.c files may be chosen
to provide fortified routines implementation. While [routines].c
implementation were automatically excluded, the [routines]-c.c ones were
not. This patch fixes that by adding these file to the list to be
filtered.
Return value from *scanf and *asprintf routines are now properly checked
in test-scanf-ldbl-compat-template.c and test-printf-ldbl-compat.c.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
This allows to include bits/syslog-decl.h in include/sys/syslog.h and
therefore be able to create the libc_hidden_builtin_proto (__syslog_chk)
prototype.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The change is meant to avoid unwanted PLT entries for the wmemset and
wcrtomb routines when _FORTIFY_SOURCE is set.
On top of that, ensure that *_chk routines have their hidden builtin
definitions available.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
If libc_hidden_builtin_{def,proto} isn't properly set for *_chk routines,
there are unwanted PLT entries in libc.so.
There is a special case with __asprintf_chk:
If ldbl_* macros are used for asprintf, ABI gets broken on s390x,
if it isn't, ppc64le isn't building due to multiple asm redirections.
This is due to the inclusion of bits/stdio-lbdl.h for ppc64le whereas it
isn't for s390x. This header creates redirections, which are not
compatible with the ones generated using libc_hidden_def.
Yet, we can't use libc_hidden_ldbl_proto on s390x since it will not
create a simple strong alias (e.g. as done on x86_64), but a versioned
alias, leading to ABI breakage.
This results in errors on s390x:
/usr/bin/ld: glibc/iconv/../libio/bits/stdio2.h:137: undefined reference
to `__asprintf_chk'
Original __asprintf_chk symbols:
00000000001395b0 T __asprintf_chk
0000000000177e90 T __nldbl___asprintf_chk
__asprintf_chk symbols with ldbl_* macros:
000000000012d590 t ___asprintf_chk
000000000012d590 t __asprintf_chk@@GLIBC_2.4
000000000012d590 t __GI___asprintf_chk
000000000012d590 t __GL____asprintf_chk___asprintf_chk
0000000000172240 T __nldbl___asprintf_chk
__asprintf_chk symbols with the patch:
000000000012d590 t ___asprintf_chk
000000000012d590 T __asprintf_chk
000000000012d590 t __GI___asprintf_chk
0000000000172240 T __nldbl___asprintf_chk
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
If libc_hidden_builtin_{def,proto} isn't properly set for *_chk routines,
there are unwanted PLT entries in libc.so.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The *_chk routines naming doesn't match the name that would be generated
using libc_hidden_ldbl_proto. Since the macro is needed for some of
these *_chk functions for _FORTIFY_SOURCE to be enabled, that needed to
be fixed.
While at it, all the *_chk function get renamed appropriately for
consistency, even if not strictly necessary.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Reviewed-by: Paul E. Murphy <murphyp@linux.ibm.com>
Since the _FORTIFY_SOURCE feature uses some routines of Glibc, they need to
be excluded from the fortification.
On top of that:
- some tests explicitly verify that some level of fortification works
appropriately, we therefore shouldn't modify the level set for them.
- some objects need to be build with optimization disabled, which
prevents _FORTIFY_SOURCE to be used for them.
Assembler files that implement architecture specific versions of the
fortified routines were not excluded from _FORTIFY_SOURCE as there is no
C header included that would impact their behavior.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
MAP_FIXED is defined to silently replace any existing mappings at the
address range being mapped over. This, however, is a dangerous, and only
rarely desired behavior.
Various Unix systems provide replacements or additions to MAP_FIXED:
* SerenityOS and Linux provide MAP_FIXED_NOREPLACE. If the address space
already contains a mapping in the requested range, Linux returns
EEXIST. SerenityOS returns ENOMEM, however that is a bug, as the
MAP_FIXED_NOREPLACE implementation is intended to be compatible with
Linux.
* FreeBSD provides the MAP_EXCL flag that has to be used in combination
with MAP_FIXED. It returns EINVAL if the requested range already
contains existing mappings. This is directly analogous to the O_EXCL
flag in the open () call.
* DragonFly BSD, NetBSD, and OpenBSD provide MAP_TRYFIXED, but with
different semantics. DragonFly BSD returns ENOMEM if the requested
range already contains existing mappings. NetBSD does not return an
error, but instead creates the mapping at a different address if the
requested range contains mappings. OpenBSD behaves the same, but also
notes that this is the default behavior even without MAP_TRYFIXED
(which is the case on the Hurd too).
Since the Hurd leans closer to the BSD side, add MAP_EXCL as the primary
API to request the behavior of not replacing existing mappings. Declare
MAP_FIXED_NOREPLACE and MAP_TRYFIXED as aliases of (MAP_FIXED|MAP_EXCL),
so any existing software that checks for either of those macros will
pick them up automatically. For compatibility with Linux, return EEXIST
if a mapping already exists.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230625231751.404120-5-bugaevc@gmail.com>
Zero address passed to mmap () typically means the caller doesn't have
any specific preferred address. Not so if MAP_FIXED is passed: in this
case 0 means literal 0. Fix this case to pass anywhere = 0 into vm_map.
Also add some documentation.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230625231751.404120-4-bugaevc@gmail.com>
Only call vm_deallocate when we do have the old buffer, and check for
unexpected errors.
Spotted while debugging a msgids/readdir issue on x86_64-gnu.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230625231751.404120-3-bugaevc@gmail.com>
The rest of the heap (backed by individual pages) is already mapped RW.
Mapping these pages RWX presents a security hazard.
Also, in another branch memory gets allocated using vm_allocate, which
sets memory protection to VM_PROT_DEFAULT (which is RW). The mismatch
between protections prevents Mach from coalescing the VM map entries.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230625231751.404120-2-bugaevc@gmail.com>
Instead of trying to allocate a thread stack at a specific address,
looping over the address space, just set the ANYWHERE flag in
vm_allocate (). The previous behavior:
- defeats ASLR (for Mach versions that support ASLR),
- is particularly slow if the lower 4 GB of the address space are mapped
inaccessible, as we're planning to do on 64-bit Hurd,
- is just silly.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Message-Id: <20230625231751.404120-1-bugaevc@gmail.com>
This follows 1d44530a5b ("string: strerror must not return NULL (bug 30555)"):
«
For strerror, this fixes commit 28aff04781 ("string:
Implement strerror in terms of strerror_l"). This commit avoids
returning NULL for strerror_l as well, although POSIX allows this
behavior for strerror_l.
»
The first segment in a shared library may be read-only, not executable.
To support LD_PREFER_MAP_32BIT_EXEC on such shared libraries, we also
check MAP_DENYWRITE to decide if MAP_32BIT should be passed to mmap.
Normally the first segment is mapped with MAP_COPY, which is defined
as (MAP_PRIVATE | MAP_DENYWRITE). But if the segment alignment is
greater than the page size, MAP_COPY isn't used to allocate enough
space to ensure that the segment can be properly aligned. Map the
first segment with MAP_COPY in this case to fix BZ #30452.
Optimised implementations for single and double precision, Advanced
SIMD and SVE, copied from Arm Optimized Routines.
As previously, data tables are used via a barrier to prevent
overly aggressive constant inlining. Special-case handlers are
marked NOINLINE to avoid incurring the penalty of switching call
standards unnecessarily.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Optimised implementations for single and double precision, Advanced
SIMD and SVE, copied from Arm Optimized Routines. Log lookup table
added as HIDDEN symbol to allow it to be shared between AdvSIMD and
SVE variants.
As previously, data tables are used via a barrier to prevent
overly aggressive constant inlining. Special-case handlers are
marked NOINLINE to avoid incurring the penalty of switching call
standards unnecessarily.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Optimised implementations for single and double precision, Advanced
SIMD and SVE, copied from Arm Optimized Routines.
As previously, data tables are used via a barrier to prevent
overly aggressive constant inlining. Special-case handlers are
marked NOINLINE to avoid incurring the penalty of switching call
standards unnecessarily.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Replace the loop-over-scalar placeholder routines with optimised
implementations from Arm Optimized Routines (AOR).
Also add some headers containing utilities for aarch64 libmvec
routines, and update libm-test-ulps.
Data tables for new routines are used via a pointer with a
barrier on it, in order to prevent overly aggressive constant
inlining in GCC. This allows a single adrp, combined with offset
loads, to be used for every constant in the table.
Special-case handlers are marked NOINLINE in order to confine the
save/restore overhead of switching from vector to normal calling
standard. This way we only incur the extra memory access in the
exceptional cases. NOINLINE definitions have been moved to
math_private.h in order to reduce duplication.
AOR exposes a config option, WANT_SIMD_EXCEPT, to enable
selective masking (and later fixing up) of invalid lanes, in
order to trigger fp exceptions correctly (AdvSIMD only). This is
tested and maintained in AOR, however it is configured off at
source level here for performance reasons. We keep the
WANT_SIMD_EXCEPT blocks in routine sources to greatly simplify
the upstreaming process from AOR to glibc.
Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
Linux 6.4 adds the riscv_hwprobe syscall on riscv and enables
memfd_secret on s390. Update syscall-names.list and regenerate the
arch-syscall.h headers with build-many-glibcs.py update-syscalls.
Tested with build-many-glibcs.py.
Trying to mount procfs can fail due multiples reasons: proc is locked
due the container configuration, mount syscall is filtered by a
Linux Secuirty Module, or any other security or hardening mechanism
that Linux might eventually add.
The tests does require a new procfs without binding to parent, and
to fully fix it would require to change how the container was created
(which is out of the scope of the test itself). Instead of trying to
foresee any possible scenario, if procfs can not be mount fail with
unsupported.
Checked on aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The tst-ttyname-direct.c checks the ttyname with procfs mounted in
bind mode (MS_BIND|MS_REC), while tst-ttyname-namespace.c checks
with procfs mount with MS_NOSUID|MS_NOEXEC|MS_NODEV in a new
namespace.
Checked on x86_64-linux-gnu and aarch64-linux-gnu.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
These files could be useful to any port that wants to use ld.so.cache.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
Few tests needed to properly check for asprintf and system calls return
values with _FORTIFY_SOURCE enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
The fread routine return value needs to be checked when fortification
is enabled, hence use xfread helper.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
On i386 and x86_64, for libc.a specifically, __mempcpy_chk calls
mempcpy which leads POSIX routines to call non-POSIX mempcpy indirectly.
This leads the linknamespace test to fail when glibc is built with
__FORTIFY_SOURCE=3.
Since calling mempcpy doesn't bring any benefit for libc.a, directly
call __mempcpy instead.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Replace alloca with a scratch_buffer to avoid potential stack overflows.
Checked on i686-gnu and x86_64-linux-gnu
Message-Id: <20230619144334.2902429-1-josimmon@redhat.com>
There is a potential memory leak for large writes due to writev being a
"shall occur" cancellation point. Add back the cleanup handler removed
in cf30aa43a5.
Checked on i686-gnu and x86_64-linux-gnu.
Message-Id: <20230619143842.2901522-1-josimmon@redhat.com>
With fortification enabled, read calls return result needs to be checked,
has it gets the __wur macro enabled.
Note on read call removal from sysdeps/pthread/tst-cancel20.c and
sysdeps/pthread/tst-cancel21.c:
It is assumed that this second read call was there to overcome the race
condition between pipe closure and thread cancellation that could happen
in the original code. Since this race condition got fixed by
d0e3ffb7a5 the second call seems
superfluous. Hence, instead of checking for the return value of read, it
looks reasonable to simply remove it.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Use a scratch_buffer rather than alloca to avoid potential stack
overflows.
Checked on i686-gnu and x86_64-linux-gnu
Message-Id: <20230608155844.976554-1-josimmon@redhat.com>
These functions are about to be added to POSIX, under Austin Group
issue 986.
The fortified strlcat implementation does not raise SIGABRT if the
destination buffer does not contain a null terminator, it just
inherits the non-failing regular strlcat behavior.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
With fortification enabled, fgets calls return result needs to be checked,
has it gets the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Different systems prefer a different divisors.
From benchmarks[1] so far the following divisors have been found:
ICX : 2
SKX : 2
BWD : 8
For Intel, we are generalizing that BWD and older prefers 8 as a
divisor, and SKL and newer prefers 2. This number can be further tuned
as benchmarks are run.
[1]: https://github.com/goldsteinn/memcpy-nt-benchmarks
Reviewed-by: DJ Delorie <dj@redhat.com>
This patch should have no affect on existing functionality.
The current code, which has a single switch for model detection and
setting prefered features, is difficult to follow/extend. The cases
use magic numbers and many microarchitectures are missing. This makes
it difficult to reason about what is implemented so far and/or
how/where to add support for new features.
This patch splits the model detection and preference setting stages so
that CPU preferences can be set based on a complete list of available
microarchitectures, rather than based on model magic numbers.
Reviewed-by: DJ Delorie <dj@redhat.com>
Current `non_temporal_threshold` set to roughly '3/4 * sizeof_L3 /
ncores_per_socket'. This patch updates that value to roughly
'sizeof_L3 / 4`
The original value (specifically dividing the `ncores_per_socket`) was
done to limit the amount of other threads' data a `memcpy`/`memset`
could evict.
Dividing by 'ncores_per_socket', however leads to exceedingly low
non-temporal thresholds and leads to using non-temporal stores in
cases where REP MOVSB is multiple times faster.
Furthermore, non-temporal stores are written directly to main memory
so using it at a size much smaller than L3 can place soon to be
accessed data much further away than it otherwise could be. As well,
modern machines are able to detect streaming patterns (especially if
REP MOVSB is used) and provide LRU hints to the memory subsystem. This
in affect caps the total amount of eviction at 1/cache_associativity,
far below meaningfully thrashing the entire cache.
As best I can tell, the benchmarks that lead this small threshold
where done comparing non-temporal stores versus standard cacheable
stores. A better comparison (linked below) is to be REP MOVSB which,
on the measure systems, is nearly 2x faster than non-temporal stores
at the low-end of the previous threshold, and within 10% for over
100MB copies (well past even the current threshold). In cases with a
low number of threads competing for bandwidth, REP MOVSB is ~2x faster
up to `sizeof_L3`.
The divisor of `4` is a somewhat arbitrary value. From benchmarks it
seems Skylake and Icelake both prefer a divisor of `2`, but older CPUs
such as Broadwell prefer something closer to `8`. This patch is meant
to be followed up by another one to make the divisor cpu-specific, but
in the meantime (and for easier backporting), this patch settles on
`4` as a middle-ground.
Benchmarks comparing non-temporal stores, REP MOVSB, and cacheable
stores where done using:
https://github.com/goldsteinn/memcpy-nt-benchmarks
Sheets results (also available in pdf on the github):
https://docs.google.com/spreadsheets/d/e/2PACX-1vS183r0rW_jRX6tG_E90m9qVuFiMbRIJvi5VAE8yYOvEOIEEc3aSNuEsrFbuXw5c3nGboxMmrupZD7K/pubhtml
Reviewed-by: DJ Delorie <dj@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Container management default seccomp filter [1] only accepts
personality(2) with PER_LINUX, (0x0), UNAME26 (0x20000),
PER_LINUX32 (0x8), UNAME26 | PER_LINUX32, and 0xffffffff (to query
current personality)
Although the documentation only state it is blocked to prevent
'enabling BSD emulation' (PER_BSD, not implemented by Linux), checking
on repository log the real reason is to block ASLR disable flag
(ADDR_NO_RANDOMIZE) and other poorly support emulations.
So handle EPERM and fail as UNSUPPORTED if we can really check for
BZ#19408.
Checked on aarch64-linux-gnu.
[1] https://github.com/moby/moby/blob/master/profiles/seccomp/default.json
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Since the area of the user's stack we use for the registers dump (and
otherwise as __sigreturn2's stack) can and does overlap the sigcontext,
we have to be very careful about the order of loads and stores that we
do. In particular we have to load sc_reply_port before we start
clobbering the sigcontext.
Signed-off-by: Sergey Bugaev <bugaevc@gmail.com>
epoll_pwait2(2)'s second argument should be nonnull. We're going to add
__nonnull to the prototype, so let's fix the test accordingly. We can
use a dummy variable to avoid passing NULL.
Reported-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
With fortification enabled, few function calls return result need to be
checked, has they get the __wur macro enabled.
Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Since the assembly source file with -evex suffix should use YMM registers,
not ZMM registers, include x86-evex256-vecs.h by default to use YMM
registers in memcmpeq-evex.S
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
Different than other 64 bit architectures, powerpc64 defines the
LFS POSIX lock constants with values similar to 32 ABI, which
are meant to be used with fcntl64 syscall. Since powerpc64 kABI
does not have fcntl, the constants are adjusted with the
FCNTL_ADJUST_CMD macro.
The 4d0fe291ae changed the logic of generic constants
LFS value are equal to the default values; which is now wrong
for powerpc64.
Fix the value by explicit define the previous glibc constants
(powerpc64 does not need to use the 32 kABI value, but it simplifies
the FCNTL_ADJUST_CMD which should be kept as compatibility).
Checked on powerpc64-linux-gnu and powerpc-linux-gnu.
For architecture with default 64 bit time_t support, the kernel
does not provide LFS and non-LFS values for F_GETLK, F_GETLK, and
F_GETLK (the default value used for 64 bit architecture are used).
This is might be considered an ABI break, but the currenct exported
values is bogus anyway.
The POSIX lockf is not affected since it is aliased to lockf64,
which already uses the LFS values.
Checked on i686-linux-gnu and the new tests on a riscv32.
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
The LoongArch glibc was using the value of the SHMLBA macro from common code,
which is __getpagesize() (16k), but this was inconsistent with the value of
the SHMLBA macro in the kernel, which is SZ_64K (64k). This caused several
shmat-related tests in LTP (Linux Test Project) to fail. This commit fixes
the issue by ensuring that the glibc's SHMLBA macro value matches the value
used in the kernel like other architectures.
Use a scratch_buffer rather than either alloca or malloc to reduce the
possibility of a stack overflow.
Suggested-by: Adhemerval Zanella Netto <adhemerval.zanella@linaro.org>
Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
If `non_temporal_threshold` is below `minimum_non_temporal_threshold`,
it almost certainly means we failed to read the systems cache info.
In this case, rather than defaulting the minimum correct value, we
should default to a value that gets at least reasonable
performance. 64MB is chosen conservatively to be at the very high
end. This should never cause non-temporal stores when, if we had read
cache info, we wouldn't have otherwise.
Reviewed-by: Florian Weimer <fweimer@redhat.com>
Linux 6.3 adds new constants MFD_NOEXEC_SEAL and MFD_EXEC. Add these
to bits/mman-shared.h (conditional on MFD_NOEXEC_SEAL not already
being defined, similar to the existing conditional on the older MFD_*
macros).
Tested for x86_64.
All fixes are in comments, so the binaries should be identical
before/after this commit, but I can't verify this.
Reviewed-by: Rajalakshmi Srinivasaraghavan <rajis@linux.ibm.com>
Applying this commit results in a bit-identical rebuild of
mathvec/libmvec.so.1 (which is the only binary that gets rebuilt).
Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
We do not want mach_i386.h to get installed into machine/, but into
i386/ or x86_64/ depending where mach_i386.defs was found, i.e.
according to 32/64 bitness.
