on S390, I get a compile error for dlfcn/tst-rec-dlopen.c:
tst-rec-dlopen.c: In function ‘malloc’:
tst-rec-dlopen.c:101:4: error: implicit declaration of function ‘strlen’ [-Werror=implicit-function-declaration]
(void) write (STDOUT_FILENO, message, strlen (message));
^
tst-rec-dlopen.c:101:42: error: incompatible implicit declaration of built-in function ‘strlen’ [-Werror]
(void) write (STDOUT_FILENO, message, strlen (message));
^
tst-rec-dlopen.c:112:42: error: incompatible implicit declaration of built-in function ‘strlen’ [-Werror]
(void) write (STDOUT_FILENO, message, strlen (message));
^
This patch adds the missing "#include <string.h>" for strlen.
ChangeLog:
* dlfcn/tst-rec-dlopen.c: Include string.h.
When trying to compile regression tests that use
C++ and the threads header you get this failure:
In file included from /usr/include/c++/5.3.1/cwchar:44:0,
from /usr/include/c++/5.3.1/bits/postypes.h:40,
from /usr/include/c++/5.3.1/bits/char_traits.h:40,
from /usr/include/c++/5.3.1/string:40,
from /usr/include/c++/5.3.1/stdexcept:39,
from /usr/include/c++/5.3.1/array:38,
from /usr/include/c++/5.3.1/tuple:39,
from /usr/include/c++/5.3.1/functional:55,
from /usr/include/c++/5.3.1/thread:39,
from tst-thread-quick_exit.cc:19:
../include/wchar.h:105:23: error: invalid conversion from ‘wchar_t*
(*)(wchar_t*, wchar_t, size_t) throw () {aka wchar_t* (*)(wchar_t*,
wchar_t, long unsigned int) throw ()}’ to ‘int’ [-fpermissive]
extern typeof (wmemset) __wmemset;
^
../include/wchar.h:105:25: error: expected ‘,’ or ‘;’ before ‘__wmemset’
extern typeof (wmemset) __wmemset;
^
The simplest fix for C++ is to avoid the use of
typeof and just declare the prototype as expected.
No regressions on x86_64. Committed as obvious.
The include/wchar.h header is only for internal
build uses and therefore is not ever seen by any
external users and needs no bug #.
The x86 / x86_64 implementation of nextafterl (also used for
nexttowardl) produces incorrect results (NaNs) when negative
subnormals, the low 32 bits of whose mantissa are zero, are
incremented towards zero. This patch fixes this by disabling the
logic to decrement the exponent in that case.
Tested for x86_64 and x86.
[BZ #20205]
* sysdeps/i386/fpu/s_nextafterl.c (__nextafterl): Do not adjust
exponent when incrementing negative subnormal with low mantissa
word zero.
* math/libm-test.inc (nextafter_test_data) [TEST_COND_intel96]:
Add another test.
The use of __USE_KERNEL_IPV6_DEFS with ifndef is bad
practice per: https://sourceware.org/glibc/wiki/Wundef.
This change moves it to use 'if' and always define the
macro.
Please note that this is not the only problem with this
code. I have a series of fixes after this one to resolve
breakage with this code and add regression tests for it
via compile-only source testing (to be discussed in another
thread).
Unfortunately __USE_KERNEL_XATTR_DEFS is set by the kernel
and not glibc, and uses 'define', so we can't fix that yet.
* scripts/check-local-headers.sh (exclude): Add hurd/ihash.h, and
include .*-.*/ in addition to .*-.*-.*/ (i.e. i386-gnu in addition to
i386-linux-gnu).
This patch call _exit instead of exit in failure case for the spawned
child in Linux posix_spawn{p} implementation.
Tested on x86_64.
[BZ #20178]
* sysdeps/unix/sysv/linux/spawni.c (__spawni_child): Call _exit
on failure instead of exit.
For Intel processors, when there are both L2 and L3 caches, SMT level
type should be ued to count number of available logical processors
sharing L2 cache. If there is only L2 cache, core level type should
be used to count number of available logical processors sharing L2
cache. Number of available logical processors sharing L2 cache should
be used for non-inclusive L2 and L3 caches.
* sysdeps/x86/cacheinfo.c (init_cacheinfo): Count number of
available logical processors with SMT level type sharing L2
cache for Intel processors.
The powerpc64 versions of ceil, floor, round, trunc, rint, nearbyint
and their float versions return sNaN for sNaN input when they should
return qNaN. This patch fixes them to add a NaN argument to itself to
quiet sNaNs before returning.
Tested for powerpc64.
[BZ #20160]
* sysdeps/powerpc/powerpc64/fpu/s_ceil.S (__ceil): Add NaN
argument to itself before returning the result.
* sysdeps/powerpc/powerpc64/fpu/s_ceilf.S (__ceilf): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_floor.S (__floor): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_floorf.S (__floorf): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyint.S (__nearbyint):
Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_nearbyintf.S (__nearbyintf):
Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_rint.S (__rint): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_rintf.S (__rintf): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_round.S (__round): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_roundf.S (__roundf): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_trunc.S (__trunc): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_truncf.S (__truncf): Likewise.
The powerpc32 versions of ceil, floor, round, trunc, rint, nearbyint
and their float versions return sNaN for sNaN input when they should
return qNaN. This patch fixes them to add a NaN argument to itself to
quiet sNaNs before returning. The powerpc64 versions, which have the
same bug, will be addressed separately.
Tested for powerpc32.
[BZ #20160]
* sysdeps/powerpc/powerpc32/fpu/s_ceil.S (__ceil): Add NaN
argument to itself before returning the result.
* sysdeps/powerpc/powerpc32/fpu/s_ceilf.S (__ceilf): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_floor.S (__floor): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_floorf.S (__floorf): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_nearbyint.S (__nearbyint):
Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_nearbyintf.S (__nearbyintf):
Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_rint.S (__rint): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_rintf.S (__rintf): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_round.S (__round): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_roundf.S (__roundf): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_trunc.S (__trunc): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S (__truncf): Likewise.
This is useful in situations where the long double type is
less precise than the type under test. This adds a new
wrapper macro LITM(x) to each type to append the proper
suffix onto macro constants found in math.h.
These are local to the test suite. Rename them as a macro starting
with lit_pi and a series of postfix operations to give us a constant
starting with lit_pi.
The lit prefix is intended to enable easy substitutions via
gen-test-libm.pl if needed.
The powerpc implementations of fabsl for ldbl-128ibm (both powerpc32
and powerpc64) wrongly raise the "invalid" exception for sNaN
arguments. fabs functions should be quiet for all inputs including
signaling NaNs. The problem is the use of a comparison instruction
fcmpu to determine if the high part of the argument is negative and so
the low part needs to be negated; such instructions raise "invalid"
for sNaNs.
There is a pure integer implementation of fabsl in
sysdeps/ieee754/ldbl-128ibm/s_fabsl.c. However, it's not necessary to
use it to avoid such exceptions. The fsel instruction does not raise
exceptions for sNaNs, and can be used in place of the original
comparison. (Note that if the high part is zero or a NaN, it does not
matter whether the low part is negated; the choice of whether the low
part of a zero is +0 or -0 does not affect the value, and the low part
of a NaN does not affect the value / payload either.)
The condition in GCC for fsel to be available is TARGET_PPC_GFXOPT,
corresponding to the _ARCH_PPCGR predefined macro. fsel is available
on all 64-bit processors supported by GCC. A few 32-bit processors
supported by GCC do not have TARGET_PPC_GFXOPT despite having hard
float support. To support those processors, integer code (similar to
that in copysignl) is included for the !_ARCH_PPCGR case for
powerpc32.
Tested for powerpc32 (configurations with and without _ARCH_PPCGR) and
powerpc64.
[BZ #20157]
* sysdeps/powerpc/powerpc32/fpu/s_fabsl.S (__fabsl): Use fsel to
determine whether to negate low half if [_ARCH_PPCGR], and integer
comparison otherwise.
* sysdeps/powerpc/powerpc64/fpu/s_fabsl.S (__fabsl): Use fsel to
determine whether to negate low half.
This patch removes various no-longer-used macros from libm-test.inc.
NO_TEST_INLINE_FLOAT, NO_TEST_INLINE_DOUBLE and M_PI_6l would have
been used before relevant tests were moved to auto-libm-test-in.
TEST_COND_x86_64 and TEST_COND_x86 were for tests in auto-libm-test-in
XFAILed for x86, and are no longer relevant now the bugs in question
have been fixed and the XFAILing removed (if future x86-specific
XFAILs become needed, they can always be added back).
Tested for x86_64 and x86.
* math/libm-test.inc (NO_TEST_INLINE_FLOAT): Remove macro.
(NO_TEST_INLINE_DOUBLE): Likewise.
(TEST_COND_x86_64): Likewise.
(TEST_COND_x86): Likewise.
(M_PI_6l): Likewise.
Replace most of the type specific macros with the equivalent
type-generic macro using the following sed replacement command below:
sed -ri -e 's/defined TEST_FLOAT/TEST_COND_binary32/' \
-e 's/ndef TEST_FLOAT/ !TEST_COND_binary32/' \
-e 's/def TEST_FLOAT/ TEST_COND_binary32/' \
-e 's/defined TEST_DOUBLE/TEST_COND_binary64/'\
-e 's/ndef TEST_DOUBLE/ !TEST_COND_binary64/' \
-e 's/def TEST_DOUBLE/ TEST_COND_binary64/' \
-e 's/defined TEST_LDOUBLE && //' \
-e 's/ifdef TEST_LDOUBLE/if MANT_DIG >= 64/' \
-e 's/defined TEST_LDOUBLE/MANT_DIG >= 64/' \
-e '/nexttoward_test_data\[\]/,/ };/!s/LDBL_(MIN_EXP|MAX_EXP|MANT_DIG)/\1/g' \
libm-test.inc
With a little extra manual cleanup to simplify the following case:
#if MANT_DIG >= 64
# if MANT_DIG >= 64
...
# endif
...
Note, TEST_LDOUBLE checks are replaced by MANT_DIG >= 64 excepting
where another property of the type is being tested. And, the final
regex is intended to avoid replacing LDBL_ macro usage within the
nexttoward tests which explicitly take argument 2 as long double.
Attempt to creatively redefine the macros
to choose tests based on the format being
tested, not the type.
Note, TS 18661 does not define any printf
modifiers, so we need to be a little more
verbose about constructing strings to
output.
The ldbl-128ibm implementations of ceill, floorl, roundl, truncl,
rintl and nearbyintl wrongly return an sNaN when given an sNaN
argument. This patch fixes them to add such an argument to itself to
turn it into a quiet NaN. (The code structure means this "else" case
applies to any argument which is zero or not finite; it's OK to do
this in all such cases.)
Tested for powerpc.
[BZ #20156]
* sysdeps/ieee754/ldbl-128ibm/s_ceill.c (__ceill): Add high part
to itself when zero or not finite.
* sysdeps/ieee754/ldbl-128ibm/s_floorl.c (__floorl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_rintl.c (__rintl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_roundl.c (__roundl): Likewise.
* sysdeps/ieee754/ldbl-128ibm/s_truncl.c (__truncl): Likewise.
The ldbl-128ibm implementation of sqrtl wrongly returns an sNaN for
signaling NaN arguments. This patch fixes it to quiet its argument,
using the same x * x + x return for infinities and NaNs as the dbl-64
implementation uses to ensure that +Inf maps to +Inf while -Inf and
NaN map to NaN.
Tested for powerpc.
[BZ #20153]
* sysdeps/ieee754/ldbl-128ibm/e_sqrtl.c (__ieee754_sqrtl): Return
x * x + x for infinities and NaNs.
The ldbl-128 implementations of j0l, j1l, y0l, y1l (also used for
ldbl-128ibm) return an sNaN argument unchanged. This patch fixes them
to add a NaN argument to itself to quiet it before return.
Tested for mips64.
[BZ #20151]
* sysdeps/ieee754/ldbl-128/e_j0l.c (__ieee754_j0l): Add NaN
argument to itself before returning result.
(__ieee754_y0l): Likewise.
* sysdeps/ieee754/ldbl-128/e_j1l.c (__ieee754_j1l): Likewise.
(__ieee754_y1l).
This patch adds more tests of signaling NaN inputs to libm-test.inc.
These tests are for a subset of functions with a single floating-point
input where no failures appeared in x86_64 or x86 testing. I intend
to investigate any failures of these new tests on some other
architectures before dealing with other functions.
Tested for x86_64 and x86.
* math/libm-test.inc (acosh_test_data): Add sNaN tests.
(atan_test_data): Likewise.
(ceil_test_data): Likewise.
(cos_test_data): Likewise.
(cosh_test_data): Likewise.
(erf_test_data): Likewise.
(exp2_test_data): Likewise.
(fabs_test_data): Likewise.
(floor_test_data): Likewise.
(ilogb_test_data): Likewise.
(j0_test_data): Likewise.
(j1_test_data): Likewise.
(jn_test_data): Likewise.
(lgamma_test_data): Likewise.
(lrint_test_data): Likewise.
(llrint_test_data): Likewise.
(logb_test_data): Likewise.
(lround_test_data): Likewise.
(llround_test_data): Likewise.
(nearbyint_test_data): Likewise.
(rint_test_data): Likewise.
(round_test_data): Likewise.
(sin_test_data): Likewise.
(sincos_test_data): Likewise.
(sinh_test_data): Likewise.
(sqrt_test_data): Likewise.
(tan_test_data): Likewise.
(tanh_test_data): Likewise.
(tgamma_test_data): Likewise.
(trunc_test_data): Likewise.
(y0_test_data): Likewise.
(y1_test_data): Likewise.
(yn_test_data): Likewise.
This patch adds support in libm-test.inc for tests with signaling NaN
arguments. gen-libm-test.pl is made to set a flag TEST_SNAN for such
tests, so that they can be disabled automatically when sNaN testing
isn't supported for a given type (at present, for float and double on
32-bit x86 because it's unpredictable when a value might be loaded
into a floating-point register and so automatically converted to long
double with sNaNs converted to quiet NaNs). -fsignaling-nans is used
where needed.
Tests are added for classification macros, as a starting point; this
is deliberately more conservative than Thomas's patch
<https://sourceware.org/ml/libc-ports/2013-04/msg00008.html>, to allow
more tests to be added, and issues exposed fixed, bit by bit.
Tested for x86_64 and x86.
* math/libm-test.inc: Update comment about NaN testing.
(TEST_SNAN): New macro.
(snan_value): Likewise.
(enable_test): Disable tests of sNaNs when SNAN_TESTS fails.
(fpclassify_test_data): Add sNaN tests.
(isfinite_test_data): Likewise.
(isinf_test_data): Likewise.
(isnan_test_data): Likewise.
(isnormal_test_data): Likewise.
(issignaling_test_data): Likewise.
(signbit_test_data): Likewise.
* math/gen-libm-test.pl (%beautify): Add snan_value.
(show_exceptions): Add argument $test_snan.
(parse_args): Handle snan_value as non-finite. Update call to
show_exceptions.
* math/Makefile (libm-test-no-inline-cflags): Add
-fsignaling-nans.
This patch fixes wrong/missing bits from the Fix {recv,send}{m}msg
standard compliance (BZ#16919) patches:
* nptl/Makefile sets CFLAGS-oldrecvfrom.c, but there's no such file as
oldrecvfrom.c. It should be oldsendmsg.c as defined by ChangeLog.
* sysdeps/unix/sysv/linux/hppa/Versions and
sysdeps/unix/sysv/linux/i386/Versions list a symbol recvms instead of
recvmsg at version GLIBC_2.24.
* nptl/Makefile (CFLAGS-oldrecvfrom.c): Remove rule.
(CFLAGS-oldsendmsg.c): Add rule.
* sysdeps/unix/sysv/linux/hppa/Versions [libc] (GLIBC_2.24):
Correct recvmsg symbol name.
* sysdeps/unix/sysv/linux/i386/Versions [libc] (GLIBC_2.24):
Likewise.
POSIX specifies that both msghdr::msg_iovlen and msghdr::msg_controllen
to be of size int and socklen_t respectively, however Linux implements
it as a size_t. So for 64-bits architecture where sizeof of size_t is
larger than socklen_t, both sendmmsg and recvmmsg need to adjust the
mmsghdr::msg_hdr internal fields before issuing the syscall itself.
This patch fixes it by operating on the padding if it the case.
For recvmmsg, the most straightfoward case, only zero padding the fields
is suffice. However, for sendmmsg, where adjusting the buffer is out
of the contract (since it may point to a read-only data), the function
is rewritten to use sendmsg instead (which from previous patch
allocates a temporary msghdr to operate on).
Also for 64-bit ports that requires it, a new recvmmsg and sendmmsg
compat version is created (which uses size_t for both cmsghdr::cmsg_len
and internal
Tested on x86_64, i686, aarch64, armhf, and powerpc64le.
* sysdeps/unix/sysv/linux/Makefile
[$(subdir) = socket] (sysdep_routines): Add oldrecvmmsg and
oldsendmmsg.
* sysdeps/unix/sysv/linux/aarch64/libc.abilist: Add recvmmsg and
sendmmsg.
* sysdeps/unix/sysv/linux/alpha/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/ia64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist: Likewise.
* sysdeps/sysv/linux/powerpc/powerpc64/libc-le.abilist: Likewise.
* sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist:
Likewise.
* sysdeps/unix/sysv/linux/x86_64/64/libc.abilist: Likewise.
* sysdeps/unix/sysv/linux/oldrecvmmsg.c: New file.
* sysdeps/unix/sysv/linux/oldsendmmsg.c: Likewise.
* sysdeps/unix/sysv/linux/recvmmsg.c (__recvmmsg): Adjust msghdr
iovlen and controllen fields to adjust to POSIX specification.
* sysdeps/unix/sysv/linux/sendmmsg.c (__sendmmsg): Likewise.
Continuing fixes for ceil, floor and trunc functions not to raise the
"inexact" exception, this patch fixes the versions used on older
powerpc64 processors. As was done with the round implementations some
time ago, the save of floating-point state is moved after the first
floating-point operation on the input to ensure that any "invalid"
exception from signaling NaN input is included in the saved state, and
then the whole state gets restored rather than just the rounding mode.
This has no effect on configurations using the power5+ code, since
such processors can do these operations with a single instruction (and
those instructions do not set "inexact", so are correct for TS 18661-1
semantics).
Tested for powerpc64.
[BZ #15479]
* sysdeps/powerpc/powerpc64/fpu/s_ceil.S (__ceil): Move save of
floating-point state after first floating-point operation on
input. Restore full floating-point state instead of just rounding
mode.
* sysdeps/powerpc/powerpc64/fpu/s_ceilf.S (__ceilf): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_floor.S (__floor): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_floorf.S (__floorf): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_trunc.S (__trunc): Likewise.
* sysdeps/powerpc/powerpc64/fpu/s_truncf.S (__truncf): Likewise.
Continuing fixes for ceil, floor and trunc functions not to raise the
"inexact" exception, this patch fixes the versions used on older
powerpc32 processors. As was done with the round implementations some
time ago, the save of floating-point state is moved after the first
floating-point operation on the input to ensure that any "invalid"
exception from signaling NaN input is included in the saved state, and
then the whole state gets restored rather than just the rounding mode.
This has no effect on configurations using the power5+ code, since
such processors can do these operations with a single instruction (and
those instructions do not set "inexact", so are correct for TS 18661-1
semantics).
Tested for powerpc32.
[BZ #15479]
* sysdeps/powerpc/powerpc32/fpu/s_ceil.S (__ceil): Move save of
floating-point state after first floating-point operation on
input. Restore full floating-point state instead of just rounding
mode.
* sysdeps/powerpc/powerpc32/fpu/s_ceilf.S (__ceilf): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_floor.S (__floor): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_floorf.S (__floorf): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_trunc.S (__trunc): Likewise.
* sysdeps/powerpc/powerpc32/fpu/s_truncf.S (__truncf): Likewise.
According to the latest Unicode standard, a conversion from/to UTF-xx has
to report an error if the character value is in range of an utf16 surrogate
(0xd800..0xdfff). See https://sourceware.org/ml/libc-help/2015-12/msg00015.html.
Thus this patch fixes this behaviour for converting from utf32 to internal and
from internal to utf8.
Furthermore the conversion from utf16 to internal does not report an error if the
input-stream consists of two low-surrogate values. If an uint16_t value is in the
range of 0xd800 .. 0xdfff, the next uint16_t value is checked, if it is in the
range of a low surrogate (0xdc00 .. 0xdfff). Afterwards these two uint16_t
values are interpreted as a high- and low-surrogates pair. But there is no test
if the first uint16_t value is really in the range of a high-surrogate
(0xd800 .. 0xdbff). If there would be two uint16_t values in the range of a low
surrogate, then they will be treated as a valid high- and low-surrogates pair.
This patch adds this test.
This patch also adds a new testcase, which checks UTF conversions with input
values in range of UTF16 surrogates. The test converts from UTF-xx to INTERNAL,
INTERNAL to UTF-xx and directly between UTF-xx to UTF-yy. The latter conversion
is needed because s390 has iconv-modules, which converts from/to UTF in one step.
The new testcase was tested on a s390, power and intel machine.
ChangeLog:
[BZ #19727]
* iconvdata/utf-16.c (BODY): Report an error if first word is not a
valid high surrogate.
* iconvdata/utf-32.c (BODY): Report an error if the value is in range
of an utf16 surrogate.
* iconv/gconv_simple.c (BODY): Likewise.
* iconvdata/bug-iconv12.c: New file.
* iconvdata/Makefile (tests): Add bug-iconv12.
rename test
When converting from UCS4LE to INTERNAL, the input-value is checked for a too
large value and the iconv() call sets errno to EILSEQ. In this case the inbuf
argument of the iconv() call should point to the invalid character, but it
points to the beginning of the inbuf.
Thus this patch updates the pointers inptrp and outptrp before returning in
this error case.
This patch also adds a new testcase for this issue.
The new test was tested on a s390, power, intel machine.
ChangeLog:
[BZ #19726]
* iconv/gconv_simple.c (ucs4le_internal_loop): Update inptrp and
outptrp in case of an illegal input.
* iconv/tst-iconv6.c: New file.
* iconv/Makefile (tests): Add tst-iconv6.
According to the latest Unicode standard, a conversion from/to UTF-xx has
to report an error if the character value is in range of an utf16 surrogate
(0xd800..0xdfff). See https://sourceware.org/ml/libc-help/2015-12/msg00015.html.
Thus the cu42 instruction, which converts from utf32 to utf16, has to be
disabled because it does not report an error in case of a value in range of
a low surrogate (0xdc00..0xdfff). The etf3eh variant is removed and the c,
vector variant is adjusted to handle the value in range of an utf16 low
surrogate correctly.
ChangeLog:
* sysdeps/s390/utf16-utf32-z9.c: Disable cu42 instruction and report
an error in case of a value in range of an utf16 low surrogate.
According to the latest Unicode standard, a conversion from/to UTF-xx has
to report an error if the character value is in range of an utf16 surrogate
(0xd800..0xdfff). See https://sourceware.org/ml/libc-help/2015-12/msg00015.html.
Thus the cu41 instruction, which converts from utf32 to utf8, has to be
disabled because it does not report an error in case of a value in range of
a low surrogate (0xdc00..0xdfff). The etf3eh variant is removed and the c,
vector variant is adjusted to handle the value in range of an utf16 low
surrogate correctly.
ChangeLog:
* sysdeps/s390/utf8-utf32-z9.c: Disable cu41 instruction and report
an error in case of a value in range of an utf16 low surrogate.
This patch reworks the existing s390 64bit specific iconv modules in order
to use them on s390 31bit, too.
Thus the parts for subdirectory iconvdata in sysdeps/s390/s390-64/Makefile
were moved to sysdeps/s390/Makefile so that they apply on 31bit, too.
All those modules are moved from sysdeps/s390/s390-64 directory to sysdeps/s390.
The iso-8859-1 to/from cp037 module was adjusted, to use brct (branch relative
on count) instruction on 31bit s390 instead of brctg, because the brctg is a
zarch instruction and is not available on a 31bit kernel.
The utf modules are using zarch instructions, thus the directive machinemode
zarch_nohighgprs was added to the inline assemblies to omit the high-gprs flag
in the shared libraries. Otherwise they can't be loaded on a 31bit kernel.
The ifunc resolvers were adjusted in order to call the etf3eh or vector variants
only if zarch instructions are available (64bit kernel in 31bit compat-mode).
Furthermore some variable types were changed. E.g. unsigned long long would be
a register pair on s390 31bit, but we want only one single register.
For variables of type size_t the register contents have to be enlarged from a
32bit to a 64bit value on 31bit, because the inline assemblies uses 64bit values
in such cases.
ChangeLog:
* sysdeps/s390/s390-64/Makefile (iconvdata-subdirectory):
Move to ...
* sysdeps/s390/Makefile: ... here.
* sysdeps/s390/s390-64/iso-8859-1_cp037_z900.c: Move to ...
* sysdeps/s390/iso-8859-1_cp037_z900.c: ... here.
(BRANCH_ON_COUNT): New define.
(TR_LOOP): Use BRANCH_ON_COUNT instead of brctg.
* sysdeps/s390/s390-64/utf16-utf32-z9.c: Move to ...
* sysdeps/s390/utf16-utf32-z9.c: ... here and adjust to
run on s390-32, too.
* sysdeps/s390/s390-64/utf8-utf16-z9.c: Move to ...
* sysdeps/s390/utf8-utf16-z9.c: ... here and adjust to
run on s390-32, too.
* sysdeps/s390/s390-64/utf8-utf32-z9.c: Move to ...
* sysdeps/s390/utf8-utf32-z9.c: ... here and adjust to
run on s390-32, too.
This patch reworks the s390 specific module to convert between utf16 and utf32.
Now ifunc is used to choose either the c or etf3eh (with convert utf
instruction) variants at runtime.
Furthermore a new vector variant for z13 is introduced which will be build
and chosen if vector support is available at build / runtime.
In case of converting utf 32 to utf16, the vector variant optimizes input of
2byte utf16 characters. The convert utf instruction is used if an utf16
surrogate is found.
For the other direction utf16 to utf32, the cu24 instruction can't be re-
enabled, because it does not report an error, if the input-stream consists of
a single low surrogate utf16 char (e.g. 0xdc00). This applies to the newest z13,
too. Thus there is only the c or the new vector variant, which can handle utf16
surrogate characters.
This patch also fixes some whitespace errors. Furthermore, the etf3eh variant is
handling the "UTF-xx//IGNORE" case now. Before they ignored the ignore-case and
always stopped at an error.
ChangeLog:
* sysdeps/s390/s390-64/utf16-utf32-z9.c: Use ifunc to select c,
etf3eh or new vector loop-variant.
This patch reworks the s390 specific module to convert between utf8 and utf16.
Now ifunc is used to choose either the c or etf3eh (with convert utf instruction)
variants at runtime. Furthermore a new vector variant for z13 is introduced
which will be build and chosen if vector support is available at build / runtime.
In case of converting utf 8 to utf16, the vector variant optimizes input of
1byte utf8 characters. The convert utf instruction is used if a multibyte utf8
character is found.
For the other direction utf16 to utf8, the cu21 instruction can't be re-enabled,
because it does not report an error, if the input-stream consists of a single
low surrogate utf16 char (e.g. 0xdc00). This applies to the newest z13, too.
Thus there is only the c or the new vector variant, which can handle 1..4 byte
utf8 characters.
The c variant from utf16 to utf8 has beed fixed. If a high surrogate was at the
end of the input-buffer, then errno was set to EINVAL and the input-pointer
pointed just after the high surrogate. Now it points to the beginning of the
high surrogate.
This patch also fixes some whitespace errors. The c variant from utf8 to utf16
is now checking that tail-bytes starts with 0b10... and the value is not in
range of an utf16 surrogate.
Furthermore, the etf3eh variants are handling the "UTF-xx//IGNORE" case now.
Before they ignored the ignore-case and always stopped at an error.
ChangeLog:
* sysdeps/s390/s390-64/utf8-utf16-z9.c: Use ifunc to select c,
etf3eh or new vector loop-variant.
This patch reworks the s390 specific module to convert between utf8 and utf32.
Now ifunc is used to choose either the c or etf3eh (with convert utf
instruction) variants at runtime.
Furthermore a new vector variant for z13 is introduced which will be build
and chosen if vector support is available at build / runtime.
The vector variants optimize input of 1byte utf8 characters. The convert utf
instruction is used if a multibyte utf8 character is found.
This patch also fixes some whitespace errors. The c variants are rejecting
UTF-16 surrogates and values above 0x10ffff now.
Furthermore, the etf3eh variants are handling the "UTF-xx//IGNORE" case now.
Before they ignored the ignore-case and always stopped at an error.
ChangeLog:
* sysdeps/s390/s390-64/utf8-utf32-z9.c: Use ifunc to select c, etf3eh
or new vector loop-variant.
This patch reworks the s390 specific module which used the z900
translate one to one instruction. Now the g5 translate instruction is used,
because it outperforms the troo instruction.
ChangeLog:
* sysdeps/s390/s390-64/iso-8859-1_cp037_z900.c (TROO_LOOP):
Rename to TR_LOOP and usage of tr instead of troo instruction.
